Super Prop v1.1
Build.Prop that is fully optimized for Xperia U and Sola.(Coming soon to other Devices)
Tired of Laggy and slow performance? Give SuperProp v1.1 a shot! Smoothen and fasten up your Rom with SuperProp v1.1
Features
v1.1
*Added a few more tweaks for optimization
*Some minor changes
v1
*Lighting Fast Boot (about 18 to 20 seconds)
*Better Battery Life (For sure)
*Phone goes into DEEPER sleep when on standby
*Overall System Smoothness
*Better Graphic Performance
*Better System Performance
*Better Picture Quality
*Better Video Recording Quality
*Film Like Video FPS Capture Rate (Experimental - Let me know the FPS of your Recorded Footages)
*Better Call Quality
*Better Signal Strength
*Better Network Strength
*Improved Bandwith
*Better 2G Speeds including EDGE as well as GPRS
*Better 3G Speeds
*Better Playback Performance
*Better Playback Speed
*Faster Media Streaming
*Faster Media Scanning
*Reduced Call Drop Rate
*Better Call Handling
*Developed from Stock ROM .54 build
*Compatible with any Stock Based ROM Tested on Vision ROM v4
And Many other loads of tweaks and many more coming. Suggestions are welcomed
Installation
->Take a nandroid backup just in case
-> Download the zip (Zip Updated [2/March] now Flashable). Download the new v1.1 zip packages.
-> Boot into CWM and flash it
->Done
If you want to use SuperProp v1 in your ROM's Please PM me and Give the credits Thank you!
Note
This is my first mod or tweak so please help and support me. Don't forget to hit the THANKS button for sure. Don't forget to RATE it too
If I have posted this into the wrong section please let me know.
DO NOT flash it on my rom PROJECT GX!
Will be porting it to other devices according to their requirements soon. Till then let me what all improvements are needed
Warning: I am not responsible for any damages caused to your phone by this. Please do not blame me for stuffs that are already stated by other devs and people
Special Thanks to
sijav
@[email protected]
acervenky
Click to expand...
Click to collapse
Cannot flash (flash aborted) . I m on munjery's stock rom with custom kernel!!!! help !
It cant be flashed because its just a zip with system folder and build prop in it.
The meta-inf folder isnt there - no script to run change the build prop file.
not work cwm install. zip file havent META-INF folder
dwaipayanray95 said:
Super Prop v1
Build.Prop that is fully optimized for Xperia Sola
Click to expand...
Click to collapse
boy what have you made?????????
just the system folder in the zip and that's it!!!!
no offences but plz do some research before posting anything........
thanks
Just replace the build.prop manually....
Re: [MOD] [Tweak] [Sola] SuperProp v1 | Build.Prop fully optimized for Sola 1/3/13
notass said:
Just replace the build.prop manually....
Click to expand...
Click to collapse
if that's the case then it should be mentioned in the OP...
Sent from my Xperia Sola using xda app-developers app
Re: [MOD] [Tweak] [Sola] SuperProp v1 | Build.Prop fully optimized for Sola 1/3/13
Bad idea! :thumbdown:
replacing build.prop file may cause many problems in most of roms.
How can you say compatible with any rom?
In my roms users will lose OTA functionality. :-\
Every custom rom has these tweaks.
It's not a development thread, should be moved.
Sent from my MT27i using xda premium
Re: [MOD] [Tweak] [Sola] SuperProp v1 | Build.Prop fully optimized for Sola 1/3/13
Divaksh said:
Bad idea! :thumbdown:
replacing build.prop file may cause many problems in most of roms.
How can you say compatible with any rom?
In my roms users will lost OTA functionality. :-\
Every custom rom has these tweaks.
It's not a development thread, should be moved.
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
Cant agree more..maybe this is just for stock rom without any modifications yet.can somebody test this on different roms?stocked and others.
theokoukoulis said:
Cannot flash (flash aborted) . I m on munjery's stock rom with custom kernel!!!! help !
Click to expand...
Click to collapse
aCorrupt said:
It cant be flashed because its just a zip with system folder and build prop in it.
The meta-inf folder isnt there - no script to run change the build prop file.
Click to expand...
Click to collapse
taylan08 said:
not work cwm install. zip file havent META-INF folder
Click to expand...
Click to collapse
@[email protected] said:
boy what have you made?????????
just the system folder in the zip and that's it!!!!
no offences but plz do some research before posting anything........
thanks
Click to expand...
Click to collapse
I am so sorry! :/
I forgot to insert the Meta INF folder! :/ Uploaded in a hurry! :/ Please replace the original build prop with this build.prop in the system's file!
notass said:
Just replace the build.prop manually....
Click to expand...
Click to collapse
@[email protected] said:
if that's the case then it should be mentioned in the OP...
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
Sorry again Ill Mention it
Divaksh said:
Bad idea! :thumbdown:
replacing build.prop file may cause many problems in most of roms.
How can you say compatible with any rom?
In my roms users will lose OTA functionality. :-\
Every custom rom has these tweaks.
It's not a development thread, should be moved.
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
Well I got all the tweaks together and a mistake again! Compatible with Stock Based Rom!
Its my first work! Maybe you could be a little more positive! :/
jzpokz said:
Cant agree more..maybe this is just for stock rom without any modifications yet.can somebody test this on different roms?stocked and others.
Click to expand...
Click to collapse
Works fine on Stock based ROM.
Updated ZIp
Okay people I have updated the zip file and its flashable now!
Please tell me whether its working or not and How's it!
Please be a little optimistic!
dwaipayanray95 said:
Okay people I have updated the zip file and its flashable now!
Please tell me whether its working or not and How's it!
Please be a little optimistic!
Click to expand...
Click to collapse
WHAT HAVE YOU DONE? ANYBODY DON'T FLASH THIS!!!!
Dude at least ask for help in making flashable zip instead of putting (copy pasting) acervenky script and it's meta inf!!!!
I can help you with that and will upload the corrected script but please remove the download thing
EDIT: here that should do it => http://www.mediafire.com/?jd9k13uhcqzfj55
Just look at /META-INF/com/google/android/updater-script (open it with notepad++ or any linux LF-text support notepad) and see what has been written!
dwaipayanray95 said:
Okay people I have updated the zip file and its flashable now!
Please tell me whether its working or not and How's it!
Please be a little optimistic!
Click to expand...
Click to collapse
another mistake....... just don't try and copy and paste everything what you get and place it in dev section.....else you will be reported.......I said earlier that do some research and the post anything........
Its better to ask for something then to risk......
Re: [MOD] [Tweak] [Sola] SuperProp v1 | Build.Prop fully optimized for Sola 1/3/13
dwaipayanray95 said:
I am so sorry! :/
I forgot to insert the Meta INF folder! :/ Uploaded in a hurry! :/ Please replace the original build prop with this build.prop in the system's file!
Sorry again Ill Mention it
Well I got all the tweaks together and a mistake again! Compatible with Stock Based Rom!
Its my first work! Maybe you could be a little more positive! :/
Works fine on Stock based ROM.
Click to expand...
Click to collapse
Im gonna test it..thanks!:thumbup:
sijav said:
WHAT HAVE YOU DONE? ANYBODY DON'T FLASH THIS!!!!
Dude at least ask for help in making flashable zip instead of putting (copy pasting) acervenky script and it's meta inf!!!!
I can help you with that and will upload the corrected script but please remove the download thing
EDIT: here that should do it => http://www.mediafire.com/?jd9k13uhcqzfj55
Just look at /META-INF/com/google/android/updater-script (open it with notepad++ or any linux LF-text support notepad) and see what has been written!
Click to expand...
Click to collapse
@[email protected] said:
another mistake....... just don't try and copy and paste everything what you get and place it in dev section.....else you will be reported.......I said earlier that do some research and the post anything........
Its better to ask for something then to risk......
Click to expand...
Click to collapse
Thanks a lot!.....I hope to learn stuffs soons enough!
sijav said:
WHAT HAVE YOU DONE? ANYBODY DON'T FLASH THIS!!!!
Dude at least ask for help in making flashable zip instead of putting (copy pasting) acervenky script and it's meta inf!!!!
I can help you with that and will upload the corrected script but please remove the download thing
EDIT: here that should do it => http://www.mediafire.com/?jd9k13uhcqzfj55
Just look at /META-INF/com/google/android/updater-script (open it with notepad++ or any linux LF-text support notepad) and see what has been written!
Click to expand...
Click to collapse
Seriously Thank you so very Much!
I get the script now
Re-Uploaded the zip
Re-uploaded the zip!
Special thanks to sijav and @[email protected]
dwaipayanray95 said:
Re-uploaded the zip!
Special thanks to sijav and @[email protected]
Click to expand...
Click to collapse
just mention in OP which ROM's are supported so that the thread remains clean.......
dwaipayanray95 said:
Re-uploaded the zip!
Special thanks to sijav and @[email protected]
Click to expand...
Click to collapse
And it would be better to press the thanks button instead of saying it!
Will this work in terra rom with vengeance kernel v1.25? Thanks :thumbup:
Sent from my ST25i using xda premium
Related
PESTANOID V4
Pestanoid was created from a ROM called Smultronic by GustavoRD78.
Hi all. I'm upgrading my ROM Pestanoid v4. It already has a good job and clean. Now it is in Pestanoid v4 cleaner than all versions. And also made several modifications thanks to our friends developers. With the provision of the best scripts and a small modifications to the framework folder. They made a great difference in this new work. Some people are having problems with the Panel. So I do not have this problem but if you have a problem you can flash a new panel for the correction. You will need to install the walkman button to work properly. Fix Google are optional install if you will only miss some application.
LOG Changer 13/10
V1 - SupremacyScript
Mod Walkman v8 in CLEAR BASS (ICS) by TK
XSInfinitySound_v1.1
SlaidyBoost-B1_SGS_By_Slaid480
More on init.d Scripts folder.
More Scripts on Build.prop
Cleaner on Android.
Black Android Themes
Stock Browser
Xperia Gallery very fast.
3D Camera and 3D Album
Full HD Camera
More RAM Memory
Installation in Bootloader YES
Just do the basic cleaning
1) Wipe Factory reset
2) Wipe Cache Partition
3) Wipe Dalvik Cache
4) Wipe Cache Battery
Installation in Bootloader NO
1) Factory Reset (Full wipe data)
2) wipe cache
3) Wipe Dalvik cache
4) format cache (mount and storage menu)
5) date format (mount and storage menu)
6) format system (mount and storage menu)
7) wipe battery stats
8) At the end of the installation, factory reset and wipe cache
A good tip if you want more speed in rom. After the first start to slow, Log back into CWM and do just Factory Reset.
The installation of Baseband are optional.
baseband_72_lww.ftf => http://d-h.st/cSc
ST17i_Baseband_77_Xperia Active.ftf => http://d-h.st/FNP
PESTANOID V4
http://d-h.st/Cbx
PESTANOID V3.5
http://d-h.st/E7p
PESTANOID V3
http://d-h.st/Bwq
PESTANOID V2
http://d-h.st/F2q
Fix Alarm and Clock
http://d-h.st/hib
Fix Google and More Apps
http://d-h.st/6fJ
I will not guarantee the same speed as the ROM after applying the fix.
_______________________________________________________________________________________________________
Credits to Employees
Gustavo RD78_________ForBase ROM .587
Sandy7_________For tips for improving the ROM
shuappy_________For Helped to improve the ROM
Kobzar666_________For Mod SystemUI.apkl QuickPainel
ThilinaC_________For Mod Walkman v8 no CLEAR BASS with XSInfinitySound_v1.1 (ICS) by TK
Serajr__________ For SystemUI Tab Layout Toggles
mv_style and stanlin salu's________For Mod Script Build.prop
[W] ar [H] ead and stanlin salu's________ForMod Script init.d
slaid480________ForSlaidyBoost
By eltonpestana have developed this project Pestanoid v4.0
Pics Bellow Pestanoid v4.0
Third-party applications is not accompanied
better stay that way, bcoz user can choose which script they want to use or just make a flashable zip for the booster script
=)
antr34 said:
better stay that way, bcoz user can choose which script they want to use or just make a flashable zip for the booster script
Click to expand...
Click to collapse
Thank you. I think add on Script Booster SuperChager V6. On Next my new version v3.0 And Add new Xperia V4 home.
Heres walkman key fix
download
nice work man...ill try it asap....
can u upload a mirror in devhost or mediafire
Are u sure the CM 9 kernel will work?
Baseband isn't updated
.77 is avable now.
Worked Now =)
mv_style said:
Heres walkman key fix
download
Click to expand...
Click to collapse
Thank you very MucH . nOW Work Key Walkman.
How to remove or replace those toggles from "painel rápido"?
sandy7 said:
nice work man...ill try it asap....
can u upload a mirror in devhost or mediafire
Click to expand...
Click to collapse
Thank you. i'm upload now on devhost ..... I can't uploader on mediafire because my file have more 200 Mb. =(
|Yes Work =()
MoonBlade said:
Are u sure the CM 9 kernel will work?
Click to expand...
Click to collapse
A member of the facebook group'm already and says it worked perfect with CM9 kernel., But I do not recommend because of the low level of 3D.
eltonpestana said:
A member of the facebook group'm already and says it worked perfect with CM9 kernel., But I do not recommend because of the low level of 3D.
Click to expand...
Click to collapse
its very-veryyy gooood,nice good,smooth
=
Steph310 said:
Baseband isn't updated
.77 is avable now.
Click to expand...
Click to collapse
Yes Now have Baseband your Device. Good Luck
slowdyve said:
How to remove or replace those toggles from "painel rápido"?
Click to expand...
Click to collapse
Go to the link http://forum.xda-developers.com/showthread.php?p=28520841&postcount=4
and follow the steps.
This rom is coustomized according to my modified stock ROM, which I dreamed, you jst made it true, you did a kickass job! Thanks
Sent from my WT19i using xda premium
stanlin salu said:
This rom is coustomized according to my modified stock ROM, which I dreamed, you jst made it true, you did a kickass job! Thanks
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Thank you very much. If you have some problem with my ROM. Talk with me here.
eltonpestana said:
Thank you very much. If you have some problem with my ROM. Talk with me here.
Click to expand...
Click to collapse
It wil gud, if u add power panel, with cwm and reboot and bravia engine, and a if possible u can add infinitysound mod, great ROM!
Sent from my WT19i using xda premium
For the next week v3
stanlin salu said:
It wil gud, if u add power panel, with cwm and reboot and bravia engine, and a if possible u can add infinitysound mod, great ROM!
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
For the next week I'll be working on a version v3. With more modifications and will add a Booster.
eltonpestana said:
For the next week I'll be working on a version v3. With more modifications and will add a Booster.
Click to expand...
Click to collapse
Thanks!
Sent from my WT19i using xda premium
Im Working on Pestanoid V3 This week
MOD delete
Changelog
HoloXperia Lite :
Final
-added option to flash kernel .sin file
0.1.1
-Initial release
NOTE: This version will be as sleak as possible
HoloXperia Pro :
Final
-added option to flash kernel .sin file
-fixed some code which wasn't working in beta 2
-every option is working now
Beta2
-Created a new tab called Developers options
-Included 2 new features that you all will love it
*Create a flashable zip
*Create a signed ROM.zip
-Cleaned some files
-Made it more user-friendly
Beta1
-Initial release
-Advanced Options created
I tested this tool to flash kernel & it works like a charm. It's very light to,less than 1 mb yet very useful. great work :good:
Thankyou bro ...I will add more features to it ..I am just getting confused what to add and what not to
Odp: [TOOL][XPERIA MDPI] HoloXperia 0.1.1-WINDOWS
Maybe something for adb. Making logs.
Will be better than commands in sdk
Sent from my WT19i using xda app-developers app
lsander said:
Maybe something for adb. Making logs.
Will be better than commands in sdk
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
you mean adb logcat ????
Re: [TOOL][XPERIA MDPI] HoloXperia 0.1.1-WINDOWS
I will try it soon, sounds great tool
Sent from my WT19i using xda app-developers app
logcat and ther stuff like pushing apps to phone or something. Actually it would good feature what I need because trying to port miui v5
lsander said:
logcat and ther stuff like pushing apps to phone or something. Actually it would good feature what I need because trying to port miui v5
Click to expand...
Click to collapse
Those features are present in the pro version
pro means what? for "pro" users or pay like in gplay? just asking
lsander said:
pro means what? for "pro" users or pay like in gplay? just asking
Click to expand...
Click to collapse
just additional features are added and any one can use it !! Download is in the attachement no need to pay
Lite is for users who do not develop or always change kernel ...Drag and drop is the best option
Pro is for those who develop and use their skills still in beta stage so 1 or 2 may not work
Beta2 with two exciting new features
See changelog // Downloads in attachement
I have 3 apks and I want to add them to rom.zip
how can I do that ?
thanks
masoudr said:
I have 3 apks and I want to add them to rom.zip
how can I do that ?
thanks
Click to expand...
Click to collapse
if your rom zip is signed then
-open your rom with winrar
-navigate to system/app/
-multi-select the 3 apks you want to push in the zip
-drag and drop in system/app
-press OK button to update the zip
chotu222 said:
if your rom zip is signed then
-open your rom with winrar
-navigate to system/app/
-multi-select the 3 apks you want to push in the zip
-drag and drop in system/app
-press OK button to update the zip
Click to expand...
Click to collapse
I did that,but when after installing rom,apps missing.
besides I extract these apps from another rom.
masoudr said:
I did that,but when after installing rom,apps missing.
besides I extract these apps from another rom.
Click to expand...
Click to collapse
You have to sign those apps with the signature of your new Rom..
ゞ(`')、ＳＯＮＹ ＸＭＰ 三( ゜∀゜)
masoudr said:
I did that,but when after installing rom,apps missing.
besides I extract these apps from another rom.
Click to expand...
Click to collapse
its better if you put that apk unsigned rom apks are not signed !
FINAL
Final version :
Changelog:
Lite
-added option to flash kernel .sin file
Pro
-added option to flash kernel .sin file
-fixed some code which wasn't working in beta 2
-every option is working now
See the OP(attachements) for downloads
Enjoy !!:highfive:
[ROM]{PORT} [JB] ExtremeSecurity Stock Jelly Bean, Nypon, "fast, smooth, secured"
Hello guys, girls
I'm here to proudly present the port of:
[ROM] [JB] ExtremeSecurity Stock Jelly Bean, fast, smooth, secured
No need to introduction,
this ROM has been created by munjeni, Very Stable, Fast, and most important of all It uses MIUI LBE Guard and MIUI App controll! those who uses miui know what these apps do!
In my opinion this is the best stock rom that has Xperia looks and have many futures,
Please do feel free to press thanx for him in this thread => http://forum.xda-developers.com/showthread.php?t=2277446 He was who make this rom working! (I just port it )
So let me :
Based on stock jb rom but new features: (I've update it to 6.2.A.1.100)
Full implemented MIUI LBE Guard (make your privacy secured)
Full implemented MIUI App Control (enable-disable app startup on boot)
Cpu control & cpu stats in settings menu
Dock
4 way reboot menu
Led settings from CM10 (FULL working)
Mobile BRAVIA Engine 2
WhiteMagic auto brightness mode
WARNING:
Do not install su
Do not install superuser or supersu
Do not root phone because its rooted
Do not use any other mod or apk or anything from other roms
Do not use flastool after installing our rom!
Do not use bin4ry root tool
Do not restore backups, instad of using backups install all apks from Playstore. Do not be lazy! Do not complain if something not working if you not folow my recomends!
If I forgot something please let me know
How to install:
Step 1:
1. Install oficial Sony Jelly Bean rom (6.2.A.1.100), which mean by SPC or Flashtool
Step 2 (proced only if you completed step 1):
1. Place zip to sdcard
2. Reboot to recovery
3. Wipe data factory reset (do not skip this)
4. Wipe system partition (do not skip this)
5. Install zip
6. Reboot
7. Configure your phone
8. Open LBE and enable root
9. Reboot
10. On next boot you will see confirmation warning dialog, grant and chech option "remember"
11. Reboot again
12. On next boot configure permissions for your apk using LBE feature
13. Enjoy
For update V1 Just install it through CWM no need to do anything more or do any wipe
If you installing all next versons, than you no need to wipe anything, simple install zip and boot, it will upgrade you to the new version!
Credits:
Me For porting it
Huge thanx to @munjeni ... for making it and put lot's of time and efforts to make working so don't forget to press THANKS for him too
@Pandemic for great moded Cpu Control & Cpu Stats applications (settings.apk is moded by by diferent way ) Please Do not Copy these Settings before Asking his Permission
Download Link:
V1: http://www.mediafire.com/?3ps3y3bn95vt6
you must download four part ... and then run Extream_Security_V1.part1.exe to extract Extream_Security_V1.zip
New update => http://www.mediafire.com/download/wje76li8a577204/EX.SE_Update_V1.zip
Screen Shots:
In Update V1
Changlog
First Initial Release
Update V1
duallshock3 controler
fixed missing stockrom services context menu calback class
playstation certified
small apps (note: there is left/right slider. When you add some other small apps you will not see + button, but you need to slide left/right to see + button again. I thinked there is problem but these small apps driver is on sliding principe, simple slide them to browse small apps )
my xperia
Addons
Stock kernel with Munjeni's Recovery ported by me (ADB and mass storage is working in recovery )
Working Xperia V Camera Mod 5.7.2 Cyber-shot™ ( You will get fc on video I'll try to fix it in future )
Wipe data of Camera In settings/apps/all
Flash the zip
Wipe Dalvik Wipe Cache that's all
Fully Working Taskswitcher by @Andrewas
sijav said:
[*]Do not use flastool after installing our rom!
Click to expand...
Click to collapse
Hello, I just have some questions about this part. What exactly do you mean by this?
Are users still able to flash back to stock after installing this ROM?
WizaJ said:
Hello, I just have some questions about this part. What exactly do you mean by this?
Are users still able to flash back to stock after installing this ROM?
Click to expand...
Click to collapse
It means that if you want to use this rom do not flash anything else please or try to root by Flashtool!
But if you want to get back to other roms you're free to do a full wipe
Guys after days working on this and porting every resource in every smali and xml I get to an unsolvable dead end
but @munjeni did made the rom for 1.100 so I port that again! now it's fully working and very stable
I'm now uploading the stable rom but my internet upload speed is 35kbps so expect to be uploaded at 3 hours from now on
sijav said:
Guys after days working on this and porting every resource in every smali and xml I get to an unsolvable dead end
but @munjeni did made the rom for 1.100 so I port that again! now it's fully working and very stable
I'm now uploading the stable rom but my internet upload speed is 35kbps so expect to be uploaded at 3 hours from now on
Click to expand...
Click to collapse
U fixed all resolution issues?
Sent from my ST25i using xda premium
bharat_goku said:
U fixed all resolution issues?
Sent from my ST25i using xda premium
Click to expand...
Click to collapse
I did but resources fix just wasn't enough the action ids was changed in 1.100 too so many many things go wrong and I get so many FC!!
but fortunately munjeni updated to 1.100 so I just ported again and now every thing is working greatly
EDIT: Sry miss understood your question,
I don't have any problem with Resolution cause I recompile the Xperia P stock framework with needed resources and PNGs ... no problem in resolutions!
The only thing is reboot, safeboot, LED, CPU Controll and CPU Statics Icon are small because I didn't find any large Icon for them, If anybody have large Icon Please kindly give it to me so I can't replace it
really really sry for the delay but Every time I upload this I encounter connection time out !!! some one must do something for our internet provider support
anyways After many many many attempts to upload here it is the link =>
V1: http://www.mediafire.com/?3ps3y3bn95vt6
you must download four part ... and then run Extream_Security_V1.part1.exe to extract Extream_Security_V1.zip
DELETED
bharat_goku said:
U fixed resolution bugs on this?
Sent from my Xperia U using xda premium
Click to expand...
Click to collapse
For the second time answer there is no any resolution bug or issue in this rom! I didn't just put framework-res.apk from munjeni I recompile the stock framework-res.apk and settings.apk with needed resources in xmls and PNGs. other modification does not have anything to do with resolution so if you want your rom does not have any resolution issue you need to add things in stock framework-res or at least put your correct hdpi PNGs and some resolution related xmls in your framework-res! have fun
sijav said:
For the second time answer there is no any resolution bug or issue in this rom! I didn't just put framework-res.apk from munjeni I recompile the stock framework-res.apk and settings.apk with needed resources in xmls and PNGs. other modification does not have anything to do with resolution so if you want your rom does not have any resolution issue you need to add things in stock framework-res or at least put your correct hdpi PNGs and some resolution related xmls in your framework-res! have fun
Click to expand...
Click to collapse
Oops sorry I missed the post on the previous page,just realized apologies, I'll send u the icons u requested for tomorrow, sorry again for not reading
Sent from my Xperia U using xda premium
bharat_goku said:
Oops sorry I missed the post on the previous page,just realized apologies, I'll send u the icons u requested for tomorrow, sorry again for not reading
Sent from my Xperia U using xda premium
Click to expand...
Click to collapse
Icons?! I requested?! what icon? when did I request? and for what I need icons? I guess you've just suddenly doing "over-read"
dude if you have any further request or any other question off the topic please kindly send me in pm or create another thread, don't spam the rom thread plz
sijav said:
Icons?! I requested?! what icon? when did I request? and for what I need icons? I guess you've just suddenly doing "over-read"
dude if you have any further request or any other question off the topic please kindly send me in pm or create another thread, don't spam the rom thread plz
Click to expand...
Click to collapse
The only thing is reboot, safeboot, LED, CPU Controll and CPU Statics Icon are small because I didn't find any large Icon for them, If anybody have large Icon Please kindly give it to me so I can't replace it
Click to expand...
Click to collapse
Apologies again didn't mean to spam,
Sent from my Xperia U using xda premium
bharat_goku said:
Apologies again didn't mean to spam,
Sent from my Xperia U using xda premium
Click to expand...
Click to collapse
Oh do you have reboot, safeboot, LED, CPU Controll and CPU Statics HDPI large Icons? (32X32? )
If you have it would be really much appreciate if you can give them to me
USB terthering disable?
sijav said:
Oh do you have reboot, safeboot, LED, CPU Controll and CPU Statics HDPI large Icons? (32X32? )
If you have it would be really much appreciate if you can give them to me
Click to expand...
Click to collapse
Yea most of those icons are on comp have an exam tomorrow so I'll send em once I can use my comp except Safeboot image though,
cpu. Stats and control icon u can take from pandemic's customized settings in the themes and apps section rest are just extracted from a friends Xperia s somewhere on my comp
Sent from my Xperia U using xda premium
minervehp said:
USB terthering disable?
Click to expand...
Click to collapse
No its working!
NOTE
Credits
All the credits for this fix go to its owner, farenheith, that opened this thread, and explained everything we could ask for, so please, make sure you've thanked him, before reading this, and keep in mind that he can ask me to close this thread, and I will if he wants.
This thread is principally thought to prevent questions and bothering to developers, like farenheith, who has kindly offered us a guide to make this fix ourselves.
I'm not a developer at all, so if I'm opening this thread, it's just because I've learned after tries how to make a modded framework.jar and I want to share as much as I can.
If you need a touchpad patch for your rom:
Tell me which rom you're using;
Provide me with the framework.jar file of that rom (you'll find it under /system/framework folder of your rom);
Remember that I can't test all the framework myself lol, so you'll have to test it.
Click to expand...
Click to collapse
DOWNLOAD SECTION
CyanogenMod 10
FXP230 and above -- Decryption Key blIM22AddCrtUZJztDVQDwsXm1p0ic1UmhdFhcGzImo Tested
FXP228 -- Decryption Key OIK5-jX8mPX9dd9bupqumm8E0CUQA3COh7ty6_9dRwg Tested
CyanogenMod 9
Krisdee's fix for FXP216 and above -- Tested
FXP205 -- Decryption Key dXrZlS07E1cWm1M-PnSgvFwuhipmMo59IH_X9D90HBc Tested
Other JellyBean roms
SuperJellyBean v5.5 -- Decryption Key a0NWThhWo49DaHAJn3nNo0fYxaNWiMvPBMwOcZj4AOI Tested
JellyZeusBean -- Decryption Key Z0rtfjg0UeJPJB382X1FOnksWdcnc-UVAp5D3reVM1g Not tested yet
Other ICS roms
MiniMI -- Decryption Key Vn4_KSY379pQ76RHDVnD7QGC1uJ5X2vgO-2i20mP8BU Tested
AROMA Installer
This AROMA Installer is an All-In-One package, meant to make testing easier.
Here is the download link, the installer will be updated if I make a new fix.
TouchPad-AROMA -- Decryption Key Bry5DHTbSBgETK8lqWRElijTggYDTwlLaa1w6aLZkRc
APP
Here
You may consider adding krisdee's fix for CM9.1, i think FXP216, here cause it's buried deep in the TouchpadFix thread. And giving him proper credit of course
Here is his post: http://forum.xda-developers.com/showpost.php?p=41961511&postcount=801
Good work with this btw, it's great someone took it to himself to continue farenheith's work on this.
igor_anta said:
You may consider adding krisdee's fix for CM9.1, i think FXP216, here cause it's buried deep in the TouchpadFix thread. And giving him proper credit of course
Here is his post: http://forum.xda-developers.com/showpost.php?p=41961511&postcount=801
Good work with this btw, it's great someone took it to himself to continue farenheith's work on this.
Click to expand...
Click to collapse
I made this thread for cm10,because it's more used than 9, so I will not include it
But I'll do my best to provide modded frameworks
the fix should work on all fxp roms as previous fix..from 210 untill 228 +..i think the latest that fanhreit fix worked well was fxp 210.not sure really. but all help is welcome.
smokerman said:
the fix should work on all fxp roms as previous fix..from 210 untill 228 +..i think the latest that fanhreit fix worked well was fxp 210.not sure really. but all help is welcome.
Click to expand...
Click to collapse
We need to check FXP changelog to say for sure, because if they've updated the framework, flashing this would result into misplaced strings/bootloop
CriGiu said:
We need to check FXP changelog to say for sure, because if they update the framework, flashing this would result into misplaced strings/bootloop
Click to expand...
Click to collapse
they updated the framework..as you can see on racingxplay there are a few misplaced strings on dialer.
smokerman said:
they updated the framework..as you can see on racingxplay there are a few misplaced strings on dialer.
Click to expand...
Click to collapse
If you need I could make a fix for your rom as well, just provide me the framework
My rom MiniMI (FXP205 , CM9) could use one aswell.
Note : I did my own attempt at this and thats the framework.jar included in the rom. It seems like i screwed up somewhere and as a result it did not fully work. It might be best if you take the original FXP205 framework and mod that instead.
henk717 said:
My rom MiniMI (FXP205 , CM9) could use one aswell.
Note : I did my own attempt at this and thats the framework.jar included in the rom. It seems like i screwed up somewhere and as a result it did not fully work. It might be best if you take the original FXP205 framework and mod that instead.
Click to expand...
Click to collapse
Ok man, i'll do it ASAP
I can't download the FXP228 . Do you have any other links for the fix ? Thanks.
X-Giga said:
I can't download the FXP228 . Do you have any other links for the fix ? Thanks.
Click to expand...
Click to collapse
Try this http://www.4shared.com/zip/2HZDVWYt/FXP228.html
Can I use the FXP228 fix on JellyZeusBean?
Sent from my R800i using xda app-developers app
X-Giga said:
Can I use the FXP228 fix on JellyZeusBean?
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Yup, haven't tested myself but it should work
Tried this on CM228, it is working with 9mm, but not FIFA, this may mean that the build.prop changes are not all in there. Will try and have a look tomorrow.
doesnt work on MIUI5..and yes i have backup of 3.7.12..but thanks for trying.
smokerman said:
doesnt work on MIUI5..and yes i have backup of 3.7.12..but thanks for trying.
Click to expand...
Click to collapse
Mh.. What happens, bootloop?
CriGiu said:
Mh.. What happens, bootloop?
Click to expand...
Click to collapse
yap.
smokerman said:
yap.
Click to expand...
Click to collapse
That's not bad at all, because that bootloop can only mean two things:
1: the changes made in the framework are incompatible/ in conflict with miui framework (the worst case)
2: you have no space in you system partition lol ( the best case, not what I think it is though )
Gonna test this myself when I get time, maybe I can figure out what's going on
clivejefferies said:
Tried this on CM228, it is working with 9mm, but not FIFA, this may mean that the build.prop changes are not all in there. Will try and have a look tomorrow.
Click to expand...
Click to collapse
Yeh, some of the build.prop values need to be changed. Check Fahrenheiths thread for the correct values. Works well on Fxp.
clivejefferies said:
Yeh, some of the build.prop values need to be changed. Check Fahrenheiths thread for the correct values. Works well on Fxp.
Click to expand...
Click to collapse
thanks for reporting: will do it asap
hello guys
I have made some tweaks for xperia sola roms that have init.d support
And any phone that supports init.d
Disclaimer [!]
1)I don't take any responsibility if you used my mod
2)if you don't have init.d support you will have a boot loop
3)don't trust benchmark scores they don't measure your most performance
Tests[^_^]
1)mc4 high quality apk runs smooth as butter in single player
2)battery more standby time
3)more free ram (195 mb)free with the standard background processes
4)more better multitasking
Tested on[!]
Project Xeon (works like a charm)
Current confirmed working on:
Aosp
Instructions for smoothyty[?]
1)open terminal and type those:
su
Killjoy and it will ask a question press 1 and enter to accept it
Su
Entro_on same thing accept
Done!
Credits:
Dwaipayanray 95 for his init.d folder
Me for adding a lot of scripts
Killjoy for entropy tweaks
Download link[-->
https://db.tt/NZsLxftM
Root [su] fix[-->
https://db.tt/f8yOoBx0
Feel free to tell me any thing or ask any thing you want
press the thanks button if I helped
Has battery life improved a lot on AOSP ROM's (Also XNovathor)?
Sent with my SXSola on SlimFXP
Will it work on Wolf v2?
Tapatalk
Skeleth said:
Will it work on Wolf v2?
Tapatalk
Click to expand...
Click to collapse
lol98lol98 said:
Has battery life improved a lot on AOSP ROM's (Also XNovathor)?
Sent with my SXSola on SlimFXP
Click to expand...
Click to collapse
XNova Thor I think it will work bec the project xoen based on it
But wolf I don't know
Here is the thing you must have a kernel and rom that supports init.d to make it boot or at the other side boot loop
I don't know how to fix init.d boot loops bec I tried to put a lot of scripts in many ROMs and I fail to make it boot
You can just try it and plz post feedback
And I will try to know how to make them boot on every device (peace)
A new zip will be posted after I get back from school
Doesn't work with XU using cm9
It doesn't boot.
not working ..
lost root after flashing this...
running honami moonwalker v5.5 on xperia p
Froz3 said:
Doesn't work with XU using cm9
It doesn't boot.
Click to expand...
Click to collapse
You must have init.d support to make it boot try aosp
pratikwatwanip said:
lost root after flashing this...
running honami moonwalker v5.5 on xperia p
Click to expand...
Click to collapse
The only goal is its booting then wait I will upload super su fix
At all I will work hard until I make it boot for every body It just work with me fine
Plz see if your kernel/ROM support init.d scripts
And I will try to find a fix for cayanogen mod
xperia modder said:
You must have init.d support to make it boot try aosp
The only goal is its booting then wait I will upload super su fix
At all I will work hard until I make it boot for every body It just work with me fine
Plz see if your kernel/ROM support init.d scripts
And I will try to find a fix for cayanogen mod
Click to expand...
Click to collapse
yeah but my phone was flying... :good:
I use this on XSola. My ROM is Stock ICS. It Worked.
so nw do i need to install the zip and restart the phone and then flash su zip or one after the other ???
Flash the Su if ur root disappeared then flash the su fix if not don't flash
And
To play high end games type
Su
Boost
1
2
And then
Su
Entro_on
1
Enjoy gaming
And if I made any other tweaks I will update
Any other feedback guys
I have found guys that there is some tweaks that are not compatible with some roms so I have foubd some of the incompatibles and when I finish I wil post it
Hi after installing this mod in my xu my phn is not working properly
My dialer is not working
Random reboots
Signal drops and etc.im using jb thunder strikerom
Eden blizzard said:
Hi after installing this mod in my xu my phn is not working properly
My dialer is not working
Random reboots
Signal drops and etc.im using jb thunder strikerom
Click to expand...
Click to collapse
I am sry for that but there is some tweaks wich is not compatible so install your rom again until I post tge fix as soon as possible
And I knew that when I used ultimate rom for sola I installed it and it bootlooped so I used some of them not them all and it booted so wait till I find out wich is incompatible
xperia modder said:
I am sry for that but there is some tweaks wich is not compatible so install your rom again until I post tge fix as soon as possible
And I knew that when I used ultimate rom for sola I installed it and it bootlooped so I used some of them not them all and it booted so wait till I find out wich is incompatible
Click to expand...
Click to collapse
thats not a prblm and I know u will fix it soon
May I ask... What the hell is this?! Dude, you just took zip file from @Exit_Only 's Operation Killjoy thread and added a whole bunch of scripts (50). And the worst thing is that like 15 or more of them do the same thing but have different values, this is pointless. Like really?
Moreover, the scripts are from various devs like Exit_Only (killjoy) or WindowsX (fidelity) and you didn't even give any credit.
Irseq said:
May I ask... What the hell is this?! Dude, you just took zip file from @Exit_Only 's Operation Killjoy thread and added a whole bunch of scripts (50). And the worst thing is that like 15 or more of them do the same thing but have different values, this is pointless. Like really?
Moreover, the scripts are from various devs like Exit_Only (killjoy) or WindowsX (fidelity) and you didn't even give any credit.
Click to expand...
Click to collapse
+1
@Irseq
Irseq said:
May I ask... What the hell is this?! Dude, you just took zip file from @Exit_Only 's Operation Killjoy thread and added a whole bunch of scripts (50). And the worst thing is that like 15 or more of them do the same thing but have different values, this is pointless. Like really?
Moreover, the scripts are from various devs like Exit_Only (killjoy) or WindowsX (fidelity) and you didn't even give any credit.
Click to expand...
Click to collapse
I only took kill joy because of the entropy tweak and I gave credit to the one provided me with some of these scripts.
And I am deleting some scripts that make a bootloop so if there is 50 scripts I think that there is 15 script only important and I dont need any of the others
Update will be soon after I finish mid year exams