4.2 Keyboard and camera - HTC Desire X

Android 4.2 keyboard with gesture, its as good as swipe.
http://m.pocketnow.com/2012/10/30/android-4-2-stock-keyboard-now-available-for-download-unofficially
After installing go to languages and input and check Android Key board
Hope it will be useful.
Download and Install
Now, getting it on your device is going to be easy for some of you, and less easy for others. You'll need to be on Android 4.0+, to start.
If you're on a phone with a UI overlay that has the stock keyboard disabled (eg, Samsung TouchWiz, HTC Sense, Sony), you can just download the apk below- no root required. To install, make sure you have "install from unknown sources" enabled in your phone settings, and after installation, go into your phone's keyboard settings and enable "Android keyboard." Then, you can switch to the new keyboard. This may also work on some "stock" Android custom ROMs - but it will not work on stock Android builds distributed by Google.
Get the apk here: http://d-h.st/XuS
If the apk doesn't work, you're running a phone that is either A.) running stock Android (as in, AOSP), or B.) running software that has the stock Android keyboard as an option, you'll need to download this ZIP file, and flash it in recovery. That also means you're going to need root. as you'll be writing to /system/apps. Before you do, though, either back up the stock keyboard (if you don't know how, you probably shouldn't be doing this) or create a full image backup, just in case. Here's that ZIP file:
Get the zip here: http://d-h.st/36D
Source: http://www.androidpolice.com/2012/1...d-4-2-keyboard-with-gesture-typing-right-now/
Android 4.2 camera
available now with photo sphere simply move to system apps and set permissions to rw-r-r- and reboot.some reports of photo sphere force closing but had no problems here
http://www.mediafire.com/?927d7dm454g435o
Here's the working zip, flash feom cwm
http://forum.xda-developers.com/showthread.php?p=33551677
Press thanks if u liked
YO YO CYRIN

The keyboard is working, but the Mediafire Link is down :S
Sent from my HTC Desire X using xda app-developers app

I'm having problems with keyboard. Installation is working, I check the keyboard in settings and change to my language, but I can't swipe (I have turned on the trace option). I tried more languages and no trace in English, German etc... Any idea?
<---Slide(it)d from my Desire X --->

Gnaver said:
I'm having problems with keyboard. Installation is working, I check the keyboard in settings and change to my language, but I can't swipe (I have turned on the trace option). I tried more languages and no trace in English, German etc... Any idea?
<---Slide(it)d from my Desire X --->
Click to expand...
Click to collapse
+1 but I'm using a Desire C...
Sent from my ToasterOven running Toastdroid 4.2

SchleckBlood said:
The keyboard is working, but the Mediafire Link is down :S
Sent from my HTC Desire X using xda app-developers app
Click to expand...
Click to collapse
Here's the link..... Flash it through cwm recovery
http://www.2shared.com/file/yUbXupM0/camera42_patched.html
Sent from my MB526 using xda premium

Do I need CWM to flash this zip? My dad wants the camera.
Sent from my ToasterOven running Toastdroid 4.2

Stereo8 said:
Do I need CWM to flash this zip? My dad wants the camera.
Sent from my ToasterOven running Toastdroid 4.2
Click to expand...
Click to collapse
Yup I think so because the Desire X won't allow you to touch the /system partition using a File Explorer even with ROOT permissions

The Android Manual said:
Yup I think so because the Desire X won't allow you to touch the /system partition using a File Explorer even with ROOT permissions
Click to expand...
Click to collapse
What if I use fastboot boot cwm.img? Will it leave any trail of tampering except camera app in system/app and libs in system/lib?
PS: His phone is a Desire C, not X.

Stereo8 said:
What if I use fastboot boot cwm.img? Will it leave any trail of tampering except camera app in system/app and libs in system/lib?
PS: His phone is a Desire C, not X.
Click to expand...
Click to collapse
sorry I don't know how to play with a Desire C

I know, I know, just asking... It's the same thing...

Thks & br
Sent from my HTC Desire X using xda app-developers app

keyboard works perfect thanks (flashed in cwm)

does the camera specially photosphere works???????

leon
First, sorry for the question but im new here! and my eng is not very good.
Why to install camera.apk from here and what will change ? Better quality ? New effects ? I just dont get it!
Sorry for the stupid question!

Htc ime theme
Hello I am looking for this theme for a keyboard .... http://www.fonsymbian.net/img/uploads/20101025_89.png

camera download link invalid.... help..

meherzad said:
camera download link invalid.... help..
Click to expand...
Click to collapse
...try to download from: [URL="http://www.2shared.com/file/yUbXupM0/camera42_patched.html"]http://www.2shared.com/file/yUbXupM0/camera42_patched.html
[/URL]
Should be online and work!

Has someone a camera with the photosphere mode (not the Panorama) working? i can just make one picture...
Sent from my HTC Desire X using xda app-developers app

Thank a lot bro im downloading

Who ever put on HTC Desire X ? Bugs have?

Related

[How To] New Soft Keyboards + Updating Swype!

Please refer to my thread in the apps section about adding the default android keyboard, HTC Mod, and multi-touch keyboards from the Droid X and EVO 4G
http://forum.xda-developers.com/showthread.php?t=743618
Onto the main event. Updating Swype.
This worked for me running SlideMR4
http://forum.xda-developers.com/showthread.php?t=715180
1. Reboot into clockwork recovery and reconnect to the computer to gain ADB access.
2. Mount system/
3. Delete the file system/lib/libSwypeCore.co
4. Reboot
5. Install new Swype.
I was able to install these versions (google em')
1.56.30.7625.HVGA
1.58.33.7772.HVGA
1.60.36.8214.HVGA
Then enabled in settings and Swype-ing with no force closes!
Hellraz0r said:
http://forum.xda-developers.com/showthread.php?t=743862
Click to expand...
Click to collapse
That link takes me to a thread about some other stuff..
I'm trying to install 1.60.36.8214.HVGA via estrongs file manager and it's not working. Any ideas?
maybe.....
Humm... I wonder why?
Install using adb
USE FOLLOWING STRUCTURE:
adb install Swype_1.60.36.8214_HVGA.apk
BTW shoot me a link of where u found the files. EDIT: NVM found them.
elliotshoe said:
That link takes me to a thread about some other stuff..
Click to expand...
Click to collapse
Fixed that, my bad.
daewond3r said:
I'm trying to install 1.60.36.8214.HVGA via estrongs file manager and it's not working. Any ideas?
Click to expand...
Click to collapse
I believe when I was using SlideMeRoot5r1, I had the same problem trying to install new Swype's. You might try editing the data/system/packages.xml to remove any trace of the old one.
Hellraz0r said:
Please refer to my thread in the apps section about adding the default android keyboard, HTC Mod, and multi-touch keyboards from the Droid X and EVO 4G
http://forum.xda-developers.com/showthread.php?t=743618
Onto the main event. Updating Swype.
This worked for me running SlideMR4
http://forum.xda-developers.com/showthread.php?t=715180
1. Reboot into clockwork recovery and reconnect to the computer to gain ADB access.
2. Mount system/
3. Delete the file system/lib/libSwypeCore.co
4. Reboot
5. Install new Swype.
I was able to install these versions (google em')
1.56.30.7625.HVGA
1.58.33.7772.HVGA
1.60.36.8214.HVGA
Then enabled in settings and Swype-ing with no force closes!
Click to expand...
Click to collapse
ok so i got adb and iam in clock wrk wear do i go to deleat the old swype iam just a lil con fused
rok0187 said:
ok so i got adb and iam in clock wrk wear do i go to deleat the old swype iam just a lil con fused
Click to expand...
Click to collapse
Step 3:
adb shell
From shell: rm /system/lib/libSwypeCore.co
Finally got it working.
Man, these versions are fugly compared to the stock Espresso one. Guess we'll have to wait for the official Slide froyo update for that.
daewond3r said:
Finally got it working.
Man, these versions are fugly compared to the stock Espresso one. Guess we'll have to wait for the official Slide froyo update for that.
Click to expand...
Click to collapse
Which version specifically? Can you link me?
Thanks
Sent from my myTouch 3G Slide using XDA App
Finally got it working.
Man, these versions are fugly compared to the stock Espresso one. Guess we'll have to wait for the official Slide froyo update for that.
Click to expand...
Click to collapse
Yeah, they are pretty bad. I'm using 1.60 and the color scheme is nice. I might look into theme-ing the new one to look like to stock version.
Sent from my myTouch 3G Slide using the XDA mobile application powered by Tapatalk
I installed Swype just fine with Astro.
What I really miss from the stock ROM is Dragon Dictation. I drive all the time and it was a good was to cheat death while sending messages. The Google voice recognition software is not nearly as good, for me.
Everyone not liking the look of the updated Swype's please give this a shot!
Swype.1.29.18-1.5909.HVGA.Slide.Portable
http://www.mediafire.com/download.php?84y5j0b3p7dnx7t
HTC-IME
I like this one http://www.mediafire.com/?4vbfbgea4mfcz3p
What do you guys recommend is the best/most stable updated version of swype to use with the teamfenix froyo?

[NewKeyboard] Android 2.3 Gingerbread Keyboard for WILDFIRE android 2.2

Hey guys I found a new thread of a new keyboard to our wildfire! ;D It's from Gingerbread(android 2.3), it is really nice and i decided to share to all that dont know it.
Tutorial:
Requirements
-Device must have root priveleges with Superuser
-Android 2.2 Froyo operating system
-The latest “Voice Search” application from the Android Market
-Make a backup of LatinIME.apk in system/app folder just in case!
Clock work mod and rom manager is needed but we are using wildfire and all of us use it so i wont put in requirements.
Bugs:
Vibrate on keypress doesn’t work(nice, don't eat my battery )
How to install:
Download the keyboard from here:
http://briefmobile.com/Fabolous_GBKB_Fix.zip (do not extract the files just copy the zip file how you download it)
Now connect your cellphone to computer and send the .zip file to your sdcard
Disconnect from computer, turn off phone or reboot into recovery(clock work mod) then install zip from sd card>choose zip and fla****/installIt!
Reboot phone and done! Go to messages and create a new message and you will see a new keyboard from Gingerbread(android 2.3)!
Tested and working with cyanogenmod 6.1.0 rc2.
Preview:
Which languages are available?
Pls can you check??
demolition23 said:
Which languages are available?
Pls can you check??
Click to expand...
Click to collapse
I installed it, there's every languages that are already on your phone, at least French and English are supported, the rest is in the list, didn't try.
nunosilva10 said:
Bugs:
Vibrate on keypress doesn’t work(nice, don't eat my battery )
Click to expand...
Click to collapse
I beg to differ, Vibrate on Keypress works 100% fine. I'm using OpenFire 2.3 ROM.
Anyways, this keyboard has some nice new settings. Me likey. Thanks a lot.
PS: Why is ROM Manager needed? I don't have it and it works fine.
demolition23 said:
Which languages are available?
Pls can you check??
Click to expand...
Click to collapse
It have all languages working, no problem with that.
I have installed it and i still have the same keyboard. Do I need to change it in config?
Sent from my HTC Wildfire using XDA App
Gaussiano said:
I have installed it and i still have the same keyboard. Do I need to change it in config?
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
If you did all right the keyboard sould appears without you change any configuration, repeat all the steps and have shure that you have all the requirements!
Gaussiano said:
I have installed it and i still have the same keyboard. Do I need to change it in config?
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
All you do is go to language and keyboard from settings, and select Android Keyboard, open up an sms app, hold text field until you see Input Method, select Android Keyboard.
Thnx man! Working here!!!
Sent from my HTC Wildfire using XDA App
Can't get the german dictionary to work
Doesnt contain Greek lang at all
kevin2516 said:
All you do is go to language and keyboard from settings, and select Android Keyboard, open up an sms app, hold text field until you see Input Method, select Android Keyboard.
Click to expand...
Click to collapse
I could choose ginger keyboard by holding text field as you said but when I try to write, it got closed by force and doesn't let me to write. I have wildpuzzle rom with froyo and I installed it steps by steps.
Don't worry, I will try it with the final ginger rom. Thank you all
Sent from my HTC Wildfire using XDA App
The Japanese?????
It have Japanese?????????
Can someone tell what is the difference between the old Keyboard? I don't see anything. Only the Button-Spacing is some different, but all other is like the old Keyboard?!
works fine but I have to hold and swipe on the emoticons for more, unlike the previous 2.2
Once i installed this,is it possible to go back to my previous keyboard,, Btw am using CM Nightly Build
mac4rfree said:
Once i installed this,is it possible to go back to my previous keyboard,, Btw am using CM Nightly Build
Click to expand...
Click to collapse
Yes you can, install a new nightlly and that should disapear. In mine disapear so if you want it back install it again.
yuanvn said:
It have Japanese?????????
Click to expand...
Click to collapse
No, dont have japanese.
thanks mate,, so i shud do wipe and install???
No, no need to wipe, download a new nightly and install it like you did with the keyboard, (install zip from sd card>choose zip), nightly are updates no need to wipe just download it and install it withoutwipe unless you want to "format" your cellphone.

Animated Flip Clock from Desire HD [YOUTUBE]

Sorry for my English. This is my first post
I found a stable modified version from Dinc skyraider rom.
no FC and you can move/delete/add it again.. good. but it is still too big. so I resize it to fit qvga screen. (decompile and edit xml)
I tested on my phone only. working well on safe stock 2.34.75.1
it has a bunch of problems, but I don't know how to fix it
anyway, flipping animation is working great.
flash it in recovery.
if you want to get back to the original wildfire clock widgets, flash wfclock.zip
I haven't try it, but what kind of problem did u encounter after flashing the desire hd clock?
Do you need to root your WildFire?
Alistairfire said:
Do you need to root your WildFire?
Click to expand...
Click to collapse
Yes you do. You can't flash a package in Recovery if you are not.
This works just the imgaes are a little bit big and also the animation are not clear they come up as blocks not twin drops but works five if u go into weather and refresh
Sent from my HTC Wildfire using XDA App
anakhanjing said:
I haven't try it, but what kind of problem did u encounter after flashing the desire hd clock?
Click to expand...
Click to collapse
at least these problems..
1) full screen weather animation isn't working.
2) another 11 clock widgets(except filpclock) are not properly resized.
3) in flipclock, weather condition and temp info text are gone..
4) when add clock widgets, city selection menu has unimportant graphical error.
sorry for my English
Can't install. It says after a while of thinking(installing): "application not installed"
Sent from my HTC Desire using XDA App
Amphor said:
Can't install. It says after a while of thinking(installing): "application not installed"
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
flash zip in recovery mode.. or replace apk using adb access.
Why don't you embed it like this ?
argeoff said:
Why don't you embed it like this ?
Click to expand...
Click to collapse
thank you I want to but I don't know how to do it
I can see it now. edit first post..
Its missing the animation when we keep full screen on ...please evilsto or any other mod may kindly look for the missing graphics
love the clock otherwise
Thanks
Hi, I downloaded the files of the first post on my wildfire, 2.2.1, but the procedure did not work.
I did the flash recovery mode of hdclock_wf.zip, with the clock widget on the display, but to restart instead the clock is a gray square, which can not be deleted, even if the screen is unloked, in fact the other widgets behave normally. If I flash back to wfclock.zip, everything returns to normal, with no animation.
Can you help me?
Can some one check the widget I modded in the following post.
http://forum.xda-developers.com/showpost.php?p=20393953&postcount=479
Sent from my HTC Tattoo using XDA App
EDIT: sorry this wont work on froyo
rallapag said:
Can some one check the widget I modded in the following post.
http://forum.xda-developers.com/showpost.php?p=20393953&postcount=479
Sent from my HTC Tattoo using XDA App
EDIT: sorry this wont work on froyo
Click to expand...
Click to collapse
Ah, then maybe I understand, I have to install a rom based on Gingerbread and Sense, as post n. 1 of tread
The Complete Wildfire Index (Root/S-OFF Guides/ROMs...)
Android 2.3 Gingerbread Roms - C) Sense Based:
# 2011-10-25 - No Limits™ Beta 2 (Sense 3.5 on Gingerbread 2.3.5) by arco68/Solar_ /Various Members
# 2011-10-19 - SenseOnFire v0.4b (Sense 2.1 on Gingerbread 2.3.3) by VigiDroid
# 2011-06-08 - SFM 1.1 based on Salsa (Sense 2.1 on Gingerbread 2.3.3) by evilisto
I understand you correctly?

[APP] HTC Sense 3.0 Camera APK for HTC Glacier (with PANORAMA)

Always do a NAN Backup before changing system files:
You have to be running a Rom with Sense framework like HTC Sense or MySense (seams not to work on pure sense versions)
As in the tread title attached is HTC Sense 3.0 Instant Capture Camera WITH PANORAMA.
Installation:
Root Explorer
Move .apk to /system/app/
replace original
change permissions to rw- r-- r--
RESTART the phone an ENJOY
OR
Recovery
Download Zip file (Thanks to JGW310 for the tweaks on the Zip): http://forum.xda-developers.com/showthread.php?t=1087353
Restart in recovery
install update from zip
select Update-Camera-signed.zip from your save directory
RESTART the phone an ENJOY
TESTED:
On Sense Roms 2.0+
Special Instructions to avoid FC:
- HDR has to be selected thru effects selection or it will FC (SCREEN SHOT 3)
- Burst function doesn't work.
-1080 Recording Possibly dual-core required. (on some phones it will just record in 720 even toe you select 1080)
- Don't change Widesceen to normal setting, if you did then go to system settings/applications and find camera and clear data, it will fix the permanent FC it caused. (Thanks eliasadrian)
FC
Sent from my HTC Vision using XDA App
pnut22r said:
FC
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
At what stage? when you start the camera or in app? you could be more detail then "FC"
Fc when choosing hdr lol
Rom: Evil's Virtuous 1.05
Kernel: Faux htc gb .04
Nvm read op sorry
Rom: Evil's Virtuous 1.05
Kernel: Faux htc gb .04
doesn't work on MIUI
haldi15 said:
doesn't work on MIUI
Click to expand...
Click to collapse
HTC Sense based roms only
Amazing.
Sent from my HTC Glacier using XDA App
Is this working on Royal Panache 2.3.3 pure sense?
JoelZ9614 said:
Is this working on Royal Panache 2.3.3 pure sense?
Click to expand...
Click to collapse
Did you read the OP?ALL SENSE BASED ROM.
DOPE! Just took a panoramic pic of the office. cool method of picture taking. you have to be slow with it though.
this is very cool...i tried the full hd option and it worked flawlessly with no fc or anything...idk if its actually 1080p but it looks good haha
wont install on fusion rom for me ?...says cant install.
kirkcody said:
wont install on fusion rom for me ?...says cant install.
Click to expand...
Click to collapse
save your old HTCCamera.apk by renaming it to HTCCamera.apk.bak
Use root explorer and paste the new HTCCamera.apk into /system/app/
Give it the same permissions.
You can't 1-click install this app because it writes to the /system directory.
kirkcody said:
wont install on fusion rom for me ?...says cant install.
Click to expand...
Click to collapse
Fusion Rom should already have this Camera since its a port of sense 3.0
Neither via root explorer nor flashing it is working for me. It fc's everytime I try openning the camera app. I'm running royal panache rom.
JoelZ9614 said:
Fusion Rom should already have this Camera since its a port of sense 3.0
Click to expand...
Click to collapse
Fusion ROM at this time contains camera from Sense 2.1
works perfectly on fusion just do the root explorer method and wow finally a camera that takes pics right lol
Sent from my MyTouch 4G with HTC Sense 3.0 using XDA App
royal ginger is AOSP right? so then this wont work on it huh? too bad...
I cant get this to work either, running Fusion and using root ex.
I keep getting an error saying cannot install after i put it in /system/app
When i tried to put the old camera in the folder i got the same error message

Camera 4.2.2 android jelly bean patched

HI guys !!
Here I give those who want to enjoy the camera and gallery 4.2.2 jb
can enjoy all of its features without having to change anything.
just have to have recovery, either cwm or safetrap to flash and is all running at the rest of the photosphere ...
(does not eliminate the stock camera and gallery, that I will have to do on your own if you want)
greetings!
Niiiiiiice man! Big thanks. Working on XT925 pt-br
Sent from my XT925 using Tapatalk 4 Beta
photosphere worked for me. i edit this two lines on build.prop
Ro.product.model to "Galaxy Nexus"
Ro.product. brand to "Google"
Works on nexus 7
Sent from my Nexus 7 using XDA Premium HD app
elcolo_ said:
photosphere worked for me. i edit this two lines on build.prop
Ro.product.model to "Galaxy Nexus"
Ro.product. brand to "Google"
Click to expand...
Click to collapse
I got it to work by just installing the S4GE apk pull, no edits needed
Can u link apk pull?
Sent from my XT890 using xda app-developers app
how to install safestrap?
elcolo_ said:
photosphere worked for me. i edit this two lines on build.prop
Ro.product.model to "Galaxy Nexus"
Ro.product. brand to "Google"
Click to expand...
Click to collapse
photosphere only works if you edit lines on build.prop?
Vlw...
This is the apk file, it worked like a champ for me.
http://www.mediafire.com/download/k3i4qza1cm4pcnv/Googleeditioncamera.apk
memphis060 said:
This is the apk file, it worked like a champ for me.
http://www.mediafire.com/download/k3i4qza1cm4pcnv/Googleeditioncamera.apk
Click to expand...
Click to collapse
Thanks for the apk! Works great!
Is there an option to save pictures on the external sdcard instead of internal?
this camera have hdr option?
LagannBTT said:
this camera have hdr option?
Click to expand...
Click to collapse
No
Sent from my XT925 using Tapatalk 4 Beta
crisbro said:
HI guys !!
Here I give those who want to enjoy the camera and gallery 4.2.2 jb
can enjoy all of its features without having to change anything.
just have to have recovery, either cwm or safetrap to flash and is all running at the rest of the photosphere ...
(does not eliminate the stock camera and gallery, that I will have to do on your own if you want)
greetings!
Click to expand...
Click to collapse
Good work
but can you make an update for it ?
Help please
After applying this to my Razr HD Maxx, I am no longer able to drag app icons to my homescreen. Keep getting the error "No more room on the homescreen" when I clearly have room to drag an apk icon from my app drawer.
How can i fix this? Still happening even after uninstalling the Camera apk. Only started happening immediately after installing this.
Thanks
Seems to work fine, nothing got edited, photsphere is working atm, but dont know if it will stop working, as the last time i tried 4.2 camera
Thank you
camera
crisbro said:
HI guys !!
Here I give those who want to enjoy the camera and gallery 4.2.2 jb
can enjoy all of its features without having to change anything.
just have to have recovery, either cwm or safetrap to flash and is all running at the rest of the photosphere ...
(does not eliminate the stock camera and gallery, that I will have to do on your own if you want)
greetings!
Click to expand...
Click to collapse
Do you simple go to cwm and install this zip like you would the rom or gapps?
What's the installation instructions please
I dl'd this zip file I'm thinking boot into recovery and select install zip from sdcard?
how to install
HI Dear Developer
Will it work for Spice Mi 530
MT6577
& How
I Rooted My Mobile by TWRP Recovery
i cant found camera app in all app manager ? after i install a new rom

Categories

Resources