[Q] Galaxy S II (GSM) won't turn on or charge - Galaxy S II Q&A, Help & Troubleshooting

Hello there,
My friend gave me his dead SII to me today to fix, so here's the story:
He accidently took his phone in to a steam bath. Apparently the phone worked for 3 days after that without a problem, but finally stopped turning on. He tried to charge the phone, but he got a message about the phone overheating. He sent it in to a local phone repair company to get it fixed, but they would only replace the battery, which failed.
There are no evident signs of water damage on the device or logic board.
Any ideas?
Thanks in advance.

the mtherboard is toasted from water damage and not being dryed out before using.
Your friend most likely fried the board as evidenced by overheating without checking for water damage from the steam.
The water damage was probable dried by the overheating but not before the damage was done.
You will need a new board.

Thanks for the reply
Cosmic Blue said:
the mtherboard is toasted from water damage and not being dryed out before using.
Your friend most likely fried the board as evidenced by overheating without checking for water damage from the steam.
The water damage was probable dried by the overheating but not before the damage was done.
You will need a new board.
Click to expand...
Click to collapse
OK, thanks. Are sure there are not other alternatives?

georgew5 said:
OK, thanks. Are sure there are not other alternatives?
Click to expand...
Click to collapse
some odd ways on utube about cooking your phone in oven that might work ....

Re: won't turn on or charge
slimlo said:
some odd ways on utube about cooking your phone in oven that might work ....
Click to expand...
Click to collapse
I don't think I'll do that, but I'm in a very remote country here (Sultanate of Oman) and most parts are not easily available. It seems my only option is to clean the logic board more or find a used S II with a smashed/not-working display.

I wrote about this here..http://forum.xda-developers.com/showpost.php?p=34891900&postcount=19
Basically, the same problem as you mate - where can I buy a board from?
BTW - when you strip the phone, connect the battery to the piece of board you have in your hand (the main board only) and you will notice something getting extremely hot (where the USB ribbon would get plugged)

Does it get warm around the camera when it's charging?
Sent from my SGH-T499 using xda app-developers app

manuarh said:
I wrote about this here..http://forum.xda-developers.com/showpost.php?p=34891900&postcount=19
Basically, the same problem as you mate - where can I buy a board from?
BTW - when you strip the phone, connect the battery to the piece of board you have in your hand (the main board only) and you will notice something getting extremely hot (where the USB ribbon would get plugged)
Click to expand...
Click to collapse
Yeah, same, board gets hot in the same place.
I can get stuff shipped in from the UK, but noone is selling a board on eBay... the only thing I can do is get a smashed S II

Have you tried a jig? I heard that if it gets hot around the camera when charging, then it bay be able to use a jig.
Sent from my SGH-T499 using xda app-developers app

Johnny916 said:
Does it get warm around the camera when it's charging?
Sent from my SGH-T499 using xda app-developers app
Click to expand...
Click to collapse
My camera area is fine - but you're in luck, as you can buy that piece from eBay.
Mine gets extremely extremely extremely hot with just the battery - not even charging.
I read about reflow using hot air gun. Maybe this may work to solder back the joints which may be corroded - not enough knowledge I'm afraid.

Mine does the same thing, it gets but it doesn't get hot hot. Just warm enough to notice it.
I think it means that it's in a boot loop (explaining the hot battery usage) without the screen working.
Sent from my SGH-T499 using xda app-developers app

A thought...
Could it just be bricked, and I'm on a wild goose chase? I was reading about a HTC HD2 that got hard bricked and needed to be put on charge for 4 hours? I don't know. It seems unlikely.

Related

[Q] Water Damage,wont switch on

Ok i dropped my GS2 in water the other day aswel but i took it off within few seconds,I kept the battery and phone in uncooked rice overnight.Next morning when i try to switch it on, walla! it started perfectly until it showed low battery. I kept the phone on charge(battery with exclamation mark appeared on screen) then i tried to switch it back On after a while but it just wont start !! HELP
You could try the hair dryer trick..
Swyped from HTC Desire S using XDA Premium
Let it rest more. I dropped my laptop into water in the bathtub, not full of water, but the water was on. Waited two weeks and laptop was fine, no rice was used btw.
Sent from my Samsung Galaxy S II using the xda premium app.
The rice trick should have done it, I recommend it often, but I fear you may now have damaged the phone by not leaving it long enough and subsequently putting it on charge.
Also note, most phones have water damage litmus indicators in now so your warranty is screwed too.
Sent from my GT-I9100 using Tapatalk
alias_neo said:
The rice trick should have done it, I recommend it often, but I fear you may now have damaged the phone by not leaving it long enough and subsequently putting it on charge.
Also note, most phones have water damage litmus indicators in now so your warranty is screwed too.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Depends really, you can insure a phone at most stores these days and they will replace it regardless if you do. If your household insurance is all risk, this will cover your phone as well. (note both options costs extra money a month)
But if he does not have any of that he is indeed screwed.
Also, when dropping a phone in the water remove the battery and let it dry for at least 1 week. prefered 2 weeks. Do it in dry rice or with those moist absorbing packs you find in shoes and **** these days.
It's very possible only your battery is dead, considering the phone switched on fine and it's only the charging that doesn't work. Buy a cheap battery off ebay and try it out.
I think you might be right, If the phone would have been a goner it wouldn't have started at first.But i just cant find the water damage indicators on battery or phone,just to check if i can get it repaired through warranty
Syrellaris said:
Depends really, you can insure a phone at most stores these days and they will replace it regardless if you do. If your household insurance is all risk, this will cover your phone as well. (note both options costs extra money a month)
But if he does not have any of that he is indeed screwed.
Also, when dropping a phone in the water remove the battery and let it dry for at least 1 week. prefered 2 weeks. Do it in dry rice or with those moist absorbing packs you find in shoes and **** these days.
Click to expand...
Click to collapse
Well i guess ur right.Its not the first time my phone got water damaged.In past my HD2 actually sat in water for much much long time but then i kept the phone near heating for 4-5 days and it worked perfectly well.
(although the damage indicators turned red)
chelseafan said:
Ok i dropped my GS2 in water the other day aswel but i took it off within few seconds,I kept the battery and phone in uncooked rice overnight.Next morning when i try to switch it on, walla! it started perfectly until it showed low battery. I kept the phone on charge(battery with exclamation mark appeared on screen) then i tried to switch it back On after a while but it just wont start !! HELP
Click to expand...
Click to collapse
Hehehhe you are so dumb man ;-)
tooo sad
Do you know where are the water damage indicators on GS2 ??
chelseafan said:
I think you might be right, If the phone would have been a goner it wouldn't have started at first.But i just cant find the water damage indicators on battery or phone,just to check if i can get it repaired through warranty
Click to expand...
Click to collapse
I'm just speculating about the indicators on the sgs ii, it's common practice for other manufacturers to use them, often in plain sight. The gs ii, may not have any but if it does they're probably inaccessible inside.
Best bet is to examine some tear down photography. Maybe ifixit has one?
Sent from my GT-I9100 using Tapatalk
Uncooked rice is inefficient. Not sure why people use that when they can use either silica gel or desiccant, both of which come when you buy certain dry foodstuff or PC cases/computer parts/cameras (or you can buy it from the camera store). Is it worth saving a few dollars and risk the water being in your phone for that much longer?
alias_neo said:
I'm just speculating about the indicators on the sgs ii, it's common practice for other manufacturers to use them, often in plain sight. The gs ii, may not have any but if it does they're probably inaccessible inside.
Best bet is to examine some tear down photography. Maybe ifixit has one?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
http://www.ifixit.com/Teardown/Samsung-Galaxy-S-2-Teardown/5861/1
Do you see any water damage indicators ?
chelseafan said:
Ok i dropped my GS2 in water the other day aswel but i took it off within few seconds,I kept the battery and phone in uncooked rice overnight.Next morning when i try to switch it on, walla! it started perfectly until it showed low battery. I kept the phone on charge(battery with exclamation mark appeared on screen) then i tried to switch it back On after a while but it just wont start !! HELP
Click to expand...
Click to collapse
Hello everybody...
I'm almost in the same situation as chelseafan...
GS2 dropped in the water, switched off, tried to dry it with my hairdryer, then successfully switched on. Everything seemed to work just fine, but then it suddenly died and I couldn't turn it on again.
I probably didn't wait enough to let it dry (a couple of hours) and now it's in a box with rice and silica.
I couldn't find any water detector sticker or similar, is there any feedback for this kind of sensors on the GS2? I was just trying to understand if I can get it repaired in warranty or not...
Thanks to everybody!
I couldn't find any water detector sticker or similar, is there any feedback for this kind of sensors on the GS2? I was just trying to understand if I can get it repaired in warranty or not...
Nope water damage is chargeable .Indicator somewhere under the camera area .
jje
JJEgan said:
I couldn't find any water detector sticker or similar, is there any feedback for this kind of sensors on the GS2? I was just trying to understand if I can get it repaired in warranty or not...
Nope water damage is chargeable .Indicator somewhere under the camera area .
jje
Click to expand...
Click to collapse
Thanks jje, I'll try to let it dry some days more and then we'll see... Maybe I'm lucky!
Speaking from experience, rice works, but overnight is not enough, should have left it longer, next mistake is powering it on and charging it, water and electricity do not mix, that may be the stick that broke the camels back, but I hope not in your case.....
sachilleas said:
Link in orriginal post to ifixit
Do you see any water damage indicators ?
Click to expand...
Click to collapse
As I see it in the pictures there are two Water Indicator stickers in the phone.
1. In de corner of the battery compartment, down to the right
2. In de back housing, not the battery cover, between the small camera window and the speaker opening.
You can see them in the pictures 1 and 2 of Step 4.
Apparently Samsung uses white stickers with blue/purple crosses on it. They are about 3 by 3mm.
I've been lucky! After 3 days turned off and closed in a box with plenty of rice and silica, my GS2 is back and working perfectly! No issue detected so far!
So, a little list of suggestions after my bad experience:
1- GS2 is NOT waterproof
2- the fastest you take it out from water the best chances to have it working again you have
3- take out the battery as fast as you can and don't turn it on
4- silica and rice worked just fine for me, but be patient, you will need at least 3-4 days
5- be perseverant: after one day of treatement I couldn't switch on my GS2, but atter 3 days everything was ok!
Hope this will help others!
Sent from my GT-I9100 using XDA App

[Q] sgs2 damaged by rain/water

Here is my short story:
I lost my phone in the garden, after 3 days of searching and as the snow melted, i saw it lying on the ground, unfortunately turned off. Dont think this happend because of low battery rather than because of the water.
After i found it, i immediately dissassembled it without turning on and now its drying..i will wait for some days, until i can get some isopropanol(97% alcohol or so).
The water-indicator is lilac, not shure, but this means damaged by water, right?
So now here are my questions..is there even a chance that the isopropanol might help?..because the phone was turned on as i lost it, and i think it stopped working due to the water, not because of low battery..so is it already to late? Does this method only help if the phone is still working?
And which parts should be bathed in isopropanol ? E.g. is it bad for the camera, the microphones, the screen and the speakers, as i have read somewhere?
And if for example the screen would be damaged, would it be bad for the logicboard, too, if i reassemble it again and test it then?
And is there any possibility i can find out which part is defect, if it won´t work at all?
Are there any other options left for me?
hope this doesnt happen to anyone else
greets, electro
I would guess your screwed mate. My girls phone was dropped in water for less than 2 seconds and it killed. You are stuffed as soon as it turns off because something has shorted
Sent from my GT-I9100 using XDA App
Weird... I've gotten lots of rain onto my phone, and no damage at all... But of course that's not the same as dropping it in the snow...
Sadly there is no 100% solution for water damage. My dad once in a while will give a bath to his phones and the best solution I have found is to put the phone in a plastic bag full of rice and leave it there for as long as you can.
Of 3 phones 2 of them were saved using this method (one of them was saved multiple times).
Good luck.
johnebs said:
Sadly there is no 100% solution for water damage. My dad once in a while will give a bath to his phones and the best solution I have found is to put the phone in a plastic bag full of rice and leave it there for as long as you can.
Of 3 phones 2 of them were saved using this method (one of them was saved multiple times).
Good luck.
Click to expand...
Click to collapse
Where these phones still turned on as they got wet and you took them out of the water? Or had they turned off theirselves already?
Which parts of the phone should be bathed?
Thanks guys for your hope
Put it in a bowl of rice for a few days to let it dry out and see what happens.
Sent from my GT-I9100 using Tapatalk
nikzDHD said:
Put it in a bowl of rice for a few days to let it dry out and see what happens.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
It's worked for my old N73, but don't know will it work for GS2. but you can still try it
Just the board. If you drop the phone in it, it will damage other components. Then get a tooth brush and gently clean the board while alcohol is on it. Then check the battery for corrosion on the contacts to see if its fried. If so get a new one soon
Sent from my GT-I9100 using xda premium
infuse4g said:
Just the board. If you drop the phone in it, it will damage other components. Then get a tooth brush and gently clean the board while alcohol is on it. Then check the battery for corrosion on the contacts to see if its fried. If so get a new one soon
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
keep it away from mics. clean gently as above mentioned with a medium toothbrush. clean all the board but also clean the connectors such as the connector of lcd both on logic board and lcd itself. clean also all gold contacts such as antenna contacts, buzzer contacts ands earpiece contacts.
isopropanol should be sold on every pharmacy. and if you can find glass fiber sticks to clean gold plated contacts as i mentioned above only if they are corroded.
I have dissassembled my device to the logicboard+camera, there are no mics on it anymore, only problem might be the camera connected to it.
The rest of the phone(display,which is glued to the fronthousing i think, usb-connector, and speakers)is still in the front housing.
I´m on step 6 in ifixit.com teardown, only with camera still connected, if you want to see pics.(sry cant post links)
Everything is covered in rice for 24h now
Would it be okay for the camera to be bathed in alcohol? Because the camera is still connected to the logicboard, and i am not shure whether i should dare disconnecting it..its a very thin connector..??
Did anybody revive his device, which was already turned off because of the water damage? Is this even possible in theory, if the device already shut down itself?
I dont get my hopes up to high
But thanks all for your help mates
3l3ctr0 said:
Where these phones still turned on as they got wet and you took them out of the water? Or had they turned off theirselves already?
Which parts of the phone should be bathed?
Thanks guys for your hope
Click to expand...
Click to collapse
Usually the water will only freeze the phone and will remain on until you take the battery out or the battery power is depleted.
Just take it apart and put it in the bag of rice and forget abut it for a couple of days (*you should have already done this by now*).
As for the alcohol cleaning I'v never done that. The idea of the alcohol is to prevent rust but the rice will remove all humidity out of the phone.
Ok so after 4 days of drying, it now shows a triangle and a battery symbole.
Better than nothing i suppose, at least the screen seems to be working
Does anybody know what that symbole means? Is just the battery faulty(my hope)?
Battery or USB plug problem.
Try other battery, if that doesn't help, get new usb board thingy from ebay
Sent from my sgs2 running cm9 using xda app
Great news! I had the chance to try a battery from a friend, and it worked!!
Already ordered a new one, although I am not sure, maybe the voltage from the old one is just too low and recharging would solve the problem, but dont want to risk anything
Thanks for your responses all
I probably too late but no dont put the camera in alcohol
Sent from my GT-I9100 using xda premium
Congratz
Nice save!!

Any Ideas

So in the beginning of July I dropped my Rezound in some water, and it voided those water sensors on the back, and thought it has been functioning fine, you can notice that there is/was water under the very back of the screen when it is a white screen and it messes up from here to there but has worked alright. So I used my upgrade in March to get this phone and Verizon basically said I can buy a new phone at full price or else I'm screwed and stuck with it. Besides just finding someone on craigslist, ebay, etc.. anyone got any ideas on how I can get a new Rezound on the cheap or anything else 4g from Verizon on the cheap that isn't a turd, or somehow I can get a discount?
Just looking for any input, I'm fine with it now, but it's just annoying, and I'm not sure how long the phone will be operational.
Burkejt1 said:
So in the beginning of July I dropped my Rezound in some water, and it voided those water sensors on the back, and thought it has been functioning fine, you can notice that there is/was water under the very back of the screen when it is a white screen and it messes up from here to there but has worked alright. So I used my upgrade in March to get this phone and Verizon basically said I can buy a new phone at full price or else I'm screwed and stuck with it. Besides just finding someone on craigslist, ebay, etc.. anyone got any ideas on how I can get a new Rezound on the cheap or anything else 4g from Verizon on the cheap that isn't a turd, or somehow I can get a discount?
Just looking for any input, I'm fine with it now, but it's just annoying, and I'm not sure how long the phone will be operational.
Click to expand...
Click to collapse
Ur pretty much screwed bro
Do you not have insurance on your line?
Check out TeamBAMF's marketplace... they have some Thunderbolts and Rezounds for sale there.
Plug it into a charger, wrap it in a paper towel and put it in a bag of dry rice and let it sit for a few days. I've saved an iPhone and a camera that way.
Antoine.WG said:
Plug it into a charger, wrap it in a paper towel and put it in a bag of dry rice and let it sit for a few days. I've saved an iPhone and a camera that way.
Click to expand...
Click to collapse
Putting it on a charger doesn't even make any sense
Antoine.WG said:
Plug it into a charger, wrap it in a paper towel and put it in a bag of dry rice and let it sit for a few days. I've saved an iPhone and a camera that way.
Click to expand...
Click to collapse
Why do you plug in the charger?
Perhaps a little heat to help drive out the water? Just my guess.
Sent from my ADR6425LVW using Tapatalk 2
Burkejt1 said:
So in the beginning of July I dropped my Rezound in some water, and it voided those water sensors on the back, and thought it has been functioning fine, you can notice that there is/was water under the very back of the screen when it is a white screen and it messes up from here to there but has worked alright. So I used my upgrade in March to get this phone and Verizon basically said I can buy a new phone at full price or else I'm screwed and stuck with it. Besides just finding someone on craigslist, ebay, etc.. anyone got any ideas on how I can get a new Rezound on the cheap or anything else 4g from Verizon on the cheap that isn't a turd, or somehow I can get a discount?
Just looking for any input, I'm fine with it now, but it's just annoying, and I'm not sure how long the phone will be operational.
Click to expand...
Click to collapse
You can buy replacement stickers on Amazon.... Replace the stickers and warranty that ****
Sent from my ADR6425LVW using xda premium
topgun1953 said:
Why do you plug in the charger?
Perhaps a little heat to help drive out the water? Just my guess.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Exactly. Putting it on the dashboard of your car works too, just make sure it's completely covered in rice so it doesn't get too hot. After all, you can bake cookies on your dashboard nowadays.
Oh! I forgot to mention taking the back off, for better airflow. Removing the battery, SIM and SD card don't hurt either, but I don't think the charger will work if you remove the battery. None of my other phones ever have but I've never tried it with my Rezound.
Antoine.WG said:
Exactly. Putting it on the dashboard of your car works too, just make sure it's completely covered in rice so it doesn't get too hot. After all, you can bake cookies on your dashboard nowadays.
Oh! I forgot to mention taking the back off, for better airflow. Removing the battery, SIM and SD card don't hurt either, but I don't think the charger will work if you remove the battery. None of my other phones ever have but I've never tried it with my Rezound.
Click to expand...
Click to collapse
No, it doesn't work without a battery. Unless your in bootloader.
Sent from my ADR6425LVW using Tapatalk 2
Antoine.WG said:
Exactly. Putting it on the dashboard of your car works too, just make sure it's completely covered in rice so it doesn't get too hot. After all, you can bake cookies on your dashboard nowadays.
Oh! I forgot to mention taking the back off, for better airflow. Removing the battery, SIM and SD card don't hurt either, but I don't think the charger will work if you remove the battery. None of my other phones ever have but I've never tried it with my Rezound.
Click to expand...
Click to collapse
Putting it on the charger can make the water damage worse. Put it in the sun or something but don't put it on the charger. Water + electricity = kablam
AshtonTS said:
Putting it on the charger can make the water damage worse. Put it in the sun or something but don't put it on the charger. Water + electricity = kablam
Click to expand...
Click to collapse
Just like Pokémon.
Sent from my viperRez
wlmeng11 said:
Just like Pokémon.
Sent from my viperRez
Click to expand...
Click to collapse
exactly!
Tag798 said:
You can buy replacement stickers on Amazon.... Replace the stickers and warranty that ****
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Whaaat theres no way
Thanks for the input everyone
AshtonTS said:
Putting it on the charger can make the water damage worse. Put it in the sun or something but don't put it on the charger. Water + electricity = kablam
Click to expand...
Click to collapse
He did say it's been working fine other then the water in the phone...
You can check the marketplace here on XDA too. I've seen some rezounds for around $200.
We're only talking about 5V, 1A, which isn't a lot of power. Yes, at high voltage or high current, water and electricity don't mix but I'm sure he's charged it since he dropped it. I've saved devices in exactly this way in the past. Screens are the the hardest part to save, though. The touchscreen on my old iPhone needed to be replaced because the bottom half stopped responding to touches and the camera has a very faint shadow in the screen if you hold it at a certain angle in bright light. Both devices otherwise work perfectly but I hardly use them any more because they've been replaced by my Rezound.

usb acting up

My phone charges but it seems to be thinking it's always charging even when unplugged. I use it to play music at the bar I work at & it kept going in car docking mode which I never use. My battery was almost dead but it fully charged after the night was done. I went to change the battery to see if that was the problem and when I turned it off the battery charging image came up while it was off with nothing plugged in. Now my battery status keeps flashing & changes from regular size to mini size. Has anyone ever experienced this?
Sent from my SGH-I777 using xda premium
Searching goes a long way here my friend. This is a common problem for a lot of people. (I've never experienced it, but many others have). The solution seems to have been cleaning out the mini usb port on the phone with some 91% isopropyl rubbing alcohol and a que tip. Or if that doesn't work it may be a bad usb port.
Sent from Team Pirate's Secret Underground Base
Phalanx7621 said:
Searching goes a long way here my friend. This is a common problem for a lot of people. (I've never experienced it, but many others have). The solution seems to have been cleaning out the mini usb port on the phone with some 91% isopropyl rubbing alcohol and a que tip. Or if that doesn't work it may be a bad usb port.
Sent from Team Pirate's Secret Underground Base
Click to expand...
Click to collapse
I don't know what kind of Que tips you use but the ones I have don't fit. I used tissue folded over and it's still screwy. I think something's loose in the or something because sometimes shaking it makes it stop for a bit. If I get a new usb port from e bay will the one for the i9100 work in mine?
Sent from my SGH-I777 using xda premium
I guess I'm in the same boat with you. Noticed a couple of days ago the phone stopped making the little chime when you connect/disconnect the charger. Yesterday I took it off the charger and after a couple hours it was down to 40% without me using it. Today, I swapped batteries and had the same problem with the battery icon. One second it shows about 3/4 full, the next it says 100%. Then I couldn't get it to boot, just kept cycling through the battery icon. Got it booted and not only does it say charging when not connected, the USB icon is in the Stat bar saying it is MTP-connected. Guess it is time for warranty.:crying:
Miami_Son said:
I guess I'm in the same boat with you. Noticed a couple of days ago the phone stopped making the little chime when you connect/disconnect the charger. Yesterday I took it off the charger and after a couple hours it was down to 40% without me using it. Today, I swapped batteries and had the same problem with the battery icon. One second it shows about 3/4 full, the next it says 100%. Then I couldn't get it to boot, just kept cycling through the battery icon. Got it booted and not only does it say charging when not connected, the USB icon is in the Stat bar saying it is MTP-connected. Guess it is time for warranty.:crying:
Click to expand...
Click to collapse
Are you on a custom rom too? What do you think will be the replacement, the s3? I have insurance on it too, might have to go back to stock tho.
Sent from my SGH-I777 using xda premium
I'm on stock, but rooted. If they will give me an S3 I will be very happy. Having seen how many people have had issues with the crappy USB connector on this phone, I may have to insist.
The likely option will be the sky rocket... maybe the oneX. Unfortunately, I don't see them giving out S3's.
Clay
Team Pirate
Sent from my PINK GSwagger2
clay101eve said:
The likely option will be the sky rocket... maybe the oneX. Unfortunately, I don't see them giving out S3's.
Clay
Team Pirate
Sent from my PINK GSwagger2
Click to expand...
Click to collapse
Isn't that like a downgrade? If rather fix it myself by buying a usb port from eBay.
Sent from my SGH-I777 using xda premium
ZephCr said:
Isn't that like a downgrade? If rather fix it myself by buying a usb port from eBay.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Sky rocket yes. I wouldn't say the one x is a downgrade necessarily
At this point I might be ready to get away from Samsung. My SI had to be replaced 3 times. The S2 has had some weird issues, but worked until this started 2 days ago. I had an HTC before (WinMo) that is still working fine today. Maybe I'll have better luck with the 1X seeing how apparently Samsung can't make phones that last.
I got an S2 as a replacement. Not a Skyrocket, so it depends on when you call. Otherwise all they would offer me was the skyrocket or 2 windows phones.
Sent from Team Pirate! Using Tapatalk 2
What do you think would be easier, getting the part & fixing it myself or using Odin with a tricky usb port to revert back to stock? I also lost my att splash screen by using that gs2 boot screen changing app. I got rid of the app a while back & have used a couple different roms but it seems permanent.
Sent from my SGH-I777 using xda premium
ZephCr said:
What do you think would be easier, getting the part & fixing it myself or using Odin with a tricky usb port to revert back to stock? I also lost my att splash screen by using that gs2 boot screen changing app. I got rid of the app a while back & have used a couple different roms but it seems permanent.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I don't think switching out the part will be too difficult. I have the same exact problem and am planning on switching the port and ribbon sometime in the next couple weeks. I think I've read that the i9100 one works just fine.
Sent from my SGH-I777 using xda app-developers app
I think the problem is actually in the logic board and not just the connector. Even if you fix it the problem will likely reoccur in time. I don't want my phone repaired, even by AT$T, just to have it fail again, but out of warranty next time. I had to have my Captivate replaced 3 times. Maybe it's time to go back to HTC. It sucks, because I love this phone.
Miami_Son said:
I think the problem is actually in the logic board and not just the connector. Even if you fix it the problem will likely reoccur in time. I don't want my phone repaired, even by AT$T, just to have it fail again, but out of warranty next time. I had to have my Captivate replaced 3 times. Maybe it's time to go back to HTC. It sucks, because I love this phone.
Click to expand...
Click to collapse
Mine started happening after I spilt water on the end of the charging cable and didn't let it dry off completely before plugging it in. Do you still think it would be in the logic board? Then again, it seems like more and more people are getting this problem. And of course, it's just as the warranty is expiring on these phones.
Sent from my SGH-I777 using xda app-developers app
Lekerstein said:
Mine started happening after I spilt water on the end of the charging cable and didn't let it dry off completely before plugging it in. Do you still think it would be in the logic board? Then again, it seems like more and more people are getting this problem. And of course, it's just as the warranty is expiring on these phones.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
I may have splashed water too, I'm not sure cause I didn't check at the time. I was working at the bar playing music. It seemed to be just a drop on the screen. What's the logic board? Could maybe flashing a new rom fix it?
Sent from my SGH-I777 using xda premium
If it's a physical problem with hardware, no software changes can fix it.
Clay
Team Pirate
Sent from my PINK GSwagger2
Mine had nothing to do with water. I just think the micro USB connector is a poor design for something that has to be plugged and unplugged as often as a smartphone does and in the kind of environment we use them, especially in the car. The logic board is what the connector mounts to. It takes the signals from the connector and relays that information to determine whether the connection is for charging, PC connection or some other I/O function. Over time the process of disconnecting/connecting will weaken the solder joints and/or cause the thin traces in the ribbon cable to possibly short against each other and create the issues we are seeing. That's why the problems can be seen even after the cable is unplugged. Replacing just the connector will likely not solve the problem.
Talked to support. They are sending me another SII (refurbished). They wanted me to do a factory reset and download an update as part of their troubleshooting. I insisted that no software update would fix a hardware problem. *****ed enough to get them to drop it and send me another phone. My phone is rooted stock 2.3.4. Do you lose root with a reset? If I send it in rooted will that cause me trouble with the warranty dept. even though it isn't relevant to what is wrong with the phone?
Miami_Son said:
Talked to support. They are sending me another SII (refurbished). They wanted me to do a factory reset and download an update as part of their troubleshooting. I insisted that no software update would fix a hardware problem. *****ed enough to get them to drop it and send me another phone. My phone is rooted stock 2.3.4. Do you lose root with a reset? If I send it in rooted will that cause me trouble with the warranty dept. even though it isn't relevant to what is wrong with the phone?
Click to expand...
Click to collapse
Nick says they don't check. I dunno. All I know is if they can prove you messed with the phone and voided your warranty you'll get a bill for 400$

[Q] How do i fix this?

My i9300 all of a sudden stops charging.
I disassembled it and the next day decided to plug it in again. It charged up until 48%, when i plugged it out for use again.
Now, one day later it again won't charge... weird?
I'm trying to buy a usb port connector and want to replace it as i think the problem lies there, but how do i do this?
All the youtube video's are only replacing the simple stuff.
I have tried using another battery + batterycharger, this is not the problem. The phone still doesn't charge. I really suspect there is oxidation inside the USB connector.
Hope there's anybody who can help with replacing it.
should be the cable problem? many cases on this!
If you don't know any better about hardware, why don't you just buy an additional battery and battery charger... through could be little bit inconvenient
Sent from my GT-I9300 using xda premium
qtwrk said:
If you don't know any better about hardware, why don't you just buy an additional battery and battery charger... through could be little bit inconvenient
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I have tried using another battery + batterycharger, this is not the problem. the phone still doesn't charge.
Galaxy S3 bug
May be this is a bug of galaxy s3
even i have a galaxy s3 with jelly bean installed in it from factory, i connected it with my laptop and it was working normally but after 2-3 days i noticed that my device was unable to connect via usb so i flashed it and factory resetted my divice and bam ! it was back to normal, may be you can give it a shot
sdey.dey said:
May be this is a bug of galaxy s3
even i have a galaxy s3 with jelly bean installed in it from factory, i connected it with my laptop and it was working normally but after 2-3 days i noticed that my device was unable to connect via usb so i flashed it and factory resetted my divice and bam ! it was back to normal, may be you can give it a shot
Click to expand...
Click to collapse
Thanks but this isn't the case with me. I really suspect there is oxidation inside the USB connector. So could anyone help with how to replace this? I live in the Netherlands.
You said you dissembled it, you have enough knowledge about it?
I don't have much myself too but I tried my hands on my older devices in many cases, so I can only suggest you that the charging point which is a usb port would be connected to your pcb which needs to be disconnected with the help of an soldering iron and then you can replace it with a new one. However do it only if you have subsequent knowledge.
Also before trying anything try more chargers, I came to know that none of the generic and few original ones couldn't charge mine too. Check for their voltage.
Sent from my GT-I9300 using Tapatalk 2
what about a service centre ?
LentoViolentoMan said:
Thanks but this isn't the case with me. I really suspect there is oxidation inside the USB connector. So could anyone help with how to replace this? I live in the Netherlands.
Click to expand...
Click to collapse
You should visit a samsung service centre, they may cahnge it for free if your device is under warrenty
All the best
sdey.dey said:
You should visit a samsung service centre, they may cahnge it for free if your device is under warrenty
All the best
Click to expand...
Click to collapse
alright, thanks for the reply. But my device is flashed around 1000 times and it looks like i opened beercans with it. So this would not create a healthy warranty argument i guess. This is why i'm trying to do it myself.
Now all of a sudden it charges again, when i left it at the charger... so definately no charger problem. maybe oxidation/waterdamage from raindrops?
Triangle away
LentoViolentoMan said:
Now all of a sudden it charges again, when i left it at the charger... so definately no charger problem. maybe oxidation/waterdamage from raindrops?
Click to expand...
Click to collapse
You have already flashed your device 1000's of time, soo i'd recommend you to flash it back to stock and try triangle away application
It did work for me
Soo .. if you manage too get system status back too normal, you can easily claim your warrenty
Put it in a bag of rice for a day so any water kind of damage is gone.
Sent from my GT-I9300 using Tapatalk 2
sdey.dey said:
You should visit a samsung service centre, they may cahnge it for free if your device is under warrenty
All the best
Click to expand...
Click to collapse
No warranty user disassembled .
jje
it randomly starts charging and stops charging now. same with connecting to pc, sometimes it does and sometimes it doesn't connect...
no cable issue.
If you are afraid about any water or moisturizer fault, put it in a bag of rice for a day.
Sent from my GT-I9300 using Tapatalk 2
nicesoni_ash said:
If you are afraid about any water or moisturizer fault, put it in a bag of rice for a day.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
also when you think the water has already dried up?
Yeah, sometimes water dried up and formed in iron too but I can't be sure that could be your problem.
Sent from my GT-I9300 using Tapatalk 2
nicesoni_ash said:
Yeah, sometimes water dried up and formed in iron too but I can't be sure that could be your problem.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
yeah oxidation, but rice doesnt take away oxidation on iron right?
LentoViolentoMan said:
yeah oxidation, but rice doesnt take away oxidation on iron right?
Click to expand...
Click to collapse
Yeah right, it could handle moisturizer but once it's oxidative, rice cannot help.
Sent from my GT-I9300 using Tapatalk 2

Categories

Resources