[Q] [HELP] Galaxy Tab failed to mount /system in stock recovery - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Whenever I enter the recovery it says:
#MANUAL MODE#
--Updating application...
E: failed to mount /system (Invalid argument)
E: install_application_for_customer: Can't mount /system
Copy application failed.
--Appling Multi-CSC...
E: failed to mount system (Invalid argument)
E: Multi-csc: Can't mount /system
Multi-csc applied failed.
Click to expand...
Click to collapse
Is this a hardware problem, or could this be fixed by using Heimdall/Odin?

Related

[Q] Sorry! The application stopped unexpected. + pb wiping factory and cache a

Hello everyone,
after a long time on forums and posts, and beginning to be worry for my S2, i finally decided to open my thread.
I have a Samsung SII since 2011 (already 3 years). It is exactly a GT-I9100P.
when i'm starting it I have a circle of messages like:
" Sorry! the application Samsung Home (process com.sec.android.app.twlauncher) has stopped unexpectedly. Please try again
Force close"
I tap on Force close and it writes:
" Sorry! the application LogsProvider (process com.sec.android.provider.logsprovider) has stopped unexpectedly. Please try again
Force close"
I tap on Force close and it writes:
" Sorry! the application Google Services Framework (process com.google.process.gapps) has stopped unexpectedly. Please try again
Force close"
I tap on Force close and it writes the same message with each of my application that should start when my S2 starts.
Then there are always the 2 messges in circle with the application Samsung Home and the application LogsProvider.
As said in many posts, I succeeded in doing Power off, took the sim out and restarted in recovery mode (with hold Volume Up and Power at the same time) and it wrote:
-- Copying media files...
Successfully copied media files.
#MANUAL MODE #
-- Updating application...
E:install_application_for_customer:Can't unmount/preload
copy application failed.
-- Applying Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/FTM/system/'.
Successfully applied multi-CSC.
I did "Wipe data/factory reset" and it wrote:
-- Wiping data...
Formating/data...
Formatting /cache...
Data wipe complete.
E: failed to mount /efs (Invalid argument)
E: failed to mount /cache (Invalid argument)
E: can't mount /cache /recovery /log
E: can't open /cache /recovery /log
E: failed to mount /efs (Invalid argument)
E: failed to mount /cache (Invalid argument)
E: can't mount /cache /recovery /last_log
E: can't open /cache /recovery /last_log
E: failed to mount /efs (Invalid argument)
E: failed to mount /cache (Invalid argument)
I did "wipe cache partition" and it wrote:
-- Wiping cache...
Formatting /cache...
Cash wipe complete.
E: failed to mount /efs (Invalid argument)
E: failed to mount /cache (Invalid argument)
E: can't mount /cache /recovery /log
E: can't open /cache /recovery /log
E: failed to mount /efs (Invalid argument)
E: failed to mount /cache (Invalid argument)
E: can't mount /cache /recovery /last_log
E: can't open /cache /recovery /last_log
E: failed to mount /efs (Invalid argument)
E: failed to mount /cache (Invalid argument)
Apparently, my problem is not that simple and I now need to do something with Odin. There are so many different things I could do that I am a little lost. What procedure to do?
I saw this post well explained with many problems we can meet: http://forum.xda-developers.com/showthread.php?t=1841250 but i don't think there is mine...
Do i need to flash the ROM? (all explained in this nice post of ICS SGS TEAM ROM? : http://forum.xda-developers.com/showthread.php?t=1494493 )
thanks a lot for your help and i hope see you very soon!
Max

need some help here. i have just replaced the port on a galaxy s3 now have errors

booting the phone up hangs at the samsung logo
booting into stock recovery shows
recovery 3e
E:failed to mount /efs (invalid argument)
E:failed to mount /efs (invalid argument)
# Manual Mode #
-- Appling Multi-CSC...
Applied the CSC-code : unknown
Successfully applied multi-CSC.
E:failed to mount /data (invalid argument)
Cant mount '/data' (invalid argument)
E:failed to mount /data (invalid argument)
E:Cant mount /data/log/recovery_log.txt
need to try to repair this without losing any data
Your data is already gone, although you can use ADB to extract the whole data partition then use your pc to do data mining -but don't expect to recover much, if any.
Repair is trial and error, flash stock firmware then factory reset but your motherboard might already be toast.

[Q] 5.0 lollipop update error on nexus 4 16gb

E: failed to mount /cache (Invalid argument)
E: failed to mount /cache (Invalid argument)
E: Cant mount /cache/recovery/command
E: failed to mount /cache (Invalid argument)
E: Cant mount /cache/recovery/last_locale
locale is [(null)]
stage is[ ]
reason is [(null)]
fbo reports (possibly inaccurate):
command: "/sbin/recovery"
this is the error while updating to lollipop 5.0 on nexus 4...
during the first boot after update i waited for about six hours and the same boot animation kept on flashing and then the red light started flashing......and still stuck on the same problem..
please help sir.
thanks in advance
this is another one that i got from recovery logs...
E: failed to mount /cache (Invalid argument)
E: Cant mount /cache/recovery/log
E: Cant open /cache/recovery/log
E: failed to mount /cache (Invalid argument)
E: Cant mount /cache/recovery/last_log
E: Cant open /cache/recovery/last_log
E: failed to mount /cache (Invalid argument)
E: Cant mount /cache/recovery/last_install
E: Cant open /cache/recovery/last_install
E: failed to mount /cache (Invalid argument)
W: Cant unlink /cache/recovery/command

Failed to mount /system

I have a Galaxy Note 10.1 and someone used it without my knowledge. I was only getting the logo screen so I tried to do safe mode and I couldn't get to it. So I tried vol up + power and get this:
#manual mode#
Applying Multi-csc
Applied the csc-code : Xar
E:failed to mount /system (Invalid argument)
Can't mount '/system' (Invalid argument)
What did this person do to my tablet? How can I fix this?

Samsung galaxy tab 10.1 2016 staying in recovery mode and then turning off

I know this is the wrong place but there isn't a forum about the 10.1 2016 so i'm doing it here.
my screen is flickering.
when it is connected to a charger is automatically turns on, then it says installing system update but then it says erasing.
then it goes into recovery mode and says:
failed to open recovery_cause (no such file or directory)#
reboot recovery cause is [UNKNOWN]#
no support SINGLE-SKU
file based OTA
E: failed to mount /efs (invalid argument)
supported API:3
E: failed to mount /efs (invalid argument)
E: failed to mount /persdata (invalid argument)
wiping persdata
formatting /persdata
E: format volume: make ext4 failed on /dev/block/platform/13540000. dwmmc0/by-name/PERSDATA: I/O error
persdata wipe failed.
E: unknown volume for path [/odm]
E: unknown volume for path [/vendor]
E: failed to mount /efs (invalid agument)
dm-verity verification failed
E: failed to mount /cache (invalid agument)
E: failed to mount /cache (invalid agument)
E: failed to mount /system (invalid agument)
E: failed to mount /cache (invalid agument)
E: failed to mount /cache (invalid agument)
E: can't mount /cache/recovery/last_locale
and after 3 seconds it turns off for 1 second and then it does the same thing over and over again
Download your firmware on: https://www.sammobile.com/firmwares/
Download Odin tool to unblock your phone.
good luck
JonasHS said:
Download your firmware on: https://www.sammobile.com/firmwares/
Download Odin tool to unblock your phone.
good luck
Click to expand...
Click to collapse
but on what device do i download it because I cant download it on my tablet
You are need 1 PC and cable.
First download Qualcomm 9008 driver and download Odin and stock firmware.
Select your firmware in Odin and let program fix your tablet.
Ok so turns out i just needed a better charger and needed to charge it somewhere else because after leaving it to charge somewhere else i came back and the white line was gone and the screen wasn't flickering and the recovery menu was there.
Also how do i mark something as solved?

Categories

Resources