Hey!
Im having problems with Flashmode on sony xperia U. Fastboot works just fine, but my phone wont stay in flashmode. I have installed drivers from Flashtool. I tried with diffrent usb- ports and on other pc.
Why do u keep it to stay in flashmode??
Are u connecting this way?
Phone switched off and disconnected from computer
Ftf prepared from flashtool
Pc asking to connect the phone in flashmode
Phone connected with volume down button pressed
drsanket_xperia_u said:
Why do u keep it to stay in flashmode??
Are u connecting this way?
Phone switched off and disconnected from computer
Ftf prepared from flashtool
Pc asking to connect the phone in flashmode
Phone connected with volume down button pressed
Click to expand...
Click to collapse
Yes, thats the way im connecting it.
I got ICS 61.1.B.1.54 software in my phone. I i will flash ICS 6.1.1.B.1.10 kernel, root the phone with Bin4rys metdod and then flash ICS 61.1.B.1.54 kernel back.
perkele90 said:
Yes, thats the way im connecting it.
I got ICS 61.1.B.1.54 software in my phone. I i will flash ICS 6.1.1.B.1.10 kernel, root the phone with Bin4rys metdod and then flash ICS 61.1.B.1.54 kernel back.
Click to expand...
Click to collapse
try installing drivers and then connect fone in flashmode and then let the driver get install and then disconnect and reboot your PC then after reboot start flashtool and then start the flashing process........
@[email protected] said:
try installing drivers and then connect fone in flashmode and then let the driver get install and then disconnect and reboot your PC then after reboot start flashtool and then start the flashing process........
Click to expand...
Click to collapse
Driver wont install because my phone goes off from flashmode before the driver gets succesfully installed :/
perkele90 said:
Driver wont install because my phone goes off from flashmode before the driver gets succesfully installed :/
Click to expand...
Click to collapse
first connect the fone and then press and hold the vol down button........ see if that helps.........
I solved it. Thanks for help. Rooted my phone
Sent from my ST25i using xda app-developers app
Hello,
I rooted my mobile way back in b.1.10. Yesterday I flashed indian firmware of b.1.54 & somehow my mobile had no root permissions any more. But the bootloader is still unlocked as I've checked. I want root permissions & I've found out that rooting is only possible if I downgraded to b.1.10 firmware.
Now am unable to install flashmode drivers. It did not ask me for these drivers yesterday when I flashed b.1.54.
How do I install them? Whenever i prepare flashtool for b.1.10.ftf to flash & switch off, connect my mobile in flashmode, it stays in flashmode for 3 seconds & skips into regular mode & there's an error message in flashtool.
How to install flashmode drivers?
Please help
Thanks
perkele90 said:
I solved it. Thanks for help. Rooted my phone
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Related
Hi guys, I have a st17i bricked phone, it won't boot, when I connect it to usb it is recognized as mpc and not msc, so it can't enter in flashmode. Can someone help me here? Thanks in advance
Have you unlocked bootloader or something? How did you bricked your phone, I need more informations..
Sent from my WT19i using XDA
tenea said:
Hi guys, I have a st17i bricked phone, it won't boot, when I connect it to usb it is recognized as mpc and not msc, so it can't enter in flashmode. Can someone help me here? Thanks in advance
Click to expand...
Click to collapse
Are you reffering to MTP?
What you you done before getting this issue?
Sent from my ST17i using Tapatalk
Thanks for responses, frankly I don't know what happend to it, it came to me already broken, trying to flash but it won't enter it in msc mode (@ puppet13th: yes, I was reffering to mtp), and I don't know how to switch to msc because it doesn't boot. Thanks a lot for your help
Is there a way to switch it to msc with adb push or something? Anyone can help me?
Sent from my LG-P500 using Tapatalk
Enter flashmode for flashtool
Hey....i don't think you need to switch it to MSC mode for flashing.... did you try to enter flashmode by holding "Volume down" button while inserting the USB cable into the phone ? Are you trying to flash it via Flashtool ( it is the easiest way ) ?
crazy_4_and1 said:
Hey....i don't think you need to switch it to MSC mode for flashing.... did you try to enter flashmode by holding "Volume down" button while inserting the USB cable into the phone ? Are you trying to flash it via Flashtool ( it is the easiest way ) ?
Click to expand...
Click to collapse
Yes, I tried to flash it with flashtool, but it won't recognize the phone, holding volume down while inserting usb, and the mini led light up orange, so... what else can I do? .. thanks
Did You switch the phone off before that?
Procedure is:
1) Switch off the phone (remove battery if needed)
2) Press "volume down" and hold
3) Put he USB cable in.
Do You see driver installation dialog running in windows? wait until it finishes.
4) Start the flashtool
5) Flash the ROM.
Yes, I did exactly the same, but it doesn't install the drivers
Sent from my LG-P500 using Tapatalk
Then You need to install either Sony PC companion or form the Sony develeoper site the proper drivers.
Sony PC Companion You find here
Pc companion will install all the SE xperia drivers You need.
tenea said:
Yes, I did exactly the same, but it doesn't install the drivers
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
You have drivers in Flashtool folder under : \flashtool\drivers install them , and accept all of the installation requests by Windows . Or install official drivers from Sony or from Google's SDK source .
:Flash a new kernel via FASTBOOT and install a rom or reflash the firmware with wotan client that worked for me
---------- Post added at 07:43 PM ---------- Previous post was at 07:37 PM ----------
zariin said:
Did You switch the phone off before that?
Procedure is:
1) Switch off the phone (remove battery if needed)
2) Press "volume down" and hold
3) Put he USB cable in.
Do You see driver installation dialog running in windows? wait until it finishes.
4) Start the flashtool
5) Flash the ROM.
Click to expand...
Click to collapse
I did it like this: connect phone in fastboot mode, then i installed the drivers manually when this is not working plug out your phone install PDA net on your computer, connect your phone in fast boot mode and the program will install the drivers
Sorry for my bad english
when you plug in your usb while holding volume down key the led should be green not orange.
green led means the phone is in flashmode.
Hi Guys i have this same problem whith my Xperia Active, when i on the tell its only vibrate.... i flashing this phone whith flashtool and new fw but still bricked , please help me!!
remove battery and put it again .... thn try to enter flashmode ... thn flash whatever you want.
prateek_gemini said:
remove battery and put it again .... thn try to enter flashmode ... thn flash whatever you want.
Click to expand...
Click to collapse
hi this not help ,any idea?
This may help you 90%... just try it
I also have bricked up my Xperia Neo V
I tried many tools but no one helped.....
Finally I got back my bricked phone back by doing following things....
download all the needed things you need to update phone with wotan X tool unlock, you will need
1. X_Unlock_Tool_Setup_Wotan
2. WotanClient
3. USBFlashDriver
you can get all these from wotan website.
also create an account on wotan website. NO NEED TO BUY ANY CREDITS
install all above mentioned tools.
then run X UNLOCK TOOL
then follow on screen instructions untill you get an error that you don't have sufficient credits.
NOTE THAT NOW YOUR PHONE HAS GOT A SIM LOCK CERTIFICATE FROM THIS TOOL. BUT THE POSITIVE ASPECT IS THAT YOU CAN NOW FLASH ANY ftf FILE USING FLASH TOOL. SIM LOCK WILL BE REMOVED AFTER THE WHOLE PROCESS.
now flash the desired firmware on your phone.
power up your phone
if it power ups successfully, then your phone will not detect your SIM card.
finally use S1 tool to remove SIM LOCK CERTIFICATE.
CLICK THANKS IF IT WORKS
BEST OF LUCK
Same issue
I am using an Unlocked Bootloader Xperia Ray and it got bricked when I tried to flash in Cyanogen mod 7 for Xperia Ray...
Now I am trying to flash stock roms using Flashtool but it is requiring me to be in Flasmode which obviously I can't do it. I have done the steps but it wont recognize my phone.
I am also trying to figure how to flash a kernel but every kernel that I download comes in an *.img format but FLASH TOOLs require FTF file to flash the kernel.. how can I do it?
spoinkyness said:
I am using an Unlocked Bootloader Xperia Ray and it got bricked when I tried to flash in Cyanogen mod 7 for Xperia Ray...
Now I am trying to flash stock roms using Flashtool but it is requiring me to be in Flasmode which obviously I can't do it. I have done the steps but it wont recognize my phone.
I am also trying to figure how to flash a kernel but every kernel that I download comes in an *.img format but FLASH TOOLs require FTF file to flash the kernel.. how can I do it?
Click to expand...
Click to collapse
Use fastboot mode instead of flashtool mode in flashtool
pikpok said:
Use fastboot mode instead of flashtool mode in flashtool
Click to expand...
Click to collapse
Do i have to change the file name of the kernels to boot.img to make it run in fast boot?
Hi,i recently flashed cyanogenmod to my XMP,but it is rather unstable,so i would like to return to stock ICS 4.0.4
I tried using flashtool to flash the stock rom but when it asks me to unplug the device,turn it off,and plug it in flashmode,i do it and it doesn't respond. The green light on the device turns on,but flashtool behaves like i didn't plug the divice.
Any help?
Forgot to mention,stupid that i am,i never did a backup before installing cyanogenmod.
Regular_John said:
Hi,i recently flashed cyanogenmod to my XMP,but it is rather unstable,so i would like to return to stock ICS 4.0.4
I tried using flashtool to flash the stock rom but when it asks me to unplug the device,turn it off,and plug it in flashmode,i do it and it doesn't respond. The green light on the device turns on,but flashtool behaves like i didn't plug the divice.
Any help?
Forgot to mention,stupid that i am,i never did a backup before installing cyanogenmod.
Click to expand...
Click to collapse
Have you got flashtool drivers installed? (flashtool installation folder > drivers)
So the green led comes up while you hold volume down and plug to pc without pressing power on just holding volume down and connect?
But flashtool doesn't recognize?
Can you flash a kernel? Does flashtool detect your device in fastboot mode?
Do you use the latest flashtool version?
Have you got flashtool drivers installed? (flashtool installation folder > drivers)
Click to expand...
Click to collapse
yep got the drivers installed.
So the green led comes up while you hold volume down and plug to pc without pressing power on just holding volume down and connect?
But flashtool doesn't recognize?
Click to expand...
Click to collapse
Yes.
Can you flash a kernel? Does flashtool detect your device in fastboot mode?
Click to expand...
Click to collapse
No,i cant' flash a kernel either,it says "ERROR - This action can only be done in fastboot mode",even when my device is connected in fastboot mode.
Do you use the latest flashtool version?
Click to expand...
Click to collapse
got the latest flashtool (0.9.6 ,had 0.9.2) but still the same.
Regular_John said:
yep got the drivers installed.
got the latest flashtool (0.9.6 ,had 0.9.2) but still the same.
Click to expand...
Click to collapse
After installing 0.9.6 install the drivers for all devices again, restart pc and try it again. If your phone connects in flashmode normally it should be a problem of flashtool, cause the phone enters flashmode correctly then. Be sure pc companion or sony update service aren't running in background!
still the same.
so, the problem would be that flashtool does not recognize my device,even though i have all drivers installed.
i guess i'll have to stick around with cm9 for now.
Use pcc
Sent from my E15i using Tapatalk 2
pcc won't work, i have cyanogenmod with unlocked bootloader.
Check you have usb debugging and marked unknown resources. Other than that try to install the flashtool again. Download the drivers again from the web.
Sent from my SK17i using xda premium
maybe try back to Gingerbread..... on my active fastboot is volume up....and blue led. volume down is download mode and green led....maybe here is problem
Its simple...
1. Flashtool Method...if its not working then proceed to 2
2. Flash another kernel like MESA v1.8 http://www.dropbox.com/sh/w6v6t0a72eh3n3k/I61LnlJJK7/sk17i_mini_pro
3. WIPE DATE/WIPE CACHE/FACTORY RESET/DALVIK CACHE(Whatever)
4. Flash a rom like Smultronic v3.5(ITS STOCK BASED ROM) by entering in recovery http://forum.xda-developers.com/showthread.php?t=1796272
5. Its a very good rom...but if you still not satisfied then now try the flashtool procedure...
---------- Post added at 10:32 AM ---------- Previous post was at 10:28 AM ----------
Many times it has happened with me also...flashtool doesnt recognize my XM so what i do is...
1. Select file to be flashed in flashtool in Flash Mode
2. Select everything..wipe data...wipe system...etc and den press the OK
3. Its says"Connect Device by...."
4. Power oFF the phone...
5. Connect the USB side to Pc...and before connecting the microUSB to phone hold the Volume down button and do not leave it till the flashing starts....
Try this and report back...
Regards,
Hit Thanks If I Helped YOu:fingers-crossed:
Ok, here's the deal...
I'm trying to root my phone using a tutorial, so I have to flash .10 and .54 kernels.
When I connect the phone to the PC the Flashtool log says that the Debugging mode is off while, but IT'S ACTIVATED AT DEVELOPER OPTIONS.
So I can't continue...
PS: Flashtool drivers installed, Android ADB drivers installed
Sony PC Companion installed.
Have a Sony Xperia Sola MT27i, Windows XP SP3 and the last version of Flashtool.
Please help!
Sent from my MT27i using xda app-developers app
In order to flash the kernels u need not have to enable usb debugging
So here what u should do
Switch off phone
Keep it aside
Select kernel.ftf to flash in flashtool
Flashtool will ask u to connect phone in flashmode
Just press the volume down button (phone should b pff) of ur phone pressed and attach to usb
Try to restart Flashtool with your device already plugged in with USB Debugging on.
Sometimes happen with me. I just restart Flashtool and it detects it.
Thank you both, but if I connect the phone while holding volume down button can recognize the device?
Sent from my MT27i using xda app-developers app
manudo said:
Thank you both, but if I connect the phone while holding volume down button can recognize the device?
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Yes it can
drsanket_xperia_u said:
Yes it can
Click to expand...
Click to collapse
Thank you man, I hope my phone don't get bricked.
Sent from my MT27i using xda app-developers app
manudo said:
Thank you man, I hope my phone don't get bricked.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Just dun flash anything that is not intended for ur phone
lenovo a690
doctor_droid said:
Just dun flash anything that is not intended for ur phone
Click to expand...
Click to collapse
good evening, i need some helps about the flastool using usb debug....
last night i intended to flash my a690 using another firmware that is s319. my reason was about to upgrade it to ics.
then i follow the instructions for flashing a690 using flashtool. it was succeed, i turn on the phone.... so the problem appeared, my phone can't login, even bootloop just in blank screen.
then i decided to back it firmware to stock rooom using flastool again.....and this information of error appeared.
i tried almost 3 hours by using another firmware but it wasn't succeed. i thought the error appeared because of the usb debug didn't click it.
so if there is anyone knew about this issued, please help me what should i do??
the first mistake that i had made so far was using another firmware fo my lenovo.
masjohnb0y said:
good evening, i need some helps about the flastool using usb debug....
last night i intended to flash my a690 using another firmware that is s319. my reason was about to upgrade it to ics.
then i follow the instructions for flashing a690 using flashtool. it was succeed, i turn on the phone.... so the problem appeared, my phone can't login, even bootloop just in blank screen.
then i decided to back it firmware to stock rooom using flastool again.....and this information of error appeared.
i tried almost 3 hours by using another firmware but it wasn't succeed. i thought the error appeared because of the usb debug didn't click it.
so if there is anyone knew about this issued, please help me what should i do??
the first mistake that i had made so far was using another firmware fo my lenovo.
Click to expand...
Click to collapse
Are you aware this is a forum for Xperia P U Sola and Go, we dunno no a690 or this flashtool :cyclops:
masjohnb0y said:
good evening, i need some helps about the flastool using usb debug....
last night i intended to flash my a690 using another firmware that is s319. my reason was about to upgrade it to ics.
then i follow the instructions for flashing a690 using flashtool. it was succeed, i turn on the phone.... so the problem appeared, my phone can't login, even bootloop just in blank screen.
then i decided to back it firmware to stock rooom using flastool again.....and this information of error appeared.
i tried almost 3 hours by using another firmware but it wasn't succeed. i thought the error appeared because of the usb debug didn't click it.
so if there is anyone knew about this issued, please help me what should i do??
the first mistake that i had made so far was using another firmware fo my lenovo.
Click to expand...
Click to collapse
Hello, necro-poster!
Didn't knew that Lenovo maked phones with Android OS, we always learn something everyday.
One advice, you can try to ask that in this forum.
And for all, my problem was solved, months ago. Thank you everyone.
minor driver bug try installing windows again ...
doctor_droid said:
In order to flash the kernels u need not have to enable usb debugging
So here what u should do
Switch off phone
Keep it aside
Select kernel.ftf to flash in flashtool
Flashtool will ask u to connect phone in flashmode
Just press the volume down button (phone should b pff) of ur phone pressed and attach to usb
Click to expand...
Click to collapse
its just a driver issue i had it many times in my laptop so i installed flash tool in my desktop
it was working fine ... and there is an bug in 64 bit version i think so
my phone not booting ,its showing xperia wave ....
when i try to flash it shows the debugging is off what i can do?
plz help me bro.... thank you ...
hope u helpme...
Hi all, if anyone is having trouble flashing with flash tool because usb debugging isn't enabled error then do this procedure.......
1. Dowload latest flash tool 0.9.18.8 and also version 0.6.6
2. Try use the latest version first to Flash the tft rom. NOTE: remember the file it has error flashing e.g on my experia sp file system.sin was not able to Flash bcoz usb debugging error (enable usb debugging and unknown sources) ALL THE REST of the files flashed ok!
3.try flash again the rom but this time tick system.sin (or error file) in flashtool to exclude it from flashing. Make sure all other files are included. Also tick all wipe caches options and flash rom without system.sin (or error file).
4. Flash procedure will work. Now disconnect phone and leave it off without restarting it.
5. Uninstall flashtool latest version 0.9.18.8 and install flashtool 0.6.6 old version and open it to Flash the same rom BUT THIS TIME only select the system.sin file (or error file) to be flashed and rest excluded. Make sure all wipe options in flashtool are enabled and Flash! THE FLASH WILL WORK WITHOUT USB DEBUGGING ERROR and your phone will be fixed!
Press thanks if it helped!
doctor_droid said:
In order to flash the kernels u need not have to enable usb debugging
So here what u should do
Switch off phone
Keep it aside
Select kernel.ftf to flash in flashtool
Flashtool will ask u to connect phone in flashmode
Just press the volume down button (phone should b pff) of ur phone pressed and attach to usb
Click to expand...
Click to collapse
from where i can download kernel.ftf
developers help me!! i have sony ericsson live with walkman wt19i with locked bootloader,after installing new mod rom via cwm recovery phone doesn't turning on. And when it does obly the logo of sony come ups and that's it. When i'm trying to do it hrough usb in the computer, computer can't see device and there's written: unknown usb device
instal flashtool and drivers from the folder inside the zip, and then flash stock rom.
Mysteryagr said:
instal flashtool and drivers from the folder inside the zip, and then flash stock rom.
Click to expand...
Click to collapse
im'trying but pc now can't recongized phone,yuo can see images
madjacky said:
im'trying but pc now can't recongized phone,yuo can see images
Click to expand...
Click to collapse
Well. when this happen to me. I install different copy of windows or try from different pc
madjacky said:
developers help me!! i have sony ericsson live with walkman wt19i with locked bootloader,after installing new mod rom via cwm recovery phone doesn't turning on. And when it does obly the logo of sony come ups and that's it. When i'm trying to do it hrough usb in the computer, computer can't see device and there's written: unknown usb device
Click to expand...
Click to collapse
connect in flashmode?
or try to flash ics stock
guide in my signeture
noob to extreme user guide!
prantoroy said:
connect in flashmode?
or try to flash ics stock
guide in my signeture
noob to extreme user guide!
Click to expand...
Click to collapse
no can't connect in flashmode,pc can't recognized device
madjacky said:
no can't connect in flashmode,pc can't recognized device
Click to expand...
Click to collapse
without flashmode or fastboot.
u r in trouble.
only way is to contact service.
prantoroy said:
without flashmode or fastboot.
u r in trouble.
only way is to contact service.
Click to expand...
Click to collapse
any ideas why could such a problem?
madjacky said:
any ideas why could such a problem?
Click to expand...
Click to collapse
How did you try to enter flashmode?
Install all drivers from flashtool>drivers for all modes/devices. Then you take out the battery of your phone and reinsert it. Now press and hold volume down and connect the usb. Don't power the phone on, just press volume down and connect. The green led should light up and you are in flashmode
Then you can flash the stock rom using flashtool :good:
Sent from my Nexus 4 running Android 4.2.2
mihahn said:
How did you try to enter flashmode?
Install all drivers from flashtool>drivers for all modes/devices. Then you take out the battery of your phone and reinsert it. Now press and hold volume down and connect the usb. Don't power the phone on, just press volume down and connect. The green led should light up and you are in flashmode
Then you can flash the stock rom using flashtool :good:
Sent from my Nexus 4 running Android 4.2.2
Click to expand...
Click to collapse
i'm installing all drivers but when i hold volume down and connect to pc led is green but pc can't rekognized usb device
madjacky said:
i'm installing all drivers but when i hold volume down and connect to pc led is green but pc can't rekognized usb device
Click to expand...
Click to collapse
Is the device marked as "unknown devices" or what happens when you connect?
mihahn said:
Is the device marked as "unknown devices" or what happens when you connect?
Click to expand...
Click to collapse
yes , device marked as unknow devices when i'm connecting phone to pc
mihahn said:
Is the device marked as "unknown devices" or what happens when you connect? [/QUOTE
you can see on images
http://forum.xda-developers.com/showthread.php?t=2382151
Click to expand...
Click to collapse
Try on another pc...
Or
Reinstall windows ...connect phone to windows and patiently wait for drivers to be installed using windows update service via internet...
After that put device in flash/green LED mode ,then patiently wait for flash mode drivers to be installed ...
Use flashtool or update service to go back to stock ROM
This is a windows issue so the thumb rule is "reboot windows,try on another windows,reinstall windows.."
madjacky said:
mihahn said:
Is the device marked as "unknown devices" or what happens when you connect? [/QUOTE
you can see on images
http://forum.xda-developers.com/showthread.php?t=2382151
Click to expand...
Click to collapse
dude if u connect with flash /fastboot mode it will DONT SHOW ur device but u have the ability to flash images (rom, kernel) onto phone if u get into fastboot, (blue led) flash new kernel using cmd method (no tools programs, just old fashioned )
if u get into fastboot the only open flashtool select ur flash stuff, it will tell u turn off phone , do this than connect it via flashmode (green led, flashtool should be flashin -..)
also i see sony bootlogo that means u hav a custm kernel and ur probably on UNLOCKED bootloader??? did u ever tried get to your recovery??? (pressing volume down continusly when boot up?????)
Click to expand...
Click to collapse
bejunk said:
madjacky said:
dude if u connect with flash /fastboot mode it will DONT SHOW ur device but u have the ability to flash images (rom, kernel) onto phone if u get into fastboot, (blue led) flash new kernel using cmd method (no tools programs, just old fashioned )
if u get into fastboot the only open flashtool select ur flash stuff, it will tell u turn off phone , do this than connect it via flashmode (green led, flashtool should be flashin -..)
also i see sony bootlogo that means u hav a custm kernel and ur probably on UNLOCKED bootloader??? did u ever tried get to your recovery??? (pressing volume down continusly when boot up?????)
Click to expand...
Click to collapse
my phone with locked boot loader so i can't flash via fastboot yes i'm try get to cwm recovery but nothing
Click to expand...
Click to collapse
Hi all, I have xperia mini with unlock bootloader and rooted. Yesterday my device bricked. I unbricked with octapus and wotan. After that i install with flashtool the Xperia Mini (ST15i)_4.0.2.A.0.42_CE ftf. And the problem Start. I make a big mistake. I try update my device with pc companion to .587 version. After that i can't enter in flashmode and fastboot!!!!!! I install a kernel from mike with flashtool Reboot into fastmode(via ADB) and my phone working again but the problem with flashmode and fastboot exists. Pls someone help me. thank u all
So..you cant flash firmware/kernel anymore??
Sent from my Xperia Ray (ST18i) using XDA Premium 4 mobile app
Exactly!
hi
vassilis91 said:
Hi all, I have xperia mini with unlock bootloader and rooted. Yesterday my device bricked. I unbricked with octapus and wotan. After that i install with flashtool the Xperia Mini (ST15i)_4.0.2.A.0.42_CE ftf. And the problem Start. I make a big mistake. I try update my device with pc companion to .587 version. After that i can't enter in flashmode and fastboot!!!!!! I install a kernel from mike with flashtool Reboot into fastmode(via ADB) and my phone working again but the problem with flashmode and fastboot exists. Pls someone help me. thank u all
Click to expand...
Click to collapse
1.Switch off your mini
2.remove battery and wait for 5 seconds before you reinsert it
3.keep holding upper volume button and connect usb cable (make sure its already connected to PC)
4.if there's blue notification light, then its fastboot mode.
5.Also you need fastboot driver installed from sdk on your PC
May be, if you are familiar with all above steps, i guess something wrong on PC. check with removing & reinstalling fastboot driver from sony's site
dragonX1 said:
1.Switch off your mini
2.remove battery and wait for 5 seconds before you reinsert it
3.keep holding upper volume button and connect usb cable (make sure its already connected to PC)
4.if there's blue notification light, then its fastboot mode.
5.Also you need fastboot driver installed from sdk on your PC
May be, if you are familiar with all above steps, i guess something wrong on PC. check with removing & reinstalling fastboot driver from sony's site
Click to expand...
Click to collapse
I am familiar with this steps. It's not pc problem. My st15i trim area it's damaged maybe after phone bricked.
vassilis91 said:
Hi all, I have xperia mini with unlock bootloader and rooted. Yesterday my device bricked. I unbricked with octapus and wotan. After that i install with flashtool the Xperia Mini (ST15i)_4.0.2.A.0.42_CE ftf. And the problem Start. I make a big mistake. I try update my device with pc companion to .587 version. After that i can't enter in flashmode and fastboot!!!!!! I install a kernel from mike with flashtool Reboot into fastmode(via ADB) and my phone working again but the problem with flashmode and fastboot exists. Pls someone help me. thank u all
Click to expand...
Click to collapse
You say you had unlocked bootloader before flashing ST15i)_4.0.2.A.0.42_CE ftf
And then you upgrade to .587 via pc companion ?
Because AFAIK when I tried updating same on my friends phone with unlocked bootloader. Pc companion denied to update because of software modification.
And if you were successfully updated then most probably your bootloader is relocked. So you may wanna check that!
Also try for hard reset if possible!
Sent from my ST15i using XDA Free mobile app
dragonX1 said:
You say you had unlocked bootloader before flashing ST15i)_4.0.2.A.0.42_CE ftf
And then you upgrade to .587 via pc companion ?
Because AFAIK when I tried updating same on my friends phone with unlocked bootloader. Pc companion denied to update because of software modification.
And if you were successfully updated then most probably your bootloader is relocked. So you may wanna check that!
Also try for hard reset if possible!
Sent from my ST15i using XDA Free mobile app
Click to expand...
Click to collapse
My bootloader is still unlocked because i flash a boot.img kernel via adb fastboot!
Problem solved by @kks111 . My TA was damaged and i had simlock too. He remotely fixed it with 4SE tool . Thanks again
Thats good
Sent from my ST15i using XDA Free mobile app