[Q] Galaxy tab 10.1 google now crash - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Hello, i am in need of some help. i recently flashed a custom rom ( Android 4.2.2 Jelly Bean CM10.1 Nightly) to my galaxy tab 10.1
i have installed google search and flashed the correct gapps file to it using CWM.
whenever i go to use the speech recognition option to the right of the google search bar, google now crashes.
any ideas would be great!:laugh:

rykanator said:
Hello, i am in need of some help. i recently flashed a custom rom ( Android 4.2.2 Jelly Bean CM10.1 Nightly) to my galaxy tab 10.1
i have installed google search and flashed the correct gapps file to it using CWM.
whenever i go to use the speech recognition option to the right of the google search bar, google now crashes.
any ideas would be great!:laugh:
Click to expand...
Click to collapse
You installed Google Search from the Play Store, and not from a backup, right? You could try going to Apps/Google Search and clearing cache. I've heard that's worked.

Disable the Hotword detection in setting, under languages and inputs and it will no longer crash.
Sent from my GT-P7500 using xda app-developers app

John Kester said:
Disable the Hotword detection in setting, under languages and inputs and it will no longer crash.
Click to expand...
Click to collapse
I had this problem too, and disabling "Hotword detection" worked for me, thanks.
More specifically, it is under Settings-> Language & Input -> Voice Search

Google Now / Google Search crash problem solved
rykanator said:
Hello, i am in need of some help. i recently flashed a custom rom ( Android 4.2.2 Jelly Bean CM10.1 Nightly) to my galaxy tab 10.1
i have installed google search and flashed the correct gapps file to it using CWM.
whenever i go to use the speech recognition option to the right of the google search bar, google now crashes.
any ideas would be great!:laugh:
Click to expand...
Click to collapse
Google Now / Search Crashes? SOLVED
I had the same issue in my Samsung Galaxy Tab 10.1 CM 10.1 (JB4.2.2)
My problem has been solved after changing language settings to English (Australia).
I tried the following steps & its working perfectly now.
1. Uninstalled Google search from settings - Apps - Google Search.
2. Open Play store & install Google search again
3. Dont open Google search now.
4. Change Language settings to English (Australia) in Settings -> Language & input -> Language
5 Open Google search now & skip the Now setup at the startup (select May be Later)
6 Go to settings page in Google Search (Right bottom corner) & select voice and verify the Language shows English (Australia).
7. Select Google Now & Enable it by selecting ON.
AL RATHEESH. R
[email protected]

alratheesh said:
Google Now / Search Crashes? SOLVED
I had the same issue in my Samsung Galaxy Tab 10.1 CM 10.1 (JB4.2.2)
My problem has been solved after changing language settings to English (Australia).
I tried the following steps & its working perfectly now.
1. Uninstalled Google search from settings - Apps - Google Search.
2. Open Play store & install Google search again
3. Dont open Google search now.
4. Change Language settings to English (Australia) in Settings -> Language & input -> Language
5 Open Google search now & skip the Now setup at the startup (select May be Later)
6 Go to settings page in Google Search (Right bottom corner) & select voice and verify the Language shows English (Australia).
7. Select Google Now & Enable it by selecting ON.
AL RATHEESH. R
[email protected]
Click to expand...
Click to collapse
Wow! Thanks for this information. Working great now!
---------- Post added at 11:50 PM ---------- Previous post was at 11:46 PM ----------
drdunga said:
I had this problem too, and disabling "Hotword detection" worked for me, thanks.
More specifically, it is under Settings-> Language & Input -> Voice Search
Click to expand...
Click to collapse
Thank you also. I followed your advice at the same time. lol No stone unturned!

please help
CinDroid said:
Wow! Thanks for this information. Working great now!
---------- Post added at 11:50 PM ---------- Previous post was at 11:46 PM ----------
Thank you also. I followed your advice at the same time. lol No stone unturned!
Click to expand...
Click to collapse
hi guys ,
i have the same problem
I tryed to do exacly what you say 3 times and no use ? ;
can you guys help ?
koop

libc.so?
I have the same problem, it seems after the last Google Search update.
Before I was using English (Generic), and Google Now with "OK, Google" hotword detection was working fine.
I changed to English (US) to use the hotword detection from any screen, but now it always crashes as soon as it tries to recognize what I say (but saying OK Google still triggers the voice search).
I don't want to disable the hotword detection because that's the only reason I'm using Google Now anyway.
The report's stack trace contains some really cryptic information, it seems from a native library, and I suspect it may have to do with the CyanogenMod nightlies updates. I am using Android 4.4.4 from cm-11-20140806-NIGHTLY on a Samsung Galaxy S II (gti9100).
Going through the stack trace, it first references the file libc.so (from /system/lib/libc.so), I remember also some references to this file somewhere in the nightly logs, so maybe that's the cause?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

brunofin said:
I have the same problem, it seems after the last Google Search update.
Before I was using English (Generic), and Google Now with "OK, Google" hotword detection was working fine.
I changed to English (US) to use the hotword detection from any screen, but now it always crashes as soon as it tries to recognize what I say (but saying OK Google still triggers the voice search).
I don't want to disable the hotword detection because that's the only reason I'm using Google Now anyway.
The report's stack trace contains some really cryptic information, it seems from a native library, and I suspect it may have to do with the CyanogenMod nightlies updates. I am using Android 4.4.4 from cm-11-20140806-NIGHTLY on a Samsung Galaxy S II (gti9100).
Going through the stack trace, it first references the file libc.so (from /system/lib/libc.so), I remember also some references to this file somewhere in the nightly logs, so maybe that's the cause?
Click to expand...
Click to collapse
Same issue here, different phone and I'm on SlimSaber ROM... Please let me know if you find a solution
---------- Post added at 09:50 PM ---------- Previous post was at 09:43 PM ----------
Actually just found a solution http://forum.xda-developers.com/gal...le-hotword-screen-crash-t2824787/post54439615

Noed said:
Same issue here, different phone and I'm on SlimSaber ROM... Please let me know if you find a solution
---------- Post added at 09:50 PM ---------- Previous post was at 09:43 PM ----------
Actually just found a solution http://forum.xda-developers.com/gal...le-hotword-screen-crash-t2824787/post54439615
Click to expand...
Click to collapse
Man, thank you bery much for pointing that out! fixed my issue as well!
For those who wants to know the solution, I'm quoting it from another thread located here: http://forum.xda-developers.com/gal...le-hotword-screen-crash-t2824787/post54439615
LooseSeal said:
Open Google Search and go into Settings > Voice. Make sure 'Bluetooth Headset' is ticked. That fixed the issue for me.
Click to expand...
Click to collapse
Btw, curti a sua foto valeu!

Related

[16/10/2012][CWM][WIP][4.1.2] gExperience 0.3b beta - All the Google Apps!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ALL THE GOOGLE APPS IN ONE PACK
THIS IS A WORK IN PROGRESS -- PLEASE MAKE A BACKUP BEFORE TRYING
What is gExperience?
Its a pack that has ALL the Google Apps in one single place for which you can select individually what you want to install! This pack not only has the standard Google Apps but also what is available at the Play Store, including restricted apps not available in every country. It also has inverted versions for available apps. It also tries to install all possible apps to /data partition so you don't end up with no space in /system. Finally, you can choose to uninstall undeed files for your language (like Offline Google Now, Pico TTS). All of this fully customizable thanks to Aroma Installer.​
What is included exactly?
You can check a list here. Please note that as of now there are some apps not available for install (even though they show up in the installer).
These unavailable apps are:
All Google TV apps (if someone knows where to get them, please PM me)
Google Catalogs (if someone knows where to get it, please PM me)
Google Apps Device Policy
Google Apps Lookup
Google Chrome to Phone (1 request so far)
Google Analytics
Google Authenticator
Google Finance
All Google IME
Google IO 2012
Orkut
Schemer
If I receive 5 or more request for any of these apps I will try to include them​
How do I install this?
Just like any script in CWM Recovery. Just select the zip and let Aroma guide you through the rest.​
Can I install on my NOT Defy device?
Is my understanding that this script should work with no problems with Bravo and Milestone 2 devices. It should work with other devices as there's no device dependent scripting. Please note that this pack DOES NOT includes FaceLock as it is not supported for my device.
Currently known supported devices:
Defy
Is there anything else I should know?
YES, please be aware that whatever you choose NOT to install will be DELETED from your device (if you have that app installed obviously). This only applies for apps installed with gExperience.​
Can I install on top of my full size gapps?
You can, but it can lead to unexpected results. One thing you have to understand is that the app name can have any name (it will not affect the name of the app when you install it). For example, I can name the YouTube apk as "XDAYT.APK". It will install normally and with no problems but there's no way for the script to know the name of the file of every app installed so this script will only install and uninstall apps installed by itself. You're probably better off installing this on a fresh ROM with no gapps installed.​
Can I translate it to my language?
Sure you can! Please point your browser here: http://www.getlocalization.com/gEx/
Languages supported:
English (by me) | UP TO DATE
Spanish (by me with some help from edqu) | UP TO DATE
Polish (thanks to trurl3) | 0.2 beta
Portuguese (Brazil) (thanks to GustavoMartins1 / claudiobastos) | UP TO DATE
Hungarian (thanks to hunya) | UP TO DATE
Chinese (Taiwan) (thanks to wjh) | 0.2 beta
Can I send you my calibration_matrix data?
You don't need to do it anymore! Amarullz updated the Aroma Installer and now calibration is not required anymore!:victory:​
I want to report a bug! What shall I do?
Try to give me as much information as possible (like gExperience version, device, apps selected, etc). Also you could save the log right after the script finishes. You will see a "Save Log" button on the bottom left hand side.​
This is too much for me! Is there a lighter version?
Yes, please see this thread.​
Credits:
AnTerNoZ's for the custom gapps for Defy
Bexton for the Offline Voice Recognition for Google Now uninstall script
Amarullz for the Aroma Installer
TUN_SD for the inverted gapps
Articudos for the Galaxy Nexus 4.1.2 gapps
DOWNLOAD gExpencience 0.3b beta (~215MB):
http://goo.gl/oa8C6​
PLEASE BEAR IN MIND I'VE BEEN A FATHER RECENTLY AND PROBABLY ABOUT TO LOSE MY JOB SO I WILL UPDATE THIS WHENEVER I HAVE A CHANCE​​
Changelog
0.3b beta (16/10/2012)
Updated Play Store to 3.9.16
0.3 beta (14/10/2012)
Updated GAPPS base to 4.1.2
System Information screen can be translated now
Updated Aroma Installer to 2.56 (capacitive buttons working again)
Updated Drive / My Tracks / Streetview / YouTube / Gesture Search
Updated Google+ / Google Earth / Google Translate / Google Play Music
Removed spaces from installed apps
Fixed installation of Google Voice instead of Voice Search
Added deletion of data on sdcard for Google Play Books/Magazines/Videos
Updated inverted versions
0.2 beta (03/10/2012)
Updated Aroma Installer to 2.55 (no more calibration required)
Added Portuguese (Brazil) language (user contributed)
Added Hungarian language (user contributed)
Added Chinese language (user contributed)
Removed debug info
Improved mounting/unmounting script
Fixed splash animation
Fixed a few cosmetic issues
0.1b (30/09/2012)
Initial beta release
Based on Custom GAPPS script
List of current known bugs, glitches, etc
Some apps unavailable even though they appear on the list (check OP)
Some apps FCs on Galaxy Nexus (1 report so far)
Google Play Movies FCs
GoogleEars frozen for users outside United States (can be unfrozen by ie Titanium Backup)
Is it possible to use on different devices?
Sent from my Galaxy Nexus using XDA Premium HD app
Good work and great effort, will try when flashing the next build.
Sent from my MB526 using xda premium
Great Work!
You've done a superb job of bringing together all possible Gapps...
Loved your older release...
Will flash this one as soon as the next JB build from Quarx comes out.
firered365 said:
Is it possible to use on different devices?
Click to expand...
Click to collapse
I would like to think so, yes. It should work with every device available but right now is a work in progress. I've posted in the Defy subforum as I have a Defy and I can support it. You can try and let me know how it goes! (Please do a backup first).
J_M_V_S said:
I would like to think so, yes. It should work with every device available but right now is a work in progress. I've posted in the Defy subforum as I have a Defy and I can support it. You can try and let me know how it goes! (Please do a backup first).
Click to expand...
Click to collapse
Tried it out, but some apps force close.
Sent from my Galaxy Nexus using XDA Premium HD app
firered365 said:
Tried it out, but some apps force close.
Click to expand...
Click to collapse
Ok, can you let me know which apps FC? This way I can improve the script! Thanks.
J_M_V_S said:
Ok, can you let me know which apps FC? This way I can improve the script! Thanks.
Click to expand...
Click to collapse
All of them except: Androidify, Chrome, Gmail, Google search, Google+, maps+bundled apps, Play Store, Navigation, talk.
Sent from my Galaxy Nexus using XDA Premium HD app
Thanks for this, looks very useful. I have to make the first request: Chrome to phone.
firered365 said:
All of them except: Androidify, Chrome, Gmail, Google search, Google+, maps+bundled apps, Play Store, Navigation, talk.
Click to expand...
Click to collapse
Thanks for reporting. Would it be possible for you the save the log and send it to me? ("Save Logs" button appears right after finishing installation).
mato_d007 said:
Thanks for this, looks very useful. I have to make the first request: Chrome to phone.
Click to expand...
Click to collapse
I'll note that down. If more people is interested in Chrome to Phone I'll add it
J_M_V_S said:
Thanks for reporting. Would it be possible for you the save the log and send it to me? ("Save Logs" button appears right after finishing installation).
Click to expand...
Click to collapse
I didn't save it.
Sent from my Galaxy Nexus using XDA Premium HD app
firered365 said:
I didn't save it.
Click to expand...
Click to collapse
Yeah..I supposed so. Too bad...well, if you ever try it again try to remember to save the logs
Would it be possible to send me you calibration_matrix info for Aroma?
J_M_V_S said:
Yeah..I supposed so. Too bad...well, if you ever try it again try to remember to save the logs
Would it be possible to send me you calibration_matrix info for Aroma?
Click to expand...
Click to collapse
Can you tell me where it is at?
Sent from my Galaxy Nexus using XDA Premium HD app
firered365 said:
Can you tell me where it is at?
Click to expand...
Click to collapse
Just updated the OP with this info:
Can I send you my calibration_matrix data?
Yes please. I will add it to the installer so you don't have to calibrate Aroma installer every time! Just download calibration.zip and then install it via CWM like any other script (Press Power button on first dialog to select no). After finishing the new data will be written to calibration.zip. Send it to me and let me know which device are you using! YOUR SYSTEM WILL NOT BE MODIFIED. IT WILL ONLY GET YOUR CALIBRATION DATA AND FINISH​
J_M_V_S said:
Just updated the OP with this info:
Can I send you my calibration_matrix data?
Yes please. I will add it to the installer so you don't have to calibrate Aroma installer every time! Just download calibration.zip and then install it via CWM like any other script (Press Power button on first dialog to select no). After finishing the new data will be written to calibration.zip. Send it to me and let me know which device are you using! YOUR SYSTEM WILL NOT BE MODIFIED. IT WILL ONLY GET YOUR CALIBRATION DATA AND FINISH​
Click to expand...
Click to collapse
Where is it located? Can't find it in sdcard nor system.
Sent from my Galaxy Nexus using XDA Premium HD app
New version 0.2 beta is up! Now you don't need calibration anymore! Also added a few more translations (thanks to all that contributed) and fixed a few bugs! Check OP for download link.
Hi and GG it looks so cool, but why not include ALL gaaps and during installation tick what you want/don't want ?
thanks

[ROM][4.3.1][October 29th] Slim Bean m7tmo [Build 2.x]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: We are not responsible for any damages on your device.
Original Slim Features:
The Real Dark Slim
Notification drawer Shortcuts
Full hardware key rebinding!
Keyboard rotation
SlimCenter
Check out our full feature list here
Changelog
Find our latest Changelog go here
Chat with the slim team and other slim users
IRC: #slimusers @freenode
New to IRC? Don't have a native app? Try the Freenode web client [link] or the Firefox extension Chatzilla [link]
More interested in development and compiling? Check out our development channel. #slimdev
Check out our forum if you're looking for a place to talk all day long about SlimROMs FORUM
Google+ [link]
Twitter [link]
Facebook [Link]
Installation instructions
For Most Users
Please keep in mind if a special instruction is needed it will be noted in the Changelog
Download the latest build from [here]
Addons ( if you don't have it already) from [here]
!Recommended! Full wipe, and manual format /system
Flash ROM and the addons you want, reboot
FAQ
Check out out FAQ before posting! Keeps more common questions answered in one place!
Help us out!
If you want to help us by translating slim to your language check out Crowdin.net and submite your translations.
Or consider a donation.
Thanks!
You can find the full list of credits here
Source
Please visit here for the rom source code.
Kernel source can be found here
Beta 1 notes :
Root - It's disabled by default, it has to be or it's an instant fail on the CTS! (Compatibility Test Suite). Good news you can just turn it on. Either in the superuser app -> settings or in Developer options.
A few more settings have been moved around. It was decided that no "advanced" user settings should be under developer options. Some were moved previously but with the beta 1 release the following have also been changed
Ram bar is now under interface
Media scan on boot is under system advanced options
Advanced reboot menu is now called Secure reboot and is under security.
Reserved 2
Lock Screen 1st screen shot
How do I add apps to the lock screen? I have already enabled it in the settings I just can not add to it. Add items like cam, message, etc... Thank you.
muchlove106 said:
How do I add apps to the lock screen? I have already enabled it in the settings I just can not add to it. Add items like cam, message, etc... Thank you.
Click to expand...
Click to collapse
Security-> lock screen -> widgets
Sent from my One using Tapatalk 4
DPI will not change so everything is super small.. Any ideas, maybe bad flash?
Sent from my One using xda premium
StickyEyez said:
DPI will not change so everything is super small.. Any ideas, maybe bad flash?
Sent from my One using xda premium
Click to expand...
Click to collapse
Go into Dev options and change root access to adb+app and try it then. Still a bit of work to do around the new security settings Google imposed on us in 4.3
Sent from my One using Tapatalk 4
New build is up. Check 2nd post for notes.
Issues with root access?
So... trying to change DPI settings, it tells me there is no root access. Okay. I go to Advanced > Superuser > Press menu to access settings and make it so ADB and Apps can both have superuser access. I go back to change DPI. No workie. Okay, maybe it needs a reboot? I reboot. Still no workie. Try to toggle the setting a few times and it still no workie. =(
Any ideas?
starlitjessi said:
So... trying to change DPI settings, it tells me there is no root access. Okay. I go to Advanced > Superuser > Press menu to access settings and make it so ADB and Apps can both have superuser access. I go back to change DPI. No workie. Okay, maybe it needs a reboot? I reboot. Still no workie. Try to toggle the setting a few times and it still no workie. =(
Any ideas?
Click to expand...
Click to collapse
1.Go to Play Store
2. Download SuperSU
3. Update Binary via TWRP/CWR (app will do this for you, just accept the process)
4. Reboot
5. Now you are fully rooted.
6. Try again changing the DPI.
Thanks! I'll try it right now!
---------- Post added at 11:02 PM ---------- Previous post was at 10:56 PM ----------
NoWey said:
1.Go to Play Store
2. Download SuperSU
3. Update Binary via TWRP/CWR (app will do this for you, just accept the process)
4. Reboot
5. Now you are fully rooted.
6. Try again changing the DPI.
Click to expand...
Click to collapse
So, the installation failed for the updated binary. I tried to go into CWM but the app couldn't force boot into it. I'm in CWM now but I can't seem to find the file it's wanting to install...? Do you know where this file is stored and what it's called?
It seems that other superuser apps won't install the updated binary through CWM or through the regular installer. -_- Any idea why this might be?
---------- Post added at 11:19 PM ---------- Previous post was at 11:02 PM ----------
NoWey said:
1.Go to Play Store
2. Download SuperSU
3. Update Binary via TWRP/CWR (app will do this for you, just accept the process)
4. Reboot
5. Now you are fully rooted.
6. Try again changing the DPI.
Click to expand...
Click to collapse
starlitjessi said:
Thanks! I'll try it right now!
---------- Post added at 11:02 PM ---------- Previous post was at 10:56 PM ----------
So, the installation failed for the updated binary. I tried to go into CWM but the app couldn't force boot into it. I'm in CWM now but I can't seem to find the file it's wanting to install...? Do you know where this file is stored and what it's called?
It seems that other superuser apps won't install the updated binary through CWM or through the regular installer. -_- Any idea why this might be?
Click to expand...
Click to collapse
NEVER FREAKING MIND! I found the setting! I'm good to go!
ROM works great Thank You
Sent from my One using xda premium
Damn I've tried every ROM here and I keep coming back to this one it is near perfect I can use my theme on it and it has pie and damn good bat life some have more features but lack the theme chooser or pie or don't have as get as good bat life anyways keep up the good work hope to see a new update soon lol
Sent from my One using xda app-developers app
Issues with root access?
danyjohn said:
Issues with root access?
Click to expand...
Click to collapse
Nope no issues ROM is awesome I don't have any issues
Sent from my One using xda app-developers app
home key not working
anyone else having issues with home key mapping on beta4?
i even tried custom mapping, and still not working..
faheem5 said:
anyone else having issues with home key mapping on beta4?
i even tried custom mapping, and still not working..
Click to expand...
Click to collapse
Haven't tried it I use pie n I'm not having issues
Sent from my One using xda app-developers app
faheem5 said:
anyone else having issues with home key mapping on beta4?
i even tried custom mapping, and still not working..
Click to expand...
Click to collapse
What exactly are you trying to do? Set home to be which key?
Sent from my Nexus 7 using Tapatalk 4
My home key is not working (default action) nor is the assigned key i setup (long press = menu)
when i press the home key, it lights up, vibrates.. but doesnt do the default action.
I did remove the default launcher in the ROM and i used Apex launcher.. so not sure if that has anything to do with it
i did not have this problem in Beta3.. i did re-flash, with wipe/reset.. and same issue
faheem5 said:
My home key is not working (default action) nor is the assigned key i setup (long press = menu)
when i press the home key, it lights up, vibrates.. but doesnt do the default action.
I did remove the default launcher in the ROM and i used Apex launcher.. so not sure if that has anything to do with it
i did not have this problem in Beta3.. i did re-flash, with wipe/reset.. and same issue
Click to expand...
Click to collapse
All working as expected here...... I just mapped home to default and long press for menu and both work.. Try it with a clean flash and no changes to see if it works then we can look into what causes the problem once you've made changes.
Sent from my Nexus 7 using Tapatalk 4

How To Force Enable Google Assistant

So, as most of you know, Google released an update to Google Play Services that allows all phones with Nougat and Marshmallow firmware to use Google Assistant. Good!
This new feature unfortunately has to be rolled out through Google's servers. Bad
There is a simple way to force enable Google Assistant on (almost) all your devices, and all you need is root and edit your build.prop
*Please remember that these build.prop aren't necessary because Google will eventually push it your device through the rollout. However, this method just ensures that you get Google Assistant now without having to wait for that happen. So, while it may not be necessary, it can be very helpful for many marshmallow and nougat devices at this time*
Now for the "How to" part:
0. Make sure you have the latest Google Play Services, the Google app, and your device is rooted
1. Open your build.prop editor (I use J Rummy's editor) and add this single line to the bottom of your build.prop-
ro.opa.eligible_device=true
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Save it
3. Reboot your device
4. Wait for your device to completely boot (I waited a few minutes afterwards, just to be sure)
5. Hold your Home Button and behold this magical moment...
*This method is very similar to what we used to Enable Google Assistant in the past. However, this method works without the need to change your device name to "Pixel" or Manufacturer to "Google" in the build.prop because Google Assistant is now updated through Google Play services to allow (almost) all devices to use it now
-So for nexus devices (6P/5X), this means you get to keep your Auto HDR Camera Mode because you didn't modify your device name or manufacturer name in build.prop.
(changing those names would have taken away those said options from the Google Camera app)
I hope this helps most of you guys out there eagerly waiting for Assistant to hit your device. It worked for me ?
Sent from my Nexus 6P using Tapatalk
Can confirm worked perfectly! Thanks a ton op ?
crixley said:
Can confirm worked perfectly! Thanks a ton op ?
Click to expand...
Click to collapse
No problem! I'm glad that I can finally contribute to XDA (sort of) ?
Sent from my Nexus 6P using Tapatalk
vincentallen2 said:
So, as most of you know, Google released an update to Google Play Services that allows all phones with Nougat and Marshmallow firmware to use Google Assistant. Good!
This new feature unfortunately has to be rolled out through Google's servers. Bad
There is a simple way to force enable Google Assistant, and all you need is root and edit your build.prop
Now for the "How to" part:
0. Make sure you have the latest Google Play Services and Google app
1.Open your build.prop editor (I Use J Rummy's editor) and add this single line to the bottom-
ro.opa.eligible_device=true
View attachment 4062532
2. Save it
3. Reboot your device
4. Wait for your device to completely boot (I waited a few minutes afterwards, just to be sure)
5. Hold your Home Button and behold this a magical moment...
View attachment 4062530
This works without the need to change your device name to "Pixel" or Manufacturer to "Google" in the build.prop because Google Assistant is now updated through Google Play services to allow (almost) all devices to use it now
I hope this helps most of you guys out there eagerly waiting For Assistant to hit your device. It worked for me ?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Does the Home button animation work just like it works on Pixel phones?
Edit : I updated my device to March Security update and after two days I got the assistant update without tweaking the build.prop and there is no animation for the home button
How can i update google play services???
destinypham said:
How can i update google play services???
Click to expand...
Click to collapse
Hi... You can manually update it. Download the appropriate version from apkmirror:
http://www.apkmirror.com/?s=Google+play+services&post_type=app_release&searchtype=apk
5.1 said:
Hi... You can manually update it. Download the appropriate version from apkmirror:
http://www.apkmirror.com/?s=Google+play+services&post_type=app_release&searchtype=apk
Click to expand...
Click to collapse
Do all of things like the guide, and even flash rom and Gapp again, but i still can not enable GA
This method has been available since Assistant's release.
5.1 said:
Hi... You can manually update it. Download the appropriate version from apkmirror:
http://www.apkmirror.com/?s=Google+play+services&post_type=app_release&searchtype=apk
Click to expand...
Click to collapse
i see you're french too : do you know how to make it work when your phone system language is french ?
my build prop is ready to get google assistant, but when i got to google app setting, it says "google assistant not available in your country" and the google asssistant setting are greyed.
maybe there's a way to use google assistant (and google app) in english, and the rest of the phone in french ?
neeko92 said:
i see you're french too : do you know how to make it work when your phone system language is french ?
my build prop is ready to get google assistant, but when i got to google app setting, it says "google assistant not available in your country" and the google asssistant setting are greyed.
maybe there's a way to use google assistant (and google app) in english, and the rest of the phone in french ?
Click to expand...
Click to collapse
I don't need assistance and to be honest, I've never looked into it.
Maybe try to setup the assistant with English language first? And once everything works, try switching system language?
I'd try this way. Maybe open a thread in Q/A section to see if people managed to get it working with foreign system language.
That's great, got it to update now. Will the battery take a hit of the "OK Google" recognition is left on?
I've added the line, updated play services, ran full aroma installer for gapps, still no assistant. Running Alcatel Idol 3 on lineage os 13.
Any thoughts or suggestions?
Updated to latest Google play services, added line to build.prop and still no assistant. Root Stock ROM 6.0.1 September security patch.
Sent from my Nexus 6P using XDA-Developers Legacy app
Right after I installed the March OTA I got assistant. I didn't do anything else. I'm not rooted.
TokedUp said:
Right after I installed the March OTA I got assistant. I didn't do anything else. I'm not rooted.
Click to expand...
Click to collapse
I just flashed the March update and re-rooted, and I have assistant now. Was going to edit the build prop, but apparently the update enables it.
supermoocow5 said:
I just flashed the March update and re-rooted, and I have assistant now. Was going to edit the build prop, but apparently the update enables it.
Click to expand...
Click to collapse
Were you prompted to setup Google Assistant? I just updated to the March OTA manually on my 6p in hopes it would help me get Google Assistant sooner. I understand the two might not be dependent on one another but it didn't work for me. I'm using Nova launcher and when I long press the middle Circle button, it only pulls up On Tap.
No need anymore.... my 6P just got GA live just now.
Do you need root to make the edits? I tried to edit but it won't save the file.
mreediowa said:
Do you need root to make the edits? I tried to edit but it won't save the file.
Click to expand...
Click to collapse
Yes.
I had it working, but the March update has removed it again. I've updated build.prop again and it's come back.

[Universal Script S6/S6 Edge] UniMod V1.1 Updated (Debloat+Root+Busybox+AdBlock+More)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UniMod script is compatible with all official firmwares S6 G920x / S6 EDGE G925x​
Features:
AutoRoot Galaxy S6 920x - Galaxy S6 EDGE 925x
Auto Debloat (Remove GApps, Samsung Bloatware, Microsoft Apps)
Remove OTA Updates Support (Root=No OTAs)
BusyBox Support
Remove Knox
Block Host ADs
Build.prop Tweaks
CSC Mods
Google Apps Removed (Aviable in Play Store)
Chrome
ChromeCustomizations
Drive
Gmail2
Hangouts
Maps
Music2
Photos
Videos
YouTube
Google Search
Microsoft Apps Removed (Aviable in Play Store)
Excel
Word
PowerPoint
Skype
OneDrive
OneNote
Samsung Bloatware (Aviable in Play Store and Gallaxy Apps)
Facebook
WhatsApp
Instagram
Flipboard Briefing
Beam Service
Axel Springer (uplay)
SamsungPayStub
GalaxyCare
MobilePrint Samsung
And more
Bulid.prop tweaks
WiFi scan interval
Call ring delay
Sensor proximity
Jpeg Quality
CSC Feature Mods
Call Rec
Camera Shutter
Web option to terminate
Camera during call
Disable menu software update
NFC Icon Status Bar
Wifi Support Advanced Menu
Recent App Protection
SmartManager Disable AntiMalware
Assistance AppChooser
Force Connect MMS
Message Save and Restore in SDCard
Enable Menu Block Call and Msg
Disable FindMyMobile
Camcorder Do Not Pause Music
Camera Quality Superfine
Disable Magazine Home
Enable Ui Display Mirroring
and more...
Installation:
1- Install Firmware on your taste
2- Install Custom Recovery (TWRP)
3- Install
Works Only On Nougat
New UniMod V1.1 https://mega.nz/#!LFZx1A4K!0FCl7Ic19Ydk1XqXzIjyEBAvfdnQplJF7VdMdb9-drY
Changelog V1.1
Updated Magisk to v12.0
Added Dropbox
Added Google Play Books
Added Google+
Credits
All Credits Goes to @core720
I just ported it for users who wants to use this script
Looks like no one tried this so I am the lab mouse. I have a G920F and was waiting for a stock-like modified Nougat ROM. After a week or two, I went another route -- flashed a stock ROM and used this script.
Since Nougat for Galaxy S6 is not yet out in my country, I used XEF firmware from France. After flashing and without deleting cache/data, it just upgraded my existing Marshmallow ROM and worked just fine.
Then I went to TWRP, did a factory reset and flashed this debloat script. I can say that after initial setup and a day of usage, everything seems to work.
Thx for the script, works good. But after magisk update, it says "no root" in the magisk app. Any ideas?
chillje said:
Thx for the script, works good. But after magisk update, it says "no root" in the magisk app. Any ideas?
Click to expand...
Click to collapse
Remove OTA Updates Support (Root=No OTAs)
goatface2106 said:
Remove OTA Updates Support (Root=No OTAs)
Click to expand...
Click to collapse
The new update from Magisk-SU in the Magisk-Manager app works great.
My device is now on N7 with Magisk 12
---------- Post added at 07:04 AM ---------- Previous post was at 06:46 AM ----------
So after some problems, here is my short test of the script:
My device: G925F
My steps.
1. ODIN flash with the new german N7 version from vodafone
2. ODIN flash from the newest version of TWRP (3.1.0.0)
3. Wiped all partitions on the phone (including "internal sdcard")
4. Changed internal SDCARD from S2FS to EXT4
5. Mounted the device via cable to pc an transmit this script.
6. Flashed the script (no errors on the display)
7. Restard and booted the first time in my new Android 7
Magisk V.12 is ready to update via OTA
Here some problems I have found:
enesuzun2002 said:
Features:
Auto Debloat (Remove GApps, Samsung Bloatware, Microsoft Apps) -> Some problems here
Remove Knox -> Knox is not removed
Microsoft Apps Removed (Aviable in Play Store)
OneNote -> is installed
Bloatware on my phone
Dropbox
Vodafone Apps ("Start" and "Zubehör" (equipment in english))
Google+
Samsung Kalender
Google Play Books
Google Play Kiosk
Samsung SHealth
Click to expand...
Click to collapse
I have removed the bloatware with an "Root Installer" from Google Play Store.
Now I'm searching for a "Reboot Menu" in Nougat
chillje said:
The new update from Magisk-SU in the Magisk-Manager app works great.
My device is now on N7 with Magisk 12
---------- Post added at 07:04 AM ---------- Previous post was at 06:46 AM ----------
So after some problems, here is my short test of the script:
My device: G925F
My steps.
1. ODIN flash with the new german N7 version from vodafone
2. ODIN flash from the newest version of TWRP (3.1.0.0)
3. Wiped all partitions on the phone (including "internal sdcard")
4. Changed internal SDCARD from S2FS to EXT4
5. Mounted the device via cable to pc an transmit this script.
6. Flashed the script (no errors on the display)
7. Restard and booted the first time in my new Android 7
Magisk V.12 is ready to update via OTA
Here some problems I have found:
I have removed the bloatware with an "Root Installer" from Google Play Store.
Now I'm searching for a "Reboot Menu" in Nougat
Click to expand...
Click to collapse
ı will take a look at it tomorrow
Tested on Stock XEF 7.0 Firmware. It's working good, i only had to reflash magisk v12.0, but no errors or bugs.
I have a question.. how can i edit this script to delete more apps? Like Google Music, Games exc.
Tia
stock97 said:
Tested on Stock XEF 7.0 Firmware. It's working good, i only had to reflash magisk v12.0, but no errors or bugs.
I have a question.. how can i edit this script to delete more apps? Like Google Music, Games exc.
Tia
Click to expand...
Click to collapse
just edit the updater script
enesuzun2002 said:
just edit the updater script
Click to expand...
Click to collapse
I don't know how to compile/decompile.. can i do it directly in the zip?
stock97 said:
I don't know how to compile/decompile.. can i do it directly in the zip?
Click to expand...
Click to collapse
Just updated script check it please
enesuzun2002 said:
Just updated script check it please
Click to expand...
Click to collapse
I flashed the 1.1. Still no problems. I suggest you to add these apps:
-SHealth
-Play Movies
-Play News
-Play Music
-Play Games
-One Note
-One Drive
-Google+
-Powerpoint
-Word
-Excel
.. there are more that i don't remember at the moment..
enesuzun2002 said:
Just updated script check it please
Click to expand...
Click to collapse
Have you found the problems with "remove knox"?
I see "Knox-Version 2.7.1" in my Softwareinfo.
So I think KNOX is installed.
chillje said:
Have you found the problems with "remove knox"?
I see "Knox-Version 2.7.1" in my Softwareinfo.
So I think KNOX is installed.
Click to expand...
Click to collapse
it removes all the knox apks so dont care that
I've flashed V1.1, but i have issue with samsung account, it keeps giving me session expired, and i can't login to samsung account.
EDIT :
It appears that flashing the TWRP 3.1.0 through ODIN breaks samsung account, any suggestion to fix it ?
EDIT 2 [FIX] :
I've managed to get it fixed by wiping the data for "Samsung Account" app using Titanium Backup
Does this rom work with S6 G9200 (dual Sim)?
please advise. Thanks
Please fix the samsung account....
jimmymyx said:
Please fix the samsung account....
Click to expand...
Click to collapse
that is not scripts problem it happens when you root your phone please check this thread
https://forum.xda-developers.com/galaxy-s6/general/fix-samsung-account-login-password-loop-t3575443 by @ljaz_farooq
DoO37 said:
I've flashed V1.1, but i have issue with samsung account, it keeps giving me session expired, and i can't login to samsung account.
EDIT :
It appears that flashing the TWRP 3.1.0 through ODIN breaks samsung account, any suggestion to fix it ?
Click to expand...
Click to collapse
a full reset after twrp flash....
Any idea why i lost the google assistant after this tool?
enesuzun2002 said:
that is not scripts problem it happens when you root your phone please check this thread
https://forum.xda-developers.com/galaxy-s6/general/fix-samsung-account-login-password-loop-t3575443 by @ljaz_farooq
Click to expand...
Click to collapse
ererte said:
a full reset after twrp flash....
Click to expand...
Click to collapse
Just use Titanium Backup to wipe the data for Samsung Account.
Go to "Backup/Restore", open "Samsung account", click on "Wipe Data"
Then re-login and everything should work fine.
it worked for me.

[GUIDE] How to Pass SafetyNet on Xiaomi.eu

After you root Xiaomi.EU on our Poco X3, ctsProfile check from our beloved Google friends get "False" status.
How to solve? Not hard at all.
1) Install MagiskHide Props Config module from Magisk repository
2) Install Busybox from Magisk repository
3) Install Termux from Google Play Store
4) Reboot
5) Open Termux and type: "su" + Enter + "props" + Enter
6) Now you have MagiskHide Props menu open under the terminal
7) Press option 1 - "Edit Device Fingerprint"
8) Press option f - "Pick a Device Fingerprint"
9) Press option 22 - "POCO"
10) Press option 3 - "POCO X2" (our X3 is still not in the repository - X2 works just fine as you can theoretically even choose any device fingerprint)
11) Reboot
12) Open Termux and type: "su" + Enter + "props" + Enter
13) Now you have MagiskHide Props menu open under the terminal
14) Press option 2 - "Force BASIC key attestation"
15) Press option f - "Pick from device list"
16) Press option 22 - "POCO"
17) Press option 3 - "POCO X2" (our X3 is still not in the repository - X2 works just fine as you can theoretically even choose any device fingerprint)
18) Reboot
19) Open Magisk, Select "Tap to Start SafetyNet check" and you should get it all green like I got
Cheers :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 5104495
Tried it, unfortunately ctsProfile is still false.
Google rolled out hardware attestation which makes it hard for magisk to hide root and unlocked bootloader..
Im on xiaomi.eu rom and this works like charm thanks for sharing
piranime said:
Im on xiaomi.eu rom and this works like charm thanks for sharing
Click to expand...
Click to collapse
works for me too! thx!
Working, MIUI EU Rom, thanks!
Worked for me to activate Google pay for NFC.
Thank you!
Is this working for official global rom rooted?
Can someone tell me exactly what version of TWRP are you using( working format data, wipes,Etc) and what EU rom link I don't see on the official page...
Does it comes with OTA( obviously based on global there isn't chinese rom, but there is a stable and weekly) ? we lose L1 right ? ... Good time to start a persist partition backup?
Sadly it doesn't really work finally when you try to pay on a store. I'll leave some screenshots about why this is happening. I tried with various stores and It simply won't make the payment no matter how you try or how you touch the permissions battery options etc
This tutorial only lets you to add the cards successfully to google pay, but you can't pay with any of them on stores. (me at least, can anyone else confirm?)
I'ts pretty sad since I really love xiaomi.eu, but I think that, again, I will have to roll back to stock rom sadly until this problem get fixed at all.
@kralde
- in apps open google pay and delete data
- in apps open google play services and delete data
Then restart the setup in google pay.
kralde said:
Sadly it doesn't really work finally when you try to pay on a store. I'll leave some screenshots about why this is happening. I tried with various stores and It simply won't make the payment no matter how you try or how you touch the permissions battery options etc
This tutorial only lets you to add the cards successfully to google pay, but you can't pay with any of them on stores. (me at least, can anyone else confirm?)
I'ts pretty sad since I really love xiaomi.eu, but I think that, again, I will have to roll back to stock rom sadly until this problem get fixed at all.
Click to expand...
Click to collapse
There has to be more you need to do, mine looks like this..
What happens when you tap on "Not Set"?
StroyYa said:
@kralde
- in apps open google pay and delete data
- in apps open google play services and delete data
Then restart the setup in google pay.
Click to expand...
Click to collapse
Tried,with no success at all. same results
thanks!
---------- Post added at 03:53 PM ---------- Previous post was at 03:52 PM ----------
keenan316 said:
There has to be more you need to do, mine looks like this..
What happens when you tap on "Not Set"?
Click to expand...
Click to collapse
Hello, nothing happens
I already rolled back. I guess I will try again another day. Thanks for your help !
kralde said:
Tried,with no success at all. same results
thanks!
---------- Post added at 03:53 PM ---------- Previous post was at 03:52 PM ----------
Hello, nothing happens
I already rolled back. I guess I will try again another day. Thanks for your help !
Click to expand...
Click to collapse
@kralde I had the exact problem as you, try this:
- in apps open google pay and delete data
- in apps open google play services and delete data
- reboot your phone
Then restart the setup in google pay.
Helped me
More easy :
Hide Magisk Manager on settings of Magisk Manager
Install this module
Done
Thanks to all of you. I'm flashing it right now. When I finish all the setup, I will try all of your recomendations and will tell you if it works later.
thanks!
---------- Post added at 10:31 AM ---------- Previous post was at 10:07 AM ----------
billouetaudrey said:
More easy :
Hide Magisk Manager on settings of Magisk Manager
Install this module
Done
Click to expand...
Click to collapse
Tried this before clearing data on google Pay ,etc. Did not worked, sadly.
---------- Post added at 10:32 AM ---------- Previous post was at 10:31 AM ----------
jeryll said:
@kralde I had the exact problem as you, try this:
- in apps open google pay and delete data
- in apps open google play services and delete data
- reboot your phone
Then restart the setup in google pay.
Helped me
Click to expand...
Click to collapse
Hello,
sadly, this didn't worked as well.
I'm getting the same as in my previous screenshot "Not set up" and "your phone doesn't meet the security etc"
Still have to try to pay somewhere later, but it seems bad.
I guess I'm stuck without Google Pay with this rom.
Thanks anyway all of you for your help!
EDIT: Ok guys, tried again deleting google Pay app, reinstalled it, and in the middle of the set up, it auto closes itself, and when I opened again it was in Spanish (which is normal, since that was my system language, but was on english before) , after that, everything is working! At least it seems so, will try to pay somewhere later
Thanks a lot!!
kralde said:
Thanks to all of you. I'm flashing it right now. When I finish all the setup, I will try all of your recomendations and will tell you if it works later.
thanks!
---------- Post added at 10:31 AM ---------- Previous post was at 10:07 AM ----------
Tried this before clearing data on google Pay ,etc. Did not worked, sadly.
---------- Post added at 10:32 AM ---------- Previous post was at 10:31 AM ----------
Hello,
sadly, this didn't worked as well.
I'm getting the same as in my previous screenshot "Not set up" and "your phone doesn't meet the security etc"
Still have to try to pay somewhere later, but it seems bad.
I guess I'm stuck without Google Pay with this rom.
Thanks anyway all of you for your help!
EDIT: Ok guys, tried again deleting google Pay app, reinstalled it, and in the middle of the set up, it auto closes itself, and when I opened again it was in Spanish (which is normal, since that was my system language, but was on english before) , after that, everything is working! At least it seems so, will try to pay somewhere later
Thanks a lot!!
Click to expand...
Click to collapse
Good to here you are making progress! Hope payments go through this time!
Well, sad ending for this story
After trying payments in about 3 different stores, the payments just fail. It doesn't complete the payment at all, even showing all the config and etc ok.
I wanna thank you all for all your help.
I decided to move finally to the stock global until this problem is fixed directly in the rom itself (if eveR)
Thanks a lot and sorry for taking your time helping me!
With this: https://forum.xda-developers.com/apps/magisk/magisk-google-pay-gms-17-1-22-pie-t3929950 , Google Pay workes fine on my rooted Poco. (Even with ctsProfile false)
Flixnet said:
With this: https://forum.xda-developers.com/apps/magisk/magisk-google-pay-gms-17-1-22-pie-t3929950 , Google Pay workes fine on my rooted Poco. (Even with ctsProfile false)
Click to expand...
Click to collapse
Here's the method put into an easy to install magisk module.

Categories

Resources