Hey guys,
I was running the latest Viper rom. Every great once in a while the phone would just turn off. I could get it back fine and this happened about 5-6 times. Today the phone got stuck in a boot loop. I figured something went wrong.
I attempted to restore the phone to stock using the RUU thread found here: http://forum.xda-developers.com/showthread.php?t=2152993
I restored it once fine, said it was good. Phone only rebooted over and over. The HTC logo came up 3-4 times then screen went blank. So I flashed again. Same thing, nothing.
Now I had been playing around and think I updated my radio. Now the RUU from that thread above says it cannot upgrade my phone. I can get to fastbook and lock and unlock the bootloader. I did install latest TWRP but it never enters recovery. I had hoped to just install a basic rom from the 2.04 update and be done. But I cannot get into recovery.
I'm stuck and don't know what else to do. Is there and RUU file like the one above for the new 2.04?
I still think something else is wrong with this phone. Somehow doubt VZW will take it back and exchange.
S-ON
Phone displays HBOOT-1.33.0001
RADIO-1.01.01.0110
Any ideas what I can do next please?
I think the radio got updated when I tried to do S-OFF. Instead of an error at step 3 it flashed. Now I've gone back and tried it again and though I get the proper errors is still shows S-ON. Maybe this isn't even needed. I think my days of tinkering with Android should be over. I can follow guides and such
When I try to enter recovery for TWRP I get a lot of colored lines. Going to try reflashing that and see what gives. I feel that if I could get into TWRP and get a rom file on the phone since I cannot get into Android I might have a chance.
Tersanyus said:
I think the radio got updated when I tried to do S-OFF. Instead of an error at step 3 it flashed. Now I've gone back and tried it again and though I get the proper errors is still shows S-ON. Maybe this isn't even needed. I think my days of tinkering with Android should be over. I can follow guides and such
When I try to enter recovery for TWRP I get a lot of colored lines. Going to try reflashing that and see what gives. I feel that if I could get into TWRP and get a rom file on the phone since I cannot get into Android I might have a chance.
Click to expand...
Click to collapse
Did you take the verizon update as you mentioned 2.04? If you did you will have to wait a bit yet to root again. Your only option would be stock verizon. Their software update basically closed the previously open window. If not...You HAVE updated radio per the # you posted, not sure if that really matters with regard to recovery. It seems like you have compounded many issues. I would try relocking bootloader and flash stock RUU again. Try to get back to stock verizon. If that's a no go, would try reflashing old radio and try stock ruu. How are you getting to try bootloader/recovery, turning on phone holding down vol button? Last ditch if it's says s-on and locked, I think you would be ok to try for a new phone.
I did not take the OTA from Verizon. I never got any prompt for an update. I did the updates for Viper that turned I think just turned that off.
Getting to bootloader is fine. I can lock it and unlock it fine. I know the RUU only loads if locked. I know recovery can only be installed if unlocked I believe. And yes I do that from vol down plus power button.
If I use newest TWRP recovery just gives a whole bunch of colored lines. If I try 2.4.0.0 I can see TWRP come up briefly then the phone reboots again.
The RUU exe file just now gives error 158. Basically it thinks it is not the correct ROM
I found the 1.15 radio but it won't flash. http://forum.xda-developers.com/showpost.php?p=38379254&postcount=19
Just gives error of FAILED remote: 92 supercid
Tersanyus said:
The RUU exe file just now gives error 158. Basically it thinks it is not the correct ROM
I found the 1.15 radio but it won't flash. http://forum.xda-developers.com/showpost.php?p=38379254&postcount=19
Just gives error of FAILED remote: 92 supercid
Click to expand...
Click to collapse
Is there a boot.img for the ruu? Maybe the previous boot image is still directing the process, a thought at least. Also that error 92 cid MAY be the issue, Do you have the newest one on (cid)? I had a lot of issues getting s-off and had to run supercid again to run the process after several error 92 messages. I would look at the whole s-off thread in original dev section maybe some answers in there or a direction to head in.
---------- Post added at 10:39 AM ---------- Previous post was at 09:48 AM ----------
rootntootn said:
Is there a boot.img for the ruu? Maybe the previous boot image is still directing the process, a thought at least. Also that error 92 cid MAY be the issue, Do you have the newest one on (cid)? I had a lot of issues getting s-off and had to run supercid again to run the process after several error 92 messages. I would look at the whole s-off thread in original dev section maybe some answers in there or a direction to head in.
Click to expand...
Click to collapse
Can you get to fastboot? adb can communicate with the phone? Says in red fastboot usb? Also how are you doing RUU, assuming your using executable from your pc? Forgot to ask..
Yes I can get to fastboot fine. I do a "fastboot devices" and it is read. adb doesn't seem to do anything though. The RUU is the .exe I found.
For the cid I did the old one so mine reads all 1's. I didn't think I could so the new cid as I cannot boot into Android at all.
Ok success!! Yes.
I did the S-OFF directions once. Nothing, no change.
Did it again this time it booted to factory rom.
I am S-OFF cid is all ones.
I got the prompt for the OTA update, took ot, phone rebooted to recovery, TWRP, then nothing.
Wifi not working, I know I read about that so looks like I have a little more work.
Tersanyus said:
Ok success!! Yes.
I did the S-OFF directions once. Nothing, no change.
Did it again this time it booted to factory rom.
I am S-OFF cid is all ones.
I got the prompt for the OTA update, took ot, phone rebooted to recovery, TWRP, then nothing.
Wifi not working, I know I read about that so looks like I have a little more work.
Click to expand...
Click to collapse
Not sure how you got there s-off should have all 2's....but it sounds like progress. If you are back to recovery and have a rom to flash in your phone that's great...but you'll need adb working to flash the image file that's associated with it, that will likely fix your wifi issue as well. Even with S-off most of the roms still need to have their respective image files flashed but I am unsure about stock RUU, someone with more experience may know that answer and can maybe steer you in the right direction...
Tersanyus said:
Ok success!! Yes.
I did the S-OFF directions once. Nothing, no change.
Did it again this time it booted to factory rom.
I am S-OFF cid is all ones.
I got the prompt for the OTA update, took ot, phone rebooted to recovery, TWRP, then nothing.
Wifi not working, I know I read about that so looks like I have a little more work.
Click to expand...
Click to collapse
If you have a custom recovery then you can't install the ota. If you want the ota stuff you can install the Rom kernel and radio from it.
As far as wifi not working, just flash a kernel, right now it sounds like you have the modules from one kernel and the boot.img from another.
Sent from my HTC6435LVW using xda app-developers app
---------- Post added at 09:43 PM ---------- Previous post was at 09:40 PM ----------
rootntootn said:
Not sure how you got there s-off should have all 2's....but it sounds like progress. If you are back to recovery and have a rom to flash in your phone that's great...but you'll need adb working to flash the image file that's associated with it, that will likely fix your wifi issue as well. Even with S-off most of the roms still need to have their respective image files flashed but I am unsure about stock RUU, someone with more experience may know that answer and can maybe steer you in the right direction...
Click to expand...
Click to collapse
You don't need all 2s to get s off, you can do it with all ones without a problem.
Sent from my HTC6435LVW using xda app-developers app
Bigandrewgold said:
If you have a custom recovery then you can't install the ota. If you want the ota stuff you can install the Rom kernel and radio from it.
As far as wifi not working, just flash a kernel, right now it sounds like you have the modules from one kernel and the boot.img from another.
Sent from my HTC6435LVW using xda app-developers app
---------- Post added at 09:43 PM ---------- Previous post was at 09:40 PM ----------
You don't need all 2s to get s off, you can do it with all ones without a problem.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
BTW There was nothing wrong with your phone, it's just that when you restored, you needed to flash the boot.img from your rom that you restored. It was most likely a kernel issue that we could correct with viper.
It sounds like you just need to install the matching rom and boot.img. If you're s off, just fastboot flash the boot.img for whatever rom you currently have installed. For the OTA update, you can install the radios without an RUU if you're s off.
I ran for several hours and several reboots on the RUU .exe file. When I downloaded a custom rom from http://forum.xda-developers.com/showthread.php?t=2150262 - That fan fine for an hour or so. Then boot loop over and over again. Thankfully I made a backup in twrp. I restored that and all is well.
I can't stand this factory rom, the part that really annoys me, besides the VZW bloat, is the recent apps button. For over a year with other HTC's I am used to making that the menu button. Had that in the custom rom.
So it looks like that rebooting loop just means I need to fastboot the boot.img?
I go back to the rom I linked about and fastboot the boot.img. I really liked viper rom but am going to stick to stock that is rooted and debloated.
My cid is all 1's since I did that before all this OTA came out. I did that about 3 weeks ago the day I got the phone.
Thanks for the tips. I'll let you know what happens when I go back to the rom above.
Bigandrewgold said:
If you have a custom recovery then you can't install the ota. If you want the ota stuff you can install the Rom kernel and radio from it.
As far as wifi not working, just flash a kernel, right now it sounds like you have the modules from one kernel and the boot.img from another.
Sent from my HTC6435LVW using xda app-developers app
---------- Post added at 09:43 PM ---------- Previous post was at 09:40 PM ----------
You don't need all 2s to get s off, you can do it with all ones without a problem.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Sorry about the 2's info but read that the older cid apk would no longer work (from thread below) and myself put on the new one which yields the all 2's. Bottom line, glad you made progress, hopefully problem resolved
http://forum.xda-developers.com/showthread.php?t=2109862
Related
I was wondering if it was possible for the whole entire internal part of the phone to return to the way it was out of the box. I have a messed up MainVer (which ive looked at the recent thread to fix it, attempted it, and got no luck {after multiple tries} in fixing mine), my bootloader/fastboot is unlocked (i am able to relock easily), have Amon recovery (want to get rid of it, but when trying to flash the stock recovery in hboot/command, it cant find the fastboot and wont flash it {i have also attempted this multiple times}). Lastly, no RUUs work for me {attempted multiple times too}. I know I have probably got some developers mad because of all the questions i've asked about how to do all this, so im going to try to stop that now. I am just looking for a detailed guide on how to return hboot/bootloader/fastboot, recovery, rom, kernel, boot and anything else, back to complete stock. Thanks
willsully1221 said:
I was wondering if it was possible for the whole entire internal part of the phone to return to the way it was out of the box. I have a messed up MainVer (which ive looked at the recent thread to fix it, attempted it, and got no luck {after multiple tries} in fixing mine), my bootloader/fastboot is unlocked (i am able to relock easily), have Amon recovery (want to get rid of it, but when trying to flash the stock recovery in hboot/command, it cant find the fastboot and wont flash it {i have also attempted this multiple times}). Lastly, no RUUs work for me {attempted multiple times too}. I know I have probably got some developers mad because of all the questions i've asked about how to do all this, so im going to try to stop that now. I am just looking for a detailed guide on how to return hboot/bootloader/fastboot, recovery, rom, kernel, boot and anything else, back to complete stock. Thanks
Click to expand...
Click to collapse
I think your confusing some terms and what your trying to do to begin with.
Since your unlocked you had to have had fastboot on your computer and HTC drivers installed so you have to have fastboot or you wouldn't have been able to unlock.
Unfortunately, until the new RUU is released you have to fix the mainver before you can RUU and that is the only thing that will return you to stock unless you made a backup of the stock rom after you unlocked.
mjh68 said:
I think your confusing some terms and what your trying to do to begin with.
Since your unlocked you had to have had fastboot on your computer and HTC drivers installed so you have to have fastboot or you wouldn't have been able to unlock.
Unfortunately, until the new RUU is released you have to fix the mainver before you can RUU and that is the only thing that will return you to stock unless you made a backup of the stock rom after you unlocked.
Click to expand...
Click to collapse
Sorry for the confusion. Ive confused myself too. But ive gone through the whole mainver fix thread multiple times and think my mainver is fixed. When i run the ruu, sometimes it says i have the stock mainver and other times i have the ics mainver. I really want the my phone completely clean, but this is so confusing. (Thunderbolt {my last phone} was nothing like this with root)
willsully1221 said:
Sorry for the confusion. Ive confused myself too. But ive gone through the whole mainver fix thread multiple times and think my mainver is fixed. When i run the ruu, sometimes it says i have the stock mainver and other times i have the ics mainver. I really want the my phone completely clean, but this is so confusing. (Thunderbolt {my last phone} was nothing like this with root)
Click to expand...
Click to collapse
Which RUU are you trying to run ? Be careful with the mainver fix you can hard brick your phone if you mess it up. Otherwise I am not sure.. you are relocked when you are trying to do the RUU correct ?
RUU will only run on the phone if it is relocked and has stock recovery on it. It won't run on a custom recovery such as Amon Ra or Clockwork.
There is a post that contains a complete set of tools needed to run adb and fastboot. i will see if I can find it ..
---------- Post added at 02:50 PM ---------- Previous post was at 02:40 PM ----------
I am not sure how to link, but it is in rezound android development . The title of the post is Stock rooted OTA firmware.. on the last page Feralicious posted the tools and instructions. Set up those tools and you will be able to flash the stock recovery , relock and RUU.
mjh68 said:
Which RUU are you trying to run ? Be careful with the mainver fix you can hard brick your phone if you mess it up. Otherwise I am not sure.. you are relocked when you are trying to do the RUU correct ?
RUU will only run on the phone if it is relocked and has stock recovery on it. It won't run on a custom recovery such as Amon Ra or Clockwork.
There is a post that contains a complete set of tools needed to run adb and fastboot. i will see if I can find it ..
---------- Post added at 02:50 PM ---------- Previous post was at 02:40 PM ----------
I am not sure how to link, but it is in rezound android development . The title of the post is Stock rooted OTA firmware.. on the last page Feralicious posted the tools and instructions. Set up those tools and you will be able to flash the stock recovery , relock and RUU.
Click to expand...
Click to collapse
Thank you, that helped me a lot, thanks!
Hey Guys, fairly new to posting here, but was hoping this could help some of you.
#####################################################################
# If you are running a stock ROM you can ignore this, there are better threads for you out there.
#####################################################################
When the OTA came out I knew I wanted the new radios, but have had nothing but problems putting them on.
I have spent the last couple of hours reading and generally just being frustrated. I eventually got to the conclusion I wanted and I thought having all of this OTA update junk in one place might be helpful for others.
History:
- I was running Ineffabilis 12/29. (great ROM)
- Went to Senseless ICS (great ROM, bluetooth problems, persistent with all current ICS's, was insurmountable for me)
- Went to Team BAMF Rezound Cubed ROM, used this ROM to get out of the ICS trap because it flashes a kernel after it flashes the ROM.
Coming From ICS, Team BAMF Cubed or the New clean GB rom:
If you have installed a ROM that updated the Main Ver (all ICS roms or Team BAMF rom, or the new clean GB rom, then you will need to reset the main ver to 1.00.000.00 to run the RUU.
To do that go to this thread: http://forum.xda-developers.com/showpost.php?p=21875151&postcount=1
Next:
Once you have your main ver set to 1.00.000.00. You will need to follow these instructions:
http://forum.xda-developers.com/showthread.php?t=1466474 (summary below)
1) You will need to reflash the stock recovery (a great way to do that is using Cleanflash, get it here: http://www.scottsroms.com/downloads.php?do=file&id=57) -- You can find the stock flash recovery image in the thread above.
2) Reboot to Fastboot and run "fastboot oem lock" from your DOS command line. This will reboot your phone back into fastboot/hboot.
3) Run the RUU.exe from Windows using the download from scottsroms here: http://www.scottsroms.com/downloads.php?do=cat&id=11
4) Go through and install the OTA updates. Go to settings, and software update.
5) Go back to HTCDev.com and unlock the bootloader as you have in the past.
6) Flash a new recovery.img, such as amonRa, (fastboot flash recovery nameofrecovery.img)
7) The world is now yours! Install ICS if you would like or any other ROM or install su if you prefer.
Credits:
!! mrbracht for the mainver fixed (saved my bacon)
!! FlyHalf205 for the rest of this
!! scrosler for generally being awesome and all the great tool's, roms, ruu, etc.
I've downloaded the recovery and unziped it. Then I moved it to fastboot but when I type fastboot flash recovery recovery_sign.img I get a error cannot load.
FlagAZ said:
I've downloaded the recovery and unziped it. Then I moved it to fastboot but when I type fastboot flash recovery recovery_sign.img I get a error cannot load.
Click to expand...
Click to collapse
The stock recovery? What mainversion are you?
I checked today it was something like 1.0.6. I know that it was not updated.
---------- Post added at 10:27 PM ---------- Previous post was at 10:24 PM ----------
I've been trying all day with no like...... I'm lost with all the post about how to do this (flash this, unload this, do it this way)......
okay so what is the text of the error?
i keep getting hung up in the RUU... my MainVer is the same version as the RUU, or was, but now i can't reboot my phone, just tuck in bootloader/fastboot, and with the stock recovery lol...
my ADB won't open either
---------- Post added at 09:26 PM ---------- Previous post was at 08:39 PM ----------
platinumrims said:
i keep getting hung up in the RUU... my MainVer is the same version as the RUU, or was, but now i can't reboot my phone, just tuck in bootloader/fastboot, and with the stock recovery lol...
my ADB won't open either
Click to expand...
Click to collapse
pah, gave up. unlocked reflashed amon ra, and restored my nandroid... :'(
Maybe this reply is too late. Sorry...
But, was it locked and having the stock recovery when you were trying the RUU? Also you run the RUU from windows while the phone is in hboot mode.
pngwyn said:
Also you run the RUU from windows while the phone is in hboot mode.
Click to expand...
Click to collapse
Yes, that is how I always do it.
Wow. I'm impressed with the details you provided. I was debating flashing ICS and had questions about going back. You answered all my questions. Thanks for posting your findings. I really appreciate it.
Updated
So by resetting the mainver, will I be able to flash ICS then say Ineffabilis 12/29 without worrying about updating any kernels? Also, just to confirm, once I flash ICS, I'd have to reset the mainver before going back to Ineffabilis 12/29.
Sent from my ADR6425LVW using xda premium
I go back and forth between ics and gb roms without any issues, never got a mainver error.
Sent from my HTC Rezound using XDA Premium
raider3bravo said:
Wow. I'm impressed with the details you provided. I was debating flashing ICS and had questions about going back. You answered all my questions. Thanks for posting your findings. I really appreciate it.
Updated
So by resetting the mainver, will I be able to flash ICS then say Ineffabilis 12/29 without worrying about updating any kernels? Also, just to confirm, once I flash ICS, I'd have to reset the mainver before going back to Ineffabilis 12/29.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Glad you found the post useful.
As far as I understand, you won't have any issues switching between GB and ICS and back to GB (other than needing to make sure you are running a compatible kernel). If you go back to ineffabilis after ICS you will need to find a way to get the kernel on the system (probably through fastboot or adb) and then flash ineffabilis, for me it was easiest to go back to GB using team bamf because it included the kernel and then you could flash ineffabilis and all should have been well.
The real reason to worry about main ver (as far as I know) is so that you can flash the ruu and return to stock. I guess there are also some other problems with kernels and them checking what mainver you have before flashing, but I am not familiar with those issues.
The nice thing is with the mainver hack above you won't ever have to worry by resetting the mainver, pushing the stock recovery, relocking and then flashing using the RUU utility it is possible to get completely back to factory condition.
Best Regards!
pngwyn said:
Maybe this reply is too late. Sorry...
But, was it locked and having the stock recovery when you were trying the RUU? Also you run the RUU from windows while the phone is in hboot mode.
Click to expand...
Click to collapse
I was using the ruu on Windows and had my phone in Hboot.
I relocked it, via an app someone made here on the forums because I couldn't get ADB to run at all. It would flash up in a window and close immediately. And I re installed SDK 10 Times and couldn't ever get adb to re instal or update.
Also had the stock recovery flashed...
When I used the app to relock the phone I had a "security warning" message under the relock status in fastboot, dunno if that's normal.
Then when trying to run the ruu I got a 155 error, but it wasn't the same one as listed in the report, or it didn't say the same thing at least. Then I kept getting battery lower than 30% errors so it wouldn't let me redo it after the 3rd try. Even though my phone was at like 85% when I got frustrated and decided booted it back up...
I'd like to try it again some other time but idk what else to do to get my ADB functioning ATM so I can check or change my MainVer (which was the same version as the ruu, also dunno if that mattered, I just though as long as it wasn't higher the ruu would work)
Any info would be mucho appreciated lol. :banghead:
platinumrims said:
I was using the ruu on Windows and had my phone in Hboot.
I relocked it, via an app someone made here on the forums because I couldn't get ADB to run at all. It would flash up in a window and close immediately. And I re installed SDK 10 Times and couldn't ever get adb to re instal or update.
Also had the stock recovery flashed...
When I used the app to relock the phone I had a "security warning" message under the relock status in fastboot, dunno if that's normal.
Then when trying to run the ruu I got a 155 error, but it wasn't the same one as listed in the report, or it didn't say the same thing at least. Then I kept getting battery lower than 30% errors so it wouldn't let me redo it after the 3rd try. Even though my phone was at like 85% when I got frustrated and decided booted it back up...
I'd like to try it again some other time but idk what else to do to get my ADB functioning ATM so I can check or change my MainVer (which was the same version as the ruu, also dunno if that mattered, I just though as long as it wasn't higher the ruu would work)
Any info would be mucho appreciated lol. :banghead:
Click to expand...
Click to collapse
I am not familiar with anything you experienced.
You shouldn't need adb for anything you are trying to do. It doesn't sound like you are getting the mainver error (if you were you would be getting the error after trying to go through the RUU wizard and it actually tells you your mainver is 2.00.###.## for whatever it is. If you are sure you haven't done anything to update your main ver than chances are your mainver is not the problem.
I am just guessing but this is what I am imagining could be solutions.
- Use 'fastboot oem lock' from the hboot prompt when in fastboot usb mode (ie your usb cable is plugged in.
- Make sure you are using the .exe version of the RUU. If you are not using the .exe version then that definitely could be the problem, if you are using the .exe version then perhaps the file got corrupted when you downloaded it. Try deleting and redownloading.
- You have said that you are running the stock recovery which sounds correct. But make sure you aren't using the stock recovery from one of your own backups use the one that is provided in the thread from my link above.
... In conclusion you shouldn't need ADB if your main version is the stock mainver. Flash the stock recovery first of all, then use the command 'fastboot oem lock' it will tell you it is locked it will reboot the phone (I think it even gives you an error in the dos prompt.) But then when it reboots it reboots to hboot and will say relocked at the top in the bright purple. Then be sure to run the RUU version .exe. If the RUU you have still isn't working download another (this is the one that worked for me: http://www.scottsroms.com/downloads.php?do=file&id=37)
Sorry wish I could be more helpful but I don't have relevant experience for what is happening for you but I do know what worked for me and I do believe it will work for you.
Good luck!
I doubt seriously that its my mainver. I'm wondering if it had something to do with that,weird security thing I had showing up in my fastboot. I will try it again maybe tomorrow night or something. Thank for your help
THANKS
I had to do the main ver fix and everything, great guide made everything super easy
Hey folks..so I want to start flashing kernels and yes I know I probably should have gone s-off way sooner but I want to do it now. I've been rooting and romming my phones for a while but this whole s-off procedure continued to scare the crap out of me. But..I don't want to limit my choices when it comes to roms and kernels so I guess I'll do it anyway.
However, I am currently running RUU 4.03.605.2 with Vigor360 1.1 s modified kernel.
Can I still go s-off even though I am now running the global leak (or is it now impossible) and if so, can someone point me in the right direction?
Thank you kind gents n ladies!
I've heard of several people being successful on 4.03.605.2 with the 3.14.605.5 ControlBear version.
Only other advice I can offer is don't give up, try different wires if you're having trouble, and pay attention to the troubleshooting page if you decide you want back out and try again later. I've S-OFF'ed three Rezounds. The first took 3 days, the second 2 minutes, and the third 30 minutes.
dplane said:
Hey folks..so I want to start flashing kernels and yes I know I probably should have gone s-off way sooner but I want to do it now. I've been rooting and romming my phones for a while but this whole s-off procedure continued to scare the crap out of me. But..I don't want to limit my choices when it comes to roms and kernels so I guess I'll do it anyway.
However, I am currently running RUU 4.03.605.2 with Vigor360 1.1 s modified kernel.
Can I still go s-off even though I am now running the global leak (or is it now impossible) and if so, can someone point me in the right direction?
Thank you kind gents n ladies!
Click to expand...
Click to collapse
i did s-off with viper's rom and the .5. i was on global too, don't let it scare you or you will not get it. i couldn't get the timing for the life of me. first two hours was a hassle, then i had to get my other battery(thought i bricked my phone) then i relized that they had a metrnome with the correct timing and it worked the first time. but use a different memory card. all of these things can be found under the s-off instructions.:good:
its really easy man you can do it. i reccemend using speaker wire as its more pliable than a paperclip.. if you need help i can walk you thru it on gtalk. just pm me for me gtalk. otherwise. goodluck and yes the 3.14.605.5 ControlBear version is the correct one just lock your bootloader, run the full ruu agan( 4.03.605.2), flash amonRA, then flash this in recovery (https://docs.google.com/file/d/0B0ZJtM40GdJ0MEpGeG1ZWi0yNDA/edit) to gain root on stock global, download root checker from the app store to be sure you got root before you begin. then boot phone and check usb debugging, connect your phone to the comp(within the stock rom), start control bear.. make sure to back up EVERYTHING as it could all get wiped. (internal sd, external sd, and your nandroid if you so choose) i reccemend using a spare sd card if you have one.. ive only done my phone but it took me all of 2 trys.. i got weird errors a couple times (other than "error: still sober" got that once) if you do just run control bear again
Thanks for the responses and moral support folks!
Collin, I may have to hit you up for that assistance soon, I'd rather be safe then sorry so I might feel better if I have someone to "hold my hand"
May not get around to it til Sat afternoon or Sunday though.
famouscollin said:
its really easy man you can do it. i reccemend using speaker wire as its more pliable than a paperclip.. if you need help i can walk you thru it on gtalk. just pm me for me gtalk. otherwise. goodluck and yes the 3.14.605.5 ControlBear version is the correct one just lock your bootloader, run the full ruu agan( 4.03.605.2), flash amonRA, then flash this in recovery (https://docs.google.com/file/d/0B0ZJtM40GdJ0MEpGeG1ZWi0yNDA/edit) to gain root on stock global, download root checker from the app store to be sure you got root before you begin. then boot phone and check usb debugging, connect your phone to the comp(within the stock rom), start control bear.. make sure to back up EVERYTHING as it could all get wiped. (internal sd, external sd, and your nandroid if you so choose) i reccemend using a spare sd card if you have one.. ive only done my phone but it took me all of 2 trys.. i got weird errors a couple times (other than "error: still sober" got that once) if you do just run control bear again
Click to expand...
Click to collapse
I'm working with the same situation as the OP. You posted a link to a second recovery to flash after Amon Ra, I've tried that link and it forces me to request access. Which recovery is it and is there another link or are you able to give me access to that one?
Hey guys.
I am a complete newb with most this stuff.
I am not sure how I look at RUU I have. I will say that my phone was pretty much stock through the official ICS release.
Currently I have CM9 flashed as my rom.
Is there anyway I can S-OFF my phone?
Sax1031 said:
Hey guys.
I am a complete newb with most this stuff.
I am not sure how I look at RUU I have. I will say that my phone was pretty much stock through the official ICS release.
Currently I have CM9 flashed as my rom.
Is there anyway I can S-OFF my phone?
Click to expand...
Click to collapse
If you haven't already, I would say start by checking out unlimited.io They have all the basic details about how to achieve S-OFF. Without knowing more specifics about your setup it would be hard someone to give a more specific answer.
neowisdom1031 said:
If you haven't already, I would say start by checking out unlimited.io They have all the basic details about how to achieve S-OFF. Without knowing more specifics about your setup it would be hard someone to give a more specific answer.
Click to expand...
Click to collapse
Yea I have went there.
I have the program downloaded. I am on Gray's CM9 rom.
Followed all the instructions. When the program runs it goes like this:
Starting up....
Connecting to device....
Searching device.....
Found device......
Backing up.....
Permission denied.....
Transferring backups....
Secondary backup FAILED!!
Press ENTER to exit.
like I said my phone was stock till the official ICS update released. After that I unlocked the boot loader and just recently flashed my first rom, through Amon Ra.
If I could kindly ask you what info you need, and possibly how to access the info, to help me out. Do I need to flash a stock rom back?
---------- Post added at 08:27 PM ---------- Previous post was at 07:29 PM ----------
I hope to god my hboot was stock. As I am running a previous RUU.
Hopefully once I do this, I will be able to S-OFF.
Sax1031 said:
Yea I have went there.
I have the program downloaded. I am on Gray's CM9 rom.
Followed all the instructions. When the program runs it goes like this:
Starting up....
Connecting to device....
Searching device.....
Found device......
Backing up.....
Permission denied.....
Transferring backups....
Secondary backup FAILED!!
Press ENTER to exit.
like I said my phone was stock till the official ICS update released. After that I unlocked the boot loader and just recently flashed my first rom, through Amon Ra.
If I could kindly ask you what info you need, and possibly how to access the info, to help me out. Do I need to flash a stock rom back?
---------- Post added at 08:27 PM ---------- Previous post was at 07:29 PM ----------
I hope to god my hboot was stock. As I am running a previous RUU.
Hopefully once I do this, I will be able to S-OFF.
Click to expand...
Click to collapse
If you're able to flash back to stock that would be the best place to start for S-OFF
neowisdom1031 said:
If you're able to flash back to stock that would be the best place to start for S-OFF
Click to expand...
Click to collapse
I flashed back to the first ICS RUU.
I think I know why it said permission denied. Because I didn't have actual root access.
At the point of trying the wire trick.
Edit: Achieved S-OFF. Thanks so much guys. Going from 3 days ago of flashing my first rom. To having to relock the device, run the first ICS Ruu, then doing the wire trick. Hell of a learning curve on these things. Thanks everyone for all the help.
Just a quick update. I was able to achieve S-Off while using this specific RUU. It took a few time flashing the RUU and a rooted rom to finally get it but it is possible with this RUU.
neowisdom1031 said:
Just a quick update. I was able to achieve S-Off while using this specific RUU. It took a few time flashing the RUU and a rooted rom to finally get it but it is possible with this RUU.
Click to expand...
Click to collapse
Fwiw I also was able to go s-off using this ruu and flashing supersu from a temporary amon ra. Not as tough as it thought.
Sent from my ADR6425LVW using xda app-developers app
.
Did you put the Juopunutbear executable and files into the same folder
that Android fastboot, adb, and other files are located?
michaelbsheldon said:
Did you put the Juopunutbear executable and files into the same folder
that Android fastboot, adb, and other files are located?
Click to expand...
Click to collapse
It shouldn't matter. ControlBear has its own versions of everything it needs.
Sent from my HTC Rezound using Tapatalk 2
So this is what i've done and its failing with the error: "Secondary backup FAILED!!"
-I reset everything by using the RUU 4.03.605.2.
-I then set the debugging mode, unlocked the bootloader
-Put AmonRa3.15 as my recovery
-Flashed the CWM SuperSU.
-Confirmed root access by using TitaniumBackup.
-Started the ControlBearRelease_vigor_ICS_3.14.605.5 for the ICS leak process.
-Then I get the fun error Secondary backup FAILED!!.
I'm using the latest version of JuopunutBear 0.4. Help?
-------------update---------------
So I re-flashed the full RUU and went through all the steps and still same outcome. "Secondary backup Failed!". I read that only version .1 may work if this error occurs?
=-\
Izeltokatl said:
So this is what i've done and its failing with the error: "Secondary backup FAILED!!"
-I reset everything by using the RUU 4.03.605.2.
-I then set the debugging mode, unlocked the bootloader
-Put AmonRa3.15 as my recovery
-Flashed the CWM SuperSU.
-Confirmed root access by using TitaniumBackup.
-Started the ControlBearRelease_vigor_ICS_3.14.605.5 for the ICS leak process.
-Then I get the fun error Secondary backup FAILED!!.
I'm using the latest version of JuopunutBear 0.4. Help?
-------------update---------------
So I re-flashed the full RUU and went through all the steps and still same outcome. "Secondary backup Failed!". I read that only version .1 may work if this error occurs?
=-\
Click to expand...
Click to collapse
i s-offed with the global ruu and and this version of control bear https://docs.google.com/file/d/0B0ZJtM40GdJ0SmVBbm40anJpRTg/edit ia got a few wierd errors but just started it up again and all went well..also make sure you have htc sync uninstalled from your computer
famouscollin said:
i s-offed with the global ruu and and this version of control bear https://docs.google.com/file/d/0B0ZJtM40GdJ0SmVBbm40anJpRTg/edit ia got a few wierd errors but just started it up again and all went well..also make sure you have htc sync uninstalled from your computer
Click to expand...
Click to collapse
Ya that's the exact same version I have, not really sure what to do? I re-did everything back to RUU again to no avail.
Izeltokatl said:
Ya that's the exact same version I have, not really sure what to do? I re-did everything back to RUU again to no avail.
Click to expand...
Click to collapse
you can try backing up your sd cards and partition them before you start the control bear process, and your sure you have root access correct? via rootchecker, tatanium backup or somethin gand usb degugging checked? if your still having issues look for apophis' thread named "so you need assistance, WE ARE HERE TO HELP" post in that thread im sure he can help you walk thru it..
When I bought my rezound used it had a constant boot loop issue. That's why I got it fairly cheap. I immediayly ran the global ruu hoping it would boot. It still boot looped. I was able to unlock, flash recovery and install newts xxx. I have tried to boot other romsand they give me issues too. Is there any way I can s off in my current configuration because I am pretty confident another ruu from my sd card just won't boot. Has anyone had success being on a custom Rom w global firmware hboot 2.27?
Here's my situation. Got this new phone yesterday. I am (was) bootloader unlocked, s-on with htcdev method. Also am (was) using twrp for recovery. Then went looking for some roms... found one, moved it to the phone, wipe, blah, blah, done this before plenty on my old evo shift. Well, there was some problem, rom couldn't be installed, which is no problem for people who do regular nand backups. That was not me. So... stuck at htc screen.
Bottom line, after many hours of different ideas and methods, I've relocked the bootloader, downloaded an ruu, and I'm stuck. In hindsight I sort of backed myself into a corner, because though I supposedly needed to relock to run an ruu, now I can't get at twrp recovery. So I need help running the ruu from fastboot. In my searches, this seems possible, but it's not working for me. The phone is recognized, because when I enter into command "fastboot find devices" or whatever that was, a phone shows up. The .exe itself just won't open though. Tried running as administrator, tried compatibility mode, tried running it from the command line, each time it will give me the blue circley thing for about 5 or 10 seconds and then just do nothing.
I'm just out of ideas, feeling like I'm stuck here.
Remember: currently my screen reads TAMPERED RELOCKED Security Warning I'm in fastboot usb mode. Oh, and I tried to find the ruu to match my Hboot, but it currently shows 1.15.0000, and there is of course no ruu with that code, so I downloaded the newest one (2 point something)
Any help is appreciated
admsteff said:
Here's my situation. Got this new phone yesterday. I am (was) bootloader unlocked, s-on with htcdev method. Also am (was) using twrp for recovery. Then went looking for some roms... found one, moved it to the phone, wipe, blah, blah, done this before plenty on my old evo shift. Well, there was some problem, rom couldn't be installed, which is no problem for people who do regular nand backups. That was not me. So... stuck at htc screen.
Bottom line, after many hours of different ideas and methods, I've relocked the bootloader, downloaded an ruu, and I'm stuck. In hindsight I sort of backed myself into a corner, because though I supposedly needed to relock to run an ruu, now I can't get at twrp recovery. So I need help running the ruu from fastboot. In my searches, this seems possible, but it's not working for me. The phone is recognized, because when I enter into command "fastboot find devices" or whatever that was, a phone shows up. The .exe itself just won't open though. Tried running as administrator, tried compatibility mode, tried running it from the command line, each time it will give me the blue circley thing for about 5 or 10 seconds and then just do nothing.
I'm just out of ideas, feeling like I'm stuck here.
Remember: currently my screen reads TAMPERED RELOCKED Security Warning I'm in fastboot usb mode. Oh, and I tried to find the ruu to match my Hboot, but it currently shows 1.15.0000, and there is of course no ruu with that code, so I downloaded the newest one (2 point something)
Any help is appreciated
Click to expand...
Click to collapse
You can get the RUU here
This will help you get twrp and SuperSU back
It's really just an incompatible ruu? I'm about halfway through downloading the 1.22 version already, I thought I would try. I'll give it a shot, but wouldn't it give an error or something instead of just not responding on my pc?
admsteff said:
It's really just an incompatible ruu? I'm about halfway through downloading the 1.22 version already, I thought I would try. I'll give it a shot, but wouldn't it give an error or something instead of just not responding on my pc?
Click to expand...
Click to collapse
To be honest I have never flashed an RUU but I would think if you flashed the wrong one it could potentially brick your phone.
Thanks, these ruu files are so damn big, it's gonna be a few minutes. We'll see how it goes.
admsteff said:
Thanks, these ruu files are so damn big, it's gonna be a few minutes. We'll see how it goes.
Click to expand...
Click to collapse
You should try uploading them haha good luck.
Wait a minute, I noticed that the link you gave me is for a .zip file, while the one I'm downloading is for a .exe file? Isn't it supposed to be a self-installing program from windows? Do I need to be entering like a fastboot flash command for a zip instead because my phone is in fastboot and not fully booted? I can't believe I forgot the nand backup, this is like a whole wasted day of my life now...
admsteff said:
Wait a minute, I noticed that the link you gave me is for a .zip file, while the one I'm downloading is for a .exe file? Isn't it supposed to be a self-installing program from windows? Do I need to be entering like a fastboot flash command for a zip instead because my phone is in fastboot and not fully booted? I can't believe I forgot the nand backup, this is like a whole wasted day of my life now...
Click to expand...
Click to collapse
Like I said I have never ran an RUU so I'm not sure how it works you could PM om4 or read Don't Panic in the Q&A section
Yeah, problem is the same with the 1.22 ruu. It just wont execcute the program from my pc. Does anybody else have any ideas?
You only had to flash the kernel or bootimg. Seperately since your s-on...look for om4 guide " don't panic"...it should answer all of your questions...as far as the ruu make sure you're on the bootloader fastboot screen when you run it.
Sent from my EVO using xda premium
---------- Post added at 02:40 PM ---------- Previous post was at 02:37 PM ----------
http://forum.xda-developers.com/showthread.php?p=31102864
mrlakadaddy said:
You only had to flash the kernel or bootimg. Seperately since your s-on...look for om4 guide " don't panic"...it should answer all of your questions...as far as the ruu make sure you're on the bootloader fastboot screen when you run it.
Sent from my EVO using xda premium
---------- Post added at 02:40 PM ---------- Previous post was at 02:37 PM ----------
http://forum.xda-developers.com/showthread.php?p=31102864
Click to expand...
Click to collapse
Yes, I realize I dug myself into a hole by relocking. I just didn't want to learn how to put a new img on my phone (of course it was wiped, with a bad rom flashed) without having the thing mounted as a media device in the gui method. I'm sure it would have been quite easy, and that's kind of how the whole thing went, I wasn't scared enough and I just kept doing what I thought was the "easiest" way to get the phone back, and just was a dumbass overall. I read the "don't panic" guide. Maybe I missed something, but I don't think it would have got me out of the specific problem I made, once I was already in it. And I was certainly on fastboot usb when trying to run the ruu, and I had it in the right folder with fastboot.exe, etc.
Anyway, I never got it to work, but I ended up just returning the device to the retailer, and no questions were asked. It was cheating, I know. It could have been done, I was far from bricked, but when the phone is 1.5 days old and I can return it to a person who has no idea why my phone is "stuck", it was just too easy.
Thanks to everyone who tried to help
Ok, I give up. I've tried everything I can think of, but I can't get 4G to stick on, and trying to run the 3.06 RUU gives me error 170.
Here's what happened. Yesterday I flashed Kickdroid 2.0 with the CDMA patch from: http://forum.xda-developers.com/showthread.php?t=2634126
- Everything seemed to install fine, and initially 4G was up. But within about a minute 4G disconnected and I no longer had any mobile data.
- So then I did a full complete wipe via TWRP - doing the factory reset, then using the advanced wipe on everything except internal storage - then restored my backup of BadSeed's Tranquil rom. It came up fine initially but then within about a minute 4G disconnected and I was put back at 3G.
- Re-wiped everything same as before, then flashed the Tranquil Rom from scratch. - Same problem. 4G connects initially then drops to 3G.
- Updated TWRP to the beta .6 version as suggested by the Kickdroid dev and re-flashed and did all those same steps again and still having same problem
- At one point last night I left the phone alone and after a long time with the kickdroid Rom re-flashed it asked me which carrier I had. I chose Verizon and then 4G stuck on for a while. Then, it lost it's connection again to 4G. This Rom never gave me any 'Service'. The lockscreen always said 'no service'
- This morning, I flashed the latest Viper and it too initially gives me 4G then about a minute later that drops and I'm stuck on 3G.
- I thought maybe it was my SIM card, so I put it in my rezound and it works just fine in that phone.
- I've been trying to RUU using the 3.06.605.4 RUU from: http://forum.xda-developers.com/showthread.php?t=2612740 but I keep getting error 170 saying that the device wasn't found and to plug in my usb cable.
I suspect that there is something in the CDMA patch that has done this. I say that in hopes to help narrow the problem down not to blame anyone, as I do accept the responsibility to what I have flashed on my phone, so please don't take it that way. I don't know what could remain after wiping and re-flashing but it seems as thought something has.
Anyhoo, I'm getting a little desperate at this point and hoping someone can help me out. Much appreciated...
Try flashing the recovery flashable radio?
Something could have borked the radio partition.
Sent from my DNA using my mind.
Uzephi said:
Try flashing the recovery flashable radio?
Something could have borked the radio partition.
Sent from my DNA using my mind.
Click to expand...
Click to collapse
Lol, of course the one thing I forgot to mention that I did. I flashed the radio from .torrented's thread as well.
I think at this point I'd like to just RUU it anyway. Could it be that my bootloader is still unlocked and I have TWPR as my recovery?
Thanks a lot guys...
badogg said:
Ok, I give up. I've tried everything I can think of, but I can't get 4G to stick on, and trying to run the 3.06 RUU gives me error 170.
Here's what happened. Yesterday I flashed Kickdroid 2.0 with the CDMA patch from: http://forum.xda-developers.com/showthread.php?t=2634126
- Everything seemed to install fine, and initially 4G was up. But within about a minute 4G disconnected and I no longer had any mobile data.
- So then I did a full complete wipe via TWRP - doing the factory reset, then using the advanced wipe on everything except internal storage - then restored my backup of BadSeed's Tranquil rom. It came up fine initially but then within about a minute 4G disconnected and I was put back at 3G.
- Re-wiped everything same as before, then flashed the Tranquil Rom from scratch. - Same problem. 4G connects initially then drops to 3G.
- Updated TWRP to the beta .6 version as suggested by the Kickdroid dev and re-flashed and did all those same steps again and still having same problem
- At one point last night I left the phone alone and after a long time with the kickdroid Rom re-flashed it asked me which carrier I had. I chose Verizon and then 4G stuck on for a while. Then, it lost it's connection again to 4G. This Rom never gave me any 'Service'. The lockscreen always said 'no service'
- This morning, I flashed the latest Viper and it too initially gives me 4G then about a minute later that drops and I'm stuck on 3G.
- I thought maybe it was my SIM card, so I put it in my rezound and it works just fine in that phone.
- I've been trying to RUU using the 3.06.605.4 RUU from: http://forum.xda-developers.com/showthread.php?t=2612740 but I keep getting error 170 saying that the device wasn't found and to plug in my usb cable.
I suspect that there is something in the CDMA patch that has done this. I say that in hopes to help narrow the problem down not to blame anyone, as I do accept the responsibility to what I have flashed on my phone, so please don't take it that way. I don't know what could remain after wiping and re-flashing but it seems as thought something has.
Anyhoo, I'm getting a little desperate at this point and hoping someone can help me out. Much appreciated...
Click to expand...
Click to collapse
Did you update HTC driver? then trying to RUU from bootloader, Fastboot usb, with the latest Hboot updated* (1.54.0000)= 3.06.605.4 version.
---------- Post added at 01:34 PM ---------- Previous post was at 01:23 PM ----------
badogg said:
Lol, of course the one thing I forgot to mention that I did. I flashed the radio from .torrented's thread as well.
I think at this point I'd like to just RUU it anyway. Could it be that my bootloader is still unlocked and I have TWPR as my recovery?
Thanks a lot guys...
Click to expand...
Click to collapse
Bootloader unlocked matter to RUU , TWRP nope.
finanandroid said:
Did you update HTC driver? then trying to RUU from bootloader, Fastboot usb, with the latest Hboot updated* (1.54.0000)= 3.06.605.4 version.
---------- Post added at 01:34 PM ---------- Previous post was at 01:23 PM ----------
Bootloader unlocked matter to RUU , TWRP nope.
Click to expand...
Click to collapse
I would expect a problem later on if it were the bootloader being locked still, not int he beginning and then saying that the device isn't found. Or am I totally wrong and should just re-lock the bootloader and try again?
badogg said:
I would expect a problem later on if it were the bootloader being locked still, not int he beginning and then saying that the device isn't found. Or am I totally wrong and should just re-lock the bootloader and try again?
Click to expand...
Click to collapse
Well you mention error 170, usually its HTC Driver outdated, thats the reason that I suggest Driver update.
thought first have a working ADB/fastboot to see your phone. usb 2
you need to lock the Bootloader in order to run Ruu 3.06.exe (no problem because after RUU is done, Rumrunner unlock and S-Off Thanks to beaups
you need to update the Stock Hboot version to 3.06. thanks to Torrented
Here the link updated thanks to Phaded http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
finanandroid said:
Well you mention error 170, usually its HTC Driver outdated, thats the reason that I suggest Driver update.
thought first have a working ADB/fastboot to see your phone. usb 2
you need to lock the Bootloader in order to run Ruu 3.06.exe (no problem because after RUU is done, Rumrunner unlock and S-Off
you need to update the Stock Hboot version to 3.06. thanks to Torrented
Here the link updated thanks to Phaded http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
Click to expand...
Click to collapse
I tried the updated drivers earlier and still get the error 170. I'm wondering if there is just something wonky with my work computer that isn't working right. I'll try locking bootloader and running RUU from a laptop and see what happens. Thanks for the assist! :highfive:
badogg said:
I tried the updated drivers earlier and still get the error 170. I'm wondering if there is just something wonky with my work computer that isn't working right. I'll try locking bootloader and running RUU from a laptop and see what happens. Thanks for the assist! :highfive:
Click to expand...
Click to collapse
a pleasure
Any other android devices hooked up to that PC? I had 170 error when having both Rezound and DNA plugged in. The program may be trying to look at the other device port instead of the DNA port.
Try with locked boot loader and stock recovery. After I got rid of error 170 I got an error in the 150's (not the one mentioned in the ruu thread). It was because of custom splash image and custom recovery.
Sent from my DNA using my mind.
Uzephi said:
Any other android devices hooked up to that PC? I had 170 error when having both Rezound and DNA plugged in. The program may be trying to look at the other device port instead of the DNA port.
Try with locked boot loader and stock recovery. After I got rid of error 170 I got an error in the 150's (not the one mentioned in the ruu thread). It was because of custom splash image and custom recovery.
Sent from my DNA using my mind.
Click to expand...
Click to collapse
Interesting, I don't have anything connected, but I'm sure I have drivers loaded for my nexus 7
Which drivers for HTC are you using? The ones from HTC sync or the ones from pdanet? I found the pdanet ones work better for everything but HTC sync (which, who honestly uses? Lol)
Sent from my DNA using my mind.
Well, I let htcsync update the usb drivers and now the RUU is updating the image now.
Ok, this persisted through the RUU. Rom booted up, got 4G initially, then went to 3G.
badogg said:
Ok, this persisted through the RUU. Rom booted up, got 4G initially, then went to 3G.
Click to expand...
Click to collapse
after Ruu you most do a factory reset* from stock recovery
All that is usually needed is to restore the NV partitions on the device.
To do this, flash a stock rom and stock recovery.
Perform a factory reset in stock recovery.
Your radio should then function normally again.
No need to RUU or any of that, just a stock rooted rom and stock recovery are sufficient.
The key factor is the factory reset in stock recovery.
So if you did the RUU already, and did not do the factory reset in stock recovery, then that's why you still have an issue.
finanandroid said:
after Ruu you most do a factory reset* from stock recovery
Click to expand...
Click to collapse
omg, duh!! I knew that, just forgot to do it.
That seems to have fixed it. +150,000 internets to you!!
badogg said:
omg, duh!! I knew that, just forgot to do it.
That seems to have fixed it. +150,000 internets to you!!
Click to expand...
Click to collapse
glad :good: you got it !
@santod040 which stock rom do I need to flash and what is stock recovery? Do I have to do this with adb comands or use twarp like normal flash so I can get my radio working correctly again and 4g back? Any one that can point me to what I need to do here is greatly appreciated. Thank you!
Sent from my HTC6435LVW using Tapatalk
Sutko82 said:
@santod040 which stock rom do I need to flash and what is stock recovery? Do I have to do this with adb comands or use twarp like normal flash so I can get my radio working correctly again and 4g back? Any one that can point me to what I need to do here is greatly appreciated. Thank you!
Sent from my HTC6435LVW using Tapatalk
Click to expand...
Click to collapse
My full odex stock Rom in the dev section is sufficient.
If there isn't a stock recovery posted anywhere I'll locate one for you.
Then you flash the Rom in your current recovery.
After you boot, reboot to hboot.
Then fastboot flash recovery nameoffile.img.
Then either factory reset from Recovery or from the roms settings option.
Sent from my HTC6500LVW using Tapatalk
Pls locate stock recovery as I am not sure which one to use. I am downloading your odexed stock rom as we speak. I appreciate this very much! @santod040
Sent from my HTC6435LVW using Tapatalk
---------- Post added at 11:48 PM ---------- Previous post was at 11:43 PM ----------
After boot type in command prompt reboot to hboot or can I just type adb devices and then flash recovery
Sent from my HTC6435LVW using Tapatalk