Latest Update Of Patched AOSP Based MIUI v4 (4.1.2)
Click to expand...
Click to collapse
................................................................................................................................................................................................................
JELLY BEAN VERSION
INSTALATION GUIDE FOR FIRST TIME
1. Make sure you're rooted and on ICS bootloaders. This ROM is on android 4.1.2
2. Reboot to recovery.
3. Wipe data/Factory Reset
4. Wipe cache
5. Mounts and Storage > Format System
6. Wipe Dalvik Cache
7. Install MIUI ROM
9. Reboot & Personalize Rom as Normal & ENJOY.
NO INSTALING OF OTHER KERNEL
Click to expand...
Click to collapse
INITIAL DOWNLOADS
I777 - MIUI v4 - 3.3.1 - 4.1.zip
ADDONS
1.Gapps - JB - 2012.10.11 - MIUI - i personally dont use this gapps...i download it seprately...
2.I9100 - Language Pack - 3.2.8.zip - I have'nt tested it yet...so plz do a nandroid backup before you install this pack...as per biohazard this should work on I777
3.MIUI V5 - White.mtz - Put the MTZ file in MIUI/Themes and install it via theme manager...
Click to expand...
Click to collapse
................................................................................................................................................................................................................
BUGS & WORKAROUNDS???
TO CHANGE THE DPI - AFTER THE ROM IS SETUP PROPERLY, INSTALL ROM TOOLBOX LITE AND CHANGE THE STRING WHICH SAYS ro.sf.lcd_density
DISABLE THE ANIMATIONS IN DEVELOPERS OPTIONS TO GET SMOTH ROM USAGE
THIS SHOULD BE YOUR PRIMARY ROM. OR YOU MIGHT FACE BOOT LOOPS.
................................................................................................................................................................................................................
ALL THANKS GO TO
IXANZA - For the 4.1 discovery and porting so far.
MIUI - For the I9100 update files.
GERGUTER - For letting us know and use the updates so far.
Faryaab - For the I9100 Rom & Kernel
-BioHaZard- - For the Multi Language Pack
Lord Of Hell - For whatever way you think I helped you
badblood_antony said:
First of All I tried porting the update package to our I777.
But for some DAMN reasons it wont get past the boot screen.
So i decided to port the entire package.
**********************************************************************************************************************************************************************
Follow the Colour Codings Plz -
Green - M sure It Works.
Orange - M not sure. Maybe or Maynot Work.
Red - May god help u.
Installation Guide For first timers :
Make sure you're rooted and on ICS bootloaders. This ROM is on android 4.1.2
Reboot to recovery.
Wipe data/Factory Reset
Wipe cache
Mounts and Storage > Format System
Install MIUI ROM
Install Siyah Kernel
Please, REBOOT, and then flash Gapps.
Do NOT flash them back to back! It will cause Home button not working..!
Reboot Again
DONOT CHANGE THE KERNEL OTHER THAN PROVIDED SIYAH TILL FURTHER INFO. PLZ REPORT ANY ONE WITH ISSUES.
Update Guide :
Download the update file from the link above or from the bottom of this post.
Put it into your SDCard
Reboot to recovery
Install update through recovery
Fix Permissions
Reboot Phone
Note : You must be on the previous version to update to the latest version. EG :Update 3.1.25 requires you to be on 3.1.18
Enjoy. Once again I have just ported the Rom. I found this and I'm just Porting this for you guys.
**********************************************************************************************************************************************************************
Bugs ???
Low Sound Issue - (ISSUE RESOLVED WITH THE LATEST UPDATE)
**********************************************************************************************************************************************************************
All thanks goes to -
IXANZA - for the 4.1 discovery and porting so far.
MIUI - for the I9100 update files.
GERGUTER - for letting us know and use the updates so far.
Ktoonsez - for the awesum kernel.
Myself - for whatever way you think I helped you
**********************************************************************************************************************************************************************
Downloads -
1.
2. Siyah-I777-v7.8.5
3. gapps-jb-20121011_MIUI
Click to expand...
Click to collapse
Looking forward to trying!
:laugh:
Done Uploading...
badblood_antony said:
Done Uploading...
Click to expand...
Click to collapse
Acting a little buggy. Won't boot to lock screen. Sometimes you can get to the home screen but when you push the power button to lock the phone will restart. Just a little heads up.
gerguter said:
Acting a little buggy. Won't boot to lock screen. Sometimes you can get to the home screen but when you push the power button to lock the phone will restart. Just a little heads up.
Click to expand...
Click to collapse
Hmm...didnt encounter this still yet..
badblood_antony said:
Hmm...didnt encounter this still yet...lets work on it....
Click to expand...
Click to collapse
Strike what I said before. I think I may have done a couple of things wrong. I'll get back to ya in a few minutes.
gerguter said:
Acting a little buggy. Won't boot to lock screen. Sometimes you can get to the home screen but when you push the power button to lock the phone will restart. Just a little heads up.
Click to expand...
Click to collapse
gerguter said:
Strike what I said before. I think I may have done a couple of things wrong. I'll get back to ya in a few minutes.
Click to expand...
Click to collapse
OK...try full wipe n install this time no Gapps...cuz i never installed them myself...also this should be your primary rom. as per siyah kernel multiboot dosent work on Samsung JB..
working on the rom for some new modifications like the boot screen and lock screen in the same pack..hope it works..meanwhile uploading the new rom which shows I777
badblood_antony said:
OK...try full wipe n install this time no Gapps...cuz i never installed them myself...also this should be your primary rom. as per siyah kernel multiboot dosent work on Samsung JB..
working on the rom for some new modifications like the boot screen and lock screen in the same pack..hope it works..meanwhile uploading the new rom which shows I777
Click to expand...
Click to collapse
Everything is working good. Just got the order wrong. I was in a hurry! Thanks for the update and looking forward to more releases! I will let you know if I find anything. Again, thanks for your work!
gerguter said:
Everything is working good. Just got the order wrong. I was in a hurry! Thanks for the update and looking forward to more releases! I will let you know if I find anything. Again, thanks for your work!
Click to expand...
Click to collapse
no issues buddy...m just sharing things which help others as u do...lemme know if any bugs comes up...n m working on the updates part..take care..:good:
Great work, I'll definitely try this out! One question, more of a very general MIUI question. One of my favourite things about my current ROM is that I have a unread notification (bubble over the app icon), is there anything like that stock in MIUI or is there some theming required?
EDIT - Install failed, your prop file is funky...
EDIT 2 - I followed the instructions to the letter, and it boots up into the OS then back to boot animation...
Arcen1k said:
Great work, I'll definitely try this out! One question, more of a very general MIUI question. One of my favourite things about my current ROM is that I have a unread notification (bubble over the app icon), is there anything like that stock in MIUI or is there some theming required?
EDIT - Install failed, your prop file is funky...
EDIT 2 - I followed the instructions to the letter, and it boots up into the OS then back to boot animation...
Click to expand...
Click to collapse
Build Prop Issues: This happened to me as well. Install the kernel first and then choose the option to reboot into recovery and install the ROM. That should clear up your build prop issues.
Install: Install the ROM. Boot system. Reboot into recovery after it loads. Wipe cache partition and dalvick cahce. Reinstall kernel. Boot system. Reboot into recovery after it loads. Wipe cache partition and dalvick cache again. Install the gapps package. Boot system and enjoy!
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
Thanks for the reply gerguter...are those steps working ?? It should as I tried those same steps yesterday...it worked for me...couldn't reply as I had a morning shift as per IST...
Also I'll update the same steps in OP if any1 else have got them working...
sent from Hell using SGH-I777
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
Arcen1k said:
Great work, I'll definitely try this out! One question, more of a very general MIUI question. One of my favourite things about my current ROM is that I have a unread notification (bubble over the app icon), is there anything like that stock in MIUI or is there some theming required?
EDIT - Install failed, your prop file is funky...
EDIT 2 - I followed the instructions to the letter, and it boots up into the OS then back to boot animation...
Click to expand...
Click to collapse
Well the only notifications on apps I get is when I install go launcher along with the notification plugin and that too only on msg, calls and gmail...
sent from Hell using SGH-I777
badblood_antony said:
Thanks for the reply gerguter...are those steps working ?? It should as I tried those same steps yesterday...it worked for me...couldn't reply as I had a morning shift as per IST...
Also I'll update the same steps in OP if any1 else have got them working...
sent from Hell using SGH-I777
Click to expand...
Click to collapse
Those are the same steps I used to get everything working yesterday so I think they should work for everybody.
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
gerguter said:
Those are the same steps I used to get everything working yesterday so I think they should work for everybody.
Click to expand...
Click to collapse
Alright I have updated both the steps in the OP...
Let's continue those steps while I upload the modified ROM...should be available in couple of hrs...also I have uploaded the new screenshots of the modified ROM...
sent from Hell using SGH-I777
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
OP updated with link to new ROM build....
badblood_antony said:
OP updated with link to new ROM build....
Click to expand...
Click to collapse
Hold on...OP not getting with the link...
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
badblood_antony said:
Hold on...OP not getting with the link...
Click to expand...
Click to collapse
Uploaded the moded rom and also the latest siyah kernel..lemme know if there is any bugs..
Sent from my SGH-I777 using xda app-developers app
Does not work! Did everything by guide. Phone reboots every time! Crappy firmware! Before you upload - you need to test!
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
ClubOK said:
Does not work! Did everything by guide. Phone reboots every time! Crappy firmware! Before you upload - you need to test!
Click to expand...
Click to collapse
It seems it works for all others specially me and gerguter... also m using the ROM from yesterday...haven't got even single issue...why all issue comes to u man ???
Sent from my SGH-I777 using xda app-developers app
Related
ULTRAICS 5.0 HOLO - SOON -
Click to expand...
Click to collapse
Whos Donated me:
http://forum.xda-developers.com/showpost.php?p=22878543&postcount=7
Click to expand...
Click to collapse
Specification 4.1:
- Based on XXLPQ
- Modem XXLPQ
- CSC : OXALPQ
- Rooted
- Deodexed
- Zipaligned RE
- Signed
- Siyah ICs beta4 Touch recovery Kernel
- New reworked scripts by me for best performance and battery
- Full Holo Themed
- Ics boot animation
- removed samsung keyboard,
- added trebuchet launcher
- added ICS keyboard - with more language
- added Google Music 4.1.511
- added ICS lockscreen
- Added Crt Off Animation
- AOSP Sms/Mms
- AOSP Contatcs
- AOSP Dialer
- Themed apps /camera.../
- etc...
Click to expand...
Click to collapse
How to install: WIPE!!!!
0. Root your phone / with cf root kernel/
1. copy downloaded zip's to internal sd
2. Go to recowery wipe cache - dalvik cache
3. In recowery install zip from internal sd....-install the GTI9100_Bezke...
4. Reboot and wait 2-3 minute...
5. After phone 1st started -ONLY AFTER if you would set the contacts to AOSp ----- power off-----go recovery-----install aospcontactsmms.zip---- reboot
If there are any fc's- repeat from 2. step, and make a full wipe before flash rom...
Click to expand...
Click to collapse
If you like my works call me for a Beer:
PAYPAL DONATIONS:
1 USD: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=AM9WDB4Q7NHPW
2 EUR: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLWDW6G96KHBJ
3 HUF: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=6P4W5ML98KYPU
4 CHF: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=QP6BUYQAV9ASW
DOWNLOAD ULTRAICS 5.0 HoLo:
Soon
Before download please thx for me
Click to expand...
Click to collapse
-Please be patient-
Click to expand...
Click to collapse
FAQ:
1. This roms based on Samsung Stock roms
2. FULL Holo themed
3. I dont guarantee, that this rom will work perfect by all user
4. Always read the specifications
5. Dont send me PM, only its include develop thread
Click to expand...
Click to collapse
Follow Me on Twitter too
Thanx to:
Cm9 team
Codeworkx
Vertumus
Lidroid
Jkay
Sboulema
el_liberator
ficeto -status bar - modded by me
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SCREENSHOOTS FROM 3.0:
Click to expand...
Click to collapse
great mate! I was gonna do just that, you have just given me time
wow. well done. cheers
Made it a little easier for us, thanks. All the same, the current bug list (given this is quite literally VERY alpha) should be in the OP.
The really cool ICS transition animations also aren't present and nobody has managed to get rid of the red box developer setting either.
Too early still me thinks, but appreciate the effort.
Sent from my GT-I9100 using XDA App
did you keep the tw launcher? with it ics is very slow from what people saying. it would be nice when u keep update the rom when fixes come out or changing some more stuff with the cm9 launcher for example. thanks for your work ill download and try it out when the download link is there.
Thanks a lot. I hope you update this rom as ics leaks get better.
Sent from my GT-I9100 using xda premium
kickassdave said:
Made it a little easier for us, thanks. All the same, the current bug list (given this is quite literally VERY alpha) should be in the OP.
The really cool ICS transition animations also aren't present and nobody has managed to get rid of the red box developer setting either.
Too early still me thinks, but appreciate the effort.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
You have to use dev tools and change under Development Setting / Strictmode visual indicator to off reboot and it is done!!!
sansunggalaxys2 said:
Thanks a lot. I hope you update this rom as ics leaks get better.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes propably.
i hope the next ICS will be better.
Gunna give it a whirl, see what the fuss is about.
Does it contain CWM or will i need 2 flash a kernel with CWm?
wow and wow!
suuuuperb work mate! thanks
one Q:
is gallery working now?
and is it possible for you to remove all TW?
cheers,
SX
SignalX said:
wow and wow!
suuuuperb work mate! thanks
one Q:
is gallery working now?
and is it possible for you to remove all TW?
cheers,
SX
Click to expand...
Click to collapse
The galery works by me, and you can install an other tw.
After freeze the ics tw.
Hey !
What's the ondemand up_threshold value on this rom ? Have you change it ?
Thx !
this rom have CWM recovery mode?
Croxz said:
this rom have CWM recovery mode?
Click to expand...
Click to collapse
no cwm app but recovery mode included
First impressions. Not bad.
Obviousley not stable for dily use. Looks promising though!
Thanks for releasing a version with data working.
It was the only reason ICS wasn't a daily rom for me. (I don't use a lot of features)
Is it just me or does the battery get very hot when running this?
Sent from my GT-I9100 using xda premium
as soon as i restart phone superuser is lost...
Data doesn't work for me. Still stuck on the '3g' icon
Superuser seems ok after a reboot, I've installed the superuser from the market though?
chris4500uk said:
Data doesn't work for me. Still stuck on the '3g' icon
Superuser seems ok after a reboot, I've installed the superuser from the market though?
Click to expand...
Click to collapse
after reboot superuser was gone...installed from market rebooted gone again...3g works for me...do u use the kernel comming with the cwm or cf-root kp1/2
Hey there folks,
I'm a global moderator from MadTeam and working on the development of the ICS, first specialized just for Galaxy 5 and now is a great site for news and other cells and tabs development.
So, cutting the crap, this is the new page for the ICS for galaxy 5 on this site, and all the latest releases will be shared here. And here we go:
Thread Updated For Latest Release:
Alpha 3 released
Gapps revised by MadTeam
What is working:
. Audio
. SMS, MMS etc...
. Wifi
. Keyboard
In progress:
Camera and the good rest
How to Install ROM:
. Back Up your current stable ROM.
. Perform data wipe/factory reset.
. Go to Advanced and perform wipe dalvik cache
. Install the CM9 release.
. Install hotfix.
. Wait 5-10 minutes for first boot to complete (odexing).
Hotfix
UPDATE:
I fixed the issues with alpha 3 fixed and,
No orange flashs on the screen anymore, I've added a new kernel, framework and other things, so no need to install alpha 1 now
FOLLOW THE INSTALL GUIDE STEP BY STEP,
THIS IS AN ALPHA VERSION AND CAN EXPLODE YOUR PHONE
hy there. i download allmost all packages less then ics root package. i cannot access the file. can u reupload and paste the links. please.
DjSylvester said:
hy there. i download allmost all packages less then ics root package. i cannot access the file. can u reupload and paste the links. please.
Click to expand...
Click to collapse
Updated,
thx.
great! will glad to flash cm9 on my little brother's galaxy 5!
keep up the great job.
i have downloaded all the stuff except the root because of the fbi taking down megaupload. if it is possible to reupload to different site tnx
patsplantes said:
i have downloaded all the stuff except the root because of the fbi taking down megaupload. if it is possible to reupload to different site tnx
Click to expand...
Click to collapse
I would like that also
Thanks for this!
If you need help with testing the rom then send me a message whenever, my G5 is just collecting dust so I might as well get some use out of it, I honestly don't care if it breaks as the warranty has ran out anyway.
MrBC said:
I would like that also
Click to expand...
Click to collapse
patsplantes said:
i have downloaded all the stuff except the root because of the fbi taking down megaupload. if it is possible to reupload to different site tnx
Click to expand...
Click to collapse
Just click on the Wupload link
Thread update.
thanks for the update
but your download link at the end of first post is not working can you pls fix that
Tested
I didn't read the part about the exploding phone correctly or i would never have done it!
Startup was just the screen flashing bright yellow rapidly for about 30 seconds and then going dark. If you touched the screen or buttons then the display would activate and you can see it for a moment. I managed to get through the setup wizard to the main screen, the app drawer and access the rom manager app. Then rebooted into recovery from the home screen and restored my phone to cm7 1.9.
Amazing that i (on some level) had ics running on my phone Well done guys!
cmw was different too, it had a ***go back*** option at the bottom of each additional screen.
Exactly same here.
It have the *go back* button cuz is a cwm 5.2.7 based.
You must follow the guide correctly.
Chucky-PT said:
Exactly same here.
Click to expand...
Click to collapse
Does data not work for anyone else?
EoinSheehy said:
Does data not work for anyone else?
Click to expand...
Click to collapse
Data doesn't work in this version due to incompatibility with some European chips so mota disabled it
Sent from my GT-I5500 using Tapatalk
derrend said:
I didn't read the part about the exploding phone correctly or i would never have done it!
Startup was just the screen flashing bright yellow rapidly for about 30 seconds and then going dark. If you touched the screen or buttons then the display would activate and you can see it for a moment. I managed to get through the setup wizard to the main screen, the app drawer and access the rom manager app. Then rebooted into recovery from the home screen and restored my phone to cm7 1.9.
Amazing that i (on some level) had ics running on my phone Well done guys!
cmw was different too, it had a ***go back*** option at the bottom of each additional screen.
Click to expand...
Click to collapse
Thread updated no orange screen anymore.
installation problems
Installed the fix fine but clockworkmod displays an error when flashing mad rom apps. Had no problem with gapps previously so suspect fix.
derrend said:
Installed the fix fine but clockworkmod displays an error when flashing mad rom apps. Had no problem with gapps previously so suspect fix.
Click to expand...
Click to collapse
Definitive and tested Alpha 3 for Galaxy 5,
Storage access and new yellow boot animation included(New CM9 3d boot animation)
Permission to install Gapps working.
hyztname said:
Definitive and tested Alpha 3 for Galaxy 5,
Storage access and new yellow boot animation included(New CM9 3d boot animation)
Permission to install Gapps working.
Click to expand...
Click to collapse
It works but is no more usable than previous version of alpha.
We do all appreciate the hard work though hyztname so keep at it
What i want is to play with some new features and show off to my friends but i suppose that's what beta is for
Too impatient.
derrend said:
It works but is no more usable than previous version of alpha.
We do all appreciate the hard work though hyztname so keep at it
What i want is to play with some new features and show off to my friends but i suppose that's what beta is for
Too impatient.
Click to expand...
Click to collapse
Yeah you are right,
But we all have to start from the small part.
Thx for the appreciation.
Do not download! Currently I'm having some issues with FXP146 and my port isn't booting. Till I fix the problem,please enjoy your FXP146 by FXP team.
For UNLOCKED BOOTLOADER only!!
Instruction
Download the ROM here: http://www.mediafire.com/?g21re4tk7698xc2
Flash the ROM via Recovery
Flash Gapps here http://goo.im/gapps/gapps-ics-20120429-signed.zip
Wipe
Reboot,Enjoy
*If your statusbar is gone after the first reboot: longpress Powerbutton > Toggle Statusbar
If you want to Activate Tablet mode go to Settings > Paranoid Settings > Enable tablet UI
Please,no MIRROR for my ROM
Flash it at you own risk!
Changelog
JellyBean Flavored
Speed Improvement
New SU binary updated (via flashable zip)
New Fonts
Highlights
FXP146 base
Paranoid settings
Common Problems that user had :
1.error 7 ( I don't have the problem?) : extracted the rom.zip you download,flash the boot.img via fastboot.
2. Wifi issue (I never had the problem) : Do a full wipe after flashing the ROM.
3. fonts are too small : configure it by going into Settings>System>Font Size.
4. Wifi turned off when screen is off : (CM9 bug)
5. Apps like Viber doesn't work : Flash Gapps Again,go into Panaroid Settings>enable hybrid mode>list of apps google Play store>set it to default ui and default dpi,and finally,clear app data.
6. SuperUser issues : flash this after the ROM : http://www.mediafire.com/?n9z1i98lv1b1vzl thanks to XDA user Irseq
Bugs
Same as FXP146 (youtube video,camera,etc)
Everything else works
Don't forget to hit the thanks button..
Huge thanks to FXP
reserved
also reserved
This is awesome
I simply LOVE LOVE Paranoid Android, one of the best Custom ROMs ever!
Just google this. Looks AWESOME!!!!!
cant wait man.. cant wait... just this morning i saw it in XPU thread and was really jealous.... now we will have paranoida for our sola too.. thats great
So will there be an actual ROM? What's the use of opening an empty thread?
tinnef said:
So will there be an actual ROM? What's the use of opening an empty thread?
Click to expand...
Click to collapse
The port is completed
Now I have to maintain 3 devices,just so you know
Wait...That's an JB rom for Sola ?!
Charlus97 said:
Wait...That's an JB rom for Sola ?!
Click to expand...
Click to collapse
Mate, its based on FXP 146 which is still ICS, there is no JB for Sola yet.
Camera and Bluetooth working properly?
Sent from my MT27i using xda premium
Screenshot please
Is it OK to get stuck soooooooo long (more than 25 minutes) in bootanimation? ( I guess not )
My Experiments:
I just flashed it with it's own cwm (from boot.img in .zip file) it installed probably.
I installed gaaps and ok again.
when i was about to restart it says root access maybe lost would you mind to fix it?
I enter yes ... stuck
I flash again and enter no ... stuck
flash only rom but not gaaps ... stuck
BTW: I did wipe in every sections! to make sure it's cleen
looks like bootloop is in this rom
sijav said:
Is it OK to get stuck soooooooo long (more than 25 minutes) in bootanimation? ( I guess not )
My Experiments:
I just flashed it with it's own cwm (from boot.img in .zip file) it installed probably.
I installed gaaps and ok again.
when i was about to restart it says root access maybe lost would you mind to fix it?
I enter yes ... stuck
I flash again and enter no ... stuck
flash only rom but not gaaps ... stuck
BTW: I did wipe in every sections! to make sure it's cleen
looks like bootloop is in this rom
Click to expand...
Click to collapse
+1
sijav said:
looks like bootloop is in this rom
Click to expand...
Click to collapse
Same problem here.
The attached part of my logcat seems to be the recurring bit.
THANKS!!!
brendow96 said:
THANKS!!!
Click to expand...
Click to collapse
Did you manage to get it boot?
No
Do we need to flash boot.img of CM9 ? (I know that he rom isn't working for now)
Charlus97 said:
Do we need to flash boot.img of CM9 ? (I know that he rom isn't working for now)
Click to expand...
Click to collapse
yes of course
Send from my MayuSola (まゆそら)
MyFirstROM (Release Candicate)
I am proudly presenting to you my first ROM I have ever made.
NOTE:
Firstly i want so say, I am not responsible for bricked devices, dead phone, or you are getting fired because the alarm app failed. Install it at your own risk! . If you point the finger at me for messing up your device, I will laugh at you.
This ROM is based on 982.124.14.XT910.Retail.en.EU. It will not work on Droid Razr XT912 (CDMA) . Feel free to try this ROM. Any reports / comments about this ROM will be much appreciated.
Features:
Click to expand...
Click to collapse
-The ROM is fully deodexed.
-Fully zipaligned on boot
-Added some build.prop tweaks
-Added init.d support
-Rooted
-You can choose neitheir 4 launchers:
Galaxy S4 TouchWiz Launcher
Razr I Launcher
Stock ROM Launcher
Apex Launcher
-Internet speed tweaks
-VM management tweaks
-Battery tweaks
-Include Android 4.2 Camera
-4.2 Keyboard with gesture typing
-Updated these apps:
Youtube (4.4.11)
Playstore (4.0.2.7) with the new interface
Gmail (4.3.1)
Google+ (3-6-0-44338848)
Twitter (4.0.1)
-Added Greenify app, which will hibernate apps when the phone in sleep. This will save more battery
-Added busybox app
-Include Galaxy S4 Wallpapers
-Added more ringtones/alarms/notification sound
-Nano Text Editor installed
Bugs / Problems
Click to expand...
Click to collapse
1. Root access
How to fix: Install root from BMM.
2.Init.d support for tweaks
How to fix: Flash the zip file i've attached below.
How to in Install?
Click to expand...
Click to collapse
Make sure you have Boot Menu recovery installed. It will not work with other recoveries.
1. Download the ROM zip file
2. Make a backup first
3. Put the ROM file in SDCard or Internal Memory
4. Boot into the recvoery
5. Wipe cache, dalvik cache, factory reset and system/ROM
6. Install the zip file
7. Reboot
Thanks to
Click to expand...
Click to collapse
-Motorola: Jelly Bean update
-Al936: The OTA Stock ROM file
-optik19918
-pitchblack5691
-lokeshsaini94
-shakti15
-artur0588
-whirleyes
-dtrail1
I think i forgot someone, tell me
Tips for saving battery
Click to expand...
Click to collapse
-Go to settings > Wi-Fi > Hit the menu button > Advanced > Keep Wi-Fi on during sleep set to 'Never'
-Use the Greenify app
-Turn off mobile data when not in use
-Install BetterBatteryStats from PlayStore, you can know what cause the battery to drain
-Do not overclock your phone
-Use other governors and scheduler like Hotplug
-Try to undervolt your phone. I don't know whether it is working or not on this phone.
-Install JuiceDefender from PlayStore. It saves lots of battery. NOTE: This is not for heavy user, whom always turn on mobile data for example
How to install root from BMM
Click to expand...
Click to collapse
1. Boot to the recovery
2. Go to system keeper
3. Select install root
4. Reboot
5. Go to the Superuser app.
6. Swipe to the left.
7. Update the 'su' binary.
If you want more governor and io scheduler for CPU tweaks, see This thread
I've attached init.d installer script below which will enable tweaks i've added to this ROM. Thanks to [MENTION] whirleyes [/MENTION].
Link are now updated! (5/5/2013)
Download ROM (mega.co.nz) HERE
Mirror Link 1 (d-h.st)HERE
NEW Update 5/5/2013 - v0.91
Update: 28/4/2013 - v0.1 Alpha
-Initial release.
Update: 30/4/2013 - v0.2 - Alpha
-Allowed to add custom bootanimation.
-Now the ROM is fully deodexed.
-Added Nano Text Editor.
Update: 1/5/2013 - v0.21 Alpha
-Added the stock kernel, it may fix the bootloop issue (the last release i forgot to put the stock kernel during the build).
Update: 2/5/2013 - v0.8 - Beta
-Removed the kernel from the ROM to get rid of error during flash. I can't customize the stock kernel to get init.d tweaks due to a locked bootloader. i'll found a way to get the it.
Update: 5/5/2013 - v0.91 - RC1
-Changed the version to Release Candicate.
-Changed the ROM name to MyFirstROM.
-Removed several apps from the /system/app because the previous ROM file are quite large (about 490MB). I will debloat more apps in this ROM soon.
thanks, will try this rom.:good:
Don't forget to post the results!
Sent from my GT-I9300 using xda app-developers app
Looks awesome... maybe I'll give this Rom a try, and if I do, I post the results here.
Thanks dude!
Hi TheMrcool212,
I am trying to install this ROM with SS 3.11 on slot 2, but I get this error "Failed to write boot.img, aborting". Any clues?
savezia said:
Hi TheMrcool212,
I am trying to install this ROM with SS 3.11 on slot 2, but I get this error "Failed to write boot.img, aborting". Any clues?
Click to expand...
Click to collapse
try with BMM, SS cannot flash kernels (boot.img)
savezia said:
Hi TheMrcool212,
I am trying to install this ROM with SS 3.11 on slot 2, but I get this error "Failed to write boot.img, aborting". Any clues?
Click to expand...
Click to collapse
Hhhmm, i've compiled the ROM with the jelly bean EU kernel. Im very busy this week but i will looking for problems when i have time.
By the way, thank you very much for reporting.
Edit: i did'nt realize that heblu just replied. Added to the OP
Sent from my GT-I9300 using xda app-developers app
heblu said:
try with BMM, SS cannot flash kernels (boot.img)
Click to expand...
Click to collapse
Dear Heblu, dear TheMrcool212,
I imagined that was the issue, since this rom is based upon the Jelly Bean update from Motorola. Thank you so much! When and if I have time I will try with BMM and report!
Thank you again
can someone upload the rom to another link, the mega is too slow download v. with 12kb/s...
thank you in advance.
Lzto1320 said:
can someone upload the rom to another link, the mega is too slow download v. with 12kb/s...
thank you in advance.
Click to expand...
Click to collapse
I will upload it on other link soon, but not now.
Mirror link uploaded in the OP
i use bmm to install this rom, but it said abort, error, status 7.
by the way, this error not happened at the beginning installation, it shows when almost the rom flash done, then it says script error.
status 7.
Lzto1320 said:
i use bmm to install this rom, but it said abort, error, status 7.
by the way, this error not happened at the beginning installation, it shows when almost the rom flash done, then it says script error.
status 7.
Click to expand...
Click to collapse
I've checked the updater-script for errors using Android Kitchen, i got 6 errors. I am able to fix 2 of them. But can you post any shots/pictures so i can see it?
Edit: I think it is because i got no /system/usr/bin folder in the ROM.
Edit 2: i created a folder named 'bin' in /system/usr. It may fix during the flash. Now i am uploading it.
EDIT 3: The link is up at the OP
TheMrcool212 said:
I've checked the updater-script for errors using Android Kitchen, i got 6 errors. I am able to fix 2 of them. But can you post any shots/pictures so i can see it?
Edit: I think it is because i got no /system/usr/bin folder in the ROM.
Edit 2: i created a folder named 'bin' in /system/usr. It may fix during the flash. Now i am uploading it.
EDIT 3: The link is up at the OP
Click to expand...
Click to collapse
awsone man.
i will try.
Lzto1320 said:
awsone man.
i will try.
Click to expand...
Click to collapse
I think you're the only one who can help me test this ROM
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
I think you're the only one who can help me test this ROM
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
do not worry
there are many roms now, but when I have some time I will try it also, as many others I'm sure
thanks for this and don't give up
I'm ready to test your ROM, descriptions sounds brilliant, BUT! I can't do it. First release was with error 7. Second - with boot loop, so I can't test it, because I didn't see it. Go ahead! Great job!
can we install it on stock rom ?
e4f said:
I'm ready to test your ROM, descriptions sounds brilliant, BUT! I can't do it. First release was with error 7. Second - with boot loop, so I can't test it, because I didn't see it. Go ahead! Great job!
Click to expand...
Click to collapse
Thanks!!! I will do my best.
fusioncoast said:
can we install it on stock rom ?
Click to expand...
Click to collapse
Yes, you can install it on top of it. But i recommend you to install on other ROM slot. Like e4f said, it got a bootloop.
EDIT 1: I'm so sorry man!!, i forgot to put the stock kernel when building the ROM. i think thats the cause of the bootloop.
EDIT 2: The new release will uploaded with the kernel. Now the link is up.
We are the developers of AvatarROM .
We have upgraded the ROM to JB (4.2.2). Would anyone be interested to do a beta test.
Instructions:
If it's the first time flashing avatarrom or coming from another ROM
Before Flash Avatar ROM you need to install https://www.box.com/s/963cd9d1cf216e4e16e0 via CWM reboot recovery, and then install the ROM
Download link
Amazon S3
Gapps (4.2.2)
Feature request page - https://avatarrom.uservoice.com/forums/193652-avatarrom-feature-request
Reserved
The link is not working ! Can you tell us is everything is working in this ROM ??? And do we need ext4 partition ?
That is a link.
http://s3.avatarrom.com/Unofficial/2.12b/avatar-2.12b-0-20130531_UNOFFICIAL-passion.zip
I'm trying now, thank you Avatar Developers!
no a2sd.... no phone signal....WPA doesnt work....network autodetection doesnt work...with gapps it requires 330/6/100 and u hav to use m2sd...but i dont recommend using this rom now
@bippi79 we really need something like a2sd...
@arnab
You can use mini gapps like that
http://goo.im/devs/BaNkS/GApps/GApps 4.2.2 Minimal.zip
http://forum.xda-developers.com/showthread.php?t=2012857
It is only 8mb. I tried 250\10 without problem.
What is the sebaastin.zip?
I have been trying out Avatar on SGS2 and I am impressed especially by the themeing features and look to use the weebo also.
craagz said:
What is the sebaastin.zip?
Click to expand...
Click to collapse
its a custom hboot.zip which changes ur hboot partition. before doing that u need to install BLACKROSE. it would be better if the OP(BIPPI79) adds this hboot requirement details in the first post
Sent from my Nexus One using Tapatalk
fancyfree said:
The link is not working ! Can you tell us is everything is working in this ROM ??? And do we need ext4 partition ?
Click to expand...
Click to collapse
You can check now
So, after installing this and realizing my hboot was incorrect, I attempted to reflash to the slimrom I had before. Now, I'm stuck in a boot loop. I believe it has to do with the sebaastin.zip. How do I undo what that zip changed?
superGOAT said:
So, after installing this and realizing my hboot was incorrect, I attempted to reflash to the slimrom I had before. Now, I'm stuck in a boot loop. I believe it has to do with the sebaastin.zip. How do I undo what that zip changed?
Click to expand...
Click to collapse
flash the correct hboot for slim rom. wipe all first
Sent from my Nexus One using Tapatalk
Thanks for bringing new roms to the N1 :good:
Gonna test it, hopefully i will be able to install App2SD. Will report tomorrow or the day after to put my troughs :laugh:
Beware...it doesn't have that script...n ya BTW USB debugging is also broken....blackrose doesn't detect ADb means repartition doesn't work.
Sent from my Nexus One using xda app-developers app
[ROM][JB] Beta Testing for AvatarROM
almost all things doesnt work, is really really beta for the moment, thanks Avatar team!
n1newbie said:
its a custom hboot.zip which changes ur hboot partition. before doing that u need to install BLACKROSE. it would be better if the OP(BIPPI79) adds this hboot requirement details in the first post
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
What does it change it to? I know I can just try it, but with the things that don't work I'd rather just know what something will be changed to before I change it. I'm on Oxygen GB right now, but thinking of trying a 4.2 ROM.
bobbyphoenix said:
What does it change it to? I know I can just try it, but with the things that don't work I'd rather just know what something will be changed to before I change it. I'm on Oxygen GB right now, but thinking of trying a 4.2 ROM.
Click to expand...
Click to collapse
Its the zip from the hboot collection post for the old sebaastin ROM. I believe its 250/10.
Sent from my Nexus One using xda premium
question
what does it work? and what doesnt it work? add on post number one @bippi79 thanks!
I couldnt pass home screen, touch didnt work for me, i count press the "accept" button of the home screen tutorial.
xavys said:
I couldnt pass home screen, touch didnt work for me, i count press the "accept" button of the home screen tutorial.
Click to expand...
Click to collapse
check your hboot, thanks:good: