Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4THIS IS JB 4.1.2 FOR XT910TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOTKERNEL
ROM
artur0588 said:
Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4THIS IS JB 4.1.2 FOR XT910TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOTKERNEL
ROM
Click to expand...
Click to collapse
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
heblu said:
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
Click to expand...
Click to collapse
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
artur0588 said:
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
Click to expand...
Click to collapse
Great. In the next few hours I'll be back
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Any noticeable changes ?
Like my work visit my channel once on YouTube
YouTube.com/user/Therazrguy
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
hmm im installing it on rom 2, and rom 1 is JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
danieltang34 said:
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
Click to expand...
Click to collapse
You forgot flash new kernel
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
danieltang34 said:
hmm im installing it on rom 2, and rom 1 is based JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
Click to expand...
Click to collapse
first reboot to BMM recovery and flash kernel from OP. then wipe all and install rom
Lzto1320 said:
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
Click to expand...
Click to collapse
I have attached in OP
artur0588 said:
i have attached in op
Click to expand...
Click to collapse
tks so much for your work! Great man!!!
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
This is from the soak test I believe.
hansip87 said:
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Click to expand...
Click to collapse
al good
after you have backup CID and your kernel you can restore them just to be sure
you can flash rom in second system (webtop partition). To switch, reboot into BMM, flash desired kernel, reboot
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
yes
heblu said:
yes
Click to expand...
Click to collapse
i have a sily question. can we dual boot this rom and flash kernel separately becouse i donnt want to lose my stock rom ics and all apps.
one more question is there a way to backup my whole rom and restore as it is when i want .?
one question more ics will not work on jelly bean kerne.?
thanx in advance for answer my silly question
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
PatrickDziura said:
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
Click to expand...
Click to collapse
Yes, original.
Related
First i have to sorry for my poor english.
um.. i'm using H.K's MAXX. And i've already ota to HKTW 4.0.4.
And i found this rom "Epsilon Project v3", but i saw it might be use EU Fastboot to flash this rom.
Can i use Asia Fastboot to flash this rom?
keiya345 said:
First i have to sorry for my poor english.
um.. i'm using H.K's MAXX. And i've already ota to HKTW 4.0.4.
And i found this rom "Epsilon Project v3", but i saw it might be use EU Fastboot to flash this rom.
Can i use Asia Fastboot to flash this rom?
Click to expand...
Click to collapse
Yes u can. Use BootMenu to flash Epsilon as 2nd ROM.
Sent from my XT910 using Tapatalk 2
elias.parasini said:
Yes u can. Use BootMenu to flash Epsilon as 2nd ROM.
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Thx man.
If i use BootMenu to flash Epsilon as 2nd ROM, will this 2nd rom cost many space on my phone?
keiya345 said:
Thx man.
If i use BootMenu to flash Epsilon as 2nd ROM, will this 2nd rom cost many space on my phone?
Click to expand...
Click to collapse
BootMenu use your webtop partition (which is not used in ICS), so dont worry.
But I suggest you to make a backup of your webtop partition (use BootMenu too), just in case something happens.
Even u can flash it CLOCKWORK MOD.
using razr bootstrap..
Sliced by my RAZR
how do i install epsilon rom? im running 676.226.3.xt910.retai.en.eu.
elias.parasini said:
BootMenu use your webtop partition (which is not used in ICS), so dont worry.
But I suggest you to make a backup of your webtop partition (use BootMenu too), just in case something happens.
Click to expand...
Click to collapse
thx again!
may be I can handle it:good:
vikcie said:
Even u can flash it CLOCKWORK MOD.
using razr bootstrap..
Sliced by my RAZR
Click to expand...
Click to collapse
OK! I will try it!:good::good:
Stock ROM 982.124.14.XT910.Retail.en.EU for BMM 0.3.4
THIS IS JB 4.1.2 FOR XT910 Flashable Zip (WITH ROOT)TO INSTALL THIS ROM YOU NEED TO FLASH NEW EMEA JB 4.1.2 KERNEL FIRSTMAKE SURE TO BACKUP YOUR CID AND CLEAR IT BEFORE BOOT IF YOUR PHONE IS NOT FROM EMEA REGION
To flash Kernel you can install this zip package via "install zip" in BMM 0.3.4.
Or to flash this Kernel via "firmware flashing" in BMM 0.3.4.
ROM is installed via "install zip" in BMM 0.3.4.
The ROM is full stock and Rooted. Just install SuperUser after boot.
It was made using new technology applying OTA update to ICS stock rom on PC.
Deleted
perfect!:good:
Hi! It's deodexed?
Thanks!!
Anyone verified as working?
How do I flash a new kernel?
And how do I backup my CID?
guibovo said:
How do I flash a new kernel?
And how do I backup my CID?
Click to expand...
Click to collapse
These are features of BMM recovery.
It can do both things you need.
guibovo said:
How do I flash a new kernel?
And how do I backup my CID?
Click to expand...
Click to collapse
Both are done using BMM, but if you did not know that i suggest you read a lot before you try anything.
Sent from my RAZR using Tapatalk
Do you recomend me any post/tutorial to read?
Hey everyone, if interested, go here to use the Black styled Holo Contacts.apk + True Carrierless Status Bar when collapsed
http://forum.xda-developers.com/show...post&t=2204659
Hope this works flawlessly to all ROM based on the same number
And a New Camera with enabled ISO setting is up too, Go here http://forum.xda-developers.com/show....php?t=2206206
Nandeh said:
Hi! It's deodexed?Thanks!!
Click to expand...
Click to collapse
No, it is stock.
maarawoe said:
Anyone verified as working?
Click to expand...
Click to collapse
My XT910 is running this ROM
Al936 said:
My XT910 is running this ROM
Click to expand...
Click to collapse
Sure but don't take me bad but I'd rather have confirmation from some know dev around here before I flash a rom from an uknown source
But thanks for the rom anyway!
Good point, mate Pls read PM
Can anyone give me link of a fastboot file of this JB release?
^^ I believe only the xt912 JB fastboot files are available for now.
http://sbf.droid-developers.org/
The Sensei said:
Can anyone give me link of a fastboot file of this JB release?
Click to expand...
Click to collapse
its not out yet
Sh*t. I forgot to remove my CID during the procedure, now mine's bricked. I'm triying to save my skin through RSD, but it can't recognize my device! Any suggestions?
Edit: Just saw that the endline is:
invalid cg hab (cg: boot, status: 0x0056)
Maybe the error is due to the JB kernel flashed over mine.
Edit2: Solved: Reflashed stock ICS kernel. Tomorrow I'll be creating a new thread teaching how to.
fredamsouza said:
Sh*t. I forgot to remove my CID during the procedure, now mine's bricked. I'm triying to save my skin through RSD, but it can't recognize my device! Any suggestions?
Edit: Just saw that the endline is:
invalid cg hab (cg: boot, status: 0x0056)
Maybe the error is due to the JB kernel flashed over mine.
Edit2: Solved: Reflashed stock ICS kernel. Tomorrow I'll be creating a new thread teaching how to.
Click to expand...
Click to collapse
I believed till today that before teaching you need learning ...
and trial and error it's not the right way for knowledge!
---------- Post added at 04:58 PM ---------- Previous post was at 04:54 PM ----------
maarawoe said:
Anyone verified as working?
Click to expand...
Click to collapse
I did it and MD summed and compared file by file the OTA with this one and it's a PERFECT MATCH!
working great even with bmm
triplex76 said:
I believed till today that before teaching you need learning ...
and trial and error it's not the right way for knowledge!
Click to expand...
Click to collapse
I agree with you. But my point is that when I needed I couldn't find any information about it.
I know what went wrong in my try and I couldn't find anything when I needed to. My solution was an use of another tutorial to unbrick the phone on another case that I could apply here. I had to change the imgs to mine in this thread. But I had to download almost 500MB just to use 1MB of the package...
I think that there could be more people with the same problem needing this same solution, so why not contribute?
I have a MyPhone A888 and it is version 4.0.4. My question is, can I install a custom rom that is 4.1.2? I was planning on installing this (Yonip A888 4.1.2 V5): http://forum.frandroid.com/topic/142780-rom-yonip-a888-412-v5-28042013/, which I found on this list of A888 roms: http://forum.xda-developers.com/showthread.php?p=41729090. So can I install it? Or should I stick to 4.0.4 custom roms? Thanks!
Likach said:
I have a MyPhone A888 and it is version 4.0.4. My question is, can I install a custom rom that is 4.1.2? I was planning on installing this (Yonip A888 4.1.2 V5): http://forum.frandroid.com/topic/142780-rom-yonip-a888-412-v5-28042013/, which I found on this list of A888 roms: http://forum.xda-developers.com/showthread.php?p=41729090. So can I install it? Or should I stick to 4.0.4 custom roms? Thanks!
Click to expand...
Click to collapse
watch the instrction
shiva4849 said:
watch the instrction
Click to expand...
Click to collapse
Huh? So can I or can I not? Sorry I am a complete noob
Likach said:
Huh? So can I or can I not? Sorry I am a complete noob
Click to expand...
Click to collapse
You can install any rom of any version you want but it MUST be for your exact device.
TenKoX said:
You can install any rom of any version you want but it MUST be for your exact device.
Click to expand...
Click to collapse
Oh okay. So just to be extra clear, I can install a 4.1.2 Rom on my 4.0.4 phone right?
Likach said:
Oh okay. So just to be extra clear, I can install a 4.1.2 Rom on my 4.0.4 phone right?
Click to expand...
Click to collapse
Yes. The version doesn't matter. You can be sure to install a ROM for YOUR device (if not you can get a hard-brick and this is not good...).
Remember to do FULL WIPE when you change version.
Any other doubts just tell me
TenKoX said:
Yes. The version doesn't matter. You can be sure to install a ROM for YOUR device (if not you can get a hard-brick and this is not good...).
Remember to do FULL WIPE when you change version.
Any other doubts just tell me
Click to expand...
Click to collapse
Thanks! Gonna start installing now.
When I go to install the rom JELLYWIZ or WIZZEDBEAN after I do Riboot Pelephone he restarts again and again What to do??
jellywiz: http://forum.xda-developers.com/showthread.php?t=2133763
I gave :crying:
ravidromy said:
When I go to install the rom JELLYWIZ or WIZZEDBEAN after I do Riboot Pelephone he restarts again and again What to do??
jellywiz: http://forum.xda-developers.com/showthread.php?t=2133763
I gave :crying:
Click to expand...
Click to collapse
Were you on "THE VERIZON (USA) JB CHRISTMAS LEAK KERNEL(either through dualboot or the leak)" before trying to install ?
Horgun said:
Were you on "THE VERIZON (USA) JB CHRISTMAS LEAK KERNEL(either through dualboot or the leak)" before trying to install ?
Click to expand...
Click to collapse
Can you help me install the rum just tell me what to do what it is and what it dualboot section if the verision tell me what to do all over again because I'm getting into
ravidromy said:
Can you help me install the rum just tell me what to do what it is and what it dualboot section if the verision tell me what to do all over again because I'm getting into
Click to expand...
Click to collapse
Are you using Safestrap 3.11 ? I'm not sure but i think dualboot is referring to: Leaving the Stock ROM intact and installing the other ROM on the other slots.
So, what model is your phone ? What is your current stock version ? If it's not the Christmas Leak one, you'll want to see this:
http://forum.xda-developers.com/showthread.php?t=2213740
Horgun said:
Are you using Safestrap 3.11 ? I'm not sure but i think dualboot is referring to: Leaving the Stock ROM intact and installing the other ROM on the other slots.
So, what model is your phone ? What is your current stock version ? If it's not the Christmas Leak one, you'll want to see this:
http://forum.xda-developers.com/showthread.php?t=2213740
Click to expand...
Click to collapse
Should install what you brought me?
Then install the rom?
My system version is: 982.124.14.xt910.vodafone.en.EU
My device was bought from Israel means he GSM.
i gave !!!!
I'm dying to install this rom.
ravidromy said:
Should install what you brought me?
Then install the rom?
My system version is: 982.124.14.xt910.vodafone.en.EU
My device was bought from Israel means he GSM.
i gave !!!!
I'm dying to install this rom.
Click to expand...
Click to collapse
Hi, i think i got it: http://forum.xda-developers.com/showthread.php?p=44067786
You install the ROM and then flash "Patch From 98.72.8-16 CDMA to 982.124.14-17 GSM"
Horgun said:
Hi, i think i got it: http://forum.xda-developers.com/showthread.php?p=44067786
You install the ROM and then flash "Patch From 98.72.8-16 CDMA to 982.124.14-17 GSM"
Click to expand...
Click to collapse
First install the rom JELLYWIZ and then this thing and then do Riboot?
ravidromy said:
First install the rom JELLYWIZ and then this thing and then do Riboot?
Click to expand...
Click to collapse
Yeah. But i'm only saying what i think will work based on these threads i read. I'm not sure of anything ok ?
Horgun said:
Yeah. But i'm only saying what i think will work based on these threads i read. I'm not sure of anything ok ?
Click to expand...
Click to collapse
There is much work Thank you very much. Help a lot
Here's a stock rooted 4.4.4/XNPH30O ROM(8/11(2nd OTA) build). Includes root and the rest is untouched, so it's OTA safe. For those that want a deodexed system, just flash the zip below and yes, the ROM will still be ART compatible.
Also if you haven't already, flash the updated radio files, etc that was included in the XNPH30O OTA below
Stock Rooted 4.4.4/XNPH30O ROM (v1.1)
md5 - f4c6c21df09089c2a9f29472c455642d
XNPH30O Radio files, etc
md5 - 2e4a53ce591f8bfea71677e7c31449dd
Much appreciated as always.
Safe to flash over existing stock, rooted, non-deodexed ROM after wiping caches?
cosine83 said:
Safe to flash over existing stock, rooted, non-deodexed ROM after wiping caches?
Click to expand...
Click to collapse
Yes and wiping caches is not necessary as the zip does that already
Calkulin said:
Yes and wiping caches is not necessary as the zip does that already
Click to expand...
Click to collapse
Sweet! Thanks!
Hello,
I have installed a custom ROM (gummy). So if I want to install this one what I have to install?
Only the ROM with Full Wipe? Or the radio...too?
And what's the .zip of 177 KB?
Thank you!
mantff said:
Hello,
I have installed a custom ROM (gummy). So if I want to install this one what I have to install?
Only the ROM with Full Wipe? Or the radio...too?
And what's the .zip of 177 KB?
Thank you!
Click to expand...
Click to collapse
If you want to flash the rom, make a backup and do a full wipe [everything except internal storage. You can flash the radio / extras zip if you want them.
Isn't the 30O radio the same? I compared it, the radio I got was
MPSS.DI.2.0.1.c7-00020-M8974AAAAANPZM-1
which is the same as 25R
Is the extras zip just the radio or does it include other extras
zephiK said:
Isn't the 30O radio the same? I compared it, the radio I got was
MPSS.DI.2.0.1.c7-00020-M8974AAAAANPZM-1
which is the same as 25R
Click to expand...
Click to collapse
Great question. I side loaded 300 and my baseband is the Same as zephik
Curious about the Extras as well. Includes the Radio and what else?
By the way, i love you. Thanks.
there was also an incremental update that came out. Just curious as to will you be putting this one together as well
Right after flashing this another ota immediately came. Were there two updates today?
This was the only version that didn't end in a bootloop for me and the incremental update after went just fine. I just had to reroot but no biggy. . Being odex or deodex didn't matter to me. Thank you so much!
Jesus Christ, thank you so much for this! It was getting extremely frustrating to wait for an infinite boot screen to finish.
LiquidSolstice said:
Jesus Christ, thank you so much for this! It was getting extremely frustrating to wait for an infinite boot screen to finish.
Click to expand...
Click to collapse
itwin504 said:
This was the only version that didn't end in a bootloop for me and the incremental update after went just fine. I just had to reroot but no biggy. . Being odex or deodex didn't matter to me. Thank you so much!
Click to expand...
Click to collapse
I was in the same boat as both these gentlemen. Definitely many thanks.
Shaquiel Harris said:
Right after flashing this another ota immediately came. Were there two updates today?
Click to expand...
Click to collapse
Yes two updates today.
Hmm lost root flashing back to this
Sent from my A0001 using Tapatalk
Can't update the 2nd OTA as I flashed the first OTA using modified script. So now I'll have to wait for someone to modify the 2nd OTA
Nevermind, did it myself lol
vng10 said:
Hmm lost root flashing back to this
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
...so? Flash TWRP from Fastboot, and then flash SuperSu from TWRP.
Problem solved.