Related
well... some days ago my touch screen started to tilt.... some times it works, some times it don't...
my cel is an HTC Touch Dual Niki100...
i instaled another roms to correct the problem, but now it don't work anymore... =/
any ideas ???
it might be hardware problem, doesn't it ??
=/ i'm scary about having to change my screen... =/
DarkWz said:
well... some days ago my touch screen started to tilt.... some times it works, some times it don't...
my cel is an HTC Touch Dual Niki100...
i instaled another roms to correct the problem, but now it don't work anymore... =/
any ideas ???
it might be hardware problem, doesn't it ??
=/ i'm scary about having to change my screen... =/
Click to expand...
Click to collapse
I'm afraid it is a hardware problem, it happens to me a couple of days ago, the only solution is to change the motherboard.
Succes,
gee...
that's it then.... i'll see where i can find a tecnical support to do it for me =/
thx for the answer! ^^
Rataplan said:
I'm afraid it is a hardware problem, it happens to me a couple of days ago, the only solution is to change the motherboard.
Succes,
Click to expand...
Click to collapse
Where do you buy these spares rataplan?
DT
d_train said:
Where do you buy these spares rataplan?
DT
Click to expand...
Click to collapse
Hi, that's just the biggest problem, because the imei number is in the motherboard they simply don't sell them, so I bought a second hand phone with a broken screen and made one phone out of two.
Regards
DarkWz said:
that's it then.... i'll see where i can find a tecnical support to do it for me =/
thx for the answer! ^^
Click to expand...
Click to collapse
Here http://www.mikechannon.net/
touch problem
jest jakaś wersja softu bez kalibracji wstępnej ekranu dotykowego? dzienks
hii
i`v got the same problem still unsolved help and i think its a software thing because when u do the alignment screen thing it comes back to normal!
wolero36 said:
jest jakaś wersja softu bez kalibracji wstępnej ekranu dotykowego? dzienks
Click to expand...
Click to collapse
Plse use English, my Polish is really bad , It is possible to pass the bootscreen without calibration but I'm not sure you can find a rom who don't use it.
Sukces
kauazake said:
i`v got the same problem still unsolved help and i think its a software thing because when u do the alignment screen thing it comes back to normal!
Click to expand...
Click to collapse
Can you tell me more about the rom you are using.
It might not bee the mothelboard. Had this problem for a few months until my screen just went black one day!
Had to change the screen cable. It's a design flaw, each time you open the phone the cable gets scratched and soon the wires get clipped. I bought a new niki100 flex cable on ebay and open the phone and replaced it and put a small extra tape over the cable to be sure it would happen again...
problem
there is some version of software without the preliminary calibration of the touch screen of some time I hit on so... perhaps somebody will give bearings... thanks
placing a file name welcome.not on sdcard should bypass the welcome thing
hi, i'm new her.
but i had this problem to.
i bought an touch screen on dealextreme.com
it works great!
sorry for my bad english.
After month of using Ace I found bad pixel on my screen
What's even worst is that it's in the middle of the screen and I can see it all the time. Did install Dead Pixel Detect to confirm this and unfortunately it is there.
Does anyone know if repair center will give me new one or at least change the screen on this one?
It depense of your warranty... But for me, I know that they will give me a new one if I have this problem.
Reyoth said:
It depense of your warranty... But for me, I know that they will give me a new one if I have this problem.
Click to expand...
Click to collapse
I'll contact my warranty service and ask them about it, but I'm worried that they might want to change the screen and I don't want that.
After they changed screen and digitizer in my i900(I had white dot from overheating and poor digitizer - common problems with i900) it had specks of dust between the screen and the touch layer.
Hopefully they will give me new one. I'll keep you posted on my situation, maybe it'll be helpful to some
hi guys,
im having a problem with my evo 3d. it seems the lower part of the screen is not working. so i cannot unlock my phone now.
< 0 OK buttons are not working anymore but when i go to camera(no password required for some reason,) that part of the screen is working fine.
wanted to know how can i disable the password at least so i can use it and wanted to know if its a software or hardware problem
thanks
_Intel_ said:
hi guys,
im having a problem with my evo 3d. it seems the lower part of the screen is not working. so i cannot unlock my phone now.
< 0 OK buttons are not working anymore but when i go to camera(no password required for some reason,) that part of the screen is working fine.
wanted to know how can i disable the password at least so i can use it and wanted to know if its a software or hardware problem
thanks
Click to expand...
Click to collapse
is the phone rooted and if so, is it a custom rom?
How much of it isn't working? And is it just unresponsive or is the display out as well?
I have a strip of my screen the doesn't work that's righty over where the top row of keys is.
hi guys,
yes rooted,
virtuous rom dont know what version..
my phone has a passkey lock and the part where the "ok" button row is not working.
please let me know that i can at least disable the password lock..
_Intel_ said:
hi guys,
yes rooted,
virtuous rom dont know what version..
my phone has a passkey lock and the part where the "ok" button row is not working.
please let me know that i can at least disable the password lock..
Click to expand...
Click to collapse
So is it just a strip of the screen?
If you really really wanna be able to get it unlocked, Download the correct version of clockwork mod for our phone one that's not touch, has to use the volume rockers and fresh install the rom, Or as a matter of fact, Just boot into whatever recovery you have and clear data/factoryreset, that'll get rid of your lock pin
Hello from me too!
I have a strip on my touch screen that doesn't work. It's right where the Search button and Install on Play Store is and Clear on the Phone notifications, too.
It had the stock rom, I have replaced the screen with the digitizer when it fell down. It worked after that. I had to unscrew the phone one more time because my LCD was touching the screen and the phone had gone mad. After that, and a couple of days later, I noticed that the strip didn't work anymore. Today I finally flashed a new rom (King Cobra 3d) and nothing's changed so I figured it might be a hardware problem...
What's your opinion?
Thank you!
Common Hardware Problems on evo3D
Its the hardware. and your carrier should change it at no cost. (Sprint)
fatisis said:
Hello from me too!
I have a strip on my touch screen that doesn't work. It's right where the Search button and Install on Play Store is and Clear on the Phone notifications, too.
It had the stock rom, I have replaced the screen with the digitizer when it fell down. It worked after that. I had to unscrew the phone one more time because my LCD was touching the screen and the phone had gone mad. After that, and a couple of days later, I noticed that the strip didn't work anymore. Today I finally flashed a new rom (King Cobra 3d) and nothing's changed so I figured it might be a hardware problem...
What's your opinion?
Thank you!
Click to expand...
Click to collapse
ive had the top bar just under my notification bar non working for a few months now, and its starting to pi$$ me off
I've replaced my digitizer twice myself. I got a cheaper one the first time, and figure that's what I get for trying to go on the cheap. (I was out of warranty). Sorry to say it but it could be that again.
Sent from my shooter using xda app-developers app
I think I don't have a warranty because I've changed it myself. It's my fault...
I think I'll buy a new one... I unscrewed it a while ago so I could see if sth had been misplaced or if the digitizer had scratches or sth like that.
I saw that the ribbon's top had been ripped off right where it bends on top of the LCD... Don't know if that's the problem...
p.s. I live in Greece. My carrier is Cosmote. We don't have Sprint here...
Yep, if the ribbon cable is ripped, that would be your problem. Don't go too cheap on your replacement. Good luck!
Sent from my PG86100 using xda app-developers app
toad6386 said:
Yep, if the ribbon cable is ripped, that would be your problem. Don't go too cheap on your replacement. Good luck!
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I wonder why is there only one part of the touch that doesn't work if the ribbon is like that, in the bending spot...
thank you! i'll try it as soon as i can and i'll get back!
If i buy a new one from Amazon will it be allright? It costs around 10 pounds... The other one that i've changed and now it has a problem i've bought it for 60 euros from a local store here in Greece...
fatisis said:
If i buy a new one from Amazon will it be allright? It costs around 10 pounds... The other one that i've changed and now it has a problem i've bought it for 60 euros from a local store here in Greece...
Click to expand...
Click to collapse
The last one I got from Amazon is the one I'm using now (about a month old), and spent $20 US on it, which was NOT the cheapest of them. Not knowing the exchange rate right off hand, would venture to say the one you're speaking of is not a "cheap" one. So go for it. Just take your time replacing it and be careful with ALL the ribbon cables. Good luck!
:crying: I have HTC One X+ 64gb Telus which is rooted,s-off and boot loader unlocked. I am using Elegancia 6.2.0. I don't know what happened to it. Suddenly Capacitive buttons are not working as light are working. In past it never dropped and I Nevar sit on it. I don't know why it happened. Now i am using LMT launcher from which I am not satisfied and thinking about repairing it. In my city there are no HTC service center but there is a collection point(I don't know what it is??? ) . I searched about this on Internet and found that it may be problem of Digitizer. So, My questions are:
1. By replacing LCD+Digitizer would solve this problem? If yes, then which variant should I buy SHARP or SONY version? As mine is Telus version.
2. Should I go to Collection Point in my city ?
3. Or should I take risk of doing dis-assembly of it ?
4. Or Should I buy a LCD+Digitizer from internet and do replacement by local mobile repairs?
PS: I bought it 2 months ago from ebay and it doesn't have manufacturer warranty. And sorry for my bad english
veer.killerboy said:
:crying: I have HTC One X+ 64gb Telus which is rooted,s-off and boot loader unlocked. I am using Elegancia 6.2.0. I don't know what happened to it. Suddenly Capacitive buttons are not working as light are working. In past it never dropped and I Nevar sit on it. I don't know why it happened. Now i am using LMT launcher from which I am not satisfied and thinking about repairing it. In my city there are no HTC service center but there is a collection point(I don't know what it is??? ) . I searched about this on Internet and found that it may be problem of Digitizer. So, My questions are:
1. By replacing LCD+Digitizer would solve this problem? If yes, then which variant should I buy SHARP or SONY version? As mine is Telus version.
2. Should I go to Collection Point in my city ?
3. Or should I take risk of doing dis-assembly of it ?
4. Or Should I buy a LCD+Digitizer from internet and do replacement by local mobile repairs?
PS: I bought it 2 months ago from ebay and it doesn't have manufacturer warranty. And sorry for my bad english
Click to expand...
Click to collapse
Friend getting it replaced wont be the wisest decision, I would suggest you to try some other ROMs like ASOP CM10.2 version and see if the problem persists, since the lights are working. Hope if that dosent work replacing the LDC will take some thing around Rs 8000 Indian. I don't know about the make of the Sceen, but I guess going to the collection point might just help, else if you can get it to Bhopal or some thing.
Don't risk dis-assemble it, if you are not sure what you are doing .
Well getting the LCD+Digitizer from ebay I just don't know since it hard to find the OEM version ...
Good news !!!
ethanon said:
Friend getting it replaced wont be the wisest decision, I would suggest you to try some other ROMs like ASOP CM10.2 version and see if the problem persists, since the lights are working. Hope if that dosent work replacing the LDC will take some thing around Rs 8000 Indian. I don't know about the make of the Sceen, but I guess going to the collection point might just help, else if you can get it to Bhopal or some thing.
Don't risk dis-assemble it, if you are not sure what you are doing .
Well getting the LCD+Digitizer from ebay I just don't know since it hard to find the OEM version ...
Click to expand...
Click to collapse
:victory: Thanks a lot for reply friend, I think there is some problem in ELEGANCIA as I switched tp CM10.2 it works again normally, Now I am sure that it's not HARDWARE PROBLEM, its SOFTWARE. :good:
OBSERVATIONS OF CAPACITIVE BUTTON :
1. In ELEGANCIA works for 12 hrs(Approx)
switched to CM10.2, They working again... :good: :laugh: :victory:
veer.killerboy said:
:victory: Thanks a lot for reply friend, I think there is some problem in ELEGANCIA as I switched tp CM10.2 it works again normally, Now I am sure that it's not HARDWARE PROBLEM, its SOFTWARE. :good:
OBSERVATIONS OF CAPACITIVE BUTTON :
1. In ELEGANCIA works for 12 hrs(Approx)
switched to CM10.2, They working again... :good: :laugh: :victory:
Click to expand...
Click to collapse
Good to know it worked .
Hello guys,
As i mentioned in the title, i have a problem with my lg h860 variant, this problem is called ghost touch.
Someone have this problem, or any solution...i really don't know what to do, i would like to know if is a software issue or hardware, because i really don't wanna buy a new display if i am not sure about the problem.
Regards.
Oculle said:
Hello guys,
As i mentioned in the title, i have a problem with my lg h860 variant, this problem is called ghost touch.
Someone have this problem, or any solution...i really don't know what to do, i would like to know if is a software issue or hardware, because i really don't wanna buy a new display if i am not sure about the problem.
Regards.
Click to expand...
Click to collapse
As far as I know, ghost touch is almost always a digitizer hardware problem, but I stand to be corrected on that. Have you tried pulling the battery and leaving the phone off for a while (15+ minutes)?
Hai Karate said:
As far as I know, ghost touch is almost always a digitizer hardware problem, but I stand to be corrected on that. Have you tried pulling the battery and leaving the phone off for a while (15+ minutes)?
Click to expand...
Click to collapse
yes, i tried, and nothing has changed
any other ideeas?
Oculle said:
yes, i tried, and nothing has changed
any other ideeas?
Click to expand...
Click to collapse
I don't think you have that many options. Here are the things I would try, in order:
- Open the phone and disconnect the screen from the motherboard, then reconnect it
- Factory reset (back up the phone with LG Backup, or TWRP if you have a model that supports it)
- Replace the screen
I have a feeling that a factory reset isn't going to do much of anything, but it's worth trying before you spend money on a new screen.
Re: ghost touch
I had mine doing the same thing, I'm on a h820 however the screens weren't different amongst the variants as far as I know. Was able to get an oem replacement on Amazon for like 68$. The install wasn't all too difficult and did alleviate the ghost touch. Mine was bad bad before changing out the screen. Like it would press and hold the home button or the back button and make the phone unusable. No problems with the new screen so far.
Here's a link to the one I bought. It was two numbers off from the original one on the underside of the screen where the LG info is stamped.
Well it won't let me post the link.. Not enough posts. But it was from a US seller and said oem in the listing title.
Oculle said:
Hello guys,
As i mentioned in the title, i have a problem with my lg h860 variant, this problem is called ghost touch.
Someone have this problem, or any solution...i really don't know what to do, i would like to know if is a software issue or hardware, because i really don't wanna buy a new display if i am not sure about the problem.
Regards.
Click to expand...
Click to collapse
have you tried the touch screen calibration settings?