MIUI 2.4.20 Notification LED problem - Streak 5 Q&A, Help & Troubleshooting

In the past i have had issues getting this to work, i am sure i am not alone.
Right now, i have freshly installed MIUI 2.4.20 with the latest Pheonix kernel and_ modules, various fixes for the other issues with that rom.
One problem that always arises, getting the notification leds to work.
So i flash, and then choose custom so it crashes, then pull battery, go into streakmod and flash custom_light_fix.zip, which leaves the device stuck on boot screen, in the past, one option was to then flash MIUIFixen.zip, however at this time, this works to a point, however led lights are basically on all the time, anybody have any suggestions?

Anybody?

(InsertNameHere) said:
Anybody?
Click to expand...
Click to collapse
Which baseband are you using? Did you try BB 406? 406 worked for me.

(InsertNameHere) said:
In the past i have had issues getting this to work, i am sure i am not alone.
Right now, i have freshly installed MIUI 2.4.20 with the latest Pheonix kernel and_ modules, various fixes for the other issues with that rom.
One problem that always arises, getting the notification leds to work.
So i flash, and then choose custom so it crashes, then pull battery, go into streakmod and flash custom_light_fix.zip, which leaves the device stuck on boot screen, in the past, one option was to then flash MIUIFixen.zip, however at this time, this works to a point, however led lights are basically on all the time, anybody have any suggestions?
Click to expand...
Click to collapse
If u use MIUI 2.4.20 from nitin1987 try installing blinking led from tatank_t version manics on this thread
http://http://forum.xda-developers.com/showthread.php?t=1546302
that's work for me and try to turn off "Pulse notification LED" in Setting-Personal-Trackball menu

abdulm said:
Which baseband are you using? Did you try BB 406? 406 worked for me.
Click to expand...
Click to collapse
faroukrajasa said:
If u use MIUI 2.4.20 from nitin1987 try installing blinking led from tatank_t version manics on this thread
http://http://forum.xda-developers.com/showthread.php?t=1546302
that's work for me and try to turn off "Pulse notification LED" in Setting-Personal-Trackball menu
Click to expand...
Click to collapse
Thanks guys, i am using latest baseband, cannot change as PDMI port is broken.

faroukrajasa said:
If u use MIUI 2.4.20 from nitin1987 try installing blinking led from tatank_t version manics on this thread
http://http://forum.xda-developers.com/showthread.php?t=1546302
that's work for me and try to turn off "Pulse notification LED" in Setting-Personal-Trackball menu
Click to expand...
Click to collapse
Your link is broken.

(InsertNameHere) said:
Your link is broken.
Click to expand...
Click to collapse
The colon after "http" in the link is missing. Insert it in and I can open the page.

Related

[TELUS ONLY] [GUIDE] How to Flash 2.3.4 MIUI/CM7 Rom into your TELUS Fascinate

This is only for Telus Fascinate not Verizon Fascniate!!
I'm not good at speaking English just you know (or can somebody rewrite this for me??)
As you know, Telus Fascinate is pretty simillar to Galaxy I9000
The differences between those two are FF Camera, buttons, and some others
Okay Ill shut up and let you know how to flash MIUI/CM7 rom
Flash it at your own risk!!! I'm not responsible for anythings that you just did!! This is only for people who know how to fix your 700$ toy. Read Carefully.!! There might be alot of bugs when you are using this methoud.
Things that you need​
1. speedmod-kernel-k13c-500hz.tar
2. Newest Version of MIUI Rom or Newest Version of CM7 Rom
3. cm7-galaxys-initial-kernel.tar
4. galaxy-efsbackup.zip
5. [CM7/MIUI]Telus Fascinate Platypus Kernel​
Here is How! (How to flash it, when you are using stock Froyo Rom)​
1. Get those files download​
2. Copy all these files into your Phone (except speedmod-kernel-k13c-500hz.tar & cm7-galaxys-initial-kernel.tar files)​
3. Get into download mode and than flash speedmod-kernel-k13c-500hz.tar with using odin (do not check mark on the repartition!)​
4. Get into recovery mode and than install galaxys-efsbackup.zip​
5. Turn off your device and than get into download mode again​
6. Install cm7-galaxys-initial-kernel.tar with using odin again (do not check mark on the repartition and auto reboot!!!)​
7. Unplug your USB and than get into recovery mode again​
8. Choose "mounts & storage" and format system, data, and cache​
9. Flash MIUI Rom or CM7 Rom​
10. Reboot your device and you will see MIUI rom booting and make sure you are in service and 3g working fine. If you dont get any of that you might have to go back to stock Froyo rom and do this steps again.​
11. If you have service and 3g data working, go to recovery mode again!!​
14. After done flashing it install [CM7/MIUI]Telus Fascinate Platypus Kernel kernel from recovery​
15. Reboot your device and you will be running MIUI Rom or CM7 Rom
Starting from Telus Fascinate Platypus Kernle Quorra-r8, there is no need of changing home key and back key​
16. There is a problem between home key and back key. They are reversed. so Donload Root Explorer app
17. Run Root Explorer and than go look for /system/usr/keylayout/cypress-touchkey.kl longpress of cypress-touchkey.kl file and you will see Open in Text Editor Press it
18. you will see in your text​
key 139 MENU VIRTUAL
key 102 HOME VIRTUAL
key 158 BACK VIRTUAL
key 217 SEARCH VIRTUAL​
19. Change this in to​
key 139 MENU VIRTUAL
key 158 HOME VIRTUAL
key 102 BACK VIRTUAL
key 217 SEARCH VIRTUAL​
20. and save it and reboot your device!!!!!​
Please read this guide carefully and flash it at your own risk!!!!!
Sorry for my Bad English !!!!!
Thanks to (please dontae them!!)
The MIUI9000 team :MAMBO04, jblanc and Kenia
CyanogenMod team
zacharias.maladroit for the Kernel Build (Big thanks to you!!)​
I know that you guys will understand my guide
I would be happy to test this on my device. Glad to see more roms/tutorials for the telus facinate.
Sent from my GT-I9000 using XDA App
Tested, with my modded way to install CM7 (Cant access recovery with hard key got me hard time ( I am not sharing this way to install as it's really dangerous)). Confirming that everyting is working very well on my phone. + I love this ^^. thx man.
chadouming said:
( I am not sharing this way to install as it's really dangerous)).
Click to expand...
Click to collapse
can you pm me about this part?? i want to test it too.
Which CM 7 files do you recommend using: Galaxy S or Vibrant?
What about flashing back the Telus modem?
daoom said:
Which CM 7 files do you recommend using: Galaxy S or Vibrant?
What about flashing back the Telus modem?
Click to expand...
Click to collapse
I recommend to use GALAXYS and you dont need to worry about flashing back the Telus modem cause it is fine to use jvk modem.
If you want it, i can make one for you.
harimgs said:
I recommend to use GALAXYS and you dont need to worry about flashing back the Telus modem cause it is fine to use jvk modem.
If you want it, i can make one for you.
Click to expand...
Click to collapse
I'm sure it's somewhere already, but it would be nice of you to add it
daoom said:
I'm sure it's somewhere already, but it would be nice of you to add it
Click to expand...
Click to collapse
Can you submit a telus modem file for me??
Magnetic detector isn't working. Has some issues getting to HSPA (Stays on 3g) but everything else works.
I'll rewrite this bad boy for you if you wish.
nvm, I was wrong lol
Doc_rockulus said:
Magnetic detector isn't working. Has some issues getting to HSPA (Stays on 3g) but everything else works.
I'll rewrite this bad boy for you if you wish.
Click to expand...
Click to collapse
you mean g-sensor(gravity sensor) right?
just reboot your device few times 2~3 times, its just a normal problem that everyone has
danboard said:
nvm, I was wrong lol
Click to expand...
Click to collapse
you was wrong about what?
harimgs said:
you mean g-sensor(gravity sensor) right?
just reboot your device few times 2~3 times, its just a normal problem that everyone has
Click to expand...
Click to collapse
No, I'm refering to the built in geo-magnetic sensor. Essentially the built in compass.
Edit: But the accelerometer doesn't work either, I don't particularly care about that.
Also, occasionally after being plugged in, the software seems to ignore the fact that it's charging until reboot. That one sucks because it stops charging while I'm sleeping.
Camera app occasionally won't display a preview until the phone is locked/unlocked with the app open. Widgets disappear puriodically, and sometimes it won't let me fruit ninja
Hey harimgs,
is it normal to constantly bootloop on miui? My phone will bootloop 3 or 4 times then finally boot on the 5th.
danboard said:
Hey harimgs,
is it normal to constantly bootloop on miui? My phone will bootloop 3 or 4 times then finally boot on the 5th.
Click to expand...
Click to collapse
The first few times it takes a while, I think the boot animation is too long/too short. I changed it to a different one (Through the theme manager) and it boots a lot quicker now.
Do I have to flash the CM7_TELUS-FASCINATE_platypus-kernel_20110418_16_core.zip and then the WiFi fix? Or can I just flash the Wifi fix?
Doc_rockulus said:
Do I have to flash the CM7_TELUS-FASCINATE_platypus-kernel_20110418_16_core.zip and then the WiFi fix? Or can I just flash the Wifi fix?
Click to expand...
Click to collapse
You gotta flash CM7_TELUS-FASCINATE_platypus-kernel_20110418_16_core.zip and than if your wifi works and everythung else works fine, you dont have to flash wifi fix kernel. If dont flash it
Sent from my GT-I9000 using XDA Premium App
So, say I wanted to overclock the phone, afaik there is no kernel allowing to do that, right? Supercurio's didn't allow it when I used it on my 959D to load Darky's and SimplyHoney and I just flashed CM7 using the instructions in this thread (so I'm now running Platypus kernel).
Also, is there a lagfix included with CM7?
Hey! I was using 2.3.3 miui rom with Platypus everything worked fine, I upgraded myself to the new miui rom which uses 2.3.4 and problem is when I flash the kernel if wont go past the cm7 boot logo. I have flashed it several times and reinstalled the rom still same issue.

[Q] Frequent random reboots [KS2/KS3 stock/custom]

hi.
i flashed stock rom S5830XWKS2 through Odin. the phone started rebooting randomly.
then i flashed custom rom TheMyth KS3 but the problem kept getting worse. when i'm using the phone, it reboots every few seconds.
i flashed stock rom S5830XWKS3. but the Baseband version in the phone didnt change (S5830XWKS2). and the problem is still persistent.
the phones does not do full reboot. it freezes, the screen goes black, then goes strait to the boot animation.
also, if it reboots while transferring files through mass usb storage, the transfer doesnt stop, to continues normally.
1. any idea why is this happening?
2. why didnt the baseband version change when i flashed KS3?
3. do you recommend another stock rom to flash.
p.s: KS3 seems fast. i got 1040 score in quadrant on stock rom.
i would appreciate any help. thanks
dali47 said:
hi.
i flashed stock rom S5830XWKS2 through Odin. the phone started rebooting randomly.
then i flashed custom rom TheMyth KS3 but the problem kept getting worse. when i'm using the phone, it reboots every few seconds.
i flashed stock rom S5830XWKS3. but the Baseband version in the phone didnt change (S5830XWKS2). and the problem is still persistent.
the phones does not do full reboot. it freezes, the screen goes black, then goes strait to the boot animation.
also, if it reboots while transferring files through mass usb storage, the transfer doesnt stop, to continues normally.
1. any idea why is this happening?
2. why didnt the baseband version change when i flashed KS3?
3. do you recommend another stock rom to flash.
p.s: KS3 seems fast. i got 1040 score in quadrant on stock rom.
i would appreciate any help. thanks
Click to expand...
Click to collapse
Hey !
The Baseband Version is KS2 while Build is KS9 (in my stock rom)
If you end in Bootloops, press Power + Home till you get into recovery, then Clear data/Factory Reset and clear Cache, then reboot.
Come back and tell me if it worked for you.
Greetings
thank you for your reply.
it's actually not a bootloop. the phone boots normally and works fine for some times (few seconds/minutes) then it freezes for few seconds, then the screen turns black for a second, then shows the boot animation (doesn't show the boot screen with the samsung logo). it works fine for some time, then again.
it seems that the problem is related to the wifi. it only happens when wifi is on.
On Samfirmware.com they say that you should make a Factory Reset after flashing, maybe that works for you ? I flashed the KS9 Stock today and had some problems till I did this in Recovery. Else I would have no Idea, maybe reflash or get another Version ?
You could also try to install any custom Rom, like Jusada´s ICS for example, just to test if there are problems with CM also ..
Umm, maybe a question to those who only touch the Earth to answer our Newb questions...is it possible that the Ace restarts when it get´s attacked from the outside ? I faced that after flashing a Rom that I modified and didn´t have the right Permissions the Phone restarted/bootlooped when I tried to install any App (\data\app wasn´t set correct)
Greetings
thank you. i guess i'll try to flash again. or maybe try a different stock.
dali47 said:
thank you. i guess i'll try to flash again. or maybe try a different stock.
Click to expand...
Click to collapse
If you had the Android SDK Tools , you could show me a logcat of what's going on
EmoBoiix3 said:
If you had the Android SDK Tools , you could show me a logcat of what's going on
Click to expand...
Click to collapse
hi. i do have the sdk. here are a few log files:
http://pastebin.com/Amt00nuY
http://pastebin.com/SHeasfvq
http://pastebin.com/sirV2FEe
this is the first time i use logcat, so if there is a command or option i should use to make the log file more useful, just let me know.
thank you for your time
dali47 said:
hi. i do have the sdk. here are a few log files:
http://pastebin.com/Amt00nuY
http://pastebin.com/SHeasfvq
http://pastebin.com/sirV2FEe
this is the first time i use logcat, so if there is a command or option i should use to make the log file more useful, just let me know.
thank you for your time
Click to expand...
Click to collapse
The original TheMyth creator said that KS3 was badly unstable .
Use KS2 instead
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
The original TheMyth creator said that KS3 was badly unstable .
Use KS2 instead
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
He should try to upgrade to KS3 v1.1. That's final update for TheMyth KS3 with:
- Meizu Myth theme
- BLN Control activated
- changed some small things
>> I think this update can help him to solve frequent random reboot in TheMyth KS3
http://mobile.livemodding.com/forum/398-samsung-galaxy-ace/
Click to expand...
Click to collapse
my first attempt was with KS2. that's when the problem started, even before i install TheMyth. The 1.1 update didnt help either.
I guess my phone is not getting along with the KS2 baseband. i will just switch to GingerReal, hopefully it will be stable.
thank you everyone

phone problem

hi everyone, im using dixperia rom but when i hold my ON button now left with only power off and reboot. it used to have airplane mode, silent mode, power off mode and reboot. how to i get it back?
and also but home button is not working whereas my other 2 button is working
how can i solve it?
thx
i guess your current version of the rom just dont support it try installing the latest version of ur rom. maybe the devs have already updated it.
Devin-J said:
i guess your current version of the rom just dont support it try installing the latest version of ur rom. maybe the devs have already updated it.
Click to expand...
Click to collapse
my rom support it. i used this for couples of month. it happens just ytd night
Probable situations
jincao said:
my rom support it. i used this for couples of month. it happens just ytd night
Click to expand...
Click to collapse
Hi, If you refering when you first time using that ROM, the "power option" still there but after few days/months, the options are gone.....Probably lies on
1)Framework related (Not intergrated permanently/completely to System) or
2)Temporary coding support effect wear off (which may last for few days/months).
Quite Similar to "Xloud/BRAVIA support lost" in certain ROMs, they could be gone from settings just after few days flashed certain ROMs
Normally these problems (yours may included) can be treated by reflashing ROMs/Framework related update-zip. Please note that once again, reflashing ROM zip will wipe all your Users and System Data. If problem still happening, please PM your ROM developer about your case for seeking best suggestions and solutions. Providing screenshot will be also helpful for developer to understand your situation. Hope helps. TQ
sincerely,
whitefang
jincao said:
hi everyone, im using dixperia rom but when i hold my ON button now left with only power off and reboot. it used to have airplane mode, silent mode, power off mode and reboot. how to i get it back?
and also but home button is not working whereas my other 2 button is working
how can i solve it?
thx
Click to expand...
Click to collapse
I remember I had the same problem once. Only reflashing ROM helped.
whitefang3456 said:
Hi, If you refering when you first time using that ROM, the "power option" still there but after few days/months, the options are gone.....Probably lies on
1)Framework related (Not intergrated permanently/completely to System) or
2)Temporary coding support effect wear off (which may last for few days/months).
Quite Similar to "Xloud/BRAVIA support lost" in certain ROMs, they could be gone from settings just after few days flashed certain ROMs
Normally these problems (yours may included) can be treated by reflashing ROMs/Framework related update-zip. Please note that once again, reflashing ROM zip will wipe all your Users and System Data. If problem still happening, please PM your ROM developer about your case for seeking best suggestions and solutions. Providing screenshot will be also helpful for developer to understand your situation. Hope helps. TQ
sincerely,
whitefang
Click to expand...
Click to collapse
ya i tried reflashing the rom but the problem still exists and my data did not lost
jincao said:
hi everyone, im using dixperia rom but when i hold my ON button now left with only power off and reboot. it used to have airplane mode, silent mode, power off mode and reboot. how to i get it back?
and also but home button is not working whereas my other 2 button is working
how can i solve it?
thx
Click to expand...
Click to collapse
Sometimes it happens when you mess around with custom ROMS.. my advise is instal the ROM again with full wipe and formatting the MMC.. Solves the issue pretty easy..
udupa82 said:
Sometimes it happens when you mess around with custom ROMS.. my advise is instal the ROM again with full wipe and formatting the MMC.. Solves the issue pretty easy..
Click to expand...
Click to collapse
Yeah, full wipe. That's what I forgot to mention
Sent from my X10i using xda app-developers app

Touch problem in roms

My screen broke and I got it replaced by a third party.
I changed the rom today and my touch wasn't working in the new rom. It worked fine in twrp but as soon as i booted into the system it stopped working. I booted back to twrp and it was still working there but not in the rom.
Is there any file or zip that can fix this issue? I know about Agni kernel and it fixes the issue but i suspect that it is also causing lag. I want to test the rom without flashing agni kernel and only using the touch fix zip.
Any help is appreciated.
i love agni kernel (performance and audio boost).
but if not like you this kernel... i dont know if exists a patch.
Probably your new remplace is FOCALTECH.
if you clean install a new rom try with agni kernel again... remember install all kernel over original one and not mod kernel over other mod kernel.
here: https://forum.xda-developers.com/redmi-note-3/development/devs-kenzo-hardware-variations-t3458389
the people talk about hardware variations on RN3Pro (i dont read all the post)
I have replaced screen too, my touch is working fine but my screen color is broken, it will fine after reboot from long press power button but will broke again after screen off, are anyone facing this too? I'm on xtended oreo
strawjerry said:
I have replaced screen too, my touch is working fine but my screen color is broken, it will fine after reboot from long press power button but will broke again after screen off, are anyone facing this too? I'm on xtended oreo
Click to expand...
Click to collapse
Use aida or other soft to see what screen hardware use.
Chrisis25 said:
Use aida or other soft to see what screen hardware use.
Click to expand...
Click to collapse
Mine is boe
Boe nt35532?
Do you use kernel adiutor? Or other app with colour profiles?
Chrisis25 said:
Boe nt35532?
Do you use kernel adiutor? Or other app with colour profiles?
Click to expand...
Click to collapse
Yes, I use kernel adiutor
strawjerry said:
Yes, I use kernel adiutor
Click to expand...
Click to collapse
go to:
Screen>Screen Hue> and select 0 (no more), try with it.
Chrisis25 said:
go to:
Screen>Screen Hue> and select 0 (no more), try with it.
Click to expand...
Click to collapse
Already have it

Problems with notifications on every AOSP rom.

Tried almost all pie roms. Wifi disconnects after a while i lock the phone. Or it won't use data even if it seems to be connected to wifi. Changing fw, kernel, recovery didn't work. Neither did flashing fastboot rom. What should i do? (i thought notification was the problem ,but no, i figured it was wifi)
Kaanarchy said:
I don't get notifications after 10-15 mins after i closed that application. (For example i'm starting whatsapp then i'm closing it again. After some minutes i won't get any notifications and whatsapp will not use data if i don't open it manaully.) And sometimes notifications will come, but so late. Every settings is ok. Tried havoc, aosp extended, crdroid, superior it is still same. Changed kernel, updated firmware, it is still the same. What can i do? I feel like my phone is forcing me to use miui roms
TWRP = 3.2.3-1 unofficial
Click to expand...
Click to collapse
use orangefox recovery for better flashing of the roms. and your problem will be solve
JR Bautista said:
use orangefox recovery for better flashing of the roms. and your problem will be solve
Click to expand...
Click to collapse
thanks i will try, but my friend using redmi 5 plus with same recovery menu (3.2.3-1 unofficial) and doesn't have problems. I wonder why i have problems
Kaanarchy said:
thanks i will try, but my friend using redmi 5 plus with same recovery menu (3.2.3-1 unofficial) and doesn't have problems. I wonder why i have problems
Click to expand...
Click to collapse
this is unofficial mean there's a bug that not expecting
using orange fox. on aex 6.4 rom. still having the same problem
JR Bautista said:
this is unofficial mean there's a bug that not expecting
Click to expand...
Click to collapse
the link has given me by a rom tester for redmi 5 plus on youtube. he said he didn't have problems too. I know 2 person using this and they don't have problems. But anyway i will try another one thanks. And also can it be related with gapps? i always flash nano and i always download my applications with google backup. But i tried to delete some apps and download them manually and that didn't work too.
Kaanarchy said:
the link has given me by a rom tester for redmi 5 plus on youtube. he said he didn't have problems too. I know 2 person using this and they don't have problems. But anyway i will try another one thanks. And also can it be related with gapps? i always flash nano and i always download my applications with google backup. But i tried to delete some apps and download them manually and that didn't work too.
Click to expand...
Click to collapse
if you are using treble rom then use orangefox if not use official twrp
i tried orangefox with havoc and xenon, still same problem..
Maybe a firmware update?
Like this fw_vince_miui_HM5PlusGlobal_8.11.15_dd40bfa136_8.1
joke19 said:
Maybe a firmware update?
Like this fw_vince_miui_HM5PlusGlobal_8.11.15_dd40bfa136_8.1
Click to expand...
Click to collapse
i tried 3-4 firmwares and that didn't work (new ones). Now I changed my recovery to red wolf and gapps nano to bitgapps. let's see if it works.. If it won't, i will try older firmwares.
it's still happening. I lock the screen and everything is ok for 10-15 min. But after that apps doesn't use data anymore so there is no notifications too. If i start something requires internet connection like google chrome, they will come. Pls someone help :/ i checked every settings
Kaanarchy said:
i tried 3-4 firmwares and that didn't work (new ones). Now I changed my recovery to red wolf and gapps nano to bitgapps. let's see if it works.. If it won't, i will try older firmwares.
Click to expand...
Click to collapse
The last Chinese work for me.
nothing works. I even flashed fastboot rom and went back to pie again. Wifi disconnects after a while i lock the phone. Or it won't use data even if it's connected to wifi.

Categories

Resources