[Q] I9100XWLS8 (4.1.2) - Spain (FOP) [23-01-12] factory reset considirations - Galaxy S II Q&A, Help & Troubleshooting

Hi,
I'm considering to install this ROM and do a factory reset in order to clean all my carrier bloatware and customizations.
I'm wondering what should I expect to get in term of used memory and system storage after the factory reset?
I'm going to backup the following before the factory reset:
1. SD storage.
2. Possible phone based contacts.
3. My carrier APN
Anything else I should be backing up?
Thanks!

TomMiken said:
Hi,
I'm considering to install this ROM and do a factory reset in order to clean all my carrier bloatware and customizations.
I'm wondering what should I expect to get in term of used memory and system storage after the factory reset?
I'm going to backup the following before the factory reset:
1. SD storage.
2. Possible phone based contacts.
3. My carrier APN
Anything else I should be backing up?
Thanks!
Click to expand...
Click to collapse
You could use Titanium Backup PRO to backup your user apps/appdata so that apps/app settings etc are restored.
No need to backup contacts as they're synced to google account and will restore when you re-enter account details.

TheATHEiST said:
You could use Titanium Backup PRO to backup your user apps/appdata so that apps/app settings etc are restored.
No need to backup contacts as they're synced to google account and will restore when you re-enter account details.
Click to expand...
Click to collapse
That requires root access, which I have in my current rom, but also for the new rom.
Is there a tested rooting method for this rom?

TomMiken said:
Is there a tested rooting method for this rom?
Click to expand...
Click to collapse
flash the Tar version of Siyah v6.0b4 (tar file for ODIN) from Pc odin to root the official JB v4.1.2 spain version
As u can see its done by the XDA member @Rosario
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Sun90 said:
flash the Tar version of Siyah v6.0b4 (tar file for ODIN) from Pc odin to root the official JB v4.1.2 spain version
As u can see its done by the XDA member @Rosario
Click to expand...
Click to collapse
Nice!
BTW, is that Siyah kernel based on the same original kernel build which comes with this rom (3.0.31-816988)?

TomMiken said:
Nice!
BTW, is that Siyah kernel based on the same original kernel build which comes with this rom (3.0.31-816988)?
Click to expand...
Click to collapse
No, that siyah kernel is not based on this Official JB4.1.2 kernel build but the earlier Leaked JB v4.1.2 for u

Sun90 said:
No, that siyah kernel is not based on this Official JB4.1.2 kernel build but the earlier Leaked JB v4.1.2 for u
Click to expand...
Click to collapse
Couldn't this mixing of this official release and a kernel from the previous leaked build be the source for some unexplained bugs?
Besides that I've read the Siyah 6.0b4 release notes and I saw that they have some known issues (like startup scripts not running).
I'm hoping to get a more stable installation than my current rooted I9100XWLPT (4.0.4) (not sure which root I've used).
So I'm looking to do things more careful with this release, so I'll get a stable running phone
I imagine that Siyah will release a new build for the official release pretty soon.
I waited until now, so I think that I'll wait a little more.
Thanks for all the info and recommendations!

Related

Unrooting

Hi,
If I follow this guide http://forum.xda-developers.com/showthread.php?t=1056334 and root my phone, is there any option to put back the stock kernel i had? because like CF says, this kernel have bugs, so maybe i'll want to put it back to stock.
Plus, what CF version should I install according to the following screen shot?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks
Yes, but the main idea is to put an official kernel and the latest is the best one (kf2). You keep your root access with a very stable kernel and if you combine with modem kf2, you will have a very good configuration.
Edit: I just looking your screen capture. You can flash again ke7 kernel once rooting process if finish. You will keep root access.
bgn9000 said:
Yes, but the main idea is to put an official kernel and the latest is the best one (kf2). You keep your root access with a very stable kernel and if you combine with modem kf2, you will have a very good configuration.
Click to expand...
Click to collapse
CF-Root-SGS2_XX_OXA_KF2-v4.0-CWM4.zip ?
Does it fit with my device? watch my original post edit
Why not using litening v1.5 ? You will have everything (latest modem, kernel) and a very good firmware with CMW 4.0 embedded.
Edit: http://forum.xda-developers.com/showthread.php?t=1095274
actually i just wanted a root, i dont want any other rom , i want minimal changes..
Ok, I misunderstood you, sorry.
You need an insecure kernel and not a chain fire kernel
Edit : http://forum.xda-developers.com/showthread.php?t=1101671
Edit2: flash an insecure ke7 one through Odin (quite same version of yours) and after reboot you need superoneclick Install on your pc. The main idea is to flash a custom kernel, do the root process and ref lash official kernel. This is the only solution.
bgn9000 said:
The main idea is to flash a custom kernel, do the root process and ref lash official kernel. This is the only solution.
Click to expand...
Click to collapse
And is this the proccess you suggested above?
Another question, will I be able to restore the device to a way which I can use my warranty if needed?
Thanks
If you have an official kernel installed, warranty should be preserved.
But odin flash counter can provide the information about this unofficial kernel flash you need to do in order to become root. To reset this counter, you need a small device called USB JIB available on ebay for 6 euros.
Thanks to this device, the yellow triangle will be removed (that warns you have an unofficial kernel) and the odin flash counter will be resetted.
So, this is why, installing custom firmware is not a big deal after that...
bgn9000 said:
If you have an official kernel installed, warranty should be preserved.
But odin flash counter can provide the information about this unofficial kernel flash you need to do in order to become root. To reset this counter, you need a small device called USB JIB available on ebay for 6 euros.
Thanks to this device, the yellow triangle will be removed (that warns you have an unofficial kernel) and the odin flash counter will be resetted.
So, this is why, installing custom firmware is not a big deal after that...
Click to expand...
Click to collapse
Thank you
[too short]

Mobile data not connecting

Hello, I searched for my problem in both Google and these forums, with no success, but I apologize if I've missed something.
I was trying to experiment with nandroid backup to try to flash another ROM. First I used ROM Manager to update to the current version of CWM, then I rebooted into recovery, made a backup, then did a factory wipe. When the phone rebooted, the mobile data did not work. It will not work no matter what I try (factory reset, restore to previous backup, install latest cm nightly). I'm hoping someone can help me. Thanks in advance. Here's my phone info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-I777 using Tapatalk 2
pendragonia said:
Hello, I searched for my problem in both Google and these forums, with no success, but I apologize if I've missed something.
I was trying to experiment with nandroid backup to try to flash another ROM. First I used ROM Manager to update to the current version of CWM, then I rebooted into recovery, made a backup, then did a factory wipe. When the phone rebooted, the mobile data did not work. It will not work no matter what I try (factory reset, restore to previous backup, install latest cm nightly). I'm hoping someone can help me. Thanks in advance. Here's my phone info:
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
1. NEVER use ROM Manger with an i777.... At this point I can't give any info on that I've never used it do some reading on that.... As far as apn setting check this thread... Any questions you have search this in google "XDA i777 (your questions)"
http://forum.xda-developers.com/showthread.php?t=1576199 apn setting
Edit: Not to confuse you CWM is safe just not flashing it with the ROM Manger app. The kernel will have CWM in it.... GL
snipe2nite said:
1. NEVER use ROM Manger with an i777.... At this point I can't give any info on that I've never used it do some reading on that.... As far as apn setting check this thread... Any questions you have search this in google "XDA i777 (your questions)"
http://forum.xda-developers.com/showthread.php?t=1576199 apn setting
Edit: Not to confuse you CWM is safe just not flashing it with the ROM Manger app. The kernel will have CWM in it.... GL
Click to expand...
Click to collapse
Unfortunately, changing the APN settings did not work. If I can't find something else online, I guess I'll flash the phone back to stock and start over with the rooting process. I do know enough to avoid galaxy2root....thanks for helping a newb who doesn't apparently retain instructions very well :fingers-crossed:
Have you tried to flash another modem? I'm not sure it would fix your issue but imo worth a shot.
I flashed the latest Siyah kernel and it seemed to do the trick. Internet's working again!
pendragonia said:
I flashed the latest Siyah kernel and it seemed to do the trick. Internet's working again!
Click to expand...
Click to collapse
Good job sorry I was gone for the day I was going to tell you to flash a new kernel... Glad you got it figured out!! :highfive:
Don't use rom manager. Reboot after installing cm or aokp to get data working.

[ROM] Jelly Bean 4.1.2 I8190XXAMA4_I8190XXAMA2 rooted only [23.02.2013]

ROM Jelly Bean 4.1.2 I8190XXAMA4_I8190XXAMA2
Uploaded new Jelly Bean 4.1.2 ROM, ONLY with latest root and updated su binaries. Rom is compatible with all European devices.
ROM INFO:
I8190XXAMA4_I8190XXAMA2
RELEASE DATE: 30.01.2013
RE-COMPILE DATE: 23.02.2013
BUILD NUMBER: JZO54K.I8190XXAMA3
KERNEL VERSION: 3.0.31 - 809600
BASEBAND VERSION: XXAMA2 [EUROPE]
ANDROID VERSION: 4.1.2
ROM STATUS: NON-WIPE
FIRMWARE STATUS AFTER FLASH: OFFICIAL
BINARY COUNT AFTER FLASH: NONE
CSC Carrier Codes:
ATO,BGL,BTU,CMF,COA,CYO.CYV,ERO,ETL,EUR,MSR,NEE,ONE,ORX,PHE,SEB,SEE,SIM,SIO,SMO,TEB,TMT,TOP,TPH,TRA, TSR,TWO,VIM,XEH,XEO. (by default base rom only supports 6 codes, now worldwide apn settings are included)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads:
androidfilehost
http://www.androidfilehost.com/?fid=9390326628153819585
How to flash:
Before flashing I urge you to backup the device and the internal sd card, just in case, this is a non wipe ROM. Also be aware that if you restore the device to default factory settings it will erase your internal card!
Shutdown device.
Put your device into Download mode is by pressing "Volume Down"+"Home"+"Power Button" and then after the menu shows, "Volume Up"
Connect device to the pc.
Unrar the downloaded package,
Launch Odin, select "PDA" and then browse and select the ROM file, press "Start"... You're done !!
After the first boot is done, i recommend a reboot.
Enjoy !! And don't forget to say thanks !!
Reserved ... :silly:
When will it be?
furuko1231 said:
When will it be?
Click to expand...
Click to collapse
still at 87% on androidfilehost... very soon now..
infected_ said:
still at 87% on androidfilehost... very soon now..
Click to expand...
Click to collapse
okay thanks
What new/different?
now how many %?
I'm wearing out my F5 button here.
My time is running out. Can you be faster?
updating first post...
very very thanks
Tanhks a lot!!! Will you release a zip for Cwm?
Any diferences between this and AMA3? Anyone know where we can get a changelog? Ty
I like a lot what you have offered to us. But what is changed, what new? Is it useless to make new rom just only updated superSU binaries.
I've tried flashing this ROM four times through Odin and it caused Windows to bluescreen on all four times.
S3miniFin said:
I like a lot what you have offered to us. But what is changed, what new? Is it useless to make new rom just only updated superSU binaries.
Click to expand...
Click to collapse
http://lmgtfy.com/?q=i8190xxama4+changelog ...
blackknightavalon said:
I've tried flashing this ROM four times through Odin and it caused Windows to bluescreen on all four times.
Click to expand...
Click to collapse
that's a problem with your windows/drivers environment... i flash rom's in w8, w7 and xp on different machines without issues...
maybe try refresh samsung drivers and use another version of Odin, just for testing...
regards,
infected_
Shineali said:
Tanhks a lot!!! Will you release a zip for Cwm?
Click to expand...
Click to collapse
No sorry. Maybe i can ask another dev to re-compile into a flash-able cwm zip... you have my permission ...
regards,
infected_
S3miniFin said:
I like a lot what you have offered to us. But what is changed, what new? Is it useless to make new rom just only updated superSU binaries.
Click to expand...
Click to collapse
infected_ said:
http://lmgtfy.com/?q=i8190xxama4+changelog ...
Click to expand...
Click to collapse
Now you talking ^^
How about a Heimdall guide?
Sent from Spaceball One.
----------------------------------------------------------------------
Never mind. Just upgraded Odin from 3.04 to 3.07 and the reboot problem is solved.

Restoring from CM to Stock ROM

I have CM10.1 installed now, but I want to go back to the stock ROM.Now, I've looked up firmwares, and there are two for macedonia: MBM, and VIM.How am I supposed to know which one am I supposed to flash?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EM2 is supposed to be newer then ELLA. Hence go with this one.
Sent from my GT-I9300 using xda app-developers app
Won't it mess up anything if it's a different CSC?Also, considering CM10.1 is android 4.2, how would you go about restoring to stock since the sdcard pathways and some others are different?I think of going this way
Go to download mode, flash stock ROM, go to recovery, wipe user data and cache, and try to start the phone now.Is this good?
Format data sdcard system cache and preload ,then install stock rom .
jje
Thank you.Can you also link me to the stock recovery?I want it to go back the way it originally was. so I can send it in.
Steam. said:
Thank you.Can you also link me to the stock recovery?I want it to go back the way it originally was. so I can send it in.
Click to expand...
Click to collapse
Stock recovery ???? what is that ???
Read the basics faqs and guides .
jje
If you flash a full stock Rom with Odin you'll downgrade to stock recovery.
I see.I forgot to mention, I also have a backup made by CWM from the stockrom, but it's in a different location now because it's been moved by installing 4.2.I have PhilZ touch recovery already installed on it.Is it also possible to restore from CWM(after wiping the beforementioned partitions, ofcourse)?
i'm just afraid to use download mode as I already have the faulty eMMC's and using DL mode triggers that.Or, getting stuck on NAND write start.
You can only flash stock roms via download mode, so its a risk you have to take. You can't use Philz or CWM to flash.
What ROM were you on when you first rooted?
I was on the stock 4.1.2 android and I still have a backup from it but like I said its now moved to the sdcard/0 path.I'm still on CM now and I have philz recovery atm.So is it possible to restore it like that?
Sent from my Desire HD using Tapatalk 2
If you were on stock 4.1.2 before root, you have a safe bootloader so you can use odin.
Sure you cab restore nandroid backups from recovery. That's the whole point of them.
It depends WHY you want to restore though. It's rooted and won't restore recovery so it doesn't restore warranty status. Its pretty pointless. Infact its entirely pointless. like I said, depends what you want. There is only 1 way yo restore it 100% stock, as previously mentioned
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
If you were on stock 4.1.2 before root, you have a safe bootloader so you can use odin.
Sure you cab restore nandroid backups from recovery. That's the whole point of them.
It depends WHY you want to restore though. It's rooted and won't restore recovery so it doesn't restore warranty status. Its pretty pointless. Infact its entirely pointless. like I said, depends what you want. There is only 1 way yo restore it 100% stock, as previously mentioned
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I appreciate your effort in order to explain that to me, so thank you for that.I know that when it dies it's dead for good, and I don't think they will be able to detect the software that was on it, so I have just put ARHD on it, I know it since the old days on Desire HD(which i still own), it runs great, both on the DHD and on this now.Thanks for your troubles, but I'm sure to return to 100% stock whenever now that I know this info.Thank you all!

[ROM] [30-Oct] Last Firmware Stock (TWPR) << D855-10N>>

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Why use this ROM ???
For the simple reason that if you like having the latest official update without modifications to make things your way, but want to have bugs that lead often changes made ​​by developers, if you want to keep track unlocking the bootloader (there were rumors that in an update could become blocked from using Bump! to release the bootloader and would lose all ability to install roms.
Features:
Last Firmware D855
Root & Busybox
Adblock Host
Removed gapps that are available in playstore (book, magazine, youtube, gmail, chrome, hangout etc.)
Disabled LG OTA (I will only disable firmware updates, the apps for the lg will be available without problem).
Installation:
Root & TWRP (http://forum.xda-developers.com/lg-g3/orig-development/bump-unlock-lg-g3-twrp-d852-d852g-f400-t2900614)
Download Zip and copy
Reboot in TWRP
Full Wipe (Dalvik, Cache, System & Data if it is the first time you install, should be a next update reaches only to wipe cache and dalvik but mistakes is advisable to perform a clean installation)
Install Zip
Reboot
WARNING !!!!
The rom only contains what is described above, the rest is 100% stock. The installer performs the same only wipe system alone so the other wipes borne by each user.
Excludes bootloader and modem, only system and kernel.
DOWNLOAD
Thks: Cloudy (script root and busybox), thecubed (bump!)​
ScreenShot Last Firmware...
Can't wait to try
Sounds very promising. Will be checking this page frequently throughout the day . Thank you!!
Do put up flashing instructions in the 1st post once uploading completes. Thanks for your efforts. Much appreciated !
Nice !
Thanks !
I'm currently on AndroidNow HD 1.7. How would I flash this? Would I be ok to do an advance we(system,data,cache & dalvic) and just flash from there?
Yes
Thank you!
What's the kernel build date of this version?
freaked9 said:
Thank you!
What's the kernel build date of this version?
Click to expand...
Click to collapse
Oct 22 20:42:38 KST 2014
Link aviable
Im running stock D855 - software 10i - is it OK to dirty flash this to keep all my other stuff and really just add the benifits of the new firmware?
Cheers.
trying this when ready thanks
Vivasanti said:
Im running stock D855 - software 10i - is it OK to dirty flash this to keep all my other stuff and really just add the benifits of the new firmware?
Cheers.
Click to expand...
Click to collapse
For once maybe you do it first and share your experience with us.
Vivasanti said:
Im running stock D855 - software 10i - is it OK to dirty flash this to keep all my other stuff and really just add the benifits of the new firmware?
Cheers.
Click to expand...
Click to collapse
when you flash with lg flash tool you have to cse flash that you dont get errors... i dont know but it may be that you must do a full wipe.
but try it and share it with us
Flashed and all ok did try dirty flash and phone booted ok but couldnt unlock home screen so had to use adb reboot to bump twrp. There did full wipe and install all is good
this is official firmware flash with recovery !?
steveria79 said:
this is official firmware flash with recovery !?
Click to expand...
Click to collapse
Yes do full wipe
So how do we flash this then Op thanks in advance
Sent from my LG-D855 using XDA Free mobile app
Post updated...
Great work thank you ☺

Categories

Resources