Related
Please Help ;(
i want to connect a PS3 controller to my Prime
i have done the setup (MAC adress)
now i want to Pair it but it says i shoud to tipp the CODE ( 6776) on the controller to Pair ??
wehn i Push the PS3 Button the controller Light are blink (all 4) , some second s later nothing Blink ;(
i have installed de Sixaxis Controller app , but it doesent works ;(
i start Sixaxis and give Root , then the Controller connectet ( Client Connected : 1 ) all lights Blink
some seconds later nothing Blink and ( Client Disconnected : 1 )
only a single light should be lit , but NOTHING lights ;(
i have RESET the Controller but its like before ;(
must i put it in the Dock ?
THANKS FOR ALL
any idear ?
This is the Controller
http://www.ebay.de/itm/160736356269?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Pls Help
Here is what I did:
1. Installed the Sixaxis Controller app, opened it, and found the local bluetooth adress on the bottom-left of the screen.
2. Downloaded and installed Motionjoy Gamepad Tool on my computer.
3. Connected my ps3 controller to my computer using USB, and clicked "BluetoothPair", then "Custom MAC" on Motionjoy.
4. Entered my prime's bluetooth adress, and clicked "Pair Now".
5. Removed the usb cable and went back to my prime and changed input method to "Sixaxis Controller".
6. Clicked "start" and waited for it to say "Successfully Configered Bluetooth" on the sixaxis app.
7. Pressed the home botton on my ps3 controller and voila, it's connected!
kidio007 said:
Here is what I did:
1. Installed the Sixaxis Controller app, opened it, and found the local bluetooth adress on the bottom-left of the screen.
2. Downloaded and installed Motionjoy Gamepad Tool on my computer.
3. Connected my ps3 controller to my computer using USB, and clicked "BluetoothPair", then "Custom MAC" on Motionjoy.
4. Entered my prime's bluetooth adress, and clicked "Pair Now".
5. Removed the usb cable and went back to my prime and changed input method to "Sixaxis Controller".
6. Clicked "start" and waited for it to say "Successfully Configered Bluetooth" on the sixaxis app.
7. Pressed the home botton on my ps3 controller and voila, it's connected!
Click to expand...
Click to collapse
THANKS a lot ,
but it doesn´t work for me ;(
i have done all from your HOW TO , but ...
i start Sixaxis , then the Controller connectet ( Client Connected : 1 ) all lights Blink
BUT some seconds later nothing Blink and ( Client Disconnected : 1 )
PLEASE HELP
Ok. When you connect the ps3 controller to the computer and open Motionjoy and click BluetoothPair, does it say "Have paired to:" then the bluetooth adress next to it? Since it does say "Client Connected" once, then I think you got the setup right though.
Did you try to connect the ps3 controller to the prime using USB and pressing the home botton? Are you able to use the controller with USB? If that works, then I would try sixaxis again and make sure wifi is turned off. If it still disconnects, then I would try connecting another bluetooth device to the prime, to check if that is the problem. Also, if you haven't, try to reboot. If it still doesn't work, then you might have to use the USB cable.
kidio007 said:
Ok. When you connect the ps3 controller to the computer and open Motionjoy and click BluetoothPair, does it say "Have paired to:" then the bluetooth adress next to it? Since it does say "Client Connected" once, then I think you got the setup right though.
Did you try to connect the ps3 controller to the prime using USB and pressing the home botton? Are you able to use the controller with USB? If that works, then I would try sixaxis again and make sure wifi is turned off. If it still disconnects, then I would try connecting another bluetooth device to the prime, to check if that is the problem. Also, if you haven't, try to reboot. If it still doesn't work, then you might have to use the USB cable.
Click to expand...
Click to collapse
Thanks one more time for your Help ,
"Have paired to:" NOTHING ?! ( see at the PIC please )
i connect it with the cable and press "Pair Controller" in the Sixaxis app
Sixaxis says =
Listening for Controllers.....
Master address updated
now when i Press my PS3 Button the Transformer goes to the HomeScreen ?
FIRST W-lan is not on ........
okay now i have install the Driver it connect toMotioninJoy and i have PAIR it to the Adress , but now when i start Sixaxis , it "Listening for Controllers ....."
i press the "P3 " button - the controller lights all 4 Blinks and....
Nothing (Sixaxis) Listening for Controllers .....
and the Controller s lights STOP blink ;(
EDIT 1:
okay i don´t now what i done but now the Sixaxis APP says one more time
Client connected: 1 ( The PS3 controllers lights are Blinking all 4 ! )
some seconds later ....
Client disconected : 1 ( The PS3 Controllers Lights are NOT blink )
THE CONTROLLER PS3 is not ORIGINAL , do you think thats the Problem ?
some one how can help PLS ?
WTF ;( ?
Try this and tell me if it works:
1. Plug controller in with USB port connected.
2. Play around with it to make sure it works for a bit.
3. Push the Playstation button and unplug it from the USB at the same time.
Weird, but it works for me, lol.
If you bought a cheap ps3 controller off ebay it might be the problem, yes. It should be super easy you see, so there might be something wrong with the controller. I'm assuming you don't have the dock, so you are not able to test if it works on the prime using usb?
When you are pairing it, this is how it should look like:
I don't have Sixaxis installed, it's unrooted, and it works fine with bluetooth. I don't know why you're going through the trouble of using Sixaxis at all.
Ov3rbyte said:
Try this and tell me if it works:
1. Plug controller in with USB port connected.
2. Play around with it to make sure it works for a bit.
3. Push the Playstation button and unplug it from the USB at the same time.
Weird, but it works for me, lol.
Click to expand...
Click to collapse
That actually worked lol, what the? xD Halljo, try this! Bluetooth has to be on of course.
Try it without bluetooth on too and tell me if it works please Kidio007.
Ov3rbyte said:
Try it without bluetooth on too and tell me if it works please Kidio007.
Click to expand...
Click to collapse
Tried 7 times, doesn't work for me when I turn off bluetooth. If it works for some with it off, then it's just a glitch probably.
I'm guessing it's a glitch, they fixed it in the update that I got I bet. Now it shows up in the actual bluetooth controllers in bluetooth settings, Woot! It caused reboots and i'm sure it was linked to that.
You conecct it without an app? If i want to pair manual it dont works .i have to do any settings in sixaxis ? Profil or anything?
Gesendet von meinem GT-I9100 mit Tapatalk
ok, first i had to wat da hell?
The knockoff PS3 controllers like the one you got from ebay DO NOT WORK. i learned that the hard way too. Something with how they authenticate, it works for a PS3 but barely, i can connect it to my computer and use it as a controller for that, but for sixaxis controller on my tablet, no way.
Spend the money, buy a real controller. Used game places, pawn shops, i found one with the old packaging at my local TheSource store (TheSource.ca) for like, 15% off. I bought it, it works awesome.
As far as apps go, sixaxis controller is the way to go. Pay the couple of bucks, its worth it. Actively updated, new features seemingly every other week. just do it. you wont be sorry.
As far as getting the controller to connect:
Get this app:
https://market.android.com/details?id=com.dancingpixelstudios.sixaxiscontroller&hl=en
Go to here and download the sixaxis pair tool:
http://www.dancingpixelstudios.com/sixaxiscontroller/tool.html
Other apps can do the same thing, i have used the one in the screenshots previous, however it reverses the mac address. Just use the one i linked, it works with no hassle.
Plug in sixaxis controller to your computer, use the tool to change the mac address.
Start the app on your tablet, it will turn off bluetooth if its on so no need to worry about that. start your sixaxis controller, it should connect pretty much no problem (as long as its genuine, if its a knockoff good luck)
The latest version of the app has a USB pair ability, you can connect your controller via USB and that, for whatever reason, worked on my knockoff controller. weird.
Hope this helps, i know its not the news your looking for. As of yet i cant find anything to get my cheap controller connected, aparently it uses nonstandard meathods for connecting to the PS3 so theres no definate way to make it work 100%.
Thanks for that i buy one and test it later.
I have to change the controller settings game by game ? Also for GTA one and other for shadowgun? Do you can send me your settings if i need it.
Thanks guys for your help
Gesendet von meinem GT-I9100 mit Tapatalk
One more problem is that when i change the input method to sixaxis and change back to hackers keyboard . The keyboard DON'T shows up
I have to restart the prime and sometimes it helps
Gesendet von meinem GT-I9100 mit Tapatalk
the trick of pushing the ps button and unplugging works for me too (without bluetooth on)
i have not turned bluetooth once since i got my prime and this little glitch works for me, and im not rooted
with the orginall PS3 controller works \fine jihaaaaa
but not vibrat. can i change that
So I have the prime and a ps3 controller and i changed the controller mac address to the primes and i can get it to connect using the sixaxis app but when i open up and emulator and try to configure the controls it registers one of the joysticks and the dpad as the same and wont even register the other joystick, did i do something wrong? also USB/BT Joystick Center wont even detect the controller, and I dont have the usb adapter or keyboard. It sees the right joystick and dpad as the same and wont detect the left analog stick movement besides pressing L3
scottrod said:
So I have the prime and a ps3 controller and i changed the controller mac address to the primes and i can get it to connect using the sixaxis app but when i open up and emulator and try to configure the controls it registers one of the joysticks and the dpad as the same and wont even register the other joystick, did i do something wrong? also USB/BT Joystick Center wont even detect the controller, and I dont have the usb adapter or keyboard. It sees the right joystick and dpad as the same and wont detect the left analog stick movement besides pressing L3
Click to expand...
Click to collapse
Just to let you know the ps3 controller works on the prime without any root or sixaxis app. Just turn on BT on the prime, plug in the ps3 controller through usb port and turn on the Ps3 controller. Wait a few secs so it can pair, unplug and your up and running without any cables. Been using mine with bluetooth without any problems.
hungrybear said:
Just to let you know the ps3 controller works on the prime without any root or sixaxis app. Just turn on BT on the prime, plug in the ps3 controller through usb port and turn on the Ps3 controller. Wait a few secs so it can pair, unplug and your up and running without any cables. Been using mine with bluetooth without any problems.
Click to expand...
Click to collapse
I don't have the usb adapter :/
bump still got no solution without USB adapter!
In your emulators settings (I use nesoid, snesoid etc) did you go into Other Settings> and check "Use Input Method" ? It says enable special input device eg bluetooth gamepad.
I have the same issue and I have the paid version and after. 21 update it doesn't work which really pisses me off... .21 update worst update so far? Fair to say?
http://www.amazon.com/USB-Gender-Changer-Female-To/dp/B000BSN4UY
Would this solve your problem? I haven't gotten mine yet but for that price it's worth a shot with the stock USB cable. I have the dock so my PS3 controller plugged right up.
no its been proven that that wont work, the usb charging cable doesnt have the correct pins for usb inputs, only the usb adapter does
scottrod said:
no its been proven that that wont work, the usb charging cable doesnt have the correct pins for usb inputs, only the usb adapter does
Click to expand...
Click to collapse
;(
I wasted a whole $1.15!
NeoMagus said:
In your emulators settings (I use nesoid, snesoid etc) did you go into Other Settings> and check "Use Input Method" ? It says enable special input device eg bluetooth gamepad.
Click to expand...
Click to collapse
scottrod, did you check this setting?
Can someone tell me how can I do that ? Should I apply some settings in Sixaxis or Joystick Center ?
You just have to plug it in through USB OTG and you're good to go.
Afaik you'll need an app for the Bluetooth connection tough.
d4fseeker said:
You just have to plug it in through USB OTG and you're good to go.
Afaik you'll need an app for the Bluetooth connection tough.
Click to expand...
Click to collapse
Oh no, I can't find a OGT cable
Android Is ReadyTo Play. said:
Oh no, I can't find a OGT cable
Click to expand...
Click to collapse
Search amazon. Found one for a few bucks. Waiting to get it and see how it works
Sent from my SPH-L710 using xda premium
In Sixaxis App just plug in through USB and hit Pair, and USB/BT App plug a BT dongle into OTG and hit search to get dongle's address then plug controller in through USB to pair then unplug and hit search and should find controller over BT.
Michael_P said:
In Sixaxis App just plug in through USB and hit Pair, and USB/BT App plug a BT dongle into OTG and hit search to get dongle's address then plug controller in through USB to pair then unplug and hit search and should find controller over BT.
Click to expand...
Click to collapse
Sorry to hi-jack the thread but do you still need to be rooted to use sixaxis app on the GS3?
I only ask as my stock TF101 works flawlessly with a PS3 controller over BT after pairing via a USB cable - no root required! Is that a general ICS thing or just a TF101 thing?
Sent from my GT-I9300 using Tapatalk 2
SunjinSak said:
Sorry to hi-jack the thread but do you still need to be rooted to use sixaxis app on the GS3?
I only ask as my stock TF101 works flawlessly with a PS3 controller over BT after pairing via a USB cable - no root required! Is that a general ICS thing or just a TF101 thing?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
You do need to be rooted.
barlerer said:
You do need to be rooted.
Click to expand...
Click to collapse
Damn! Thanks.
Sent from my GT-I9300 using Tapatalk 2
Oh I have root. So I don't need to use Sixaxis, right ?
Android Is ReadyTo Play. said:
Oh I have root. So I don't need to use Sixaxis, right ?
Click to expand...
Click to collapse
If you want to play wirelessly yes you do.
Michael_P said:
If you want to play wirelessly yes you do.
Click to expand...
Click to collapse
No, I don't want wireless. I can play with cable. So, don't need right ?
Hey guys. Today I bought OTG cable. I tried play Nova 3 with Ps3 controller. ( I didn't do anything. I just used cable. I can control homescreen, apps. But I can't play Nova 3.
help guys Now I have cable but still I can't play some games.
Only some games have built in support for controllers. NOVA doesn't, but if you get Sixaxis Controller you set-up touch profiles so different keys will emulate motions on the screen, that's how you can do it.
Also, only certain devices support PS3 syncing via BT without an app, my Sony Tablet S has built in support, you plug it in, turn bluetooth on and it's synced via BT, but the GS3 doesn't, so if you want to play without the OTG cable, get Sixaxis controller.
Nooo, I want play with OTG cable. How can I use Sixaxis Controller with OTG cable ? Or, Should I try Joystick Center app ?
By using sixaxis controller you'll be able to create profiles for all games , even nova 3 k:
Android Is ReadyTo Play. said:
Nooo, I want play with OTG cable. How can I use Sixaxis Controller with OTG cable ? Or, Should I try Joystick Center app ?
Click to expand...
Click to collapse
Umm, well I'm pretty sure you can keep it connected if you want? Not sure why you would since if you have OTG cable you can use it wirelessly?
Android Is ReadyTo Play. said:
Nooo, I want play with OTG cable. How can I use Sixaxis Controller with OTG cable ? Or, Should I try Joystick Center app ?
Click to expand...
Click to collapse
USB/BT controller (I think the app you're referring to) also has Touch Emulation via a plugin (it requires Root just like Sixaxis Controller does though for touch emulation), but as others are saying, why would you want to do that when you can do it wirelessly? Wireless connection affords you the advantage of being able to also connect to MHL and your HDTV...
Anyways, more information here:
I can't do Sixaxis. I think USB/BT Joystick Center is easier than Sixaxis. But I can't find Ps3 controller buttons in Button mapping.
Android Is ReadyTo Play. said:
I can't do Sixaxis. I think USB/BT Joystick Center is easier than Sixaxis. But I can't find Ps3 controller buttons in Button mapping.
Click to expand...
Click to collapse
Why can't you do Sixaxis? It is definitely easier than USB/BT - the video above has a guide for a Nova 3 touch emulation and Sixaxis pairing and the blog has a touch emulation profile you can just download and start using!
So I bought a cheap OTG cable off amazon to connect my ps3 controller to my phone. I followed all Dancing Pixel Studios' instructions and I can use my controller while its plugged in, but it won't pair through bluetooth. When I press start it connects to the controller, but after it connects I try to click pair controller and it says "No controller found - please connect it via USB cable. The cable I bought is kind of janky, it only works when I position the cable just right. I don't think the cable is the problem because I get it to connect and I keep the cable in the exact same position and click pair and still nothing. I even tried pairing it in the bluetooth menu but it just keeps pairing and pairing, and nothing happens. BTW, I am on the latest cm9 build from gray wolf with little to no issues. Any help would be awesome!!!
uo959 said:
So I bought a cheap OTG cable off amazon to connect my ps3 controller to my phone. I followed all Dancing Pixel Studios' instructions and I can use my controller while its plugged in, but it won't pair through bluetooth. When I press start it connects to the controller, but after it connects I try to click pair controller and it says "No controller found - please connect it via USB cable. The cable I bought is kind of janky, it only works when I position the cable just right. I don't think the cable is the problem because I get it to connect and I keep the cable in the exact same position and click pair and still nothing. I even tried pairing it in the bluetooth menu but it just keeps pairing and pairing, and nothing happens. BTW, I am on the latest cm9 build from gray wolf with little to no issues. Any help would be awesome!!!
Click to expand...
Click to collapse
I've been using my PS3 controller with a Nexus 7 so it should work pretty much the same. To get it to pair through bluetooth, you must go to the dancing pixel website and download a little exe called something along the lines of bluetooth address changer or something like that. This will let you change the bluetooth address of the controller to the bluetooth address of your rezound. The controller will then pair with your phone through bluetooth. hope this helped!
zZDave_Stud said:
I've been using my PS3 controller with a Nexus 7 so it should work pretty much the same. To get it to pair through bluetooth, you must go to the dancing pixel website and download a little exe called something along the lines of bluetooth address changer or something like that. This will let you change the bluetooth address of the controller to the bluetooth address of your rezound. The controller will then pair with your phone through bluetooth. hope this helped!
Click to expand...
Click to collapse
I did this already. SixaxisPairTool is what it is called.
uo959 said:
I did this already. SixaxisPairTool is what it is called.
Click to expand...
Click to collapse
If it's still not pairing I would make sure that the bluetooth address of the controller matches the one of your rezound because that happened to me the first time I tried to pair it with my nexus 7.
zZDave_Stud said:
If it's still not pairing I would make sure that the bluetooth address of the controller matches the one of your rezound because that happened to me the first time I tried to pair it with my nexus 7.
Click to expand...
Click to collapse
Yep, just double checked it and it is exactly the same... this is annoying. I appreciate your help thus far though.
update: I just connected my controller to my phone, opened sixaxis app and pressed Start and it found the controller right away, so I pressed Change IME and chose ps3 controller and I used the d-pad and square to choose pair controller and click pair. It still said no controller found. Bahahaha!!!!
uo959 said:
Yep, just double checked it and it is exactly the same... this is annoying. I appreciate your help thus far though.
update: I just connected my controller to my phone, opened sixaxis app and pressed Start and it found the controller right away, so I pressed Change IME and chose ps3 controller and I used the d-pad and square to choose pair controller and click pair. It still said no controller found. Bahahaha!!!!
Click to expand...
Click to collapse
Hahaha nice, a faulty app! Glad I could help
If I remember right it's a Bluetooth stack/ Bluetooth driver issue on the
Rezound and other Sense phones. I believe there are some Non-Sense Roms that have the correct Stack/driver that will fix the issue but I can't remember which ones they are sorry. Also have you tried Wii remote? That works for me even on Sense Roms.
Sent from my Sense 4 ICS Rezound
LakerStar25 said:
If I remember right it's a Bluetooth stack/ Bluetooth driver issue on the
Rezound and other Sense phones. I believe there are some Non-Sense Roms that have the correct Stack/driver that will fix the issue but I can't remember which ones they are sorry. Also have you tried Wii remote? That works for me even on Sense Roms.
Sent from my Sense 4 ICS Rezound
Click to expand...
Click to collapse
You are correct, the only way to pair a ps3 controller on an HTC device, is to be rooted, and have an aosp, or an aokp Rom on ur phone. That's it. Plus.... You need to have an OEM ps3 controller. Any cheapo controller won't work
Sent from my ADR6425LVW using xda app-developers app
Sent from my GT-P3113 using xda app-developers app
You need root for this.
Install sis axis of controller from playstore. After that use an otg cable to connect ur ps3 controller to ur tablet using the supplied ps3 cable. Power up ur ps3 controller. Open sisaxis controller and press pair controller. Ur bluetooth mac address will be seen at the bottom. Add that to the empty field.
Change IME to sis axis controller. Then press start. You can remove the cable now. Ur controller is now paired. Next time u don't have to repair ur again. Just have to open sisaxis controller app, press start and turn on ur ps3 controller.
Sent from my GT-N7100 using Tapatalk 2