[Q] Stuck on bootscreen - Galaxy S II Q&A, Help & Troubleshooting

Hey,
First off i hope i have put this on the right sub forum.
I've been stupid (I Think) I've olso looked around on the forum and the [READ THIS] Got a Boot Loop? Don't post a New Thread!
topic.
I'm using my SGS2 for a year now and was using the ressurexionRimix rom for a while.
I've been plaing around with my phone so i got lots of folder that were not used etc, so I wanted to get it back to factory settings, here is when all went down.
Via Settings-Backup and recovery i gave my phone a factory reset (while using the latest ressurexionremix rom, i think this is the misstake i made) When my phone went into the reboot is got stuck on the splash screen, it kept reapeeting the boot animation.
The second mistake i mad was not puting back my back-up but thought well i want it back to it's first state so i'll use ODIN to flash the stock ROM onto it. now, 4 hours later and about 10 trys with diferent versions of the stock roms i'm still stuck on the boot screen.
I've also tryd flashing a cwm so i could get in cwm recovery, this also without any luck
Does anyone have a idea what to do!?

go back to recovery - mounts andstorage and format the following :
cache, system, data, sdcards if you have it in recovery. reboot
you have a bkank screen as your phone has been wiped. reboot into download mode.
Connect odin and flash a stock rom. reboot and your phone should work provided that you have not damaged the flash chip on the motherboard.

Is this in CWM? the problem is i dont have that anymore because i've flashed it toc stok. I now get in the Android system recovery
The option i get there ar:
Reboot system now
apply update from external storage
Wype data/factory reset
Wipe cache parition
apply update from cash
test redbend fola[FS]
Will try this, thank..will let you know if it worked

Wiped data/factory reset and cache after this i ebooted my phone and i got the message installing application, now i'm in the setup menu. Looks like it is working.
Did'nt realice there was a recovery besides CWM Thank yoy so much Cosmic Blue!!! You saved my life!!

Related

[Q] Please help newbie with semi-bricked phone

Hi guys, I got a SGS2 just over a week ago, on Bell/Virgin network in Canada. Suffered from the battery drain issue due to being stuck with crappy UGKG2 firmware which my provider still hasn't updated.
I decided to update it myself, and did a ton of research. I successfully got Root tonight by flashing CF-Root-SGS2_ZS-OZS_KG2-v4.1-CWM4 kernel with Odin. In case it matters, I did NOT flash back my stock Kernel, so I still had the insecure kernel installed. From there, I backed up my apps with Titanium.
Went into CWM and selected boot into CWM Recovery. I followed the steps on the wiki, including creating a backup file. My only hint of what I might have done wrong was I originally selected to flash update.zip, and that process failed. I then went to the directory in which cyanogenmod is stored on my SD card, and selected that, then it installed ok. I had downloaded update-cm-7.10-GalaxyS2-signed and that's what I put on the phone. I then also installed the Google Apps.
I then hit reboot, and it only goes to the Samsung screen with the yellow triangle and just hangs there for a few minutes. Not knowing what else to do, I popped the battery out. I have since learned that I can turn it on and off, but it never goes past that screen. Wouldn't go into the recovery or download modes, always that screen. Luckily, I saw somewhere to do the 3 button thing WHILE in that screen, and that works. So I can get to recover, and download modes. So, I think I'm ok. I checked, and it does connect to Odin still.
I just want to know EXACTLY what I should do at this point. I don't want to fully brick it. There are actually two recovery files on the phone... not sure why... Or which one to pick. Should I just flash stock firmware back with Odin? One of my main goals is to get off 2.3.3 so I can have more than 8 hours of battery...
Thanks,
Rob
Boot into tecovery, do a full wipe again. (Wipe data/factory reset, wipe cache partition, advanced>wipe dalvik cache).
Now install CM7 zip twice in a row without reboot. It may take a few minutes for reboot since system is rebuilding dalvik cache. Be patient. After you see the home screen, reboot again.
Sometimes, CM won't install properly with CF root recovery. In that case reboot into download mode, flash codeworkx cwm kernel via ODIN.
http://forum.xda-developers.com/showthread.php?t=1118693
Now reboot into recovery and do full wipe and twice-install !
Ok, working now with the flash twice thing. Well that's weird, would be great if it was in the wiki page...
Thanks!
Rob

[Q] Can't remove installed software and can't use odin

Ok so I'm fairly new to the rooting scene, and these forums, but so far everything has been pretty good, except for one small problem. I installed a custom boot logo, and afterwards my phone was lagging a bit. I contacted the boot logo programmer, with no response, so I decided to wipe my system and use the backup from right before I installed the custom boot logo. Unfortunately, the boot logo has not changed, and my phone 'fails' whenever I try to flash something from Odin. Anyone know what to do in this situation.
If you want to do a full wipe of you device,cos it sounds like tha boot logo is corrupt,then boot to recovery and wipe cache partition and dalvik cache.then go to "storage and mounts" and format system,data and cache.Select "Go Back" and factory reset your phone and reboot.If it doesnt go past the boot logo after 1min then pull the battery,put it back in and turn it back on.Its a pain in the arse but it will completely clean up your device and if you where rooted you will need to probably reroot but berfore hand plug in your phone to your PC so it gets recognized again.
EDIT:Just incase,first of all download titanium backup from the market and backup your apps!!!!
Sting Rray said:
Ok so I'm fairly new to the rooting scene, and these forums, but so far everything has been pretty good, except for one small problem. I installed a custom boot logo, and afterwards my phone was lagging a bit. I contacted the boot logo programmer, with no response, so I decided to wipe my system and use the backup from right before I installed the custom boot logo. Unfortunately, the boot logo has not changed, and my phone 'fails' whenever I try to flash something from Odin. Anyone know what to do in this situation.
Click to expand...
Click to collapse
You need to wipe usb storage, sd card, then put phone in download mode, flash stock ROM using Odin. You need to fully wipe everything.
Sent from my Sexynos SGH-i777 using XDA Premium.
I've trying reflashing the stock ROM and kernel; however, it gives me a FAIL and says can't open the serial (COM) port.
I have solved the problem by closing Samsung Kies and wiping the system, thanks for all the help offered.

Stuck on boot animation loop

Attempting to install a new ROM, so wiped all data, did a restore to factory settings and wiped Dalvik Cache. Realised new ROM wasn't on memory card, so tried to boot up, and it just keeps showing the (stock) boot animation.
Can access recovery (CWM 5.0.2.6), so what is the best way to get my phone back up and running?
flash new rom using cwm.
or, if u could enter to download mode. flash stock using odin
Thanks, managed to get a ROM and installed it, and is working!
try to read Q&A thread for future reference.
helps alot. really.. no.. seriously..

[Q] Help handset bricked trying to install custom ROM

Hi I have attempted to install experience rom on my xperia U. Firstly i successfully unlocked the boot loader. I then rooted it and installed CWM recovery all still good. I the transferred the ROM image to the phone went into recovery did a wipe data factory reset and wipe cash partition. Also wipe dalvick cache. Selected the ROM and install started, it hung, only way out was battery pull, I went back into recovery same thing happened, finally tried once more and it hung at about 75%. Now phone goes in a loop sony logo to black screen and I cant get into recovery mode. I have searched to see if I can find a way out but not found a way around it yet. I would be very grateful for any help with this.
xs1m0nx said:
Hi I have attempted to install experience rom on my xperia U. Firstly i successfully unlocked the boot loader. I then rooted it and installed CWM recovery all still good. I the transferred the ROM image to the phone went into recovery did a wipe data factory reset and wipe cash partition. Also wipe dalvick cache. Selected the ROM and install started, it hung, only way out was battery pull, I went back into recovery same thing happened, finally tried once more and it hung at about 75%. Now phone goes in a loop sony logo to black screen and I cant get into recovery mode. I have searched to see if I can find a way out but not found a way around it yet. I would be very grateful for any help with this.
Click to expand...
Click to collapse
flash stock ICS Rom ftf with flashtool
Thanks for help
Thanks I managed to flash stock Gingerbread in the end.
In case anyone else has a similar problem here is a handy guide I found. (youtube.com/watch?v=hPPWRXcsz7g)
Where it says connect phone I found you need to connect it in fast boot (hold volume up button as you connect it) when the software is ready to flash un-plug phone then connect in flash mode (hold volume down button as you connect).
xs1m0nx said:
Hi I have attempted to install experience rom on my xperia U. Firstly i successfully unlocked the boot loader. I then rooted it and installed CWM recovery all still good. I the transferred the ROM image to the phone went into recovery did a wipe data factory reset and wipe cash partition. Also wipe dalvick cache. Selected the ROM and install started, it hung, only way out was battery pull, I went back into recovery same thing happened, finally tried once more and it hung at about 75%. Now phone goes in a loop sony logo to black screen and I cant get into recovery mode. I have searched to see if I can find a way out but not found a way around it yet. I would be very grateful for any help with this.
Click to expand...
Click to collapse
Flash stock firmware.
Install fastboot drivers.
Flash SlidingXU in cmd
Try out Zperience or TheBrainsRom following factory data reset, wiping cache and dalvik cache.

Bricked Samung Tab E Verizon

Hi all,
Sigh. So it looks like I bricked my Samsung Tab E Verizon. I rooted it with King root and when I removed it, it is now in a endless boot loop. I've tried all sorts of things to try and recover it.
I used SkipSoft to set it up to be flashed but odin fails everytime. I was using the new ROMS found on this Forum. I've tried putting it into download mode and manually flash it and that didn't work. I can't Re-Root it as it won't stay on long enough to Root and they always fail. Right now I'm at a loss.
Can anyone help?
Thanks.
Do you have custom recovery or default? if you have default you can hold the home button and vol up button then the power button to get into recovery, once your done with that you can wipe cache and reboot, if that STILL does not work then factory reset your phone and re wipe cache, i know losing data sucks but its better then a brick. (this will work 99% of the time because the default recovery automatically re-installs stock rom)
If you have a custom recovery, then i recommend wiping everything including dalvik cache etc, making sure EVERYTHING is squeakly clean (execpt recovery obviously) , and find the driver for your samsung phone and download it on your computer and install, once you are done with that, put your phone into download mode, find your original STOCK rom for your phone, download it and flash it with odin, from there IF successfull you should have a fresh boot of your stock rom, then you can re-root and go on with your day.
Also make sure once you re-gain root access backup your rom so you will always have a plan b if everything goes bad. i cannot recommend this enough, even if you are an expert with flashing, there is always that small percentage things will go wrong and you should always have that backup ready.
Hi!
Thank you very much for the reply. You know, that was one of the things i tried initially when it happened. When I tried it, it wouldn't go into recovery mode. I then went on the odyssey of hell in trying to recover it.
When I read your post I was thinking; "Yeah I tried that", but then I thought I would give it another shot. I went into Factory Reset, it then actually went into the recovery menu. I deleted the cache and set it to data/factory reset and it's still looping. I get an error saying; "E:failed to mount /preload (no such directory)". I then tried to run update from external storage and it's telling me that it's disabled. I tried to update from ADB and it's disabled. I tried to apply from cache and it says; "APPLY_CACHE is depreciated". It's still looping.
Urghhhhhhhhh.......

Categories

Resources