Hello,
A family member went to Dubai and bought back a Samsung Galaxy S3 (GT-I9300). They've said it is an International model (Korean). I'm from New Zealand.
What I would like to do is install the official NZ android firmware on the device. Is this possible? Does it require me to root the device? Do I need to first change the CSC?
If I need to change the CSC, could someone please point me in the right direction?
Thank you
You don't need to root or change csc.
Go to www.sammobile.com and download official Vodafone NZ firmware.
Flash this via Odin.
Sent from my GT-I9305 using XDA Premium HD app
Thank you, one last question. After installing the NZ version, will Kies recognise the phone and update future NZ updates?
Steala said:
Thank you, one last question. After installing the NZ version, will Kies recognise the phone and update future NZ updates?
Click to expand...
Click to collapse
It sure will
Feel free to PM if you need a hand or advice flashing firmware.
Awesome, thanks so much! Will PM if I need your help.
Are you sure its not a M440S? The international korean is identical to the i9300 in terms of hardware but has a different bootloader and requires a slightly different kernel.
Hi xSpeced,
How would I find out if it is a M440S?
I downloaded the VNZ (I9300XXEMA1) version from: http://samsung-updates.com/region/?region=VNZ - however Samsung Kies tells me:
"Your device's current firmware is not supported to update firmware via Kies."
"Current firmware version: PDA:MA1 / PHONE:LLA / CSC: LL1 (XSG)"
The XSG is United Arab Emirates region. Shouldn't this be changed to VNZ?
Steala said:
Hi xSpeced,
How would I find out if it is a M440S?
I downloaded the VNZ (I9300XXEMA1) version from: http://samsung-updates.com/region/?region=VNZ - however Samsung Kies tells me:
"Your device's current firmware is not supported to update firmware via Kies."
"Current firmware version: PDA:MA1 / PHONE:LLA / CSC: LL1 (XSG)"
The XSG is United Arab Emirates region. Shouldn't this be changed to VNZ?
Click to expand...
Click to collapse
boot into recovery mate and it'll flash the VNZ CSC.
To check model number go to settings/about device and check the model number: International S3 is GT-i9300
Thanks. I have already gone into Recovery, done the Cache wipe and Reset. I then went into Download mode and used Odin to flash the downloaded file.
Settings says the device is GT-I9300.
Do I need to do another Cache wipe and Reset?
--------------------------------------------------------------------------------
EDIT: My phone says
AP: I9300XXEMA1
CP: I9300XXELLA
CSC: I9300VNZELL1
So, the CSC has changed. Just Kies says (XSG)?
Steala said:
Thanks. I have already gone into Recovery, done the Cache wipe and Reset. I then went into Download mode and used Odin to flash the downloaded file.
Settings says the device is GT-I9300.
Do I need to do another Cache wipe and Reset?
--------------------------------------------------------------------------------
EDIT: My phone says
AP: I9300XXEMA1
CP: I9300XXELLA
CSC: I9300VNZELL1
So, the CSC has changed. Just Kies says (XSG)?
Click to expand...
Click to collapse
What you have done is fine.
Generally after flashing different firmware through Odin your CSC code doesn't change until you next boot into recovery then it automatically flashes new CSC.
If your phone says VNZELL1 then you're sweet mate. Have you checked in Kies again, maybe your CSC hadn't changed when you checked?
Either way it sounds like you've now got it sorted.
Kies is a pretty crappy piece of software I would uninstall it personally. You have all the drivers needed and Odin so Kies is pretty much irrelevant now. As soon as new firmware is available you can just flash with Odin.
I flash the latest firmware with the highest changelog regardless of country, right now I'm running Hong Kong firmware.
Enjoy your new phone!
Awesome, thank you so much for your help and information. I'm an Android freak but I get scared when it comes to flashing and rooting. Learning as I go.
Left my phone at home as had to pop out. So will pop into recovery mode and try again.
What do you use to back your phone up without Kies?
Sent from my GT-I9100 using Tapatalk 2
Just a question...i also got my phone from dubai thats why...why do you want to change your country on the phone? I think dubai gets OTA's before new zealand gets them...isnt it?
Sent from my GT-I9300 using xda premium
Obagleyfreer said:
What you have done is fine.
Generally after flashing different firmware through Odin your CSC code doesn't change until you next boot into recovery then it automatically flashes new CSC.
If your phone says VNZELL1 then you're sweet mate. Have you checked in Kies again, maybe your CSC hadn't changed when you checked?
Either way it sounds like you've now got it sorted.
Kies is a pretty crappy piece of software I would uninstall it personally. You have all the drivers needed and Odin so Kies is pretty much irrelevant now. As soon as new firmware is available you can just flash with Odin.
I flash the latest firmware with the highest changelog regardless of country, right now I'm running Hong Kong firmware.
Enjoy your new phone!
Click to expand...
Click to collapse
I sent you a PM. My phone shows me a Software Update notification, asking me to register. But it says, processing failed. Doing a Google on this now, but if you have any ideas, that would be most appreciated.
Edit: I've fixed this myself with help of Google. Silly me forgot to sign into my Samsung Account. Now getting OTA updates. Doing a 24mb update as we speak.
rajataghi said:
Just a question...i also got my phone from dubai thats why...why do you want to change your country on the phone? I think dubai gets OTA's before new zealand gets them...isnt it?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I just prefer a NZ version of the software, really. I'm not worry about when NZ gets the updates.
Related
Hi,
I have recently flashed my Samsung Galaxy S2 with KE7 update which debranded my phone. Then I searched an O2 branded firmware from this website but after flashing my phone with this firmware, I am having two problems. Firstly, when I insert my sim it not only asks O2 Pay monthly customers but also asks for Tesco customer option which is quite strange. Secondly, I am not able to do any updates from KIES as it gives error message of THIS VERSION OF THE PHONE CANNOT BE UPDATED.
Can some one please help me to find out original O2 branded firmware? or how to solve this problem please?
Carrier branded firmwares,
http://forum.xda-developers.com/showthread.php?t=1113928
Regards.
zjatoi said:
Hi,
I Firstly, when I insert my sim it not only asks O2 Pay monthly customers but also asks for Tesco customer option which is quite strange.
Why is it strange you have unbranded firmware not belonging to O2 with a CSC that gives as required the O2 networks of which Tesco is a VN .
But as the man said stock O2 is available if you want to go that route .
jje
Click to expand...
Click to collapse
JJEgan said:
zjatoi said:
Hi,
I Firstly, when I insert my sim it not only asks O2 Pay monthly customers but also asks for Tesco customer option which is quite strange.
Why is it strange you have unbranded firmware not belonging to O2 with a CSC that gives as required the O2 networks of which Tesco is a VN .
But as the man said stock O2 is available if you want to go that route .
jje
Click to expand...
Click to collapse
Dude you seriously need to learn to use the quote function. It's kind of hard to figure out were the poster you are replying to post ends and your response begins.
@OP: You will have option for O2 PREPAY, O2 POST PAY and TESCO. This is normal since Tesco mobile piggy back on the O2 network, Just select O2 PostPay if you're on a contract.
Click to expand...
Click to collapse
Thanks for the quick response ... I was confused because previously I only had two options: O2 Pay Monthly customer, O2 Pay As you Go. I got worried because of this Tesco options as I was afraid that it may void my warranty.
Secondly, I am not able to update this version from KIES. Is it because of the current firmware version or is it because there is no update available? My phone's firmware details are as follows:
PDA: I9100XXKE7
CSC: I9100O2UKG2
Thanks again for your help.
zjatoi said:
Thanks for the quick response ... I was confused because previously I only had two options: O2 Pay Monthly customer, O2 Pay As you Go. I got worried because of this Tesco options as I was afraid that it may void my warranty.
Secondly, I am not able to update this version from KIES. Is it because of the current firmware version or is it because there is no update available? My phone's firmware details are as follows:
PDA: I9100XXKE7
CSC: I9100O2UKG2
Thanks again for your help.
Click to expand...
Click to collapse
There may just not be any firmware update out, 3UK was still on KE2 till not very long ago (not that i was on stock for more than 10min).
If you want to you can just flash a stock rom via odin, you dont need to change your CSC to a new one. (its just APN settings, and any silly bundles apps)
ithehappy said:
Carrier branded firmwares,
http://forum.xda-developers.com/showthread.php?t=1113928
Regards.
Click to expand...
Click to collapse
I have just downloaded PDA: XWKE2 version for O2 UK from the given link but it is a .exe file. I assume that file should be either .zip or .tar file. How can I use .exe file to flash my mobile?
regards,
veyka said:
If you want to you can just flash a stock rom via odin, you dont need to change your CSC to a new one. (its just APN settings, and any silly bundles apps)
Click to expand...
Click to collapse
I have just downloaded KE2 firmware and thinking to flash KE7 version to KE2 (not sure if its a good idea) but there is a problem. The file I have downloaded from the above given link is a .exe file and I am not sure if this is the right file to use to flash my mobile?
Further, I don't know how to change CSC. Is it something we do manually or is it done automatically when we flash the firmware?
Thanks
zjatoi said:
I have just downloaded KE2 firmware and thinking to flash KE7 version to KE2 (not sure if its a good idea) but there is a problem. The file I have downloaded from the above given link is a .exe file and I am not sure if this is the right file to use to flash my mobile?
Further, I don't know how to change CSC. Is it something we do manually or is it done automatically when we flash the firmware?
Thanks
Click to expand...
Click to collapse
No, bad idea, thats going backwards.
KE(X) > KF(X) > KG(X)
The exe is a self extracting archive if you had read the thread, you click it and it will extract to where you want it to.
Do some more reading about version numbers.
When flashing via odin CSC is just a part of the rom you might put into odin, as it says in the thread.
veyka said:
No, bad idea, thats going backwards.
KE(X) > KF(X) > KG(X)
Click to expand...
Click to collapse
Yes you are right it is going backwards but my only motive behind this is to bring my mobile into a very simple way of updating via KIES. May be after coming to KE2 version, KIES might update it to any latest update for O2. Please advise.
Hi again,
Just wanted to share an update of my problem. I just flashed my mobile with a backward firmware of KE2 from KE7 and thought it will help to update my firmware with Kies but there is the same message displaying again, 'This version of the device cannot be updated'. :s I need help to resolve this problem as I want to send my mobile for warranty claim coz it restarts sometimes while using it and also its overheated when I use it while charging. I am worried that having a different firmware than the original one may create problem for warranty claim. ANY SOLUTION PLEASE??
zjatoi said:
Hi again,
Just wanted to share an update of my problem. I just flashed my mobile with a backward firmware of KE2 from KE7 and thought it will help to update my firmware with Kies but there is the same message displaying again, 'This version of the device cannot be updated'. :s I need help to resolve this problem as I want to send my mobile for warranty claim coz it restarts sometimes while using it and also its overheated when I use it while charging. I am worried that having a different firmware than the original one may create problem for warranty claim. ANY SOLUTION PLEASE??
Click to expand...
Click to collapse
Flash the O2 firmware and do a hard reset, after resetting flash the same firmware again.
veyka said:
No, bad idea, thats going backwards.
KE(X) > KF(X) > KG(X)
The exe is a self extracting archive if you had read the thread, you click it and it will extract to where you want it to.
Do some more reading about version numbers.
When flashing via odin CSC is just a part of the rom you might put into odin, as it says in the thread.
Click to expand...
Click to collapse
Hi again,
I have some good news. I flashed my mobile with KE2 and had the same problem with KIES as it gave me same message, 'this device version cannot be updated' but when I tried update firmware from mobile setting options it detected a newer available version and so it installed KE7 version and after restart it gave me a message of additional firmware which I confirmed and now I have XWKF3 installed in my mobile. Which is a big relief now.
P.S Kies still shows the same message, 'This mobile version cannot be updated'.
Intratech said:
Flash the O2 firmware and do a hard reset, after resetting flash the same firmware again.
Click to expand...
Click to collapse
Thanks a lot for this suggestion. I am bit not sure as my phone updated its firmware by using firmware update method in its settings. Now it shows its firmware as XWKF3 . Should I follow this method now which you suggested in above mentioned post to resolve this KIES update issue? and which firmware should I use to flash it ?
regards,
ithehappy said:
Carrier branded firmwares,
http://forum.xda-developers.com/showthread.php?t=1113928
Regards.
Click to expand...
Click to collapse
Hi what is the firm wear for a tesco samsung galaxy s2 , i want to go back too either 2.3.3 or 2.3.4 i cant down or upgrade on my kies. it say it doent surport my firm wear. ta jus
Hi guys, just a generic question. What does it mean when the phone is unlocked? I got an unlocked Galaxy S III I9300 and I'm using it on US T-Mobile. Curiously, the phone came with a lot of German T-Mobile bloatware. Are all I9300 not the same? Is it possible to make it completely carrier free? Please enlighten me
It means its not locked to a network .
Branded means its branded by a carrier/network.provider .
Flashing stock rom will remove the branding .
jje
Thanks for the info. Is there a way to update to the stock rom officially through kies or something? And I'm just wondering, are there any carriers in Europe that use stock rom?
Thanks
Sent from my GT-I9300 using xda app-developers app
sam-san said:
Thanks for the info. Is there a way to update to the stock rom officially through kies or something? And I'm just wondering, are there any carriers in Europe that use stock rom?
Click to expand...
Click to collapse
If you do it through KIES, it will keep all the branding, because it will update the ROM for the same CSC (operator-specific firmware) you have.
You need to first install, using Odin or MobileODIN, an unbranded firmware. All countries have branded and unbranded firmwares.
For instance, an UK unbranded ROM can be downloaded like this:
http://forum.xda-developers.com/showthread.php?p=28367295#post28367295
There are unbranded ROMs for all European countries. Use CheckFus to figure out what their CSC code is.
Thanks. So after i flash an unbranded firmware i can get the unbranded rom updates? And it won't wipe my phone right. Does samsung sell the I9300 with unbranded firmware and rom anywhere in Europe? Personally got mine on Amazon.
Sent from my GT-I9300 using xda app-developers app
sam-san said:
Thanks. So after i flash an unbranded firmware i can get the unbranded rom updates? And it won't wipe my phone right. Does samsung sell the I9300 with unbranded firmware and rom anywhere in Europe? Personally got mine on Amazon.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Providers sales outlets networks may sell unbranded and or unlocked throughout the world .
CPW car-phone warehouse UK is unbranded and unlocked .
jje
Check Fus shows my csc is I9300DTMLH2
Sent from my GT-I9300 using xda app-developers app
sam-san said:
Thanks. So after i flash an unbranded firmware i can get the unbranded rom updates? And it won't wipe my phone right. Does samsung sell the I9300 with unbranded firmware and rom anywhere in Europe? Personally got mine on Amazon.
Click to expand...
Click to collapse
- It won't wipe your phone, UNLESS you tell it to.
- There aren't that many OTA updates anyway, so don't worry about it. Besides, when an update is released, you can install it on your phone using the Odin or MobileOdin methods long before it is available on the OTA. None of these require you to wipe your phone.
to use Odin you don't need root, but you do if you want to use mobileOdin.
I've flashed over 20 stock unbranded ROMs on my S III and I never did a data wipe on it, and yet it works flawlessly.
Using the top-right panel of CheckFus, you can download ANY CSC you want as long as it is for the GT-I9300. You don't have to keep it locked to a specific CSC. For Germany I believe the unbranded CSC is coded DBT (or something like that).
Hey, thanks for the info. The website for Checkfus Downloader isn't working. Do you have a link to it or can you post it here? From what I've read, CHANGING the CSC will wipe the phone right. Is there any reason for me to change the CSC to UK or something? I don't really care if the default language is German as long as I can change it to English. I just want to get rid of the bloatware and get an unbranded firmware/rom.
EDIT: Found the firmware on SamMobile. Thanks for the DBT tip.
http://www.sammobile.com/firmware/?page=8&view=6505
I just want to confirm flashing that won't wipe my phone? Because the CSC is different isn't it?
EDIT 2: Read your post again. So flashing the firmware won't actually change the CSC right. I just won't be able to keep the unbranded rom if I update via KIES?
Simonetti2011 said:
- It won't wipe your phone, UNLESS you tell it to.
- There aren't that many OTA updates anyway, so don't worry about it. Besides, when an update is released, you can install it on your phone using the Odin or MobileOdin methods long before it is available on the OTA. None of these require you to wipe your phone.
to use Odin you don't need root, but you do if you want to use mobileOdin.
I've flashed over 20 stock unbranded ROMs on my S III and I never did a data wipe on it, and yet it works flawlessly.
Using the top-right panel of CheckFus, you can download ANY CSC you want as long as it is for the GT-I9300. You don't have to keep it locked to a specific CSC. For Germany I believe the unbranded CSC is coded DBT (or something like that).
Click to expand...
Click to collapse
-Ok, so. Basically I can flash any unbranded firmware I want (UK, German, etc...) regardless of the CSC.
-I just have to use Odin everytime I want to update.
-Also, will I lose the unlock?
-Will there be issues with the modem/baseband/CSC incompatibility or something.
P.S. I keep asking if Odin will wipe my phone because I used to own a Galaxy S 1, and Odin was basically the last resort to flash your phone back to stock, and it was always a wipe.
Thank you.
I have a galaxy s 3 which was given to me as a gift. It was on orange, but was unlocked for me so that I can use it on o2.
I have no idea how it was unlocked, but im unsure about upgrading the software through kies.
Can I still upgrade my software through kies to the latest jellybean? Because ive been waiting for the upgrade on my phone and it still hasnt come up. infact i dont have the option to check for updates either
what shall i do? I dont know if ill lose my data or block my phone by upgrading to jellybean via kies
help please
Your phone maybe unlocked but have the same carrier firmware. You need to flash via Odin a unbranded firmware, as if you do update by kies it may lock your phone again.
Sent from my GT-I9300 using xda app-developers app
thanks, how do I do that? i dont know much about phones/software/etc
i got gt-19300 , 32gb from UK and used odin to install the leaked xxdl18 btu update.
i think my phone was orginally locked to voda as it had branding on it but i bought it from second hand phone shop as fully unlock which i assume is as i am using giff gaff / o2 network.
i now want the uk btu october update xxdlid but when i try it with original o2 sim , voda and giff gaff sim it wont find the ota update. do i need to resort to use kies / odin again.
also is there an easier way to reinstall 250 apps as last time i had to use app back and restore and it took my 500 presses on OK OK O K OK OK OK!! lol without rooting please as its under warranty.
have you checked your CSC matches the rom and your location?
how please
i did do #1234# shows
ap i9300xxdl18
cp i9300xxdl18
csc i9300xadl18
should it be btu then. i am in uk .
cv65user said:
how please
i did do #1234# shows
ap i9300xxdl18
cp i9300xxdl18
csc i9300xadl18
should it be btu then. i am in uk .
Click to expand...
Click to collapse
Hi. XXDLI8 is not a official JB. Its a leaked unofficial Call it "pirated" version. You will never be able to upgrade it officialy.The only way to upgrade vit officialy is to flash ICS XXDLG8 / LH1 and then get the OTA official update.
The other way is to download the ODIN version XXDLJ4 and flash it with odin. There will be no difference.
Your applications can be backed up with your google account. After flashing they will automaticaly reinstall by themself.
CHEERS.
Thanks that cleaRS up. Confusion. I wilk uo date manually with Odin then
Sent from my GT-I9300 using xda app-developers app
Hello everyone.
I decided to get my phone back to absolute stock. I used this method suggested by another member.
http://forum.xda-developers.com/showthread.php?t=2088809
But I got a question regarding the versions.
On my phone it says.
Baseband: I9300CEELL1 (Phone)
Build: I9300XXELL4 (PDA)
CSC: LL2
Although on kies it says: LL4, LL1 and LL2 (KOR). Korean? That's not right.
I took a look at sammobile for my country and provider, but it's completely different.
http://www.sammobile.com/firmware/?page=8&view=10954
Is there something I missed or did wrong?
Any input is appreciated.
I dont see anything wrong... i think
Sent from this girl who's an android nerd
I think there is.
Any input anyone?
Sent from my GT-I9300 using xda premium
Mickyman said:
Hello everyone.
On my phone it says.
Baseband: I9300CEELL1 (Phone)
Build: I9300XXELL4 (PDA)
CSC: LL2
Although on kies it says: LL4, LL1 and LL2 (KOR). Korean? That's not right.
Any input is appreciated.
Click to expand...
Click to collapse
Well you installed the ROM and it seems all is fine, whereas it is Korean because of the CSC. Try to change it with CSC changer from market (will format your phone!) maybe?
chrismast said:
Well you installed the ROM and it seems all is fine, whereas it is Korean because of the CSC. Try to change it with CSC changer from market (will format your phone!) maybe?
Click to expand...
Click to collapse
Good idea.
I'll probably have to flash the one from sammobile via odin.
I doubt I will be able to update trough kies or ota even.
EDIT:
I tried a csc changer, but appearently I have a singlecsc and not a multi csc.
What now?
Sent from my GT-I9300 using xda premium
Hi all,
I recently bought a Galaxy S3 I9300 International through a coupon (like groupon) and they sent me a Phone with CSC "COA" (cosmote, Romania)
Iinstalled my Italian sim without any issue, so i think the phone is unlocked or similar.
I noticed that the phone has the firmware XXEMC2 (March 2013?) and i want to install all new updates... but i think that Romania doesn't update regularly the official firmware (i don't see custom icons for the romanian firmware)
Is it advisable to flash the Italian Firmware (maybe the latest XXEMF6, or the actual XXEMC2), and change the CSC code to ITV to get newer updates soon?
Or i'm approaching to an unnecessary procedure that may brick my phone (or voiding the warranty?)
Thanks in advance!
Having the right CSC and unmodified status will allow you receive OTA updates, which will probably be six months behind those posted on xda.
Go to sammobile and download the latest rom for the country where you will be using the phone, flash using odin on your pc. This gives you the right modem and won't brick your phone.
Thanks for the reply.
Now i'm downloading the latest ITV firmware I9300XXEMG4_I9300ITVEMG2_ITV.zip from the site you specified (seems to be the one that Kies tries to install, since it has the icon highlighted.
Then, i need to flash the firmware twice in order to change the CSC Code, right?
Do i need to do other task, in order to have the "unmodified" status ?
Remember that the latest MG4 firmware alters the format of your efs folder. Have a look in the general section for more info.
Sent from my GT-I9300 using xda premium
radixon said:
Remember that the latest MG4 firmware alters the format of your efs folder. Have a look in the general section for more info.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks, i'll download the same firmware i'm using now, but with CSC ITV (XXEMC2, March 2013)
Best go read the stickies in general before you flash anything, your logic on updating seems confused. The CSC code makes almost no difference to how you use the phone.
boomboomer said:
Best go read the stickies in general before you flash anything, your logic on updating seems confused. The CSC code makes almost no difference to how you use the phone.
Click to expand...
Click to collapse
Yes i'm aware that the CSC makes no differences to the phone, but now i'm actually bound to the Cosmote carrier, and i think he doesn't release updates regularly; am I wrong?
smala said:
Yes i'm aware that the CSC makes no differences to the phone, but now i'm actually bound to the Cosmote carrier, and i think he doesn't release updates regularly; am I wrong?
Click to expand...
Click to collapse
No, the firmware is irrelevant to the carrier. Only simlock is carrier specific, if your sim works then you can use any firmware.
smala said:
Yes i'm aware that the CSC makes no differences to the phone, but now i'm actually bound to the Cosmote carrier, and i think he doesn't release updates regularly; am I wrong?
Click to expand...
Click to collapse
It does make a difference that's why it exists .
jje
JJEgan said:
It does make a difference that's why it exists .
jje
Click to expand...
Click to collapse
I think i'm confused now
That's my noob point of view:
I unboxed the phone and installed my sim without any issue, so i think it's not simlocked.
I think that the Cosmote - Romania carrier (CSC "COA") doesn't release updates often (I don't see firmware XXEMF6 or the latest XXEMG4 (/efs issue apart)
I'm sticky with stock/original/samsung firmware XXEMC2 (march 2013)
if i flash the exact revision, but ITV, (since i'm italian) Firmware i can obtain all the fresh, unbranded, updates.
now... i don't know exactly the roll-out date policy for every firmware /country, and if any carrirer can/has to "customize" a firmware in order to release (with a delay, of course) And/Or if it's interested to release an update.
What i'm thinking now is "nice. an update... let's install." but i want to be more-than-sure that this simple procedure won't brick my phone.
Please be patient with me.
smala said:
I think i'm confused now
That's my noob point of view:
I unboxed the phone and installed my sim without any issue, so i think it's not simlocked.
I think that the Cosmote - Romania carrier (CSC "COA") doesn't release updates often (I don't see firmware XXEMF6 or the latest XXEMG4 (/efs issue apart)
I'm sticky with stock/original/samsung firmware XXEMC2 (march 2013)
if i flash the exact revision, but ITV, (since i'm italian) Firmware i can obtain all the fresh, unbranded, updates.
now... i don't know exactly the roll-out date policy for every firmware /country, and if any carrirer can/has to "customize" a firmware in order to release (with a delay, of course) And/Or if it's interested to release an update.
What i'm thinking now is "nice. an update... let's install." but i want to be more-than-sure that this simple procedure won't brick my phone.
Please be patient with me.
Click to expand...
Click to collapse
Anytime you flash anything you Risk bricking your phone and or voiding your warranty. The. Only official procedures for updating your firmware are kies and ota updates.
allright.. i flashed the ITV firmware adn it went OK
but now i see the correct CSC, and Kies says that my phone doesn't support updates.
I correctly flashed a second time, but with no result.
Any tips?
You can still update your firmware with kies. To do so you need to manually input model and serial numbers . also you have to put phone in download mode before connecting to computer.
Sent from my GT-I9300 using xda premium
ashraf sharif said:
You can still update your firmware with kies. To do so you need to manually input model and serial numbers . also you have to put phone in download mode before connecting to computer.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
i did this procedure (i told to Kies my model and S/N ) to factory reset the phone and Kies downloaded a Firmware.
it downloaded I9300XXEMC2 (the same) but with CSC I9300QXFEMA2 :silly:
Now my phone has a UGLY splash boot of "La Fleur" carrier!
Before this madness i had a, as far i know, a International S3 (CSC EMC1 (COA))... now i have a branded Phone!
(though my sim still works without issues)
What the hell has happened?
If you want ota updates or want to update by using kies than stay with this firmware. If you want the newest unbranded firmwares than flash with Odin any firmware you like that is compatible with I 9300. Make sure CSC matches your region. The lafleur screen is the boot animation which can be replaced manually if you root. You may be able to change csc with CSC changer app. Probably need root for that too. You can always reflash the firmware update you initially flashed and were happy with. Whatever kies gives you is what the phone was programmed initially for your phone. I think. I prefer to use sammobile and Odin as you can get more current firmwares
if you want to customize your phone by changing csc or flashing firmwares even official firmwares than do not use kies or ota for updating for updating. also since customization always risky it is best to back up your EFS. this too requires Root. PLEASE READ THE STICKIES . and the FAQs . before you proceed with flashing anything else. Right now your phone is official and upgradeable through kies.If you are not happy with what samsung gives you than I suggest you ROOT
Sent from my GT-I9300 using xda premium