Solution for battery drain on FXP201 CM9 (All Xperia) - Sony Xperia P, U, Sola, Go

I managed to find a lifeline to the problem of battery drain on CM9 FXP201 ..
-First I installed the custom kernel that the user "thebrainkafka" has posted LINK KERNEL--->http://forum.xda-developers.com/attachment.php?attachmentid=1618508&d=1357379108
PS: I found the kernel in the section of "Xperia Sola" so I don't know if it is compatible with all 2012 Xperia
-Finally I installed the app "Smart Governors" that sets a governor and a scheduler. As Governor I selected PegasusQ v.003 and scheduler sio.
LINK APK---> http://forum.xda-developers.com/attachment.php?attachmentid=1552439&d=1355162468
I noticed a significant improvement of battery life without sacrificing much performance without 3g arrival to cover thoroughly the day and a half
Leave some feedback if you try it!
I am not responsible for any damage
...do not forget to make a backup if something goes wrong!!
bye, IrRo94.

i used that kernel too... he posted a link on page 102 or 101 in the FXP thread for Xperia P... but now DeepUnknown has released a new kernel for CM9 and i personally find that to be better. and oh... he uses Sony's latest source too

chewdaniel said:
i used that kernel too... he posted a link on page 102 or 101 in the FXP thread for Xperia P... but now DeepUnknown has released a new kernel for CM9 and i personally find that to be better. and oh... he uses Sony's latest source too
Click to expand...
Click to collapse
Link please and is it compatible with CM9.1????
Sent from my Xperia Sola using xda premium

oh it's very compatible
http://forum.xda-developers.com/showthread.php?t=2089718

chewdaniel said:
oh it's very compatible
http://forum.xda-developers.com/showthread.php?t=2089718
Click to expand...
Click to collapse
But its for P not Sola
Sent from my Xperia Sola using xda premium

ahhh i failed to see that in ur sig my bad then oh well... but then... no harm trying u can always reflash a sola kernel if it doesn't work

chewdaniel said:
ahhh i failed to see that in ur sig my bad then oh well... but then... no harm trying u can always reflash a sola kernel if it doesn't work
Click to expand...
Click to collapse
Does it work on Xperia U? sorry for stupid question , I'm a newbie

chewdaniel said:
ahhh i failed to see that in ur sig my bad then oh well... but then... no harm trying u can always reflash a sola kernel if it doesn't work
Click to expand...
Click to collapse
It won't bro n I'll brick the phone cause its meant for P and if it where only CM kernel modified den even there where slight but if Sony sources of P is used then it won't work ...
As it is I've request the dev to make one foe Sola ...
Cheers
Sent from my Xperia Sola using xda premium

soulhackereborn said:
It won't bro n I'll brick the phone cause its meant for P and if it where only CM kernel modified den even there where slight but if Sony sources of P is used then it won't work ...
As it is I've request the dev to make one foe Sola ...
Cheers
Sent from my Xperia Sola using xda premium
Click to expand...
Click to collapse
Installing p Kernel on sola wont brick it
At max a soft brick
I installed xp kernel on xu ( by mistake not by choice) and I just had to remove the battery to get back flashmode and fastboot
Ps - omg.
Sola n p have non removable batteries

However, in 3 days will be released the new build of CM9 (FXP202) which has a new kernel
CHANGELOG
Code:
FXP202
CM9.1
- latest cm 9.1
- audio latency (U,P,Sola,Go)
- small HDMI change (P)
- compcache fix (U,P,Sola,Go)
- kernel update (U,P,Sola,Go)
- blob update (U,P,Sola,Go)
!!!! first flash stock 6.1.1.B.1.54 to update your modem FW for U,P,Sola,Go !!!
Wasted effort ..! : (
IrRo94

Guys,
Just get Deep Sleep Battery Saver from Play Store. You can easily save battery.. I get more than a day, and i'm damn happy with it. No more wake locks :thumbup:
Sent from my Xperia U using Tapatalk 2

...now should wait for the next build without installing useless junk

one of solutions is custom kernel - ThP, Sliding, Neuro etc.

Dron_GTR said:
one of solutions is custom kernel - ThP, Sliding, Neuro etc.
Click to expand...
Click to collapse
Compatible CM9?

That kernel are for P for other device?

I use FXP202 @Go and there is no battery drain.

Dron_GTR said:
one of solutions is custom kernel - ThP, Sliding, Neuro etc.
Click to expand...
Click to collapse
this is only for Xperia P, right?

itachilinux said:
this is only for Xperia P, right?
Click to expand...
Click to collapse
Check Performance settings ans Set min frequency To 200

Great info, i will try
Sorry for my bad english

Related

[ROM] Unofficial Sony ICS 4.0.4 | Leaked from Xpreria Pro | 4.1.B.0.431

Just want to share guys, this is a leaked version of Xperia Pro's ICS 4.0.4, ported to Neo V.
DISCLAIMER:
This is based from Sony ICS for Xperia Pro to work with Xperia Neo V only (hw config and camera drivers) and it is under development (meaning still BETA). And I'm not responsible for any damages that might caused from your phone from not working properly. Use it at your own risk.
Features
fast UI transistions and smooth as GB (tested by ME)
Same UI, Apps, from Official ICS for Neo V, Ray, and Arc S
Rooted / Busybox
Fast wifi
Download:
http://www.mediafire.com/?q4ag6aq7777lfsz
Installation:
Install via recovery
Test Device Used:
Xperia Neo V (Asia-PH Version)
NE-RC3 Kernel - OCed at 1.4Ghz - On-Demand - Set Limit Process to 2 and removed monitoring apps such as (device monitor, crashsms, logcats, and etc.)
Credits goes to: zdzihu & ameer1234567890
some screen shots:
Waiting for it
I can not wait
please add screen shot..
also lets us know what is working and not working
Sent from my Xperia NeoV using XDA
waiting for download links....
@all:
posted download link ..
hello
is it possible to install this and after that patch for neo, does anyone have patch, or is other official ics rom neo patches ok hope you got me
Dont Download -,-
the settings menu is supersmooth, but homescreen transitions is really unsmooth, nothing compared to cm9, trust me, its not worth downloading
Why doesn't Sony updates the kernel to ver 3
Sent from my MT11i using Tapatalk 2
DrearierJester1 said:
this ROM will only work on unlocked bootloaders
Click to expand...
Click to collapse
Why?
It's stock rom, working fine on stock 4.0.3 kernel. Everyone who have CWM(which can be installed with stock kernel) can flash this zip, right?
And in case someone is wondering, Arc ROM thread: http://forum.xda-developers.com/showthread.php?t=1655067
Source: http://forum.xda-developers.com/showthread.php?p=26035898
It's faster than 4.0.3
Thanks
Is there Dialer and Contacts lag?
TNX in advance!
SHIRI said:
Is there Dialer and Contacts lag?
TNX in advance!
Click to expand...
Click to collapse
its better than 4.0.4..
a bit lag..
Akizella said:
the settings menu is supersmooth, but homescreen transitions is really unsmooth, nothing compared to cm9, trust me, its not worth downloading
Click to expand...
Click to collapse
CM9 is not a fully functional rom. Its 100% functional.
Battery life is far better. Home screen is not too lagy to wait, just a little jerk.
It can be super fast and smooth if some of our great developers add some tweaks.
Hope sony is approaching up to mark (but oviously slowly). Just have patience.
archijit said:
CM9 is not a fully functional rom. Its 100% functional.
Battery life is far better. Home screen is not too lagy to wait, just a little jerk.
It can be super fast and smooth if some of our great developers add some tweaks.
Hope sony is approaching up to mark (but oviously slowly). Just have patience.
Click to expand...
Click to collapse
I have had mine OC to 1.4Ghz On-Demand and set limit processes to 2 and remove some bloatwares, unnecessary monitor apps and i think this version is usable than 4.0.3.
Akizella said:
is it possible to install this and after that patch for neo, does anyone have patch, or is other official ics rom neo patches ok hope you got me
Click to expand...
Click to collapse
just look for a Neo camera patch and you're good to go.. sorry mate but I only have Neo V so can't relate much on Neo camera drivers...
For locked or unlocked??
darky22 said:
For locked or unlocked??
Click to expand...
Click to collapse
OP says, for unlocked bl.
Sent from my Neo V with supercharged ICS ^^
try and let us know pandemic
darky22 said:
try and let us know pandemic
Click to expand...
Click to collapse
I dont try this my ics is good enough, i wait on official release.
Sent from my Neo V with supercharged ICS ^^

CM9-Neo L [Kernel][ROM] Based CM9.1[Kernel Updated-28/11/2012 ]

Code:
##############T&C#####################
By Unlocking the bootloader you warranty is void-->From SOny
This is free kernel from my side took me some time to figure
out how to /what to do to make this kernel
IF something happen with your device you will have to figure it out yourself..
I won't be held responsible if You Hard Brick your device.
Free advice:Soft brick
can be recovered by flashing firmware so keep that in handy--http://d-h.st/Vft
#####################################
Code:
Thanks for being with me in the journey with Neo
L(My first Dev device). I had to move on from it due to
some personal reason. For some time I didn’t own
an android device to test on. SO could not answer all
your quires sorry for that.. But now I am happy to
see lots of Dev flooding to Neo L especially from Play.
It was the fun to discover Neo L= Play-game pad ;)
Now that both the community can help each other. It
is time for me to retire from Neo L and to Move on.
Dear fellow Dev if you need any questions ask me. I
will answer as and when I get time. I am back with
android. From now this thread is closed. I won’t be
monitoring this thread/answering questions here.
Hi,
Guys here I share CM9 For Neo L, form Cyanogenmode source.. tweaked and the ROM is moded from Xperia Play
Code:
Links
ROM
http://d-h.st/VIr
Kernel
http://d-h.st/WPr
[B]Kernel with other Governers --updated /28/11/2012[/B]/
http://d-h.st/LkS
Gapps
http://goo.im/gapps/
Spcl thanks to FXP for source
an0nim0us for helps with first endeavor
and championswimmer for Guidance
Click to expand...
Click to collapse
Laste Edited-27/11/2012
Updated Kernel with few Governers IO schedulers
**Added Nightly Build CM9.1 you can try it from here https://docs.google.com/open?id=0ByNPPw6PDxkkOThPLTJRNlJpdHM
(all Hail to Freexperia I am just a humble Porter thank them I am serious thank them)
First
Working
Camra
Wifi
Calling
Not working
Bluetooth
Click to expand...
Click to collapse
Found any bug let me know
How to install
# Copy Zip to SD card
# Install Kernel
# Do a full wipe ,Factory reset,Dalvic cache
# Install Zip
# Install Gapps if wanted
# Reboot
Click to expand...
Click to collapse
Guys be patient this is my first release/port of Rom there are bugs. I will try to fix it. Just let me know of it.. n this I am doing with my free time after work.. so Don't push me too much have a great day
Second
Mother of invention is your need. And the first step to freedom/madness is unlocking your boot loader when its still in warranty
Latest kernel governers screenshots(lazy to type) can be found
http://forum.xda-developers.com/showpost.php?p=34741996&postcount=44
hey , i tried the rom .
working good, oda then cam
there is prob with bightness(its decreasing aftr locking n unlocking the ph )
n cnt reboot into recovery with reboot into recovery opt.
if i find ny more bugs ill report .
EDIT:sensor while on call is buggy
kunalasrani said:
hey , i tried the rom .
working good, oda then cam
there is prob with bightness(its decreasing aftr locking n unlocking the ph )
n cnt reboot into recovery with reboot into recovery opt.
if i find ny more bugs ill report .
EDIT:sensor while on call is buggy
Click to expand...
Click to collapse
for brightness,set it to full bright,lock your phone,unlock and then is autobrightness.thats why its decrease.
for camera take these files from your phone and replace these in cm rom:
system/lib/libcald_hal.so + libcald_pal.so + liboemcamera.so
system/usr/semc/camera/*all files*
it may work,maybe not!
Thnks will try, there isnt any way to undo auto brightness?
Cnt find nythin in settings
Sent from my NeoL using xda app-developers app
Leg works done aokp should be easy now
hi
kormatoes said:
Leg works done aokp should be easy now
hi
Click to expand...
Click to collapse
ya AOKP I wanna see that too...
termagazis said:
for brightness,set it to full bright,lock your phone,unlock and then is autobrightness.thats why its decrease.
for camera take these files from your phone and replace these in cm rom:
system/lib/libcald_hal.so + libcald_pal.so + liboemcamera.so
system/usr/semc/camera/*all files*
it may work,maybe not!
Click to expand...
Click to collapse
I tried "liboemcamera.so" but it failed
other files are nt present in stock NeoL
Dude !! I guess there prob with deep sleep too ,
I had gone to sleep with 80% batt n in the morning there was only 6% left ...
Sent from my NeoL using xda app-developers app
kunalasrani said:
Dude !! I guess there prob with deep sleep too ,
I had gone to sleep with 80% batt n in the morning there was only 6% left ...
Sent from my NeoL using xda app-developers app
Click to expand...
Click to collapse
I have patched to bfs scheduler to the kernel try that.. btw I have seen the battery drain.. The same I observed at CM9 with my LWW.. I have to see if its a kernel issue or ROM..
Battery consumption with mine was around 15% with no wifi no data at night... with BFS patched kernel.. with Smartassv2 governer..
kormatoes said:
Leg works done aokp should be easy now
hi
Click to expand...
Click to collapse
b00tbu9 said:
ya AKOP I wanna see that too...
Click to expand...
Click to collapse
had a word with OP
coming soon !!!!
hi
can someone please explain how to get cwm recovery installed on neo L
please?
http://forum.xda-developers.com/showpost.php?p=31364824&postcount=3
Recovery n DSP
b00tbu9 said:
http://forum.xda-developers.com/showpost.php?p=31364824&postcount=3
Recovery n DSP
Click to expand...
Click to collapse
heyy, both the link are showing 404 error ..
kunalasrani said:
heyy, both the link are showing 404 error ..
Click to expand...
Click to collapse
Check again + CM9.1 has recovery and DSP in it
can u plzz tell me how to unlock bootloader
can anyone tell me how to unlock bootloader of my xperia neo l...plzplzplz help me out guyzzz
swarimk said:
can anyone tell me how to unlock bootloader of my xperia neo l...plzplzplz help me out guyzzz
Click to expand...
Click to collapse
Buddy the answer is there u just have to search....
http://forum.xda-developers.com/sitesearch.php?q=unlock xperia bootloader
and if you finding it hard to digest...
get this tool this is the one I have used first.....
http://forum.xda-developers.com/showthread.php?t=1560613
Thanks for your hard work dude...with CM9 available..the way to otther cusrom will be widened.. (like MIUI and also CM10 (I hope))
I have some question does it support a2sd/s2e? and also support ext4?
wiendyn said:
does it support a2sd/s2e? and also support ext4?
Click to expand...
Click to collapse
whatever CM9.1 support this also does... I have ported ROM from CM9.1 kernel source compiled thats all

[KERNEL] {JB-4.1.2} "ST15i" - ICEPAC v1 (For PACMAN ROM) - 20/11/2012

Hey Guys,
All credits go to an0nym0us_ & FXP team for their kernels which this one is based on.
We needed a kernel that functions like MESA but works on PAC rom.. well here it is for Xperia Mini (ST15i) ONLY.
Based on FXP142 + MESA, I call it ICEPAC.
I have tested it myself, no reboots so far, Wifi works and it makes the ROM very fast with minimal battery drain.
I am not providing any support on this and will probably never update it.
Remember you flash at your own risk!
Use the following command:
fastboot flash boot ICEPAC.img
Download here: DOWNLOAD
Check the MD5 Matches: 35DC86217864F83AA4FBEE4656880D74
pricey2009 said:
Hey Guys,
All credits go to an0nym0us_ & FXP team for their kernels which this one is based on.
We needed a kernel that functions like MESA but works on PAC rom.. well here it is for Xperia Mini (ST15i) ONLY.
Based on FXP142 + MESA, I call it ICEPAC.
I have tested it myself, no reboots so far, Wifi works and it makes the ROM very fast with minimal battery drain.
I am not providing any support on this and will probably never update it.
Remember you flash at your own risk!
Use the following command:
fastboot flash boot ICEPAC.img
Download here: DOWNLOAD
Click to expand...
Click to collapse
Hey great man
Can you make it for all four devices??
Sent from my SK17i using xda app-developers app
Maybe later on dude I did this last night only just got round to uploading it..
If someone could send me the links for CM10 FXP142 kernels for the other three devices I will create them.
As I say in the OP I will not be maintaining it though.. someone else can work on it if they wish.
pricey2009 said:
Maybe later on dude I did this last night only just got round to uploading it..
If someone could send me the links for CM10 FXP142 kernels for the other three devices I will create them.
As I say in the OP I will not be maintaining it though.. someone else can work on it if they wish.
Click to expand...
Click to collapse
Do you want the PAC kernel I made previously??
It's just not booting into recovery though
Sent from my SK17i using xda app-developers app
Jst my opinion, as tis kernel is base on MESA kernel and is for PAC ROM, the u shld have named it 'MES_PAC' nt 'ICE_PAC' its nt cool, srry jst my opinion, anyway great kernel fr our PAC rom, bro can u plz make it fr other devices too.... Waiting maybe in future...
Sent from my WT19i using xda premium
xperia mini hard brick
After i flashed this kernal in pac man jb rom, my xperia mini bricked..Now..
*my phone does not turn on (though i hear a slight vibration)
*led light does not turn on
*flashtool does not detect my device
friends please help me,,, i realy need to fix this device...
If You Could Build For C.A.M.P.S+ As well is good
thanks.
Addme to PM me if you want but i am busy won't be able reply directly/immediately
ariftwister said:
After i flashed this kernal in pac man jb rom, my xperia mini bricked..Now..
*my phone does not turn on (though i hear a slight vibration)
*led light does not turn on
*flashtool does not detect my device
friends please help me,,, i realy need to fix this device...
Click to expand...
Click to collapse
Just find a working kernel and flash it, if flashtool still doesnt detect your device, install drivers for your device.
ariftwister said:
After i flashed this kernal in pac man jb rom, my xperia mini bricked..Now..
*my phone does not turn on (though i hear a slight vibration)
*led light does not turn on
*flashtool does not detect my device
friends please help me,,, i realy need to fix this device...
Click to expand...
Click to collapse
Please try to download the kernel again and flash again, you must of had a bad flash or something.
As I say I have tested this myself and it was working fine for me on ST15i..
Hi, here is link for mini pro and lww's FXP142 kernel. Hope to see mesa working on them with PAC soon
forum.xda-developers.com/showpost.php?p=33051895&postcount=535
forum.xda-developers.com/showpost.php?p=33082839&postcount=565
Sent from my Xperia Mini Pro using xda app-developers app
will this work with the CAMPS Rom? because i am having reboots on video playback with the FXP Kernel (i think it is really a kernel issue)
Yes it does work with C.A.M.P.S
It may still reboot on YouTube as it still is partly FXP142 kernel..
Sent from my SGSIII using xda app-developers app
thanks...but for video playback? thanks dude
EDIT:
1. video playback --> WORKING (tested on 2x 2min videos)
2. Wifi --> WORKING
3. youtube --> not yet tested
Allen Hu said:
Hey great man
Can you make it for all four devices??
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
any chance of a mirror, wikisend makes me download wma files
is it working in camps rom???? I need this kernel...link given in first post is not working...can u able to upload it??
---------- Post added at 11:59 PM ---------- Previous post was at 11:41 PM ----------
can u update the link??? its not working bro!! its says link has expired
chacho_2me said:
thanks...but for video playback? thanks dude
EDIT:
1. video playback --> WORKING (tested on 2x 2min videos)
2. Wifi --> WORKING
3. youtube --> not yet tested
Click to expand...
Click to collapse
Hey plz post the kernel here!! the given link is not working...i m also using FXP...i need this kernel..
Waiting for next release.I have a feeling that development of P.A.C. ROM has been left.
@pricey will u please update the link....current link is not working!!!! OR anyone downloaded the file means plz upload here!!
shadik555 said:
Waiting for next release.I have a feeling that development of P.A.C. ROM has been left.
Click to expand...
Click to collapse
Nope it's just because I'm busy now so I have no time to update to alpha 18...
Plus szl has to finish a stable jellybean 4.2 then he'll update to 19...
Sent from my SK17i using Tapatalk 2
I have made a rebased version of pacrom based on the latest CM10 extended rom..
I have no major bugs whatsoever now and may upload it if allenhu is happy for me to do so..
As for this kernel my laptop died and it is gone with it.. I'm not going to create it again as there are better kernels out there now.
Sent using xda app-developers app

[Request] XperiaU CM7 Kernel Build

Hello all XDA Xperia Dev as you see in tittle i request for any kernel dev to make CM7 compatible kernel here is complet guide for it Building_Kernel_from_source
I have tested but have many error with python and also my old PC don't wont help me IN XU forum we have many rom but no 1 are CM7 thanks for all and you are welcome to make best experiance for ur device thank you :good::good::good:
Okies I like this initiative
And we can get a stable cm7.2 in no time coz all required sources are available
Why do you want cm7?
Sent from my Xperia Sola using xda app-developers app
IE-coRe said:
Why do you want cm7?
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
maybe it is very stable, not like ics
Sent from my 永遠に渡辺 via xda-premium
I would use cm7.2 if I get it
I always prefer gb
And that too wid cm
Like icing on cake
Quick question (I'm seriously a noob). Does cm 7.2 support the illumination band for xu? Also o had heard cm had camera problems. Are they offset by using other camera apps?
Sent from my ST25i using xda app-developers app
The_0bserver said:
Quick question (I'm seriously a noob). Does cm 7.2 support the illumination band for xu? Also o had heard cm had camera problems. Are they offset by using other camera apps?
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Yes it will support
Coz led bar is nothing bt button backlight
Camera is fine on cm
The_0bserver said:
Quick question (I'm seriously a noob). Does cm 7.2 support the illumination band for xu? Also o had heard cm had camera problems. Are they offset by using other camera apps?
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
our device is out with 2.3.7 android system is CM7 if you change kernel for support CyanogenMod lib and remove all smec apps you can make very stable CM7 with fully foncion and The Rom have only 85 or 100 MegaBytes now look what diferance for effect like ICS is also present on GB rom is caled ( transition effect and lockscreen call and theme is present on GB you can done look like ICS on GB with smouth ROM and batterie life .
my question is for what NO ? user are free to install any system on him device ICS or GB or JB it is a matter of taste
spawk said:
our device is out with 2.3.7 android system is CM7 if you change kernel for support CyanogenMod lib and remove all smec apps you can make very stable CM7 with fully foncion and The Rom have only 85 or 100 MegaBytes now look what diferance for effect like ICS is also present on GB rom is caled ( transition effect and lockscreen call and theme is present on GB you can done look like ICS on GB with smouth ROM and batterie life .
my question is for what NO ? user are free to install any system on him device ICS or GB or JB it is a matter of taste
Click to expand...
Click to collapse
Spawk plz make cm7 for xu
I would b first to install that
drsanket_xperia_u said:
Spawk plz make cm7 for xu
I would b first to install that
Click to expand...
Click to collapse
probably i begin this night or tomorow but need some help need kernel for Cm7 now i try to reinstall all my phyton and git bash if succeful i can sync with source and make it with just folowing steep in 1st thread if not need One kernel devloper to make this kernel and share it with us
spawk said:
probably i begin this night or tomorow but need some help need kernel for Cm7 now i try to reinstall all my phyton and git bash if succeful i can sync with source and make it with just folowing steep in 1st thread if not need One kernel devloper to make this kernel and share it with us
Click to expand...
Click to collapse
Fxp is too busy to help ( pm them.. They have working kernels for cm7 )
U can ask munjeni (xgo)
Atis (xgo)
Keiran
Thebrainkafka (xu )
Nickoltus ( xperia p)
Deepunknown (xperia p)
These names bcoz i have seen them developing kernels
Sent from my GT-N7000 using Tapatalk 2
Rom is builded but with out Kernel i try this night downgrading to GB and install sspeed kernel and install ROM if booted in make thread with download link
spawk said:
Rom is builded but with out Kernel i try this night downgrading to GB and install sspeed kernel and install ROM if booted in make thread with download link
Click to expand...
Click to collapse
That's a very fast progress
Superb
Keep it up
Hope it gets booted
Just a querry
Is it stable? Everything working?
drsanket_xperia_u said:
How did u got a cm7 for xu?? U made it??
Click to expand...
Click to collapse
ported but is mix aosp + cm7
I dont know if work I test it tonight untill my soon are sleep and if booted i made thread if not i continue when i suces made it ^^
spawk said:
I dont know if work I test it tonight untill my soon are sleep and if booted i made thread if not i continue when i suces made it ^^
Click to expand...
Click to collapse
Please make it possible for locked bootloader to.
spawk said:
I dont know if work I test it tonight untill my soon are sleep and if booted i made thread if not i continue when i suces made it ^^
Click to expand...
Click to collapse
I wish for the success
And a superb initiative
Cm + gb = performance wid battery
ready to test
Hope someone build the kernel you want.. cuz cm7 based custom roms will be mych better for our xperia u i think..
gb mean is more free ram faster and longer battery life..
From which device will you port cm7?

[DEV]Porting stock 4.1.2 rom(for all 2011)

So almost all 2012 xperais get jb,we get taste of aosp jb ,but we all know all thing work beter on stock,also stock have beter ui....
XPERIA S LEAK FW
XPERIA J OFFICAL FW
XPERIA P OFFICAL FW
XPERIA GO OFFICAL FW
so those phone have relased jb,im hope someone also wanna same thing (to get Stock sony jb 4.1.2)
we get 3.0.8 kernel and soon we will get 3.4 kernel ....i think is posibole to port that rom,i will try someting over weakend
everyone are welcome :highfive:
Semc Debrand Engine is @Achotjan project , he port thones of stock rom over Cyanogen(mod)
I talked with @emwno and he tell me i need those thing to get rom booted only.
boot.img
bin/vold
bin/sdcard
bin/rild
framework-res.apk/res/xml/storage_list.xml
lib/hw
lib/egl
etc/vold.fstab
usr/
vendor/
TODO:
EDIT KERNEL-NEED HELP
EDIT ZIP TO MAKE FLASHABLE
MAKE IT BOOTING
i think its better to working with xperia go JB ROM that has same resolution as 2011 mdpi devices
but xperia go has different chipset from 2011 xperias
but there is xperia j that received JB that has similar chipset as 2011 devices :good:
sry for my bad english
only simular is xperia s , we can easyer port then form ohter phone,but drwable hdpi and some layouting we can use from go and p
Is it also possible to port libs (especially camera libs)? It would be very interesting and useful.
i fist need to make it booting then will try to mix libs
n1kolaa said:
only simular is xperia s , we can easyer port then form ohter phone,but drwable hdpi and some layouting we can use from go and p
Click to expand...
Click to collapse
oh i thought xperia s chipset is novathour
my mistake
n1kolaa said:
i fist need to make it booting then will try to mix libs
Click to expand...
Click to collapse
i can be a tester if you want for coconut (LWW) :good:
not able to boot it using http://forum.xda-developers.com/showthread.php?t=2245786 Guide by Galaxy User And got it boot Still Many things Not Working..!
will start working again after updating my rom
Im starde to work on my ui with is based on cm10 and i will add a lot of thing from sony
....but it will be only compile by me for anzu...im not shure for others coz i have limited space on my main pc....
Sent from my Xperia Arc S using xda app-developers app
officiallysonyrebel said:
not able to boot it using http://forum.xda-developers.com/showthread.php?t=2245786 Guide by Galaxy User And got it boot Still Many things Not Working..!
will start working again after updating my rom
Click to expand...
Click to collapse
What kernel did you used after porting?
did you done any modifications to the kernel's ramdisk?
How about for using xperia e jellybean system file?because it had same screen resolution,chipset and others:silly:
zqchin74 said:
How about for using xperia e jellybean system file?because it had same screen resolution,chipset and others:silly:
Click to expand...
Click to collapse
only resolutin same with mini/pro/lww , xperia e using s1 snapdragon ...msm7x27a
n1kolaa said:
only resolutin same with mini/pro/lww , xperia e using s1 snapdragon ...msm7x27a
Click to expand...
Click to collapse
So..can we port with different chipset?
zqchin74 said:
So..can we port with different chipset?
Click to expand...
Click to collapse
No i think
the most similar chipset is chipset of xperia s (MSM8260 Snapdragon)
xperia 2011 devices have MSM8255 Snapdragon except PLAY
yamin8000 said:
No i think
the most similar chipset is chipset of xperia s (MSM8260 Snapdragon)
xperia 2011 devices have MSM8255 Snapdragon except PLAY
Click to expand...
Click to collapse
yes you can look into dump its almost same system as our, xperia 2011 devices have MSM8255 Snapdragon ,too PLAY
only board difrents beatven other 2011 xperias and play
Development
Guys, like seriously, there is no actual development here!
What are you discussing here is obvious which is also meaningless.
It is just my opinion and I hope to see some work here.
Respect to all the developers.
Mysteryagr said:
Guys, like seriously, there is no actual development here!
What are you discussing here is obvious which is also meaningless.
It is just my opinion and I hope to see some work here.
Respect to all the developers.
Click to expand...
Click to collapse
you here for eta you are now asking for it,i hope i will done it soon...its not easy developing on closed sources
n1kolaa said:
you here for eta you are now asking for it,i hope i will done it soon...its not easy developing on closed sources
Click to expand...
Click to collapse
No, I'm sorry I'm not asking for eta.
Btw I pm munjeni who is porting for Xperia go and he said he can't help due to time.
But we may try to ask him for some tips if the development started
The xperia u and sola,were been ported jellybean from xperia go and p, it is very nice:silly:
Mysteryagr said:
No, I'm sorry I'm not asking for eta.
Btw I pm munjeni who is porting for Xperia go and he said he can't help due to time.
But we may try to ask him for some tips if the development started
Click to expand...
Click to collapse
for what phone? i will try go to use as base or xperia s or eaven xperia j and then update to nxt
im out off free time
i will be free to try it for 2 or 3 weaks ...i need to make it bootabe ,its core Thing when you porting , you cant fix bugs without fullybootable phone.

Categories

Resources