[Q] Rezound in Trouble. Please help. - HTC Rezound

Let me start off by saying that I'm a complete idiot and wasn't being very careful.
I have several problems with my Rezound right now and I'll try to be clear and concise. My internal SD card won't mount in the recovery menu, nor HBOOT, therefore I cannot flash PH98img.zip in HBOOT. My external SD will mount, but I'm not sure if the PH98img.zip will work from the external SD because it doesn't show up in HBOOT. My HBOOT reads as follows:
*** UNLOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.10.00000
eMMC-boot
OCT 5 2011,21:18:48
And also, here's a weird thing: My phone will show up in adb devices only when the phone is off or when I'm in the Recovery menu. My phone won't appear in adb devices when I'm in HBOOT menu. I'm running ClockworkMod Recovery v6.0.2.3.
I have tried using a few different ROMs to no avail. I think my main problem as of now is that I cannot access my internal SD card. Before I install a ROM I wipe everything I can think to wipe, cache, dalvik cache, factory reset. Some of the ROMs have the Aroma installer where it asks if I want to wipe on those and I say yes every time. I cannot start my phone because I'm stuck on HTC white screen whenever I try to boot the phone. I've tried using the Old_Firmware_Patch.zip and the GB Firmware Patch.zip. I have had no luck so far. Again, I'm sorry that I'm not exactly sure what I'm doing and I need a bit of help. Thank you and I appreciate any help that you can give.

Additional Information
Prior to this complete failure in my phone I was using an early leak of ICS, one of Newts ROMs. His ROM didn't support 4G and had trouble with a few other things including stock wifi settings. Every time I tried to go to wifi settings the "com.settings.htc" or some such process would crash. So I wanted to update to a newer ICS ROM that hopefully supported 4G and didn't have problems with wifi settings. I thought it would be as simple as loading a ROM onto the external SD and loading it from recovery, but it wasn't that easy. Because I'm S-ON I apparently missed a few steps and forgot that I have to flash PH98img.zip. But now that I cannot access my internal SD card, I cannot flash PH98img.zip as far as I know.

First thing you want to do is get off of Clockwork Mod recovery. It doesn't play well with the Rezound. Go grab Amon Ra and flash v3.16.
Secondly, you can flash a PH98IMG file off the external sd, providing you can read it of course.
I think you are still on GB firmware based on your hboot, not completely sure about that. But it's def an old hboot.
So actually, I would run the RUU and update all your firmware, don't bother flashing Amon Ra first, do that after the RUU. Find it here:
http://androidfiles.org/ruu/?dir=Vigor
Top one, 3.14.605.12. Then after you run that, you can check for and accept the latest OTA that came out a couple weeks ago and then you'll be up to date with the official updates.
You'll need to relock the phone before running the RUU
fastboot oem lock
And save everything you need from the phone first since this will wipe everything and get you back to factory stock.
Then to run the RUU attach the phone to your pc and double click on the exe RUU file. It will do it's thing. Or you can use the following commands in fastboot to get it going:
fastboot oem rebootRUU
fastboot flash zip NameOfZip.zip
Make sure you let it go all the way through. I ran the global RUU and the screen went black for a while then it goes back to finishing up, so if that happens just let it keep going. I think you end up in bootloader when it's done, and it'll ask you if you want to reboot. You should go ahead and boot up and make sure it's working okay.
After you run the RUU you will need to unlock again. Then flash Amon Ra, flash superSU for root (though I think you can just get root via Amon Ra again now) and make a nandroid of stock so you can always go back to this when you run into trouble, then flash a custom ROM if you choose.
That should sort everything out since like I said, it'll be a clean start and you'll get everything updated.
Oh, and the PH98IMG.zip file you have to flash because of being s-on is the kernel for the ROM you are flashing. So know that each PH98IMG.zip file is not the same as the other, the ROM makes the one you need using the kernel that is specifically for that ROM. So you'll either need to pull it out of the ROM and flash via fastboot, download the separate PH98IMG file if there is one in the ROM's thread, or the ROM may make one during the flash and leave the PH98IMG file on your SD card in which case you go to bootloader and accept the update, which will be the kernel.
If you don't flash the kernel then the phone won't boot, it'll just get stuck.
One last thing, I would grab CleanWipe from the Dev section and use that for wiping whenever you change ROMs. It'll really get the job done.

Back to stock now
You, feralicious, are a beautiful person for replying so detailed lol. I got my phone to start up gladly. I just now read your post. Earlier I got it working by following a thread which basically said exactly what you said: relock using fastboot oem lock and then do the lastest RUU. It was a thing of beauty. I as so lost prior to that.
It's good to know that each PH98IMG.zip is different per rom. I had no idea. I'm going to stay stock for a while. It's just nice to finally see that 4g up on the top of my phone after having dealt with 3g only for like 6 months. I'll definitely come back to this site if I have an trouble while attempting to re-root the phone. Thanks so much for your excellent reply.

Related

HTC white screen

Hi! Running into some trouble. I would have posted this in the development area but I am not allowed to until I have 10 posts. I went through the process of unlocking then rooting using amon ra, but thats the last thing I did right. I was in recovery and made the mistake of thinking I could restore an old nandriod, which happened to be from my bionic. Well now I am stuck at the HTC white screen and cannot get anywhere. I downloaded the all on one kit and successfully booted into recovery using it, but even after doing a full wipe I cannot get anywhere. I am new to HTC and with a moto device I would have just sbf'd back but I dont know what to do at this point. Any and all help would be appreciated, thanks!
What did you try to restore and dis you install re install the kernel for it
sent from ics land
I tried to restore a nandroid backup which is what I am guess caused the issue. I am new to HTC and its process, so I am unaware what you are asking by kernal. I unlocked the phone and installed amon ra 3.14 and that was it. Once it was installed I went into recovery and tried the backup, which I am now regretting. Sorry, completely new to this process, thank you very much for your patients
Just download a new ROM in the development thread.
Okay, thought that may fix so I have been downloading one, just hasnt finished yet. Once completed, do I just move it to my SD card, pop it into my phone, boot into recovery and load the zip? Never done it before, just want to fact check.
Is it an ICS or GB ROM?
It is one of the ICS roms....sigh, lol, guess that complicates things. Well, since I have already gone this far, should I go ahead and just relock, load new leaked RUU then unlock and load ICS rom OR forget that, download a GB rom and just flash it?
No you're good with downloading an ICS ROM. Did you also download the PH98IMG that goes with it?
I downloaded earlier when trying to root with Amon Ra and and got a message that it was out of date, so I thought it PH98IMG was Amon Ra from what I read in the forums and downloaded the new 3.14 and loaded that. Was I mistaken? If so, what is PH98IMG? There is a wealth of knowledge on this site, just really hard to piece it all together, lol, thank you again for your patience.
I was confused at first on what it was, too. I may not be 100% on this but it's essentially the kernel for the ROM. Since we don't have s-off we have to manually flash kernels in HBOOT instead of just flashing them in recovery.
What you wanna do is rename whatever the kernel is to just PH98IMG(it usually has it already in the name). Delete whatever comes after it. So it will say PH98IMG.zip afterwards. Then what you'll wanna do is put it in the root of your sd card. That means don't place it in any folder.
Flash the ROM first in recovery then go into HBOOT and it will read the PH98IMG.zip and prompt whether you want to update or not. Hit volume UP to update and then reboot and you should be good.
Also, make sure you delete the PH98IMG.zip from your SD card before going back into HBOOT again because it will keep asking you if you want to update it. This will prevent you from getting into Recovery from the Bootloader and if you ever get stuck in a bootloop, like you just did. The only way to get back into recovery would be to remove SD card and connect it to another phone or Computer and delete it that way.
Woah, excellent, just want I needed, some simple breakdown of everything. Once last favor, I searched for the PH98IMG(cant remember where i got it earlier) and there are alot of items named the same thing. Can you point me in the right direction of the one I need?
Which ROM are you trying to flash?
CleanRom 4.0
Well, actually you will need to relock and download the RUU if you want to use that ROM.
ok, downloading the RUU now and have the Rom downloading as well, once they are finished I would relock, load the RUU, unlock then load the new Rom right?
Yes that is it. While running the RUU follow the directions from Scott to the T. He has them posted in the first post, or at least a link to his directions.

[Q] Trying to go back to stock... having problem after problem...

Im currently trying to go back to the stock RUU from Scotts Cleanrom 4.0 however im having issue after issue.
My first issue is In this current version of cleanrom i can not access phone storage / sd storage to transfer the RUU to my phone.
The .exe verion of the RUU keeps failing and saying "unknown error, which im guessing is because my bootloader is unlocked. If I lock my bootloader, it doesnt allow my phone to boot into cleanrom, it just keeps saying under relocked "Security Warning".
Im literally lost, as scotts cleanrom 4.0 keeps rebooting and is unusable for me, and I can not use amen ra to flash a new rom because i can not copy a new rom to my phone/sd card. Furthermore, there are no nandroid backups for me to access.
My current state is this: i am "Relocked" But under it im getting "Security Warning"
I have the RUU on the SD Card but when i go into hboot, the loading bar on the top right completes then nothing happens...
You can mount your sdcard within amonRA. It's the "USB-MS toggle" and mount sdcard option.
You can also use a usb sdcard reader and pop in your sdcard.
The "USB-MS toggle" worked for me in the past.
Droidel said:
You can mount your sdcard within amonRA. It's the "USB-MS toggle" and mount sdcard option.
You can also use a usb sdcard reader and pop in your sdcard.
The "USB-MS toggle" worked for me in the past.
Click to expand...
Click to collapse
Ran to walmart to grab an adapter and i was able to get a different rom on my sd card using a reader. Currently waiting for it to boot up Ineffabilis v1.3, we'll see if this can clear up my issues since putting the RUU PH98IMG on the sd card and jumping into the bootloader didnt seem to install. Its taking its sweet time though :-/
Having bad luck with my Rezound so far, partially because i was rushing but partially because it seems like it just doesnt WANT to work, lol
Edit:
Wouldnt boot into that rom... going to try scott's stock rooted rom... if that doesnt work im gonna be back at step one
Ok so the short of it is, you can't run an older RUU. The hboot was updated with the leaked RUU, so any older RUU will fail. That is the bad news.
The good news is that you can still go back to stock, somewhat. Grab a stock rom from www.scottsroms.com, and install that.
What you need to do first is reunlock your phone.
Code:
fastboot flash unlocktoken Unlock_code.bin
This is if you still have your unlock token from htcdev.com. If not you need to rerun the process.
Secondly, reflash Amon Ra for recovery.
Code:
fastboot flash recovery nameofrecoveryfile.img
Flash the stock rom from Scott's site.
Lastly flash this zip in recovery, and you should be good to go.
EmerikL said:
Ok so the short of it is, you can't run an older RUU. The hboot was updated with the leaked RUU, so any older RUU will fail. That is the bad news.
The good news is that you can still go back to stock, somewhat. Grab a stock rom from www.scottsroms.com, and install that.
What you need to do first is reunlock your phone.
Code:
fastboot flash unlocktoken Unlock_code.bin
This is if you still have your unlock token from htcdev.com. If not you need to rerun the process.
Secondly, reflash Amon Ra for recovery.
Code:
fastboot flash recovery nameofrecoveryfile.img
Flash the stock rom from Scott's site.
Lastly flash this zip in recovery, and you should be good to go.
Click to expand...
Click to collapse
Second time you helped me out of a hole today, you ARE the man. Thank you so much
And in fact, I would much rather be on one of Scott's stable stock like roms with that vzw bloat removed.
Edit:
Got scotts stock rom working nicely except i still cant access my sd card or internal storage. i flashed The Zip you linked and it still is not working. Any ideas?
question:
once somebody is rooted and flashed with a ROM from xda, is there anyway to go back to the original stock (not Scott's) so the Rezound can get the official OTA update to ICS on its own?
cpham817 said:
question:
once somebody is rooted and flashed with a ROM from xda, is there anyway to go back to the original stock (not Scott's) so the Rezound can get the official OTA update to ICS on its own?
Click to expand...
Click to collapse
Depends on the rom, if you updated to one of the newer ICS roms that require updating the firmware, no. The current roms will be updated with the goods from the latest OTA once it's available though so you just install the latest version of the rom of your choice.
Now if there's any more radio/hboot/baseband type updates, we'd have to manually go through the process of installing the latest RUU to update those also.
i haven't updated the firmware yet, i was actually thinking of doing so tonight. I'm not trying to unroot, i would rather just get the ota update. the rom I've been using has started being buggy and there doesn't seem to be a fix (random restarting several times a day, lost connection issues, etc). what would i have to do?

[Q] Stuck in boot loop -- typical fix not working

Alright, so I've got an S-On rooted Rezound and I'm stuck in the boot loop. YES I've read all the posts about logging in and dialing *#etc and also to go into Mobile Network and switch to LTE/CDMA, but I can't dial anything because the phone cuts off before I get a chance, and the LTE switch does nothing. I've tried flashing several different kernels, using the adb method and the PH98IMG methods, I've tried installing several different ROMS, I've done at least 10 different wipes/factory resets, I boot my phone without the cover, SIM card and without the SD card..and I'm still stuck in this boot loop. Someone please help a noob
---- EDIT WITH SOLUTION ----
Here's my "solution" to this issue. I'm sure it's located somewhere in these forums, but I couldn't find it so I imagine others can't either. Essentially, you're going to have to S-Off. Here's the solution:
I believe my recovery started acting funny after I failed to S-Off properly the first time. Amon Ra was all gimmicky and said stuff like "E: can't find cache" and reinstalling the recovery/wiping everything (and I mean everything: external SD, internal SD, cache, partioning SD card etc..) wasn't working. I tried re-installing Amon Ra through command prompt with the adb, I tried reinstalling my ROMS but my phone wasn't having it.
It got to the point all I could boot into was a white HTC screen, so I then tried out Twrp's 2.1 Touchscreen (I wasn't S-Off yet) recovery (I don't have enough posts to post a link yet ) which INITIALLY reported the same "E: can't find cache" errors as Amon Ra, BUT when I wiped my files in Twrp it seemed to actually fix them...I'm not sure exactly what I wiped or formatted that fixed the "E: can't find mount/cache" issues, so try everything.
So my ROM installed but I was still stuck on the white HTC logo. This is where I INSTALLED A NEW KERNEL THROUGH ADB. I wish I knew which kernel I installed, but I have like 10 and I just picked a random one. The point is if you're still stuck at a white HTC screen, install a new kernel.
So I got a recovery on the phone, and then I tried to S-Off again but I didn't have a good ROM installation so that was hanging at the HTC white screen. I then installed CleanROM DE 1.4 and I was able to boot into it, but ran into my initial problem of it crashing after dialing a number and entering infinite reboot. However, it would stay on just long enough for me to run ControlBear's program to S-Off.
So I S-Offed, I downloaded the Gingerbread RUU (the .exe version for Windows), I installed it, and now I can dial numbers and I'm all goodie again. Unfortunately, I honestly think the only way I was escaping my trouble was doing an S-Off, unless they leak a Ice Cream Sanwhich executable for Windows.
TL;DR Install Twerp 2.1 through adb, wipe everything, install CleanROM DE 1.4, install kernel S-Off, run Gingerbread RUU .exe
autotuneuser said:
Alright, so I've got an S-On rooted Rezound and I'm stuck in the boot loop. YES I've read all the posts about logging in and dialing *#etc and also to go into Mobile Network and switch to LTE/CDMA, but I can't dial anything because the phone cuts off before I get a chance, and the LTE switch does nothing. I've tried flashing several different kernels, using the adb method and the P87etc methods, I've tried installing several different ROMS, I've done at least 10 different wipes/factory resets, I boot my phone without the cover, SIM card and without the SD card..and I'm still stuck in this boot loop. Someone please help a noob
Click to expand...
Click to collapse
Have you tried running a RUU to put it back to factory like you just bought it?
I can't tell you how many times I've had to do that to fix stuff.
Magestic12 said:
Have you tried running a RUU to put it back to factory like you just bought it?
I can't tell you how many times I've had to do that to fix stuff.
Click to expand...
Click to collapse
I think I have downloaded the stock RUU..but just to be sure could you possibly link me to the correct one to run? Also I thought it was impossible to go back down from Ice Cream Sandwhich to Gingerbread?
autotuneuser said:
I think I have downloaded the stock RUU..but just to be sure could you possibly link me to the correct one to run? Also I thought it was impossible to go back down from Ice Cream Sandwhich to Gingerbread?
Click to expand...
Click to collapse
It is if you're s-on. Also, what did you mean by "P87etc," are you flashing the files properly?
autotuneuser said:
I think I have downloaded the stock RUU..but just to be sure could you possibly link me to the correct one to run? Also I thought it was impossible to go back down from Ice Cream Sandwhich to Gingerbread?
Click to expand...
Click to collapse
People say a lot of things are impossible, most have the virtue of never being tried.
This is the one I used to fix mine when I screwed up the partitions on my phone. I will warn you, the link in the thread takes you to another site & you have to sign up to download it. Its completely free & legit, but it won't let you download unless you register which is STUPID!
http://forum.xda-developers.com/showthread.php?p=25664508
Let me know if that helps
Oh & BTW I was & still am on the ICS leaks when I did this, so you'll be fine. You will lose everything on your phone though, because it wipes everything. But if you can't use it, that's not really an issue I guess.
tekhna said:
It is if you're s-on. Also, what did you mean by "P87etc," are you flashing the files properly?
Click to expand...
Click to collapse
The PH98IMG file. And I believe I'm flashing the properly..I do it twice; flashboot in adb, it tells me success, I then flash again right there, and then I reboot back to the bootloader and flash again so I do it 3 times in total.
I'm downloading the Vigor executable now. It's going to take a while but I'll report back with my results.
autotuneuser said:
The PH98IMG file. And I believe I'm flashing the properly..I do it twice; flashboot in adb, it tells me success, I then flash again right there, and then I reboot back to the bootloader and flash again so I do it 3 times in total.
I'm downloading the Vigor executable now. It's going to take a while but I'll report back with my results.
Click to expand...
Click to collapse
PH98IMG is not going to help you in this situation. You are going to have to download & run the RUU that I linked in the previous post. Trust me on this, not only have I already tried that before, I've blown my phone up enough times to know.
Magestic12 said:
PH98IMG is not going to help you in this situation. You are going to have to download & run the RUU that I linked in the previous post. Trust me on this, not only have I already tried that before, I've blown my phone up enough times to know.
Click to expand...
Click to collapse
Ok, I went to use the RUU and at first I got error 150, so I read somewhere I should lock my bootloader, so I relocked and now I get error 140, whcih is bootloader verision error. I think that's because I'm on ICS with S-On right? Is there any ICS RUU I can use to restore my phone? I downloaded Vigor_Stock_Doedexed_3.14.605.5 before but it still wasn't working for me.
autotuneuser said:
Ok, I went to use the RUU and at first I got error 150, so I read somewhere I should lock my bootloader, so I relocked and now I get error 140, whcih is bootloader verision error. I think that's because I'm on ICS with S-On right? Is there any ICS RUU I can use to restore my phone? I downloaded Vigor_Stock_Doedexed_3.14.605.5 before but it still wasn't working for me.
Click to expand...
Click to collapse
And as far as this goes yeah you can't use the .exe if your on ICS firmware with s-on and there are no available .exe's for ICS
Sent from my ADR6425LVW using Tapatalk 2
Unless you are already on the gingerbread build, and it sounds like your not, if you are s-on, it simply will not work. My suggestion is to download the latest leak and that should get you going. If it were me, and I aleady did it, download the latest leak here: http://android.thesmallprint.org/ICS.LEAK.3.14.605.5_PH98IMG.zip. Rename it PH98IMG.zip and put it on your external sd card. Should take less than 10 mins to download. Reboot into bootloader and let hboot install it. Make sure you are locked or relocked. After that is installed either delete or change the name of that file. Reboot into bootloader, unlock, and install either amon ra or tpwr and you can reinstall that rooted rom.
what he said
mikey's comments just previous are totally right, but after install, i would recommend
a factory reset, maybe even twice.
your bootloop problem should be cured then...
I was on the latest ICS firmware running an ICS ROM when I had to run the RUU I gave the link for & it worked fine for me.
Here's my suggestion & you can take it for what its worth.
I would download the latest HBoot & Radios & flash them.
Then if you can get into recovery, wipe everything, manually wipe the system, boot, etc. Then after that try running the RUU.
I just did this earlier in the week & it worked fine & my phone was all screwed up because the partitions were mounting to the wrong places & just all messed up.
I am by no means a dev or an expert, I'm just telling you what I did.
WHATEVER YOU CHOSE, YOU DO AT YOUR OWN RISK, but I don't see where you really have a choice.
Let me know if I can be of anymore help as I know what its like to have a phone that's freaking out on you. You can PM me or post here which ever you prefer. If after that we still can't get it fixed, we'll go find a dev to help us.
mikeyk101 said:
Unless you are already on the gingerbread build, and it sounds like your not, if you are s-on, it simply will not work. My suggestion is to download the latest leak and that should get you going. If it were me, and I aleady did it, download the latest leak here: . Rename it PH98IMG.zip and put it on your external sd card. Should take less than 10 mins to download. Reboot into bootloader and let hboot install it. Make sure you are locked or relocked. After that is installed either delete or change the name of that file. Reboot into bootloader, unlock, and install either amon ra or tpwr and you can reinstall that rooted rom.
Click to expand...
Click to collapse
Well now my recovery is saying it can't mount various things like "E: can't mount b dev/block/ blah blah"
And I tried flashing my ROM through Amon recovery but it's saying it can't open the file because it's (bad). I formatted the SD card and I'm still getting the issue. Any ideas?
Did you download the one from the link? You don't flash that PH98IMG.zip in recovery, you boot up into bootloader and let hboot find it. If when you get to your bootloader and it is fastboot, use your volume key and select on bootloader option. Then hboot will find it and ask you if you want to install it. Install it. After that, you will then need to reinstall either amon ra or the other but stay away from clockworkmod. But to reinstall the recovery, you will have to unlock again.
mikeyk101 said:
Did you download the one from the link? You don't flash that PH98IMG.zip in recovery, you boot up into bootloader and let hboot find it. If when you get to your bootloader and it is fastboot, use your volume key and select on bootloader option. Then hboot will find it and ask you if you want to install it. Install it. After that, you will then need to reinstall either amon ra or the other but stay away from clockworkmod. But to reinstall the recovery, you will have to unlock again.
Click to expand...
Click to collapse
I did install in hboot. I then installed Amon so I could flash the ROM and that's what's giving me all those errors.
If all you are after is stock and rooted, try looking at this one: http://forum.xda-developers.com/showthread.php?t=1642217
Since you ran the PH98IMG that I directed you to, you are now on ICS. So follow the directions in that thread for "S-On and ICS".
Installation for S-ON Devices on ICS firmware
•Copy ROM to SD Card AND PH98IMG.zip to ROOT of SD Card
•Reboot to recovery
•wipe data / Factory Reset
•Flash ROM
•Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
•Reboot
•Profit!
Edit: The only change I would recommend is to hold off putting that PH98IMG file from that thread on the sd card right away. You will have a hard time getting to recovery if you have that on the card. I would suggest following all the instructions up to and including "Flash ROM". Then I would "return" back to the main Amon Ra screen, make sure you have the data cable connecting your phone to the computer, select "USB-MS Toggle", then select the SD Card, and that will allow you to copy the PH98IMG file to the SD card. Then continue with the rest of the directions. If you do this right, you should be ok.
mikeyk101 said:
If all you are after is stock and rooted, try looking at this one: http://forum.xda-developers.com/showthread.php?t=1642217
Since you ran the PH98IMG that I directed you to, you are now on ICS. So follow the directions in that thread for "S-On and ICS".
Installation for S-ON Devices on ICS firmware
•Copy ROM to SD Card AND PH98IMG.zip to ROOT of SD Card
•Reboot to recovery
•wipe data / Factory Reset
•Flash ROM
•Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
•Reboot
•Profit!
Edit: The only change I would recommend is to hold off putting that PH98IMG file from that thread on the sd card right away. You will have a hard time getting to recovery if you have that on the card. I would suggest following all the instructions up to and including "Flash ROM". Then I would "return" back to the main Amon Ra screen, make sure you have the data cable connecting your phone to the computer, select "USB-MS Toggle", then select the Internal_sd, and that will allow you to copy the PH98IMG file to the SD card. Then continue with the rest of the directions. If you do this right, you should be ok.
Click to expand...
Click to collapse
It's the actual recover I believe to be giving me the errors, but I'll try what you said in about 2 days (I need to study for finals). It might be because I tried to S-Off and I installed all of that guys software and it might be making the phone act funny. I'll be much more descriptive about my errors when I post back in 2 days.
I fixed it!!
Ok, so I finally got it working, I'll try to detail my steps for anyone else who ran into similar issues:
I believe my recovery started acting funny after I failed to S-Off properly the first time. Amon Ra was all gimmicky and said stuff like "E: can't find cache" and reinstalling the recovery/wiping everything (and I mean everything: external SD, internal SD, cache, partioning SD card etc..) wasn't working. I tried re-installing Amon Ra through command prompt with the adb, I tried reinstalling my ROMS but my phone wasn't having it.
It got to the point all I could boot into was a white HTC screen, so I then tried out Twrp's 2.1 Touchscreen (I wasn't S-Off yet) recovery (I don't have enough posts to post a link yet ) which INITIALLY reported the same "E: can't find cache" errors as Amon Ra, BUT when I wiped my files in Twrp it seemed to actually fix them...I'm not sure exactly what I wiped or formatted that fixed the "E: can't find mount/cache" issues, so try everything.
So my ROM installed but I was still stuck on the white HTC logo. This is where I INSTALLED A NEW KERNEL THROUGH ADB. I wish I knew which kernel I installed, but I have like 10 and I just picked a random one. The point is if you're still stuck at a white HTC screen, install a new kernel.
So I got a recovery on the phone, and then I tried to S-Off again but I didn't have a good ROM installation so that was hanging at the HTC white screen. I then installed CleanROM DE 1.4 and I was able to boot into it, but ran into my initial problem of it crashing after dialing a number and entering infinite reboot. However, it would stay on just long enough for me to run ControlBear's program to S-Off.
So I S-Offed, I downloaded the Gingerbread RUU (the .exe version for Windows), I installed it, and now I can dial numbers and I'm all goodie again. Unfortunately, I honestly think the only way I was escaping my trouble was doing an S-Off, unless they leak a Ice Cream Sanwhich executable for Windows.
TL;DR Install Twerp 2.1 through adb, wipe everything, install CleanROM DE 1.4, install kernel S-Off, run Gingerbread RUU .exe

[Q] rezound wont start after flashing roms

Hi everyone, so this is my first post here so please deal with me. I did check for similar problems with no results and think I'm posting in the right area. So try not to get too frustrated with me if I'm wrong. Anyway, with all of that out of the way on to my problem.
I have a rooted rezound, which was first rooted to get rid of bloatware and such, but I decided I wanted to try out some different roms. My problem is every time I flash a rom, which appears successful, but whenever it boots up it'll freeze up on the HTC screen. To fix this I've been just been pulling the battery and restoring to the backup I made before trying to flash roms. I would really like to try some different roms but I've gotten stuck on that screen with each one I've tried. If anyone could help me I'd greatly appreciate it!
Some additional info: I use to have a rooted thunderbolt and have some experience with flashing roms and all that stuff, but I'd still consider myself a noob. I have Amon Ra Recovery on my rezound and the screen in hboot reads:
***Unlocked***
vigor put ship s-on rl
HBOOT-2.11.0000
eMMC-boot
Oct 6 2011, 15:43:22
(I'm not sure why it says the incorrect date and time?)
I've tried several different things to successfully flash roms. I've tried flashing them with and without PH98IMG.zip on the root of my sd. I've tired it with and without the back on my phone. When flashing roms I ALWAYS wiped all data before flashing. That's just about everything relevant I can think of, sorry for the length! I figured the more information the easier for you guys to help!
If you're S-ON, you need to flash the P98IMG zip with the ROM. This contains the boot.img file.
Just extract the ROM of choice, take the P98IMG zip, throw it on your SD card and boot into your bootloader. Go into the bootloader menu and it'll install. Reboot, phone will work just fine.
If there isn't a P98IMG file and just a boot.img file, just push it through ADB while in your fastboot.
command is fastboot flash boot boot.img
So the P98IMG.zip file I downloaded and had on the root of my sd card is different than the one I need to extract from the rom or was I just not installing it right?
I did have a P98IMG.zip on the root of my sd card and I went into hboot, then I went to recovery and flashed my rom. Is there another step I need to take in installing the P98IMG.zip or should it automatically install? Do I need to reboot it between installing the P98IMG.zip and the rom?
Thanks for you help and quick response! I'm really trying to learn and get better at this stuff
After you flash your ROM, go into your bootloader (fully, must be in the bootloader menu) and it'll install. Follow the onscreen instructions, reboot, and remove the zip from your SD card.
Hope that helps.
I still cant get it to work :/
Heres step by step what I did:
1) Went into hboot > recovery
2) Wiped all data
3) Flashed ROM
4) Powered off phone using option in the recovery menu
5) Powered back on into hboot. The green text appeared that said loading and stuff about P98IMG and a blue bar on the side, but this process was very brief (maybe 2 seconds tops) and there were no instructions to follow
6) Went into recovery and rebooted my phone where I was stuck on the the HTC screen again
Can you point out where I'm going wrong or any possible issue?
Thanks again for you patience! I really appreciate your help!
ewy87 said:
I still cant get it to work :/
Heres step by step what I did:
1) Went into hboot > recovery
2) Wiped all data
3) Flashed ROM
4) Powered off phone using option in the recovery menu
5) Powered back on into hboot. The green text appeared that said loading and stuff about P98IMG and a blue bar on the side, but this process was very brief (maybe 2 seconds tops) and there were no instructions to follow
6) Went into recovery and rebooted my phone where I was stuck on the the HTC screen again
Can you point out where I'm going wrong or any possible issue?
Thanks again for you patience! I really appreciate your help!
Click to expand...
Click to collapse
How are you getting to recovery? It should give you an option to install update or reboot in hboot. If the ph98img is in the right spot you shouldn't be able to boot into recovery
With my phone powered off I'm holding down the power button and down volume button to get to hboot. I have my ROM and the PH98IMG.zip file both on the root of my SD card. It does very quickly appear to load the PH98IMG file but returns to the hboot screen the has the options: fastboot, recovery, factory reset, clear storage, sim lock, image crc.
Could it be that the PH98IMG file should be somewhere else? And was I doing everything in the correct order or do I install the PH98IMG first?
File may be bad. Do you have adb set up?
Sent from my ADR6425LVW using Tapatalk 2
Well actually I'm running off a mac and I've been using my sisters laptop for adb and that stuff but she just broke it...just my luck haha. Would I be able to download a different copy of PH98IMG from online and try that?
What ph file are you trying to flash? It should load it and ask if you want to update. Try downloading it again. May be a bad download
I'm trying to flash the Senseless-4.0.3-ICS-v1.0.0[2/4/2012] ROM (http://themikmik.com/showthread.php?11238-Senseless-4-0-3-ICS-v1-0-0-2-4-2012&p=178493#post178493) and I just saw a download for the PH98IMG file somewhere else on the website. Should the ROM include its own PH98IMG file? Thanks for both of your help! I have no experience with the PH files because my thunderbolt was s-off so i never dealt with this stuff before.
ewy87 said:
I'm trying to flash the Senseless-4.0.3-ICS-v1.0.0[2/4/2012] ROM (http://themikmik.com/showthread.php?11238-Senseless-4-0-3-ICS-v1-0-0-2-4-2012&p=178493#post178493) and I just saw a download for the PH98IMG file somewhere else on the website. Should the ROM include its own PH98IMG file? Thanks for both of your help! I have no experience with the PH files because my thunderbolt was s-off so i never dealt with this stuff before.
Click to expand...
Click to collapse
So s-off. Seriously though. You flashed a random ph file and thought it would work? It has to be the right one for the rom. Besides that rom isn't maintained anymore
The only method to get the rezound to s-off was using some wire trick and seemed like a difficult process. Would you recommend I do that?
And the post with the ROM said and ICS PH file would be fine, so I assumed it'd work. I guess I'll try a different ROM that includes a specific PH file and up to date. In which case I should be able to get everything to work with all the help from you and Chyrux. Thanks for everything!
ewy87 said:
The only method to get the rezound to s-off was using some wire trick and seemed like a difficult process. Would you recommend I do that?
And the post with the ROM said and ICS PH file would be fine, so I assumed it'd work. I guess I'll try a different ROM that includes a specific PH file and up to date. In which case I should be able to get everything to work with all the help from you and Chyrux. Thanks for everything!
Click to expand...
Click to collapse
I would recommend getting s-off. It's going to be the only method for this phone. I mean why waste another exploit to be patched? I would recommend con rom since it uses aroma to detect whether your s-on or s-off
Did you s-off your rezound? How were your experiences with it? I'm just worried about bricking my phone. But thanks for the ROM recommendation! I've been trying to find a good ROM
S-off was fairly easy, but you do need Windows or a Linux build.

need help for stock return

I am an unfortunate rookie, and have made mistakes, hence the name. I want to return my phone to stock from htcdev unlock, s-on, hboot 1.5. with a boot loop on meanom ICS for the evo 3d. I have tried to use older ruu shooters. Relock with fastbot oem lock, and then pg86img. However with the bootloop I can not access anything unless I unlock again, and then go into recovery. This is all that I can think of at the moment that might help.
Kill the rookie!!! PLEASE HELP!!
I had much the same problem with my cdma, hboot 1.5, S-On shooter. When I was S-On none of the ICS roms would work. The all bootlooped on me. If you follow the rooting method found here on xda, it will get you back to a stock Rooted GB Rom.
go into hboot -> fastboot USB-> run command dos -> fastboot cwm-4.0.1.4-shooter.IMG -> flash the 2.17 firmware-> enjoy.
I had to S-off with Juopunutbear, then re-run that root/flash to get past the bootloops.
Sent from my Shooter using xda app-developers app
Unfortunately I have tried that and it still is not working.
My only suggestion would be to try it a few times, other then that, its above my head.
Sent from my shooter using xda app-developers app
rookiemistake said:
I am an unfortunate rookie, and have made mistakes, hence the name. I want to return my phone to stock from htcdev unlock, s-on, hboot 1.5. with a boot loop on meanom ICS for the evo 3d. I have tried to use older ruu shooters. Relock with fastbot oem lock, and then pg86img. However with the bootloop I can not access anything unless I unlock again, and then go into recovery. This is all that I can think of at the moment that might help.
Kill the rookie!!! PLEASE HELP!!
Click to expand...
Click to collapse
Have you tried one of the ruu exe files that you run from your computer? If you are trying to go stock, you should be able to relock the bootloader and run the ruu and that's it.
Sent from my ICS 3VO with Tapatalk 2
First of all I want to thank everyone that has been attempting to assist me with my problem. I have tried to relock since I am on htcdev unlock and then run an ruu force via my computer. I get an installation aborted error when trying to flash pg86img via recovery. I don't know what else to say.
You can't flash a bootloader zip from recovery. You have to flash it from hboot. Also make sure the zip is named correctly "PG86IMG.zip" without the quotes. Also make sure the zip is on the root of your sd as in not in any folders. Once you've named the zip correctly and placed it correctly then power off the phone. Hold down the volume down button and tap the power button. You should boot into the bootloader wait until the phone recognizes the zip and follow the on screen instructions. Hopefully this helps.
#Root-Hack_Mod*Always\=LTE
Thank you again. I tried your directions, it did recognize the pg86img. However it did not give me any instructions to follow. It did however allow me to be able to a partial stock state. My software version is still on the teamgenesis sense v2.9 cdma. Although I do like some of the features on this rom, I would still like to be able to get the OTA of ICS when it is released. Any suggestions?
rookiemistake said:
Thank you again. I tried your directions, it did recognize the pg86img. However it did not give me any instructions to follow. It did however allow me to be able to a partial stock state. My software version is still on the teamgenesis sense v2.9 cdma. Although I do like some of the features on this rom, I would still like to be able to get the OTA of ICS when it is released. Any suggestions?
Click to expand...
Click to collapse
To get the ota release (if it ever comes ) I do believe you will need to be locked and running the existing gingerbread rom. While I am not positive, I think the system uses the props file to determine if an update is applicable, and it will likely not recognize the teamgenesis rom version as being upgradeable.
Now I will likely get flames for saying this, but if you want to put the meanrom v2.4 of ICS on the phone, it can be done with s-on, you just need to follow the correct process. I ran that rom for a while, and it is very stock like, stable, and has a few enhancements that you will not find on a non-rooted stock rom. I never found anything wrong or not working with that rom.
To get it to load, first I downloaded flashimagegui from market, put the meanrom zip file on the sd card and made sure I had a recovery that I could get into. I am using TWRP v2.1.1, lots of folks talk about others like ext4, and I am only going to say use whichever you like, after all it is your phone.
Then with the phone unlocked via the htc method, I started the flashimage app, and browsed to the meanrom file. It extracted the kernel and flashed it. Once that was done, with clear cache buttons selected, rebooted to recovery, and used the install menu selection of TWRP to again flash the same rom file. Once it flashed the file, selected clear cache and dalvik just to be safe, selected reboot system, and it worked great.
Have a great weekend.
So, apparently I am still doing something wrong. I have put the pg86img on the root, relocked to the bootloader, and let it run it's course. However, it will get through with reading it and stops and does not finish anything with loading the system information. I have also tried to run the ruu via usb connection. I keep running into a c++ issue saying runtime error. I have wiped everything and thankfully I did make a backup of the rom and other information that I was runing so I can currently fall back on that.
I am on hboot 1.5, 2.17, and teamgenesis ICS rom for evo 3d.
Apparently there have been rumors that Sprint has finally released the ICS OTA, not that it really matters anymore, but I have run into a few interesting glitches, such as WIFI not staying connected while asleep or disconnecting.
If I have to I am willing to pay to do a netmeeing with someone in order to be able to fix this.
Sorry if it sounds like I am getting frustrated, but I have tried every walkthrough that I have found and have not had any luck with any of them.
Please help.
I forgot to say I am s-on

Categories

Resources