How to mount internal SD with a Dead screen!? - Galaxy S II Q&A, Help & Troubleshooting

My SGS 2 screen is done for. The phone still boots up and responds normally otherwise.
I am running a Gingerbread 2.36 Siyah Kernel on it.
How do I get my data of the phone by mounting the Sd card?
Maybe someone who has this kernel can tell me what to blindly press after holding Vol Up plus power to get to the mount internal SD menu.
Thanks!

try me' said:
My SGS 2 screen is done for. The phone still boots up and responds normally otherwise.
I am running a Gingerbread 2.36 Siyah Kernel on it.
How do I get my data of the phone by mounting the Sd card?
Maybe someone who has this kernel can tell me what to blindly press after holding Vol Up plus power to get to the mount internal SD menu.
Thanks!
Click to expand...
Click to collapse
Lol, its not that easy as said by u, 'Will Try closing my eyes and walk in the midst of a Heavy Traffic and see what happens'.
Either replace ur screen (either by paying or warranty claim) if not take it to a nearest service center and see what best they can do for u

If you want the stuff from the card, remove it and use a card reader. If you want the stuff from the internal storage, this gets tricky....
Get your phone to a service center and specifically tell that they need to just replace the faulty screen. So no JB updates, motherboard replacement or wiping the device clean.
Sent from my digital submersible hovercraft.

Really guys? Take it to a service centre? I already knew that.
I don't have the money to take it into a service centre. Phone is out of warranty.
Replacing screen costs money too. About $300 in Australia, may as well buy a new phone.
Actually if I boot into recovery the phone is already rooted etc it is that easy.
All i need to knwo is volume up down power, up, power etc.
Or there was some android app windows sdk where you simply mnt/sdcard etc while connected to USB.

What recovery is on there? If it's cwm non touch let me know and I'll give you the sequence of keys
Sent from my HTC One X using xda app-developers app

jsimmo said:
What recovery is on there? If it's cwm non touch let me know and I'll give you the sequence of keys
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I'm not exactly sure but it the one after installing Darky rom HD gingebread, Or as its now called alliance rom V1.1 Ginerbread.
I just installed the latest GGB compatible Siyah Kernel on top of it and thats it.
It is non touch. Not too many menus, maybe 6.

Im looking at galaxyforums.net/forum/galaxy-s2-help/6232-screen-cracked-need-recover-very-important-data-2.ht m l
They have a command line to get to the sdcard via ABD but I have no idea how to open the ABD command promt

try me' said:
Im looking at galaxyforums.net/forum/galaxy-s2-help/6232-screen-cracked-need-recover-very-important-data-2.ht m l
They have a command line to get to the sdcard via ABD but I have no idea how to open the ABD command promt
Click to expand...
Click to collapse
That sounds like a better idea. Mashing around blindly in recovery seems pretty risky to me, especially if you're not sure what version you have. Unfortunately I don't know the first thing about ABD either, sorry. Good luck.

I just plugged in the phone to samsung kies, and it detects it just fine, but it says to set the phone to USB samsung kies mode and it doesnt support this mode. ATM I am in USB debug mode.
Surely there is a progam that acceses the phone via debug mode?
OR even via Download mode?
I am giving this Android SDK a go, holy crap it is so complex. I installed some packages, double clicked on ABD under sdk>platform tools, and a command prompt window comes up, a bunch of text flies by in 1 second and it automatically closes..

What android version and are you windows or Mac?
Sent from my HTC One X using xda app-developers app

jsimmo said:
What android version and are you windows or Mac?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Gotta say this community is just abysmal at handing out help.
To the dude above asking what android version. Read the OP before spending time asking a useless question. I said 2.36. And windows or mac...? Do you really think I would not find be willing to use either if there was a way to recover my data.
If anyone is interested here is how I solved my problem, this simplest method could not simply be mentioned here?
I turned my phone on. Let it boot. Then I plugged in the USB cable from the computer. The phone should register the connection either via vibrate or noise, and in "my computer" the drives show up but are inaccessible by windows explorer, or kies because USB debugging is On.
go to google play store via your browser, preferably chrome. search for a a program called My phone explorer. Select install. It should install it to your phone. Look in the description and install the PC side of the software on your PC.
Open "my phone explorer" on your pc and voilla should be able to sync
I only wish someone could tell me this instead of having to fluke it on my own

Related

No luck rooting at all!!

This is kind of a rant so bear with me. Got me phone a few days ago, tried to root but found out it was hardware locked from factory. Took it back, they exchanged it, got home and tried to root again... and still hardware lock. So some nice people on here suggested a different method that doesnt involve being able to manually boot the phone into recovery. So I worked up the nerve and downloaded all the drivers, the root file, windows net4, blah, blah blah. I go to open the root file and it wont open. When I right click on it and try to open it the save or run window just keeps popping up no matter what I do. Now IM at a loss, guess Ill just wait for Samsung to release the patch for the hardware lock. Sorry for the long post, Im just frustrated!!
Put your phone into USB-debugging mode, but DONT mount the phone. Then plug it into the computer, install the drivers, and run this program.
http://forum.xda-developers.com/showthread.php?t=739300
Whart do you mean by moubting the phone? Thats the method Ive been trying to use, but I cant get the files open.
I tried rooting my friends phone yesterday, and for some reason, his phone automatically mounted when connected via USB. If its mounted, ADB cannot push the necessary update.zip file to the phone.
GreggoryD502 said:
This is kind of a rant so bear with me. Got me phone a few days ago, tried to root but found out it was hardware locked from factory. Took it back, they exchanged it, got home and tried to root again... and still hardware lock.
Click to expand...
Click to collapse
Take it back again..tell them that you can access recovery mode. Tell them its important to have this function because if for some reason android screws up and you're not able to access your phone to restore you can always run recovery to restore
Ask for one with an august date on the sticker and test it there.
Its a defect and huge headache for you not being able to access recovery.
I exchanged my unlocked vibrant yesterday for other reason and i had them check before i exchanged.
I explained the whole issue with faulty phone with issues accessing recovery.
He went out back came back with one and tried to accessing recovery and couldn't. they only had one other one with the same September date..didn't even try.
So he called a friend of his at a the mall location and he asked him if he had any with the august date. He only had one and he asked him over the phone to test it and see if he could access recovery, and he was able to....long story short return it they will test before you take new phone home and make sure its from august, not september
Wow. The 2nd phone they gave me was a Sept 1 date!!
So unless I return it, rooting pretty much isnt an option!!??
GreggoryD502 said:
Wow. The 2nd phone they gave me was a Sept 1 date!!
Click to expand...
Click to collapse
yea the one he tried and didn't work was from sept.
the unlocked one i returned and new unlocked were both from august
GreggoryD502 said:
So unless I return it, rooting pretty much isnt an option!!??
Click to expand...
Click to collapse
It is but more of a hassle, also note i edited my 1st post.
Also if they dont have any with an august date see if they can call another local tmobile and ask.
I guess ill just wait for a fix or something. Ive already taken one back.
GreggoryD502 said:
So unless I return it, rooting pretty much isnt an option!!??
Click to expand...
Click to collapse
Wow did you even read the link I posted? I don't see how it can be easier than clicking a button on the computer, but suit yourself. I rooted 2 locked vibrants this way.
richan90 said:
Wow did you even read the link I posted? I don't see how it can be easier than clicking a button on the computer, but suit yourself. I rooted 2 locked vibrants this way.
Click to expand...
Click to collapse
Wow, did you even read my original post?? The root file wont open or let me save it. No matter what I click, (save or run), it wont do either. The save or run window just keeps comimg up.
Did you make sure that you are running the program as administrator?
hukkguai said:
Did you make sure that you are running the program as administrator?
Click to expand...
Click to collapse
Yes Im the admin on my computer.
GreggoryD502 said:
Yes Im the admin on my computer.
Click to expand...
Click to collapse
What OS are you running? I'm currently on Vista as an admin and I (STILL) need to set some programs to run as admin and in xp compatibility mode (because Vista is total crap).
GreggoryD502 said:
Wow, did you even read my original post?? The root file wont open or let me save it. No matter what I click, (save or run), it wont do either. The save or run window just keeps comimg up.
Click to expand...
Click to collapse
When you have your usb plugged in, check the notification bar. It should say usb debugging mode and "click here to mount usb" or something along those lines. This means you are not mounted. If that still doesn't work, try getting the update.zip and manually place it at the root of your sd. Then download clockwork recovery from the marketand use that to reboot into recovery to flash the root file.
Sent from my SGH-T959 using XDA App

[Q] Android malfunction...

Now, first and foremost, Hello to the XDA community and this would be my first post. I am having issues with my Xperia Neo V and I can't find a solution for it.
I admit that this is a stupid mistake on my end so let me start my story and I am hoping to get some assistance from a reputable community such as this.
I was installing some games via Google Play and I realized that my phone's internal memory gets full kinda fast as it is where files are saved by default. So, the genius me, tried to remove some stock apps that may contribute to useless disk space using Titanium Backup. All went well and I deleted a couple of stuff and it worked fine then I decided to restart it to factory settings (without doing backup which I regret up until now). I had several malfunctions after it rebooted again:
Whenever I am trying to go to phone book, I am unable to just press the number to make a call. I need to select edit contact first before calling
The middle button (the one with a house Icon, probably called Home Button, does not respond at all so I having a hard time quitting apps
the worst part, I am unable to connect the phone properly using USB. What happens is that when I plug the USB, the charging symbol on the battery bar shows it's charging (like plugged to a wall jack) but the computer does not show anything, regardless if it's Media transfer mode or Mass Storage mode (mass storage shows an empty drive in My Computer). I tried using other usb cables and other memory cards and apparently, it does not work. Other USB cables that works on other xperia neos yeild the same result.
What I was planning to do initially is to update the firmware (currently on 2.3.4), but updating via WiFi shows it's updated, and using the PC Companion does not work.
I know I deleted something that I should not and I'm at a loss. Later, I will attempt to connect my phone in the PC Companion to try and update it to ICS connecting it to my private wifi. Hopefully it would do the trick.
Another work around that Im thinking is to look for someone that does have a backup of the apk files so that I can restore them again in my phone.
Can anyone please assist me on this? T_T
I recommend connecting the device to your PC companion and using the repair option. If that doesn't work, try flashing a stock ROM from either Wotan or get one somewhere from these forums (I'm sure there were a few in the development section)
Good luck
Sent from my Sony Xperia Neo using xda app-developers app
Or you can use this list - http://forum.xda-developers.com/showpost.php?p=19772266&postcount=1 to identify which apps you need to get restored.
Sent from my Sony Xperia Neo using xda app-developers app
Why don't you just flash an orginal rom (.ftf)?
http://forum.xda-developers.com/showthread.php?t=1678690
And then (after you get what you deleted) you just need to get them into your phone. If you were able to uninstall it, you!re having root. So send it to the phone via bluetooth or download from somewhere via wifi (if the USB doesn't work as you told) and using some file explorer move it to their directory and reboot. I think it should work
petulinka1 said:
And then (after you get what you deleted) you just need to get them into your phone. If you were able to uninstall it, you!re having root. So send it to the phone via bluetooth or download from somewhere via wifi (if the USB doesn't work as you told) and using some file explorer move it to their directory and reboot. I think it should work
Click to expand...
Click to collapse
~i have no problem putting files into the memory card at all, the issue is that the PC itself does not recognize the phone at all. Thanks for the insight!
BluesRebel said:
Why don't you just flash an orginal rom (.ftf)?
http://forum.xda-developers.com/showthread.php?t=1678690
Click to expand...
Click to collapse
~i want to try this but as I am a noob for this stuff, im still sorting up how to start hahah, may you be so kind to point out to where I should start like a tut or something
venoma333 said:
Or you can use this list - http://forum.xda-developers.com/showpost.php?p=19772266&postcount=1 to identify which apps you need to get restored.
Sent from my Sony Xperia Neo using xda app-developers app
Click to expand...
Click to collapse
~I was trying to install whatever missing app from my list,but there is a lot of them...but i think flashing it would be my best bet.
venoma333 said:
I recommend connecting the device to your PC companion and using the repair option. If that doesn't work, try flashing a stock ROM from either Wotan or get one somewhere from these forums (I'm sure there were a few in the development section)
Good luck
Sent from my Sony Xperia Neo using xda app-developers app
Click to expand...
Click to collapse
~sir...I cant find where that repair option is..
~by the way, the wifi option to connect looks pretty useless, it seems that you need to connect via usb on the "pairing" stage...
Ok here's my idea. Get any stock based rom from the dev page (there's a list in the sticky posts) and male sure it's the proper version. Then download the zip file and open it up. Find system/app or system/data/app or something similar inside the zip. Then simply copy and paste the apps from there to your phone, and don't forget the proper permissions.
Sent from my Sony Xperia Neo using xda app-developers app
Hi
Welcome to XDA!
Did you try repair your phone with SUS( Sony update service)?
Sent from my MT15a using Tapatalk
GODice said:
~i have no problem putting files into the memory card at all, the issue is that the PC itself does not recognize the phone at all. Thanks for the insight!
Click to expand...
Click to collapse
If you can put the files into SD card, then use whot venoma333 says and do it through SD card - you can move a lots of files together (for example using ES file explorer).
Or you can try to connect your phone to S(E)US or Flashtool. If it would work, that will be the best for you And I think, that in PCC is some option to "re-flash" your phone (like somebody told here). On the top it says if your phone has the newest firmware version or not. Click on on it and you'll get a window with reapair option
Ok, I'm going to attempt to flash and I reached the xperia website (unlockbootloader.sonyericsson.com/instructions), and based on the instructions, I checked if "Bootloader unlock allowed" is set to yes, unfortunately, my phone says no.. Can I still continue the process??If not, is it still possible to do manual firmware update without unlocking the bootloader?
There is no need to unlock bl for flash process. So forget that page, for now.
You mentioned pc companion, what happens when you start pc comp. and connect your phone(turned on)?
If it doesn't connect to pcc, go to device manager on your pc and tell me how is your phone named there and does it have yellow ! mark next to it?
This is the last thing that I think could possibly work, does anyone know an android 2.3.4 iso nandroid? I think that's the best way to do it for now..I am unable to do the hold back button while restarting, does not work for me
Madfysh said:
There is no need to unlock bl for flash process. So forget that page, for now.
You mentioned pc companion, what happens when you start pc comp. and connect your phone(turned on)?
If it doesn't connect to pcc, go to device manager on your pc and tell me how is your phone named there and does it have yellow ! mark next to it?
Click to expand...
Click to collapse
Nothing happens in PCC, it will show that no devices are found. In DM, it shows:
-Sony Ericsson sa0102
|_Sona sa0102 ABD Interface driver
I was trying to update it using PCC, it recognizes the device after I mount the memory card.
What I have done, I restored the system using CWM using this link:
http://forum.xda-developers.com/archive/index.php/t-1630348.html
It worked, however, since the carrier and model brand is not the same, I was unable make my sim card/carrier to work.
My hope now is to get an ISO file for android version 2.3.4 which is from a generic phone. I live in the Philippines and my carrier is SMART telecommunications.
Apparently, the update from the link is for a Verizon phone
If you want alot of space, use a small ROM. Alot of devs have come up with stock Xperia GB ROMs that are easy on memory. To fix, You'll need to flash the entire phone with a stock ROM. Then flash a custom ROM. Besides that, you do know you can transfer apps to SD.

Help phone is super bricked!

I need help. My htc amaze 4g is rooted and I have s off and super cid and i was running on android revolution hd rom, an app by the name of root mobile odin pro was installed on my phone, it was attempting to create a dump file so that I could give it to the dev so that he could possibly make my cell phone compatible with the app. But now my phone will no longer power on, it does not charge, no led light, the battery is full, has sd card, no sim card. under device manager on windows 7 it comes up as QHSUSB DLOAD. Will not run into recovery mode when vol down and power button is held. Computer does not recognize it. Can not run adb in cmd prompt, no reboot command works because device can not be found. I've tried to do everything on unlimited io page to no avail. When I do connect the phone to the PC it does make a sound to inform me that I just connected it. But the screen remains black and the light remains off.
I am using the UNBRICK PROJECT THAT IS ON http://forum.xda-developers.com/showthread.php?p=25501116
I AM ON UBUNTU BUT WHEN I TYPE IN
./brickdetect.sh
INTO THE TERMINAL IT DOES NOT DETECT MY DEVICE
Please help!
Sincerely,
Desperate Soul
Can you boot into fastboot? Battery pull, replace and Vol Down + Power
I can't
Double0EK said:
Can you boot into fastboot? Battery pull, replace and Vol Down + Power
Click to expand...
Click to collapse
No I can not
what recovery? and have you tried a different battery?
my recovery is...
andy55 said:
what recovery? and have you tried a different battery?
Click to expand...
Click to collapse
Recovery: 4ext
and my bf has the same phone, I tried his full battery, no response, when plugged in no led light to confirm it's charging.
jlnive said:
I need help. My htc amaze 4g is rooted and I have s off and super cid and i was running on android revolution hd rom, an app by the name of root mobile odin pro was installed on my phone, it was attempting to create a dump file so that I could give it to the dev so that he could possibly make my cell phone compatible with the app. But now my phone will no longer power on, it does not charge, no led light, the battery is full, has sd card, no sim card. under device manager on windows 7 it comes up as QHSUSB DLOAD. Will not run into recovery mode when vol down and power button is held. Computer does not recognize it. Can not run adb in cmd prompt, no reboot command works because device can not be found. I've tried to do everything on unlimited io page to no avail.
I am using the UNBRICK PROJECT THAT IS ON http://forum.xda-developers.com/showthread.php?p=25501116
I AM ON UBUNTU BUT WHEN I TYPE IN
./brickdetect.sh
INTO THE TERMINAL IT DOES NOT DETECT MY DEVICE
Please help!
Sincerely,
Desperate Soul
Click to expand...
Click to collapse
What did you do with the app? Did you attempt to flash ANYTHING on the phone? Sounds like you did however and messed up with one of its internal partitions.
EDIT: I'm going to go ahead and say you bricked your phone. I just re-read and... Why would you install something meant for *SAMSUNG* phones, on a *HTC* phone? You messed up right there. The unbricking project only will unbrick HTC Amazes when they're bricked in a certain fashion. It specifically states that it is known to be working for "writesecureflag 3" type of bricks. You could try and see if it will work in your case, but it probably won't. More likely than not, with the app you used, you might have accidentally wiped a partition that would have been safe for samsung devices (but dangerous on HTC devices).
Like he said ^^^ anything odin is for Samsung... u now have a nice coaster
Sent from my Wicked Galaxy S III
devestated
Keylogger_0 said:
What did you do with the app? Did you attempt to flash ANYTHING on the phone? Sounds like you did however and messed up with one of its internal partitions.
EDIT: I'm going to go ahead and say you bricked your phone. I just re-read and... Why would you install something meant for *SAMSUNG* phones, on a *HTC* phone? You messed up right there. The unbricking project only will unbrick HTC Amazes when they're bricked in a certain fashion. It specifically states that it is known to be working for "writesecureflag 3" type of bricks. You could try and see if it will work in your case, but it probably won't. More likely than not, with the app you used, you might have accidentally wiped a partition that would have been safe for samsung devices (but dangerous on HTC devices).
Click to expand...
Click to collapse
*** I am so devastated, my cell phone was so valuable to me. Can't believe I was so senseless to make such an error as this. The app was for Samsung but the app said it could create a dump file so that my device would become compatible . But that sounds so stupid to me now . A little too late. I'm so sad. I wish there was some way to fix it. Wish there was a USB jig for HTC's.
IF YOU KNOW OF ANYTHING, ABSOLUTELY ANYTHING THAT MAY HELP PLEASE LET ME KNOW!!!!!!!
(Thank you for all the reply's)
IT happens
Hey it happens, that how we learn thing sometimes, and sometime it can cost us. You could try these things
1) See if it can be JTAGed (cheapest possibility)
2) If it's still under warranty (which it probably isn't) send it off, and say it wouldn't power on after a update.
3) Find a Amaze with a broken or cracked screen, and replace the motherboard yourself.
That's all I can think of. Good luck

Win 7 won't recognize

I rooted my lg on my computer, but I have not connected it since. Everytime I try, it says it does not recognize , that one of the USB devices has malfunctioned. I have installed the lg USB driver 3 different times and still can't get it, I have tried all 5 USB ports I have, same thing. Any ideas
Sent from my LG-E970 using xda app-developers app
I tried restoring to before my first lg driver install, reinstalled driver software, still same error
Sent from my LG-E970 using xda app-developers app
Have you uninstalled the drivers?
If not, with the phone plugged in, go to device manager, find the device, uninstall it, unplug and then replug in your phone.
Yes I did, I'm very computer literate. Turns out a cable can't tell you its bad, the original cable seem to be the problem. Probably why sometimes I get slow charge when plugged into the wall. All may be null and void when I attempt n4 conversion lol , wish me luck!
Sent from my LG-E970 using xda app-developers app
Good luck. I recommend having LGNPST prepped to revert to stock, with the DLLs and the BIN/TOT version of the LG ROM. AFAIK, that's the only way to get back, because of how extensive the N4 conversion is. Reverting with a ZIP ROM in CWM is unlikely to work.
Yah , I think I'm going to give up on trying, between the cable thing, now I can only talk to my phone through adb, fast boot won't seem to work. Plus I can't find a lgnpst guide anywhere for our phone. No idea where to get the DLL I'm supposed to flash with, nor where to get the files to flash back. This is my first lg, I've been a HTC guy, so I know nothing about lgnpst. Thanks though
Sent from my LG-E970 using xda app-developers app
ripbabey said:
Yah , I think I'm going to give up on trying, between the cable thing, now I can only talk to my phone through adb, fast boot won't seem to work. Plus I can't find a lgnpst guide anywhere for our phone. No idea where to get the DLL I'm supposed to flash with, nor where to get the files to flash back. This is my first lg, I've been a HTC guy, so I know nothing about lgnpst. Thanks though
Click to expand...
Click to collapse
The Windows 8 guide works (even if you're in Windows 7):
http://forum.xda-developers.com/showthread.php?t=2013067
Step 5 refers to a folder in a zip file that you get a link to in IRC.
When you go into irc an you !info lgnpst click on other versions and get phantomphreak53's
Click to expand...
Click to collapse
That's the #lg-optimus-g channel on Freenode.
Yes, the DLL refers to "LS970," but it works fine with the E970.
To obtain the files listed in the first four steps, I just Googled them and found Dropbox links.
The TOT/BIN file in question would be this one: http://forum.xda-developers.com/showthread.php?t=1984545
It will take a while to download; the server appears to average 100 KB/s.
As you can seee, it's kind of a pain to set up LGNPST's environment correctly. I recommend taking all of those files and backing them up to a secure location, so that you never need to hunt them down and re-download them again.
The guide also doesn't mention that your phone needs to be in Download Mode to interact with LGNPST. This is achieved by turning the phone off, plugging it into your computer with a USB cable, then holding down the power button and both volume buttons at the same time until the Download Mode indicator shows up on your screen. It may take several attempts; the process appears to have a low tolerance for poor button press timing.
LGNPST will interact with your phone even if Windows no longer recognizes it. I think that's why it remains popular as a last-resort recovery method.
ripbabey said:
Yah , I think I'm going to give up on trying, between the cable thing, now I can only talk to my phone through adb, fast boot won't seem to work. Plus I can't find a lgnpst guide anywhere for our phone. No idea where to get the DLL I'm supposed to flash with, nor where to get the files to flash back. This is my first lg, I've been a HTC guy, so I know nothing about lgnpst. Thanks though
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Everything you need is on Team Nocturnals website where the conversion thread is minus lgnpst and the nexus 4 drivers.
After you flash the n4 conversion, boot in recovery and then install the nexus 4 universal naked drivers (Google it, should be the first xda link.) Then you can use adb to fast boot -w and flash a recovery. Just read a little more and you'll realize its not hard at all. Just make sure everything is prepared. Good luck if you try it. It was very interesting to me. I've gone back to stock and came back to the conversion after the sdcard fix
Sent from my Nexus 4 using xda premium
Right now the problem I am having is getting windows to recognize my phone in boot loader/ fast boot which will prevent me from being able to fastboot -w , I have a thread on here should be titled fast boot and recovery. Posted it last night. I'm trying to make sure everything is ready, but my phone and my PC are just trying to fight me every which way lol. I'm going to try another computer and see if things run smoother, I have rooted and unlocked a bunch of phones for friends and myself on my laptop. Wondering if I'm just having a lot of driver conflicts lol
Its not about what you know , but who you know.
You might need to flash your recovery, and possibly lock your bootloader again. What I have seen over my several rooted phones is that sometimes when unlocking them, the binary code doesn't match up and will not allow the battery, USB port, and even screen to work with the software. Won't matter if you unistall or reinstall the drivers. Hope this help!
Sent from my HTC One V using xda premium
WizzyCreator said:
You might need to flash your recovery, and possibly lock your bootloader again. What I have seen over my several rooted phones is that sometimes when unlocking them, the binary code doesn't match up and will not allow the battery, USB port, and even screen to work with the software. Won't matter if you unistall or reinstall the drivers. Hope this help!
Sent from my HTC One V using xda premium
Click to expand...
Click to collapse
Which software are you describing? I have not lgnpst 'd anything yet, it does notice my phone both with phone on and connection settings to lg software, and in download mode. The problem I am currently stuck on is getting my PC to notice my phone in boot loader so I can't use any fb commands. I can talk to my phone when its on through adb commands no problem.
I dont want to get in trouble, the original problem was I could not get windows to notice my phone at all. I fixed that by trying a different USB cord, apparently my original is failing. If you would like to help me more so I don't get yelled at, please post in my other thread titled fast boot and recovery in the qa thread. I really want to attempt this, its my bday. So it would be a awesome little bday present to my flashaholic self
Its not about what you know , but who you know.
ripbabey said:
Yah , I think I'm going to give up on trying, between the cable thing, now I can only talk to my phone through adb, fast boot won't seem to work. Plus I can't find a lgnpst guide anywhere for our phone. No idea where to get the DLL I'm supposed to flash with, nor where to get the files to flash back. This is my first lg, I've been a HTC guy, so I know nothing about lgnpst. Thanks though
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Man how you using adb ? i wiped system by mistake and now i can access download mode recovery and i tried adb but my pc doesent recocgnize my device installed drivers and stuff and tried all the ports but nothing..so i can't use any tools right now to unbrick,,i can't flash because i have nothing on the internal memory also i'm on e975 i need adb to push a rom onto the sd card please help

[Q] HTC One; Need Assistance Restoring/Recoverin Phone (Will pay via Paypal for help)

Hello XDA-Developers,
I've been a reader here for awhile now learning things about the android development for my devices and used many of your all members TUTs, but now i have came across a big issue that has broke my phone and need assistance getting it back online to be used with my carrier again. Below I'll explain my situation of what happen and what I need to be done so I can use the phone again or least get it back to factory stock so I can get a new phone... I will also offer someone $5-10 via PayPal for the assistance if you can help me get my phone back to the condition needed.
To start it off, I purchased a phone off a guy on craigslist, a AT&T HTC One M7 (Model: PN07120), when I purchased the device it was unlocked so I could use it on my carrier that was the reason I purchased it because I'm with T-Mobile. When I purchased the phone i went to setup the device to my needs and requirements and after two days of having the device, I noticed that the phone still had the previous owners information stored and was setup based on him, so because I didnt know the phone was rooted or anything, I googled how to factory reset my phone, so that way I could set it up to my wants, and requirements and below I'll explain the steps i'm at and what it is doing...
1. Searched google for the how-to method to factory reset my phone...
2. Went to 'Settings App', Backup & Restore, Reset Phone, Erase everything, Selected OK.
3. Followed the steps, phone rebooted..
4. Loaded up to the HTC (green logo) screen and stayed there...
5. Waited a few moments, phone never powered 100% back online just stayed at the HTC welcome logo when you first power phone back on.
6. So then I did the Boot Menu steps, (Hold Powerkey + Volume Down) to get into the boot menu,
7. When I got there it loaded to the boot manager window and I clicked FASTBOOT
8. Loaded new menu/logo "twrp" logo, then went to a menu "team win recovery project v2.6.3.3" with the list of options: INSTALL/WIPE/Backup/Restore/Mount/Settings/Advanced/Reboot.
9. I went to reboot to try to least get the phone booted, then when I was in the option to reboot, it gave me the warning of "No OS Installed", Continue without OS?"
10A. If I selected yes, it told me Install SuperSU, for root, otherwise phone wont be rooted.
10A1. I tried doing INSTALL SUPERSU did nothing..
10B. Did without installing SUPERSU and did nothing too, just when I boot comes back to this same menu Team Win Recovery Project.
So it seems I bricked my device as what everyone calls it to what I believe, I am unsure though or unsure how to fix this. I need to get the device either back to factory resetted to like the device comes out the box, so that I can use it, or what to do to get it back rooted successfully and working to be able to use the phone like i could at first.
I tried contacting the buyer but hes ignoring me now that I told him he told me the device wasnt rooted but the device was rooted and i seemed to have a major problem happen trying to restore the phone to factory defaults to set it up to my requirements...
My concerns and want is..
- My Carrier is T-Mobile USA LTE - So, I would have to get the device to stay UNLOCKED so I can still use the device on my carrier: T-Mobile, as it is a AT&T HTC One M7 Unlocked (Was working fine on my T-Mobile Sim prior to me trying to factory reset, besides the phone was named to the original owner and had all his settings and customizations that i didnt like or want.
- I NEED to get the phone back in a working condition. So please I'm really asking for your help I tried searching a couple articles here but couldnt find anything related to my situation.. This is why I am offering a payment for someone to be able to successfully restore my device back to working condition. Please help me!
- NOTE: When plugged up to the computer via USB Cord it did not connect or anything also. I also did not perform a backup because I didnt need any information that was currently on the device because it was the content and settings of the original owner i bought it from so I wanted to clear it all and set it up to my own.
- Overall, my phone is messed up because I tried factory resetting the device not knowing it was rooted, during the process found out it was rooted and now seem to have a bricked phone and need to know how i can fix it, and get android OS back installed, as it tells me there is NO OS installed when I reboot or try booting the device, and it remains at the HTC Bootlogo when powering it on without holding the power + volume down key to access a boot menu to perform a reset, install, etc, Like I mentioned I just want to restore my phone back to working condition even if that means to have to root the device again, etc. All I'm asking for is someone to either help me with each step or to write a step by step what I would need to do to recover and restore my phone.
Phone: HTC one m7 (AT&T)
Computer; Windows
Thank you,
PM or respond here.
Don't worry you device is not bricked...
Google Android Revolution HD 41.0 for HTC one. Download that ROM.
Second you will have to install android SDK to be able to access adb.exe and fastboot.exe...
Now once you installed the SDK move the ROM ARHD to where adb.exe is located.
run command prompt "CMD" from your computer until you are in the folder where you have you adb.exe
Now on your phone get into recovery TWRP and select advance, in advance the is an option called adb sideload click on it and at the bottom slide the button to initiate that mode.
Back to the computer in which you should be in CMD type command "adb devices" and make sure your device shows up. After successfully seen your device there type "adb sideload file-rom.zip and press enter, make sure the file-rom.zip is the exact name of the ROM you are trying to push into the phone.
Sent from my HTC One using xda app-developers app
TopoX84 said:
Don't worry you device is not bricked...
Google Android Revolution HD 41.0 for HTC one. Download that ROM.
Second you will have to install android SDK to be able to access adb.exe and fastboot.exe...
Now once you installed the SDK move the ROM ARHD to where adb.exe is located.
run command prompt "CMD" from your computer until you are in the folder where you have you adb.exe
Now on your phone get into recovery TWRP and select advance, in advance the is an option called adb sideload click on it and at the bottom slide the button to initiate that mode.
Back to the computer in which you should be in CMD type command "adb devices" and make sure your device shows up. After successfully seen your device there type "adb sideload file-rom.zip and press enter, make sure the file-rom.zip is the exact name of the ROM you are trying to push into the phone.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Where can I find this stuff I need to download? I tried doing a search and got a different version, Android Revolution HD 51.0, but could you please link me to the stuff I need to download on my computer, etc?
Okay I've done the steps you've instructed to me and I'm stuck at after launching the sideload feature on my phone; then going back to the computer and running 'adb devices' and under "List of Attached Devices" there isn't anything listed yet, and the phone says "Starting ADB sideload feature..." is the last line, I'm stuck with what to do...
I downloaded android SDK
downloaded the ROM
moved the ROM to the sdk folder where adb.exe and fastboot.exe are
launched adb sideload feature under advanced on mobile device
went back to the computer and ran, 'adb devices', and list of attached devices is none...
so I'm back at being stuck.
djay1127 said:
Hey again,
Okay I downloaded the android SDK, and I'm downloading the correct ROM now to install. Only questions I have for you is the following...
1) You said to move the ROM to where adb.exe is at... What do you mean by this? I don't have that file on my computer...
Where do I move it too once I have the android SDK downloaded and the rom downloaded...
Click to expand...
Click to collapse
Follow this video
http://android.mobilenicheapps.com/tag/android-sdk-installation
Sent from my HTC One using xda app-developers app
TopoX84 said:
Follow this video
[/url]
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I watched the video and got all of that working and checked based on the video and made sure all was installed, now i'm just still stuck at where you instructed me to do 'adb devices' after launching adb sideload under advanced on mobile, i did that, and i get
List of devices attached...
<nothing>
Then goes back to where I can type another command...
The phone itself screen is on the adb sideload feature, and in the textbox thing, shows the following
Updating partition details...
Starting ADB sideload feature...
then has a Cancel button underneath and then a loading bar underneath that... am I doing something wrong? or missing something?
Do I need to have the USB cord plugged into phone/computer also to do this? or dont have it plugged up...
djay1127 said:
Do I need to have the USB cord plugged into phone/computer also to do this? or dont have it plugged up...
Click to expand...
Click to collapse
In order to do a sideload you have to have the cord plugged to both the phone and the computer...
Sent from my HTC One using xda app-developers app
TopoX84 said:
In order to do a sideload you have to have the cord plugged to both the phone and the computer...
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I tried that and still get no devices attached.
djay1127 said:
I tried that and still get no devices attached.
Click to expand...
Click to collapse
Do you have HTC manager installed? If so uninstall it but leave the HTC drivers.
Which windows you are using as well ?
Sent from my HTC One using xda app-developers app
TopoX84 said:
Do you have HTC manager installed? If so uninstall it but leave the HTC drivers.
Which windows you are using as well ?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
HTC Manager = no
drivers = i dont know.
Note: I never had the phone plugged up to my computer before when it was working. I had just purchased the phone off of craigslist and the guy didnt inform me it was rooted or anything just that it was unlocked and worked on tmobile and when i got it it had all his info on it so i factory resetted it and it messed everything up as you can see.
So, I dont believe i have anything drivers installed and i know when i plug it up, there are 4 things windows says installing/etc, and only the first one says completed the other 3 fail.
I am using Windows 7.
You help me get my phone back in working condition I will personally paypal you $20.
djay1127 said:
HTC Manager = no
drivers = i dont know.
Note: I never had the phone plugged up to my computer before when it was working. I had just purchased the phone off of craigslist and the guy didnt inform me it was rooted or anything just that it was unlocked and worked on tmobile and when i got it it had all his info on it so i factory resetted it and it messed everything up as you can see.
So, I dont believe i have anything drivers installed and i know when i plug it up, there are 4 things windows says installing/etc, and only the first one says completed the other 3 fail.
I am using Windows 7.
You help me get my phone back in working condition I will personally paypal you $20.
Click to expand...
Click to collapse
Go to this website and download the HTC sync manager
http://www.htc.com/www/software/htc-sync-manager/
Once installed go to control panel > programs and uninstall a program... Look for the HTC sync manager and uninstall it, but leave the htc drivers alone.
Connect the HTC one to the computer and wait for the drivers to install automatically... After they are successfully installed try to run the CMD adb command adb devices
Sent from my HTC One using xda app-developers app
TopoX84 said:
Do you have HTC manager installed? If so uninstall it but leave the HTC drivers.
Which windows you are using as well ?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Okay so I've done all that and after doing what you said, plugging the phone up to the computer everything installs besides the HTC MTP driver when the phone is plugged in. I still tried doing adb devices from cmd prompt to check and that didnt work still, no devices listed.
I get this error under the driver:
This device cannot start. (Code 10)
djay1127 said:
I get this error under the driver:
This device cannot start. (Code 10)
Click to expand...
Click to collapse
Based on what I've been reading that code error might be cause by a corrupted driver installed.
http://support.microsoft.com/kb/943104
Sent from my HTC One using xda app-developers app
TopoX84 said:
Based on what I've been reading that code error might be cause by a corrupted driver installed.
http://support.microsoft.com/kb/943104
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I answered your PM and awaiting for you to pop back up online... I also sent you a PM with some details and also wanted to let you know TV is installed.
djay1127 said:
I answered your PM and awaiting for you to pop back up online... I also sent you a PM with some details and also wanted to let you know TV is installed.
Click to expand...
Click to collapse
was a tough little driver... well the solution as we saw was that instead of trying to make recovery detect the drivers.... what needed to be done first was let fastboot detect drivers "android 1.0" and once that was done... the previous error was gone.
TopoX;
You know this guy right here is clutch in my book.... He actually walked me through step by step, customizing how i needed it, fixing everything, and getting it back up and even though we had to do alot of modifications on my computer-end, him with TeamViewer literally fixed my phone, upgraded my laptop, and got my phone running better then normal and actually showed me how to do everything and taught me things I didn't know how to do with these Android Phones.
I am now very happy and thankful of XDA-Developers for allowing me to get this assistance and for having a great community with members like TopoX who literally saved my ass and restored my phone back to working condition and fixed my laptop all together, even though I was a brand new member with hardly any posts and not really much background, anyone else wouldn't of wasted their time... but he helped and even was up until 3AM ish doing it with me to make sure I got it back to exactly how I wanted...
We had to get the HTC MTP Driver installed correctly which kept failing/getting code error 10 (Unable to start) which if you google the issue it seems ALOT of people get this issue, and we resolved it by fastbooting and letting it install Android 1.0 itself, then manually updating my pc with windows updates and getting rid of the junk to stop corrupting and failing the drivers needed, then getting everything needed to flash my phone and re-root the device getting everything back in a working condition, unlocked, got that done and now phone is working better then before...
I'm currently running Team Win Recovery Project, ARHDOne-61.0 Google Play Edition, Rooted, SuperUser and Unlocked.
I personally wanna thank TopoX for everything he did and dedicating his time to helping resolve the issue for me.
TopoX84 said:
was a tough little driver... well the solution as we saw was that instead of trying to make recovery detect the drivers.... what needed to be done first was let fastboot detect drivers "android 1.0" and once that was done... the previous error was gone.
Click to expand...
Click to collapse
Cool story bro. Seriously..... Cool story.
I love XDA.
If anyone is trying too get in contact with "djay1127", please contact me on this user, my original first account djay1127 I can no longer access the account as I set it up with my Google account, gplus login, and I can no longer access that email, it's closed out. So I created a new account with my main email account and username.
I plan to contact a admin after doing some searching to discuss getting my old account removed, and the posts and crap merged into this account instead...
Regards.

Categories

Resources