this is the changelog but it didnt say there that it supported jb leak 4.1.2... can i use this?
http://forum.xda-developers.com/showpost.php?p=34407376&postcount=16109
kentandrei said:
this is the changelog but it didnt say there that it supported jb leak 4.1.2... can i use this?
http://forum.xda-developers.com/showpost.php?p=34407376&postcount=16109
Click to expand...
Click to collapse
No, dont try it will not boot ur phone with that JB leak ROM on it for sure
instead u can try 'Phill' kernel
Sun90 said:
No, dont try it will not boot ur phone with that JB leak ROM on it for sure
instead u can try 'Phill' kernel
Click to expand...
Click to collapse
:good: thanks Sun90 for quick rply i'll just wait for kernel that support jbleak4.1.2 then.. thanks anywys.
kentandrei said:
:good: thanks Sun90 for quick rply i'll just wait for kernel that support jbleak4.1.2 then.. thanks anywys.
Click to expand...
Click to collapse
Ur welcome ma8, for now only 'Phil' kernel does support the new JB leak rom
sorry, link below for that kernel
http://forum.xda-developers.com/showthread.php?t=1877270
Does Philz kernel supports dual booting
Sent from my GT-I9100 using xda premium
jottermine said:
Does Philz kernel supports dual booting
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
No..its just stock kernel repacked with no emmc bug..
and please mate do some search before posting a qstn
Sun90 said:
Ur welcome ma8, for now only 'Phil' kernel does support the new JB leak rom
sorry, link below for that kernel
http://forum.xda-developers.com/showthread.php?t=1877270
Click to expand...
Click to collapse
sir sun90 i have a question.. i install galaxys2root.com rom leak jb by zedomax using odin directly and i want to change it by this one WanamLite Jelly Bean LSJ V13 and i dont have cmw and philz kernel.. do i have to install philz kernel so that i will have cmw? and if flash WanamLite Jelly Bean LSJ V13 rom does it still get the yellow triangle on boot? :silly:
Address me as sir and i'll answer.
postfatal said:
Address me as sir and i'll answer.
Click to expand...
Click to collapse
sir postfatal i have a question.. i install galaxys2root.com rom leak jb by zedomax using odin directly and i want to change it by this one WanamLite Jelly Bean LSJ V13 and i dont have cmw and philz kernel.. do i have to install philz kernel so that i will have cmw? and if flash WanamLite Jelly Bean LSJ V13 rom does it still get the yellow triangle on boot? :laugh:
kentandrei said:
sir postfatal i have a question.. i install galaxys2root.com rom leak jb by zedomax using odin directly and i want to change it by this one WanamLite Jelly Bean LSJ V13 and i dont have cmw and philz kernel.. do i have to install philz kernel so that i will have cmw? and if flash WanamLite Jelly Bean LSJ V13 rom does it still get the yellow triangle on boot? :laugh:
Click to expand...
Click to collapse
You don't have to call me sir to answer your question
Install PhilZ kernel, link HERE from stock recovery (you will not get yellow triangle) and then from CWM recovery of new kernel (reboot recovery first) you will be able to flash WanamLite v13.
Regards
Many40 said:
You don't have to call me sir to answer your question
Install PhilZ kernel, link HERE from stock recovery (you will not get yellow triangle) and then from CWM recovery of new kernel (reboot recovery first) you will be able to flash WanamLite v13.
Regards
Click to expand...
Click to collapse
thanks ma8 btw can i change the cmw version in philz cwm when creating a backup what should i do? and in backup can i use .tar instead of .dup?
kentandrei said:
thanks ma8 btw can i change the cmw version in philz cwm when creating a backup what should i do? and in backup can i use .tar instead of .dup?
Click to expand...
Click to collapse
Yes, in backup and restore section you have an option backup format. So change default format to tar and all of your backups will be created in tar version. For restoring you can you both formats.
Sent from my GT-I9100 using xda premium
thanks mate appreciate the quick help and no need to call you sir haha..
Related
Hi guys can anyone tell me why can't I flash a new kernel on my I9100XXLPH (baseband version) pls see attachment for current kernel and rom.
I use CMW to flash the Dorimanx 1.7 update but it says Kernel flash failed! No zImage was found
I followed Cf root instructions and was successful
I also restored this backup from CWM recovery
Thanks!
racoony said:
Hi guys can anyone tell me why can't I flash a new kernel on my I9100XXLPH (baseband version) pls see attachment for current kernel and rom.
I use CMW to flash the Dorimanx 1.7 update but it says Kernel flash failed! No zImage was found
I followed Cf root instructions and was successful
I also restored this backup from CWM recovery
Thanks!
Click to expand...
Click to collapse
try flashing the siyah kernel v3.4.1 instead of dorimanx and see,also baseband is nothing to do with ur kernel flashing for sure
Sun90 said:
try flashing the siyah kernel v3.4.1 instead of dorimanx and see,also baseband is nothing to do with ur kernel flashing for sure
Click to expand...
Click to collapse
CMW gave the same message no zImage found
what can I try more?
racoony said:
CMW gave the same message no zImage found
what can I try more?
Click to expand...
Click to collapse
btw I tried siyah v3.4.1 and dorimanx v5.3
racoony said:
btw I tried siyah v3.4.1 and dorimanx v5.3
Click to expand...
Click to collapse
try flashing a kernel cleaning script first and then flash the kernel and see.
also ensure the kernel zip file u dwnld'd is not corrupt or broken one
Thank you!
Sun90 said:
try flashing a kernel cleaning script first and then flash the kernel and see.
also ensure the kernel zip file u dwnld'd is not corrupt or broken one
Click to expand...
Click to collapse
Hi Sun90
Thank you! kernel cleaning script worked and now I am on siyah 3.4.1 and possibly on way to playing with other kernels and roms again... Awesome work thanks!
racoony said:
Hi Sun90
Thank you! kernel cleaning script worked and now I am on siyah 3.4.1 and possibly on way to playing with other kernels and roms again... Awesome work thanks!
Click to expand...
Click to collapse
glad i was of some help ma8
what script did u use to wipe the kernel
Sun90 said:
glad i was of some help ma8
Click to expand...
Click to collapse
Sun "we are not worthy"
Sent from my GT-I9100 using xda premium
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flush my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flushing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Donnie Sins said:
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Click to expand...
Click to collapse
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
appumohanty said:
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Click to expand...
Click to collapse
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
boki9999 said:
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
Click to expand...
Click to collapse
^^
But it should be possible through CWM...
Sent from the Matrix
Donnie Sins said:
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not flashing,
^^
But it should be possible through CWM...
Sent from the Matrix
Click to expand...
Click to collapse
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
appumohanty said:
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
Click to expand...
Click to collapse
have you tried flashing in download mode with odin?
boki9999 said:
have you tried flashing in download mode with odin?
Click to expand...
Click to collapse
no i will try it now and will let you know
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
appumohanty said:
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
Click to expand...
Click to collapse
Did you flash Siyah 5.0i?
boki9999 said:
Did you flash Siyah 5.0i?
Click to expand...
Click to collapse
i flash with latest 5.0.1, but i am getting black screen after after kernel booting,
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
alister91 said:
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
1. Siyah Kernal Odin version : Flash via Odin ( http://d-h.st/Bcf )
2. Enter into Siyah recovery and flash a compatibale ROM.
Done.
If you havent got a rom on your micro SD card
a) In siyah kernal mount USB storage.
b) Use an micro-sd reader to copy flashable zip
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately even dorimanx works .... you have to wait
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
http://db.tt/YceTd0pl flash a kernel cleaning script before you flash a new kernel
---------- Post added at 02:29 PM ---------- Previous post was at 02:25 PM ----------
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Siyah,Dorimanx kernel does not have a support yet in jb leaked xxlsj, but for sure they are working with it now..
Thanks A Lot
appumohanty said:
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
Click to expand...
Click to collapse
Thanks a lot man....had been searching around a lot for this...didnt wanna use odin... so was looking for a compatible siyah kernel...your post helped a lot....many thanks...
how to root leaked xxlsj 4.1.2 for s2??
gdstheking said:
how to root leaked xxlsj 4.1.2 for s2??
Click to expand...
Click to collapse
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Sun90 said:
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Click to expand...
Click to collapse
what about "Siyah-s2-v4.1.5"???
i flashed using philz kernal but no supersu >>??
Why not make a 3rd thread about that......you might get lucky.
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
given give a download link for supersu for philz kernel
Youu will not get root access if you flashed it via odin, download cmw version of it and.flash
Sent from my GT-I9100 using xda premium
philz kernel
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
droid_s2 said:
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
Click to expand...
Click to collapse
Here is the link bro sorry for late reply btw thanks for your thanks
http://forum.xda-developers.com/showthread.php?t=2031042
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
aboalghool said:
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
Click to expand...
Click to collapse
Yeah after flashing the firmware via odin ur phone will be unrooted
That 'exynos exploit' by 'chaingire' can also be used to root XXLSJ in just one click, without any flashing etc.
Sent from my GT-I9100 using xda premium
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
match_stick said:
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
Click to expand...
Click to collapse
When u flashed that leaked firmware, ur phone was already in stock but with TW 5 unrooted condition.
Secondly, for that triangle problem....Use the 'triangle away' app from play store.
Also, if u want official update then for few weeks more :/
Sent from my GT-I9100 using xda premium
Cool. I've heard some stories of hardbrick when using that app... but will most likely wait for the official update
sent from the unknown
cant get cwm in my jelly bean 4.1.2
rajjhamtani said:
cant get cwm in my jelly bean 4.1.2
Click to expand...
Click to collapse
Yeah me too can't solve this problem
CWM is not aviable in app list, but if is there SuperSU you are rooted. Boot into recovery (volume up+home+power) and Philz kernel should by there.
grisoxxl said:
CWM is not aviable in app list, but if is there SuperSU you are rooted. Boot into recovery (volume up+home+power) and Philz kernel should by there.
Click to expand...
Click to collapse
i work on siyah ...but its not flashing in my phone..
Siyah dont support 4.1.2 leak JB jet.
Philz is only one custom kernel what work with 4.1.2
grisoxxl said:
Siyah dont support 4.1.2 leak JB jet.
Philz is only one custom kernel what work with 4.1.2
Click to expand...
Click to collapse
i got it.
thank u for the help.!
:good:
u can get cwm and rooted ur phone on xxlsj here
http://forum.xda-developers.com/showthread.php?p=35083950#post35083950
hey guys.. i am on stock ics rom , unrooted. and i am going to flash cm10.1 on my s2, but am really confused, in some videos on youtube to root and get cwm they use cfroot wid the basband versions.. should i follow the method? and then flash cm10.1.? but in the cm 10.1 thread its mentioned to use the kernel specifed in the thread. but in the thread there are no baseband versions just a single .tar file... what should i do.. call me a noob but please help..! how should i proceed.. ?
Siddheshpatil said:
hey guys.. i am on stock ics rom , unrooted. and i am going to flash cm10.1 on my s2, but am really confused, in some videos on youtube to root and get cwm they use cfroot wid the basband versions.. should i follow the method? and then flash cm10.1.? but in the cm 10.1 thread its mentioned to use the kernel specifed in the thread. but in the thread there are no baseband versions just a single .tar file... what should i do.. call me a noob but please help..! how should i proceed.. ?
Click to expand...
Click to collapse
I think you are misunderstanding some things.. You must first root your phone with cf-root AND THEN, you must flash the Rom with the specified kernel. But you can take a shortcut by flashing siyah kernel. You don't need to rely on baseband version.
Sent with my homing pigeon
riro1612 said:
I think you are misunderstanding some things.. You must first root your phone with cf-root AND THEN, you must flash the Rom with the specified kernel. But you can take a shortcut by flashing siyah kernel. You don't need to rely on baseband version.
Sent with my homing pigeon
Click to expand...
Click to collapse
okay .. so here is what i will be doing..
1> root my phone using the cf root method,(that will be giving me cwm and root)
2> get into the recovery mode and flash cm 10.1.
3> wipe and clear the cache
4> install g apps..
5> install siyah kernel via recovery (the zip.)
6> reboot...
cool enough? should i proceed?
Siddheshpatil said:
okay .. so here is what i will be doing..
1> root my phone using the cf root method,(that will be giving me cwm and root)
2> get into the recovery mode and flash cm 10.1.
3> wipe and clear the cache
4> install g apps..
5> install siyah kernel via recovery (the zip.)
6> reboot...
cool enough? should i proceed?
Click to expand...
Click to collapse
No. Did you read the first post on the CM10.1 Thread?
You have to be running an ics stock rom and then root it.
Afterwards you can then proceed to flash CM10.1.
Kenrokks said:
No. Did you read the first post on the CM10.1 Thread?
You have to be running an ics stock rom and then root it.
Afterwards you can then proceed to flash CM10.1.
Click to expand...
Click to collapse
okay so according to this thread http://forum.xda-developers.com/showthread.php?t=1118693
- am on stock ics rom
- i'll flash this kernel via odin and root via superoneclick
-then get into recovery mode and flash cm10.1 and the gapps..
-then wipe and clear the cache..
- reboot.
now am i going correct?
btw my query is cf-root kernels they have mentioned kernel versions.. and in the thread (http://forum.xda-developers.com/showthread.php?t=1118693) they havent mentioned any.. wont that be a issue?
Don't use Siyah Kernel with CM10.1! Doesn't work!
Sent from my GT-I9100 using xda app-developers app
Siddheshpatil said:
okay so according to this thread http://forum.xda-developers.com/showthread.php?t=1118693
- am on stock ics rom
- i'll flash this kernel via odin and root via superoneclick
-then get into recovery mode and flash cm10.1 and the gapps..
-then wipe and clear the cache..
- reboot.
now am i going correct?
btw my query is cf-root kernels they have mentioned kernel versions.. and in the thread (http://forum.xda-developers.com/showthread.php?t=1118693) they havent mentioned any.. wont that be a issue?
Click to expand...
Click to collapse
Hey ma8 first use the siyah kernel v4.1.5 or v5.0.1(tar file for ODIN) form PC ODIN to root ur phone, to get a wrk'ng latest CWM recovery on ur phone
then follow the install instruction given in the CM10.1 thread to install the same, the CM10.1 rom comes with its own kernel that will replace siyah after install
Sun90 said:
Hey ma8 first use the siyah kernel v4.1.5 or v5.0.1(tar file for ODIN) form PC ODIN to root ur phone, to get a wrk'ng latest CWM recovery on ur phone
then follow the install instruction given in the CM10.1 thread to install the same, the CM10.1 rom comes with its own kernel that will replace siyah after install
Click to expand...
Click to collapse
so you mean to say that flashing the siyah kernal will directly give me root? Or will i have to use super one click app after flashing the kernel to gain root? One more thing have you tried the method you gave?
Yes it will, no need for any super one click. Once uve flashed siyah, reboot in recovery (which will now be cwm recovery), make a nandroid before you flash anything. Would be a good idea to back up your apps using titanium backup, your sms msgs with an app like sms backup and restore etc. Then proceed to flash the rom, gapps, make wipes etc.
Sent from my GT-I9100 using Tapatalk 2
Siddheshpatil said:
so you mean to say that flashing the siyah kernal will directly give me root? Or will i have to use super one click app after flashing the kernel to gain root? One more thing have you tried the method you gave?
Click to expand...
Click to collapse
Yes, siyah will directly give u root and no need for 'Super one click' ma8
yes its the tried and trusted method by me to root lot of my friends phones successfully
Sun90 said:
Yes, siyah will directly give u root and no need for 'Super one click' ma8
yes its the tried and trusted method by me to root lot of my friends phones successfully
Click to expand...
Click to collapse
Thanks bro will be flashing, just curious.. it's mentioned that there is a volume bug in cm10 and 10.1 and people say the output aint' that good... what do you say about that?
Hayth said:
Yes it will, no need for any super one click. Once uve flashed siyah, reboot in recovery (which will now be cwm recovery), make a nandroid before you flash anything. Would be a good idea to back up your apps using titanium backup, your sms msgs with an app like sms backup and restore etc. Then proceed to flash the rom, gapps, make wipes etc.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
hittd the thanks! .. i dont think i'll need to backup.. my device is new and blank...wid the stock stuff.
Siddheshpatil said:
Thanks bro will be flashing, just curious.. it's mentioned that there is a volume bug in cm10 and 10.1 and people say the output aint' that good... what do you say about that?
Click to expand...
Click to collapse
its a known bug for now ma8, may be future updates will address the issue
Siddheshpatil said:
hittd the thanks! .. i dont think i'll need to backup.. my device is new and blank...wid the stock stuff.
Click to expand...
Click to collapse
Its always gd to have a nandroid backup.. Just in case.
Sent from my GT-I9100 using Tapatalk 2
riro1612 said:
I think you are misunderstanding some things.. You must first root your phone with cf-root AND THEN, you must flash the Rom with the specified kernel. But you can take a shortcut by flashing siyah kernel. You don't need to rely on baseband version.
Sent with my homing pigeon
Click to expand...
Click to collapse
AND THEN... the yellow triangle.