Bricked? TV Box - Android Stick & Console AllWinner based Computers

Hi,
I bought an Andorid media player. It isin't very clear who made it. It has a kingzer case but cannot find the case or any info on it on their website. It was made rooted I wanted to unroot it so I could run media apps properly. I then tried to install CWM spesifcally "CWM Recovery 6.0.1.2 for Allwinner A10 LY-F1/TREQ Tablets" thread on xda-developers. Its an Allwinner A10. So I got it to install but when I boot up my media box now I get CWM screen 4 times on my tv and its all pink saying
E: Can't mount /sdcard/
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
The buttons on the front of my media box only move the selection up and down cannot actually "select" anything. I have tried ADB it appears as "20080411 recovery" however when I try to fastboot it and do fastboot devices nothing appears. Iv tried both windows 7 and Linux Mint. I have no idea what to do. Id rather not just throw it away as scrap cost me £100. Below are the specs I got from the device before hand.
Android version 4.0.4
Release Codename: REL
API LEVEL 15
CPU ABI armeabi-v7a
Manufacturer unknown
Bootloader unknown
CPU ABl2 armeabi
Hardware: sun4i
Radio unknown
Board crane
Brand softwinners
Device: apollo-zhpubhost
Display: apollo_zhpubhos-eng 4.0.4
Fingerprint softwiners/apollo_zhpubhos-eng 4.0.4/IMM76D/20121210:eng/test-keys
Host androidck-desktop
ID IMM76D
Model zhpubhost-A10-APOLLO
Product apollo_zhpubhost
Tags: test-keys
Type: eng
User androidck
Also not sure if this helps but by typing adb shell ps
PID USER VSZ STAT COMMAND
1 root 320 S /init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW [kworker/u:0]
6 root 0 SW [rcu_kthread]
7 root 0 SW< [khelper]
8 root 0 SW< [netns]
9 root 0 SW< [suspend]
10 root 0 SW [sync_supers]
11 root 0 SW [bdi-default]
12 root 0 SW< [kintegrityd]
13 root 0 SW< [kblockd]
14 root 0 SW [khubd]
15 root 0 SW< [cpufreq_uevent]
16 root 0 SW< [cfg80211]
17 root 0 SW [kworker/0:1]
18 root 0 SW< [rpciod]
19 root 0 SW [kswapd0]
20 root 0 SWN [ksmd]
21 root 0 SW [fsnotify_mark]
22 root 0 SW< [nfsiod]
23 root 0 SW< [crypto]
37 root 0 SW [nandd]
38 root 0 SW [nfmtd]
39 root 0 SW [kworker/u:1]
46 root 0 SW< [f_mtp]
47 root 0 SW [file-storage]
48 root 0 SW [kworker/0:2]
49 root 0 SW< [kpsmoused]
50 root 0 DW [kinteractiveup]
51 root 0 SW< [kfantasy]
52 root 0 SW< [binder]
53 root 0 SW< [codec_resume]
54 root 0 SW< [krfcommd]
55 root 0 SW [hdmi proc]
56 root 312 S /sbin/ueventd
58 root 16536 S /sbin/recovery
64 root 4480 S /sbin/adbd recovery
104 root 1876 S /sbin/sh -c ps
106 root 1880 R ps
I got that. Any help wold be really appreciated. Thanks

Perhaps others can, but from what you have posted, I have no idea which box you have.
A picture of the device, and better yet, a picture of the circuit board may help.
Then perhaps someone on these forums can identify it and point you to a ROM (Firmware) that you can load.
Lots of these things are sold under different names, so installing a new firmware may "re-brand" it, but at least you'll (hopefully) have a working device.

Linuxslate said:
Perhaps others can, but from what you have posted, I have no idea which box you have.
A picture of the device, and better yet, a picture of the circuit board may help.
Then perhaps someone on these forums can identify it and point you to a ROM (Firmware) that you can load.
Lots of these things are sold under different names, so installing a new firmware may "re-brand" it, but at least you'll (hopefully) have a working device.
Click to expand...
Click to collapse
attached the picture of the motherboard and here is a link to the box on ebay - ebay - co uk - /itm/3D-Blu-Ray-3-5-HDD-MKV-Media-Player-MINI-PC-Android-4-0-TV-Box-DDR3-1GB-HDMI1-4-/170962126682?pt=UK_WSJL_Wholesale_GL&hash=item27ce23075a
not allowed to post outside links but its ebay its safe
If you could help me i would be grateful

Any help? I really don't know what to do. I don't want to throw away £100

Use PhoenixCard or Livesuit to reinstall stock firmware

diogo.c said:
Use PhoenixCard or Livesuit to reinstall stock firmware
Click to expand...
Click to collapse
Hi , i have same problems but i dont have a stock firmware whit itek itad002
some news or help me please
many thanks
Paolo

Related

Who has unlocked Hero locked Orange (UK)?

Hello,
some of us who have bought a Hero locked to Orange can't seem to get it unlocked (http://forum.xda-developers.com/showthread.php?t=555424).
For those have you who have managed to successfully unlock an Hero on Orange please can you advise on your experience- did you have to do something differently? And who you used to get the code? I have used Unlock Now (www.unlock-now.com) but the code they have supplied didn't work (they refunded me).
I have never had a problem unlocking a HTC phone until now and I find it hard to believe that Orange Heros can't be unlocked.
Please help if you can.
*********************************************************
[Update 16/10/09]
I am glad this thread has been of use to people.
I thought I would add and update to the first page so people don't have to wade through the whole thread.
If you are experiencing this issue you have two choices:
1)CID unlock your Hero (http://forum.xda-developers.com/showthread.php?t=559806).
2)Use a Rebel II Sim.
OK there are three choices.
3) Use your Hero on an Orange contract for about three months then ring up Orange and ask them for a unlock code. They will charge about £20 for it and you may have to wait up to two weeks for em to send it.
C'est tout.
*********************************************************
[Update 24/10/09]
OK, after discussions and PM's on this thread I was advised to use the code I had previously bought with a different rom (when I first got my Hero tried it I was using the Orange stock rom then Modacos 2.3).
I just tested it now, took out my rebel sim put in the code and it works! I am currently using Modaco's 2.8.
Hope this helps.
I used http://hero.unlock-now.com/sim-unlock-HTC-Hero/ and the code worked for me. I did get my Hero within a few days of release. My work collegue also did the same with no problems.
What network do you use your hero on now?
hi i bought one locked to orange uk and unlocked it here
http://www.simunlock-htchero.com/buy.html
i received the code in 2 minutes and it worked, i use now Optimus in Portugal
Got my second one (for the wife) off eBay a week or two back. Poster claimed it was days old. Unlocked through htcunlock fine. Three sim seems to work better with Orange radio than the tmobile hero I purchased earlier.
Zuber
RetroFlux: I'm now on o2 after my unlock.
i'm getting the same thing with my orange locked hero, I have even tried a foreign sim as suggested. But does not seem to unlock with the correct unlock code. Is there a cable method for unlocking?
I have the same problem.
First case:
Turn on the phone with orange SIM card - everything works fine.
Turn on the phone with any other SIM card (I actually tried 3 other SIM card from 3 different providers). It asks unlock code. Enter unlock code I bought (actually any code containing 8 digits) it says "Network unlock successful." But after that it allow only emergency calls and if I try to make a call I see "Not registered in network" message. After reboot it asks unlock code again.
Second case:
If I do "restore to factory defaults" and turn it on the first time with my (no orange) SIM card, it asks unlock code I enter correct unlock code (salesman gave me one, and after that I also bought the same code in the Internet )
it hangs with phrase "Unlocking SIM card...". (Actually "turn off menu" works, I even can make an emergency call, but that is all I can get from it)
Also I noticed that in the first case there is strange line on the bottom of the screen (of the size of the notification bar).
I have tried different ROMS (original, rooted, latest, modacos) all the same. I also tried to downgrade radio firmware. I even tried all SIM cards I can obtain, the problem is obviously doesn't caused by SIM/Network incompatibility. Btw, my SIM card works OK in another HTC Hero (which was bought with my one).
I think it is problem with unlock procedure itself, not with code correctness. If wrong code entered it must say something like "wrong code", but for any 8 digit code it says "Network unlock successful". Is is the symptom! )
I do not know what to do further
I got a (UK) Orange Hero about 3 weeks ago from dial-a-phone. Unlocked it without a problem about a week later from:
http://hero.unlock-now.com/sim-unlock-HTC-Hero/
Took about 20 mins and worked 1st time. Now running with an UK O2 sim. Sorry!
As I mentioned above, while first boot with my local SIM card it hangs with "Unlocking SIM card..." message. At this time I see the following processes running.
Code:
# ps wwwwwww
PID USER VSZ STAT COMMAND
1 0 292 S /init
2 0 0 SW< [kthreadd]
3 0 0 SW< [ksoftirqd/0]
4 0 0 SW< [watchdog/0]
5 0 0 SW< [events/0]
6 0 0 SW< [khelper]
7 0 0 SW< [suspend]
8 0 0 SW< [early_suspend]
9 0 0 SW< [kblockd/0]
10 0 0 SW< [kmmcd]
11 0 0 SW< [btaddconn]
12 0 0 SW< [btdelconn]
13 0 0 SW< [kondemand/0]
14 0 0 SW< [qmi]
15 0 0 DW< [rpcrouter]
16 0 0 SW< [detection/0]
17 0 0 SW< [krpcserversd]
18 0 0 SW [pdflush]
19 0 0 SW [pdflush]
20 0 0 SW< [kswapd0]
21 0 0 SW< [aio/0]
22 0 0 SW< [panel_on/0]
23 0 0 SW< [cabc_work_q]
24 0 0 SW< [mtdblockd]
25 0 0 SW< [kadspd]
26 0 0 SW< [USB mass_storag]
27 0 0 SW< [synaptics_wq]
29 0 0 SW< [kstriped]
30 0 0 SW< [krfcommd]
31 0 0 SW< [mmcqd]
33 0 3328 S /sbin/adbd
50 1000 808 S /system/bin/servicemanager
51 0 852 S /system/bin/vold
52 0 668 S /system/bin/debuggerd
53 1001 11064 S /system/bin/rild
54 0 73504 S zygote /bin/app_process -Xzygote /system/bin --zygote --start-system-server
55 1013 30172 S /system/bin/mediaserver
57 1002 1180 S /system/bin/dbus-daemon --system --nofork
59 0 800 S /system/bin/installd
61 1008 1196 S /system/bin/akm8973
73 0 0 DW< [snd_rpc]
77 1000 173m S system_server
140 9998 159m S android.process.acore
142 1001 132m S com.android.phone
144 1000 96660 S com.htc.android.htcsetupwizard
166 10002 111m S com.google.process.gapps
179 0 0 DW< [ksdiorqd]
180 0 0 SW< [tiwlan_wifi_wq]
186 10004 96600 S com.htc.android.worldclock
193 10005 101m S com.htc.provider
207 1010 3160 S /system/bin/wpa_supplicant -Dtiwlan0 -itiwlan0 -c/data/misc/wifi/wpa_supplicant.conf
237 10031 121m S com.htc.android.htcime
244 9999 140m S com.htc.launcher
253 10016 98640 S com.htc.android.psclient
265 10017 107m S com.android.mms
285 10019 97736 S android.process.media
296 10020 106m S com.google.android.apps.maps:FriendService
307 10022 99016 S com.esmertec.android.jbed
322 10036 97.6m S com.google.android.partnersetup
332 10042 100m S com.htc.calendar
346 1000 100m S com.android.settings
356 10029 98612 S com.htc.android.footprints
366 10013 98012 S com.android.setupwizard
430 0 740 S /system/bin/sh -
468 0 2072 R ps wwwwwww
Im having the same issue, I got a new HTC Hero on Orange today, and it wont unlock. I used Unlock-now, so I have sent them a message asking for my money back, will that suffice. Has anyone been able to get there Orange UK, branded and locked phones unlocked.
nintendolinky, what is your ROM version ? There may be a possibility you have the latest firmware build... maybe...
i'm in the same boat! bought the code but no joy. it say's unlocked but could not register my voda sim. Anyone?
I tried to contact Orange today to buy an unlock code from them directly, after been passed about I eventually got through to someone bureaucratic wench who was completely unhelpful and I ended up telling them to F off and hung up. Kind of shot myself in the foot there.
I know this doesn't help our situation but I am still looking into it.
joemax said:
nintendolinky, what is your ROM version ? There may be a possibility you have the latest firmware build... maybe...
Click to expand...
Click to collapse
So are you saying there is an issue with the new firmware? When you say firmware do you mean ROM? As I have already flashed Modacos latest ROM and my Three/Vodafone/O2 sim still won't work.
I don't have my Hero with me at the moment but will post back my firmware number later, if other people (who are having the same issue) can post theirs maybe we can find a common firmware at fault.
nintendolinky said:
I used Unlock-now, so I have sent them a message asking for my money back, will that suffice.
Click to expand...
Click to collapse
I used Unlock-Now, they did refund me after your usual basic diagnostics.
joemax said:
nintendolinky, what is your ROM version ? There may be a possibility you have the latest firmware build... maybe...
Click to expand...
Click to collapse
Ok, here are my firmware details:
Firmware version: 1.5
Baseband Version: 63.18.55.06EU_6.35.06.18
Kernel Version: 2.6.27-8dd6deee [email protected]
Build Number: 2.73.405.5 146733 CL#61267 MCR2.2c release keys
Software Version: 1.0.0.A6288
Someone out there must be able to help fix this, pros/cooks/anyone can you shed anylight on this?
I've tried oldest/newes/custom ROMs, it looks like unlocking procedure doesn't depend on ROM at all.
is there a way to unlock this via cable? what about flashing the rom?
my build number is
Build Number: 1.76.61.3 whats the difference with this and Build Number: 2.73.405.5?
Here is my info:
Firmware version: 1.5
Baseband Version: 63.18.55.06EU_6.35.06.18
Kernel Version: 2.6.27-8dd6deee [email protected]
Build Number: 2.73.405.5 146733 CL#61267 MCR2.2e release keys
Software Version: 1.0.0.A6288
My build number is different, to the one listed here.

Cannot connect to PC, internal storage unavailable, SD card damaged

Device: Arnova Gbook (ereader)
OS: Android 4.0.3
Kernel version: Linux 3.0.8
I was using my tablet at an airport and everything was fine before I shutoff my phone for the flight to take off. I turned it back on once the plane reached cruising altitude. I got an indicator that my SD card was damaged, which makes no absolutely no sense. also, my apps disappeared...
Problems are:
-When I connect to PC, tapping "Turn on USB storage" nothing happens, only the lile circle indicates that it is doing something but it does nothing...
-Settings>Storage: "Unfortunately, Settings has stopped."
next to the clock it says "Damaged SD card. SD card damaged, you may have to reformat it." There is not SD card in the slot, but it still says this.
-Cannot push an SD card into the slot: It doesnt stay there even if i push it to the maximum inside. No "click sound" either.
-Cant do anything only using the internet, internal storage is not reachable in any way thus i cant install newer rom too.
Did a factory reset (Settings>factory reset) but couldnt help, still the same... I beg you guyz for your help!
Anyone?
up
...having the Same Problem
dyingsoulwow said:
up
Click to expand...
Click to collapse
So it looks like I'm having the same problem with the same gear. I tried several cures to no avail.
But First the Tech Specs of my Arnova GBook:
Manufactor: VIMICRO
Model: ANGB
CPU: ARMv 7 rev 2 (v7l)
Memory: RAM 337, ROM 0.91, SDCard 0 MB (at the Moment more to that later)
Android: 4.0.3
BuildID: generic_vortex-userdebug 4.0.3 IML74K 1.0 test-keys
Linux Version: 3.0.8-vimicro([email protected]) (gcc Version 4.4.3)
I copied some files to the mounted exSDCard (4gb noname) when my tablet suddenly died and the only way to reanimate it was by factory resetting it.
The Problem istself seems to relate to the inability to mount a Nonformated SDCard that i can not format because it is not proberly mounted.
I have no clue how to root the tablet. I tried a set of instruction from a french website, but since i don't speak french i'm not sure if the google translator gave me the right directions.
I tried to mount it the SDCard via terminal. Format it connecting the gbook to an ubuntu box and a lot of system tools available via googles play store.
USB connection shows the drives but I'm not abel to mount or list the contents of it. In general the System is booting up and i am able to install apps from Google Play. Since i can't mount any external devices i am not abel to transfer files via other means because the gbook wants to copy them to the interna SDCard (wich is not available ).
I am looking for any possible solution. If there is an alternate Frimware i will try it.
Thanks in advance for any offered Help!
Lanman99
Still trying...
Any solution i found using Google, Bing and DuckDuckGo seems to require Root Access. Has somebody successfully rooted an Arnova GBook?
Or is there really no possibel solution for a dummy user to fix this problem. It seems to boil down that i cannot mount device mmcblk0 to sdcard because "access denied".
Did anybody face a similar problem and fixed it without root?
Tried several SDCard tools to no avail...
ES File Explorer is showing me that everthing i need is there but still, every try to mount the internal storage is leading to permission denied. I'm stating to love Android
Well if there is no root, is it possible to write a shell script to revive the internal SDCard and run that with elevated rights?
ES File manager is showing the directory entry with 0 MB. Since i am a novice in Android Systems i am just not sure if that means anything.
Maybe i'm wasting my time on a piece of chinaware but this nut i still too tempting to ignore. It's just that with my limited Linux knowlegde it seems that mounting a device and formating it afterward sounds not to troublsome or am i completely lost. After asking Google, bing and some other SEs it is not that uncommon but none of the cures i found worked for my GBook.
What am i missing?
Stil no answer from Arnova on my request for a stockrom Download. Somebody got an Idea where elsee i could find a ROM image for an Arnove GBook or does anybody know if there is an alternative Firmware available?
I was able to connect to my Device via ADB
mount is delivering the following:
rootfs on / type rootfs (ro,relatime)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /mnt/asec type tmpfs (rw,relatime,mode=755,gid=1000)
tmpfs on /mnt/obb type tmpfs (rw,relatime,mode=755,gid=1000)
ubi0_0 on /system type ubifs (ro,noatime,no_chk_data_crc,compr=lzo)
ubi1_0 on /data type ubifs (rw,nosuid,nodev,noatime,bulk_read,no_chk_data_crc,compr=lzo)
ubi2_0 on /cache type ubifs (rw,nosuid,nodev,noatime,bulk_read,no_chk_data_crc,compr=lzo)
none on /proc/bus/usb type usbfs (rw,relatime,devmode=666)
The list under /dev/block/vold has three entries:
179:0 179:1 and 7:0
Cat /proc/partitions delivers:
31 0 10240 mtdblock0
31 1 12288 mtdblock1
31 2 120832 mtdblock2
31 3 45056 mtdblock3
31 4 524288 mtdblock4
31 5 1048576 mtdblock5
31 6 262144 mtdblock6
31 7 2169856 mtdblock7
179 0 3909632 mmcblk0
179 1 3905536 mmcblk0p1
Please I am a complete Android Noob. Is there somebody able to guide me to a Point where i can start to patch all this together.
I am able to find pieces here, but i'm not getting the broad picture.
Next try...
using Root Many by Bin4ry http://forum.xda-developers.com/showthread.php?t=1886460 to get into my device I got following results:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (20.04.2013) v29 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
3) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
x) Unroot
Make a choice: 1
Checking if i should run in Normal Mode or special Sony Mode
Please connect your device with USB-Debugging enabled now
Waiting for device to shop up, if nothing happens please check if Windows ADB-dr
ivers are installed correctly!
remote object '/system/app/Backup-Restore.apk' does not exist
remote object '/system/bin/ric' does not exist
.
.
Above file not found warning ARE NOT ERRORS, it is intended to be this way!
Normal Mode enabled!
.
Pushing busybox....
2207 KB/s (1085140 bytes in 0.480s)
Pushing su binary ....
2185 KB/s (380532 bytes in 0.170s)
Pushing Superuser app
2309 KB/s (1468798 bytes in 0.621s)
Making busybox runable ...
.
Now unlock your device and confirm the restore operation.
Please look at your device and click RESTORE!
If all is successful i will tell you, if not this shell will run forever.
Running ...
Successful, going to reboot your device in 10 seconds!
Waiting for device to show up again....
After reboot the gbook is throwing "unfortunately UI has stopped" and "unfortunately settings has stopped". Nothing works until i factory reset it again (at least something i am growing really good at) and I'm back to square one.
Other means of editing files within the system via ADB are only leading to access denied or system is in read only mode.
Any other ideas?
By using Archtablet.com's method: "http://www.arctablet.com/blog/forum/firmware-development/dumping-firmware-on-arnova-g2-arnova-g3-and-other-rockchip-based-tablets/" i tried to get an Firmwareimage. They tried to Help me out but again disaster struck. Ubuntu 13.04 with usblib installed failed to even recognize the GBook. Trying it with Windows and adb i need (what a surprise) root rights.
So next question is: Is there any general way to read out a tablet firmware without rooting or is it always up to the vendor to just screw things to their Liking ?
I know i should quit this beast, but stubborn as ever i keep banging my head against the wall .
Lanman99

[Q]Keylayout Problem

Hi
I just bought a samsung bkc 1B1 bluetooth keyboard, and I'm trying to use it with my galaxy tab 2 10.1 (p5110) with Cyanogenmod 10.1.1.
My problem is that is recognized as QWERTY keyboard, which it's not. So I decide to write a custom keylayout for the keyboard. First I searched for the vendor and product id :
Code:
$ : cat /proc/bus/input/devices
I : Bus=0005 Vendor=04e8 Product=7021 Version=0001
N : Name="Broadcom Bluetooth HID"
P : Phys=
S : Sysfs=/devices/virtual/misc/uhid/input9
U : Uniq=
H : Handler=sysrq kbd event8
B : PROP=0
B : EV=2001b
B : KEY=1f 0 0 0 0 0 0 0 0 0 0 10000 0 0 0 10013 2000007 ff9f307a c9405fff febeffdf ffafffff ffffffff fffffffe
B : ABS=f00 0
B : MSC=10
B : LED=1f
I duplicated Generic.kl and rename the copy "Vendor_04e8_Product_7021.kl". I tried to change a letter, but it seems the modification has not been taken into count even after a reboot.
I also tried "Vendor_04e8_Product_7021_Version_0001.kl" and "Broadcom Bluetooth HID.kl" but none of them seems to work.as well.
Is that normal ? How can I fix it ?
Mouarf said:
I also tried "Vendor_04e8_Product_7021_Version_0001.kl" and "Broadcom Bluetooth HID.kl" but none of them seems to work.as well. Is that normal ? How can I fix it ?
Click to expand...
Click to collapse
Try using "BroadcomBluetoothHID.kl" or "Broadcom_Bluetooth_HID.kl" instead.
Any update? Did you ever get this working? I'm experiencing the same issue. logcat shows that it never touches my custom kl file and just uses the Generic.kl. I can modify that file and my changes work fine, but that's obviously not the right solution. I'm working with a Nexus 7 stock Android 4.4.2 ROM. According to the documentation, this should work!
http://source.android.com/devices/tech/input/key-layout-files.html
Thanks

[Q] Turbo X Hive IV - root, custom rom needed, help

I bought this tablet in Greece named Turbo X Hive IV, a brand from Plaisio Store! A very nice tablet but I cant find any proper information about rooting it besides a thread about the previous model. I managed to install Gmail and Google Play, as it only had slideme under the name "plaisio market".
The technical information are the following
Turbo X Hive IV, 10.1", 1280 x 800 pixels, IPS panel, Front camera 0.3 mp, back camera 5mp, android 4.2.2, CPU QuadCore-A31 Series at 1.2 GH, Internal storage 16GB, Ram - 1GB, Wifi, Bluetooth, Mini HDMI, Micro USB 2.0 Micro usb 2.0 host , microSD card slot, Li-Ion 6000 mah
Model M10A9
Firmware 3.2_2013704
Kernel 3.3.0 [email protected] #4
My Questions:
1. I dont know if the device is rooted, I want some guidance how to check it.
2. Another thing I want to know is why cant I find anywhere how to set different user accounts (not different gmail accounts under the same user account). Is it locked or hidden ?
3. Is there any other Cyanogenmod or other custom rom that works with this tablet ?
If anyone wants pictures of the tablet I ll upload some.
Thanks,
astonakis said:
I bought this tablet in Greece named Turbo X Hive IV, a brand from Plaisio Store! A very nice tablet but I cant find any proper information about rooting it besides a thread about the previous model. I managed to install Gmail and Google Play, as it only had slideme under the name "plaisio market".
The technical information are the following
Turbo X Hive IV, 10.1", 1280 x 800 pixels, IPS panel, Front camera 0.3 mp, back camera 5mp, android 4.2.2, CPU QuadCore-A31 Series at 1.2 GH, Internal storage 16GB, Ram - 1GB, Wifi, Bluetooth, Mini HDMI, Micro USB 2.0 Micro usb 2.0 host , microSD card slot, Li-Ion 6000 mah
Model M10A9
Firmware 3.2_2013704
Kernel 3.3.0 [email protected] #4
My Questions:
1. I dont know if the device is rooted, I want some guidance how to check it.
2. Another thing I want to know is why cant I find anywhere how to set different user accounts (not different gmail accounts under the same user account). Is it locked or hidden ?
3. Is there any other Cyanogenmod or other custom rom that works with this tablet ?
If anyone wants pictures of the tablet I ll upload some.
Thanks,
Click to expand...
Click to collapse
Do you have binary file Su or Superuser.apk installed? If not is not rooted!!!!
Mr.Mefisto said:
Do you have binary file Su or Superuser.apk installed? If not is not rooted!!!!
Click to expand...
Click to collapse
I got the same tablet for about 10 days now.
How did you manage to get play services work?
I only managed to get the old market work, can you give me the link to the app?
Rooting to a pure android would be great, any time ideas what rom would work?
Manufacturer seems to be Somy.
Same Problem
Has anyone found a solution on which ROM to install on the Turbo-X Hive IV?
(or Somy M10A9...)
I haven't found anything yet...
Same problem
Please if you find something, help!
Need rooting for Turbo X Hive IV (the device is not rooted).
That's what I get when I do system analysis:
Android System Report - 11 Ιαν 2014 11:43:49 π.μ.
#Created by Quick System Info version 1.8.6
Device: HT6
Model: HT6
Product: ht6_sm_m10k9
Brand: Android
Release: 4.2.2
Build: HT6S.SM.M10K9.MUL.B125.WXGA.1211.V3.02
Locale: el_GR
Linux version 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Dec 3 15:37:57 CST 2013
Basic Info
========================================================================================
* SD card storage
Total: 12,61GB, Free: 11,78GB
* A2SD storage
Information not available
* Internal storage
Total: 0,98GB, Free: 334MB
* System storage
Total: 739MB, Free: 262MB
* System cache
Total: 123MB, Free: 116MB
* Memory
Total: 0,95GB, Free: 221MB, Idle: 80,56MB
* Processor
ARMv7 Processor rev 2 (v7l) 1209MHz
* Network
fe80::2cb:43ff:fe71:4855%wlan0, 192.168.1.77, fe80::cb:43ff:fe71:4855%p2p0
Scaling CPU frequency:1209000
Processor : ARMv7 Processor rev 2 (v7l)
processor : 0
BogoMIPS : 2439.94
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 2
Hardware : MT8389
Revision : 0000
Serial : 0000000000000000
MemTotal: 993848 kB
MemFree: 82000 kB
Buffers: 2808 kB
Cached: 143540 kB
SwapCached: 0 kB
Active: 587688 kB
Inactive: 76532 kB
Active(anon): 514032 kB
Inactive(anon): 10068 kB
Active(file): 73656 kB
Inactive(file): 66464 kB
Unevictable: 1660 kB
Mlocked: 23484 kB
HighTotal: 524288 kB
HighFree: 22900 kB
LowTotal: 469560 kB
LowFree: 59100 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 20 kB
Writeback: 0 kB
AnonPages: 519584 kB
Mapped: 184632 kB
Shmem: 4976 kB
Slab: 32788 kB
SReclaimable: 10680 kB
SUnreclaim: 22108 kB
KernelStack: 8504 kB
PageTables: 14708 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 496924 kB
Committed_AS: 6148796 kB
VmallocTotal: 540672 kB
VmallocUsed: 183940 kB
VmallocChunk: 104452 kB
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/secure tmpfs rw,relatime,mode=700 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/[email protected] /system ext4 ro,noatime,noauto_da_alloc,commit=1,data=ordered 0 0
/[email protected] /data ext4 rw,nosuid,nodev,noatime,discard,noauto_da_alloc,data=ordered 0 0
/[email protected] /cache ext4 rw,nosuid,nodev,noatime,discard,noauto_da_alloc,data=ordered 0 0
/dev/block/loop0 /mnt/cd-rom iso9660 ro,relatime 0 0
/[email protected]_f /protect_f ext4 rw,nosuid,nodev,noatime,nodelalloc,noauto_da_alloc,commit=1,data=ordered 0 0
/[email protected]_s /protect_s ext4 rw,nosuid,nodev,noatime,nodelalloc,noauto_da_alloc,commit=1,data=ordered 0 0
/dev/block/vold/179:8 /storage/sdcard0 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:8 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /storage/sdcard0/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
Rooting, Install Google play & Gmail and Multiple users
After long time, testing, modding etc I finally accomplished to Full root my Android tablet Turbo X Hive IV and install Google Play store, Gmail application and Multiple users. I wrote some posts to share them with anyone needs help (I hope it will)
For Rooting Android tablet Turbo X Hive IV guide click blog.stonebug.gr/root-android-tablet-turbo-x-hive-iv-plaisio-store-android-devices/
For Installing Google Play store and Gmail application in Android tablet Turbo X Hive IV guide click blog.stonebug.gr/install-google-play-and-gmail-android-tablet-using-turbo-x-hive-iv-tablet/
For enabling the Multi User feature on Android tablet Turbo X Hive IV and share applications guide click blog.stonebug.gr/enable-multiple-users-feature-android-4-2-using-tablet-turbo-x-hive-iv/
Rooting Turbo X Hive IV
astonakis said:
After long time, testing, modding etc I finally accomplished to Full root my Android tablet Turbo X Hive IV and install Google Play store, Gmail application and Multiple users. I wrote some posts to share them with anyone needs help (I hope it will)
For Rooting Android tablet Turbo X Hive IV guide click blog.stonebug.gr/root-android-tablet-turbo-x-hive-iv-plaisio-store-android-devices/
For Installing Google Play store and Gmail application in Android tablet Turbo X Hive IV guide click blog.stonebug.gr/install-google-play-and-gmail-android-tablet-using-turbo-x-hive-iv-tablet/
For enabling the Multi User feature on Android tablet Turbo X Hive IV and share applications guide click blog.stonebug.gr/enable-multiple-users-feature-android-4-2-using-tablet-turbo-x-hive-iv/
Click to expand...
Click to collapse
Sorry man, doesn't work...
johntziallas said:
Sorry man, doesn't work...
Click to expand...
Click to collapse
Which one did nt' work for you?
Rooting?
GPlay & Gmail ?
Multi user?
Did you follow the steps one by one ?
Do you have the 3G Hive IV ?
Tried it with 2 different Turbo X Hive IV (not 3G) tablets and it worked fine!
astonakis said:
Which one did nt' work for you?
Rooting?
GPlay & Gmail ?
Multi user?
Did you follow the steps one by one ?
Do you have the 3G Hive IV ?
Tried it with 2 different Turbo X Hive IV (not 3G) tablets and it worked fine!
Click to expand...
Click to collapse
Yes I have the 3G Hive IV
The rooting didn't work...
Any ideas?
---------- Post added at 03:14 AM ---------- Previous post was at 02:29 AM ----------
astonakis said:
Which one did nt' work for you?
Rooting?
GPlay & Gmail ?
Multi user?
Did you follow the steps one by one ?
Do you have the 3G Hive IV ?
Tried it with 2 different Turbo X Hive IV (not 3G) tablets and it worked fine!
Click to expand...
Click to collapse
When I try to run superSU I get a message saying 《There is no SU binary installed And SU cannot install it. This is a problem!》
Download Framaroot, install, run and select the first option. Reboot, run again and select the second option. Reboot and the tablet is rooted.
Visit http://forum.xda-developers.com/showthread.php?t=1893410&page=16 and follow the instructions at post #159 to install Google Services and Google Play to the Tablet.
That's it!!
vitocorl said:
Download Framaroot, install, run and select the first option. Reboot, run again and select the second option. Reboot and the tablet is rooted.
Visit http://forum.xda-developers.com/showthread.php?t=1893410&page=16 and follow the instructions at post #159 to install Google Services and Google Play to the Tablet.
That's it!!
Click to expand...
Click to collapse
Have you tried it with the specified Android tablets? Did it worked? Can you send an image proving it ?
Thanks anyway!
I have tried it, i have rooted 3 tablets in my company and i have installed Google Play on them. I cannot send you an image, since i do not have the tablets with me anymore, our sales people use them, but i can help you if you need something on the process. In fact, it is very-very easy to do it. Download and install framaroot, run it and select the only option visible. Reboot and run it again, you will have a second option, select it and reboot again-you are rooted!
Possible malfunction of framaroot
vitocorl said:
I have tried it, i have rooted 3 tablets in my company and i have installed Google Play on them. I cannot send you an image, since i do not have the tablets with me anymore, our sales people use them, but i can help you if you need something on the process. In fact, it is very-very easy to do it. Download and install framaroot, run it and select the only option visible. Reboot and run it again, you will have a second option, select it and reboot again-you are rooted!
Click to expand...
Click to collapse
Thanks for your help and time ! I tried to use framaroot but didn't work. After installation, the only visible option was "Aragorn", which I pressed but a message popped up saying that root was unsuccesful unfortunately no other options to press on main screen. Any other suggestions? I am open to anything, just help me root this disappointing product. Thanks again for your time
Reboot, run Framaroot again and then you will have the second option (boromir i think). Select Boromir and reboot again, finished!!!
Rooting TuRBOX HIVE IV 3G+GPS
vitocorl said:
Download Framaroot, install, run and select the first option. Reboot, run again and select the second option. Reboot and the tablet is rooted.
Visit http://forum.xda-developers.com/showthread.php?t=1893410&page=16 and follow the instructions at post #159 to install Google Services and Google Play to the Tablet.
That's it!!
Click to expand...
Click to collapse
THIS IS THE BEST METHOD EVER AND FAR AWAY !!!!!!!!!!!!!!!!!!!!
TOO FAST AND SECURE.
follow the steps as they discribed above.
Hello everybody,
VitoCorl... please, can you describe what you do with your HIVE IV then you root them. I buy one from plaisio, and there is no way to root them. Somebody, if know how ...PLEASE HELPPPPP.
please i need immediate help
i installed superuser on the hive iv
it worked fine for 3-4 months
but now all of a sudden its dead
no charge no boot nothing
just dead
since i have installed superuser i dont have warranty
right?
should i just take it back to the shop?
please help!
Turbo X Hive IV Bricked! Please help!!!
Hello!
I tried to install CWM recovery on TurboX Hive IV tablet and it stuck on the Allwinner A31S LOGO...
please, can anyone sent me a copy of the original stock Firmware or anything...
Does anyone knows a way to make it work again?
The technical information are the following
Turbo X Hive IV, 10.1", 1280 x 800 pixels, IPS panel, Front camera 0.3 mp, back camera 5mp, android 4.2.2, CPU QuadCore-A31 Series at 1.2 GH, Internal storage 16GB, Ram - 1GB, Wifi, Bluetooth, Mini HDMI, Micro USB 2.0 Micro usb 2.0 host , microSD card slot, Li-Ion 6000 mah
Model M10A9
Firmware 3.2_2013704
Kernel 3.3.0 [email protected] #4
Mr.Mefisto said:
Do you have binary file Su or Superuser.apk installed? If not is not rooted!!!!
Click to expand...
Click to collapse
hi .... i really want custom rom for this tablet ... any idea ?
Hello,I know that this thread is very old,but before one year, I tried to flash a custom recovery on my turbo x hive iv tablet, the
TWRP for Android One Second Generation MTK with code name seedmtk, because I thought it would work since my tablet was a mediatek device, but I falsely flashed the recovery on both boot and recovery partitions and bricked both recovery and boot modes.​I want to mention though that I have partial access to fastboot mode (I have installed also mtk drivers) and it seems that I can't flash to recovery partition,but I can flash on boot, so all I want from everyone here if it's possible, is the stock boot.img of this tablet because I'm almost sure that it will boot since system partition is not broken and it was booting before I flash on boot partition without recovery or factory mode though.
Anyway,with a few words if you bored of reading this,I want the boot + recovery.img if it's possible,I know this tablet can't do many things,but I would like to fix it.

[Q] Permanently high cpu load on my LT22i

Hello all,
I got a Sony Xperia P (LT22i) last christmas and I have been using a freexperia built ROM ever since. The ROM uses a Cyanogenmod 4.0.4 internally. Unfortunately my phone is often quite slow to respond to user input up to the point where it doesnt even unlock the screen when I press the button. If I use htop via adb I see the following:
Mem: 798852K used, 21644K free, 0K shrd, 17748K buff, 306296K cached
CPU: 56.3% usr 38.9% sys 2.9% nic 0.5% idle 0.0% io 0.0% irq 1.1% sirq
Load average: 5.29 5.61 5.30 4/690 6823
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
4063 4010 system S 384m 47.7 90.1 system_server
791 2 root SW 0 0.0 3.9 [kworker/0:2]
6323 4010 app_66 S 330m 41.0 3.2 net.osmand
3 2 root SW 0 0.0 0.3 [ksoftirqd/0]
1536 1 system S 62044 7.5 0.2 /system/bin/surfaceflinger
863 2 root SW 0 0.0 0.2 [mmcqd/1]
4962 4927 root R 1900 0.2 0.1 top
10 2 root SW 0 0.0 0.1 [ksoftirqd/1]
6212 2 root SW 0 0.0 0.1 [kworker/0:0]
1667 1 root S 5512 0.6 0.1 /sbin/adbd
840 2 root SW 0 0.0 0.1 [kworker/u:4]
3666 2 root SW 0 0.0 0.1 [kworker/u:5]
591 2 root SW 0 0.0 0.1 [av8100_thread]
6590 2 root SW 0 0.0 0.1 [kworker/1:2]
5130 4010 app_65 S 345m 42.8 0.0 {ockplus.android} org.adblockplus.andr
4306 4010 app_41 S 322m 40.0 0.0 {enmod.trebuchet} com.cyanogenmod.treb
4263 4010 app_46 S 318m 39.5 0.0 {e.process.gapps} com.google.process.g
4340 4010 radio S 310m 38.5 0.0 {m.android.phone} com.android.phone
5787 4010 app_64 S 303m 37.7 0.0 {android.youtube} com.google.android.y
5712 4010 system S 302m 37.6 0.0 {ndroid.settings} com.android.settings
The system_server seems to use up the entire CPU time causing my problems. Is there a way to fix the problem, if yes, who would I talk to about this?
Alternatively I would like to use another ROM. I have heard that my device has some quirks making it very hard to use most ROMs (most notably a broken audio driver?). For this reason I originally chose the freexperia builds despite the fact that that android version is not exactly up-to-date.
Is there another ROM that will work properly with my device?
Also I would like to know how to back up the relevant data: When I installed the current ROM, android wouldn't start until I reset the device and wiped the data in the process. I dislike every kind of backup that uses "the cloud" for obvious reasons. I just want to copy the data onto my laptop via USB (without using an App, free or not). I tried using "adb backup" but I am not sure which options I have to select to obtain the relevant data without having a >> 1 GB size BLOB on my laptop. Any ideas about that?
You would have more luck looking in your device specific subforum instead of general area.
http://forum.xda-developers.com/xperia-u

Categories

Resources