[FIX] & [DOWNGRADE HBOOT] - Stupid Bootloop with HBOOT 1.58 EVO 3D - UPDATED 1-7-13 - HTC EVO 3D

[FIX] & [DOWNGRADE HBOOT] - Stupid Bootloop with HBOOT 1.58 EVO 3D - UPDATED 1-7-13
My friend's phone had the annoying bootloop problem. I'm posting this because after a lot of searching, I found nothing to fix the bootloop, just people asking about it. Here's a simply fix.
BOOTLOOP FIX:
If you already tried unlocking/ and you're still S-On, then set everything back to stock:
Flash the attached stock recovery,
fastboot oem lock to be locked again.
Use the latest RUU to update the phone.
At this point the stock, locked phone should function normally.
I have busted this phone a ton of times trying to get different recoveries and roms to work, and this method has always fixed the bootloop.
At this point you can try whatever tutorial you like to downgrade or customize the phone...and if it breaks, hopefully this method will still work for you. If it doesn't work the first time, try running the RUU a second time. Or third.
CUSTOM RECOVERY:
If you want to unlock and install custom stuff:
Use the HTC Dev unlock method.
Fastboot install CWM Recovery v5.8.0.1 from their website -
The ONLY recovery that I've found to be compatible with HBOOT 1.58 is CWM v5.8.0.1. Everything else leaves the phone in an infinite bootloop. Maybe others have had different experiences.
To fastboot install the CWM recovery, rename the file to recovery.img (for simplicity) and type in a command prompt (same directory as fastboot and recovery.img):
fastboot flash recovery recovery.img
Then, to enter into recovery, either pull the battery and enter recovery through the bootloader menu, or type in:
fastboot boot recovery.img
This should get you into the working CWM recovery. If it doesn't, it's because HTC hates people that buy their phones.
If you feel like giving up and running stock, all you need to do is reflash the stock recovery, and relock the phone using fastboot oem lock - and now it should run the stock rom...and if it doesn't, then rerun the RUU. Tedious.
HBOOT Downgrade & S-Off:
If you have: Stock 2.89 RUU / Locked / S-On
Unlocked with HTC Dev method
Flash CWM 5.8.0.1 from the CWM website:
fastboot flash recovery recovery.img - then
fastboot boot recovery.img (to enter recovery)
Flash the SetMainVersionLOW.zip file attached (thanks ramjet73)
Relock the phone with: fastboot oem lock
Use the Unknownforce/closeone hboot downgrade with live CD using the 2.89 RUU's rom.zip (from windows temp folder) renamed to PG86IMG.zip - go to the Unknownforce/closeone thread for this part: http://forum.xda-developers.com/showthread.php?t=1563342
Then flash the standard 1.13 RUU on your windows system (may also work with the PG86IMG.zip method, have not tested)
Then use revolutionary 0.4pre4 to S-Off
Finally, you need to flash a custom recovery which you can do from revolutionary, or from fastboot as listed above. Once the recovery is installed, you should be able to install a compatible custom rom and kernel.
You bootloader screen should now say REVOLUTIONARY on top instead of UNLOCKED or RELOCKED etc... and show HBOOT 1.40.1100.
Thanks to Unkownforce, closeone, and ramjet73 for making this possible.
PS. Screw up your phone at your own risk.

---

In case anybody was wondering, the RUU I've been using is the latest one at the time of this post: RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe

---

If by "reset s-on" you mean to switch s-off to s-on using the "write secureflag 3" command, then there is no need to do that., you can directly run RUU.exe on S-OFF and any recovery (hboot needs to be one of the stock versions I guess, I dont know for sure).
And I dont know if theres any relation with hboot version and recovery but TWRP and 4ext recovery works for every hboot. And if you are s-on, you dont always have to flash boot.img seperately using fastboot if you turn smartflash on.

---

mnomaanw said:
If by "reset s-on" you mean to switch s-off to s-on using the "write secureflag 3" command, then there is no need to do that., you can directly run RUU.exe on S-OFF and any recovery (hboot needs to one of the stock versions, I dont know for sure).
And I dont know if theres any relation with hboot version and recovery but TWRP and 4ext recovery works for every hboot. And if you are s-on, you dont always have to flash boot.img seperately using fastboot if you turn smartflash on.
Click to expand...
Click to collapse
Yeah, don't ever do the write secure flag command. That's bad news. Running a ruu will not s- on, and you're better staying s-off
Sent from my PG86100 using xda app-developers app

---

Reset s-on, and
fastboot oem lock to be locked again.
Click to expand...
Click to collapse
As others have mentioned, this is completely unnecessary. Once you're s-off htc's unlock is a non-issue and you can run any RUU you wish to at any time.
I know of no reason whatsoever where someone would need to set S-ON once it's off.

---

xHausx said:
As others have mentioned, this is completely unnecessary. Once you're s-off htc's unlock is a non-issue and you can run any RUU you wish to at any time.
I know of no reason whatsoever where someone would need to set S-ON once it's off.
Click to expand...
Click to collapse
@xHausX
Totally agree. The only reason to set S-ON once S-OFF is achieved is to return to 100% stock for warranty service or to sell the phone.
Nice to see you in these parts again and Happy New Year!
@joshdv
The CWM recovery version (6.0.1.4) you attached to the OP gives an error about accessing mmcblk0p34 when used with the engineering (ENG) bootloader, which a lot of Evo 3D users have installed to run GB or AOSP based ROM's. The current version of TWRP2 (2.3.3.0) has a similar error about the misc partition and I don't know if those errors will affect anything else or not. Apparently those errors are caused by variations in the emmc partition layouts with different bootloaders.
I prefer to use 4EXT which doesn't show any errors once cache+dalvik are formatted.
ramjet73

---

I updated the OP. I read somewhere else that it was necessary, this phone was never S-Off, so I wasn't sure.
Thanks

---

Everytime i run the ruu for my 3d it will finish as it has completed and boot. But whenever i remove my battery to switch it with a secondary, i used to do this before bed every night, i get a bootloop and cant boot untill i boot into bootloader and select the recovery option which wipes the phone and boots untill then next time i remove the battery. Why wont the RUU fix this? ive ran it multiple times. And also whenever im in the stock recovery and i select factory reset or any of the options i get "invalid option" "sucess rebooting by reason oem-00" what does this mean!?! can this be my sd? cause i cant mount cache recovery command or mount anything in recovery for that matter. if i need an sd ill buy one. just dont wanna find out its not my sd. and ive run the RUU about 7 times in total and nothing helps. thanks

---

ramjet73 said:
@joshdv
The CWM recovery version (6.0.1.4) you attached to the OP gives an error about accessing mmcblk0p34 when used with the engineering (ENG) bootloader, which a lot of Evo 3D users have installed to run GB or AOSP based ROM's. The current version of TWRP2 (2.3.3.0) has a similar error about the misc partition and I don't know if those errors will affect anything else or not. Apparently those errors are caused by variations in the emmc partition layouts with different bootloaders.
I prefer to use 4EXT which doesn't show any errors once cache+dalvik are formatted.
ramjet73
Click to expand...
Click to collapse
Yeah, I put WIP because it still never worked right, it was just the only one that ever actually loaded. I still hate this phone, I wish HTC was as nice as Samsung. It's so easy to work with Samsung, I always get mad trying to work around HTC's crippling B.S. Still better than Motorola though.

---

bootloop in my Htc Evo 3D hboot 1.53.007

---

How do you flash the stock recovery?

---

jcthelight said:
How do you flash the stock recovery?
Click to expand...
Click to collapse
put your phone into the bootloader by holding the volume down key while turning it on.
Assuming you have the sdk tools, or some basic set like QADERSO.zip:
select fastboot from the bootloader menu, then connect it to your computer with a usb cable (should change to fastboot usb)
in a command prompt (or terminal window, depending on your OS)
Go into the folder containing both fastboot and the recovery.
Type in: fastboot flash recovery recovery.img (rename the stock recovery included in the OP to just recovery.img)
Once that is complete, you will have the stock recovery.

---

joshdv said:
put your phone into the bootloader by holding the volume down key while turning it on.
Assuming you have the sdk tools, or some basic set like QADERSO.zip:
select fastboot from the bootloader menu, then connect it to your computer with a usb cable (should change to fastboot usb)
in a command prompt (or terminal window, depending on your OS)
Go into the folder containing both fastboot and the recovery.
Type in: fastboot flash recovery recovery.img (rename the stock recovery included in the OP to just recovery.img)
Once that is complete, you will have the stock recovery.
Click to expand...
Click to collapse
i have hboot 1.53 with s-on stuck on bootloop and i did as u said i flashed stocked recovery from temp folder from ruu-ics-35-ara.exe still my phone is in boot loop. Even i tried oem lock and run ruu.exe file upto 65% process goes fine then suddenly shows 100% process complete and reboot device(still stuck on bootloop).... plz give me suggestion to get rid of this thing.....
"RUU_SHOOTER_U_ICS_35_S_HTC_ARA_3.28.415.2_Radio_11.77.3504.00U_11.25.3504.06_M_release_264795_signed.exe"

---

joshdv said:
put your phone into the bootloader by holding the volume down key while turning it on.
Assuming you have the sdk tools, or some basic set like QADERSO.zip:
select fastboot from the bootloader menu, then connect it to your computer with a usb cable (should change to fastboot usb)
in a command prompt (or terminal window, depending on your OS)
Go into the folder containing both fastboot and the recovery.
Type in: fastboot flash recovery recovery.img (rename the stock recovery included in the OP to just recovery.img)
Once that is complete, you will have the stock recovery.
Click to expand...
Click to collapse
I'm a little confused. I've never rooted this phone so it's completely stock. My phone keeps powercycling. When I type in "fastboot flash recovery recovery.img" my cmd prompt tells me FAILED (remote: signature verify fail).
Any suggestions?

---

Re: [FIX] & [DOWNGRADE HBOOT] - Stupid Bootloop with HBOOT 1.58 EVO 3D - UPDATED 1-7-
Dang it! Why does it seem like developers have quit developing fully functioning roms for this phone? I live in a good 4g area so those roms without it are out of the question for me. And the others are having major issues with cameras, video playing, text messaging that keep it from being a daily....
And after using jellybean these ICS roms feel very incomplete even though they're more functional. I know you developers are busy people but please, can ICS get freshened up. Or just ignore me if y'all think the camera/text thing will be resolved very soon.
Sent from my PG86100 using xda premium