Just curious if there is an app or something similar that would show how many amps are being provided when charging through a wall charger/USB powered hub? The reason I ask is that I'm thinking of buying a powered USB 3.0 Hub. The adapter that came with our phone says it's 2 Amp, so I am assuming our phone can pull 2 amps for charging. Just wanted to verify in some way that a 2 Amp dedicated port would really work for this phone.
*Madmoose* said:
Just curious if there is an app or something similar that would show how many amps are being provided when charging through a wall charger/USB powered hub? The reason I ask is that I'm thinking of buying a powered USB 3.0 Hub. The adapter that came with our phone says it's 2 Amp, so I am assuming our phone can pull 2 amps for charging. Just wanted to verify in some way that a 2 Amp dedicated port would really work for this phone.
Click to expand...
Click to collapse
When I get home, I'll download the kernel source and see if I can find out how much power it draws during charging. I doubt however, that it will draw 2A during charging as most chargers are rated to supply more power than the phone will accept.
Yeah, 2A seems like that could melt a battery charging that fast. Someone sent me a private message and told me to try CurrentWidget. I threw that on the phone and it registers as 1A while charging. But it appears like the widget doesn't break it down with decimals. For instance it could be charging with 1.8A and wouldn't know it. I put it in a standard USB port and it reported as charging with 0 Amps but the battery was indeed charging.
I took a quick look at the N7100 (International Note 2) source posted on Github by CM and it looks like AC charger is 650mA, USB is 450mA. It's a little hard to tell what exactly it's using for charging, so I'll try to verify that when I get home and have a chance to take a better look.
*Madmoose* said:
Yeah, 2A seems like that could melt a battery charging that fast. Someone sent me a private message and told me to try CurrentWidget. I threw that on the phone and it registers as 1A while charging. But it appears like the widget doesn't break it down with decimals. For instance it could be charging with 1.8A and wouldn't know it. I put it in a standard USB port and it reported as charging with 0 Amps but the battery was indeed charging.
Click to expand...
Click to collapse
A 3100mAh Lithium Ion battery can easily handle a full 2A charge rate. The ideal charge profile for Lithium Ion is a CC/CV profile, starts at constant current between like 3V and 4V, which most LI batters can take a rate of 1C, meaning it can handle a charge rate of 3.1A, recommended charge rate to achieve the most possible charge/discharge cycles is usually 0.2C so for a 3100mAh battery that would be 620mA. Once the charge gets to the correct voltage it gets to constant voltage and charges until termination current usually in the 100mA range. So yes, it can handle a 2A charge no problem.
Hey there. I very much appreciate that breakdown. Makes me wonder why they dropped the amps so much during charge.
bose301s said:
recommended charge rate to achieve the most possible charge/discharge cycles is usually 0.2C so for a 3100mAh battery that would be 620mA.
Click to expand...
Click to collapse
If this is true (first time I've seen this anywhere), that would line up great with the 650mA max charge rate I found. Also, I downloaded the VZW source, and it doesn't look to significantly different from the N7100 source, at least as far as the charger stuff is concerned, so I would say they both probably have a max charge rate of 650mA.
I appreciate the info and time you both put into this. I guess it means a 2A usb port will be slight overkill. Even changing the charge rate to a higher value seems to indicate a lower battery life. Makes you wonder how apple did it's math for the ipads charge rate. The battery must be huge to accommodate a 1.1A charge rate. Or they are sacrificing battery life for fast charging.
Wont the kernel dictate the charge rate no matter what the charger is rated at?
If the kernel is set for a charge rate of 650mA (0.650A), then why does the Note 2 have a more powerful 2A wall charger, while the GS3 has a 1A wall charger.
FAUguy said:
If the kernel is set for a charge rate of 650mA (0.650A), then why does the Note 2 have a more powerful 2A wall charger, while the GS3 has a 1A wall charger.
Click to expand...
Click to collapse
The original nook color 7" came with a 2A wall charger and that was 2 years ago... both my note 2 and nook color charge about the same rate (quick to 99% and slow to 100). The charger is probably cheaper to make at 2A rather than anything and plus it could be used to charge future devices. Also if you used a 1A charger to charge the note it might possibly get warm/hot from running at near full capacity.
Im using my OLD blackberry 700mA wall charger to charge the phone at night while im sleeping. No problems with heat.
Related
Alright, so I have a mini USB car charger that is rated at 2.0A (got with GPS) and I just want to make sure the extra amperage is not going to charge my battery too quickly and then kill it in the process. All I have to go on is that my wall charger is capable of only 1.0A and the computer USB is on the level of mA. Does anybody have a car charger or know the maximum amperage possible that these phones can take?
Thanks in advance.
Its to Strong ! I have Crash a PDA with 1.5A
I've used a 2.0a charger but noticed that the battery didn't charge right.
On that note, also noticed that a .5a or 500mA charger after about 6 months killed my battery. (burned out and won't take a full charge anymore)
Recommendation is to stick to 1.0A charging as much as possible as the Wizard's charge circuit is designed at 1.0A charging and monitoring.
DOESN'T MATTER ..if u know the basic Ohms Law..its the max capacity of the charger.(or any source) the current regulating circuits will take care of the real charging current fed to the battery
I charge my phone on my computers USB connection all the time, all computers have a maximum of 500mA USB current.
Amps are pulled from the charger, not pushed to the phone.
Voltages are pushed to the phone, not pulled from the charger.
If the phone draws too much current from the charger, the voltage drops to a point where the maximum power (P (Watt) = U (Voltage) * I (Amps)) of the charger isn't exceeded.
According to the USB specification you need at least 200mA with 500mA recommended +5VDC.
More is never a problem, you could even use a 50A power supply without breaking your phone. Practically spoken: I wouldn't do that.
huh?
I have messed up a few devices before by putting the wrong charger on the device (2.0 amp charger on a droid eris and 1amp charger on the MOTOACTV) Is this a problem with the device's charging circuit? In general it should only pull up what it needs to charge but my devices were messed up?
I returned the first MOTOACTV after it wouldn't leave the boot screen and the second one I got acted funny on 1 amps as well. It charged fine on .75amp charger that came with the device but when I put it on my HTC Dinc charger it shot up from 10% to 20 to 30 etc. all within minutes. Hope I didn't mess this one up too.
Just trying to figure out what the deal is. My phone for sure charges faster when connected to 1amp vs .5amp (computer). This makes sense I understand because the device is able to handle 1amp, but I wonder if it would mess up with a 2amp charger.
Thanks!
The last two posts of 2008 are correct. Your phone is capable of drawing more than 500 mA but less than 1000 mA. If the charger is 1A, 1.5A, 2A, or 50A, it won't make a difference to the phone's charging time or life.
Wrong voltage can be bad, but phones are designed to support USB charging, as a minimum, and 1A to 2A is always safe. As was said in 2008, the charger pushes voltage to the battery, but the battery pulls current from the charger.
That's a really good way of describing it
Pushing and pulling current and voltage is a really good way of describing it.. Given that I am theoretically well within the charging parameters, how comes my phone (Galaxy mini/pop) becomes unusable when its charging (touch screen doesnt touch and screen jumps to new screen without touching?) Am I wrecking my phone?
No, your charger is to blame. Maybe it isn't properly grounded. Phones with capacitive touch screens (not the Wizard! but maybe your phone) can get really weird on some chargers. I have a Nexus One with an aftermarket charger that always makes the touch screen go haywire. When I use an HTC charger, the phone has no problem. As far as I know, the damage isn't permanent, it's just that the sensors get confused. When I disconnect from the charger, turn the phone off, then turn it on, all is well.
My wizards were never bothered by chargers, no matter what kind, as long as they were mini-USB, they were the right voltage. The wizard doesn't take as much current as more modern phones, either.
Hmm. Not properly grounded sounds very plausible. Viva mediterranean circuits. Thanks
Usb chargers will be rated at 5v, which is exactly the correct voltage to charge your device. What you want to make sure is you buy the correct "rated" amperage. Not because it will damage your phone. Amperage only exists as a sum of the power used by the device. You want to find a decent 1amp (1000mA) or higher if you wish, rated usb charger. The the mains charger for your phone is only rated at 1amp, so a 1amp charger is adequate. Avoid 500ma chargers as it will take twice as long to charge and gps / satnav applications will drain the battery even when charging at that rate.
Also if you have a new pc, most of the decent boards will specify 1amp charge even when off if it has on/off charge stated on manufacture details.
Newer phones will charge fine with higher amperage
The myth that charging your device at a faster rate will reduce the life of your device’s battery is false!
If you want quicker charging, look for a wall or car charger that delivers 2100 mA of current at 5 volts higher won't matter.... These lithium ion batteries can handle it... It was just back then if you were to try to put a faster charger in an older battery it (in any cases) just won't charge.
i'm reading different opinions about this when i searched through the xda forums and on google.
i'm using the same custom rom and kernel for about a week now. a few days ago, i charged purely on wall socket. left overnight, my battery lost only 2%.
last night, i charged my phone when it was about 30%. i charged using usb up to 85%, then i finished it off on AC up to a 100%. my overnight loss went up to 5% (i did not install any additional apk, or change my setcpu profiles, etc).
there are no topics on this, specifically for SGS2. mostly are from HTC threads.
from what i learned, usb's only pour out about half of what AC's can give (500 mah vs 1,000 mah). does that translate into a poorer batt life?
How you charge your phone, usb vs AC will not effect the battery life, 100% is 100%, it will just charge slower via usb.
Sent from my GT-I9100 using xda premium
I have noticed something similar with my captivate.I would guess that when you use the wall charger with 1amp the battery gets more of a charge than when you use a usb charger at .5amps. 1amp can cause more chemical change in the battery than half an amp.
sent from my Infuse at Tranquility Base.
SGS2 will only let 650mA into the battery, AFAIK it's hardware restricted to do this. Wall charger will charge faster, but only slightly.
I see no difference and 2% to 5% is within a tolerable variation of overnight drain .
Its all the same electricity .
jje
Sticks02 said:
SGS2 will only let 650mA into the battery, AFAIK it's hardware restricted to do this. Wall charger will charge faster, but only slightly.
Click to expand...
Click to collapse
Firmware, actually, and the phone determines how much it will draw based on the resistance between the two USB data pins. If the resistance is < 200 ohms, it assumes it's plugged into an AC charger, and will draw up to 650 mA. Otherwise, it assumes it's plugged into a PC's USB 2.0 port, and will draw up to 450 mA, just under the 500 mA that a USB 2.0 port is supposed to provide, per the USB 2.0 spec.
Since it's firmware, it should be possible to change the current draw by re-compiling the kernel sources with new values. Note that you don't want to go too high on the charging current, as that could cause overheating or fire.
Sticks02 said:
SGS2 will only let 650mA into the battery, AFAIK it's hardware restricted to do this. Wall charger will charge faster, but only slightly.
Click to expand...
Click to collapse
And how about charging a spare battery using a separate battery charger?
I have two batteries and I never charge them plugging the phone, just using a spare battery charger. Does it have any negative effect on the batteries' lifespan?
dont know what happened but my phone is being charged with ac adapter as same speed as usb.(more than 4 hours) :S
I have a USB charger capable of delivering 1A.
Even with the data pins shorted (phone side), it still seems to draw only 350 mA :-(
Any ideas?
Known made-up cables that do work?
Hey guys
I was wondering , since it takes this phone over 3 hours to fully charge... If I buy a Nokia charger with an output of 1.2 mah ,would it take a shorter time for this phone to charge? Its own charger has 0.7 mah output..
No. SGS2 has a capped charge rate of 650 as far as I know.
----------------------
GTI9100 KK5
yes but it might get hot. i used to charge with playbook's charger all was well. but now i use the samsung S2 charger. but i never checked if it was charging faster
Ok, thank you both
atifsh said:
yes but it might get hot. i used to charge with playbook's charger all was well. but now i use the samsung S2 charger. but i never checked if it was charging faster
Click to expand...
Click to collapse
Charging is controlled by the phone only and varies depending on whether it detects a USB data link or not. And the battery temperature.
So, provided the charger is rated at 700mA or greater, the phone will charge at the fastest rate it sets. On USB, the charge rate is lower. USB 2 ports have a maximum of 500mA output... and if the phone is on, the charge rate is often lowered further.
I use an iPAD2 charger for convenience, which is rated at 2A. The phone charges fine, but only at the same rate as the stock Samsung charger.
LenAsh said:
Charging is controlled by the phone only and varies depending on whether it detects a USB data link or not. And the battery temperature.
So, provided the charger is rated at 700mA or greater, the phone will charge at the fastest rate it sets. On USB, the charge rate is lower. USB 2 ports have a maximum of 500mA output... and if the phone is on, the charge rate is often lowered further.
I use an iPAD2 charger for convenience, which is rated at 2A. The phone charges fine, but only at the same rate as the stock Samsung charger.
Click to expand...
Click to collapse
thanks for the info dont know about S2 but i know few brands allow that. blackberry is one of them, using playbook charger on their phones charge them faster but battery gets hot.
I cant find the exact post to link it for you but I'm sure the devs had a discussion about it in the siyah dev thread.
Mains capped at 600 by the device.
http://forum.xda-developers.com/showthread.php?t=1263838&page=1406
----------------------
GTI9100 KK5
Well, I needed more actual facts than technical stuff. So the idea is not to buy the nokia charger cause the sgs2 wont charge faater. This sucks. HTC evo 3d battery charges to full in abou 1,5 hours and it lasts enough so...I really dont understand samsung
In my ROM there is an option to enable fast charging. If you enable that, a charger with a higher mAh will make sense.
Probably the heat issue is the main reason for not implementing a higher charge rate. Battery degradation world be another.
Sent from my GT-I9100 using xda premium
I don't think you should use a bigger charger with a higher voltage to charge your phone, the battery for your SGS2 might not be able to handle the amount of voltage from the charger
MacBreQ said:
In my ROM there is an option to enable fast charging. If you enable that, a charger with a higher mAh will make sense.
Click to expand...
Click to collapse
Thanks but I prefer stock roms
I dont know whats getting worst.
But whats the best replacement charger for xtz that has a higher amps? I already looked in amazon and most of it has a 2a dual and i still want to ask the community
And guys if possible please suggest those has a long data cable
---
I cant wait for the next update on XTZ, something like .67
Displa, camera, battery and some tweak, not sure.
Sent from my SGP311 using xda app-developers app
arcsuser said:
I dont know whats getting worst.
But whats the best replacement charger for xtz that has a higher amps? I already looked in amazon and most of it has a 2a dual and i still want to ask the community
And guys if possible please suggest those has a long data cable
Sent from my SGP311 using xda app-developers app
Click to expand...
Click to collapse
I'm not saying it's the best, but I've been using an old iPad charger (2.1A) for the last 2 months without any problems. I plug the charger into a mains extension lead so I don't need a very long USB lead.
Well i have an iphone5 charger here it says output 5v---1a
Is it ok to charge thendevice with it?
Sent from my SGP311 using xda app-developers app
arcsuser said:
Well i have an iphone5 charger here it says output 5v---1a
Is it ok to charge thendevice with it?
Click to expand...
Click to collapse
Any USB wall wart that is 1.5 amps - 2.1 amps (1500 - 2100 mA) @5 volts will work. The more amps the faster it will charge. In a pinch you could use a 1000 mA charger, it will just take longer.
Alright im confused.. Which is faster mA or A?
And by the way im not asking about the power here but a replacement.
Thanks for the infos though
Sent from my SGP311 using xda app-developers app
1000 Milliamps = 1 Amp
1500 mA = 1.5 A
2100 mA = 2.1 A
Pop Quiz: 5A is how many mA? _____
5000mA is how many A? _____
Often wall warts list output in milliamps
Some external batteries list output in Amps.
It's not hard to convert between the two.
dph3055 said:
1000 Milliamps = 1 Amp
1500 mA = 1.5 A
2100 mA = 2.1 A
Pop Quiz: 5A is how many mA? _____
5000mA is how many A? _____
Often wall warts list output in milliamps
Some external batteries list output in Amps.
It's not hard to convert between the two.
Click to expand...
Click to collapse
I get it..
5000mA
5A
Sent from my SGP311 using xda app-developers app
arcsuser said:
I get it..
5000mA
5A
Sent from my SGP311 using xda app-developers app
Click to expand...
Click to collapse
Congrats, you passed electricity 101.
Keep in mind that batteries can be fickle creatures. Sony delivers the XTZ with a 1500 mA charger. Based on that alone, it's probably best to replace the original charger with another 1500 mA charger. While you can certainly use more than 1500 mA and it will certainly charge faster, in the long run you may end up shortening the battery life. There are only so many charge cycles to be had in any given battery and quick charging can put an extra strain on a battery that wasn't manufactured to suck up power that quickly.
In a pinch, use whatever you have on hand or can find. For everyday charging, its best to default to what the manufacturer recommends.
The Apple 12W one works perfectly fine and charges the tablet so much faster!
There is people here saying it is impossible because of battery electronics.
It's quite simple: They're plain wrong.
Jequan said:
The Apple 12W one works perfectly fine and charges the tablet so much faster!
There is people here saying it is impossible because of battery electronics.
It's quite simple: They're plain wrong.
Click to expand...
Click to collapse
Without doubt the best charger I've used for the money. It keeps up with battery drain on heavy use (Full HD video+Net+ others...at the same time) Stock charger does not. At first glance it does seem expensive but does the job very well.
I sent Sony a link to the Apple website for these as it's much better than the POS charger they give you with their £400 "Flagship" tablet. Well worth the £15 price tag.
Jequan said:
The Apple 12W one works perfectly fine and charges the tablet so much faster!
There is people here saying it is impossible because of battery electronics.
It's quite simple: They're plain wrong.
Click to expand...
Click to collapse
Well, yes and no. Watts, Amps and Volts are all different measurements for different things and it can be quite confusing to figure out to the uninitiated. Watts is a mathematical calculation based on Ohm's Law. Watts = Volts x Amps
All USB devices accept a maximum of 5 volts. USB standards cap the max power delivered to a device @ 5 volts. Most standard USB ports deliver 5 volts @1 amp. Newer computers and specially designed charging ports can and do deliver more than 1 A via USB but they all deliver a maximum of 5 volts.
12 watts divided by 5 volts = 2.4A
If you look at your charger you'll see the output amps listed as 2.1A or 2100 mA.
Sony's included charger only delivers 1.5A or 1500mA, so yes it charges slower and when the tablet is under high load, has a hard time keeping the battery at 100%.
The real concern here, is what effect does delivering 2.1A of current to the battery day after day have on the useful life expectancy of that battery? I don't know the answer because I don't know anything about the battery that Sony uses. It's possible, if Sony, used a top quality battery, that charging with 2.1A will have no effect at all and Sony just wanted to save a buck or two by including a weaker charger in the box. On the other hand, Sony may have deliberately used a battery designed to accept 1.5A and included an appropriate charger.
As I said in a post above, apart from the battery overheating while charging (if it wasn't designed to charge @ 2.1A) and a reduced useful life of the battery, there shouldn't be any real problem using a "slightly" more powerful charger - up to a point. Charge with too many amps and the battery will probably explode or at the very least melt, potentially causing a fire if left unattended.
When talking to Sony, the question you need to ask, "Is the battery rated for 2.1A or only 1.5A?"
dph3055 said:
Well, yes and no. Watts, Amps and Volts are all different measurements for different things and it can be quite confusing to figure out to the uninitiated. Watts is a mathematical calculation based on Ohm's Law. Watts = Volts x Amps
All USB devices accept a maximum of 5 volts. USB standards cap the max power delivered to a device @ 5 volts. Most standard USB ports deliver 5 volts @1 amp. Newer computers and specially designed charging ports can and do deliver more than 1 A via USB but they all deliver a maximum of 5 volts.
12 watts divided by 5 volts = 2.4A
If you look at your charger you'll see the output amps listed as 2.1A or 2100 mA.
Sony's included charger only delivers 1.5A or 1500mA, so yes it charges slower and when the tablet is under high load, has a hard time keeping the battery at 100%.
The real concern here, is what effect does delivering 2.1A of current to the battery day after day have on the useful life expectancy of that battery? I don't know the answer because I don't know anything about the battery that Sony uses. It's possible, if Sony, used a top quality battery, that charging with 2.1A will have no effect at all and Sony just wanted to save a buck or two by including a weaker charger in the box. On the other hand, Sony may have deliberately used a battery designed to accept 1.5A and included an appropriate charger.
As I said in a post above, apart from the battery overheating while charging (if it wasn't designed to charge @ 2.1A) and a reduced useful life of the battery, there shouldn't be any real problem using a "slightly" more powerful charger - up to a point. Charge with too many amps and the battery will probably explode or at the very least melt, potentially causing a fire if left unattended.
When talking to Sony, the question you need to ask, "Is the battery rated for 2.1A or only 1.5A?"
Click to expand...
Click to collapse
That i can agree with and it's a risk i am willing to take. There is people who say the 2.1A charger wont affect charging time in a positive way at all. That's what what i refered to when i said it's not true.
Jequan said:
That i can agree with and it's a risk i am willing to take. There is people who say the 2.1A charger wont affect charging time in a positive way at all. That's what what i refered to when i said it's not true.
Click to expand...
Click to collapse
Definitely. More current (which is what Amps measure) means faster charge times, as long as what is being charged can accept the current being provided. You should be fine, but what do I know. PM me in six months and let me know if your battery still last a reasonable amount of time - then we'll know.
dph3055 said:
Well, yes and no. Watts, Amps and Volts are all different measurements for different things and it can be quite confusing to figure out to the uninitiated. Watts is a mathematical calculation based on Ohm's Law. Watts = Volts x Amps
All USB devices accept a maximum of 5 volts. USB standards cap the max power delivered to a device @ 5 volts. Most standard USB ports deliver 5 volts @1 amp. Newer computers and specially designed charging ports can and do deliver more than 1 A via USB but they all deliver a maximum of 5 volts.
12 watts divided by 5 volts = 2.4A
If you look at your charger you'll see the output amps listed as 2.1A or 2100 mA.
Sony's included charger only delivers 1.5A or 1500mA, so yes it charges slower and when the tablet is under high load, has a hard time keeping the battery at 100%.
The real concern here, is what effect does delivering 2.1A of current to the battery day after day have on the useful life expectancy of that battery? I don't know the answer because I don't know anything about the battery that Sony uses. It's possible, if Sony, used a top quality battery, that charging with 2.1A will have no effect at all and Sony just wanted to save a buck or two by including a weaker charger in the box. On the other hand, Sony may have deliberately used a battery designed to accept 1.5A and included an appropriate charger.
As I said in a post above, apart from the battery overheating while charging (if it wasn't designed to charge @ 2.1A) and a reduced useful life of the battery, there shouldn't be any real problem using a "slightly" more powerful charger - up to a point. Charge with too many amps and the battery will probably explode or at the very least melt, potentially causing a fire if left unattended.
When talking to Sony, the question you need to ask, "Is the battery rated for 2.1A or only 1.5A?"
Click to expand...
Click to collapse
You're kinda right, but kinda not....
The charging circuitry inside the tablet is what regulates the charging current, not the 'charger', it will have min and max currents (the thing we plug into the wall that we all call a charger, is really just a power supply, there's no charging circuitry inside it.) That's why it doesn't charge from a standard usb port (which is 500mA) so, if it's charging faster with a 2.1A power supply, then it's obviously designed to do so.
Let's say, for example, the tab can accept a charging current of between 700mA-2.5A. Obviously, the charge time will be slower at 700mA than 2.5A, however, if you were to plug in a 5A power supply, the charging circuitry in the tablet will still only draw the 2.5A its designed to. So, don't worry about giving it too much, it's not possible.
Now, I don't know what the min and max charge currents are, but I can tell you that mine will charge (very slowly) from a 700mA LG charger.
And also, the dock for the tablet states an input of 1800mA,
So, we can assume the min is at least 700mA and the max is at least 1800.
Sent from my C5303 using Tapatalk 4
technaudio,
That's my age showing. Back before some smart guy invented the wheel, we gave a device power and if we gave too much a fuse would blow. I didn't mean to imply that the charging circuit was contained in the wall plug but at the same time, I failed to appreciate that the Tab was designed to prevent an over current situation.
...now let's see what happens when I give this puppy 15A AC...damn, melted the usb cable...
@dph3055
I knew what you meant, but some others on here probably wouldn't.
I've seen a lot of threads saying using a 'too powerful' charger will damage the battery.
It just won't.
Sent from my C5303 using Tapatalk 4
Hi people
Since I'm part of the lucky people owning a Huawei Ascend Mate 7 (MT7-TL10), I'm actually looking some accessories like a quick charger.
I wish a charger better than the original one if possible, with EU pins, and with a good quality checked (I prefer to avoid some product with awesome specs but not tested ...)
So anyone have any idea where I can find a good charger, and without any risk for my phone ?
Thanks
WolwX said:
Hi people
Since I'm part of the lucky people owning a Huawei Ascend Mate 7 (MT7-TL10), I'm actually looking some accessories like a quick charger.
I wish a charger better than the original one if possible, with EU pins, and with a good quality checked (I prefer to avoid some product with awesome specs but not tested ...)
So anyone have any idea where I can find a good charger, and without any risk for my phone ?
Thanks
Click to expand...
Click to collapse
for few days i went to jarir book store on KSA . I found Charger good price also 2 USB 5 volt 2.4 Amber ... compatiable with mate 7 and faster from orignal ...
just to know more fasting to charge wil damge your batter of mate 7 quickly .also orignal 2 A will damge
for me I charging with Iphone charge 1A good for batter and Stander and low risk to Device
If you want proper charging, then always use the accessories coming with that product. It is tested for sure and good. Other than that, you can use any charger delivering the same charge. The original charger is 5 volt, 2 Ampere. Don't use anything above 2 amperes as it may damage the device. Below that will charge it slowly.
BTW, why you don't want to use the original charger?
Sent from my Coolpad 9976A using Tapatalk
I use Nexus 6 Turbo charge (made by Motorola) 5v 1.6A it charge full battery in 90 minute.
http://www.motorola.com/us/accessories/power-storage/chargers/motorola-turbo-charger/motorola-turbo-charger-pdp.html
Is it safe for battery life of Mate 7?
I'm using a NTT Docomo Quickcharge 2.0 adapter and It does support it even though is not specified and it's not a qualcomm chip.
Sent from my HUAWEI MT7-L09 using Tapatalk
djmaxi said:
I'm using a NTT Docomo Quickcharge 2.0 adapter and It does support it even though is not specified and it's not a qualcomm chip.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
Can you test it with ampere (free in gplay) i don't think it will charge over 1800mA so that it acts like a normal 2a charger
Fast charging
Using a fast charger will destroy your battery faster. Not recommended as the battery is not removable. You can get a battery and if you are comfortable removing the back and swapping it out then go for it.
Hi,
PoopDonkey said:
Using a fast charger will destroy your battery faster. Not recommended as the battery is not removable. You can get a battery and if you are comfortable removing the back and swapping it out then go for it.
Click to expand...
Click to collapse
that is not correct as you are not connecting the charger to the battery directly. In fact the charger is just a power supply. The actual charger is integrated into the phone (charging controller).
In general you need to know that volts are pushed to the device by the power supply and amps are drawn by the device (phone) from the power supply. Therefor using a power supply with more than 5V will kill your phone but using one with 2A, 3A or even 4A will make no difference as the charging controller will just pull the amps required. Because of that you can not really fast charge a phone by changing the power supply only if the phone supports the fast charge option (for example some Nexus phones).
I tested this myself with a power supply (can provide 5V and 1.5 to 4 amps) and an amp meter. The phone always drew between 1.5 and 1.6 amps (with and empty battery, 8 to 10% left) regardless of the selected amps of the power supply. Using a power supply with less than 1.5A will kill the power supply as the phone tries to draw the 1.5 amps or more. As result the power supply will get hot and eventually die.
Since battery is not removable be careful with fast charging, since it will decrease the life span of the battery and in the end it will just give you less battery performance.. it is stupid... however.. there is situations where it can be really needed though but not on a regular basis..
Last weekend I would really had needed fast charging.. It forced me to spend about 3 hours on a cafee so I could make it 100% so I did know I did survive the day with gps and all other things.. However in these situations I really like the ultra power saving mode..it saved me that night.. when I was lost in stockholm.. and my phone was really the only way to get contact with people
blackinfinity said:
Since battery is not removable be careful with fast charging, since it will decrease the life span of the battery and in the end it will just give you less battery performance.. it is stupid... however.. there is situations where it can be really needed though but not on a regular basis..
Last weekend I would really had needed fast charging.. It forced me to spend about 3 hours on a cafee so I could make it 100% so I did know I did survive the day with gps and all other things.. However in these situations I really like the ultra power saving mode..it saved me that night.. when I was lost in stockholm.. and my phone was really the only way to get contact with people
Click to expand...
Click to collapse
Why don't you buy a powerbank? I can advice you the xiaomi 16000mah. That one charges fast and you can be mobile.
Any recommendations?
I wonder if a S6 charger do the trick. Stock charger is too slow damn. Spending 3 hours to have a full charge is not acceptable for me.
I'm going to be honest, it doesn't really matter how you charge your phone as long as you don't go over 5v and 2 Amps. Batteries will automatically lose cells from charge cycles and by the time you feel the effects of the battery going bad, you would have already moved on to the next device for the next person to worry about. And saying to use the Stock Charger isn't really good enough as the Stock charger doesn't serve as a Car charger also. If you want to charge your phone quick, and you already have a 2 Amp charger, Check your microUSB cable. Don't use junk cables, buy quality or use the cable you received with the device. You get what you pay for. Fast Charging won't work as the Charger has a chip inside that communicates with the Phone and Device. Also, when buying a charger, don't just randomly buy a charger online, Make sure its UL Tested. Even if it says UL tested, there should be a test number on that UL Label, take it a step further and google it and make sure it matches the charger specs and passes as knockoff chargers are notorious for copying other chargers Regulatory icons to make it seem authentic. You don't want to buy a junk charger that ends up burning your house down or gives you a very bad 120 Volt shock through the microUSB cable that would also kill and fry your phone.
treem said:
I use Nexus 6 Turbo charge (made by Motorola) 5v 1.6A it charge full battery in 90 minute.
http://www.motorola.com/us/accessories/power-storage/chargers/motorola-turbo-charger/motorola-turbo-charger-pdp.html
Click to expand...
Click to collapse
1.6A is nothing.. i use 2.0A and it still chrges 3 hours
one friend conected his phone to a hi suite, he went to repair sistem or something like that, and it pop out an option of QUICK CHARGE... even he doesent know how that hapends, now his phone charges faster. he is on b331 rom
cyvr1 said:
Hi,
that is not correct as you are not connecting the charger to the battery directly. In fact the charger is just a power supply. The actual charger is integrated into the phone (charging controller).
In general you need to know that volts are pushed to the device by the power supply and amps are drawn by the device (phone) from the power supply. Therefor using a power supply with more than 5V will kill your phone but using one with 2A, 3A or even 4A will make no difference as the charging controller will just pull the amps required. Because of that you can not really fast charge a phone by changing the power supply only if the phone supports the fast charge option (for example some Nexus phones).
I tested this myself with a power supply (can provide 5V and 1.5 to 4 amps) and an amp meter. The phone always drew between 1.5 and 1.6 amps (with and empty battery, 8 to 10% left) regardless of the selected amps of the power supply. Using a power supply with less than 1.5A will kill the power supply as the phone tries to draw the 1.5 amps or more. As result the power supply will get hot and eventually die.
Click to expand...
Click to collapse
so much misinformation
this post is the only one who gets it right.
Kalemucu said:
Any recommendations?
I wonder if a S6 charger do the trick. Stock charger is too slow damn. Spending 3 hours to have a full charge is not acceptable for me.
Click to expand...
Click to collapse
You have not read my earlier post or you did not understand it. Changing the charger on the Mate 7 will have NO effect (zero, nada) on the time required to charge your phone except the charger delivers less then appr. 1.6A. Then it would take longer and evetually kill the charger. The Mate 7 uses a Kirin chip which has no fastcharge implemented. Samsung uses Qualcomm Chips with implemented fastcharge technology. The charger (in fact a power supply) and the phone/CPU/charge controller need to communicate with each other, otherwise fastcharge will not be activated (the reason fastcharge with charge-only cables does not work because they lack the required data cables for communication).
I'm going to be honest, it doesn't really matter how you charge your phone as long as you don't go over 5v and 2 Amps.
Click to expand...
Click to collapse
Wrong. Correct would be "I'm going to be honest, it doesn't really matter how you charge your phone as long as you don't go over 5v." The amps of the charger don't matter at all -> amps are PULLED by the phone not pushed to the phone. You could use a charger with 100 or 1000 amps and it would not hurt your phone a bit as long as it is only charged with 5 Volts.
More amps (>1.6A) on the charger do not improve the time for charging one second.
1.6A is nothing. i use 2.0A and it still chrges 3 hours.
Click to expand...
Click to collapse
Yes, and that won't change one bit even if you use the best and most expensive charger and a 1000$ cable. The Mate 7 is limited by its hardware (built in charge controller) and pulls max 1.6A. End of story.
As long as you don't understand how charging works you will spend 100's of bucks for cables and chargers to no avail.
The only reason, why charging with some charges is quicker than with others is that those chargers actually deliver the amps they are supposed to deliver. There are a lot of cheap/bad chargers out there which are labelled with 5V/2A but only deliver a fraction of the amps. You can identify those chargers easily because they get extremly hot. I use a 2A charger from Aukey which gets only lukeworm.