I don't have any USB device connected other than the mouse on PC. i have even tried on my laptop with no mouse.
I have downloaded pit file and uvjfd.tar two times from the forums.
I have tried flashing multiple times from both my PC & laptop using Odin 3.0 v1.0, v1.85, v3.07(latest), EZOdin v1.70 and installed Samsung USB drivers multiple times, even downloaded latest driver version from official Samsung Vibrant page.
I have tried flashing from all possible USB ports on my PC & laptop wherever the phone was being recognized. But now with the latest official Samsung Vibrant drivers, my phone is not being detected by any USB port on my PC.
But whenever I have flashed, Odin is stuck at Cache or Modem or recently(with latest samsung drivers), DO NOT TURN OFF TARGET !!
I have even tried flashing through Heimdall 1.3.1 but the zadig.exe shows the device only as 'Gadget Serial' no matter how many times I try, and installs the driver with device as Gadget Serial under libusb in Device Manager and I also tried by updating driver as Samsung Composite USB as mentioned in readme. Either Way Heimdall frontend will not flash and says "Failed to detect compatible download-mode device".
Edit: I tried with another USB cable, of LG GS500v, and Oh Lord Jesus, Odin flashed past it. Great, time to buy a new Samsung USB cable, now!
PROBLEM SOLVED
parasharenator said:
I don't have any USB device connected other than the mouse on PC. i have even tried on my laptop with no mouse.
I have downloaded pit file and uvjfd.tar two times from the forums.
I have tried flashing multiple times from both my PC & laptop using Odin 3.0 v1.0, v1.85, v3.07(latest), EZOdin v1.70 and installed Samsung USB drivers multiple times, even downloaded latest driver version from official Samsung Vibrant page.
I have tried flashing from all possible USB ports on my PC & laptop wherever the phone was being recognized. But now with the latest official Samsung Vibrant drivers, my phone is not being detected by any USB port on my PC.
But whenever I have flashed, Odin is stuck at Cache or Modem or recently(with latest samsung drivers), DO NOT TURN OFF TARGET !!
I have even tried flashing through Heimdall 1.3.1 but the zadig.exe shows the device only as 'Gadget Serial' no matter how many times I try, and installs the driver with device as Gadget Serial under libusb in Device Manager and I also tried by updating driver as Samsung Composite USB as mentioned in readme. Either Way Heimdall frontend will not flash and says "Failed to detect compatible download-mode device".
Edit: I tried with another USB cable, of LG GS500v, and Oh Lord Jesus, Odin flashed past it. Great, time to buy a new Samsung USB cable, now!
PROBLEM SOLVED
Click to expand...
Click to collapse
Dont worry....this time go to download mode and flash eugenes that does not brick aka Eugene_2E_JK2_Froyo with the same pit file and ur good to go brother
Similar Problem but different results.
Hi!
Whomever can help me, please help me. Right now, I am on stock Froyo 2.2 after the factory reset so this is how I got it but it is rooted only. I am trying to overwrite CWM because I cannot get into its recovery no matter how many times I flash it. Odin just will not recognize my phone when I am in download mode. When my phone is on, it will allow the mass storage and that works but when in download mode, my PC says unrecognized devide. I have a feeling that is the problem and I have updated the drivers several times, especially from Samsung but to no avail. Does someone have a solution to this problem? I want to go to Avatar ROM with my phone which is Jelly Bean and have seen its possible but I feel CWM is holding me back.
Thank you in advance!
David Carlton
david.carlton.jr38 said:
Hi!
Whomever can help me, please help me. Right now, I am on stock Froyo 2.2 after the factory reset so this is how I got it but it is rooted only. I am trying to overwrite CWM because I cannot get into its recovery no matter how many times I flash it. Odin just will not recognize my phone when I am in download mode. When my phone is on, it will allow the mass storage and that works but when in download mode, my PC says unrecognized devide. I have a feeling that is the problem and I have updated the drivers several times, especially from Samsung but to no avail. Does someone have a solution to this problem? I want to go to Avatar ROM with my phone which is Jelly Bean and have seen its possible but I feel CWM is holding me back.
Thank you in advance!
David Carlton
Click to expand...
Click to collapse
Can you explain the steps your taking when you try to get into odin
Sent from my SGH-T959 using xda app-developers app
The steps I take is put the phone into download mode by pulling the battery and then holding both the volume up and down then reinsert the battery. It shows the download screen. I then start odin and I have tried version 1.7 and the latest version of 3.0.7. Then I plug my phone into the USB port and windows pops up saying unrecognized device. I have reinstalled drivers several times. Now to describe my desktop is that it is a pentium III 550 Mhz...and old computer and running Windows XP Professional. I am able to do the mass storage when the phone is on normally so it recognizes it that way though. I have tried different USB ports on it as well so just unsure. I have rooted the phone and have superuser app access. ROM manager was supposed to have flashed the recovery mode but it never goes into the CWR mode either and its version is 2.5.1.2 which I have seen work on these phones in videos on YouTube so guess I am trying a different route so I can play with the mods to find a ROM I like. I was going to try the Avatar ROM for the vibrant but just cannot seem to get to the point where I can get the ROM flashed. Any help would be greatly appreciated.
Keep the battery in and lull up Odin. Cut off the phone and hold both volumes while inserting USB hopefully the computer will then recognize it
Sent from my GT-I9000 using xda app-developers app
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Click to expand...
Click to collapse
Stay away from kies I will Brick your device as for the computer being old I don't know. I've never had this problem before. Sorry o couldn't help
Sent from my GT-I9000 using xda app-developers app
david.carlton.jr38 said:
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Click to expand...
Click to collapse
USB cable does make difference. And USB ports even on the same computer. Check also your phone's drivers. Finally, try out Heimdall one-click package for t959, it is more powerful and sensitive than Odin.
Good luck
ioancr said:
USB cable does make difference. And USB ports even on the same computer. Check also your phone's drivers. Finally, try out Heimdall one-click package for t959, it is more powerful and sensitive than Odin.
Good luck
Click to expand...
Click to collapse
Do you have the link to the Heimdall one-click package or do I just google it?
david.carlton.jr38 said:
Do you have the link to the Heimdall one-click package or do I just google it?
Click to expand...
Click to collapse
I found the link:
http://d-h.st/M93
on the Repository thread: http://forum.xda-developers.com/showthread.php?t=1875966
And since only thing remaining in your case is USB cable, I would say try with a different micro USB cable, even a different vendor's will do, as it did the trick for me( see the edit in OP)
I will try that. Thank you! I need to get a car charger anyway so I can get a usb adapter for the car and a usb cable and try it that way.
Sent from my SGH-T959 using xda app-developers app
david.carlton.jr38 said:
I will try that. Thank you! I need to get a car charger anyway so I can get a usb adapter for the car and a usb cable and try it that way.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
For now, you can try any micro usb cable that fits, they all have same specifications.
Okay. Thanks!
Sent from my SGH-T959 using xda app-developers app
Stuck on cache
I'm also stuck on cache & I have tried more than one USB cable. Is there something else that I might be doing wrong? I'm completely uninclined technologically. The fact that I got my phone into download mode after 'bricking' is a feat in itself. Now what do I do when I'm stuck??
Mentalmama said:
I'm also stuck on cache & I have tried more than one USB cable. Is there something else that I might be doing wrong? I'm completely uninclined technologically. The fact that I got my phone into download mode after 'bricking' is a feat in itself. Now what do I do when I'm stuck??
Click to expand...
Click to collapse
Great that you could get it to the download mode.
Follow these steps:
1. Make sure that you have the correct drivers installed for your Operating System. Preferably, download the latest drivers. You can verify when your device is recognized when connected in download mode.
2. Make sure you follow this thread for Odin flashing http://forum.xda-developers.com/showthread.php?t=849028
3. If unable to flash using ODIN successfully, try with different USB ports, on same computer or a different one, say, a laptop.
4. If still unable to do so, try with different USB cables (any micro-usb should do).
In this way, you should by trying multiple alternatives at each step you should be able to eliminate the options and figure out what is really creating the problem in your flashing. Trust me my friend, this has not go anything to do with technology. just follow the steps, try alternatives and you would resolve this. Do post back on thread, if you have any queries.
Related
i picked it up used with stock rom, no mods. i rooted, then installed nero v3 with voodoo and then v5 with voodoo.... then i tried a custom battery mod and it screwed my phone up... cant get past the vibrant start screen, cant read the ext sd and the phone drivers will not work... computer detects it, but no drivers are installed. i have used the 32 bit driver 64 bit drivers, kies, kies mini, odin v1 and v1.7, still nothing... i can get into cwm recovery, but only with voodoo enabled, and can get into download mode, but i cant seem to get the computer to read it. have used 4 different computer, win 7 and 32 bit xp....also have tried drivers with pdanet and easy tether, but still no luck... can you offer any help to me??? thanks in advance.
as of u have done so much and nothing helped i would cry , and for not readin on how to unbrick your phone right on top of the forum you should cry too .
and if look good enough every 3rd thread that is made is how to unbrick the phone
@bartek
OK...OMG dude... you had like 5 posts 3 days ago...how are you helping this individual out other then giving him all your illegible ramblings that you are posting and ridiculing individuals as you go .. I'm sry, I don't mean to rant but damn...
Anyway OP, your just soft bricked. If you can get into d/l mode then I would either go ahead and ODIN back or if you can get into CWM recovery and you still have Nero 5 in your root, I would just reflash it and it should take care of it...enable voodoo when you flash Nero 5 ..you should be ok.
First off, I have been searching the forums for almost two weeks now and cannot find a solution....I have tried everything......the first problem is that no matter what drivers I use, the computer still says usb device not recognized, so I cannot get odin or heimdall to communicate, neither kies or kies mini.....
Well, now I turned it on this morning and I cannot get into cwm or dload mode.....just keeps bootlooping and linda talks and says riskful operation, then reboots......I am lost, don't know what else to do, I'm gonna throw this phone out the window
Sent from my HTC Vision using XDA App
bouzouki said:
First off, I have been searching the forums for almost two weeks now and cannot find a solution....I have tried everything......the first problem is that no matter what drivers I use, the computer still says usb device not recognized, so I cannot get odin or heimdall to communicate, neither kies or kies mini.....
Well, now I turned it on this morning and I cannot get into cwm or dload mode.....just keeps bootlooping and linda talks and says riskful operation, then reboots......I am lost, don't know what else to do, I'm gonna throw this phone out the window
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I would say Odin is your friend. go back to stock and start over Here is a start
http://www.youtube.com/watch?v=KyAIUOYufrU
Part 2: http://www.youtube.com/watch?v=33I-aNCypVM
hope this helps you
no dont throw the phoine out give it to mee ! or u can just remove your battery while phone is hooked up to computer with usb push volume up and volume down hold it put battery in , yellow android showed up ? u good to odin if he didnt redo repeat those steps until u will see him
how can i get odin to communicate when the computer wont read it?? it says usb device not recognized and no matter which drivers i install, it wont communicate.... and plus odin wont connect, i have tried multiple times.....heimdall drivers wont install either, it gives me a failed result.... i have used the 32 bit drivers, 64 bit drivers, kies, kies mini for vibrant, odin, heimdall, everything.... i have a g2 and have done so much to it with no problems, this phone has got me confused...
u need damn download mode for odin to see your phone damn could you just do those steps that i told you ? and btw open up odin so u can see when u phone is detected it will light up i nyellow
onc3 again
1. phone connected to computer
2.odin open
3.take out battery (out of your phone)
4.hold volume up volume down (allthe time)
5.put battery back in
6. put files in odin flash back
bouzouki said:
how can i get odin to communicate when the computer wont read it?? it says usb device not recognized and no matter which drivers i install, it wont communicate.... and plus odin wont connect, i have tried multiple times.....heimdall drivers wont install either, it gives me a failed result.... i have used the 32 bit drivers, 64 bit drivers, kies, kies mini for vibrant, odin, heimdall, everything.... i have a g2 and have done so much to it with no problems, this phone has got me confused...
Click to expand...
Click to collapse
I gotcha.... not to sound like an idiot but have you tried a different usb port? If your using one on the front, try ones in the back if your on a desktop.. if that doesnt work try running ODIN in XP SP3 compatibility mode
bartek25 said:
u need damn download mode for odin to see your phone damn could you just do those steps that i told you ? and btw open up odin so u can see when u phone is detected it will light up i nyellow
Click to expand...
Click to collapse
I think he's saying that odin doesn't detect his phone and therefore doesn't light up yellow. Happened to me too. I'm on the epic. I tried everything. But odin finally found my device. Try different usb ports, a different wire, reboot both phone and pc. Switch between usb debugging on and off. Try it with sideloading enabled and not. I eventually found a combimation that worked. These phones are fickle. It'll work eventually.
Sent from my SPH-D700 using XDA App
+1 on what he said above try connectin and disconection your phone lots of times 2 forgot it happend to me too once .sorry it was a while ago
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
bouzouki said:
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
Click to expand...
Click to collapse
As far as I know, ODIN wont recognize your phone without being in download mode and drivers installed on your computer.
bouzouki said:
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
Click to expand...
Click to collapse
No I believe you need the correct drivers installed. At this point either your missing something or don't have the correct driver to install. Maybe someone can point out where all the proper drives are for you to download
speachless ....if u wont follow what i wrote im helpless.goodbye. and why u turning your phone on dude download mode is battery out phone connected to ANY usb port hold vol up vol down hold all time and puit battery in
if that doesent help your phones usb is **** or the cable is ****
btw, i have tried installing all the proper driver from the proper threads... 32 bit, 64 bit, ive tried kies and kies mini for vibrant, heimdall drivers also.... NOTHING WORKS...
i appreciate everones help... thank you.
This is what I do to get it working. I open odin first and load all the needed files.
I then plug the usb cord into the usb first before plugging it into the phone.
with odin open and the phone completely off. I hold down the volume rocker and plug in the usb. I get download mode to work almost everytime.
For me the stock cable I got with mine doesnt work. I have to use a different cord or it acts like it doesnt see my phone.
As the title says.... I am currently running ZenDroid 2.0.1. Before flashing this as always I start off fresh by Odining back to stock then proceed with whatever rom is to my pleasing that week... I have tried using different cables. I have also tried a PC and a MAC running Parallels(VM). I also tried Hiemdall on both. All still no luck. I have googled and all I find is the suggested above. I also tried getting into download mode in all ways I know possible to see if Odin might possibly recognize it. (Holding volume buttons while plugging into PC, Up+Power button, AIO reboot into DL mode, selecting Download from power menu and even using a JIG.
If anyone else has any other suggestions or if I missed something, please LMK??
Thanks in advance for taking the time to help
Sent from my SGH-T959 using XDA App
I think what you need is:
Latest odin v1.85
Latest Samsung drivers
And another usb cable to try.
the method you use to get in download mode should not make a difference - if you're in download mode - you're in download mode.
Does your computer recognize your phone when the phone is booted up? Can you connect and transfer files, etc.? If so - your USB cable and connectors are good, and your problem is likely related to not having the drivers installed.
if you're trying this on a new computer - one you haven't ODIN'd your phone from before, make sure you have the samsung drivers installed.
If you can't even transfer files, etc. - try a new USB cable - and NOT one that came with a charger (some of those are not actually USB cables - they can only charge your phone). You can get usb-to-microusb cables for like a buck online - places like monoprice or many others.
If you REALLY did try new USB cables, make sure the USB ports are clean - both on the phone and on the computer you're trying to hook to.
Thanks for your responses.
I found the solution to my problem. I decided to start from scratch. I deleted the drivers, AIO and Heimdall. Then I plugged in the phone just to see if Windows 7 sees it as an unknown device still. It was recognized but it was asking for drivers this time. So I proceeded to install JUST the driver and magically everything was working NORMAL again!!
Im not sure what may have caused this to happen. I flash my phone every other week so I found it kind of odd when this did occur.
Oh well.. ITS FIXED!! AND I CAN FLASH AGAIN!!
Sent from my SGH-T959 using XDA App
odin doesnt detect my phone
I dont know what to do! Odin doesn't detect my phone. i have tried different usb cable , different computer. no matter what i did odin doesnt recognize my phone in download mode. what should i do? Please somebody help. What driver should i install?
I have been posting (and have had some nice people try to help) in the How to Recover Fascinate from any Brick thread for about a week and can't seem to find a solution. I have also searched the internet high and low looking for a solution with no success. Hopefully someone here has had the same issues and can point me in the right direction.
I rooted the Fascinate using a one click method and was able to get a Titanium backup but could not get into the proper recovery to do a system image. Stupidly, I flashed SP Recovery from within ROM Manager. From that moment on I when the phone is turned on it gets to the "Samsung" screen and locks.
I did my research and found out all I needed to do to fix is install ODIN and reflash the stock ROM again. The problem is that ODIN will not recognize the phone. I start ODIN, pull the phone battery, plug the phone into USB cable, push volume down to get the phone into download mode (Yellow Triangle). I keep getting USB Device Not Recognized errors from Win 7 (64-bit).
I tried installing Heimdall to load the correct drivers but it doesn't see the device either. I can connect my Droid or Droid 2 and Heimdall sees immediately so I know it is not a problem with the software or cable.
I have tried to install the correct USB drivers (even the ones listed on this site). I tried installing Kies and it doesn't see the phone either.
Since the phone is looping at the "Samsung" screen I can't change any settings in the phone as some have suggested. I really do not have any more ideas other that to use this phone as a very expensive door stop. Hopefully, someone here can help. Thanks in advance!!!
pscpa said:
I have been posting (and have had some nice people try to help) in the How to Recover Fascinate from any Brick thread for about a week and can't seem to find a solution. I have also searched the internet high and low looking for a solution with no success. Hopefully someone here has had the same issues and can point me in the right direction.
I rooted the Fascinate using a one click method and was able to get a Titanium backup but could not get into the proper recovery to do a system image. Stupidly, I flashed SP Recovery from within ROM Manager. From that moment on I when the phone is turned on it gets to the "Samsung" screen and locks.
I did my research and found out all I needed to do to fix is install ODIN and reflash the stock ROM again. The problem is that ODIN will not recognize the phone. I start ODIN, pull the phone battery, plug the phone into USB cable, push volume down to get the phone into download mode (Yellow Triangle). I keep getting USB Device Not Recognized errors from Win 7 (64-bit).
I tried installing Heimdall to load the correct drivers but it doesn't see the device either. I can connect my Droid or Droid 2 and Heimdall sees immediately so I know it is not a problem with the software or cable.
I have tried to install the correct USB drivers (even the ones listed on this site). I tried installing Kies and it doesn't see the phone either.
Since the phone is looping at the "Samsung" screen I can't change any settings in the phone as some have suggested. I really do not have any more ideas other that to use this phone as a very expensive door stop. Hopefully, someone here can help. Thanks in advance!!!
Click to expand...
Click to collapse
Control Panel/ User Account/ User Account Control settings- set to- Never notify- restart computer.
Should recognize phone. Reset to default when done and restart. Windows crap!
Thanks but this setting has always been set to "Never Notify"......any other ideas...please
I don't know nothing about it but the guy said " reset to default and restart (again)??
Sent from my SCH-I500 using xda premium
Followed the directions exactly. I think the OP wanted me to reset to default after I was done flashing. This is so strange....I figure if the people on XDA can't figure this out the phone is doomed.
Have you tried a different USB plug on the computer? Or a different USB cord? Or a different computer?
Sent from my SCH-I500 using XDA App
schu9120 said:
Have you tried a different USB plug on the computer? Or a different USB cord? Or a different computer?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I had to use a laptop to access my Fascinate because my desktop wouldnt even show it as unrecognized hardware, it was like it didnt even exist... I went in device manager and uninstalled all my usb devices, rebooted with everything but mouse/kb unplugged, installed SDK drivers for Nexus S, rebooted again (probably not needed but better safe than sorry) and I can now Odin into my phone... Hope this helps ya man... sucks bricking a phone
The Heimdall drivers won't work. Kies won't recognize it if it won't boot. There should be an option in Kies to install the driver. Drop down box in the top left corner. Did you try to install your driver that way?
have you installed the driver yet? samsung driver?
I've tried everything on this site to root and get cwm to install custom roms. I've done this with my inspire and infuse but the sgs2 is currently winning the battle.
I have the drivers installed and I know how to boot into download mode but for some reason odin will not work for me. I can't get the yellow bar to come up for me to install the pda file. I like the phone but not being able to flash roms is gonna suck.
If anyone could help that would be great. I've tried all the methods on here and no success. Thanks in advance.
Put your phone into download mode and connect to you computer, then go to to device management either through settings or by right clicking on my computer then properties.
There look through the USB devices on your computer, you should find this listed somewhere there
Code:
Samsung Mobile USB CDC Composit Device
If the driver is set up correctly.
If you can't find the above then uninstall any thing that is any kind of a Samsung mobile device, unplug your phone and uninstall and reinstall Samsung kies.
If you do find the above, unplug your phone, make sure the version of Odin you have is 1.82 or higher.
Then do the following in the exact order
1. Reboot your computer
2. Start Odin
3. Put your phone into download mode and connect to your computer - and hopefully within 10 to 15 seconds Odin should recognize your phone
Sent from my SAMSUNG-SGH-I777 using XDA App
ODIN Flash
cpbeats said:
I've tried everything on this site to root and get cwm to install custom roms. I've done this with my inspire and infuse but the sgs2 is currently winning the battle.
I have the drivers installed and I know how to boot into download mode but for some reason odin will not work for me. I can't get the yellow bar to come up for me to install the pda file. I like the phone but not being able to flash roms is gonna suck.
If anyone could help that would be great. I've tried all the methods on here and no success. Thanks in advance.
Click to expand...
Click to collapse
This should fix the problem:
Get the Samsung Unified USB driver here: http://api.viglink.com/api/click?for...13196871580881
Be sure to uninstall kies if it's installed and uninstall any other samsung usb driver.
Then reboot windows before installing the new unified samsung drivers.
After installation of the new usb drivers reboot windows before connecting the usb cable into the phone.
Plugging in the original samsung usb cable into a different usb port in the
back of the computer is also a good thing to try as Dungeon47 was saying.
Good Luck!
Make sure you are using a USB directly connected to your motherboard. Make sure you are using an official Samsung or Blackberry micro USB cable. If that doesn't help, try another port.
Ok thanks i'm still in the process of trying and doing what y'all suggested. I will let y'all know if it works.
Well I got superuser now but still unsuccessful in flashing rom.
Says installation aborted. Ill try later but thanks for helping out.
Did you try starting Odin first, and plugging your phone in afterwards? That hung me up for a little bit. (I'm assuming you reinstalled Kies as suggested).
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Yeah I got root but when I try to flash a rom I'm unsuccessful. Trial and error. Ill get it.
Hey guys,
using MIUI.us version 2.7.13 on my phone, but since my android.phone FCed all the time here on holidays I thought of going back one version. Just wanted to restore to 2.7.6.
Unfortunately I am now stuck at the yellow boot logo.
I just a USB cable to reflash the whole thing, but my phone does not connect to the laptop. I can enter the download mode and it says bright and clear "downloading... do not restart phone", but it simply just not connects with ODIN.
Is this because the cable does not support that or is something bigger the problem?
Thanks for your help!
damnation333
clean
Have you tried cleaning the micro USB port? Or a different cable?
scayre32 said:
Have you tried cleaning the micro USB port? Or a different cable?
Click to expand...
Click to collapse
Hey,
I'm in Crete. Managed to pick up that cable on the way there. My only chance for the time being. Cable is new and clean. Should work.
Anybody else an idea?
Thanks!
damnation333 said:
Hey guys,
using MIUI.us version 2.7.13 on my phone, but since my android.phone FCed all the time here on holidays I thought of going back one version. Just wanted to restore to 2.7.6.
Unfortunately I am now stuck at the yellow boot logo.
I just a USB cable to reflash the whole thing, but my phone does not connect to the laptop. I can enter the download mode and it says bright and clear "downloading... do not restart phone", but it simply just not connects with ODIN.
Is this because the cable does not support that or is something bigger the problem?
Thanks for your help!
damnation333
Click to expand...
Click to collapse
ok seems that your phone may be only soft bricked, not hard bricked, so you can easily make it work again, try to enter recovery by key combo, if you can enter recovery just wipe every thing, and then make afresh install of the rom, if you can only enter download mode, just try any other usb cabl and use another usb port in your usb, and flash stock samsung rom, and you will be fine,
btw : i don't know about miui version , is it ics or gb, and whats kernel you are using, please provide more info about rom version and the used kernel.
damnation333 said:
Hey guys,
using MIUI.us version 2.7.13 on my phone, but since my android.phone FCed all the time here on holidays I thought of going back one version. Just wanted to restore to 2.7.6.
Unfortunately I am now stuck at the yellow boot logo.
I just a USB cable to reflash the whole thing, but my phone does not connect to the laptop. I can enter the download mode and it says bright and clear "downloading... do not restart phone", but it simply just not connects with ODIN.
Is this because the cable does not support that or is something bigger the problem?
Thanks for your help!
damnation333
Click to expand...
Click to collapse
First tell me r u able to boot in cwm recovery or not.
Sent from my GT-I9100 using Tapatalk 2
Samsung specific usb drivers must be installed on PC for the download mode to work. That's your problem. Just install Kies or only the usb drivers for Samsung
Sent from my GT-I9100 using Tapatalk 2
Phil3759 said:
Samsung specific usb drivers must be installed on PC for the download mode to work. That's your problem. Just install Kies or only the usb drivers for Samsung
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I think from the OP's words it seems that he already has gs2 drivers in his PC.
Sent from my GT-I9100 using Tapatalk 2
stuck download mode
hi just a thought have you got kies installed? and also do not have it running at the same time as odin its only needed for driver support as you may or may not know.
also as previous posts suggest you haven't totally bricked your phone so should be sound to restore.
I think u had unchecked ur debugging mode....
Stuff to try when Odin doesn't work:-
*Must run Odin as administrator in Windows.
*Ensure Kies & it's processes aren't running in Windows task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google)
*Uninstall Kies, reboot, re-download & reinstall it, reboot, try the flash again. Also run Windows Update.
Sent from my GT-I9100 using Tapatalk 2
It seems Mr. OP forget to check this thread after started. So folks no need to give solutions.
Sent from my GT-I9100 using Tapatalk 2
...
Hey guys,
I had had the drivers installed. Just installed KIES aswell, but it didn't make a difference.
I can't go into CWM anymore. The only thing I can manage is the download mode, but I can't get ODIN to connect with the phone.
The cable I am using is not the original one, but a multicable (plugs for all kinds of USBs, iPhone, phones). Is it possible this is the reason?
Thanks!
Stuff to try when Odin doesn't work:-
*Must run Odin as administrator in Windows.
*Ensure Kies & it's processes aren't running in Windows task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google)
*Uninstall Kies, reboot, re-download & reinstall it, reboot, try the flash again. Also run Windows Update
Click to expand...
Click to collapse
- Odin is automatically started as admin on my PC
- KIES hadn't been installed before (but the drivers). Also installed KIES now and it is not running in the background
- tried all 3 USB ports
- only have this one cable here in Crete... can't try another yet
- will try now
- will try now
Thanks guys!
MistahBungle said:
You plagiarist ! (j/k).
Click to expand...
Click to collapse
Lol, I'm lazy, and you always give sound advice. Why fix what ain't broken, eh?
Sent from my GT-I9100 using Tapatalk 2
Hey everybody,
just got it sorted.
Bought a new cable and now ODIN can connect without trouble. What did we learn from this: never use one of those multicables for flashing etc. They won't work.
Btw my friend tried to use the same cable for his iPhone and it wasn't able to connect either to iTunes. Just charging worked!
Thank you so much for your help!