Related
i used GT-I9100G_LP7_ClockworkMod-Recovery_5.5.0.4 and odin to root my sgs2 g version everything is alright untill i copied root.zip into my phone and when i try to boot onto recovery mode , it will start within a few secs to home screen i cant install the root file help please
Do a factory rest ..and make the steps from the beginning
Sent from my GT-I9100G using xda premium
vincenteoh88 said:
i used GT-I9100G_LP7_ClockworkMod-Recovery_5.5.0.4 and odin to root my sgs2 g version everything is alright untill i copied root.zip into my phone and when i try to boot onto recovery mode , it will start within a few secs to home screen i cant install the root file help please
Click to expand...
Click to collapse
Aftr a reset
Go here
http://forum.xda-developers.com/showthread.php?t=1677819
Devices-
Samsung galaxy s2 i9100g (Cm9-Nightly build)
sony walkman 8 ( Cm9 Stable )
Blackberry 9300 cracked for bbm
Press thnks if i tried to help
i must factory reset / i followed this guide http://forum.xda-developers.com/showthread.php?t=1683800 but stuck at recovery mode
I didn't get it. You are not able to boot into recovery? If so then you haven't flashed CMW properly. Try again and get into recovery by volume up + center button + power button.
icyfox26 said:
I didn't get it. You are not able to boot into recovery? If so then you haven't flashed CMW properly. Try again and get into recovery by volume up + center button + power button.
Click to expand...
Click to collapse
i tried lotsa times already i got into recovery mode but i cant select the install zip file from sd card as it goes back to home screen when i try to select it
Hi,
I played inside the system files of my rooted SGA S5830i and accidently deleted a log file, I am sorry I don't remember the name. Now, I see an error message always when I open contacts - android.process.acore has stopped working. Same is the case when I open messages - and it takes me to HomeScreen. I tried downloading a lot of Gingerbread OS version .tar files for my model and nothin works through ODIN as well as through Recovery Mode.
Odin says 'connecting' but no luck. Tried different versions of ODIN, removed SD, removed SIM, removed battery and tried aagin and such, but nothing woked yet.Even tried different USB hubs.
Recovery mode just abort the installation of OS Zip file
So I am planning to root another SGA S5830i of my friend, take a back-up of OS and install it to my SGA. I don't think it will work as it never worked through any of the above mentioned methods to flash a ROM.
Can somebody help me in this matter, please ?
First of all, you have to read the RULES!
There is a separate section for questions and trouble shooting. POST IN CORRECT SECTION!
Install proper Samsung drivers. Make sure that odin detects port of the device.
Odin v. 3.07 supports firmware files without splitting. Other versions needs splitted firmware. Use splitfus to do that.
Flash custom roms via clockworkmod recovery.
Sent from my GT-S5830i using xda app-developers app
I tried with all versions of ODIN, but of no use.
Now when I tried through Recovery Mode, the error message says ' Thereis no enough space on the device '
Please Help !
If you want install ROM for your ace"i" you must buut your phone into download mode(not recovery mode/CWM) than install ROM with ODIN .
May I know the difference b/w Recovery Mode & Download Mode ?
What I understans from Recovery Mode is to Press Volume Up button + Home Screen button + Powen On button simultaneously.
Is that different from Download Mode ?
Please explain
Arus Chandran said:
May I know the difference b/w Recovery Mode & Download Mode ?
What I understans from Recovery Mode is to Press Volume Up button + Home Screen button + Powen On button simultaneously.
Is that different from Download Mode ?
Please explain
Click to expand...
Click to collapse
recovery mode : home button + power + vol up
download mode : power + vol up + vol down
to flash firmware thrugh odin,
boot into download mode..
to flash custom rom or to restore backup or to flash flashable zip boot into recovery mode..
Sent from my GT-S5830i using xda app-developers app
Good advice
srt99 said:
recovery mode : home button + power + vol up
download mode : power + vol up + vol down
to flash firmware thrugh odin,
boot into download mode..
to flash custom rom or to restore backup or to flash flashable zip boot into recovery mode..
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Some good advice on this problem from members but its a shame about the lack of responce from the member who had the problem I personaly would like to hear how things went, was the problem fixed after the advice was given
samsung gt-s5830i
hi im nikil
i have installed hyperion zip of galaxy y in galxay ace
it doesnt shows any download mode or recover mode
so pls help me to how to change rom without download mode
plssssssssssssssss
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
not screwed
promoking said:
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
Click to expand...
Click to collapse
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
hope he follows up with a thank you.
milindchitale said:
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
Click to expand...
Click to collapse
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hii,
Finally I reached on TWRP. Can I copy the Stock ROM Zip file in Memory Card and then install memory card on phone. And from Install in TWRP I can go the SD Card location and install it from there? Possible ?
Actually there was no battery on phone that is why the phone was not booting up to TWRP mode. Now I'm in TWRP and downloading Stock ROM. Hope it get fixed soon.
Many Thanks and Regards
promoking said:
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Click to expand...
Click to collapse
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
adfurgerson said:
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
Click to expand...
Click to collapse
Hi,
Now I'm downloading ...
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
I guess this is original ATT LG E970 Firmware. I will copy it into my external Memory Card and then will insert into phone. After that using TWRP I'll be going to use this Zip file and after that factory reset. Am I correct ? Do I need to follow different steps ?
Let me know. Moreover do I need to unlock Phone again? When I received it was already in Unlocked State. So installing the above link firmware will lock it again? Or should I proceed with the link I posted earlier, I mean this ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
And Rename File to .bin instead of .tot and Make ZIP it again ?
Please let me know.
PS ; I'm still Downloading The firmware from Ist link.
Regards
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hi, I tried these ROMS,
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
and downloaded today ..
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
Both are not working. ON TWRP it is saying ..
MD5 File NOT FOUND
ZIP File Signature VERIFICATION FAILED
Error in Flashing Zip
Please help?
Edit : I also tried Unticking ZIP File Verification. But still it says .. "Error in Flashing Zip"
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
pottyvick said:
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
Click to expand...
Click to collapse
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
promoking said:
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
Click to expand...
Click to collapse
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
pottyvick said:
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
Click to expand...
Click to collapse
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
promoking said:
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
Click to expand...
Click to collapse
in fast boot, what happens when you push the volume down button?
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
promoking said:
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
Click to expand...
Click to collapse
push the volume buttons, it will change the recovery mode to other options... Push the volume buttons on the handset...
pottyvick said:
in fast boot, what happens when you push the volume down button?
Click to expand...
Click to collapse
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
promoking said:
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
Click to expand...
Click to collapse
sorry, you're right... have you tried to manually get into download mode?
Poweroff phone>connect usb cable to phone (not to computer yet)>hold down (both) volume up/volume down>connect usb to computer (while holding down volume buttons)
pottyvick said:
It gives you only those 4 options? there is no other option>?
Click to expand...
Click to collapse
No Sir, I get only these 4 options above that Green Figure.
promoking said:
No Sir, I get only these 4 options above that Green Figure.
Click to expand...
Click to collapse
I edited my comment sorry...
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
shijopj2012 said:
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
Click to expand...
Click to collapse
I had a similar issue(more than once) and in my case I split the myFirmware file into it's 3 individual parts using Cygwin and SplitFUS2 and flashed from that with Odin 1.85. You could do this with FW file S5830IJPLK1_S5830IOJPLI1_XSG. I also used the pit file(cooperve_0623.pit), but I'm not sure if it was required but point is, it worked.
I also got out of trouble with the use of a backup which although not solid did get me out of trouble. The backup would not restore so I loaded ClockWorkMod recovery and in advanced restore, restored the system folder from my backup, this worked and got me into the phone. However you may not have a backup.
shijopj2012 said:
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
Click to expand...
Click to collapse
try using odin v1.85 and after flashing completes wipe the data and the cache using stock recovery and reboot
HOPE IT HELPS!
[email protected] said:
try using odin v1.85 and after flashing completes wipe the data and the cache using stock recovery and reboot
HOPE IT HELPS!
Click to expand...
Click to collapse
I tried with Odin 1.85 and it also shows failed. please see the attached screen shot.
thanks,
SHIJO
shijopj2012 said:
I tried with Odin 1.85 and it also shows failed. please see the attached screen shot.
thanks,
SHIJO
Click to expand...
Click to collapse
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Go to this link and download stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Go to this link and download stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot for the reply.. I will try it today and tell you the result.. Appreciates
regads,
shijopj2012 said:
Thanks a lot for the reply.. I will try it today and tell you the result.. Appreciates
regads,
Click to expand...
Click to collapse
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
shijopj2012 said:
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
Click to expand...
Click to collapse
Do a "Wipe data/ factory reset" from the stock recovery mod and reboot. That should solve it. Hope I Helped
shijopj2012 said:
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
Click to expand...
Click to collapse
Wipe data and cache from stock recovery and then reflash your device with odin
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Click to expand...
Click to collapse
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
Flash s5830i cwm.
Go to this link for cwm.
And then clear data cach and dalvik cache..and flash any stock based custom rom..
http://forum.xda-developers.com/showthread.php?t=1552792
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Wipe data and cache from stock recovery and then reflash your device with odin
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I have done it but still this issue of booting up persists. What do you think? Is it a hardware related issue or still I can make it live with some flashing techs....
thanks
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
If this solution doesn't work, then your only solution is USB Jig.
shijopj2012 said:
I have done it but still this issue of booting up persists. What do you think? Is it a hardware related issue or still I can make it live with some flashing techs....
thanks
Click to expand...
Click to collapse
It is not hardware related..just flash stock rom and this time check partition in odin..and this time i think your device boot problem is solve..just flash
Sent from my GT-S5830i using Tapatalk 2
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
First. u should download CMW for s5830i ,.copy it to your sd card.Then download a custom rom and flash it..
If u had made a backup before doing this u can restore it.In my case i restore it .if u encounter any error again inform me
amolgosavi said:
It is not hardware related..just flash stock rom and this time check partition in odin..and this time i think your device boot problem is solve..just flash
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Dear friend,
I have tried all the ways as you explained still the phone after power on SAMSUNG dispaly will come and then animation. Keep on repeating the same and never come the display to home. Is there anything else I can do to make live.... pelase
thank you!
shijopj2012 said:
Dear friend,
I have tried all the ways as you explained still the phone after power on SAMSUNG dispaly will come and then animation. Keep on repeating the same and never come the display to home. Is there anything else I can do to make live.... pelase
thank you!
Click to expand...
Click to collapse
Whenever I flash back my stock rom using odin on my Galaxy Ace, it gives me a bootloop just like yours. The simple solution for this is go to recovery mod and do a "Wipe data/ factory reset". That's it now reboot. It should work fine. Please try this. Hope I Helped
use Odin3 v1.84 for Samsung Galaxy Ace-i instead
Its working........great.........
If u want to flash then use "Odin3.v3.07.Cooperve" and also put "cooperve_0623.pit" in pit tab...........
why odin3 v3.07 can't detect my phone, my phone displays odin mode and at the bottom donloading do not turn off target, nothing happens..
I tried to reset my phone but it rebooted in the middle of restoring. now when i power on my phone all i get is a green android and what looks like restoring but then the phone just reboots after 3 seconds. if i press power and volume+ /volume- to enter clockwork mod i just get the same thing as when i power on. it looks like the phone is restoring but it just reboots. is there any way i can recover my phone using meta mode or factory mode, as i can't enter recovery. thanks for any help. note: i have tried to recover by this method, without success.
1. Download Lenovo drivers, unzip the archive. Turn off the phone and remove battery. Open device manager and connect the phone to PC. Watch for new devices. It will be displayed as МТ65хх Preloader. You need to be quick, because it will dissapear in some second. Click on it with the right button and select update driver. Point the wizard to the driver folder, it will install the correct driver automatically.
If it doesn't work with removed battery you can try to power on the phone and turn on developer options in settings or enter meta mode – hold Volume Down and Power buttons. Then connect the phone to PC again.
2. Download and extract Recovery zip and Flash tools. Run Flash Tools, click on DL DA All With Check Sum, load the scatter file located in Recovery folder, uncheck Preloader and hit Download (F6). Remove battery from phone and connect it to PC. When done, a green circle will appear.
3. Enter recovery mode – hold Volume Up, Volume Down and Power buttons until you see the logo. Make a backup of your current system first. Install new zip.
OK... most imp thing can you boot in normal mode??? if yes you just need to install android recovery. if not then you have to flash stock ROM ... download it from here needrom .com/mobile/lenovo-a820-12/ (remove the space between .com n needrom ) . in case you you just have problems with recovery then select only recovery in so flash else select all options.
hit thanks if you find it valuable.
omkarfrozen said:
OK... most imp thing can you boot in normal mode??? if yes you just need to install android recovery. if not then you have to flash stock ROM ... download it from here needrom .com/mobile/lenovo-a820-12/ (remove the space between .com n needrom ) . in case you you just have problems with recovery then select only recovery in so flash else select all options.
hit thanks if you find it valuable.
Click to expand...
Click to collapse
i can't get the phone to connect without the battery, i can only get it in factory or meta mode and in these modes i can't flash any rom.
if you can go into factory mode den mobile's perfectly fine. you just need to flash stock ROM once.
1) switch off your phone
2) open the sp flash tool
3) you will see Scatter-Loading option click it and locate the scatter file (it is present in the ROM folder you downloaded)
4)now press download button
5)after pressing download button connect your phone via USB cable
it may take 5-10 mins n you are done... you don't need to turn your phone ON...
it has worked for me