Not sure if anyone else has this problem, but when I restored my nook to stock using the 1.4.2 report image the touch screen didn't work. Does anyone else have this problem and know how to fix it?
Sent from Nook Tablet 8GB with CM10.1 iamafanof's build
Re: [Q] Touch screen not working for stock 1.4.2 report image?
You had 10 touch firmware installed on cm10? You should revert to 2 touch before returning to stock.
Sent from my ST27i
And the solution is to go back to CM10 and reflash original touch firmware, and then go back to stock.
satan89 said:
You had 10 touch firmware installed on cm10? You should revert to 2 touch before returning to stock.
Sent from my ST27i
Click to expand...
Click to collapse
What's the best way to do this without being able to touch the screen?
Do any of the Nook kernels support USB to OTG? If so I can try a USB mouse to manipulate the screen
Re: [Q] Touch screen not working for stock 1.4.2 report image?
No need for touch when using CWM. Install CM10 from CWM and you're back in business.
Sent from my GT-P7300 using Tapatalk 2
asawi said:
No need for touch when using CWM. Install CM10 from CWM and you're back in business.
Sent from my GT-P7300 using Tapatalk 2
Click to expand...
Click to collapse
Did that, touch screen stil doesn't work. Im pretty sure it's bad hardware. I have another thread open with the details of what i've tried. Feel free to take a peek.
Re: [Q] Touch screen not working for stock 1.4.2 report image?
Okay thank you the stock works now.
Sent from Nook Tablet 8GB with CM10.1 iamafanof's build.
asawi said:
And the solution is to go back to CM10 and reflash original touch firmware, and then go back to stock.
Click to expand...
Click to collapse
After weeks of fiddling ( I have no clue How I got here!) I think I got CM10 installed now How and where might I find the original Touch firmware to get my Stock touch to work?I have been working on this for almost 6 months! I know I should be on the short Yellow bus But SO help would be greatly appreciated. Thanks... OH I forgot to say please!
Re: [Q] Touch screen not working for stock 1.4.2 report image?
Most Cm10 builds come with the app installed.
Look. For app 'touchscreen firmware flasher '
Sent from my ST27i
satan89 said:
Most Cm10 builds come with the app installed.
Look. For app 'touchscreen firmware flasher '
Sent from my ST27i
Click to expand...
Click to collapse
I hate to sound slow but I guess I cant help it... So I tap that touch app and initiate it, is there anything that I need to know about how the touch firmware flasher works? IS it a toggle? Are there check boxes I have to tick? Sorry, But I kind of want to know what to expect... I have been going crazy to get to this point! Thanks again!
There are boxes to click to start the process. So it's not started automatically when you click the app, if that's what you're worried about.
asawi said:
There are boxes to click to start the process. So it's not started automatically when you click the app, if that's what you're worried about.
Click to expand...
Click to collapse
Well I am worried about clicking the wrong boxes and such... Is it self explanatory, is it intuitive? I lost the touch capability on the stock Nook and have been trying to get it back for about 6 months, forgive me if I am a little "gun shy". I just want to get it right and be done with it! Thanks!
:fingers-crossed:
Re: [Q] [Solved] Touch screen not working for stock 1.4.2 report image?
Depending on what build you have the firmware flasher might look a little different. All in all they all do the same. On the build I have there is only one button to push which will either flash stock (2 touch) or 10 touch.
For the touch screen to work on a stock Barns and Noble Tablet you need to flash it to stock (2 touch). If you already wiped to factory reset you'll have to re install CM 10. Then use the firmware flasher to return to stock. (There may be a simpler way but that is what came to my mind first.)
If you have any further problems send me a message or email me at [email protected]
Sent from Nook Tablet 8GB with CM10.1 iamafanof's build.
Related
shouldnt 329/330 be 4.0.4? Ive flashed both and they say 4.0.3
nightanole said:
shouldnt 329/330 be 4.0.4? Ive flashed both and they say 4.0.3
Click to expand...
Click to collapse
Are you using the OFFICIAL Nightly or an UNOFFICIAL.
If you watch the video, you see that mine is 4.0.4.
I can't wait to give this a shot. Been on the official CM9 for a whiles. Seems like progress is at a standstill with official releases.
Sent from my HTC PH39100 using xda premium
This build removed the WIFI issues that I had at work. W00t!
Have you ever used CWM Manager to go to CWM instead of the reboot menu?
It saves a couple of steps.
nightanole said:
shouldnt 329/330 be 4.0.4? Ive flashed both and they say 4.0.3
Click to expand...
Click to collapse
I did the same thing, but the unofficial is still 4.0.3 whereas the Official for March 29th is 4.0.4, so I will be switching to official builds now
Hi Rev. Have you heard of the "GooManager" app? It actually is a one-stop shop for unofficial, official and gapps files. If you want I can send you the apk to check out.
Sent from my cm_tenderloin using xda premium
I flashed this nightly but my notifications are messed up. When I have a notification in the bottom right corner, it just shows a blurry white box in place of the actual notification. I went back to Alpha 2 and this problem is not there. I'll stick to Alpha 2 for now unless there's a way to fix that.
shorty87 said:
I flashed this nightly but my notifications are messed up. When I have a notification in the bottom right corner, it just shows a blurry white box in place of the actual notification. I went back to Alpha 2 and this problem is not there. I'll stick to Alpha 2 for now unless there's a way to fix that.
Click to expand...
Click to collapse
Are you running any type of additional video drivers, such as Chainfire?
If so, you may need to reinstall them.
Or... it may be time to do a factory reset in Clockwork Recovery.
reverendkjr said:
Are you running any type of additional video drivers, such as Chainfire?
If so, you may need to reinstall them.
Or... it may be time to do a factory reset in Clockwork Recovery.
Click to expand...
Click to collapse
Nothing extra like that installed. I did do a factory reset in recovery but it still didn't fix that issue. Don't know what's causing it. Might try one time after I do a backup in recovery. Last time I forgot that I didn't have a backup :-\ .
Sent from my cm_tenderloin using xda premium
Currently running CM9 on my Photon, would like to go back to stock, have searched and havent really found to much.
Is there a guide for the simple minded among us (namely me) to go back to stock???
I have a feeling it's really simple and I am gonna feel silly for asking....heh
Boot into recovery,
hard reset X3
Reboot into rsd mode
Sbf back to stock
(you will have t to re root and unlock if you choose to after)
Sent from my MB855 using Tapatalk 2
Cm9 isn't as cracked up as they making out to be?
Sent from my MB855 using xda premium
It was pretty nice, but not all it's cracked up to be. A few things didnt work.
But the most annoying thing was it didnt seem to know it was on Sprint network.
It was nice, and I dont wanna crap on the hard work put into it..
It's acting kind of flakey, I wonder if re-flashing it would help, I might try that first then maybe go back to stock.....
Ive had very few issues with CM9 and ive followed it from the beginning Alpha stages.. Try a different version if you have issues. To each his own for sure some people will like others won't. I personally cant be taken away from it. Ive had VERY few network issues where it wouldn't connect and the not working items list gets smaller each day, its basically down to video camera in stock app and few other minor things. As for going back to stock if you need super detail check out QBKing77 on youtube, he has a video of exactly what to do.
I am currently running beta-0.1.0-2d-cm-9.0.0-RC0-Sunfire-KANG-signed, maybe I should just upgrade to beta-0.5.0-cm-9.0.0-RC0-sunfire-UNOFFICIAL-signed. If I do that, I pretty much follow the directions I did to flash the original correct??
Basically from about 3 minutes in on QB's tut video??
Cant post the link, but this one:
How to Install the Beta CyanogenMod 9 ICS Rom on the Motorola:
H0a3rySyJZA
Slagathor01 said:
I am currently running beta-0.1.0-2d-cm-9.0.0-RC0-Sunfire-KANG-signed, maybe I should just upgrade to beta-0.5.0-cm-9.0.0-RC0-sunfire-UNOFFICIAL-signed. If I do that, I pretty much follow the directions I did to flash the original correct??
Basically from about 3 minutes in on QB's tut video??
Cant post the link, but this one:
How to Install the Beta CyanogenMod 9 ICS Rom on the Motorola:
H0a3rySyJZA
Click to expand...
Click to collapse
When coming from previous cm9 build just wipe system in mounts and storage and flash thr newer build onto it via clockworkmod recovery.
Sent not from your device!
I will give that a try, I tried 3 or 4 times yesterday but it would get stuck on the M duel core screen.
Restored the back up I had and it was ok then.
EDIT:
No love yet again, I am using CWM 5.0.2.7.
It stops at the M duel core tech screen and just sits there.
Did you flash twice? If you don't, it bootloops.
Sent from my MB855 using XDA
ryan8r said:
When coming from previous cm9 build just wipe system in mounts and storage and flash thr newer build onto it via clockworkmod recovery.
Sent not from your device!
Click to expand...
Click to collapse
Do not wipe system when coming from a previous build. Wipe caches and fix permissions after you flash twice.
Sent from my MB855 using XDA
ICS Rom
The way i got that rom to work on my photon was to run the original rom, then go back and flash the most recent version, that worked perfectly for me!
I will give that a whirl after after work, thanks....
Finally, got it going, further reading figured out to flash the rom twice in a row, currently running 0.5.0, had to flash the CDMA fix to get the signal, running great, much smoother then the 0.1.0......
Thanks for all the help guys.....
braindeadracefan said:
Did you flash twice? If you don't, it bootloops.
Sent from my MB855 using XDA
Click to expand...
Click to collapse
I realise now what you meant by flash twice......
Has anyone had this working on stock JB, I use the nand restore that someone uploaded, then after getting my phone the way I like it ,apps etc I tried to install the chainfire 3D and it just hangs at boot, have to wipe data etc, and restore nand, tried this a few time with same result everytime
Anyone else tried it?
I am aware it says it not compatible with JB but it also says that for ICS and people say it works
Kickasskev said:
Has anyone had this working on stock JB, I use the nand restore that someone uploaded, then after getting my phone the way I like it ,apps etc I tried to install the chainfire 3D and it just hangs at boot, have to wipe data etc, and restore nand, tried this a few time with same result everytime
Anyone else tried it?
I am aware it says it not compatible with JB but it also says that for ICS and people say it works
Click to expand...
Click to collapse
Chainfire 3d will not work on jellybean. because all of the jellybean ROMS available are either leaked version of unofficial versions which are UNSTABLE versions. you will have to wait for the stable release of jellybean.
Those are NOT leaked versions.. google released JB sources for public .
Good thread. Was curious but thought it might of been the whole unstable thing.
Sent from my GT-I9300 using xda premium
Chainfire 3D will not work on JB as long as Chainfire will adjust the program, which, as I read in another threat will not happen soon as it is a lot of work (please correct me if I am wrong).
If you try to use Chainfire 3D on JB you will end up stuck on Samsung start screen.
Hence only way to use Chainfire 3D for now is use ICS.
Ics is only option as of now. What i m doing is dual booting ICS and JB. For games i boot into ics and play 9MM n nfshp n for rest things jb all the way
Sent from my GT-I9300 using Tapatalk 2
tested and it really doesn't work
Hi,
just to confirm, I made an attempt to install Chainfire3D on stock JB and as christmast wrote, it ended with a nand restore.
Hi im a noob and didnt read enough into this. I got sgs3 gt_i9300 and on jellybean rooted and made the mstake of not backing up Before installing. As a result im hanging at startup.
Please can anyone help in a direction of resolving this?
Please thanks
you wipe your data in recovery
I though official Chainfire3D support ended with Gingerbread?
It did.
Sent from my GT-I9300 using xda premium
hi again sorry if this is in the wrong thread
tryed wiping data in recovery and i had a tiny bit of progress.
no longer hanging on boot screen im now hanging at the samsung logo screen.
anyone got any ideas? or help im a bit of a noob sorry for late reply and thankyou
I tried it and had to reflash the kernel.
So, it's a no go.
Reflash kernel is that what i will have to do to get my device going again? If so how would i go about doing that? is There a guide on how to do it on here?i tryed plugging phone into laptop and carnt even get it to connect
Bunglemat said:
Reflash kernel is that what i will have to do to get my device going again? If so how would i go about doing that? is There a guide on how to do it on here?i tryed plugging phone into laptop and carnt even get it to connect
Click to expand...
Click to collapse
Flash your Rom again. Without wiping.
I have no rom can i download 1 and put on sd card to put through clockwork? I have no backups etc pritty stuck what to do
Bunglemat said:
I have no rom can i download 1 and put on sd card to put through clockwork? I have no backups etc pritty stuck what to do
Click to expand...
Click to collapse
Download roms, Use Odin. Check the link below for instructions.
http://forum.xda-developers.com/showthread.php?t=1671969
Sent from my GT-I9300 using xda app-developers app
got it thankyou so much a little question while im here. is it ok to update now back to jellybean? and root normally? thanks given to all
To the people locked out, simply flash a working recovery via Odin, pop a working custom ROM on your SD card and flash it.
Job done
Sent from my GT-I9300 using xda premium
Bunglemat said:
got it thankyou so much a little question while im here. is it ok to update now back to jellybean? and root normally? thanks given to all
Click to expand...
Click to collapse
While you're here.....
You're completely off topic; and your question have been asked 4456789 times on xda. Just do it.
My Nook Tablet is not responding to touch. I tried factory resetting it. It does look good when it's starting but when we get to the Welcome Lady where it asks to watch video or skip, we touch our selection but it doesn't respond. Is this a common problem that anyone has encountered before and if so, how did you go on about fixing it? Thanks.
Sv: [q] nook doesn't respond to touch!
Have you had CM10 installed on it? If so it's because you had multi touch installed and didn't un install it properly.
asawi said:
Have you had CM10 installed on it? If so it's because you had multi touch installed and didn't un install it properly.
Click to expand...
Click to collapse
Yeah, I really don't know what i'm doing with the tablet. I mean I'm familiar with rooting and flashing but that's on my Android phone.
mcarbaja said:
Yeah,
Click to expand...
Click to collapse
Make sd cwm, flash back to cm10 Rom, undo multi touch, then return to stock.
Sent from my ST27i
satan89 said:
Make sd cwm, flash back to cm10 Rom, undo multi touch, then return to stock.
Sent from my ST27i
Click to expand...
Click to collapse
How do I do both?
mcarbaja said:
How do I do both?
Click to expand...
Click to collapse
How did you get into cm10 earlier? Same way
Look for bootable cwm thread in development section
Sent from my ST27i
satan89 said:
How did you get into cm10 earlier? Same way
Look for bootable cwm thread in development section
Sent from my ST27i
Click to expand...
Click to collapse
We bought it like that! From some guy on Craigslist.
http://forum.xda-developers.com/showthread.php?t=2089371
Sent from my ST27i
Does anyone know if I can use option A from this thread http://forum.xda-developers.com/showthread.php?t=2081981 to uninstall the multi touch driver? When we bought it it didn't come with an sd card so I'm assuming CM10 was installed internally and I'm wondering if booting from the sd card will allow me to make the necessary changes to remove multi touch. Thanks
Sent from my SGH-T989 using xda premium
Give it a try! It won't hurt anyway and it's really easy!
TY!
satan89 said:
http://forum.xda-developers.com/showthread.php?t=2089371
Sent from my ST27i
Click to expand...
Click to collapse
Fixed yesterday and uninstalled the 10 touch firmware nevertheless we're still on CM10. Thanks for pointing me in the right direction!
I had installed 4.2.2 (after replacing the phone displays).
After the OTA update to to 4.4.2 does not work touch and context (bottom) button.
Is it possible to downgrade back to 4.2.2. or not - KNOX bootloader?
If your softkeys are not working properly go to your phone dialer and use this code *#0*# to run some test (touch,TSP hovering,sub keys) after this your softkeys should work but you will have to run these test every time you turn on your phone or after a reboot.
I got the same probleme.Any fix....
Please we need help
You can only control your phone through OTG mouse. ONLY the power, volume and home buttons working.
I tried to reflash and ten, the result is still the same.
In my opinion, is a bug in the ROM.
Temporarily I uploaded a CWM + this ROM - Dirty Unicorns - v7.8 : 20140702.
With this all works as it should, but I do not see this as a final solution.
ExEricss said:
You can only control your phone through OTG mouse. ONLY the power, volume and home buttons working.
I tried to reflash and ten, the result is still the same.
In my opinion, is a bug in the ROM.
Temporarily I uploaded a CWM + this ROM - Dirty Unicorns - v7.8 : 20140702.
ith this all works as it should, but I do not see this as a final solution.
Click to expand...
Click to collapse
Tanks i will try it
I've same problem guys,
I decide to downgrade to 4.2.2 or 4.2.1
hope to work. but if u find any solution please share...
I have learned that with the att mega if you have had a replacement screen 4.4.2 will not boot properly. If you replace the lcd with the oem at&t brand digitizer specific lyrics for the i527. It will work but it must be i527 lcd digitizer. I read this in a repair forum. If I can find it again I will post the link. As of right now I am currently booting up with original att lcd and swapping the lcd cable after the boot. Its the only way i can get the phone to not bootloop, and get touch on 4.4.2. It was running 4.2.2 fine. As soon as i did the update. It started. I sure hope someone knows of a way to get the replacement digitizers to work on the i527. Hope this info helps.
Sent from my SCH-R950 using XDA Free mobile app
Mine boots but the touch doesnt work after the kk update and cant go back to jb hopefully soon
[email protected] said:
I have learned that with the att mega if you have had a replacement screen 4.4.2 will not boot properly. If you replace the lcd with the oem at&t brand digitizer specific lyrics for the i527. It will work but it must be i527 lcd digitizer. I read this in a repair forum. If I can find it again I will post the link. As of right now I am currently booting up with original att lcd and swapping the lcd cable after the boot. Its the only way i can get the phone to not bootloop, and get touch on 4.4.2. It was running 4.2.2 fine. As soon as i did the update. It started. I sure hope someone knows of a way to get the replacement digitizers to work on the i527. Hope this info helps.
Sent from my SCH-R950 using XDA Free mobile app
Click to expand...
Click to collapse
This also apply to the r960 mega. Bought lcd digitizer specifically for it and works fine with 4.4.2
sent from my M E G A . . . >((((((●)(●)
drendoral said:
i've same problem guys,
i decide to downgrade to 4.2.2 or 4.2.1
hope to work. But if u find any solution please share...
Click to expand...
Click to collapse
how did you downgrade
vazersecurity said:
how did you downgrade
Click to expand...
Click to collapse
Go to live.samsung-updates.com/index.php?device=GT-N5100 to download the version u want, then flash ur tab with Odin
Will try this
vazersecurity said:
Will try this
Click to expand...
Click to collapse
It says GT-N5100 on the link which is Galaxy Note 8.0. May not be for our Mega. Proceed with caution.
Sent from Google Nexus 4 @ CM11
[WARNING: XDA Premium 4.0.13 lacks Signature function - do not update]
Yeah. I noticed. I didn't even try. I couldn't find anything.
I loaded CWM and installed the zip from the sd card. They say you cant go back. But I did. But mine was rooted before. Dont if that makes the difference or not. I hadn't tryed the dirty unicorn mod yet buti will wheni get time.
Sent from my SPH-L600 using XDA Free mobile app
drendoral said:
Go to live.samsung-updates.com/index.php?device=GT-N5100 to download the version u want, then flash ur tab with Odin
Click to expand...
Click to collapse
You loaded a galaxy note 8.0 firmware on the galaxy mega?
Sent from my SM-N900V using XDA Free mobile app
http://forum.xda-developers.com/galaxy-mega/help/galaxy-mega-screen-stopped-upgrade-to-t2863891 <-- Try this
Replaced touch screen does not work in 4.4.2
ericss said:
I had installed 4.2.2 (after replacing the phone displays).
After the OTA update to to 4.4.2 does not work touch and context (bottom) button.
Is it possible to downgrade back to 4.2.2. or not - KNOX bootloader?
Click to expand...
Click to collapse
I have same problem too....
Downgrade is horrible! but it can by box... after downgrade to 4.2.2 my baseband had gone left and several days tried to restore my IMEI and WIFI... and later install a new unofficial ROM, like slimkat and cyanogenmod. and I don't know how to downgrade to 4.2.2 by WIFI Fixed or my touch screen work correctly in 4.4.2 kitkat...