CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
What are Nightly build ? : auto compile build from the CyanogenMod github, each time there are new corrections on it.
This version change each night, and aren't support officialy, if you find bugs/issues you can/must discuss here.
There are no Google Apps bundled with CM ROMs, because Google asked Cyanogen to remove copyrighted apps from his roms,
after flashing rom don't forget to flash Google Addon package if you want it.
Instructions:
Root the device and install ClockworkMod Recovery.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Download Links:
http://get.cm/?device=e610
GAPPS
http://goo.im/gapps
going to check it out right now ! awsome!
Benchmark
I did benmark and there are results
Free L5: 1850
Cynaogenmod: 1309
unfortuneately i had bootloop (bricked my device) after reinstalling the KDZ iam going to test it again ...
E: be sure you download the correct bootloader! there is 1 for the E610 and 1 for the E612!
this solved my bootloop check out which one you should take here : http://forum.xda-developers.com/showthread.php?t=2186161
Bugs?
I noticed that this cm10 for e610 has a kind of problem with multitouch,I have played shadow gun,modern combat 3 and modern combat 4 and six guns and in all these 4 games, I noticed that I can't move at the same time that I shoot,I wait that they or you could solve this problem in next update ;p
Sent from my LG-E610 using xda premium
cant copy any version ( it loop at 80%~) by the phone or by PC
---------- Post added at 11:20 PM ---------- Previous post was at 10:26 PM ----------
Aassert failed: getprop ("ro.product.device") == "e610" || getprop ("ro.build.product") == "e610"
E: Error n/sdcard/DaFlashare/cm-10-20130310-NIGHTLY-e610.zip
(status7)
Installation aborted.
Click to expand...
Click to collapse
solved deleting the first row in META-INF/com/google/android/updater-script
BOOTLOOP
can it be used on e612?
xstatik said:
can it be used on e612?
Click to expand...
Click to collapse
yes
i try again this time following the clean everything on my phone first
after a successful install now the sd card is out of whack????
AW: [ROM] [NIGHTLY] [E610] CyanogenMod 10 - Official
Hi friends....
1. I install v10L on my device (e610)
2. I use bootloader for e610
3. I install cwm after routing
4. I install cm 10 nightly and now i have bootloop every 3-5 min.
Cant go back to kdz cause my phone not found cause i cant apply debugmode if i connect the cable
Any ideas ?
Sent from my GT-P3110 using xda app-developers app
Odp: [ROM] [NIGHTLY] [E610] CyanogenMod 10 - Official
eks.konoko said:
Hi friends....
1. I install v10L on my device (e610)
2. I use bootloader for e610
3. I install cwm after routing
4. I install cm 10 nightly and now i have bootloop every 3-5 min.
Cant go back to kdz cause my phone not found cause i cant apply debugmode if i connect the cable
Any ideas ?
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Vol + and - and plug usb in.
I have no bootlops and any isues.
Ewerything works great.
I sugesst you guys to read some android guides for noobs first, then complain.
Sent from my LG-E610 using xda app-developers app
Great work... Everything works nicely except the multi touch
Sent from my LG-E610 using Tapatalk 2
[MODS/OP] Please either rewrite the first post or delete this thread
This thread isn't ours (CM). Please redo the text in the OP, which looks like an engrish version of our usual posts and has "we" references from an unknown, or delete the thread altogether. Thanks.
go into cwm and format system/data/cache and install ur cm and its working perfect....
and a question ... I wanna port MIUI for our device. any user that wanna have miui ?? sry my english noob like xD
don't work on E612
AW: [ROM] [NIGHTLY] [E610] CyanogenMod 10 - Official
eks.konoko said:
Hi friends....
1. I install v10L on my device (e610)
2. I use bootloader for e610
3. I install cwm after routing
4. I install cm 10 nightly and now i have bootloop every 3-5 min.
Cant go back to kdz cause my phone not found cause i cant apply debugmode if i connect the cable
Any ideas ?
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
flatzki said:
go into cwm and format system/data/cache and install ur cm and its working perfect....
and a question ... I wanna port MIUI for our device. any user that wanna have miui ?? sry my english noob like xD
Click to expand...
Click to collapse
Still the same bootloop
Sent from my GT-P3110 using xda app-developers app
AW: [ROM] [NIGHTLY] [E610] CyanogenMod 10 - Official
flatzki said:
go into cwm and format system/data/cache and install ur cm and its working perfect....
and a question ... I wanna port MIUI for our device. any user that wanna have miui ?? sry my english noob like xD
Click to expand...
Click to collapse
I dont know how but i got it to work now thanx for your help @ all
Sent from my GT-P3110 using xda app-developers app
I think there is to upgrade graphical apparence, dont know why but looks better in stock rom or others
Related
CyanogenMod is a free, community built distribution of Android 2.2 (Froyo) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* The CM team is not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting fired because the alarm app failed, or anything whatsoever.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is an AOSP-based build with extra contributions from many people which you can use without any type of Google applications. I found a link from some other project that can be used to restore the Google parts, which can be found below or elsewhere in the thread. I've still included the various hardware-specific code, which seems to be slowly being open-sourced anyway.
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github!
If you'd like to to contribute to CyanogenMod, checkout our Gerrit instance.
INSTRUCTIONS:
- First time flashing CM 6 (or coming from another ROM)?
1. Unlock/root your device - http://forum.xda-developers.com/showthread.php?t=754020
2. Do a Nandroid backup!
3. Update your radio if necessary
4. WIPE
5. Install the ROM
5. Optionally install the Google Addon
- Upgrading from earlier CM6?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Get me the file "/proc/last_kmsg".
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get me the full output.
- Pastebin links preferred
- Please use the issue tracker whenever possible!
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
The preferred method of installation is via ROM Manager, or you can head over to the CM Forums for manual downloads.
There is still an issue with some Bluetooth headsets in this build. I am hoping to resolve it this weekend.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
I just shat rainbows. First my g1. Now my slide. Will flash in the am. You'll catch a beer on my next paycheck.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Nice! Downloading now.
Sent from my T-Mobile myTouch 3G Slide using XDA App
siccmade said:
Nice! Downloading now.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
ditto and I LOVE THE warning..
Thermonuclear war, getting fired if you point a finger at me i will laugh
Downloadin!
Flashin!
Flashin gapps!
Nice to see you over here in the slide section. Now we will have to stable roms
Sent from my T-Mobile myTouch 3G Slide
Apply the zip from SD choose the CM ROM then apply zip from SD and choose gapps?
FInally...
ur name on the product is all i need lol
HOLY NUTS!
I don't have too much experience with CM mod.All i need is my contacts sync and marked app,all the other google apps i don't want.Is there a way just to install market app and contacts sync without installing whole google apps zip?
Sent from my T-Mobile myTouch 3G Slide using XDA App
In case anyone else is interested in trying this out, I was in the process of flashing the latest nightly build and applying the latest Firerat patch for the g1 because it has a patch for a2sdext. It seemed to work, but I didn't have a chance to test it because this ROM was just released and I'd rather play with this.
But if you want to try it out, here's the link:
http://forum.xda-developers.com/showthread.php?t=679572
I'm probably going to try it out after I get a backup for this ROM.
lviv73 said:
I don't have too much experience with CM mod.All i need is my contacts sync and marked app,all the other google apps i don't want.Is there a way just to install market app and contacts sync without installing whole google apps zip?
Click to expand...
Click to collapse
This should help you out:
http://wiki.cyanogenmod.com/index.php?title=Barebones
What do i need to install from google apps just for the market to work?
rain_ten said:
This should help you out:
http://wiki.cyanogenmod.com/index.php?title=Barebones
Click to expand...
Click to collapse
Thanx,i already seen that.Its not easy as putting apk in /system folder,there is /etc /libs and /frameworks that need to be installed also.I just want to know what i need for market app to work cuz i dont want to install the whole google zip with things i dont need.
Just installed flash player apk and now when I open my browser it closes before the page loads. ( no force closes) It just shuts down.
Sent from my T-Mobile myTouch 3G Slide using XDA App
sweet .... Good work! !
Sent from my T-Mobile myTouch 3G Slide using XDA App
the only thing i dont like is the gapps zip bc it has all the bs apps like facebook and twitter,,,and i dont want them
Wifi is borked no market access
Sent from my T-Mobile myTouch 3G Slide using XDA App
rain_ten said:
In case anyone else is interested in trying this out, I was in the process of flashing the latest nightly build and applying the latest Firerat patch for the g1 because it has a patch for a2sdext. It seemed to work, but I didn't have a chance to test it because this ROM was just released and I'd rather play with this.
But if you want to try it out, here's the link:
http://forum.xda-developers.com/showthread.php?t=679572
I'm probably going to try it out after I get a backup for this ROM.
Click to expand...
Click to collapse
please let me know your findings on this. as i JUST switched back to a 2.1 rom w/ apps2sd..repartitioned my card with ext3 and all. just couldn't deal w/ froyo fat32. lol
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the HTC Espresso, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post
CyanogenMod:
Latest version: update-cm-7.1.0-Slide
Download: link
Mirror: link
MD5sum: e4024bb9125c920d233dfdd77abfba6c
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
The wifi-issues seem to be completely random, so I've lost all hope on that. The SYM key hasn't worked for at least a few weeks. Aside from that, awesome.
Thank you for your hard work. I hope your team won't discontinue Slide/ Espresso and we will enjoy CM8.
absolutely agree. Thanks so much. I hope to see continue support.
Irreplaceable Contribution
Thank you CM. Your work has been incredible!
skam69 said:
thank you for your hard work. I hope your team won't discontinue slide/ espresso and we will enjoy cm8.
Click to expand...
Click to collapse
we don't speak of cm8. There is only cm9
im having a issue.. i just flashed cm7.1 on my side with s-on and im haveing issues of the phone not responding when i wake the phone. the phone screen will not wake and i had to pull the pattery for it to work again.
arsonist63086 said:
im having a issue.. i just flashed cm7.1 on my side with s-on and im haveing issues of the phone not responding when i wake the phone. the phone screen will not wake and i had to pull the pattery for it to work again.
Click to expand...
Click to collapse
Wipe, wipe dalvik, reflash, see what happens..
Sent from my T-Mobile myTouch 3G Slide using xda premium
Much thanks for this.
My cm7 constanly loses 3g and i get no calls and text. I have to reboot phone to get it working again...any solutions. I lose all mobile connection until I reboot...It happens randomly..on mytouch 3g slide..
hey is the ICS theme for CM7 working for any of you guys? it's not working for me..
keeps saying that the theme was "improperly compiled"
Ekorshus said:
Wipe, wipe dalvik, reflash, see what happens..
Sent from my T-Mobile myTouch 3G Slide using xda premium
Click to expand...
Click to collapse
thanx did what u said and so far so good .. I hadn't wiped the delvik
Sent from my T-Mobile G2 using XDA App
saranhai said:
hey is the ICS theme for CM7 working for any of you guys? it's not working for me..
keeps saying that the theme was "improperly compiled"
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1317283
Use that one for mdpi. The apk is at the bottom of the op. Theres also the mod for ics lockscreen. Been using this theme for a while and its smooth.
Sent from my fingertips using Android.
@ arsonist, Good! Glad to hear it worked out for ya!
Sent from my T-Mobile myTouch 3G Slide using xda premium
Is there a way to install flash... market says that it is not available for this device????
crisarn said:
Is there a way to install flash... market says that it is not available for this device????
Click to expand...
Click to collapse
Market has only armv7 version. You've got to search for flash 10.2 for armv6
I installed that today and tried watching a video on Evilbook and it said I had to install Flash player to the newest version.
Sent from my T-Mobile myTouch 3G Slide using xda premium
In my case that's how it works: install flash player for our processor type, run fix permissions in Rom manager, reboot, everything works. Try checking flash player availability by visiting whatismyflash.com. It should indicate 10.2.x.x
Anyone have any fixes for the sym key not working?
ovar said:
Anyone have any fixes for the sym key not working?
Click to expand...
Click to collapse
There is none
XDA is my Facebook
ParanoidAndroid 1.6
(Unlocked bootloader only)
ParanoidAndroid is a free, community built distribution of Android 4 (Ice Cream Sandwich) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Known issues being worked on:
FMRADIO
This build is complete and based on latest fxp 216 sources!
Enjoy!
You Can donate to me and/or press Thanks!:good:
I'm not responsable of any damage that you or you phone will suffer by using my work
DOWNLOAD
19MAY2013 CM9.1 FXP216 PA1.6 : http://www.mediafire.com/?fwc25xakzmnx6z9
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from pa zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
The build is completely work excepted for above bugs, Enjoy!
ENJOY AN UNOFFICIAL PA 1.6 RELEASE BROUGHT TO YOU BY GEKTHEBOSS
KERNEL SOURCE
http://developer.sonymobile.com/dow...d-6-1-1-b-1-54-6-1-1-b-1-56-and-6-1-1-b-1-75/
thanks to FXP for all!
And thanks to pa team(molesarcoming and d4rksynisis)
GEKTHEBOSS said:
ScreenShots :
Charachteristics :
MassStorage+ADB Pre-Enabled
SuperSU binary with SuperUser App
Linaro Kernel
More More and More!
Extra
Click to expand...
Click to collapse
Reserved for Feed back
can you post some screenshot please?
Re: [ROM]{PA1.6-CM9.1} PARANOIDANDROID (unofficial) #FXP213#
Everything working fine as usual..
But had to use ur signed YouTube app..
This thine their a new bug with lock screen weather..
I isn't updating...
Unable to verify my location..
Also when ever I install a new app...
And when I open it for first time device softr3boots without any error..
I installed beautiful widget and face this problem..
Also wide sum other apps..
Sent from my Xperia U using xda premium
Re: [ROM]{PA1.6-CM9.1} PARANOIDANDROID (unofficial) #FXP213#
Noob question
I'm on FXP 213, can I Just Flash this over it or not?
Sent from my Xperia U using xda premium
Not convinced.
risasuke said:
Noob question
I'm on FXP 213, can I Just Flash this over it or not?
Sent from my Xperia U using xda premium
Click to expand...
Click to collapse
Yes, just flash the boot.img first, then wipe data and cache and install the ROM and gapps.
Please correct me if I'm wrong.
R: [ROM]{PA1.6-CM9.1} PARANOIDANDROID (unofficial) #FXP213#
Does PA 1.6 have Phablet mode?
Sent from my Xperia U using xda app-developers app
Great, thanks for this ROM. One of my favorite.
Re: [ROM]{PA1.6-CM9.1} PARANOIDANDROID (unofficial) #FXP213#
This Tim their a a new self optimized mode..
See below..
Sent from my Xperia U using xda premium
Thanks for effort .!
- Camera is a bit laggy. I mean picture is not in center. I have black square at 2/3 of screen and can't make foto. But
Thats all for now. I'll test and report in thread if i find more bugs.
Btw: Apps installing without restarts.
U might be using tablet mode with lower density..
Change camera in hybrid mode to
Ui- phone ui
Dpi- phone dpi(stock)
Then go to apps clear camera data..
And ur camera will work ok
Now it will only lag for first time lik also in aokp...
Then it will run ok..
When ur r installing any app and opening it for first tim..
Ur phone isn't rebooting??
I installed following and fased error
Tapatalk hd
Beautiful widgèts
Uccw
Sent from my Xperia U using xda premium
happy3777 said:
When ur r installing any app and opening it for first tim..
Ur phone isn't rebooting??
I installed following and fased error
Tapatalk hd
Beautiful widgèts
Uccw
Click to expand...
Click to collapse
No, just tried to install this apps too, no reboots. Even if i didn't made any wipes (because i had FXP213 and a lot of programs i don't want to delete)
May be its wid me
So nw is ur camera ok?
Sent from my Xperia U using xda premium
mirco_pa said:
Does PA 1.6 have Phablet mode?
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
Nope , only PA 2.XX
New rewievs?
In new version i have :
Fxp214 source based
Linaro kernel toolchained
Filenanager aosp
Pa wallpapers
Pa over cm!
GEKTHEBOSS said:
New rewievs?
In new version i have :
Fxp214 source based
Linaro kernel toolchained
Filenanager aosp
Pa wallpapers
Pa over cm!
Click to expand...
Click to collapse
I can't get it....
Whenever I install a PA rom Raparom,PA,SPAC my camera doesn't work right,I mean picture is not in center. 3/4 part of the screen has black bars. even watching youtube videos (or any other video) in Landscape (full screen) doesn't work.
ANYONE?
CyanogenMod 10 is a free, community built distribution of Android 4.1.2 (Jellybean) which greatly extends the capabilities of your phone.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CM10 for the Samsung Galaxy Player 4. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
Note: Please backup your efs in case of something goes wrong (the zip should backup it but we're never too sure) To do so execute this command:
Code:
dd if=/dev/block/stl3 of=/sdcard/efs.rfs
Preview Install instructions:
*** If upgrading from CM9, it is recommended that you wipe data.
1. Download cm-9-20130402-kernel-preflash.zip
md5: 4a900fcddbc3d81d121a7b9c9d4bb0a0
2. Download cm-10-20130614-EXPERIMENTAL-ypg1.zip
3. Make all your backups.
4. Make sure your efs is intact (not blank).
5. Boot into recovery, make more backups.
6. Flash cm-9-20130402-kernel-preflash.zip (temporary workaround for first-time install)
7. Flash cm-10-20130614-EXPERIMENTAL-ypg1.zip
Installation Notes:
When you install for the first time, there is a conversion to the new MTD partition layout. The installer will flash the new kernel and reboot. It is possible for this process to hang up on the samsung logo (still working that part out). It is normal to see the Samsung logo appear 3 seperate times during this reboot phase. **Please wait at least a minute before assuming you are stuck.** If this happens, you should extract the boot.img from the installer zip and flash it with heimdall (heimdall flash --kernel boot.img, or other appropriate GUI methods). It should boot back into recovery and continue the installation. Once the install finishes, it should reboot once more back into recovery, which gives you the opportunity to flash your gapps.
**Google Apps are not included in these ROMs. You'll need to install those yourself if you want them. Recommended and highly suggested are the 4.1.2 gapps from goo.im.
Install video thanks to daniel644
Known Issues:
- Bluetooth Fixed 6/14
- Camera mostly working: Front cam doesn't take pictures, and is sideways. Video recording is limited to 800x600.
- 3-finger recovery boot temporarily disabled. Fixed 6/14
- Mass storage in recovery mounts external sdcard Fixed 4/21
- GPS Fixed 4/21
- VPN Fixed wtih 3.0 kernel
- Weak Vibration Fixed wtih 3.0 kernel
- USB tether Fixed wtih 3.0 kernel
- Other things
Sources
Jellybean3.0 branch:
Device tree: https://github.com/bbelos/android_device_samsung_ypg1
ypg1-dev branch:
Kernel source: https://github.com/bbelos/android_kernel_samsung_aries
Previous versions:Install video thanks to daniel644:
3.0 kernel:
cm-10-20130610-UNOFFICIAL-ypg1.zip
2.6 kernel:
cm-10-20130421-EXPERIMENTAL-ypg1.zip
cm-10-20130416-EXPERIMENTAL-ypg1.zip
cm-10-20130414-EXPERIMENTAL-ypg1.zip
cm-10-20130413-EXPERIMENTAL-ypg1.zip
Reserved
Here as usual the Gapps package here:
Gapps Package JB Download
Issues:
Extrernal Sdcard symlink not working (/emmc)
GPS don't work Fixed 04/21
Camera is broken Partially fixed 04/16
Mp3 don't work (unless you use poweramp) Fixed 04/14
Youtube don't work Fixed 04/14
Quick note on installation:
If you're coming from CM9 preview builds (not nebula), you can flash the zip without doing anything else. (even without wiping /data but it's recommended to do so)
this is soo awesome. THANK YOU BBELOS
I have to say that for a first build this is running really well. Nice job.
Really smooth and responsive, Google Now looks great! This is really amazing. The one issue I ran into, which I assume you know about, is the fact that Poweramp always routes the sound to the speakers, even with headphones plugged in, which is kind of a deal breaker for me. Other than that it's working very well, can't wait to see what's next!
Outstanding work here, keep it up!
Awesome! Good work Bbelos! One question, do we need to flash the kernel preflash if were coming from cm9?
Sent from my YP-G1 using xda app-developers app
the playa! said:
Awesome! Good work Bbelos! One question, do we need to flash the kernel preflash if were coming from cm9?
Sent from my YP-G1 using xda app-developers app
Click to expand...
Click to collapse
No you don't need to do it, you just have to flash the build in CWM.
Envoyé depuis mon YP-G1 avec Tapatalk
AWESOME!! This is soo cool!!! How do I get Google Now?
the playa! said:
AWESOME!! This is soo cool!!! How do I get Google Now?
Click to expand...
Click to collapse
Flash the gapps and then Gnow will be in the search bar.
zaclimon said:
Flash the gapps and then Gnow will be in the search bar.
Click to expand...
Click to collapse
Nice! I'm lovin this!
---------- Post added at 06:05 PM ---------- Previous post was at 05:43 PM ----------
My player's charging VERY slowly... Anyone else experiencing the same?
What kernel version does this from use?
Sent from my YP-G1 using Tapatalk 2
dorfd1 said:
What kernel version does this from use?
Sent from my YP-G1 using Tapatalk 2
Click to expand...
Click to collapse
Check by yourself...
Envoyé depuis mon YP-G1 avec Tapatalk
New build in the OP.
Changes: Better audio & video playback.
Kernel version is 2.6
and how's the camera coming along? If u fixed it in CM9 then u can fix it in CM10 too right?
Sent from my YP-G1 using xda app-developers app
Sounds great! Unfortunately, I'll probably stick to CM9 for a little while, since the camera on that works. My sister really doesn't care about what ROM she's on as long as the camera is working.
Sent from my Nexus 7 using Tapatalk HD
This is absolutely awesome. Running great. Amazing work gentlemen.
Also, installed browser2ram and it greatly Improves browser performance. Makes a HUGE difference IMO
http://forum.xda-developers.com/showpost.php?p=34885711&postcount=58
Sent from my YP-G1 using xda app-developers app
Does 120 dpi give you tablet mode like it does on cm9 with modded services.jar.
I ask because I actually prefer to use 120 dpi.
Sent from my YP-G1 using Tapatalk 2
Bluetooth
Does Bluetooth work?
dorfd1 said:
Does 120 dpi give you tablet mode like it does on cm9 with modded services.jar.
I ask because I actually prefer to use 120 dpi.
Sent from my YP-G1 using Tapatalk 2
Click to expand...
Click to collapse
Don't know about this.
DeeJay1 said:
Does Bluetooth work?
Click to expand...
Click to collapse
Yes it does work.
Sent from my Nexus 7 using Tapatalk HD
WARNING! This ROM is for the GT-I9200 and GT-I9205 variant's only! If you choose to flash this on other variant's, you will face issues.
READ THIS & THIS BEFORE YOU PROCEED FURTHER.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
INSTALL GUIDE
https://docs.google.com/document/d/1deBgPOQnX3chWDt2hZdCXi1r1GuhQZvJtyLu-O4QNtA/pub
You need to flash the latest TWRP from here if you are planning to use a Marshmallow ROM. This is a must.
Also note that when you flash Gapps, refrain from flashing full or stock versions as it is found to mess with smooth functioning of the ROM, like the dialer. If you use Open Gapps, the best bet is to flash the pico version. Rest of the apps can be downloaded from the Playstore.
Note: ROM's for Galaxy Mega 6.3 are provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Warning: Do not restore backup data of system apps!
If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
It seems that restoring backups can also break Calendar sync.
DOWNLOAD LINKS
ROM : https://mega.nz/#F!shs3FQzR!dm7gzA3ZysrbIiJhShOndQ
GAPPS : OpenGapps | SlimZero
RECOVERY : https://mega.nz/#F!JgsgBAiZ!LwPPz4UWbUjTuUUyYbLP1A
UPGRADES
Upgrades from previous versions of ROM's are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data. Updates will be notified via OTA.
KERNEL SOURCES
https://github.com/CyanogenMod/android_kernel_samsung_msm8930-common
GELLO BROWSER
It will not be included in my builds. Users can download it from the link below.
https://maven.cyanogenmod.org/artifactory/gello_prebuilds/org/cyanogenmod/gello/
FAQ
Q: How the heck do I get root?
A: Goto Settings and About Phone. Tap Build number 7 times. Go back and enter Developer options. Change Root access to desired method.
Q: How to get compass working?
A: Shake the phone around in the air a few times.
OVERCLOCKED KERNELS
As I don't want any user who doesn't know what he is doing flashing this kernel, I have made the folder containing them encrypted. Decryption keys will be sent to people asking for them via PM / email. You can then use it to get the actual files. This will be needed only the first time. The files are available here.
Also note that I am providing these kernels with no tests made from my side, so expect issues. If you are not willing to take the risk, DO NOT FLASH. I will take no responsibility if your device ends up dead.
The cpu frequency has been hardlimited to the stock value of 1728000. If you want to overclock, you need to edit the /sys/kernel/cpufreq/hardlimit file and change the value to your liking. Don't go over the max value of 2052000.
KNOWN ISSUES?
Ghost button touches. Menu and sometimes back button get activated without user input. Only fix as of now is to change the short tap activity to none.
Update : Seems there are other devices that have the same issue. See here. Read the last post.
OTHER ISSUES?
Use this for obtaining logs.
For nightlies, bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
LOCAL MANIFESTS
If you want to try out builds on your own, message me for the sources.
CREDITS:
Arne Coucheron aka arco
Janson Kang aka temasek
MIne
This one too.
Oh yeah you rocks. Near about one week without flash your 2.1. Will try tonight i hope. Hope xda méga community will refind you here. Thank you for your wonderful work
2.4 is out.
Sent from my GT-I9205 using Tapatalk
I wanted to say that version 2.1 is perfect but 2.4 is already out so time to flash! On 2.1 I tried quite everything to make sure everything was working: gps, bluetooth (pebble and miband); I can't say anything about battery, it depends on my work: sometimes I live with phone in my hand, other times I use it only during lunch or small breaks..
Thanks a lot Silesh for your work, it's a pleasure see you also on xda
As we speak, temasek just released v2.5. Its hard to keep up with him.
Sent from my GT-I9205 using Tapatalk
Welcome back Silesh.Nair !! Big fan here.
V2.4 is flawless. Hope you can enable fast charge soon or at least normal charge.
Updated to V2.4, works perfect.
Welcome Back to XDA!! @Silesh.Nair
Thanks for keeping us updated! The new temasek V2.4 is running smoothly. nothing bad to report here.
How can i get Chainfires SuperSU? I need it to manage root access.
Silesh.Nair said:
As we speak, temasek just released v2.5. Its hard to keep up with him.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
Haha Lol , yesterday i downloaded v2.4, this morning i flashed it, now i want to say again thank you and all is good, but waking up my pc i see 2.5 out... Fast fast fast i have to wake me up
late again. v2.5.1 is out. I will wait til 2.7 is out to make a build.
Sent from my GT-I9205 using Tapatalk
RheinPirat said:
How can i get Chainfires SuperSU? I need it to manage root access.
Click to expand...
Click to collapse
The ROM is already rooted. Why do you need to flash SuperSU?
Sent from my GT-I9205 using Tapatalk
I'm currently trying your beanstalk 6.0 silesh. Thank you so much for your build. I dont know why, but I think i'm gonna stay with beanstalk for a while. Hopefully it'll get frequent updates too.
P/s: I follow your thread in android-hilfe.de
Sent from my GT-I9205 using Tapatalk
fuadhdmini said:
I'm currently trying your beanstalk 6.0 silesh. Thank you so much for your build. I dont know why, but I think i'm gonna stay with beanstalk for a while. Hopefully it'll get frequent updates too.
P/s: I follow your thread in android-hilfe.de
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
I didn't see it, i think that when i'll have some free days, i will give it a try. But for now temasek is really awesome. Latest version is really fast.
Welcome back Silesh. Temasek is working flawlessly.
Thank you and everyone involved for all the work you have done for us
I am replacing the OTA update app from the next build. Gonna use slimota. There will no launcher icon for this. It will be integrated into settings.
For temasek its accessible from Settings->OTA Updates.
For stock cm, its in Settings->About Phone->Cyanogenmod Updates.
Insufficient storage error
I dont think this is a rom related issue but maybe you guys have a solution for it:
Whenever i try to install a an app i get this error, even i have enough space to install it:
https://photos.google.com/share/AF1...?key=dTdIVWRFTHUyTEtNaEpYTmFGamgyQnVjNWIta1Fn
Edit: After deleting all cache from storege overview, it downloaded the app.
Temasek v.2.6 flashed (over v.2.4)and as everytime, all is OK. Allready with xposed and all is fine. TY once more time.