[Q] Where's the 4.1.2 update? - Galaxy S III Q&A, Help & Troubleshooting

Hi All,
I have an unlocked UK non-rooted phone that I recently restored to stock firmware (DLJ4).
I understand that the UK BTU is out and so are people receiveing this update through Kies/OTA yet or is it only on sammobile? I'd rather update OTA than through odin but I havent't received the update yet - it still comes up with the latest updates are installed.
Any ideas?
Cheers

why dont you want to update through odin? Takes literally 3 mins

Never updated by Kies before in my 6 months using this phone lol. You might wanna connect to Kies and check. Sometimes the OTA doesn't push through

If your phone codes match the firmware on the server you get it .
If you no longer have matching codes due to flashing stuff and then trying to revert to the Samsung route basically you are wasting your time .
jje

xcly said:
Never updated by Kies before in my 6 months using this phone lol. You might wanna connect to Kies and check. Sometimes the OTA doesn't push through
Click to expand...
Click to collapse
Since I had the s1 I've never updated through kies always odin
Sent from my GT-I9300 using xda app-developers app

Well I didn't want to have to set my phone up again. Unless there's an ota file itself I could just flash? So that my data is kept
Sent from my GT-I9300 using Tapatalk 2

WTVTom said:
Well I didn't want to have to set my phone up again. Unless there's an ota file itself I could just flash? So that my data is kept
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
youre on a stock samsung rom? Just flash the new stock samsung rom over it in odin, wont lose anything

Yeh I am. Oh I thought whenever you did a flash through Odin it factory resets it?
But still - I don't get why I can't update ota.

WTVTom said:
Yeh I am. Oh I thought whenever you did a flash through Odin it factory resets it?
But still - I don't get why I can't update ota.
Click to expand...
Click to collapse
Nope - only when you unlock the boot loader. So if you've done that already, you're fine.
I'm on dlj4 too - I can't see a 4.1.2 update that corresponds to this - can I use another? I'm unlocked and rooted.

gingerneil said:
Nope - only when you unlock the boot loader. So if you've done that already, you're fine.
I'm on dlj4 too - I can't see a 4.1.2 update that corresponds to this - can I use another? I'm unlocked and rooted.
Click to expand...
Click to collapse
[RESOLVED]
I had to update the CSC to BTU using CSC select from the play store. Common problem when flashing BTU firmware with Odin apparently - defaults to Kor which prevents OTA from appearing.

Related

ICS update on S2 without network

Hi Guys,
I recently updated my GS2 to ICS via Odin as my network( Vodafone Ireland) had not released it yet. Now I have a constant notification to register for software updates. Anytime ive tried doing so it fails. I had ignored it think that it will fix itself once my network releases the upgrade.
However, ive just found out that Vodafone Ireland launched ICS a few days ago. Any idea what steps i need to take?
Sent from my GT-I9100 using XDA
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=1#regiona
Instructions For Flashing ICS:
Extract the firmware
Open the included Odin
Put your device in Recovery MODE (Home + Volume up + Power)
Wipe Data/Factory reset
Wipe Cache
Take Out Your battery & put it back in
Put your device into Download MODE (Home + Volume Down + Power)
Click PDA and select *.tar.md5
Then finally click START!
Maybe i wasnt clear. Ive already installed the update, i am currently running ICS but i dont seem to be able to register my update?
Sent from my GT-I9100 using XDA
BazmanFoo said:
Maybe i wasnt clear. Ive already installed the update, i am currently running ICS but i dont seem to be able to register my update?
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
If you want your ota update, get back to official GB of your carrier and region, that it will ota fine.
Sent from my GT-I9100 using Tapatalk 2
Excuse my ignorance, GB?
how to download remix rom
please let me know how can i download any rom. i want to use ics remix
BazmanFoo said:
Excuse my ignorance, GB?
Click to expand...
Click to collapse
Gingerbread (just before ICS that is)
rakesh.andarpa said:
please let me know how can i download any rom. i want to use ics remix
Click to expand...
Click to collapse
I guess you mean this:
http://forum.xda-developers.com/showthread.php?t=1436854
Follow his instructions to the letter
ok there are 2 things going on........
1: either you mean the icons that show up after you flash ics stock rom
2: or you want to update officially by your carrier / OTA update.
if its option 1 just click the samsung thing and than skip it will go away, other icon you have to signin and it will check for ota update and say u have latest blaa blaa.
needless to say u need tobe online for both
Hi,
Again I'm not sure if people understand so I'm obviously not being clear. I have an unrooted SGS2 which I updated to ICS before my carrier launched it offically. I now have a constant notification to register my device update but whenever I try, I get the error "Software Update. Processing failed".
I have attached a scrnshot of the notification.
Any help is appreciated.
Bump
Sent from my GT-I9100 using XDA
BazmanFoo said:
Hi,
Again I'm not sure if people understand so I'm obviously not being clear. I have an unrooted SGS2 which I updated to ICS before my carrier launched it offically. I now have a constant notification to register my device update but whenever I try, I get the error "Software Update. Processing failed".
I have attached a scrnshot of the notification.
Any help is appreciated.
Click to expand...
Click to collapse
That's for OTA software updates. Now that you've already flashed via Odin (and probably not a firmware that matches your actual CSC) this probably won't work anymore, which is why it fails to process.
You can safely ignore it, or if you want to get rid of it, you can root and freeze the Software Update application with Titanium Backup. (there are probably other ways to get rid of it as well)
ctomgee said:
That's for OTA software updates. Now that you've already flashed via Odin (and probably not a firmware that matches your actual CSC) this probably won't work anymore, which is why it fails to process.
You can safely ignore it, or if you want to get rid of it, you can root and freeze the Software Update application with Titanium Backup. (there are probably other ways to get rid of it as well)
Click to expand...
Click to collapse
Thanks. My worry now is that I wont get future updates, minor fixes etc. Is this the case? Also, Im sick of this constant notification! Anyway to reverse the update so that I can get the proper one?
BazmanFoo said:
Thanks. My worry now is that I wont get future updates, minor fixes etc. Is this the case?
Click to expand...
Click to collapse
... Didn't I answer this in my last post?
BazmanFoo said:
Also, Im sick of this constant notification! Anyway to reverse the update so that I can get the proper one?
Click to expand...
Click to collapse
Use CheckFUS to figure out what the actual firmware is for your region, download that, and flash via Odin.

your device does not support upgrading via kies! !!!

I bought a used galaxy note and tried upgrading to ics but i keep getting this msg : your device does not support upgrading via kies.
The it ask me to confirm firmware version which i have using *#1234#. My phone shows correct version.
Android version 2.3.6, kernel 2.6.35.11 build gingerbread.ucla1.
Could someone pls help? my husband also bought a used note and his updated just fine. I don't.believe this phone is rooted.
Any advice would much appreciated. Thanks!
My advice is search the thread
Not trying to be rude but this issue is know and there is different ways of upgrading to ICS with out kies
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
jayRokk said:
My advice is search the thread
Not trying to be rude but this issue is know and there is different ways of upgrading to ICS with out kies
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Totally understand. Guess Im scared of bricking my phone lol.
miketilly2 said:
Totally understand. Guess Im scared of bricking my phone lol.
Click to expand...
Click to collapse
Just make sure you read tons before flashing
It should be pretty simple after you have an idea of what's going on.
Read the stickies they will help
And flashing the Official ICS thru Odin/Kies shouldnt brick or harm your phone at all
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
miketilly2 said:
I bought a used galaxy note and tried upgrading to ics but i keep getting this msg : your device does not support upgrading via kies.
The it ask me to confirm firmware version which i have using *#1234#. My phone shows correct version.
Android version 2.3.6, kernel 2.6.35.11 build gingerbread.ucla1.
Could someone pls help? my husband also bought a used note and his updated just fine. I don't.believe this phone is rooted.
Any advice would much appreciated. Thanks!
Click to expand...
Click to collapse
It does not matter if your phone is rooted or not. Start up Samsung Kies. Connect your phone. Go to the Tools tab. Select "Firmware upgrade and Initialization". Fill in the info and you should force the update. Model is SGHI717. No hyphen. And use caps for model and SN.
Agoattamer said:
It does not matter if your phone is rooted or not. Start up Samsung Kies. Connect your phone. Go to the Tools tab. Select "Firmware upgrade and Initialization". Fill in the info and you should force the update. Model is SGHI717. No hyphen. And use caps for model and SN.
Click to expand...
Click to collapse
I tried that and it said SGH -I717 does not support initializing. Now what?
It say my current firmware is PD:LA1 / PHONE:LE2 / CSC :LA1 (ATT )
Maybe update not availble yet for that??
miketilly2 said:
I tried that and it said SGH -I717 does not support initializing. Now what?
It say my current firmware is PD:LA1 / PHONE:LE2 / CSC :LA1 (ATT )
Maybe update not availble yet for that??
Click to expand...
Click to collapse
Update thru Odin
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
jayRokk said:
Update thru Odin
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I will. I am curious though as to why kies is saying that. Oh and thanks.
Ill get my husband to do it, he's good at stuff like that. Plus if he messes up i can take his note as compensation
miketilly2 said:
I tried that and it said SGH -I717 does not support initializing. Now what?
It say my current firmware is PD:LA1 / PHONE:LE2 / CSC :LA1 (ATT )
Maybe update not availble yet for that??
Click to expand...
Click to collapse
Its not that hard just a couple files you have to download and you'll be set..
Google Odin for ATT Note and
Download this .zip file found here
http://www.hotfile.com/dl/162779447/3bb6230/I717UCLF6_I717ATTLF6_ATT.zip.html
(its stock official ICS ) extract the .zip and put the .tar file inside in the PDA slot
And hit start
Make sure you put your phone in download mode first
(Holding volume down and power when powering up)
You should be set
I think there is a video on the stickies on how to do it as well if you get lost or confused
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
miketilly2 said:
I tried that and it said SGH -I717 does not support initializing. Now what?
It say my current firmware is PD:LA1 / PHONE:LE2 / CSC :LA1 (ATT )
Maybe update not availble yet for that??
Click to expand...
Click to collapse
Some mentioned there was an ATT software update by OTA on some phones. Maybe this was an update for kies compatability on older Note handsets. Have you looked there first? Sorry if I could not help more.
jayRokk said:
Its not that hard just a couple files you have to download and you'll be set..
Google Odin for ATT Note and
Download this .zip file found here
http://www.hotfile.com/dl/162779447/3bb6230/I717UCLF6_I717ATTLF6_ATT.zip.html
(its stock official ICS ) extract the .zip and put the .tar file inside in the PDA slot
And hit start
Make sure you put your phone in download mode first
(Holding volume down and power when powering up)
You should be set
I think there is a video on the stickies on how to do it as well if you get lost or confused
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Does this PDA include Modem too? Just out of curiosity.
miketilly2 said:
I will. I am curious though as to why kies is saying that. Oh and thanks.
Ill get my husband to do it, he's good at stuff like that. Plus if he messes up i can take his note as compensation
Click to expand...
Click to collapse
As JayRokk suggested... Make sure your device is in download mode. If not, that would account for the error message.
Agoattamer said:
Does this PDA include Modem too? Just out of curiosity.
Click to expand...
Click to collapse
It should
But there is always a flashable .zip if it doesn't
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
zancro said:
As JayRokk suggested... Make sure your device is in download mode. If not, that would account for the error message.
Click to expand...
Click to collapse
My husband said that it is in download mode. I'm just gonna update via odin. I give up on lies.
But if I ever do figure it out I'll post for others. I appreciate everyone's advice and input.
miketilly2 said:
My husband said that it is in download mode. I'm just gonna update via odin. I give up on lies.
But if I ever do figure it out I'll post for others. I appreciate everyone's advice and input.
Click to expand...
Click to collapse
No problem. Report back and let us know how it went
Agoattamer said:
It does not matter if your phone is rooted or not. Start up Samsung Kies. Connect your phone. Go to the Tools tab. Select "Firmware upgrade and Initialization". Fill in the info and you should force the update. Model is SGHI717. No hyphen. And use caps for model and SN.
Click to expand...
Click to collapse
Model is sierra golf hotel india seven one seven. All caps and no spaces. Kies probably didn't recognize the model.
FYI I guess there are different model numbers, or at least different ways the model number must be entered. My model # is SGH-I717...and when updating this way via Kies, I had to enter the dash. It wouldn't take it without the dash. Also, I've seen others report the model # they used was ATTI717.
I know old thread
miketilly2 said:
I tried that and it said SGH -I717 does not support initializing. Now what?
It say my current firmware is PD:LA1 / PHONE:LE2 / CSC :LA1 (ATT )
Maybe update not availble yet for that??
Click to expand...
Click to collapse
and that you might have fixed it already but...
The quickest fix for me was to install ATT's original Baseband back its official I717UCLA1. Your note might have a different/custom one installed. I ran into the same exact issue today on my girlfriends Note (forgot I had a tmobile radio loaded for her). I would assume that CWM is loaded on the device also. If thats the case, search XDA for ATTNOTEUCLARADIO.zip (approx 22.1mb file) and copy to sd or internal storage on device. Boot into recovery via vol up + vol down + power. choose install via .zip. point to file and run. once completed, reboot.
now connect note to computer and run Kies. It will now tell you update is available.
Hope this helps anyone else who stumbles across this post via google search. I had to re-download files as we weren't home when I had did this where I have the files backup to to storage drive. Its safe and fast.
(Update) This will remove root access, remove CWM recovery and install ATT's bloatware crap. The cool factor: It DOES keep all your data and apps untouched except Superuser, which it removes
miketilly2 said:
I bought a used galaxy note and tried upgrading to ics but i keep getting this msg : your device does not support upgrading via kies.
The it ask me to confirm firmware version which i have using *#1234#. My phone shows correct version.
Android version 2.3.6, kernel 2.6.35.11 build gingerbread.ucla1.
Could someone pls help? my husband also bought a used note and his updated just fine. I don't.believe this phone is rooted.
Any advice would much appreciated. Thanks!
Click to expand...
Click to collapse
Put it in download mode. Start kies and once it shows your phone as connected click emergency firmware upgrade have your s/n ready make sure you have 3 gigs of space on your pc and a internet connection. It will.restore to official ics for the i717. WARNING........ THIS WILL ERASE YOUR INTERNAL STORAGE MAKE SURE YOU BACK UP YOUR INTERNAL STORAGE BEFORE HAND. Stock ics sucks if i was you id root and install a custom ics. Example i am using the new blackstar Rom. Its the best Rom for ics in my eyes..goodluck.
Sent from my SAMSUNG-SGH-I717 using xda premium
I just exchanged my phone with AT&t today. Before doing so, I brought it completely back to stock from CM9.
Odin'd stock GB rom.
Odin'd stock radio (1).
Odin'd CWM.
Flashed flash counter reset via CWM.
After doing that, Kies let the phone update to official ICS. But only after doing all of that. At some point in there might be your problem.
Once I got the new phone home, I IMMEDIATELY rooted and restored to my CM9 backup. Stock anything is blegh.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Solved
I was also getting the message 'SGH-I717' does not allow initializing.
Going throught the post, I Booted the device with Vol-Up + Vol Dwn + Power (I kept the USB cable connected) and when the Samsung Logo first appeared released all the keys.
Once in the menu I selected last option click on Ok (the second touch button) then selected first option to reboot.
The phone booted normally and connect to Kies it asked for update. The update is downloading right now.

[Q] Firmware update issue

I finally got the LFB update OTA today after waiting for 2 weeks and I downloaded it but when I tried to install it, it stopped at 30%, rebooted the phone and gave an error message saying that it can't do the update and that I should use KIES.
I'm rooted with no mods installed or flashed apart from a few pushed apps into /system/app.
I've had an OTA update before and that installed fine but I wasn't rooted at the time.
I know i can flash via odin but id rather not.
Any help appreciated.
Sent from my GT-I9300 using Tapatalk 2
Riverriz said:
I finally got the LFB update OTA today after waiting for 2 weeks and I downloaded it but when I tried to install it, it stopped at 30%, rebooted the phone and gave an error message saying that it can't do the update and that I should use KIES.
I'm rooted with no mods installed or flashed apart from a few pushed apps into /system/app.
I've had an OTA update before and that installed fine but I wasn't rooted at the time.
I know i can flash via odin but id rather not.
Any help appreciated.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Kies sucks to be honest, it worked well on the S2 but on the S3 it doesn`t . What you can do is go to a service center and have them update it, flash with Odin as you said ( wich is the fastest and safest way btw) or wait for an OTA update. Or maybe retry a couple of times with Kies.
gee2012 said:
Kies sucks to be honest, it worked well on the S2 but on the S3 it doesn`t . What you can do is go to a service center and have them update it, flash with Odin as you said ( wich is the fastest and safest way btw) or wait for an OTA update. Or maybe retry a couple of times with Kies.
Click to expand...
Click to collapse
I think you misunderstood me. I haven't used kies yet. I've been trying to update via the OTA update and whilst its in 'download mode' (the one u get when flashing with odin) installing the update, it stops at 30% and the droid icon lies down with a red triangle on it. Then the phone reboots and gives me the error..
Btw, if I flash the latest firmware over my current stock LF2 via odin, will it wipe everything?
Sent from my GT-I9300 using Tapatalk 2
Riverriz said:
I think you misunderstood me. I haven't used kies yet. I've been trying to update via the OTA update and whilst its in 'download mode' (the one u get when flashing with odin) installing the update, it stops at 30% and the droid icon lies down with a red triangle on it. Then the phone reboots and gives me the error..
Btw, if I flash the latest firmware over my current stock LF2 via odin, will it wipe everything?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Sorry, wasn`t quite awake this morning Nothing will be wiped. The best thing you can do is to flash the rom yourself with Odin.
gee2012 said:
Sorry, wasn`t quite awake this morning Nothing will be wiped. The best thing you can do is to flash the rom yourself with Odin.
Click to expand...
Click to collapse
I think I'll pass on this update as Ive read around that they've removed the local search functionality when you long press menu on home screen.
Just gonna wait for a mod and then update.
Thanks for the reply
Sent from my GT-I9300 using Tapatalk 2
AS per posts its root that stops the update OTA .
jje
JJEgan said:
AS per posts its root that stops the update OTA .
jje
Click to expand...
Click to collapse
Root is not the issue. I am rooted with CF-Root v6.3 and it says so in the main thread that v6.3 supports OTA updates.
Sent from my GT-I9300 using Tapatalk 2
how to update camera firmware
After I root and install 3rd rom, my siii rear camera was bad, 'camera fault".
when click *#34971539#, there was no anything but "camera firmware standard", then jump to home screen, display a dialog box,"factory test stop".
Don't damage the hardware of the camera? But it has got well ever after I reset and dual wipe. I want to camera firmware, can I?
It's coming home, it's coming home, local search is coming home
Just in from my moan to Samsung Mobile UK:
"Samsung Mobile UK Hi Andy, Howard - the most recent software upgrade for the GALAXY S III in the UK included the inadvertent removal of the universal search function. Samsung will provide the correct software upgrade within the next few days. Thanks ^George
51 minutes ago · Unlike · 1"
https://www.facebook.com/SamsungMobileUK/posts/347306052014807?notif_t=share_comment
GTFI!!!!! :good::good::good::good::good::good::good::good:

[Q] Help pleaseee used odin by accident, cant figure out what to do

Hi,
Me and my partner both got s3's recently his on contract mine on like buy as you view. Mine received the 4.1.1 update through the phone and after waiting a few weeks and still nothing on his we decided to update it via computer. I used odin because i saw on a post that thats what you were supposed to use and flashed it to 4.1.1. I then realised i had put the wrong version on (German one i think) and it was causing errors so we flashed again to 4.1.1 the UK version.
He is now on:
Android version 4.1.1
Baseband version I9300XXDLID
I do not know if that's correct but everything seems a ok.
However since then my phone received the 4.1.2 update and we want the same update on his phone. It does not find it on the phone. Since then i learned KIES is the samsung software not odin. No updates can be found via KIES cos the software isn't supported. I want to be able to use KIES with his phone again, can i reverse the odin update anyway?? I rang samsung and he told me it will be like that forever now and i will never be able to use KIES?
Can anyone assist me. I really want ot be able to update from KIES again instead of using odin.
Sorry if i sound like a noob im only good with apple technology haha!! :laugh:
(edit)
P.S. My software is
Android version 4.1.2
Baseband version I9300XXELLA
we are both on Orange if thats any help? His came on Ice Cream Sandwich though and mine came on 4.1.1
If the phone isnt locked on orange just download 4.1.2 from sammobile and instal via odin as u did beffore.
Sent from my GT-I9300
Odin is official samsung. You can use Kies if you use OFW. If your current OFW doesn't support Kies, just download other from samfirmware.com.
Sent from my GT-I9300 using xda premium
i have no idea what OFW stands for lol. Samsung told me on the phone i should not have used odin as it will void warranty. Im trying to revert the update so that i can use kies again cos it will not work at all now, and get the updates directly on the phone. Is this even possible?
Fygaroo said:
If the phone isnt locked on orange just download 4.1.2 from sammobile and instal via odin as u did beffore.
Sent from my GT-I9300
Click to expand...
Click to collapse
If i do that will i still have to always use odin?
roxii said:
If i do that will i still have to always use odin?
Click to expand...
Click to collapse
Before flashing with odin try doing a factory reset on your device and then check if your device status is NORMAL to do that go to settings>about devoce>status>device status if it says normal then u are ok if it says modified try flashing the stock room with Odin and doing factory reset after the flash and if that dosnt work your device is maybe rooted and u need to unroot and do a triangle away here is the guide how to do that http://forum.xda-developers.com/showthread.php?t=1710613
roxii said:
i have no idea what OFW stands for lol. Samsung told me on the phone i should not have used odin as it will void warranty. Im trying to revert the update so that i can use kies again cos it will not work at all now, and get the updates directly on the phone. Is this even possible?
Click to expand...
Click to collapse
Yes you want 100\% the exact firmware that came with the phone including CSC .
A stock Samsung firmware can be flashed via Odin without any problems .
jje
Fygaroo said:
Before flashing with odin try doing a factory reset on your device and then check if your device status is NORMAL to do that go to settings>about devoce>status>device status if it says normal then u are ok if it says modified try flashing the stock room with Odin and doing factory reset after the flash and if that dosnt work your device is maybe rooted and u need to unroot and do a triangle away here is the guide how to do that http://forum.xda-developers.com/showthread.php?t=1710613
Click to expand...
Click to collapse
Heres whats confusing then.. it says device status normal without me doing anything to it. So shouldbt I be able to use kies and do updates from the phone?
Fygaroo said:
Before flashing with odin try doing a factory reset on your device and then check if your device status is NORMAL to do that go to settings>about devoce>status>device status if it says normal then u are ok if it says modified try flashing the stock room with Odin and doing factory reset after the flash and if that dosnt work your device is maybe rooted and u need to unroot and do a triangle away here is the guide how to do that http://forum.xda-developers.com/showthread.php?t=1710613
Click to expand...
Click to collapse
And when I check for updates on the phone it says latest update already installed but its definately still on 4.1.1. Ill update via odin to the orange 4.1.2 and see what happens
OFW is "official firmware"
JJEgan said:
Yes you want 100\% the exact firmware that came with the phone including CSC .
A stock Samsung firmware can be flashed via Odin without any problems .
jje
Click to expand...
Click to collapse
Ypu can achieve this by using KIES.
Open kies
Start recovering and make sure you can put your cells serial number somewhere
Connect phone only when kies asks to
Voila, stock as used to.
Kind regards,
Thomas
Sent from my GT-I9300 using Premium XDA-developers app
roxii said:
And when I check for updates on the phone it says latest update already installed but its definately still on 4.1.1. Ill update via odin to the orange 4.1.2 and see what happens
Click to expand...
Click to collapse
Thats probably because 4.1.2 is not out yet for that region carrier .
Fygaroo said:
Thats probably because 4.1.2 is not out yet for that region carrier .
Click to expand...
Click to collapse
Will that be because i accidentally put a different region on before i went back to uk? As i know its definately out as i have it on my phone and they are available on sammobile. I will try and restore through kies. Will i loose my data?
htcsnap93 said:
Ypu can achieve this by using KIES.
Open kies
Start recovering and make sure you can put your cells serial number somewhere
Connect phone only when kies asks to
Voila, stock as used to.
Kind regards,
Thomas
Sent from my GT-I9300 using Premium XDA-developers app
Click to expand...
Click to collapse
Hi just wondering im trying to do what you said, but my phone isnt showing up in a list to do it? Thanks
roxii said:
Hi just wondering im trying to do what you said, but my phone isnt showing up in a list to do it? Thanks
Click to expand...
Click to collapse
Search sammobile.com or use Google search .
jje
htcsnap93 said:
Ypu can achieve this by using KIES.
Open kies
Start recovering and make sure you can put your cells serial number somewhere
Connect phone only when kies asks to
Voila, stock as used to.
Kind regards,
Thomas
Sent from my GT-I9300 using Premium XDA-developers app
Click to expand...
Click to collapse
I've been wondering, does this method wipe user data or not?
Just curious.
esist said:
I've been wondering, does this method wipe user data or not?
Just curious.
Click to expand...
Click to collapse
im not bothered about loosing my user data but the option isnt there for me, it says phones that need this are listed below and the phone does not show. Not even if i put it in recovery mode. Any assistance would be great i am however just going to download some 4.1.2's today to try and fix it. I did notice however that when in download mode at the bottom it said something about multi CSC should it say this? LOL i wish i was more technologically savvy but i am literally only good at apple software. Wish id just waited Someone said to do one with BTU on the end and it should correct the CSC code? any idea if this is right?
I should however imagine it would delete all user data, people on other posts have said it was lost
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
roxii said:
im not bothered about loosing my user data but the option isnt there for me, it says phones that need this are listed below and the phone does not show. Not even if i put it in recovery mode. Any assistance would be great i am however just going to download some 4.1.2's today to try and fix it. I did notice however that when in download mode at the bottom it said something about multi CSC should it say this? LOL i wish i was more technologically savvy but i am literally only good at apple software. Wish id just waited Someone said to do one with BTU on the end and it should correct the CSC code? any idea if this is right?
I should however imagine it would delete all user data, people on other posts have said it was lost
Click to expand...
Click to collapse
Ok if u want the 4.1.2 update and u want to be able to use OTA i advise u to do flash the latest 4.1.2 room from this post http://forum.xda-developers.com/showthread.php?t=1646610 there is even a guide there how to flash it , if your device shows modified status after the flash just reboot into Android Recovery by holding Vol UP + Home + Power till you see Samsung Galaxy S3 displayed on screen , then u will see the recovery options, do a factory wipe and wipe cache then reboot and u should now be able to receive OTA updates .
I am also using the same room and all is working ok OTA shows no new updates but i think when the updates hits i will be able to get it via OTA , kies is not working but i think u dont need to worry about it because u can always flash via Odin .
Here is a guide how to flash a room with working Kies and OTA
First u need to root your device u can do this by following this guide http://forum.xda-developers.com/showthread.php?t=1957273
Edit: When u finish rooting u should use this app its called triangle away http://forum.xda-developers.com/showthread.php?t=1494114 and use it to reset the counter .
When u are done with triangle away then download this on your phone it available on play store https://play.google.com/store/apps/details?id=com.manniakk.cscselector&hl=en
Run it and change your CSC to BTU this will factory reset your phone after u done that u should flash the UK room from here http://forum.xda-developers.com/showthread.php?t=1646610
When u finish that u should boot into recovery and wipe data/factory reset , you should now be able to use Kies .
I am not sure this will work 100% but it should , if u could remember what was the CSC and room before you flashed the devices with odin you could flash that firmware.
Tell me if it worked.

Firmware Upgrading Issues?

Hey guys, Samsung finally released another update for the Galaxy Ace and i want to download it
I did recently root my phone + extended the internal storage
But when i try and do a software update with my phone it downloads but then it reboots and goes to the installing part it won't install and shows a notification saying Failed
I then tried to upgrade with Kies, and all it did was stay on 100% on the downloading components part, nothing was happening to my device
So then i Un-Rooted my phone and then tried the two steps above same thing happend
Now i am thinking to whipe my phone and re-try it?
Also could you answer these:
1. If my phone is rooted will it affect firmware upgrades / will it rooted make firmware upgrades fail
2. Do i need to put it on Download mode?
Just flash the firmware of your country using Odin V3.07.. Dont update via kies..
You can get firmware of ur country from samfirmware.com
Sent from my GT-S5830i using Tapatalk 2
Hit Thanx If I helped-XDA Rule
Succesful
Lalit Patil said:
Just flash the firmware of your country using Odin V3.07.. Dont update via kies..
You can get firmware of ur country from samfirmware.com
Sent from my GT-S5830i using Tapatalk 2
Hit Thanx If I helped-XDA Rule
Click to expand...
Click to collapse
I don't know how to do that, i just whiped my phone and it worked like a charm

Categories

Resources