Just got a P1010 to do the hardware mod for a friend, and noticed the board lay out is different to the P1000 I think my friend thought the mod was the same the P1000.
So my question is do I need to do the same mod as the P1000 if so does anyone have the details for the P1010 ?
Thanks in advance for any help .....
I just solder anything using my OKI station .25years of lead fumes... my brain is shrinking..
DisQreet said:
Just got a P1010 to do the hardware mod for a friend, and noticed the board lay out is different to the P1000 I think my friend thought the mod was the same the P1000.
So my question is do I need to do the same mod as the P1000 if so does anyone have the details for the P1010 ?
Thanks in advance for any help .....
I just solder anything using my OKI station .25years of lead fumes... my brain is shrinking..
Click to expand...
Click to collapse
Must be you're in the wrong forum.
Related
pew pew pew
SHW-M240s uses a different WiFi driver , you're better off with stock
This was sent from a Galaxy Ace. Problem?
thank you for the reply
I knew that was a driver for the first time
Im really beginning to hate samsung
Why are they putting different modules for?
before i flash cm7,i thought it wouldnt work with 3g services
not the wifi commonly used around the world
Anyway,then can i replace the driver file with it?
or is there any kernel that can solve it?
thanks in advance
um...
Could you make a kernel for korean galaxy ace users?
i would be greatly appreciated if you could do it
Plzzzz help.....
LENAROX said:
Could you make a kernel for korean galaxy ace users?
i would be greatly appreciated if you could do it
Plzzzz help.....
Click to expand...
Click to collapse
Hi same problem as you. I'm not Korean, but I live in Korea. You should check Korean websites like Naver or Daumn for a Korean developer (this is the country of high-tech and education after all). I've been searching them..but my Korean isn't good and no ID number to post for help on them...plz post if you find a solution
thanks
Hi folks,
Bit of a strange one here but hoping someone can help me out. I am need of something like a plastic case cover that can be used to store a battery ....the size of the one used in the Samsung SII.
Been looking all over but no avail
If anyone can help it would be greatly appreciated :good:
gz023247 said:
Hi folks,
Bit of a strange one here but hoping someone can help me out. I am need of something like a plastic case cover that can be used to store a battery ....the size of the one used in the Samsung SII.
Been looking all over but no avail
If anyone can help it would be greatly appreciated :good:
Click to expand...
Click to collapse
There's a beatiful SII Accessories Forum going on here at xda, as a mod to move to take this thread over there.
gastonw said:
There's a beatiful SII Accessories Forum going on here at xda, as a mod to move to take this thread over there.
Click to expand...
Click to collapse
Hi,
Apologies for putting it into the wrong section. A mod has placed it here instead as you can't post questions in the Accessories forum :good:
I'm sure there's a thread about cases there.
Can't post a request in the accessories forum? That is just wrong.
Sent from the little guy
Hi, I'm a noob and need some help. I have purchased a Fusion5 Xtra from Amazon. It's a 10.1 screen, but it thinks it's a 7 inch. It looks as though the android software is for a phone not a tablet. Can anyone help with a ROM and instructions on putting a correct Android operating system on it.
Thanks in advance for any help.
Is there anyone who can help
pearlcorderman said:
Hi, I'm a noob and need some help. I have purchased a Fusion5 Xtra from Amazon. It's a 10.1 screen, but it thinks it's a 7 inch. It looks as though the android software is for a phone not a tablet. Can anyone help with a ROM and instructions on putting a correct Android operating system on it.
Thanks in advance for any help.
Click to expand...
Click to collapse
Just bumping this. Is there anyone who can help. I'm finding this so difficult to use now. could really do with some one to help please.
Is your the 4.2 kit kat version? as this theone i own.what is the problem? if you are looking for ROMs there's none I know about,but it can be rooted. But if your screen size might be wrong,go into display settings and you can change it.
Sent from my BS1078 using xda app-developers app
hello, i am novice android developer.
first, sorry to my English is poor..
I make call recorder with Galaxy S2 and S4 now. so i used Voice_downlink.
But it is not working.
I found that. but i can't find solution.
I find downlink is sometimes sealed by manufacturer because of hardware chipset.
if seal is true, i want to unseal by editing kernel source or S2 or etc...
my S2 is rooted.
please give me solution who knows. I'll very thanks to you and pleased.
Thanks to read my thread!
Dear forum friends, can I install a Samsung S2 I9100 logic board into a Samsung I777? Would that be compatible? I'm being offered an I9100 board for cheap but my display is I7777. My logic board works perfectly but the display died, so I wanted to know if the I9100 would work for me. Thanks!
calipjazz said:
Friends foreros a question I can place a logic card samsung samsung S2 I9100 I777 my bone would support my screen I777 are selling me an economic logic model badge but my screen is i9100 and i777 which works perfect it hurt me was the logic card and queia know if I can get this card which I will be selling model s2 i9100
Click to expand...
Click to collapse
Please try to reword your question because it is not understandable as you have written it. And then maybe someone will be able to offer the proper help. Thanks.
Sent from my Nexus 5 using Tapatalk
4-2ndtwin said:
Please try to reword your question because it is not understandable as you have written it. And then maybe someone will be able to offer the proper help. Thanks.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Dear forum friends, can I install a Samsung S2 I9100 logic board into a Samsung I777? Would that be compatible? I'm being offered an I9100 board for cheap but my display is I7777. My logic board works perfectly but the display died, so I wanted to know if the I9100 would work for me. Thanks!
forgive me I do not speak English
calipjazz said:
Dear forum friends, can I install a Samsung S2 I9100 logic board into a Samsung I777? Would that be compatible? I'm being offered an I9100 board for cheap but my display is I7777. My logic board works perfectly but the display died, so I wanted to know if the I9100 would work for me. Thanks!
forgive me I do not speak English
Click to expand...
Click to collapse
I would think it's "possible", but I've never done it or heard of anyone who has. Because the devices are virtually identical there's the chance it might work, but just installing an i9100 battery door on the i777 took a bit of work/small machining.
So basically if all of the holes line up theoretically it "should" work. Good luck, my friend, let us know how it goes.
SteveMurphy said:
I would think it's "possible", but I've never done it or heard of anyone who has. Because the devices are virtually identical there's the chance it might work, but just installing an i9100 battery door on the i777 took a bit of work/small machining.
So basically if all of the holes line up theoretically it "should" work. Good luck, my friend, let us know how it goes.
Click to expand...
Click to collapse
sure count on that gentleman