Hi
I'm hoping someone can point me in the right direction as i'm at the end of my tether.
I have the bog standard S3 GT-i9300 Nordic (purchased in Sweden)
Trying to flash back to stock firmware I downloaded the I9300XXBLH3_I9300NEEBLH2_I9300XXLH1_HOME.tar.md5 firmware (4.0.4) Downloaded from Sammobile
Flashed with odin
Restart loop - so I went into recovery mode, cleared cache and reset, restarted fine....
Upon restart phone downloads firmware update.... Updates
The in settings - about device i have Android version 4.1.1 - Baseband version I9300XXDLID Build number JRO03c.I9300XXDLJ2 (French??)
Kernal version 3.0.31 -319653
[email protected]#1
SMP PREEMT Thu Oct 11 23:43:16 KST 2012
Although this firmware lets me use my Telia Sim card it will not let me use my 02 simcard - Now I know the phone was originaly unbranded & unlocked
I then went into Kies and restored there, entering the phones serial number etc.
The phone was then updated to 4.1.2 (Russia) I9300XXELL4
I have no idea what I have done for the phone not to restore back to stock official Nordic firmware that is unlocked.....
Any help is very much gratefully received.
Hunnypot said:
Hi
I'm hoping someone can point me in the right direction as i'm at the end of my tether.
I have the bog standard S3 GT-i9300 Nordic (purchased in Sweden)
Trying to flash back to stock firmware I downloaded the I9300XXBLH3_I9300NEEBLH2_I9300XXLH1_HOME.tar.md5 firmware (4.0.4) Downloaded from Sammobile
Flashed with odin
Restart loop - so I went into recovery mode, cleared cache and reset, restarted fine....
Upon restart phone downloads firmware update.... Updates
The in settings - about device i have Android version 4.1.1 - Baseband version I9300XXDLID Build number JRO03c.I9300XXDLJ2 (French??)
Kernal version 3.0.31 -319653
[email protected]#1
SMP PREEMT Thu Oct 11 23:43:16 KST 2012
Although this firmware lets me use my Telia Sim card it will not let me use my 02 simcard - Now I know the phone was originaly unbranded & unlocked
I then went into Kies and restored there, entering the phones serial number etc.
The phone was then updated to 4.1.2 (Russia) I9300XXELL4
I have no idea what I have done for the phone not to restore back to stock official Nordic firmware that is unlocked.....
Any help is very much gratefully received.
Click to expand...
Click to collapse
Post in Q&A forum..not here
Related
Hi there,
I currently purchased a new SG3. It has the vodafone branding which I want to change. When I do the *#1234# it shows me the following:
AP: I9300TDUALE6
CP: I9300TDULE6
CSC: I9300TVAUALE6
"About Device" reports:
Model Number: GT-i9300T
Android version: 4.0.4
Baseband version: I9300TDULE6
Kernel version: 3.0.15-CL554509-user
[email protected]#1
SMP PREEMPT Sun May 13 11:52:35 KST 2012
Build number: IMM76D.I9300TDUALE6
Am I able to change the software/firmware from Vodafone to the Telstra one located on Sammobile. Im unable to post outside links but heres a copy of whats available on sammobile.
Firmwares for GT-I9300T - All (10 latest)
Country/Carrier Date Android PDA CSC
Australia (Telstra) 2012 June 4.0.4 I9300TDUALF2 I9300TTELALF2
Australia (Telstra) 2012 May 4.0.4 I9300TDUALE6 I9300TTELALE6
I got no idea how all this rooting stuff works. Im trying to learn but I can get my head around it. So sorry if any of my questions seem stupid. Thanks for all your help in advance.
No need rooting to flash.
And yes you can flash Telstra firmware on Voda model, they are the same hardwares.
You need Odin 3.04 and need samsung usb driver or if you already have it working with Kies, then no worries about driver.
Here I copied the general instruction from the UK thread:
Instructions For Flashing Firmware:
Extract the firmware
Launch Odin
Turn off your device
Put your device into Download MODE (Home + Volume Down + Power)
Click PDA and select *.tar.md5
Then finally click START!
Thanks mate. Am downloading the firmware now. Its gonna take 2 hours to download.
Am I meant to change any of the options in Odin3?
Thanks again.
Now that I have flashed my galaxy s3 successfully.
I keep getting the message "Unfortunately, Messaging has stopped"
Does anyone know what this is or can direct me into the right place? Ive done a factory reset as another thread recommended but didnt work.
Thanks
I installed Omega 9 sometime back to try Jelly bean and it was a very bad idea.
So I wiped my phone within 10 mins as it was always crashing on me and downloaded the stock firmware
Today I was checking my GF's S3 and her software version is:
PDA:LFB / PHONE:LFB / CSC:LF3 (MID)
But mine says:
PDA:LFB / PHONE:LFB / CSC:LF3 (AFR)
Bear in mind that we live in the Middle East (Dubai)
Did I get the wrong firmware or something?
I am concerned that I may have downloaded a radio file that is optimized for Africa rather than middle east
I googled PDA:LFB / PHONE:LFB / CSC:LF3 (MID) but it doesn't come up with anything
---------------------------------------------------------------------------------------------------------------
This is the info from my GF's phone which is on the stock OS which was updated automatically OTA to 4.0.4:
I9300XXLFB
IMM76D.I9300XXBLFB
Kernel 3.0.15-782020-user
[email protected] #1
SMP PREEMPT Tue Jun 26 00:3010 KST 2012
Android Version: 4.0.4
----------------------------------------------------------------------------------
Mine says the same thing in the ABOUT section but in KIES it says I have the AFR version
every know and then I have to restart my phone and when I restart I get many whatsapp messages and emails and software updates so I think the radio is at sleep or not working sometimes which now I suspect may be linked to the fact that I am not running the MID version
please enlighten me and where to get the MID version for my firmware
thanks
Use the option to change your csc using dialer.. I don't remember the combination but you will get it here somewhere..
Otherwise use csc changer apply from the market..
You have been zooo==>ted
zoot1 said:
Use the option to change your csc using dialer.. I don't remember the combination but you will get it here somewhere..
Otherwise use csc changer apply from the market..
You have been zooo==>ted
Click to expand...
Click to collapse
*#272*<IMEI NO.>#
So then I will have the same radio file as hers and everything?
Also, if I do that, will I lose my current root and will have to re-root?
ahh I lost the root, If I re root now will I get back to point 0 and not being on MID or will I stay on MID now?
Hi everyone,
I need to get myself an official Hi3G Denmark branded firmware for my Galaxy S2 GT-I9100.
Reason: I just got phone out of repair and wanted to Root it and flash a custom ROM. After I rooted it, KIES could not recognize my firmware and did not offer any more updates for my phone. Plus, I could not back it up any more.
I think it has something to do with me flashing custom kernels and firmware to it.
Noob as I am, I did not backup my clean phone with CWM and have been since searching for an original firmware.
I have been searching XDA/Google up and down and flashed various firmwares, branded and unbranded, odexed/deodex and what not, to no avail...
Now I am running a firmware with which almost everything is working, except KIES update and backup (well, as far as I noticed).
Info:
PDA: i9100XWLPT
PHONE: i9100XXLQ6
CSC: i9100NEELP4
Build Info: Fri Jul 27 17:41:49 KST 2012
Kernel version: [email protected]) ) #49 SMP PREEMPT Tue Sep 11 12:21:20 PDT 2012
Build number: IMM76D.WXLPT
Thank you in advance for your time and help.
Andrei81 said:
Hi everyone,
I need to get myself an official Hi3G Denmark branded firmware for my Galaxy S2 GT-I9100.
Reason: I just got phone out of repair and wanted to Root it and flash a custom ROM. After I rooted it, KIES could not recognize my firmware and did not offer any more updates for my phone. Plus, I could not back it up any more.
I think it has something to do with me flashing custom kernels and firmware to it.
Noob as I am, I did not backup my clean phone with CWM and have been since searching for an original firmware.
I have been searching XDA/Google up and down and flashed various firmwares, branded and unbranded, odexed/deodex and what not, to no avail...
Now I am running a firmware with which almost everything is working, except KIES update and backup (well, as far as I noticed).
Info:
PDA: i9100XWLPT
PHONE: i9100XXLQ6
CSC: i9100NEELP4
Build Info: Fri Jul 27 17:41:49 KST 2012
Kernel version: [email protected]) ) #49 SMP PREEMPT Tue Sep 11 12:21:20 PDT 2012
Build number: IMM76D.WXLPT
Thank you in advance for your time and help.
Click to expand...
Click to collapse
Download it here: www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=HTD&os=1&type=1#firmware
Swyped from my Samsung Galaxy SII
Jokesy said:
Download it here: link
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thanks for the suggestion. Still No go. All core processes stop after flashing the new firmware i.e. acore, messaging, softwareupdate, etc.
and KIES does not even recognize my phone.
Still looking for the right firmware... The same that would have been pushed through KIES.
Aynone?
Andrei81 said:
Thanks for the suggestion. Still No go. All core processes stop after flashing the new firmware i.e. acore, messaging, softwareupdate, etc.
and KIES does not even recognize my phone.
Still looking for the right firmware... The same that would have been pushed through KIES.
Aynone?
Click to expand...
Click to collapse
u should do a factory reset after flashing a new firmware to get rid of all that errors.
but before that u should backup ur contacts/apps and data by 'Titanium Backup' app
Sun90 said:
u should do a factory reset after flashing a new firmware to get rid of all that errors.
but before that u should backup ur contacts/apps and data by 'Titanium Backup' app
Click to expand...
Click to collapse
Thanks. will give it a try and post back.
Sun90 said:
u should do a factory reset after flashing a new firmware to get rid of all that errors.
but before that u should backup ur contacts/apps and data by 'Titanium Backup' app
Click to expand...
Click to collapse
Did back up, flash, factory reset. Still get error: process.google.gapps has stopped on startup and when I tried to restore data from KIES.
Will try to restore stuff with My Backup Pro and Titanium...
Stomped...
Thanks for the help and support so far everyone!
Andrei81 said:
Did back up, flash, factory reset. Still get error: process.google.gapps has stopped on startup and when I tried to restore data from KIES.
Will try to restore stuff with My Backup Pro and Titanium...
Stomped...
Thanks for the help and support so far everyone!
Click to expand...
Click to collapse
Issue SOLVED by deleting all sync accounts and re-adding them.
I got my S II with custom MIUI ROM. Then I downloaded and flashed with Odin stock 4.0.3. ROM. Everything was OK, then it updated over WiFi to 4.0.4 and installed some other updates and this is what I got on my phone now.
after dialing *#1234#:
VERSION
PDA : I9100XWLPX
PHONE : I9100XXLQ6
CSC : I9100NEELP5
Build info : Wed Aug 29 13:25:19 KST 2012
(and 1st phone screenshot current info)
Today I updated Kies on PC to latest version, plugged in my phone and got message that there is new firmware.
(2nd screenshot on PC)
When I try update over WiFi I get no new updates available...
According to SamMobile Firmware page this update is 4.0.3 (http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=NEE&os=1&type=1#firmware)
Nordic countries ------- 2012 October ------- 4.0.3 ------- I9100XWLPY ------- I9100NEELP6 ------- Download ------- Unlock ------- Info
Why does it want me to downgrade?
So should I update or not?
It does not want you to downgrade. The only difference between the 2 firmwares is the csc version.
your current version is csc LP5 NEE.
updated version on kies csc LP6 NEE.
apprently kies version has a newer csc.
1. will it remain on current 4.0.4 version?
2. will this process of updateing CSC delete everything (factory reset)?
3. should I do it ?
Thanks.
sorry i missed one other peice of information.
It will be upgraded to XWLPY which is newer then XWLPX.
Hi their all im matt
what it is i have the samsung galaxy s3 i9300 i bought it from carphone warehouse a while back in london (uk obviously) on sim only, so it wasnt branded etc.
Anyway shortly after a while i wanted to root it as i heard about all the benefits etc, so i used the samsung toolkit 7.0 and it rooted fine
anyway for some reason i ened up unrooting it i cannot remember why but i did, and now my device status shows as MODIFIED, and the OTA updates does seem to work as it just says searching but does nothing, ( im guessing this is because i unrooted and the device status says modified)
but before i rooted in the first place i never wrote down what firmware was on the model ( obviously the stock rom but i dont know what rom it was seen as i bought it from carphone warehouse in the uk)
but i wish to root my mobile again but also have the stock rom what came with the actual phone installed.
the rom information on my mobile is :
andorid version: 4.1.2
Baseband version: i9300XXELKC
Kernal version: 3.0.31-742798 [email protected] #1 SMP PREEMPT SAT DEC 22 17:04:04 KST 2012
Build number JZO54K.I9300XXELKC
can anybody tell me if this is the stock rom that came on my phone when i bought it from carphone warehouse or did i do something wrong when i rooted it in the first place and its installed some other rom. as i just want the stock rom and be able to update as normal but be rooted and device status to be OFFICAL and not MODIFIED
hope somebody can help me with step-by-step instructions
thank you
I've rooted and unrooted a few times, and yes because it says modified you are unable to update. The easiest way and the way i have previously done it was download
http://forum.xda-developers.com/showthread.php?t=1703488
and run the flash stock via Odin, this will download a stock firmware which it will then install. Follow the steps to the letter though.
Ive managed to update via kies previously and had an OTA update for it too.
The Uk unbranded firmware version is BTU, if it asks and i believe if you install XXELLA it will then update via kies.
Hi i used the samsung toolkit v7.0 like you said and ODIN loaded up and used the flash thingy but it does nothing to my mobile.
it still says
andorid version: 4.1.2
Baseband version: i9300XXELKC
Kernal version: 3.0.31-742798 [email protected] #1 SMP PREEMPT SAT DEC 22 17:04:04 KST 2012
Build number JZO54K.I9300XXELKC
in the about device.
so what firmware should be on my galaxy s3, if i bought it from carphone warehouse in uk should it be BTU or ELLA
arnie2012 said:
Hi i used the samsung toolkit v7.0 like you said and ODIN loaded up and used the flash thingy but it does nothing to my mobile.
it still says
andorid version: 4.1.2
Baseband version: i9300XXELKC
Kernal version: 3.0.31-742798 [email protected] #1 SMP PREEMPT SAT DEC 22 17:04:04 KST 2012
Build number JZO54K.I9300XXELKC
in the about device.
so what firmware should be on my galaxy s3, if i bought it from carphone warehouse in uk should it be BTU or ELLA
Click to expand...
Click to collapse
BTU is the country code for the firmware. Basically a uk firmware has BTU on it. ELLA is the firmware version. I flashed that one and it was 06 on the selection screen from that toolkit. I managed to do firmware upgrade OTA successfully.
Now that odin has finished does it still say modified?
Sent from my GT-I9300 using xda app-developers app
ok iv downloaded and flashed a rom im beliving is the correct one now it says
android version 4.1.2
baseband version i9300XXELLA
Kernal version 3.0.31-742798 [email protected] #1 SMP PREEMPT sat Dec 22 17:04:04 KST 2012
Build number - JZ054K.I09300XXELLA
under device status, it still says modified
i loaded up Kies and now it says, the firmware i have on my s3 is not supported to recieved updates through kies
i try OTA updates and it just loads nothing happens
before i downloaded this rom i have on now, i followed all your previous intructions and i flashed 06 form the selection but it doesnt do anything to my phone
what is happening i dont understand, thank you i appreciate your time helping me to get my mobile back to normal
Im at work till 9 but I'll try and run the flasher and set mine back to stock to see if I can run the update afterwards.
Like I said ive done it before so unless they have changed something in one of the updates to ELLA it shluld bw working. Ill post again once ive done it and let you know
Sent from my GT-I9300 using xda app-developers app
reset phone
right i heard about a csc changer and as you said before my samsung galaxy s3 should be on BTU, but it appears it wasnt, it looked like it was on XEO.
so i installed csc changer from the google play and it reset my mobile.
device status: says normal,
in download mode, everything is offical again.
but im not rooted
how do i get my mobile rooted without anything changing to custom again
not: i backed up all my apps via titanium
Im pretty sure rooting your device changes it back to modified as its flashes a new image.
Triangle away by chainfire can reset the flash counter so possibly give that a try.
Sent from my GT-I9300 using xda app-developers app