bootloop and white screen - Huawei MediaPad, T-Mobile SpringBoard

hi all, my friend got mediapad and he wanted custom rom so I flashed twrp recovery and his tablet became bricked, it shows huawei logo, then white screen and then after few seconds it shuts down, I tried to restore my backup to his tablet (CM10.1) via twrp and then it booted without problems but when I do wipe data/actory reset, the white screen and bootloop appears again, where is the problem? in twrp recovery? should I choose cwm for his device? twrp shows error "E: unknown filesystem datamedia" (also on my device but mine works without problems)
thanks for any help

441Excelsior said:
hi all, my friend got mediapad and he wanted custom rom so I flashed twrp recovery and his tablet became bricked, it shows huawei logo, then white screen and then after few seconds it shuts down, I tried to restore my backup to his tablet (CM10.1) via twrp and then it booted without problems but when I do wipe data/actory reset, the white screen and bootloop appears again, where is the problem? in twrp recovery? should I choose cwm for his device? twrp shows error "E: unknown filesystem datamedia" (also on my device but mine works without problems)
thanks for any help
Click to expand...
Click to collapse
Did you say you did a restore then you wiped data/factory reset?
Try opening twrp wipe data, wipe the system perform factory reset, then installed fresh version of cm10.1

but this happen also with stock recovery and stock rom install (dload folder), it starts installation (green android with gearbox) and after 2 seconds it restarts (and keep looping) it looks like corrupted partitions and it started after twrp flash

maybe you need to enter to fastboot mode and then push stock's ROM one-by-one like ICS beta back to honeycomb

what partitions must I flash ? are their names same as img files in rom's zip?

Related

[Q] Stuck in boot

I've tried to flash my rom to CM7 but something went wrong with the procedure because I am stuck on the android boot screen (Android logo lightning, it gets stuck for a while and then the letters continue flashing, cycling).
I followed the normal procedure: root, installed custom recovery, I made a backup with nandroid (normal one, which I copied to my computer), wiped data+cache (both caches) and I tried to flash from SD. Update went as normal but I got stuck in this boot screen.
After trying 2 or 3 times this same procedure and being unable to move on, I tried to recover my backup using nandroid: it said it was unable to recover and to do it from adb; adb says that it's unable to mount my sdcard.
From what I've read, I would need to repartition my card.. I chose that option in the recovery; still unable to recover my backup.
I figured that it would not be too bad if I lost my data, so after giving up on CM7 I gave up on recovering my data as well.. the problem is that even after wiping data and cache I'm still stuck in this same boot screen.
Any idea?
I can access recovery and adb so this has to have a solution..
I managed to boot after formatting /system.

Problem with booting device after updating system

Hi.
I have a slight problem with my device. Yesterday, after installing new update via updater my device cant boot the system. It stays on black screen with "MI" then "Powered by android" appears and nothing happens (waited couple of hours, but still nothing). I've tried to wipe cache, dalvik cache and factory reset via recovery - still nothing.
My device was flashed to have TWRP and then supersu - haven't used any other modifications.
Can anyone please help?
Cheers
Same here, TWRP backup also seems gone and cant manually install the update ROM nor the previous stable one.
My problem is solved.
I've flashed miui v.6.7.5 via miFlash and then installed new release through recovery and it works just fine.

Blank screen after restoring backup with TWRP

I own the Nexus 9 (Wi-fi model) and am running Android 6.0 MRA58N, rooted with the TWRP recovery. I wanted to to update to android 6.0.1 so downloaded the latest factory image (MMB29R) from Google's website. I rebooted to TWRP so I could flash the new image. When I realized that you cannot flash system.img through TWRP I had already flashed the boot.img. I attempted to reboot only to get stuck in a bootloop. "Luckily me" I had taken a backup through TWRP previously (boot, data and system). So I went again in TWRP, factory reset and restored (successfully as per the message) the backup. Now every time I boot I see Google's logo, then the "Your device is corrupt" message, that I'm seeing since I installed TWRP (it doesn't seem to affect anything) and then a blank screen that goes on forever.
I had this backup moved to my hard drive and the moved it back to my device. Tried the "fix permissions" option in TWRP as well. No go.
Any suggestions?
I managed to fix it by installing the system, cache, boot and vendor partitions from the new build and the data partition from my nandroid backup.
same happen to me yesterday..what i did is,reboot into fastboot.and then flash vendor, system, boot, cache and also recovery..i have twrp install,but it show 0mb on internal storage.flash stock recovery fix that problem..and after that i flash twrp,supersu and elementalx again..it fix my problem
Sent from my Nexus 9 using Tapatalk

Galaxy s3 can't boot, can't wipe data/factory reset, can't install stock recovery

A few days ago i got the massage "uid inconsistent feeling lucky" and after a couple of minutes my phone restarted and got stuck on the flashing samsung logo, i was on an official 4.3 rom rooted.
I decided that it's time to move to Lineage OS 7.1.1. I tried to enter twrp recovery that was installed on my device but got stuck on the twrp splash screen and after 2 seconds it reboots the device, i installed 7 different twrp versions 2.8.5.0 - 3.0.2-2 with odin but every time with the same result, stuck on twrp splash screen
So i tried to install a stock rom, after odin finished and the device rebooted it got stuck again on the flashing samsung logo and when i tried to enter the recovery that should be the stock recovery i got an android image with the red triangle and the phone reboots, when i tried to install stock recovery with odin it got stuck on file analysis.
After all that i downloaded cwm recovery and philz recovery and those were the only recovery i can access, i can delete cache and dalvik cache but when i try to wipe data/factory reset when i select the option the phone immediately reboots.
I also tried to install the Lineage OS 7.1.1 official rom with cwm but got an error massage "can't install this package on top of incompatible data. please try another package or run a factory reset".
Please help me
Is the phone encrypted? You confirmed the model # of the phone by booting into download mode?
audit13 said:
Is the phone encrypted? You confirmed the model # of the phone by booting into download mode?
Click to expand...
Click to collapse
The model # GT-I9300 shown in download mode, the phone isn't encryptd
Does the phone reboot when you put it into download mode?
audit13 said:
Does the phone reboot when you put it into download mode?
Click to expand...
Click to collapse
No, download mode works fine
When flashing a stock ROM, Odin gives no errors? Are you able to boot into stock recovery right after flashing a stock ROM?
audit13 said:
When flashing a stock ROM, Odin gives no errors? Are you able to boot into stock recovery right after flashing a stock ROM?
Click to expand...
Click to collapse
No errors in odin, when i try to enter stock recovery after flashing stock rom there is an android picture with red triangle and the phone reboots, the only problem that i had with odin is when i tried to flash only the stock recovery it got stuck on file analysis, in my first post i wrote all the things that i've tried already and what works and doesn't work
I'm at a loss as to what the problem could be. Have you thought about taking the phone to a cell repair shop to see if it can be flashed via JTAG?
audit13 said:
I'm at a loss as to what the problem could be. Have you thought about taking the phone to a cell repair shop to see if it can be flashed via JTAG?
Click to expand...
Click to collapse
this would be my last resort, where i live a shop would charge me more than the phone is worth to repair it, is there a way to factory reset with a software or adb with a phone that can't boot into the os?
The only way I know of is using stock or custom recovery.
audit13 said:
The only way I know of is using stock or custom recovery.
Click to expand...
Click to collapse
can it help if i check the re-partition or erase all nand option in odin?
You need a pit file in order to repartition.
Srgyoel said:
A few days ago i got the massage "uid inconsistent feeling lucky" and after a couple of minutes my phone restarted and got stuck on the flashing samsung logo, i was on an official 4.3 rom rooted.
I decided that it's time to move to Lineage OS 7.1.1. I tried to enter twrp recovery that was installed on my device but got stuck on the twrp splash screen and after 2 seconds it reboots the device, i installed 7 different twrp versions 2.8.5.0 - 3.0.2-2 with odin but every time with the same result, stuck on twrp splash screen
So i tried to install a stock rom, after odin finished and the device rebooted it got stuck again on the flashing samsung logo and when i tried to enter the recovery that should be the stock recovery i got an android image with the red triangle and the phone reboots, when i tried to install stock recovery with odin it got stuck on file analysis.
After all that i downloaded cwm recovery and philz recovery and those were the only recovery i can access, i can delete cache and dalvik cache but when i try to wipe data/factory reset when i select the option the phone immediately reboots.
I also tried to install the Lineage OS 7.1.1 official rom with cwm but got an error massage "can't install this package on top of incompatible data. please try another package or run a factory reset".
Please help me
Click to expand...
Click to collapse
The error you got means you need to wipe the /system partition before you flash Lineage. As for why TWRP isn't working, I'm really not too sure unless the image size is bigger than the actual recovery partition size.
audit13 said:
You need a pit file in order to repartition.
Click to expand...
Click to collapse
The PIT file depends on the phones model or on the rom version or both?
File depends on model number and the amount of internal memory. I think the 9300 has 16 GB.
RealWelder said:
The error you got means you need to wipe the /system partition before you flash Lineage. As for why TWRP isn't working, I'm really not too sure unless the image size is bigger than the actual recovery partition size.
Click to expand...
Click to collapse
the only recovery i can use is cwm or philz, but when i try to wipe data\factory reset the phone reboots right when i select the option and does not complete the wipe\reset, i wiped cache, dalvik cache and system partition, but when i try to install the rom it said incomplete data and i should do a factory reset and i can't do that, i had the latest twrp working before all of this happened
audit13 said:
File depends on model number and the amount of internal memory. I think the 9300 has 16 GB.
Click to expand...
Click to collapse
Thank you, i will try to download the file and re-partition in odin, that is the only thing i haven't tried yet
Is it possible the phone has 32 GB?
audit13 said:
Is it possible the phone has 32 GB?
Click to expand...
Click to collapse
My s3 has 16 gb
Noooo... Dont repartition it. You haven't had anything that says it needs it yet.
Flash the stock firmware twice, back to back then see if you have more control.
If you have a btu device (unlocked international) i can give you my reliable files to flash.
All you'll need for now is the firmware file. Flash it and as the phone reboots (blue pass in odin) you need to get it into download mode again without going to the os, if you miss it just pull the battery and go again.
Once in dl mode for the second time, flash the firmware again. When the phone reboots, before it goes to os, get in into RECOVERY MODE and try to factory wipe it. If successful allow it to reboot again as normal to os.
If the factory wipe fails or the phone still hangs at the samsung logo you have bigger issues.
Beamed in by telepathy.

GT-P5110 Softbrick, boot's only to recovery or download

Hi
Got a GT-P5110.
- boots to stock recovery (or other recovery) insted to system
- buttons are not stuck
- Original GT-P5110ZWAXEO (from file in efs), on case, on box
- Can flash CWM, philz, twrp recovery, it will boot the recovery
- After installing any custom rom (lineageos13, cm10, cm12, cm13, omni etc) it will boot to the recovery
- Choosing reboot in the recovery will power off the device, not reboot
- flashing factory rom (P5110XXDNH2 and some other) with odin works, after reboot it shows "Installing system update..", the blue bar goes to about half, after it will show "Erasing..." and power off after a second. Power on again it will boot to facotry recovery, in this place wipe data will work, wipe cache will give error.
- wiping the partitions work with custom recovery, chcecked from shell, partitions are writable, no errors
- flashed new PITfile with repartitioning, still no change.
- if i install a custom ROM, the battery charge screen will come from the custom rom.
So i can not get any OS working on this tab. Any ideas?
The 4-file ROM for odin i only found for GT-P5100, should i try to flash it?
I found the bootloader for P5110, should i flash it?
Thx
So i found my problem.
It was the like here, i missed this thread before. The dock/charge connector was faulty (looks like new) and prevents the tab from booting.
https://forum.xda-developers.com/galaxy-tab-2/help/gt-p5100-boot-recovery-download-mode-t3246322

Categories

Resources