my odin eas stuck at set up conections and after i tried to chaneg the USB ports the odin dosn't reeding the phone
what can i do?
plese halp me
1. use a spellchecker.
2. reinstall drivers, uninstall Kies, use a different usb port/cable, use a different version of Odin, use a different pc.
Glebun said:
1. use a spellchecker.
2. reinstall drivers, uninstall Kies, use a different usb port/cable, use a different version of Odin, use a different pc.
Click to expand...
Click to collapse
thank you so much it workt!
Rightclick -> Run as administrator fixed this issue for me.
odin stuck
hy i have the same problem. i have reinstalled the drivers, use another odin, but it still wont connect? pls help
Crniy said:
hy i have the same problem. i have reinstalled the drivers, use another odin, but it still wont connect? pls help
Click to expand...
Click to collapse
Apart from changing cable / motherboard port nothing else can be tried .
jje
JJEgan said:
Apart from changing cable / motherboard port nothing else can be tried .
jje
Click to expand...
Click to collapse
Remove the external sd card,put battery back in phone,again in download mod,and try again flashing via odin...worked for me...
JJEgan said:
Apart from changing cable / motherboard port nothing else can be tried .
jje
Click to expand...
Click to collapse
Try it on someone else's computer, I kept running in to issues, and changed the USB port I was using, removed SD card, unplugged USB cable after I got the "PASS!" message in Odin.
Additionally ensure you have the right files
IceCreamBoris said:
my odin eas stuck at set up conections and after i tried to chaneg the USB ports the odin dosn't reeding the phone
what can i do?
plese halp me
Click to expand...
Click to collapse
disconnect internet
Make sure you are in odin mode on the device. I came from HTC One and didn't put my device in Odin mode. Duh.. right? lol.
You can get into Odin mode by doing "adb reboot-bootlaoder"
for the best results:
1.use an official Samsung cable
2. unplug all unneeded usb devices
3.reboot into download mode again
4.connect to a usb 2.0 port on the back of the pc
5.run odin as an admin
if that dose not work, make sure kies is removed, and re-install the Samsung drivers,
reboot pc, and try again.
solved similar problem...
reboot your phone into download mode, but yet not proceed, plug into pc, open odin (as administrator), put the firmware files in their respective places, and finally press vol up to proceed in download mode and press start, it must solve, if all else does not help .. hugs
Hope this helps, if so please press "thanks" ..
sent from my Galaxy Y Duos S6102 ..
About ODIN connection status stucking issue ...(Working solution)
IceCreamBoris said:
my odin eas stuck at set up conections and after i tried to chaneg the USB ports the odin dosn't reeding the phone
what can i do?
plese halp me
Click to expand...
Click to collapse
Do one thing when you are trying to connect in downloading , just make sure kies is not running at background.
Thing is kies blocks that connection which you are trying to make. It worked for me as well. All the best.
hp79 said:
Make sure you are in odin mode on the device. I came from HTC One and didn't put my device in Odin mode. Duh.. right? lol.
You can get into Odin mode by doing "adb reboot-bootlaoder"
Click to expand...
Click to collapse
Crap. Did the same stupid thing...
mikeprachar said:
Crap. Did the same stupid thing...
Click to expand...
Click to collapse
Happened to me too. The inductions I was following did not mention download mode.
Whooooo! It worked!
klijakliki said:
Remove the external sd card,put battery back in phone,again in download mod,and try again flashing via odin...worked for me...
Click to expand...
Click to collapse
This worked for me after having so many problems. Nobody was clear on how to fix it. I had soft bricked my phone. It wouldn't connect to Kies or allow any pit or rom being flashed to it. Everything would fail. I tried doing what you said and it worked. I always got the errors 'No pit partition' etc.
I plugged in the USB without the battery in.
Phone wouldn't switch on into recovery without battery in so I put it back in.
I then took it out and Odin wouldn't connect to it and start the process without the battery in so I put it back in.
I loaded up the pit file and started it! You should have seen my face! haha! It worked!
It booted up! Hooray!
I switched it off and booted it in recovery mode.
Installed new rom (hopefully this won't break)
Thank goodness for that. I feel your pain guys. If you need any help just message me.
amongstgeeks said:
This worked for me after having so many problems. Nobody was clear on how to fix it. I had soft bricked my phone. It wouldn't connect to Kies or allow any pit or rom being flashed to it. Everything would fail. I tried doing what you said and it worked. I always got the errors 'No pit partition' etc.
I plugged in the USB without the battery in.
Phone wouldn't switch on into recovery without battery in so I put it back in.
I then took it out and Odin wouldn't connect to it and start the process without the battery in so I put it back in.
I loaded up the pit file and started it! You should have seen my face! haha! It worked!
It booted up! Hooray!
I switched it off and booted it in recovery mode.
Installed new rom (hopefully this won't break)
Thank goodness for that. I feel your pain guys. If you need any help just message me.
Click to expand...
Click to collapse
Remember. You have to take out the SD card!
M47H!AS said:
reboot your phone into download mode, but yet not proceed, plug into pc, open odin (as administrator), put the firmware files in their respective places, and finally press vol up to proceed in download mode and press start, it must solve, if all else does not help .. hugs
Hope this helps, if so please press "thanks" ..
sent from my Galaxy Y Duos S6102 ..
Click to expand...
Click to collapse
Thank you! Worked perfectly.
Issue Solved = Simple Solution
As stated above:
plug in the USB cable - Then Press Volume "UP"
So friggin simple, why isn't this included in All the Instructions??
Switch off the device.. Boot in download mode and then click on start at odin
immediately start downloading !!
worked for me! !
Related
ODIN or my laptop wont recognize my vibrantttt...i already downloaded the rite drivers... and KIES and KIES mini ... i tried evryting switching USB ports opening and closing ODIN rebooting my phone clearing cache and data and nothing... and i no its noy hardware lockd kuz i kan easily go to recovery and download mode... i even tried it in a diffrent PC and nothing... it chages and evryting .. the only problem is .. wen i turn it on.. it stays in the smasung vibrant boot up screen..... n no i cant put debbugin USB because it wont load up the phone... any helppp plzzz
how exactly are you doing it? kindly post your procedures you might doing something wrong.
kush815 said:
i already downloaded the rite drivers...
Click to expand...
Click to collapse
Are you SURE that you download the RIGHT drivers?
lol
try this:
Open Odin (As admin, if on vista/win7)
Get your phone into DL mode.
Plug it in, watch for a COM port. If none show up within the minute unplug & replug (And DON'T close Odin this time)
iynfynity said:
how exactly are you doing it? kindly post your procedures you might doing something wrong.
Click to expand...
Click to collapse
Yeah, I'm with master... you sure you got the right drivers??
check out my thread here.. I had troubles with odin at first and as I figured out what i was doing wrong I updated the post. It pretty much walks you through what to do and directs you to different threads that deal with odin, the files needed, and what to do to make it all work.
If usb debugging was not enabled and you can't boot up the phone, you are screwed. I had the same thing happen to me. Sorry.
You shouldn't need USB Debugging if you are getting into download mode... I had the OTA JI6 update freeze my phone at the Vibrant screen. I was stock, unrooted, no debugging, and my phone is less than 2 months old.
I was able to get into Download mode by pulling battery (since power off didn't work), put battery back in, hold down volume up + volume down buttons, plug USB into computer, plug USB into phone and download mode came right up...
I then unplugged the USB from the computer and opened ODIN.
Plugged the USB back into the computer and ODIN recognized it... ran the JI6 ODIN update and it soft bricked with the computer ! phone logo... simply ran through the same procedure to get back into download mode and re-flashed with ODIN and it worked fine after that!! No data loss or anything!!
You just have to keep trying... you may think you've tried everything, but try it all again because doing it a second time, you may get lucky and it works.
Good luck!!
"firmware update encountered an error please use kies to enter recovery mode "
thats whats coming up on my phone after my pc crashed while i was trying to flash a firmware on odin
now odin doesnt see my phone when i put it in download mode and if i try to enter recovery mode i just get
"firmware update encountered an error please use kies to enter recovery "
i have no problem getting my phone into download mode i just cant get odin to see it to be able to flash a firmware .
any ideas or is there a different program i could use to flash a firmware
Go check this threat out.
http://forum.xda-developers.com/showthread.php?t=1457458
Firstly, no offence but please do not create topics with idiotic titles like "help" which do not describe teh topic in any way other then its a newbie thread.
Second use search before creating topics because its a good chance that the thread already exists or question has already been answered.
TheATHEiST said:
Second use search before creating topics because its a good chance that the thread already exists or question has already been answered.
Click to expand...
Click to collapse
i have searched the forums ,my problem is i cant get odin to see my phone and i have tried . i have taken out kies from my pc and kept the drivers for my phone on the pc . so i am just looking for a solution
You need to keep kies on your pc and then use Odin
Tool-kit said:
Go check this threat out.
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i followed this thread and it said to uninstall kies as it sometimes interferes with odin
odin wasnt seeing my phone when kies was installed and still not seeing it with kies uninstalled either
Yes it interferes with Odin. Just open your task manager and quit all tasks related to kies. Kies doesn't like Odin being able to do all the amazing flashing.
Chris.
Sent from my GT-I9100 using XDA
This should not happen... if it does... I'm guessing it's because... when you use kies, USB debugging should be off. And when you use Odin... you should enable USB debugging.
(This way has NEVER failed me... or anyone else I know. Otherwise something else must be up)
themadba said:
Yes it interferes with Odin. Just open your task manager and quit all tasks related to kies. Kies doesn't like Odin being able to do all the amazing flashing.
Chris.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
chris thanks but i even switched off my pc and and nothing in tassk manager is running related to kies
but thanks anyway
Because when you uninstalled kies, you probably removed the usb drivers you need. Try to re-install it and make sure you phone is in debugging mode after... before using odin.
If you don't want to install the drivers with kies, then you need to download and install the samsung drivers yourself.
cyberboob said:
make sure you phone is in debugging mode after... before using odin.
Click to expand...
Click to collapse
my phone wont boot up so i dont know if debugging mode is on and i have installed the usb drivers to my pc .
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
cyberboob said:
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
Click to expand...
Click to collapse
your not kidding lol
cyberboob said:
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
Click to expand...
Click to collapse
I don't think that's true. To flash via Odin, you just need drivers installed (with Kies installation, or stand-alone driver installation), and the phone needs to be in download mode. If these conditions are met and the phone is connected to the computer via USB, and Odin still doesn't see the phone, you may need to try another computer.
lol. Are you trying this while the phone is plugged in via usb? Try unplugging it first... then go into download mode... then start odin and then plug in your phone.
cyberboob said:
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
Click to expand...
Click to collapse
i was flashing a firmware and in the middle of it loading onto my phone ,my pc shut down my phone wont boot up . when it starts up it comes up with
two little pc's and it says firmware update encountered an error please use kies to enter recovery
i can get the phone into download mode but kies doesnt see the phone neither does odin .
if i try to enter recovery mode by holding down power ,home and volume up it comes up with the same message about the firmware error .
hope this explains it
ctomgee said:
I don't think that's true. To flash via Odin, you just need drivers installed (with Kies installation, or stand-alone driver installation), and the phone needs to be in download mode.
Click to expand...
Click to collapse
Then you know something I don't, because from all tutorials I've seen and videos... Odin won't see phone unless debugging mode is enabled.
cyberboob said:
lol. Are you trying this while the phone is plugged in via usb? Try unplugging it first... then go into download mode... then start odin and then plug in your phone.
Click to expand...
Click to collapse
oh ive tried that too lol
now downloading the drivers again and going to try and reinstall them
Well I hope it gets sorted, or someone with better knowledge can help you get it recognized by Odin or kies.
Past 5am here and I need sleep. Will check to see how you doing tomorrow. Good luck!
cyberboob said:
Well I hope it gets sorted, or someone with better knowledge can help you get it recognized by Odin or kies.
Past 5am here and I need sleep. Will check to see how you doing tomorrow. Good luck!
Click to expand...
Click to collapse
thanks for all your help , i have a feeling its the usb drivers for some reason
will let you know how i get on
thanks again
Hi guys, was having a few problems with my phone and decided that I'd flash the stock ROM again.
Went into ODIN as you do, and as I was flashing the stock ROM, for some reason or another I heard the disconnect/reconnect noise that Windows makes when you remove a device then FAIL came up in ODIN.
Now my phone's stuck with a phone connecting to a computer on the charge screen, it can't go into recovery mode but it can go into download mode.
Tried connecting it to my PC in download mode, and even though I've got the Samsung USB Drivers installed I get the 'USB Device Not Recognized' message, which means I can't flash the stock ROM in ODIN anymore.
Does anyone have any advice? Thank you.
JoshS2 said:
Hi guys, was having a few problems with my phone and decided that I'd flash the stock ROM again.
Went into ODIN as you do, and as I was flashing the stock ROM, for some reason or another I heard the disconnect/reconnect noise that Windows makes when you remove a device then FAIL came up in ODIN.
Now my phone's stuck with a phone connecting to a computer on the charge screen, it can't go into recovery mode but it can go into download mode.
Tried connecting it to my PC in download mode, and even though I've got the Samsung USB Drivers installed I get the 'USB Device Not Recognized' message, which means I can't flash the stock ROM in ODIN anymore.
Does anyone have any advice? Thank you.
Click to expand...
Click to collapse
Try installing samsung kies. The usb drivers are included.
princeownt said:
Try installing samsung kies. The usb drivers are included.
Click to expand...
Click to collapse
I have it installed, and I installed the USB drivers from the soft bricked sticky in this section. Neither have helped.
Hi!
Hi, you guys install ADB on your system? And also USB debugging mode on the phone?
Should be turned on which can be done by going to Settings>Applications>Development and select USB debugging.
Try this, for me its works
MafiaDroid said:
Hi, you guys install ADB on your system? And also USB debugging mode on the phone?
Should be turned on which can be done by going to Settings>Applications>Development and select USB debugging.
Try this, for me its works
Click to expand...
Click to collapse
I can't even turn the phone on at the moment. Only thing I can do is go into Download mode.
Help
Try this, take out the battery, then press and hold the ON button for 7-10 seconds (the longer the better). Reinsert the battery, then press ON button to start it. This is a soft reset, and wipes the temporary memory and empties all remaining power in the circuits. This helps on many phones and even laptops that won't start properly or show anything on screen.
If this does not work, try the next step. Again, do as above. But after inserting the battery, do not turn the phone on, but press and hold the ON button and the HOME button at the same time for 7-10 seconds. This is a hard reset, and works best if done after a soft reset. Just be sure the battery has at least some juice in it and isn't empty. If possible, try with another battery if this does not work.
Hope this helps!
Try going to device manager, you will probably find your device as an unrecognized device, uninstall the drivers, unplug and then plug it again and see.
if the prblm is hard then do a fresh installation of kies,device etec etc.....but if u have ur device in the device list on pc then first uninstall it...if possible try recovery mode and reset...
I tried everything you guys have suggested and none of that worked. Anyone else got any ideas?
Try everything (and I mean everything) on the following list. Given the problems you've had & that you've already tried some of these things, I'd try another PC. And if it doesn't work first go on another PC, then go thru the list & try everything on the 2nd PC.
*Ensure Kies & it's processes aren't running in Windoze task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google)
*Uninstall Kies, reboot, redownload & reinstall it, reboot, try the flash again. Also run Windoze Update.
*And if all this fails, try a different PC.
Tried all the above and a different PC.
It didn't work. I could fix the phone if the computer would pick up that the phone's connected - it just doesn't.
Total Removal of KIES including registry entries .
Reboot PC install a new copy of Kies .
Phone backup data and factory reset .
Set phone to USB storage mode using the Samsung cable connect to PC and wait for Windows to find USB drivers .Remove cable reboot phone .
Start Kies connect with cable wait for Kies to find the phone .
Note USB Debugging OFF and cable connects to a direct motherboard port only .
Nothing then only further suggestion would be to Format the PC and start over with a clean Windows install .
jje
I can't turn the phone on, it's stuck on the phone, triangle, PC screen.
I've tried fresh installs on three different PC's.
JoshS2 said:
I can't turn the phone on, it's stuck on the phone, triangle, PC screen.
I've tried fresh installs on three different PC's.
Click to expand...
Click to collapse
That's a forced download mode.
Try a blind flash to a stock firmware from Odin while connected to your computer with the phone on this screen. Even if Odin doesn't seem to register that it's connected. I've heard of at least one person this worked for.
At this point, you really have nothing to lose by trying this.
Bit of an update, I plugged it in again and it installed some drivers and ODIN picked it up. Only for it to disconnect a few moments later, now it keeps disconnecting and reconnecting over and over but ODIN's not picking it up.
JoshS2 said:
Bit of an update, I plugged it in again and it installed some drivers and ODIN picked it up. Only for it to disconnect a few moments later, now it keeps disconnecting and reconnecting over and over but ODIN's not picking it up.
Click to expand...
Click to collapse
I know you said you tried a different cable, but that sounds suspiciously like a bad cable.
It's not the cable, thanks any way.
Update 2: I managed to get it to connect long enough to flash the stock Kernel. Still didn't reboot. Then I connected it again and flashed the stock ROM, which bricked it again. Then I flashed the stock kernel and it works!
However, there is a problem:
When the phone gets turned off, it constantly shows the charging battery icon with warning triangle and a thermostat next to it. I can't turn the phone on because of this unless I go into Recovery mode and reboot system.
Any ideas? Thanks.
JoshS2 said:
It's not the cable, thanks any way.
Update 2: I managed to get it to connect long enough to flash the stock Kernel. Still didn't reboot. Then I connected it again and flashed the stock ROM, which bricked it again. Then I flashed the stock kernel and it works!
However, there is a problem:
When the phone gets turned off, it constantly shows the charging battery icon with warning triangle and a thermostat next to it. I can't turn the phone on because of this unless I go into Recovery mode and reboot system.
Any ideas? Thanks.
Click to expand...
Click to collapse
Now this sounds like a faulty/dirty/bad usb port.
ctomgee said:
Now this sounds like a faulty/dirty/bad usb port.
Click to expand...
Click to collapse
This was my original thought and my reasoning for flashing a stock ROM in the first place!
JoshS2 said:
This was my original thought and my reasoning for flashing a stock ROM in the first place!
Click to expand...
Click to collapse
I in no way recommend this, and not sure I would do it if I ever started having this issue...
BUT - I have heard that some people faced with this condition have fixed it by physically moving the small wafer board inside the USB port with a precision screwdriver (gently!) to a more "centered" position.
If that doesn't work, look at replacing that part. Either via warranty service if you still have it, or a service center.
Is there a possible way that someone can send me a recovery file for cwm that I can flash from an external SD card? My phone wasn't mounting to USB storage so I formatted it, forgetting that my recovery file was on the internal SD card.... and when I tried to reboot my phone it just stays at the blue SAMSUNG logo. Now I cant try to recover the phone and I also can't flash through odin because my phone isnt recognized by the computer whatsoever. SOMEONE HELP.
BryceBrutalityX said:
Is there a possible way that someone can send me a recovery file for cwm that I can flash from an external SD card? My phone wasn't mounting to USB storage so I formatted it, forgetting that my recovery file was on the internal SD card.... and when I tried to reboot my phone it just stays at the blue SAMSUNG logo. Now I cant try to recover the phone and I also can't flash through odin because my phone isnt recognized by the computer whatsoever. SOMEONE HELP.
Click to expand...
Click to collapse
try to uninstall your drivers and reinstall, check my links on my signature links for the Gnote page i have driver listed there
-there are odin package listed on the Gnote page
-try diff usb port on you pc
-try diff cable
-try diff computer if possible
you will need to put your phone in download mode, holding down power and vol down button...
http://forum.xda-developers.com/showpost.php?p=28040353&postcount=1
And don't forget we have a 1 click rom installer if you get your pc drivers installed.
rangercaptain said:
And don't forget we have a 1 click rom installer if you get your pc drivers installed.
Click to expand...
Click to collapse
i miss that....whatcha mean sir...
rangercaptain said:
And don't forget we have a 1 click rom installer if you get your pc drivers installed.
Click to expand...
Click to collapse
edit
XDA is no longer worth my time.
bigjoe2675 said:
try to uninstall your drivers and reinstall, check my links on my signature links for the Gnote page i have driver listed there
-there are odin package listed on the Gnote page
-try diff usb port on you pc
-try diff cable
-try diff computer if possible
you will need to put your phone in download mode, holding down power and vol down button...
http://forum.xda-developers.com/showpost.php?p=28040353&postcount=1
Click to expand...
Click to collapse
I know that I have to get it into download and use ODIN to flash the firmware on there o fix it, but the problem is that computer refuses to pick up my device while its in download mode, and yes I have reinstalled drivers. I have also tried different cables and different ports on my computer. Nothing seems to work.
same problem
TimOster said:
IF when you go into download mode and plug in USB (w/Kies running), it tries to connect....Use Tools/Firmware upgrade and Initialization
That pretty much wipes everything and does a fresh install....of the current ROM which is now ICS.
Click to expand...
Click to collapse
i am trying this method sir, but its asking for serial no and model, i refered from back of my battery and i enterd nut it said to refer it again:crying:
has to be all caps
Mine did the same thing... I called Samsung and walked me threw a hard reset. Check my last post in the general section and the steps are in my post. Only bad thing is u loose everything but u get our phone back....
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!! (still have SuperSU app but doesnt work or gets uninstalled)
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!! Downloaded latest Kies and had it closed from task manager and all its related apps off too but Still odin wont recognize it in download mode!! been tryin since i did the Darn UPDATE! PLZ HELP :S
sohaib770 said:
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!!
>>>>>Of course you lost root .
(still have SuperSU app but doesnt work or gets uninstalled)
>>>> Root the phone again .
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!!
>>> Phone is supposed to be on and in download mode not off to use Odin .
Possible failed OTA update as per multiple posts due to root not removed .
Leading to USB on phone not recognized try a factory reset first .
jje
Click to expand...
Click to collapse
JJEgan said:
sohaib770 said:
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!!
>>>>>Of course you lost root .
(still have SuperSU app but doesnt work or gets uninstalled)
>>>> Root the phone again .
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!!
>>> Phone is supposed to be on and in download mode not off to use Odin .
Possible failed OTA update as per multiple posts due to root not removed .
Leading to USB on phone not recognized try a factory reset first .
jje
Click to expand...
Click to collapse
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
sohaib770 said:
JJEgan said:
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
Try Odin 3.04
sent from here, there, somewhere!!
Click to expand...
Click to collapse
reinstall drivers, try a different usb port. if using a desktop, use the ports on the back of the PC
Sent from my GT-I9300 using xda premium
sohaib770 said:
JJEgan said:
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
Plz Respond someone....
Click to expand...
Click to collapse
THAnks!!!!!!!!!!! Shifting usb to back of computer worked!!! U SAVIOURS THANKS A LOTT!!!!
Galaxy S3 not being recognized in odin in download mode
Could someone please assist.
My rooted Galaxy S3 phone (FW v4.1.2) is stuck at the Samsung startup screen after installing a font app from the app store
To resolve I have tried:
1. The recovery screen - doing a factory reset and reboot
2.. Reflash through ODIN.
I can get get the phone into download mode but ODIN will not recognize the phone in Download mode (Funny that phone is recognised by Odin at the stuck Samsung boot screen)
- I have unistalled and reinstalled KIES and USB drivers
- I am using the stock USB cable
- Tried different USB ports on computer
- Tried on different computers
The problem may be Windows driver related. Because phone gets stuck at the Samsung startup screen, all processes of driver installation do not conclude successful. "MTP USB Device" shows error in Windows Device manager, USB composite deivce.
Uninstalled and reinstalled these a couple of times without success.
Please assist
Issues with usb on s3
Actually fixed my own Question....
My phone was in download mode and was not being recognized by my computer my windows 7 computer. I pressed the usb icon, where a box popped up saying that there was an unknown device. You could find this in device manager.
I then went to device manager to update the driver instead of pointing the device directly to the driver when i clicked browse my computer for software then it shows a location and option to let me pick from a list of device drivers on my computer then a box pops up showing model above that there is a little check box uncheck that two boxes will appear with manufacturer and model
Scroll samsung electronics and model samsung mobile composite device that is what you want to update the driver to...
I pulled the battery then re-entered download mode and windows to over installing the rest now it works fine. I would attach images but it will not let me for some reason. if anyone can help with that I will do it later.
THIS COULD POSSIBLY help with devices not being found on computers in bootloader or just on rom loaded and running..
Skywatcher1 said:
Could someone please assist.
My rooted Galaxy S3 phone (FW v4.1.2) is stuck at the Samsung startup screen after installing a font app from the app store
To resolve I have tried:
1. The recovery screen - doing a factory reset and reboot
2.. Reflash through ODIN.
I can get get the phone into download mode but ODIN will not recognize the phone in Download mode (Funny that phone is recognised by Odin at the stuck Samsung boot screen)
- I have unistalled and reinstalled KIES and USB drivers
- I am using the stock USB cable
- Tried different USB ports on computer
- Tried on different computers
The problem may be Windows driver related. Because phone gets stuck at the Samsung startup screen, all processes of driver installation do not conclude successful. "MTP USB Device" shows error in Windows Device manager, USB composite deivce.
Uninstalled and reinstalled these a couple of times without success.
Please assist
Click to expand...
Click to collapse
have you got the necessary drivers also you need to stop all kies activities.
uable to see added message inn download mode
tian105 said:
reinstall drivers, try a different usb port. if using a desktop, use the ports on the back of the PC
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
uable to see added message inn download mode!!!!!!!!!!
Please help
Maybe solved it
Hey guys, i know it's a bit late now, but i had exactly the same problem with my gt-i9300 (got stuck on samsung splash screen and odin didn't recognize it in download mode) and just realised that everytime, i connected my phone to my PC in download mode, a message would appear that "Gadget Device" (or something like that) was connected. Then i searched in my device manager for the name of it (i found it under USB-Devices) and uninstalled the driver of it. As i connected it again with odin started it would install the driver automatically and *swoosh* odin recognized it.
A year and some later after the last post and I seem to be having this problem as well... I believe it was due to a bad flash at very low battery level which ended up in encryption failure ya da da, factory reset, clear/format everything and flash custom rom from SD because any other connection would not work.... then managed to get windows (many flavors inc. 7, 8 and 10) to connect as MTP or in USB debugging mode but Odin mode (download) just won't do anything... i put the phone in DL mode, nothing happens, no windows connection sounds, no changes in devices manager, even when searching for new hardware. I'd be very interested to know if anyone has had anything like that. I'd really like to flash stock to go back to a custom rom, flash twrp to replace cwm but all seems to no avail if i can't get a connection while in DL mode.
tried to install adb fastboot but also nada since no connection is being made.... might be something with DL mode gone awry with the bad flash... long story but OTA update from current ROM decided on its own to push update even though battery was at 5% and no user interaction ever happened...
we'll see what happens...
after replacing mainboard of my s3 gt-i9300 my computer doesn't recognize phone at all in download mode but in while phone is on
mtp works fine via usb
please help
Are you using the original Samsung USB cable when the phone is in download mode?
romeeoo said:
after replacing mainboard of my s3 gt-i9300 my computer doesn't recognize phone at all in download mode but in while phone is on
mtp works fine via usb
please help
Click to expand...
Click to collapse
Driver issue. Find the correct drivers.
Beamed in by telepathy.