Related
Since I haven't seen many people here mentioning it, I thought it'd be useful to talk about my experience with Brando anti glare protector for Touch HD.
Few months ago, when I stockpiled on the protectors, I ordered one, just for the testing purposes. They were cheap, so I figured why not.
Now that my previously used ultra-clear protector got badly scratched and even deformed after a situation in which my Touch HD fell face down directly onto a neck of a beer bottle (don't ask) I realized I had to change it. The screen magically survived without any trace of contact, and I was very lucky for having the protector on - without it, I'm sure the screen would've had to be replaced.
Applying the protector
So, I pulled out the anti glare protector and applied it. First of all, the application procedure was slightly easier then with ultra-clear. The anti glare protector seems to be a bit stiffer and requires only one side of the protector to be peeled off before application, whereas the ultra needs 2 protective layers removed. It could also be simply the fact that I got some practice with these things now... But it felt easier in any case.
Fit
As with other Brando protectors, this one is also a bit too short on the bottom. If you start directly at the top of the device screen, leaving absolutely no space between the protector and the screen edge, at the bottom side you'll end up about 1.2 mm too short. For me it's not a big problem, and I certainly don't notice this, since the bottom part is usually covered by hand or fingers, but people who insist on perfection may find this annoying. The cut out for the speaker seems to sit well in it's place, and also be aware that there is a U-shaped cut out for the front camera. The ultra clear covers the camera, but obviously because of the grain-effect I'll get to in a moment, this was not possible here.
Brightness
After applying it I was very happy with the overall look. The screen brightness was the same - I did not notice any reduction in this regard, so I can say that this is very good in terms of transparency.
Sharpness and visibility
As for the sharpness / visibility, I'm hesitant to even say it, but there is a small difference when compared to ultra clear, or no protector of course. But it's a small difference. The effect is sort of like a very, very fine grain pattern across the screen, but I can't stress this enough - it's really no big deal. I'm a photographer and I work with graphic editing software, so my eyes are trained to notice every damn detail. For most people, I would assume that they would hardly notice any difference. So, to cut the long story short - the sharpness stays the same, but you get a gentle grain effect which is usually noticeable only on white background.
To sort of get a feeling of what you can expect, I can recommend you open up a bitmap in Photoshop and add 1 percent uniform noise filter. This is about the same amount of grain you'll see on the screen when using this protector.
Resistance to smudging
One very cool thing I noticed is that anti glare protector also seems to be MUCH, MUCH better when it comes to smudges. With ultra clear, I would usually feel a need to wipe the phone after each conversation or a typed SMS. Basically, any contact with skin would cause a mess on the screen. With anti glare, this is still present, but to much lesser extent. I feel that this is a big advantage when compared to ultra clear protector.
Touch sensation and sensitivity
Well, first of all, it does feel slightly different under your finger. Right after applying it, the finger movement across the screen felt rather stiff. There was definitively more friction going on then with ultra clear, but after one or two days of usage, this effect seems to wear off, or you simply get used to it and don't notice it anymore. I can say I have come to actually like this. Oh, and there is no degradation of screen sensitivity that I noticed. I did not feel that I had to push the screen any harder then before, so this is another strong point.
Anti-glare feature
And finally, what would be an anti glare protector review, without comment on the anti glaring From my non scientific tests, the feature works very well. The glaring is indeed much reduced. I would say about 50-60% less, if not even more. Also, when you do get some glare, for example from the direct light above your head, it's much less obtrusive then with ultra-clear or without protector. The effect is subtle, and will not interrupt you from reading things on the device.
Conclusion
All in all, if you can accept the slight grain effect, this is a great thing for people who use Touch HD in bright light or simply feel annoyed with the fact that the default screen protector is so polished you can sometimes see more of your face on it than the screen itself.
So, by sacrificing 5% of visual quality, you can get about 50% more on the usability. I don't regret buy it at all - in fact I only regret not ordering more on my last purchase.
p.s. I have absolutely no connection with Brando, nor I will get anything out of writing this review. I also have to say I have been ordering stuff from them for a while now, and have been very satisfied with their services so far.
That's a very in depth review which I am sure many will find useful.
I have a Brando Ultra Clear and have recently been using my HD in the garden as the weather in the UK has been so hot and sunny recently. I thought it would never work outside because of the bright light but with screen brightness setting on full I could not believe how good it was. No strain on the eye at all with the sun behind or in front. Not sure if this is because of the HTC screen or the Brando Ultra Clear protector - I've not tried it without.
Sounds like Anti Glare is even better from your review but I would say that Ultra Clear is still very useable in bright light.
Hi, been looking for a proper screen protector but haven't really gotten to it yet..
After reading this I'm convinced, I'm gonna get myself one!
...just can seem to locate one in the Netherlands...all shops sell the ultra clear (with anti glare in the descriptive text), but not just an anti glare one.
Anyone?
Thanks
*ordered through shop.brando etc..*
are you going to post some images?
Psygnosis84 said:
are you going to post some images?
Click to expand...
Click to collapse
Not gonna make any promises, but being a photographer, I guess I should
great review...I hate glare! So, I'm ordering one of these Brando anti-glare screen protectors.
Has anyone compared this Brando anti-glare to the Boxwave anti-glare?
As you say above "The effect is sort of like a very, very fine grain pattern across the screen".
The Boxwave has this and it is almost unacceptable (to me) and was wondering if this Brando was any better (clearer) in this department.
Thanks.
zozz said:
Has anyone compared this Brando anti-glare to the Boxwave anti-glare?
As you say above "The effect is sort of like a very, very fine grain pattern across the screen".
The Boxwave has this and it is almost unacceptable (to me) and was wondering if this Brando was any better (clearer) in this department.
Thanks.
Click to expand...
Click to collapse
Hi, I haven't used any Boxwave protectors, so I can't really say, but I am interested to hear from users that tried them.
Personally, I really got used to Brando anti-glare, and I find the device much more comfortable to use in everyday situations. And I really like the fact that the smudging is MUCH less of a problem.
Anyone know where these can be got in the UK?
**EDIT** Nevermind, I got it here - http://shop.brando.com
$3 shipping worldwide, $12 in total = just under £8...
AndyCr15 said:
Anyone know where these can be got in the UK?
**EDIT** Nevermind, I got it here - http://shop.brando.com
$3 shipping worldwide, $12 in total = just under £8...
Click to expand...
Click to collapse
http://www.inkino.co.uk/zen/index.php?main_page=index&cPath=69&zenid=ebdc7d2530edpgsgpjp2v0qbb1 in Tottenham Court Road fit them for you in case you've got a shaky hand
Not sure if they will have anti glare though.
zozz said:
Has anyone compared this Brando anti-glare to the Boxwave anti-glare?
As you say above "The effect is sort of like a very, very fine grain pattern across the screen".
The Boxwave has this and it is almost unacceptable (to me) and was wondering if this Brando was any better (clearer) in this department.
Thanks.
Click to expand...
Click to collapse
Hmm, I actually prefer Boxwave's grain pattern because it gives "texture" to the screen. Yeah it does lower the screen's image quality but overall it's quite nice I reckon
I got mine today, I really like it. It has a matt finish rather than a gloss finish which I prefer the feel of.
Unfortunately it took about 8 attempts to get it on without the edges slightly overlapping and causing the long bubble along the edge and now I think I have some dust under it
Still, it's a great fit, feels great but I have yet to see how well it's anti-glare properties hold up.
Brando, not so good
I have to disagree. At first I was very excited it about it but then... I find it horrible! I was not able to use it. Could not get rid of the bubbles. I think its cut too big! Wash it and nothing but dust gets caught on the backing that sticks to the screen which has some kind of glue like surface. After washing it gets marks all over and dust. I wasted my money. Expensive, not worth it, needs work. I have installed many screen protectors on my touch hd.
Nope, nope, nope... had none of those problems here...
I've had good luck with Brando compared to other protectors.
c6638746 said:
I have to disagree. At first I was very excited it about it but then... I find it horrible! I was not able to use it. Could not get rid of the bubbles. I think its cut too big! Wash it and nothing but dust gets caught on the backing that sticks to the screen which has some kind of glue like surface. After washing it gets marks all over and dust. I wasted my money. Expensive, not worth it, needs work. I have installed many screen protectors on my touch hd.
Click to expand...
Click to collapse
All you need is a steamy bathroom.
Has anyone bought an anti glare protector for the screen? I know there is a screen protector topic but they were more focus on just protecting the screen and not about anti glare.
acuralegendz said NuShield anti glare protector was only ok. I rather not pay 25 dollars for an average product.
I also saw link to Lexerd - Viewsonic G Tablet TrueVue Anti-Glare but I havnt heard any reviews on it yet.
I just ordered it yesterday from Amazon, as soon as it's in I'll be happy to let you know.
andygee said:
I just ordered it yesterday from Amazon, as soon as it's in I'll be happy to let you know.
Click to expand...
Click to collapse
I am going to assume that you are talking about the Lexerd - Viewsonic G Tablet TrueVue Anti-Glare. Can you test it in sunlight and indoor light? Thanks a lot
Yes I am, and yes I will be happy to. I don't think it will be here until the end of the week though so will be a few days.
i just installed this screen protector and I must say that the price is ridiculous for the quality.
It makes the screen quality completely grainy. Maybe I have to let it sit for a few hours.
Nice to the touch, has a mat feel. doesn't seem like it effects the touch sensitivity.
the edges are horrible. I can see it lifted all the way around the entire screen and i have no bubbles or dust around the edges but that will change soon. I just hope that as more dust gets trapped under the lifted edges, it doesn't make it worse over time but we will see.
I'm use to the screen protectors where you apply them on like window tints (Body Guardz brand). Had them on my ZuneHD, Droid1, Doid2. All perfect..Lexerd, not even close.
My opinion is that this screen protector should have been 10 dollars. sucks I got the double pack. sigh.
Adding pictures below
pics attached.
stigmax said:
i just installed this screen protector and I must say that the price is ridiculous for the quality.
It makes the screen quality completely grainy. Maybe I have to let it sit for a few hours.
Nice to the touch, has a mat feel. doesn't seem like it effects the touch sensitivity.
the edges are horrible. I can see it lifted all the way around the entire screen and i have no bubbles or dust around the edges but that will change soon. I just hope that as more dust gets trapped under the lifted edges, it doesn't make it worse over time but we will see.
I'm use to the screen protectors where you apply them on like window tints (Body Guardz brand). Had them on my ZuneHD, Droid1, Doid2. All perfect..Lexerd, not even close.
My opinion is that this screen protector should have been 10 dollars. sucks I got the double pack. sigh.
Adding pictures below
Click to expand...
Click to collapse
Thanks for the review stigmax. That sounds horrible even at 10 dollars. FYI there was a one pack of those protectors but little late to tell you that now.
Yea, I knew about the single pack but thought I could save a few bux with the double. After a few hours of use, my eyes got use to the grainy screen
Temp protector I guess, at least I dont have to worry about scratches: )
What I haven't seen elsewhere is that on the "Thank you for purchasing..." sheet that came with the G Tab, it states: "1. The device may come equipped with two anti glare screen protectors over the screen; which should be removed". Huh? Why two? Why remove them. It doesn't make sense. I assume because there is glare, that mine didn't come with them.
murdockr said:
What I haven't seen elsewhere is that on the "Thank you for purchasing..." sheet that came with the G Tab, it states: "1. The device may come equipped with two anti glare screen protectors over the screen; which should be removed". Huh? Why two? Why remove them. It doesn't make sense. I assume because there is glare, that mine didn't come with them.
Click to expand...
Click to collapse
Because at some point there were so many returns (at sears and staples) because of claims of a defective screen which later turn to be some air bubbles trapped under the second layer of the screen protector
I really like my nushield dayvue anti-glare protector. Puts my gtab on par with my xoom visibility wise.
Sent from my Xoom using Tapatalk
Anti-Glare
So has anyone found any good Anti-Glare that are not $30? just trying to find a good screen protector and case so I can stand it up and watch movies if need be.
Ever try Photodon?
http://www.photodon.com/p/MXH-5250-01.html seems nice based on their description but wondering if anyone ever tried one.
I ordered this set a couple weeks ago. One is clear and one is anti-glare:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290551331136&ssPageName=STRK:MEWNX:IT#ht_570wt_1140
They fit the screen perfectly. A little too perfectly actually. It's somewhat difficult to get the protector perfectly straight so that one side or the other doesn't run into the edge of the screen where the edge slightly goes up. I rendered the clear protector relatively useless after attempting to line it up perfectly several times.
Neither of the screen protectors have cut outs for the camera or the light sensor. It doesn't seem to really affect the light sensor, but the anti-glare protector makes the camera pretty much unusable. The camera is fine with the clear protector on.
The reason it makes it unusable is because of how grainy it makes the screen look, and that grain is also visible through the camera. It makes everything blurry. That said, it does a good job of reducing glare as well as a pretty darn good job of cutting down on visible finger prints. I've found that the graininess isn't extremely intrusive for most things. Maybe I've just gotten used to it.
One of the main reasons for purchasing my gTablet was to use it as an eReader for the hundreds of .pdfs I'm required to go through. This is where the grain really becomes troublesome. If it wasn't for the fact that somehow I managed to get the protector on perfectly straight on the first try, I would have already removed it. I'm thinking about ordering another set, cutting out a hole for the camera, and going with the clear protector. I'll make due with some glare here and there and some fingerprints.
bsweetness said:
I ordered this set a couple weeks ago. One is clear and one is anti-glare:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290551331136&ssPageName=STRK:MEWNX:IT#ht_570wt_1140
They fit the screen perfectly. A little too perfectly actually. It's somewhat difficult to get the protector perfectly straight so that one side or the other doesn't run into the edge of the screen where the edge slightly goes up. I rendered the clear protector relatively useless after attempting to line it up perfectly several times.
Neither of the screen protectors have cut outs for the camera or the light sensor. It doesn't seem to really affect the light sensor, but the anti-glare protector makes the camera pretty much unusable. The camera is fine with the clear protector on.
The reason it makes it unusable is because of how grainy it makes the screen look, and that grain is also visible through the camera. It makes everything blurry. That said, it does a good job of reducing glare as well as a pretty darn good job of cutting down on visible finger prints. I've found that the graininess isn't extremely intrusive for most things. Maybe I've just gotten used to it.
One of the main reasons for purchasing my gTablet was to use it as an eReader for the hundreds of .pdfs I'm required to go through. This is where the grain really becomes troublesome. If it wasn't for the fact that somehow I managed to get the protector on perfectly straight on the first try, I would have already removed it. I'm thinking about ordering another set, cutting out a hole for the camera, and going with the clear protector. I'll make due with some glare here and there and some fingerprints.
Click to expand...
Click to collapse
I'm curious if you could use a hole puncher to make a hole for the camera? I have not seen this product so I have no idea what it is like or how thick it is but seems like it could be modded with a hole punch if you do the measurements precisely. Anyways, just a thought I had while reading. Thanks for the review.
jetguy35 said:
I'm curious if you could use a hole puncher to make a hole for the camera? I have not seen this product so I have no idea what it is like or how thick it is but seems like it could be modded with a hole punch if you do the measurements precisely. Anyways, just a thought I had while reading. Thanks for the review.
Click to expand...
Click to collapse
You know, right before I put mine on, I thought to myself - "Should I run out and get a hole puncher for the camera before I do this? No, it should be fine."
I should have went to get a hole puncher. It would work perfectly.
Happy with my Protector
mernst2 said:
So has anyone found any good Anti-Glare that are not $30? just trying to find a good screen protector and case so I can stand it up and watch movies if need be.
Click to expand...
Click to collapse
I bought a matte one and a clear one from Aurum, but fit really well, I think you get get both for under $20. The matte reduces glare and the clear one does not distort the screen. Overall was very happy with the product. The Lexard one and those other "wet" applications ones are a pain in the ass, they also prevent your finger from gliding smoothly on the after application. I got them at Amazon here is the link http://www.amazon.com/s/ref=nb_sb_s...rum+viewsonic&x=0&y=0&sprefix=aurum+viewsonic
NuShield antiglare sheet or DayVue?
Synman said:
I really like my nushield dayvue anti-glare protector. Puts my gtab on par with my xoom visibility wise.
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
Just called NuShield, as their site does not work well with IE9 when placing orders, and was told they are currently NOT selling an "antiglare" sheet for the gTablet. They only have their "DayVue" product, which does not have anti-glare feature.
However, if you contact them, they very likely would consider making an anti-glare version as they already have a template for the gTablet.
[email protected]
I was just looking at their website and it describes the DayVue as anti-reflective. Straight from the website under Viewsonic GTablet.
NuShield DayVue™ antireflective film is the best choice for displays that are being used outdoors. It has good scratch resistance combined with greatly improved daylight readable optics over our antiglare film.
I don't know if they consider anti-glare and anti-reflective to be different, but it seems like the same to me.
ive got an antiglair, it works well and was only 10$ off amazon but if you like using it for videos it kills them, thinking about removing mine but i have a hard time throwing 10$ away
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Gemni69 said:
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Click to expand...
Click to collapse
How about checking the Skinomi thread in this very first page of this section ?
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Good Screen Protector
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
I have the Skinomi. I'm happy with it, but it does not appear to help with glare or screen angles (though, honestly, I only used it for a few minutes before installing the protector).
dj_justice said:
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Click to expand...
Click to collapse
which ones did you get?
-J
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Anyone have recommendations for screen protectors? Looking for helping with anti glare and no finger prints on it. Any info would be great. Thank for all the feedback so far.
Traderny said:
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
Click to expand...
Click to collapse
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
emersonlp said:
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
Click to expand...
Click to collapse
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
sjmoreno said:
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Click to expand...
Click to collapse
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Aurum Screen Protector
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
just my $0.02, but why not use the one by Zagg....?..
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Traderny said:
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
Click to expand...
Click to collapse
Thanks for the info, Traderny. Would you say that the Aurum screen protector allows for smoother gliding movements than the unprotected GTab screen? I'm hoping to find something that provides a nice swipe feel. Too often my fingers would "stick" to the naked screen or (less so, but still) the Skinomi protector.
My .2 cents
Traderny said:
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Click to expand...
Click to collapse
Wet application screen protectors have been around for a while and it has been shown to not be an issue if you follow the directions on installation. There are thousands of people that have used wet installation screen protectors here in the gTab forums that have reported no residual issues with the gTab during/after application.
Also, you don't spray liquid on the gTab, rather you're supposed to spray the liquid on both sides of the screen protector before application and dab up the excess liquid as you work it to the edges with the provided plastic card.
I've used both PET and this style of screen protectors on devices before and I prefer this over the PET as I have found the PET style protectors to be too shiny for my tastes.
Among the most helpful reviews for the PET protector on Amazon there are these comments:
1.) Good product, but a pain to put on. Just the slightest piece of dust will cause an air bubble.
2.) According to the packaging, this item is "Finger print free" and "Bubble free application". I experienced both. I would NEVER purchase this product again or recommend it.
Just goes to show you that people will find something to complain about no matter what the product is.
Protectors Protect
My experience with screen protectors on cell phones is that they are only good to protect the screen from damage. All of them will show fingerprints, smudges, grease and oil. This is esp. true with a touch screen. it's like wearing glasses you got to clean them alot. So save time money and headache by putting a microfiber cloth in the bag with your Gtab.
I went with the Exim anti-glare screen protectors, but did have to wait for shipping from China. I bought a complete skinomi skin set, and promptly botched the wet application of the screen protector, but since I wanted the anti-glare it just meant a week wait for the Chinese Air Mail which I had already ordered.
Overall I like the Exim, it was easy to install without any bubbles, though you might want to trim the corners a bit as its a very tight fit. I ended up cutting them off after applying it because I had the screen on perfectly without a single dust mote making a raised area. I don't mind a poorly cut corner, but do wish I had just done a quick trimming beforehand as I wasn't perfectly centered.
2 for $12.99... Was worth the wait.
Hey Naieve,
does it really help with the anti glare issue? Also does it have any issues with the touch screen interface? Is the screen protector to thick that it doesnt detect your finger movement on the screen? Any help on the finger print issues haha?
It helps some with the glare, definitely diffuses the light, but it looks more like a compromise in between a clear protector and some of the very heavy anti-glare screen protectors I've seen. I like it because of this actually. As to issues with the touch screen, I spent some time googling before buying, and while I forget where I read it the fact is there is no difference while using this protector. Even a light touch still works just fine. I wonder if that is the reason this AG protector diffuses less light, as I have heard of some AG protectors being too thick and screwing up touch. It does still show fingeprints, but its not that bad and is easy to clean. Definitely less noticeable than just the screen itself.
aasoror said:
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
Click to expand...
Click to collapse
I said I would update once my Aurum arrived. Like others have mentioned, there is no cutout for the camera or sensor - I don't know what effect that has nor do I really care. I never use the camera anyway.
The protector itself fits perfectly on the screen - it is so perfect that I had trouble aligning it properly and i would get halfway done installing it and notice it was running off the side of the screen slightly.
It took a few minutes to install because I did want it to be perfect. Now that it is installed I am really happy with it. My fingers slide better across the screen and there are far less fingerprints. I am happy with my purchase.
Does it really help to have a screen protector on STR? My nook is always inside a case, and always have some finger smudges on the screen, which does not interfere with reading the screen content.
Would it make the screen harder to use, such as in a resistive screen? I know it has IR technology, not resistive lcd, but it is good to know...
I have a screen protector, because I have cats and dogs who're lurking around my nook, and I'd hate to see them scratch the screen. I'm not using any case for it. The film does not affect the touch sensitivity in any way...
thanks for the info, emarusceac.
I can see dogs and cats and stuff being a problem. I just have an old NC sleeve laying around that works. If you can stand the wait, ebay is cheap Turns out the NC and NST width is the same...
emarusceac,
what sort of screen protector are you using?
Hi mh127,
I'm using a basic anti-glare screen film from ebay.
The nst is the first touch screen I have not used one on.
It is perfect now, the matte should hide small scratches, it gets used more lightly than phones/tablets, it is light (less damage if dropped), and it is cheap!
I am going to buy one.
I must warn you that it's VERY hard to apply it smoothly. I mean you'll get some air pouches caused by small particles, those bubbles won't go away no matter what you do. I prefer bubbles to permanent scratches though....
emarusceac said:
I must warn you that it's VERY hard to apply it smoothly. I mean you'll get some air pouches caused by small particles, those bubbles won't go away no matter what you do. I prefer bubbles to permanent scratches though....
Click to expand...
Click to collapse
I ordered one. Was concerned that it would be tough to apply because of the high frame around the screen. Any tips how to apply well? You use a credit card to smooth the film down over the screen?
Oh one more thing. Has anyone tried removing one? Does it change or damage the screen in any way?
I have had several different screen protectors on my NST and none of them caused any damage when I removed them. I would note though that I have read that you must not apply a screen protector to the Glowlight, something about the built in screen protector and its light guide properties. I would also point out the one reason my NST has had multiple screen protectors is because they are so hard to apply without getting bubbles/lint between the screen and the film. The film I have on now I finally got applied without any bubbles/lint in the reading area, so it will hopefully be on there for a while. Make sure you are working in a CLEAN area and take great pains to get it lined up straight before actually applying it to the screen.
The NST doesn't need a screen protector, it really wont do much for the device, but if you really feel like spending the money for it go ahead.
The NSTG already has a protector built in, putting an extra one on would be like putting on an extra pair of latex gloves. It'll offer a little more protection, but it can get to be quite frustrating in terms of lost control. It's advised not to bother with a protector for the NSTG.
Personally unless you know you're going to have your NST in reach of creatures with claws, or lose objects with sharp edges the protective screen will do little for you. Even in those cases it's possible the screen would merely lessen the damage done rather than prevent it out right.
In regards to the NSTG and it's pre-installed screen protector, has anyone actually removed it? I've read lots of reports of people complaining about minor scratches and finger pressure marks causing the light to become very strong on those parts, wondering if removing the screen protector would fix that or whether it's instead a problem with the screen.
Xadious said:
In regards to the NSTG and it's pre-installed screen protector, has anyone actually removed it? I've read lots of reports of people complaining about minor scratches and finger pressure marks causing the light to become very strong on those parts, wondering if removing the screen protector would fix that or whether it's instead a problem with the screen.
Click to expand...
Click to collapse
They claim there is one, I claim they lie as there is no visible edge of one. If there was you wouldn't get the light flares from minor scratches. Adding one may protect the screen but no idea what it would do to the light guide properties of the screen. If you ever have to remove it I'd worry what would happen to the light guide layer.
Because gadgets capabilities/sppecs increase rapidly & prices drop fast too, unless it's expensive I forget about screen protectors if the device is cheapish (got mine cheap) & if it will be outdated in a couple of years. Specially if it's not an outdoor device like my phone. Or if the protector hampers speed / functionality to some degree. Also personally I rarely scratch tab screens unless it's a phone, my phones/tabs all have protectors put on from day one, but not doing my NTSG. YMMV.
Hey all, I know this is probably the same order that everyone else is looking for, but I also know that new product is released probably every week. I'm looking for a dry film that I can buy for relatively cheap (>$15 at the absolute maximum but usually not willing to spend more than $9) for the regular S7. I use a Spigen Neo Hybrid with the lip around the front so it has to be case friendly or at least work with that case. Also, I would prefer it especially for film if I at least got multiples in a pack, if I wanted to spend $10 on one protector I'd just try fiddling with glass again.
I'm currently using the Spigen Curved Crystal which is almost disgustingly brittle and scratches too easily. If this was just more durable it would be perfect. It always seems like there's one major drawback for every product so far.
Also, please don't suggest wet-apply ones like ArmorSuit, IQ, etc. I've tried them, and even in a steamed room I always end up with dust underneath, and at least with the dry ones I can get it with tape. With the wet ones no matter what I use - tape, even my own fingers with solution on it, I can't get it out and just cause more to go in. No more wet protectors, I can't do them. The reason I had to pass on the Edge which I otherwise liked more was because the only protectors that work for it are wet apply and I know I can't put them on.
Akira Takamedo said:
Hey all, I know this is probably the same order that everyone else is looking for, but I also know that new product is released probably every week. I'm looking for a dry film that I can buy for relatively cheap (>$15 at the absolute maximum but usually not willing to spend more than $9) for the regular S7. I use a Spigen Neo Hybrid with the lip around the front so it has to be case friendly or at least work with that case. Also, I would prefer it especially for film if I at least got multiples in a pack, if I wanted to spend $10 on one protector I'd just try fiddling with glass again.
I'm currently using the Spigen Curved Crystal which is almost disgustingly brittle and scratches too easily. If this was just more durable it would be perfect. It always seems like there's one major drawback for every product so far.
Also, please don't suggest wet-apply ones like ArmorSuit, IQ, etc. I've tried them, and even in a steamed room I always end up with dust underneath, and at least with the dry ones I can get it with tape. With the wet ones no matter what I use - tape, even my own fingers with solution on it, I can't get it out and just cause more to go in. No more wet protectors, I can't do them. The reason I had to pass on the Edge which I otherwise liked more was because the only protectors that work for it are wet apply and I know I can't put them on.
Click to expand...
Click to collapse
Sadly Only Wet Install Films are of decent quality on the S7 Flat. For wet install, just take a bath with the shower, there should be steam in the bathroom after that. You can then proceed to install it on the restroom, don't worry about moisture as the S7 is IP68 Certified
i use them soft TPU screen protectors that you need to apply without water just like them old screen protectors. i buy them of aliexpress for like 75 cents a piece. I can give you a few tips for when your installing it like make your hands a bit wet so no dust comes off and only pull down a little bit of the plastic so you can line it up and then pull of the rest.
I tried so many screen protectors but most of them glass one's are fingerprint magnetes so thats why i use them soft one.s
RiTCHiE007 said:
i use them soft TPU screen protectors that you need to apply without water just like them old screen protectors. i buy them of aliexpress for like 75 cents a piece. I can give you a few tips for when your installing it like make your hands a bit wet so no dust comes off and only pull down a little bit of the plastic so you can line it up and then pull of the rest.
I tried so many screen protectors but most of them glass one's are fingerprint magnetes so thats why i use them soft one.s
Click to expand...
Click to collapse
I ordered one of these it will take some time. How it is holding so far? Any complaints? On a scale of 1 to 10 rate your satisfaction. Thanks in advance
Mozdef32 said:
I ordered one of these it will take some time. How it is holding so far? Any complaints? On a scale of 1 to 10 rate your satisfaction. Thanks in advance
Click to expand...
Click to collapse
I love it! Think they are way better then those old plastic screen protectors. They feel better when you swipe over the screen and when i first put it on my screen i had lots of small bubbles that where impossible to remove but after a day or 2 they where gone by them selfs and love the abti fingerprint coating. So overal im very happy with this one and not bad for a buck 50 and it came with a screen protector for the back side also.
Anything on Amazon. I went through 5 different protectors before I found one that was actually edge to edge.
RiTCHiE007 said:
I love it! Think they are way better then those old plastic screen protectors. They feel better when you swipe over the screen and when i first put it on my screen i had lots of small bubbles that where impossible to remove but after a day or 2 they where gone by them selfs and love the abti fingerprint coating. So overal im very happy with this one and not bad for a buck 50 and it came with a screen protector for the back side also.
Click to expand...
Click to collapse
Can you share where to buy them? Thanks.
Sent from my SM-G930F using Tapatalk