[Q] (Q) need help..my phone stuck in samsung logo (ARHD v19) - Galaxy S III Q&A, Help & Troubleshooting

can anyone help me/ suggest to me what i should do...
I'm on Android Revolution HD v18.. and today i flash v19, 1st without wipe.. successful.. then its stuck at samsung logo...
i tried flashing it with full wipe, wipe calche, still the same happened, stuck at samsung logo...

Try a different custom rom. Or redownload the rom you're trying to flash and see of that makes any difference
Sent from my GT-I9300 using xda premium

Wiping
Most cases Full Wipe is enogh if stuck on Loop then Wipe cache, if that's also does not work Wipe Dalvik cache maybe will help. If nothing works redownload the Rom and try again (this is only if you really really want this rom ) But if all of this doesn't work either the Rom is crappy or in some way not compatible with your device. --> Go restore your Backup ( KIDS ALWAYS USE PROTECTION :highfive: (in this case PROTECTION = BACKUP )

Related

[Q] How to restore Boot Logo?

Hi,
I just flash the Rom Batista70 3.6, after flashed, I found that it is not the ROM I want, so I flashed my S2 to other ROM. However, The boot logo have been changed to "Batista70" and I am unable to restore it to original one, can someone show me how can I change the bootup logo back to the original?
Ir you flashed vía cwm then you will have a copy of the old Rom on your internal SD card.wipe it.then do a full wipe again and factory reset from recovery and re-install the new Rom.once done don't forget to wipe stats.
Do a full wipe before doing anything (flashing ROM, restoring backup and so on), and trust me, you will forget half of problems that you're experiencing now. I always see here people complaining here on that or that and most of these problems can be solved by doing full wipe (cache, data, system, Dalvik cache)
I already wipe everything before flash MIUI1.8.12, seems the previous rom replace default logo files that other roms seldom replace
Sent from my GT-I9100 using XDA App
andylcm said:
I already wipe everything before flash MIUI1.8.12, seems the previous rom replace default logo files that other roms seldom replace
Click to expand...
Click to collapse
Have you tried to re-flash kernel?
Thx. I just try to refresh kernel, the orginal logo with yellow triangle come back. But when I use my jib to reset refresh count, the modified logo come again, any ideas?
Sent from my GT-I9100 using XDA App
Have you wiped phone as instructed and flashed a full stock rom . If not do that .
jje

Cant flash custom rom

Hey,
I cannot install any custom rom on my phone even after rooting and installin cwm.I followed all the instructions to the T and still i always end up goin right upto the select language screen before it goes off or im stuck at the android logo.Please give me a solution as i am desperate to try a custom rom.Btw i tried installin over DDKQ5,DDKQ6 & XXKPH.Cannot install Cyanogenmod,my-ui or even sonygenmod.
Thanks so much
Im on kph & hv flashed all d above roms on my fone.
Sent from my GT-S5830 using xda premium
hey stuck on boot logo there are many questions like this ok consegregate........
now the answer before flashing any rom wipe factory resets ,wipe card partitions and wipe delvik cache using cwm and also keep your battery full .i installed cm7 rc1 by grif with this method.
and also use roms build for ace only hahahaha
Where's your phone from?
I had some problems flashing some roms for S5830 since mine is S5830B.
before installing any custom rom in recovery do a factory reset then wipe cache partiton and dalvik cache then flash the rom
My phones from India.I did do all the wipes and resets.Even tried flashing with sys and data mounted.Tried even after formatting system and data.But nothing works.The only rom which i successfully flashed through cwm is ginger real 1.4.
zane05 said:
My phones from India.I did do all the wipes and resets.Even tried flashing with sys and data mounted.Tried even after formatting system and data.But nothing works.The only rom which i successfully flashed through cwm is ginger real 1.4.
Click to expand...
Click to collapse
U said u wer not able to install cyanogenmod, right? Even my fone is frm india & i've tried many roms without any problems. Can u tell me in detail hw u tried to install cyanogenmod and on which firmware u tried it on? Maybe i can help u more.
Sent from my GT-S5830
I tried on ddkq5,ddkq6 and kph.I had grif's cyanogenmod on my sd.wiped cache ,dalvik cache and factory reseted the phone.Mounted the sys and data.Then installed the zip file.after this it boots till the select language screen and then goes off.if i restart it the same thing happens.Tried factory reseting and wiping caches even after flashing but it does not help.Facing the same problem for MY-UI as well as gingercruzt.I even tried format the system before flashing.Tried with cwm v4 as well as v5.

Can't boot Galaxy s3 after flashing Omega v9.1 rom

It's stuck on the galaxy s3 logo screen. I have to restore back to omega v9. I have tried wiping partition etc but it still doesnt work. Help me please!
steps and u have. gt i9300? or other one?
Sent from my GT-I9300 using xda premium
1. Downloaded v9.1
2.went to cwm recovery and wipe partition
3.Flash v9.1 through cwm recovery
4. Pressed default installation
After it reboots, it's stuck on the logo screen (Galaxy s3 logo)
I have the international version.
Try setting of the mobile and see if you can get into download mode
Sent from my GT-I9300 using xda app-developers app
1315wen said:
It's stuck on the galaxy s3 logo screen. I have to restore back to omega v9. I have tried wiping partition etc but it still doesnt work. Help me please!
Click to expand...
Click to collapse
Didn`t you make a nandroid backup before flashing another rom?
If so restore that, if not wipe data/factory, wipe cache and dalvik cache and reflash the omega rom.
If that doesn`t work, flash a stock rom with Odin and reroot.
This reads like the file you are flashing is faulty .
jje
omega v9.1 is no wipe then y u wipe partition?? its always better to do wip data\sytem ,wipe cache ,dalvik

Soft bricked.. I guess :s

I had ICS.. backed with titanium and upgraded to JB with Liquidsmooth's rom... however I failed to read that titanium backedup contacts couldn't restore from ICS to JB... after reinstalling Liquidsmooth I thought the error might be with the ROM so I installed Omega's JB rom... nice bootscreen... pity it stayed in a bootloop... I then reinstalled it from cwm after removing the battery (a few times) and getting into recovery.... however it remained the same...
so.. I get into odin.. PDA -> ChainFire's "CF-SGS3-CWM-v5.5-v1.5.tar" worried that all I've don'e is put a ics kernal into a JB rom... I boot into recovery and install an old (possibly original root) ROM... now it boots past the animated logo just stays on the static -Samsung- logo... I can boot into odin.. not tried to boot into recovery...
but I don't have a recovery rom... (I have searched)...
could someone point me in the right direction please
Thanks
Have you tried wiping cache and dalvik, maybe try factory reset.
If all that fails this is what I do:
Boot into recovery
Go to mounts and storage
Format cache, System, data and internal sd card. (of course you will lose all data)
Then flash a full stock firmware package through Odin.
Done
Sent from my GT-I9300 using xda app-developers app
Obagleyfreer said:
Have you tried wiping cache and dalvik, maybe try factory reset.
If all that fails this is what I do:
Boot into recovery
Go to mounts and storage
Format cache, System, data and internal sd card. (of course you will lose all data)
Then flash a full stock firmware package through Odin.
Done
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I found a stock 4.04 (ICS) rom... still soft bricked... I'll wipe everything except internal SD card... see if that works.. else guess I got no other option :s... I am pretty much backed up so I'm not completely fussed.. but I know there will be something that was missed...
didn't have to do a full wipe... but when I power-off it still reboots... I have to remove battery to power off?
Just do a wipe from Recovery, often the problem then not.

[Q] stuck in boot screen after installing Melting rock ROM

hmmm having hard time installing Melting rock Custom rom,
I have rootd my CHD and now tried istalling this rom, done with system format, dalvik wipe, cache wipe, data wipe,
then i flashed the rom, it said it installed sucessfuly (instaled not more thn a min)
i rebooted it but its being stuck in SAMSUNG boot logo...
can you pls help me , is thr a problem in my installation ??
perform a factory reset in recovery and flash again.
thanks for the help
neomanu said:
perform a factory reset in recovery and flash again.
Click to expand...
Click to collapse
Hi , i tried doing it manytime,
but found a sloution,
i was flashing this MR rom on 4.1.2 so it failed i guess
thn after flashin original 4.2.1 update it sucessfully installed like a cake smooth

Categories

Resources