Hi thanks for looking.
I'm a new register and newbie to rooting. And I'm currently following
[ROOT ICS L9 GUIDE] Root ICS with New Lelus method & Offline Flash [11-Mar] guide.
http://forum.xda-developers.com/showthread.php?t=2173465
Unfortunately, I'm a new user register so I can't post on that message thread. So, I was instructed to post my question here.
So, I'm following the guide word-for-word from steps 0 - 8 and now I'm up to the part where it says to "When done, REMOVE USB CABLE AND POWER OFF THE PHONE."
Okay, now question:
[Q]1: For step 9a and 9b. When do I actually perform these steps:
So, currently my USB cable is removed and the L9 is power off from the above step in STEP8.
9A. says to Add lines in "hosts" file as mentioned in step 1 of this post.
So, I'm going to assume that I add the Hex-Edited BIN file and related KDZ file that I've downloaded in STEP1.
But where do I add said lines to?
[Q]2: okay so for step 9b. Start "SmallServer" as mentioned in step 2 of same post.
Where is this "SmallServer?"
In step 2 of the same post, I've already Downloaded Root_and_Flash_Guide_byCMahendra(date).zip file (attached with this post) and extract in your C-Drive.
and gotten three folders named "C:\RootLelus" and "C:\RootFlash" and "C:\shttps"
[Q]3. Okay, now that I'm just advance reading to STEP10 that asks to follow Steps 3-10. Does that mean now I have to reconnect my phone back to the PC from STEP8 and go through the steps 3-10 again, since I've already gone through it the first time around.
[Q]4. the Actual Magic.
So, which LG UPDATE TOOL is the step 11 referring to? Is this when I'm installing the driver to my PC in Step 3? Or is said LG UPDATE TOOL sometime during step 4-8?
Sorry, for all the confusing NEWBIE questions. I'm just trying to follow all the steps without bricking my new phone.
Thank you in advance for your patience and assistance.
-Peter Wong
[Q]1:
It says follow "step 1 of this post" ; Those words are actually a link to a second thread which is this one:
http://forum.xda-developers.com/showpost.php?p=36351786&postcount=1
[Q]2:
See above link in Q[1]
[Q]3:
Please read the link in Q[1] and then ask the question again if still don't understand
[Q]4:
Same response as in Q[3]
Protomartyr said:
[Q]1:
It says follow "step 1 of this post" ; Those words are actually a link to a second thread which is this one:
http://forum.xda-developers.com/showpost.php?p=36351786&postcount=1
[Q]2:
See above link in Q[1]
[Q]3:
Please read the link in Q[1] and then ask the question again if still don't understand
[Q]4:
Same response as in Q[3]
Click to expand...
Click to collapse
OMGaawwdd, I'm such an idiot, I totally didn't click on that link. Thank you very much.
No problem!
OKay, sorry... another question.
So, I'm now flashing with the PHONE UPDATE TOOL and after going through all the steps and the 'MAGIC' swap. My phone reboots and when it turns on I get an error message:
[Driver Software Installatior
Device driver software was not successfully installed
Please consult with your device manufacturer for assistance getting this device installed.
OMAP4430 Device unplugged]
Please let me know what I did wrong and at which point in the process do I need to repeat all the steps again to root my phone.
Do I go back and use the [GUIDE] FLASH L9 Factory ICS/JB ROM WITH OFFLINE FIX + UNBRICK
http://forum.xda-developers.com/showpost.php?p=36351786&postcount=1
And start with STEP7 and rerun the PHONE UPDATE TOOL and MAGIC swap?
Thanks in advance.
Hmm I remember getting a driver installation error when trying to put the phone into 'software upgrade mode'. In my case, I held the 'volume up' button down and plugged the USB cable into the phone. Then I got the error notification that the OMAP driver didn't install. Yet right after this, another set of drivers installed (I'm guessing the computer took a minute to recognize the different mode of the phone?). These new set of drivers installed successfully and I was able to root with no problems.
tl;dr I disregarded the OMAP error, and rooted just fine with no problems
Have you checked if you got root after flashing? If you do have root, then you should be fine.
Protomartyr said:
Hmm I remember getting a driver installation error when trying to put the phone into 'software upgrade mode'. In my case, I held the 'volume up' button down and plugged the USB cable into the phone. Then I got the error notification that the OMAP driver didn't install. Yet right after this, another set of drivers installed (I'm guessing the computer took a minute to recognize the different mode of the phone?). These new set of drivers installed successfully and I was able to root with no problems.
tl;dr I disregarded the OMAP error, and rooted just fine with no problems
Have you checked if you got root after flashing? If you do have root, then you should be fine.
Click to expand...
Click to collapse
Protomartyr,
Ohhh..so that error message isn't the cause of my phone not being able to successfully root, huh? No, my phone still isn't rooted. Basically when my L9 is successfully rooted is when all default icons on my phone are gone right?
So, a couple new questions then.
[Q]1: Okay, I know when it's time to flash you have to hold down the volume button and then plug in the USB cable into the phone. How long do you hold the volume button down? I hold the button down until the phone turns out with the S/W flashing message and then I let go. Do, I need to hold down the button throughout the whole flashing process?
[Q]2: How can you tell if the phone is rooted? Does it look different?
I'm guessing my phone is still haven't been rooted and I'm only getting this error message.
[Driver Software Installatior
Device driver software was not successfully installed
Please consult with your device manufacturer for assistance getting this device installed.
OMAP4430 Device unplugged]
So, if the above error message isn't the cause of my failed rooting. At which step do I go back and reattempt to root my phone?
Do I go back and use the [GUIDE] FLASH L9 Factory ICS/JB ROM WITH OFFLINE FIX + UNBRICK
http://forum.xda-developers.com/show...86&postcount=1
And start with STEP7 and rerun the PHONE UPDATE TOOL and MAGIC swap?
You wouldn't see a difference once you rooted right off the bat. You should see the SuperSU app in your apps list if you followed the procedure. However, having the SuperSU app doesn't mean you are rooted (SuperSU binaries must be installed as well and this requires super user privileges).
To check if you have rooted successfully, the best way is to just download 'Root Checker' here (Click Me for Link)
Once you install Root Checker and open it, you should see a notification asking for Root Checker to get super user privileges. Accept the notification and you should see 'Root successful' or something along those lines.
Let me know if Root Checker says 'successful' or not, and maybe we can troubleshoot after that?
Protomartyr said:
You wouldn't see a difference once you rooted right off the bat. You should see the SuperSU app in your apps list if you followed the procedure. However, having the SuperSU app doesn't mean you are rooted (SuperSU binaries must be installed as well and this requires super user privileges).
To check if you have rooted successfully, the best way is to just download 'Root Checker' here (Click Me for Link)
Once you install Root Checker and open it, you should see a notification asking for Root Checker to get super user privileges. Accept the notification and you should see 'Root successful' or something along those lines.
Let me know if Root Checker says 'successful' or not, and maybe we can troubleshoot after that?
Click to expand...
Click to collapse
Hey Protomartyr,
Cool, my phone installed SuperSU in my apps menu and Root Checker says my phone has been rooted. Now I just need a guide or info on how to remove the bloatware and what I can do with my rooted phone. Thanks for all your assistance and guidance.
peter wong said:
Hey Protomartyr,
Cool, my phone installed SuperSU in my apps menu and Root Checker says my phone has been rooted. Now I just need a guide or info on how to remove the bloatware and what I can do with my rooted phone. Thanks for all your assistance and guidance.
Click to expand...
Click to collapse
No problem. Congrats on getting root :highfive:
As far as removing bloatware safely is concerned, you might have to ask someone else (I'm still a newbie at these things). You can remove/disable them using Titanium Backup (from the app store). Proceed with caution though, as you don't want to remove an app that the phone needs to function. From what I hear, it's safer to just disable unneeded apps (though even then you must tread carefully). Titanium Backup is also useful for backing up all your apps/system apps/user data.
As far as what you can do with root...well that's like asking how many drops of water are in the ocean You can fully customize your phone and even install a new ROM; just naming a few. You can get a better picture of what people are doing with their phones in this thread [Click Me] as well as the other LG L9 threads.
Enjoy!
Lg Optimus L9 p76910g 4.0.4
I want too know if the T-mobile lg optimus L9 can be rooted my specific device is in the picture attached i read through the forum and could not understand if there was a for sure way to do so. I have rooted and flashed my LG optimus net from net 10 To arearom Q So following instructions on how to root my exact device would help alot if anyone could direct me too another thread.
Thanks,
Domonick5150 said:
I want too know if the T-mobile lg optimus L9 can be rooted my specific device is in the picture attached i read through the forum and could not understand if there was a for sure way to do so. I have rooted and flashed my LG optimus net from net 10 To arearom Q So following instructions on how to root my exact device would help alot if anyone could direct me too another thread.
Thanks,
Click to expand...
Click to collapse
According to your screenshot, you have the P769 running firmware 10g
You can root this device using the method described in this thread.
Thanks again for everything Protomartyr,
You've been really helpful. Okay, another question. So, now that I've rooted my phone. Do I now go back and turn on the Lookout Security Antivirus, that I've had to turn off during the rooting process steps? Or would I need to allows need to leave it off to keep my root active?
peter wong said:
Thanks again for everything Protomartyr,
You've been really helpful. Okay, another question. So, now that I've rooted my phone. Do I now go back and turn on the Lookout Security Antivirus, that I've had to turn off during the rooting process steps? Or would I need to allows need to leave it off to keep my root active?
Click to expand...
Click to collapse
You can re-enable Lookout after you root.
one more question
Do you believe that this will be the only rooting method released?
Domonick5150 said:
Do you believe that this will be the only rooting method released?
Click to expand...
Click to collapse
As far as I know, this is the only method available at the moment; but I'm a newbie so don't take my word as the golden truth
thanks
Well you helped me out it's just i read tgat thread & it said 10 g india version with USA t-mobile un-tested So idk.
Domonick5150 said:
Well you helped me out it's just i read tgat thread & it said 10 g india version with USA t-mobile un-tested So idk.
Click to expand...
Click to collapse
Could you point out exactly where it said this? I re-read the thread and couldn't find it.
Related
Hello everybody!
I am starting this new thread to try compile a simple to follow and reasonably written complete guide for rooting an Xperia Neo 2.3.3. I am doing this because, although there are enough information and software on this forum and on the internet in general, these are not really structured and gathered in a way that a non-experienced user (a.k.a. "noob") can easily manage, and the process of rooting 2.3.3. is a bit more complicated than 2.3.2 with Gingerbreak for instance.
This guide is for Xperia Neo running Android 2.3.3 with locked bootloader. Other devices with 2.3.3. might be rooted in a similar fashion.
Update: 2.3.4. for the Neo is out. Everything here still works as described with the difference that you get the latest 2.3.4 when updating OTA.
WARNING: some users reported that after downgrading from 2.3.4 to 2.3.2 in order to root, the battery meter showed 0%. I am not yet aware of a solution to this problem. So beware if your Neo already has the latest version.
Warning: Neither myself, nor anyone else but YOU is responsible if you damage your phone in any way or lose any information after trying to root your phone by folowing this guide! Also note that your warranty will expire when you root. However, unrooting should be possible, in principle.
--- Guide start ---
1. Back up your data. You could do this using an app called Backup Master from the Android Market. Additionally, I had my contacts and calendar synchronized with my Google account. SMS messages were not properly backed up, but I didn't care about them anyway. If you do care, you might want to save them to your SD card, using the built-in option or just use another app. Also make sure your battery is at least half charged before starting.
2. Download FlashTool from here or directly here. Install it by simply unpacking it somewhere.
3. Download the generic firmware 2.3.2 from here or directly here. You do this because Gingerbreak (will come to that) uses a security vulnerability to gain root rights in 2.3.2. that has been fixed with the new 2.3.3. Extract the .ftf file from the .rar archive you just downloaded to the sub-folder "firmwares" of your Flashtools installation from step 2. (You might need WinRar for extracting)
4. Go to your Flashtool installation to the folder "drivers" and install ggsetup-2.2.0.10.exe. Download the USB drivers for your Neo from here. Unpack the contents of the archived folder "amd64" (if on Windows 64) or "i386" (if on Windows 32) to the folder "amd64" or "x86" respectively of the installation folder of Gordons Gate. The path might be something like "c:\Program Files (x86)\Sony Ericsson\Gordons Gate\". Run DPInst.exe to install the drivers.
Alternatively to this step, I think you could install the drivers by just installing PCCompanion and plugging in your phone, but I did it the hard way.
5. Run the file X10FlashTool.exe; click Flash; you should see the firmware you downloaded in step 3 in the appearing window if you extracted it correctly; click OK (I recommend you leave the option "wipe data" checked, although some users reported that it worked for them even without wiping the data); follow the instructions (note that the back button on the Neo is on the other side as pictured); the flashing should take no more than a couple of minutes; start your phone - this will take a bit longer the first time. If after the reboot the battery meter is showing 1%, shut down and take out the battery for a minute, then boot up again.
6. Get Gingerbreak from here of directly here. This is the exploit that actually roots the phone. Copy it to your phone and install. You can do this a number of ways. For example: install ES File Explorer from the Android Market, access your PC via WLAN with it and install it directly from there. You will be prompted to change the setting to allow the installation of apps from unknown sources in case you didn't change it already. Also allow USB-debugging in the same settings menu under "developer".
7. Run Gingerbreak and tap "root device". This shouldn't take more than a couple of minutes, although some users reported it taking hours. If it is taking very long, you might want to try inserting another SD card and repeating the attempt. When it's done, it will reboot. Now you have a rooted 2.3.2. You can check this by installing the app "root checker" from the Android Market. When you start "root checker" you will be asked by an app called "superuser" if you want to grant root access to this program. This "superuser" app was installed by Gingerbreak after rooting and manages which program has root permissions.
8. Now before doing anything, go to settings>info>software update> update now and get the new Android 2.3.3 OTA (= over the air, i.e. via WLAN or 3G). Do not do this via your PC, because you will unroot the phone. There have been a lot of problems reported with this step. If right after you tap "update now" you get the message "unable to connect" try shutting down, waiting a minute and booting up again or also try setting the date and time to the correct values, in case you have something like 01 Jan 1980. Other users said, it just took a lot of attempts before it worked and that the problem might be with the SonyEricsson servers... If after the update was downloaded you get some kind of error message like "cannot update" it might be because you did some changes to system files or possibly you used a non-original firmware in step 3.
After the update was done, check again for root access with the "root checker"
9. Restore the data you backed up in step 1 and enjoy.
Update: I managed to update to 2.3.4. Unfortunately I could not simply update OTA from my rooted 2.3.3. I kept getting an error message after downloading the update, probably because I had changed system files. So I did all the above steps again, with the difference that in step 8 I got the 2.3.4. from the SE server.
--- Guide end ---
Please click the Thanks button and/or reply to this post and write your own experience or suggestions/corrections.
A similar guide/tutorial/how-to has been posted before (Here). Perhaps not as detailed as yours but nonetheless, it's been done. And do give credit to the necessary people.
But good job on taking the time and writing this up. I'm sure a lot of Neo users will appreciate it.
Cheers!
xtacy! said:
A similar guide/tutorial/how-to has been posted before (Here). Perhaps not as detailed as yours but nonetheless, it's been done. And do give credit to the necessary people.
!
Click to expand...
Click to collapse
Actually, I did link directly to the thread you wrote, because it was one of my starting points. And to be rigorous, the steps enumerated there are from here, but with the firmware for Neo. The real credit goes to the programmers of Gingerbreak, Flashtool etc.
Like I said, I was just gathering information and detailing them, I don't take credit for anything other than taking the time to write the post.
Yup, I had actually included that initially i.e. that most of us already know these steps from the original thread but then wanted to give you credit for doing what you did.
And when I said give credit where it is due, I meant the actual people behind the programs and kistigun for his tutorial.
guys after i root my neo according to this guide the ota firmware i get will be unbranded? right?
By the way thanks for the guide, i might use it one day after i gain more knowledge about those things...
If you've flashed the generic firmware, then yes, you would be unbranded BUT you will still be locked to your network until you purchase the unlock key.
Unbranding would remove all your network specific apps (part of bloatware).
marcindpol said:
guys after i root my neo according to this guide the ota firmware i get will be unbranded? right?
By the way thanks for the guide, i might use it one day after i gain more knowledge about those things...
Click to expand...
Click to collapse
An OTA update won't remove the branding, but flashing will. It's what I describe in step 5.
I was just like you a couple of days ago, but I managed to learn all this over the weekend and did all I described here. (and a few things more ) Don't rush into it. Read everything coherent and helpful you can find first.
xtacy! said:
If you've flashed the generic firmware, then yes, you would be unbranded BUT you will still be locked to your network until you purchase the unlock key.
Click to expand...
Click to collapse
Thanks for the info. I didn't have any network locks or branding on mine, but it's good to know that for future reference.
Vorsprung said:
An OTA update won't remove the branding, but flashing will. It's what I describe in step 5.
I was just like you a couple of days ago, but I managed to learn all this over the weekend and did all I described here. (and a few things more ) Don't rush into it. Read everything coherent and helpful you can find first.
Click to expand...
Click to collapse
ok i think i understand now, but just to clarify:
if i flash generic (unbranded?) and then do the OTA or Pc Companion update, the update i get will also be unbranded?.
also will all the future updates be unbranded too?
Another question: since my neo is Irish Vodafone branded phone, which generic software i should flash in step 5?
Thanks a lot for help and please do not get annoyed by my questions as i am totally noob when it comes to those things, also sorry for my poor English...
marcindpol said:
ok i think i understand now, but just to clarify:
if i flash generic (unbranded?) and then do the OTA or Pc Companion update, the update i get will also be unbranded?.
also will all the future updates be unbranded too?
Click to expand...
Click to collapse
The answer should be yes to both questions. Once you've debranded your phone, it will not get "rebranded" (except if you flash it with a branded firmware). The generic firmware linked here is of course without any branding.
marcindpol said:
Another question: since my neo is Irish Vodafone branded phone, which generic software i should flash in step 5?
Click to expand...
Click to collapse
You could use the generic one, but you will lose the branding. I'm guessing you don't have a problem with that.
marcindpol said:
Thanks a lot for help and please do not get annoyed by my questions as i am totally noob when it comes to those things, also sorry for my poor English...
Click to expand...
Click to collapse
You're welcome! I'm not exactly experienced myself, so I don't guarantee that my answers are 100% accurate and correct...
I don't think your English is bad at all. Don't you speak English in Ireland?
Can anybody give more details on the branding issue?
Vorsprung said:
The answer should be yes to both questions. Once you've debranded your phone, it will not get "rebranded" (except if you flash it with a branded firmware). The generic firmware linked here is of course without any branding.
You could use the generic one, but you will lose the branding. I'm guessing you don't have a problem with that.
You're welcome! I'm not exactly experienced myself, so I don't guarantee that my answers are 100% accurate and correct...
I don't think your English is bad at all. Don't you speak English in Ireland?
Can anybody give more details on the branding issue?
Click to expand...
Click to collapse
Thanks a lot for the answers
hehe yes people in general speak English here in Ireland but lets not forget there are thousands of emigrants from around the world living here too, i am one of them
Can you please also write which generic firmware should i flash, UK, World or any other? (perhaps there is IE one?), and will it affect the frequency of getting future official updates from SE? (yes i want to get rid of Vodafone from my phone and stay with a 100% SE official firmware).
Thanks
Once you flash a generic firmware, future updates will all be generic updates as well.
Some of the plus points that I can see of having a generic firmware is that
a) updates are rolled out faster (as compared to branded firmware).
b) you get rid of a lot of junk that network providers seem to put in i.e. bloatware.
OK I am now on generic, unbranded Global International 1247-0875_R11C , of course 2.3.3, however I did not root my phone and used SEUS instead OTA.
Thanks a lot Vorsprung and others for help
I just flashed my Xperia Neo 2.3.2 global, applied Gingerbreak, and updated OTA to the last 2.3.3 firmware (4.0.A.2.368)
I confirm I kept root!
Kalram said:
I just flashed my Xperia Neo 2.3.2 global, applied Gingerbreak, and updated OTA to the last 2.3.3 firmware (4.0.A.2.368)
I confirm I kept root!
Click to expand...
Click to collapse
Same here
I follow this guide and got my Xperia Neo rooted! Thanks Vorsprung!!!
I wanted it root to install Google Talk with video! It works very well!
Now I want a way to unlock the bootloader, as I want to run Cyanogen mod
Ask the Admin for your own forum section about the Neo, all this OTA-root with the latest firmware just making me jealous.
flashmode
Hi guys!
well I just can follow till step 5. Opening the "X10FlashTool.exe" --> Click On flash. that's it. It tells me to enter the flash mode but how? I pressed&hold the menu button before plugging the usb cable onto my PC. Instead entering the flash mode it only starts charging my battery. Can somebody help ?
thanks a lot !
i was clicking the wrong button
I have rooted 2.3.2 (checked with rootchecker) but when I try to update OTA it says "Your phone already has the latest software".. Please help!!
Edit: Even says up to date using pc companion.
I already tried everything enabled ADB, everything seems fine, but when i start the root app, everytime it gives me this error
remount failed: operation not permited
failed to copy 'files\su' to '/system/bin/su': Read only file system, what am i doing wrong???
please help me what am i doing wrong i'm on 3.2.1 (release 2) and my kernel is 2.6.36.3 build 8#1 so it's supoused to be exploitable.
Tekkenlord said:
I already tried everything enabled ADB, everything seems fine, but when i start the root app, everytime it gives me this error
remount failed: operation not permited
failed to copy 'files\su' to '/system/bin/su': Read only file system, what am i doing wrong???
please help me what am i doing wrong i'm on 3.2.1 (release 2) and my kernel is 2.6.36.3 build 8#1 so it's supoused to be exploitable.
Click to expand...
Click to collapse
Did you do the Rescue-Backdoor with Condi's AiO Tool
If not then you are getting a red menu and if you already did that
Then maby you could try this:
1. Connect your tab.
2. Enable usb debugging.
3. Open device manager
4. Disable SONY TABLET S
5. Start Condi's 2.7 AiO Tool
6. Choose option 1 for root.
7. Press enter so your device will reboot.
8. look in device manager list and wait until SONY TABLET S re-appears
9. If it appears then you must enable it again and wait for the AiO tool to finish.
YF,
Mahaco.
thanks for answering, no i havent done the rescue back-door, so i should try that first? and then the steps you mention?
but wait don't i need to be rooted first to do the rescue back door?
also when the exploit starts and in the middle of it a meesage in windows apperas saying that it is trying to install MTP USB device and it's unable to install it maybe that's another cause?
pardon my noobinesh but im really getting desperate here.
You were right!!!!! i was disabling the adb device listed NOT the sony tablet S listed i disabled Sony Tablet S and enabled it again in the fist reboot and that did the magic (crazy uh?) thanks so much Mahaco you're a life saver now on to another dumb question now that i'm rooted what? xD
Tekkenlord said:
-Thanks for answering, no i havent done the rescue back-door, so i should try that first? and then the steps you mention?
-But wait don't i need to be rooted first to do the rescue back door?
-Also when the exploit starts and in the middle of it a meesage in windows apperas saying that it is trying to install MTP USB device and it's unable to install it maybe that's another cause?
-Pardon my noobinesh but im really getting desperate here.
-You were right!!!!! i was disabling the adb device listed NOT the sony tablet S
listed i disabled Sony Tablet S and enabled it again in the fist reboot and that did the magic (crazy uh?)
thanks so much Mahaco you're a life saver now on to another dumb question now that i'm rooted what? xD
Click to expand...
Click to collapse
Nice to hear you made it! You gave me a smile for that lol
Okay now try the rescue-backdoor,
Follow these steps carefully, be patient, if you have downloaded the update 3.2.1.r2
then don't install!, This will probaly change your kernal version and you will not able to gain root anymore!
So if you downloaded the update the AiO tool will go on,
if you have finished that, some values are changed and you are able to do the steps from Condi's ICS steps ( In Blue )
i must remind you even how silly it sounds, with switching you External SD from your tab to your pc
then don't forget to put it back before you continue, this wont brick your device but it can cause problems
and you have to re-do all the steps which is quite frustrating if you are stressed about bricking your device,
And last but not least, don't change your region thats not nessesary just follow the steps and you will get true
thanks i will try everything i can, i just wanted to ask what do you mean by if i downloaded the update 3.2.1 r2 you mean if i downloaded it from the internet then i can't do the ICS and rescue-back door thing?
because yes i updated the tablet via internet form an original update, thanks for the patience you have and the help; me i'm a total noob.
Tekkenlord said:
thanks i will try everything i can, i just wanted to ask what do you mean by if i downloaded the update 3.2.1 r2 you mean if i downloaded it from the internet then i can't do the ICS and rescue-back door thing?
because yes i updated the tablet via internet form an original update, thanks for the patience you have and the help; me i'm a total noob.
Click to expand...
Click to collapse
No the AiO tool will atomatic start the download 3.2.1.r2 on your tab nothing more just try the rescue backdoor and you will find out after you have proper driver installed
succes
i'm already in ICS and i can say it's quite nice and all, thanks again mahaco for all the help provided, and with another silly question, how can i gain more access to other apps now that im rooted? i use the condi's tool to install google market place modded or what?
Tekkenlord said:
i'm already in ICS and i can say it's quite nice and all, thanks again mahaco for all the help provided, and with another silly question, how can i gain more access to other apps now that im rooted? i use the condi's tool to install google market place modded or what?
Click to expand...
Click to collapse
Thats something you have to find out on condi's page thats not my part,
I'll PM you about something what you can do with Root access in combination with Rom Tool Box Free,
EDIT>
Be carefull with deleting system apps, there is a high chance that you ruïn your tablet,
so think twice before you uninstall an system app,
Don't try region changer still not supported i think,
I installed the modded version in HC but it didn't worked for me so don't know that
Hello everyone.
Forward
Originally, I was going to flash my Droid X2's MEID to my LG OpZip's MEID and use the X2, but found out when I got home, it had to be unactivated, and I was already activated, so that plan went down the drain. I've spent the last, oh, 2 or 3 days trying to root, install a custom rom, and expand my internal storage to no avail. After doing alot of research on the issue in regards to rooting it, I found (on another site I think) that my sw version is not the same as the other OpZip's that have been rooted, and to all of my research, I cannot seem to find anything that matches my model and sw version.
Phone Information
Phone: LG Optimus Zip
Model: LGL75C
SW Version: LGL75CV1
Android Version: 2.3.4
Provider: Straight Talk (Verizon towers)
Things I've Tried
Super One Click
ADB
LG Optimus Zip One Click (different sw version)
Alright, now for the part I need assistance with... Does anyone know a root method for this phone? Are there any custom ROM's that are compatible, or am I overthinking it, and should assume most are compatible?
I look forward to any and all responses, and thanks in advance.
Ori
Bump. Don't generally like doing that, but I'm desperate to find an answer.
Bump x2
Orito said:
Bump. Don't generally like doing that, but I'm desperate to find an answer.
Click to expand...
Click to collapse
I'll second that bump. The model of this phone is VS700 - But many report that root attempts are unsuccessful because of the SW version.
Interestingly enough, when trying to use LG update software on my PC, it says the LGL75CV1 is indeed on the supported device list for updates, however when the LG software tries to read the SW Version from my phone, it says ERROR. I call up LG, they say all updates should be done through Tracphone.
Is there something different about the file system? are developers somehow locked out of this? Any update would be great. The phone has potential, alot of potential. Lets get it rooted guys!
bump
a friend of mine has this phone with this sw version (lgl75cv1) and is chomping at the bit for me to get it rooted for him. if anyone, anyone at all, has any info please speak up.
thanks guys
I was able to root this phone today easily using this thread referred by a user at another forum.
I can't post a link but the instructions are at androidforums under a thread called "Finally rooted M865c for Straight Talk"
It works fine for the LG Zip LGL75C 2.3.4
It was a very simple process. I am now looking for a way to install a clockworkmod recovery on the phone to make a backup. Anyone have any insight on how to install the correct CWM please advise.
LGL75c Optimus Zip
Everywhere i look it says this phone cannot be rooted because it has a locked bootloader. I even went as far as paying root android for the software which they assured me would root this phone. It failed miserably.
I am looking for anything that will help me root this phone as I want to tether the 3g to my nexus 7 tablet, to have internet wherever I go with my tablet.
How to root LGL75C
I just managed to root my LGL75C (provided by Straight Talk).
Download 2 files:
Poot .apk: sharesend. com/qe9jl6ij
Ministroll .apk: sharesend. com/8orgvw4r
EDIT: Since I'm a new user, this forums board won't let me link to the apk files. Sorry :\
Step 1:
Download the Poot-debug.apk and Minstro-ii.apk and place the 2 files in the root of Your SDCARD.
Or put both files somewhere on /sdcard and open the files via file manager/explorer.
Step 3:
Install both the Poot-debug.apk and ministro-ii.apk. (You will need to make sure that you have enabled "Unknown Sources" under the application settings menu of your phone before you will be able to install these apks.)
Step 4:
After both apks are installed open Poot. It will open up ministro-ii and download quite a few libraries that are necessary for the Poot to work. Once it has completed click the button that says, "Press here to poot", and hope for the best.
Step 5:
Pay attention the the messages displayed on the screen. Most messages should start with a
, but you should see a couple of [-].
As long as the only warning messages you receive are the following, you should have successfully rooted.
Code:
[-]current && current != last + 1: 0000ffff 0000ffff
[-]Haxx has run its coarse. Reboot the device to play again
A demon materialized while pooting. Error code: 64
You will receive these messages because Poot does not recognize the M865c kernel and is unable to clean things up without rebooting.
Again, the three warnings listed above are nothing to worry about.
Step 6:
Reboot your phone to save changes and allow the exploit to take effect.
Step 7:
Open Poot and click on the button that says Built-in rootcheck to verify that your phone is rooted. As long as Poot is able to find 'su,' and it will display its path along with a corresponding message stating success.
Step 8:
You'll probably want to download/install a Superuser app from the App Store/Google Play store, so you can give other apps su privs.
Click to expand...
Click to collapse
Tried to root LGL75C -- got "didn't find symbols" message
lokicode said:
I just managed to root my LGL75C (provided by Straight Talk).
Click to expand...
Click to collapse
Help! I have NO experience with this stuff. I used this method, but after I pressed "Press here to poot" I go the messages "[-] didn't find symbols" and "A demon materialzed while pooting. Error code: 20 su binary was not written." Huh? I tried rebooting and then pressing "Build-in rootcheck," but the message I got back was:
Path is:
"/sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin"
no su was found in $PATH
Any idea what this means? I'm so clueless.
lcl75c recovery custom roms ?
I have rooted my lgl75c and got recovery to work by a method for lgl55c but I can't find any custom roms. Has there been any made?
idk
i rooted my lg optimus zip and i want to wireless tether it but none of the apps work. what do i need to do to share a hotspot? i am rooted successfully and have android 2.3.4. please help? if you have answers please email me [email protected]
Mayhem96 said:
i rooted my lg optimus zip and i want to wireless tether it but none of the apps work. what do i need to do to share a hotspot? i am rooted successfully and have android 2.3.4. please help? if you have answers please email me [email protected]
Click to expand...
Click to collapse
Pda net works on mine but they will shut your data off till the next pay period if you use it very much they must be able to still tell its a computer some how even though it still its supposed to go through your phones browser. I don't even use it anymore. The version I have I bought before it was on playstore I imagine they are the same but you have to install it on the computer to and have the drivers for the phone.
why wont the touch screen work on my lg lgl75c
I'm new to this whole Android scene, been an Apple user my whole life. I know the ins and outs of iOS and jailbreaking, but i can't figure out how to root my device for the life of me!
I've looked through Google and found this (bin4ry's recovery), which picks up my device, and I get the screen on my phone saying restore, which I click. Then it comes up with "Starting restore", before coming up with "Restore ended" a few moments later. After that the program just sits there, obviously failing to root the device.
I've also read through this thread but didn't understand any of it, and attempts to follow instructions given were all dead ends
Any help would be much appreciated.
Cheers
What type of phone, and what android version..?
Miniricho said:
What type of phone, and what android version..?
Click to expand...
Click to collapse
Alcatel OT-993
Running Android ICS 4.0.4
Ultim8um said:
Alcatel OT-993
Running Android ICS 4.0.4
Click to expand...
Click to collapse
Have you tried cd (change directory) into the folder where your bin4ry restore is located?
Commonly happens to most phones, there's a video on the site where you download it from.
Also that russian page is for installing CWM (clockworkmod recovery) And you need to be rooted in order to do that.
Miniricho said:
Have you tried cd (change directory) into the folder where your bin4ry restore is located?
Commonly happens to most phones, there's a video on the site where you download it from.
Also that russian page is for installing CWM (clockworkmod recovery) And you need to be rooted in order to do that.
Click to expand...
Click to collapse
Ah that explains why I couldn't follow it. Cheers
Also I presume you mean in the command prompt?
puu(dot)sh/2EfaU(dot)png
Would that be correct? Because that is how I have done it every time
EDIT: This is the step it stops on. puu(dot)sh/2EfpJ.png I click restore on my phone and as stated in the OP it starts and ends the restore instantly
Are you sure your phone is rootable via this method?
Miniricho said:
Are you sure your phone is rootable via this method?
Click to expand...
Click to collapse
Its the only method that comes up when searching for my phone, but no I'm not sure. If you know any other methods that work that would be wonderful
Maybe just try some of the most popular methods like unlockroot, or superoneclick,
if all else fails, make sure your drivers are installed correctly, and keep trying and searching around. Good luck.
Same problem
-Ran the latest version of Bin4ry on my Alcatel OT-993 running unrooted Android 4.0.4.
-The script seems to run correctly and I'm able to click the Restore button but it wont reboot the the phone.
-When I manually switch of the phone it displays that the script was successful and says its waiting for the device to reappear.
-When the phone is switched on again the script finishes but says im not rooted
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Once you select Option 1, you need to go back to the main windows to uncheck one box (F something) and then click start before it does the rooting. I missed it yesterday also and just keep waiting until I realized there was a step I didn't do.
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Delete the root toolkit, restart your computer and download it again. Same thing happened to me :thumbup:
Sent from my SCH-I545 using xda app-developers app
Help!
I am having the same problem and my phone is sitting there with a large android icon and message reading "Downloading.. Do not turn off target!!" I am afraid to disconnect the phone from the USB. What should I do?
ThugosaurusRex said:
Delete the root toolkit, restart your computer and download it again. Same thing happened to me :thumbup:
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Same here, Verizon Samsung g s4.
I followed the instructions: unchecked the F. reset box, and selected tar and clicked start. The "<OSM> All threads completed. (succeed 0 / failed 0) line showed up, and nothing else.
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Did you enable USB debugging and third-party? USB debugging can be found by tapping on build number (i think) under about phone like 7 times. Developer options should appear in your settings after that. Third-party sources is under security I believe. Hope that helps!
whichonespink73 said:
Did you enable USB debugging and third-party? USB debugging can be found by tapping on build number (i think) under about phone like 7 times. Developer options should appear in your settings after that. Third-party sources is under security I believe. Hope that helps!
Click to expand...
Click to collapse
I don't mean to hijack any responses here, but seeing as I have the same problem as OP I think it's safe to say that he also enabled USB debugging and third-party sources. Nothing
dabs delicious said:
I don't mean to hijack any responses here, but seeing as I have the same problem as OP I think it's safe to say that he also enabled USB debugging and third-party sources. Nothing
Click to expand...
Click to collapse
I actually found my problem. Even though I had the usb debugging flag set, when I tried to root, a popup window came up in the background asking me to confirm that I wanted to enable usb debugging. Because it was in the background I kept missing it. Once I saw it and replied, everything worked perfectly. Hope this maybe helps someone.
goldberg96 said:
I actually found my problem. Even though I had the usb debugging flag set, when I tried to root, a popup window came up in the background asking me to confirm that I wanted to enable usb debugging. Because it was in the background I kept missing it. Once I saw it and replied, everything worked perfectly. Hope this maybe helps someone.
Click to expand...
Click to collapse
You're talking about the popup window on your phone, right? Because It pops up for me too, and I click "confirm" each time, but to no avail
Does anyone else have any suggestions?
Question about using the 3 in 1 tool
I am wondering a few things. I have the Samsung Galaxy 4 that has not been activated by Verizon yet. I want to use it on Straight Talk which uses GSM. After running this tool with the unlocking and rooting, will I be able to do this?
Super Noob
Hello everyone this is my very first post, I am looking to root my verizon s4 using the one tool kit i dont believe i will have any trouble doing so i have rooted a few phones in my past before, my only question is about unrooting. i didnt want to start a whole new thread for this so figured i would ask here. is the VRUAMDK Factory Image (modified with No-Wipe) that you download from http://forum.xda-developers.com/showthread.php?t=2301259 is that the stock verizon firmware the only thing holding me back from rooting is not being sure that i have the stock firmware to flash, i might mess up and wanna make sure i have that for any situation that might come up. would someone plz confirm that that is the file i want to return to no root stock
missjamie said:
I am wondering a few things. I have the Samsung Galaxy 4 that has not been activated by Verizon yet. I want to use it on Straight Talk which uses GSM. After running this tool with the unlocking and rooting, will I be able to do this?
Click to expand...
Click to collapse
Root just allows you to hack the software on your phone, and the "unlock" refers to the bootloader. It does not unlock the phone for other carriers; this is done (from what I understand) by dialing a specific set of codes, generally provided to you by the original carrier of the phone if you have an account in good standing with them and you tell them you plan on travelling out of the country and need to use GSM. I have never needed to do this and as such only have a minor theoretical knowledge of the subject; I would appreciate it if somebody with more knowledge on this would confirm or deny my suspicion that you are better off trading the phone for an AT&T/T-Mobile one that actually was meant for GSM, or otherwise obtaining one.
JNava420 said:
Hello everyone this is my very first post, I am looking to root my Verizon s4 using the one tool kit i don't believe i will have any trouble doing so i have rooted a few phones in my past before, my only question is about unrooting. I didn't want to start a whole new thread for this so figured i would ask here. is the VRUAMDK Factory Image (modified with No-Wipe) that you download from http://forum.xda-developers.com/showthread.php?t=2301259 is that the stock Verizon firmware the only thing holding me back from rooting is not being sure that i have the stock firmware to flash, i might mess up and wanna make sure i have that for any situation that might come up. would someone plz confirm that that is the file i want to return to no root stock
Click to expand...
Click to collapse
This is the original bootloader; not the stock firmware. You need to flash this after you successfully root, start the phone, start SuperSU, and update the SU binary.
The full stock firmware is rather large and available here:
http://forum.xda-developers.com/showthread.php?t=2289325
might not know as much as i thought
thanks for telling me this first of all, so let me see if i get this right and im hoping you or someone will tell me if im correct or not. The all in one root method does that take care of the whole SuperSu, and update part or do i still need to do that after the root tool does its business? With unrooting do i just need to flash the stock firmware in odin use triangle away and i should be good correct, im not quite understanding the whole thats the original bootloader....the file that downloads is a .tar i thought that was firmware/rom....what do i need the original bootloarder for exactly? I honestly am to the point id be willing to pay someone who has a credible rep to video chat and walk me through it all
If you need assistance. Pm me. If I sm available ill help you.
JNava420 said:
thanks for telling me this first of all, so let me see if i get this right and im hoping you or someone will tell me if im correct or not. The all in one root method does that take care of the whole SuperSu, and update part or do i still need to do that after the root tool does its business? With unrooting do i just need to flash the stock firmware in odin use triangle away and i should be good correct, im not quite understanding the whole thats the original bootloader....the file that downloads is a .tar i thought that was firmware/rom....what do i need the original bootloarder for exactly? I honestly am to the point id be willing to pay someone who has a credible rep to video chat and walk me through it all
Click to expand...
Click to collapse
The original bootloader is locked and doesn't allow for us to use the exploit to install SuperSU and root the phone.
We are installing the unlocked bootloader via Odin...
Then running motochopper to exploit a vulnerability to gain root...
Then MANUALLY (this can't happen automagically) opening SuperSU and updating the SU binary...
Then rebooting the phone to make sure you still have root (personal preference)...
Then re-loading the original bootloader (we don't need the modified one anymore!) via Odin...
Then we are done!
The steps in the how to are very precise and accurate. If you would like to PM me, I am available for another hour or so.
OverkillSD said:
The original bootloader is locked and doesn't allow for us to use the exploit to install SuperSU and root the phone.
We are installing the unlocked bootloader via Odin...
Then running motochopper to exploit a vulnerability to gain root...
Then MANUALLY (this can't happen automagically) opening SuperSU and updating the SU binary...
Then rebooting the phone to make sure you still have root (personal preference)...
Then re-loading the original bootloader (we don't need the modified one anymore!) via Odin...
Then we are done!
The steps in the how to are very precise and accurate. If you would like to PM me, I am available for another hour or so.
Click to expand...
Click to collapse
Well said. Only correction is the bootloader still remains locked. The recoveries included are loki patched. This bypasses the bootloader. All roms and kernels are loki patched so flashing them is safe. This is as close as we're gonna get to an unlocked bootloader for now.
Ah. I was under the impression the bootloader was unlocked. Thanks for the info.
I'm getting an error in Odin: "Cannot open serial port." I have debugger mode enabled and whatnot, any help?
dabs delicious said:
I'm getting an error in Odin: "Cannot open serial port." I have debugger mode enabled and whatnot, any help?
Click to expand...
Click to collapse
I am also coming up with this error. My computer says that device is not responding. I am a first time "rooter" but I read the instructions carefully and now im stuck.....any suggestions?
chrisxstyle1182 said:
I am also coming up with this error. My computer says that device is not responding. I am a first time "rooter" but I read the instructions carefully and now im stuck.....any suggestions?
Click to expand...
Click to collapse
Could be a couple of things first make sure your using the cable that came with your phone. Try switching usb ports. Alsi try rebooting your pc