Howto ROOT/UNLOCK and best rom telus i717d - AT&T Samsung Galaxy Note I717

Hi Looking for a bit more information after reading for a few days on rooting and unlocking and best rom for telus i717d.
Ok 1st off ROOTing, do i really need todo a nocount root on the telus i717d? as a JIG will reset count anyways? i know its easier todo now. on 4.0.4 now so can use the nocount method. Just wondering if the need for odin, or can use sd card to root.
As for unlocking, is there a way for free, I know i can download from marketplace apps for samsung unlocks ( mostly galaxy, some say works others say no--really don;t wanna waste 2 hours than finding out have to buy ) but 90% plus posts here all point to provider or a reseller of unlocking codes......Anything Bell/Telus seems to be around $20 on ebay.....
Also, what is the best ROM to use, CM seems like standard for any android phone, looking for performance and most tweaks.
I also read that the i717d from telus has issues when unlocked keeping APN settings for certain providers ( koodoo for example ) ( is there a known solution for this ? )
Thanks in advance.

You do need odin to root. As far as nocount....it is up to you. But Canadian phones usually require another step in getting the custom recovery to stick. Look here:
http://forum.xda-developers.com/showthread.php?t=1775263
If you want to sim unlock your phone for free then look here:
http://forum.xda-developers.com/showthread.php?t=2124544
Best ROM is whatever works for you. Could be stock, CM, or whatever. 10 people will give you 10 different answers. Best to experience for yourself.
If you want to not have issues with your APN then write it down and you can enter it into the new ROM if not included.

Agoattamer said:
You do need odin to root. As far as nocount....it is up to you. But Canadian phones usually require another step in getting the custom recovery to stick. Look here:
http://forum.xda-developers.com/showthread.php?t=1775263
If you want to sim unlock your phone for free then look here:
http://forum.xda-developers.com/showthread.php?t=2124544
Best ROM is whatever works for you. Could be stock, CM, or whatever. 10 people will give you 10 different answers. Best to experience for yourself.
If you want to not have issues with your APN then write it down and you can enter it into the new ROM if not included.
Click to expand...
Click to collapse
Thanks for the info, didn't see custom recovery to stick issue in my previous research so will read up more on it.
The unlock linked looks easy enough.
I know what you mean about ROM's but seeing as so many out there I guess I will have to play with them each for a while.

Can you flash I717 ROMs on the Telus I717D? I'm having a hard time finding any ROMS to flash on my buddy;s phone. I use Nexus devices, myself so this is never an issue. So far I have rooted his phone, added CWM recovery and SIM unlocked it. I also flashed a baseband from the TMO S2. (Someone in another thread said it works really well for them, and it seems to get good 4G signal, though it also seems to have wifi issues now lol.. but I'll come back to that when I see him again)
Anyway, if you can't flash these ROMS on the Telus variant, can someone point me to any that you CAN flash on it? Thanks!
I must tell him to stick with Nexus phones lol

Related

How do I flash to Verizon compatible ROM?

Currently I have a HTC Touch Pro with Sprint, the ROM has never been changed since I got it, I have modified many things about it but I have never gotten as deep as flashing ROM's. I'd like to do this without bricking my phone so I am sort of paranoid about being careful doing this.
Basically, I am canceling with Sprint and I want to change my ROM to work with the Verizon/Alltel network so I am able to activate it on the PagePlus network. I know there are many things to go through on this forum that probably answer my question.. but I don't know where to start.
Are there already instructions for this somewhere or could somebody give me some? Any help is appreciated.
vap3riley said:
Currently I have a HTC Touch Pro with Sprint, the ROM has never been changed since I got it, I have modified many things about it but I have never gotten as deep as flashing ROM's. I'd like to do this without bricking my phone so I am sort of paranoid about being careful doing this.
Basically, I am canceling with Sprint and I want to change my ROM to work with the Verizon/Alltel network so I am able to activate it on the PagePlus network. I know there are many things to go through on this forum that probably answer my question.. but I don't know where to start.
Are there already instructions for this somewhere or could somebody give me some? Any help is appreciated.
Click to expand...
Click to collapse
You have to unlock your device before being able to flash a rom on it. The flashing and the transferring of the device to another carrier are two separate matters. If I were you (and considering that Verizon tech support are not the smartest, or the brightest), I would leave the device with the stock rom, take it to Verizon, have them add the device to their network, and then unlock and flash a new rom. I have a tutorial on how to flash to other roms (look in my signature), but do it only when you are ready.
Good luck!

[Q] S3 (int) + AT&T - whats the best rom/radio/etc??

Hi,
I have purchased an International S3 and am going to use it on AT&T. I have read through the forums and feel pretty confident about rooting my phone. My question(s) is:
1. Do I need to flash a new ROM to make the most out of AT&T's network, or will the stock ROM work just fine?
2. If its recommended to use a custom ROM which should I use for best compatibility with AT&T? If I must use custom I would like one as close to stock as possible.
Thank you for any/all replies.
Noob-Tard
bumping for great justice!
Anyone?
If this has been cover already please post a link to that thread.
ATT OMEGA 7.0 phone won't turn on anymore
I tried to load Omega 7.0 on my ATT S3 and everything went well until the reboot part. The screen went black and my phone isn't able to turn on now. Any advise would be great. Thanks
Sounds like you have the US version
Sounds like you have the US version, I have the international version but thanks for the info either way.
Anyone have any advice for the best radio for use on AT&T on the I9300? I'm on the latest official stock build taking only OTAs so far, but my signal strength seems worse on this phone than others I've used in the past. (Figured I'd check before I start flashing/testing for a few days)
thread closed. choosing roms is a personal thing. what is best for one person (and phone) may not be best for someone else. the best advice is to try a few.

[Q] Wondering If I Should Root My SGS3

Hi,
Ive had my Galaxy S3 for about 4 months now, and being in Australia waiting for the Jelly Bean update is driving me crazy, So i wanted to know how hard it would be to root my S3, I would have done it as soon as i got the phone however, My first galaxy stopped working after putting a new rom on the phone and my galaxy s2's screen turned blue and then died, although this could have been because i dropped it the day before, not sure both of these have kind of put me off rooting, however ive had a xoom and optimus 3d that are still fine on custom roms.
Also, If i wanted to return to stock, and unroot the phone, would that restore my warranty?
I have the International Galaxy S3, I think With Optus in Australia,
I would have searched how to root by myself, but i really dont want to brick the phone.
So if someone could link me to a stable rom and some instructions on how to root it would be fantastic
Thanks for reading
4 months..... I couldn't even wait for a day after received my S3
Even with custom ICS ROM you ll see huge difference
Hehhe I don't really care about warranty anymore after I chose to root
As long I enjoy the phone... But there's a way to do that...
I can't help you to find the link for rooting and apply CWM since I haven't been to any threads
If I were you, go search root by CF....
Good luck
Rhys.. said:
Hi,
Ive had my Galaxy S3 for about 4 months now, and being in Australia waiting for the Jelly Bean update is driving me crazy, So i wanted to know how hard it would be to root my S3, I would have done it as soon as i got the phone however, My first galaxy stopped working after putting a new rom on the phone and my galaxy s2's screen turned blue and then died, although this could have been because i dropped it the day before, not sure both of these have kind of put me off rooting, however ive had a xoom and optimus 3d that are still fine on custom roms.
Also, If i wanted to return to stock, and unroot the phone, would that restore my warranty?
I have the International Galaxy S3, I think With Optus in Australia,
I would have searched how to root by myself, but i really dont want to brick the phone.
So if someone could link me to a stable rom and some instructions on how to root it would be fantastic
Thanks for reading
Click to expand...
Click to collapse
androb0t said:
4 months..... I couldn't even wait for a day after received my S3
Even with custom ICS ROM you ll see huge difference
Hehhe I don't really care about warranty anymore after I chose to root
As long I enjoy the phone... But there's a way to do that...
I can't help you to find the link for rooting and apply CWM since I haven't been to any threads
If I were you, go search root by CF....
Good luck
Click to expand...
Click to collapse
Hi, Thanks for the reply,
I am going to follow this guide, Its from another website so my apologies if i am not allowed to post links to external sites, Although i found the link on an XDA thread so i figured it would be okay
http://www.androidrootz.com/2012/09/how-to-root-any-samsung-galaxy-s3.html
And im just looking at ROM's now, Just out of curiosity which ROM are you using androbot?
Thanks
I would always root my phone Just because you can use AD Block
Haha yeah i will look forward to that , Just Root'd phone then Tested with Titanium backup and works fine Just wondering if any of you could recommend a good ROM, or the ROM your currently using that your really happy with? Thanks
I'm using crDroid 6.3 at the moment...
I like ROM doesn't get stripped but still performs fast and fluid too...
Each user has their own taste....
The ROM is around 9xx mb...
It's got AROMA installer too....
After you root and install CWM, crDroid ROM requires touch recovery to avoid any problem...so you need to flash touch recovery recommended ...
Rhys.. said:
Hi, Thanks for the reply,
I am going to follow this guide, Its from another website so my apologies if i am not allowed to post links to external sites, Although i found the link on an XDA thread so i figured it would be okay
http://www.androidrootz.com/2012/09/how-to-root-any-samsung-galaxy-s3.html
And im just looking at ROM's now, Just out of curiosity which ROM are you using androbot?
Thanks
Click to expand...
Click to collapse
I gave stock a try for a while.... Lasted 3 days. Samsung managed to create something that can't run on a quad core phone.... That's almost something to be proud of, I shouldn't experience lag and homescreen redraws on a $500+ phone. Installing a custom rom is a must for me, I don't understand why OEM version of Android are so horrible but they are. Rooting only will give you a few benefits and extra things you can tweak as well as ad blocking and making the GPS faster. But if you really want a change, custom roms are the way to go.
Hey guys new to android based phones, ive had the s3 for a few months and have read the forum for a while, i want to flash a custom rom and read about imei backup which i just did but i want to know is it common for the imei to delete when flashing?
I lasted about 3 weeks on stock.. now dual booting CM10 & UltraROM. You won't regret it :good:
Should I root??
Sorry for posting here but it's the closest I have found to what my question is. I have an AT&T S3. I would like to root to get rid of my bloatware but I'm a chicken. I rooted my HTC Inspire over a year ago and I didn't really know how to remove to AT&T apps and the stock rom was not as snappy as it was prior to rooting. I planned on staying on ICS until an official JB OTA was available, as I've never flashed custom roms before. What I'm most concerned about I guess is whether rooting will mess up my 4gLTE and wifi. I rely heavily on wifi since sadly, AT&T is lame, expensive, and doesn't offer unlimited data. So I want to make sure I don't screw up wifi if I do this. Can anyone provide insight or point me to a good resource that can help?? Thanks a bunch in advance and sorry for the noob questions.
justxan said:
Sorry for posting here but it's the closest I have found to what my question is. I have an AT&T S3. I would like to root to get rid of my bloatware but I'm a chicken. I rooted my HTC Inspire over a year ago and I didn't really know how to remove to AT&T apps and the stock rom was not as snappy as it was prior to rooting. I planned on staying on ICS until an official JB OTA was available, as I've never flashed custom roms before. What I'm most concerned about I guess is whether rooting will mess up my 4gLTE and wifi. I rely heavily on wifi since sadly, AT&T is lame, expensive, and doesn't offer unlimited data. So I want to make sure I don't screw up wifi if I do this. Can anyone provide insight or point me to a good resource that can help?? Thanks a bunch in advance and sorry for the noob questions.
Click to expand...
Click to collapse
Using Odin to flash CF-Root is super-easy, so don't be afraid. Rooting will not affect your phone's smoothness, but if you use it to remove apps with Titanium Backup without making sure they are not useless, you may end up having performance issues or worse. Of course, I'm not saying you shouldn't root, just that after rooting, take care with what you remove via TB.
CF-Root can be found in the Original Android Development forum, follow the instructions and you'll be ok.
All three mobile networks are releasing them this month, November! Telstra, Voda then Optus.
Hopefully it's XXDLJ4 or above or XXDLJ6 etc
Swyped on GT-I9300 - XXDLJ1 - Siyah kernel 1.7b1 - Thunderbolt tweaks - JKay theme -

[Q] Need help

Hi, I have a Galaxy S3 GT i9300. I ordered it online, probably came from Germany since it came with a bunch of paper in German.
Anyway, I live in Portugal, and my carrier is TMN, and I'm really confused on how to root it, and unlocking the bootloader, which I don't know if it's really necessary or not, and then the ROM, which I'll bring up in a moment.
I updated all the way up to 4.1.2 now this is what I want to know:
1. The easiest way to root, I have questions about this cause there are so many ways, and I don't know which one is the best, or the right one cause I don't know if it's unlocked or not, but I'm guessing it is since I'm using a TMN (portuguese carrier) Sim card.
2. Do I need to unlock bootloader? If so, what's the easiest way?
3. Now I'd like to know of a stable ROM, preferably with 4.2.1, or 4.1.2, also I'd like to know if there is any way I could keep the Samsung Apps, and if not, if there is a way to get them back. All in all, I want a clean, fast and stable ROM.
Thank you all.
Nurega21 said:
Hi, I have a Galaxy S3 GT i9300. I ordered it online, probably came from Germany since it came with a bunch of paper in German.
Anyway, I live in Portugal, and my carrier is TMN, and I'm really confused on how to root it, and unlocking the bootloader, which I don't know if it's really necessary or not, and then the ROM, which I'll bring up in a moment.
I updated all the way up to 4.1.2 now this is what I want to know:
1. The easiest way to root, I have questions about this cause there are so many ways, and I don't know which one is the best, or the right one cause I don't know if it's unlocked or not, but I'm guessing it is since I'm using a TMN (portuguese carrier) Sim card.
2. Do I need to unlock bootloader? If so, what's the easiest way?
3. Now I'd like to know of a stable ROM, preferably with 4.2.1, or 4.1.2, also I'd like to know if there is any way I could keep the Samsung Apps, and if not, if there is a way to get them back. All in all, I want a clean, fast and stable ROM.
Thank you all.
Click to expand...
Click to collapse
i would have thought you would root it exactly the same as you would with all other i9300 devices, with cf auto root (http://forum.xda-developers.com/showthread.php?t=1957273) however it doesnt install a custom recovery which you need to install roms. for that a good option is phillz touch (http://forum.xda-developers.com/showthread.php?t=2002953) which is based on cwm after rooting while on android 4.1.2 there is normally a red exclamation mark in the top left corner on boot. this is due to a new bootloader which sammy introduced to help them find phones that have been rooted and sent in for repair. the way arround this is to download the old ice cream sandwich bootloader (i dont have the link but im sure you can find it, i forgot where i downloaded it from sorry ) you may not need this or not be bothered about this so its your choice as for rom it depends on weather your looking for vanilla android or a samsung based rom. however there are no perfect rom it is purely based on your own opinion although a widely used and stable vanilla rom is cyanogen mod (http://forum.xda-developers.com/showthread.php?t=1779426) and most sammy roms are stable as they are not really altered much from stock however i use android revolution and have had no issues with it (http://forum.xda-developers.com/showthread.php?t=1797334). hope i helped in some way and i hope that what i said isnt too confusing thank you for reading
why does everyone want being spoonfed? what happened to good ol' searching? you're asking the most basic questions, do you really think they haven't been answered?
and asking for a clran/stable/good rom is against the rules
Nurega21 said:
1. The easiest way to root, I have questions about this cause there are so many ways, and I don't know which one is the best, or the right one cause I don't know if it's unlocked or not, but I'm guessing it is since I'm using a TMN (portuguese carrier) Sim card.
No best no right you pick a method .
2. Do I need to unlock bootloader? If so, what's the easiest way?
So you dont even bother to read the basic faqs and guides .
3. Now I'd like to know of a stable ROM, preferably with 4.2.1, or 4.1.2, also I'd like to know if there is any way I could keep the Samsung Apps, and if not, if there is a way to get them back. All in all, I want a clean, fast and stable ROM.
BEST ROM posts are banned but you wont know have you have not bothered to read the rules or the faqs and guides .
jje
Click to expand...
Click to collapse
Nurega21 said:
3. Now I'd like to know of a stable ROM, preferably with 4.2.1, or 4.1.2, also I'd like to know if there is any way I could keep the Samsung Apps, and if not, if there is a way to get them back. All in all, I want a clean, fast and stable ROM.
Thank you all.
Click to expand...
Click to collapse
Thread closed. I think the responses above cover most of it
Please use search before posting and don't post Best ROM questions, they are frowned upon.

[Q]at&t unocked vs international factory unlocked

I want to buy one m8. what is the difference between at&t factory unlocked and international factory unlocked version. can i flash roms in international version thread on at&t factory unlocked model directly??
Yes you can flash any rom you want from the international thread. I am currently running Android Revolution.
Sent from my unknown using XDA Premium 4 mobile app
The 3G and LTE band compatibility is different. Do you intend to use on the AT&T network? If so, the "international" (EMEA) version is compatible with AT&T's 3G bands (850 and 1900 MHz); but lacks both of the LTE bands used by AT&T (700 and 1700 MHz) according to this: http://www.gsmarena.com/htc_one_(m8)-6074.php
Not band compatibility is set in hardware, and cannot be changed by flashing different software (ROM, radio, etc.). This means the EMEA version cannot be used on AT&T's LTE network, not matter what you do.
If using on a carrier besides AT&T, I'd check the band compatibility with what your carrier uses. Even if the AT&T version is compatible (with you carrier), I'd probably recommend the international version over it (if compatible as well). The AT&T version is loaded with crappy AT&T bloat and limitations. For instance, WiFi hotspot is blocked, so bootloader needs to be unlocked and the phone rooted in order to make it work on other networks.
Plus, there is the ugly AT&T logo on the back.
Just thought i would bump this thread instead of making a new one. I bought an unlocked at&t htc one m8 off of ebay that i plan to use in another country (i study abroad). I already checked that the frequency bands are compatible, etc. Here's the thing, i don't want my phone to have anything to do with at&t other than the logo in the back. In other words, i want to make it as similar as posible (if not exactly the same) to the international unlocked version. Is this possible with just software changes, etc? (i've read the phones are the same in terms of hardware). I want to remove all at&t bloatware and limitations. can someone please give me quick explanations of what i need to do or point me in the right direction? I'm not new to xda or rooting, but the only smartphone i've ever had is a samsung vibrant (which i've rooted and flashed roms countless times).. this is my first htc phone, so im not very familiar with htcdev or s-off.. but i learn quickly.
I would really appreciate some help
Maelstrom08 said:
Just thought i would bump this thread instead of making a new one. I bought an unlocked at&t htc one m8 off of ebay that i plan to use in another country (i study abroad). I already checked that the frequency bands are compatible, etc. Here's the thing, i don't want my phone to have anything to do with at&t other than the logo in the back. In other words, i want to make it as similar as posible (if not exactly the same) to the international unlocked version. Is this possible with just software changes, etc? (i've read the phones are the same in terms of hardware). I want to remove all at&t bloatware and limitations. can someone please give me quick explanations of what i need to do or point me in the right direction? I'm not new to xda or rooting, but the only smartphone i've ever had is a samsung vibrant (which i've rooted and flashed roms countless times).. this is my first htc phone, so im not very familiar with htcdev or s-off.. but i learn quickly.
I would really appreciate some help
Click to expand...
Click to collapse
Then I suggest you start reading...
http://forum.xda-developers.com/htc-one-m8?nocache=1
Look in there and
https://www.youtube.com/results?search_query=htc+one+m8+root
I have the ViperOneM8 rom installed. What is even cool is in the tweeks, you can change the AT&T bootup and logoff screen to a viperone screen. And change the AT&T logo in the pull down menu to any picture you want. s-off isn't really needed unless you plan on changing the kernel.
Maelstrom08 said:
Just thought i would bump this thread instead of making a new one. I bought an unlocked at&t htc one m8 off of ebay that i plan to use in another country (i study abroad). I already checked that the frequency bands are compatible, etc. Here's the thing, i don't want my phone to have anything to do with at&t other than the logo in the back. In other words, i want to make it as similar as posible (if not exactly the same) to the international unlocked version. Is this possible with just software changes, etc? (i've read the phones are the same in terms of hardware). I want to remove all at&t bloatware and limitations. can someone please give me quick explanations of what i need to do or point me in the right direction? I'm not new to xda or rooting, but the only smartphone i've ever had is a samsung vibrant (which i've rooted and flashed roms countless times).. this is my first htc phone, so im not very familiar with htcdev or s-off.. but i learn quickly.
Click to expand...
Click to collapse
What you describe is easy to do by just unlocking the bootloader, installing custom recovery, and flashing any international based stock rooted ROM or custom ROM. I basically have done the same, as even though AT&T is my carrier, I absolutely hate their branding, non-standard signal icons, bloatware, and limitations (particularly Wifi Hotspot/tethering).
As the previous user already suggested, learning and reading is the best thing for you to do. Don't proceed until you have a good understanding of the concepts and process. My Index thread (specific to the AT&T versions) is a good place to start up reading: http://forum.xda-developers.com/showthread.php?t=2751432
Great, thanks for the information and guidance guys. i'll definitely spend the next couple days reading before rooting the device, i can't afford to brick it. Any other tips or advices as to how to go about rooting, etc?
Developer build device and ATT device are same exact hardware, ONLY difference is ones sim locked and other isnt, bought 2 developer device from [email protected]'s both run fine on ATT networks...
Maelstrom08 said:
Great, thanks for the information and guidance guys. i'll definitely spend the next couple days reading before rooting the device, i can't afford to brick it. Any other tips or advices as to how to go about rooting, etc?
Click to expand...
Click to collapse
no additional advice. I think red point has a wonderful index that should work well for you.
I just wanted to tell you what a wonderfully refreshing attitude you have . Feel free to PM me anytime if you have any specific questions.
Maelstrom08 said:
Any other tips or advices as to how to go about rooting, etc?
Click to expand...
Click to collapse
If you look at my Index thread I linked above, the first item under "Unlock Bootloader, ROOT, S-Off" is an excellent step-by-step guide to rooting. There really isn't much I can't add, the guide is so thorough. But I'd still advise to read around and make sure you fully understand all the concepts and steps, and not just blindly follow the guide.
If the goal is to install a custom ROM, you can stop before the step in guide where it says to flash SuperSU (after flashing TWRP), and just put a ROM on the phone and flash in recovery similar to how you have done in the past. The guide is written with the intent of staying on the stock ROM and rooting.
One tip I can give, is that you may notice there are some Toolkits that attempt to automate some of the process (bootloader unlock, custom recovery, root, etc.). I would actually recommend avoiding the use of these. Reason being, the steps aren't actually all that hard to do "manually", plus these toolkits (while well meaning) shortcut the learning process, and rob you of a valuable learning opportunity.
I'm assuming OP doesn't want a custom ROM or root. Just to convert the AT&T branded model to a stock unlocked model, and still get OTA updates. This is possible. You need to unlock the bootloader, get S-OFF, and then follow this guide (you can skip step 1, changing MID): http://forum.xda-developers.com/htc-one-m8/general/change-wwe-m8-to-dev-edition-ota-t2826567
mindmajick said:
no additional advice. I think red point has a wonderful index that should work well for you.
I just wanted to tell you what a wonderfully refreshing attitude you have . Feel free to PM me anytime if you have any specific questions.
Click to expand...
Click to collapse
Thanks a lot man, you seem to have a really nice personality yourself as well. I'll definitely take you up on that offer when I get a chance.
redpoint73 said:
If you look at my Index thread I linked above, the first item under "Unlock Bootloader, ROOT, S-Off" is an excellent step-by-step guide to rooting. There really isn't much I can't add, the guide is so thorough. But I'd still advise to read around and make sure you fully understand all the concepts and steps, and not just blindly follow the guide.
If the goal is to install a custom ROM, you can stop before the step in guide where it says to flash SuperSU (after flashing TWRP), and just put a ROM on the phone and flash in recovery similar to how you have done in the past. The guide is written with the intent of staying on the stock ROM and rooting.
One tip I can give, is that you may notice there are some Toolkits that attempt to automate some of the process (bootloader unlock, custom recovery, root, etc.). I would actually recommend avoiding the use of these. Reason being, the steps aren't actually all that hard to do "manually", plus these toolkits (while well meaning) shortcut the learning process, and rob you of a valuable learning opportunity.
Click to expand...
Click to collapse
Yeah, I plan on doing it manually. Thanks for all the good advise man. I'm liking what I see in these forums, I'm glad I landed here.
Sorry it took me this long to reply guys, I have been very busy in the past week. Time to learn me some HTC one m8.
Sent from my HTC One_M8 using XDA Free mobile app
One last question guys, hopefully somebody can answer me. I've already read a few topics on the terminology used (s-off, ruu, htcdev, etc.), and things don't seem to be too far from what i thought they were. I'm ready to root and flash a custom rom, but here's my question:
I'm a very methodical person, i like to know what I'm doing and that it's the right way to do it. When i flashed a new rom (or rom version) on my samsung vibrant i would do a full wipe (factory reset, clear chache, clear dalvik cache, format system, and format data) before flashing, then i would flash the rom, and then i would flash the rom on top of itself without doing a full wipe. This method worked for me for over 3 years and kept me from getting common bugs some people complained about. Is it fine if i do this with my m8? (i mainly want to know if it can cause problems).. What's your common flash routine?
Thanks for the help guys
I am simple, I do what you do except the double flash.
Sent from my HTC One_M8 using Tapatalk
Maelstrom08 said:
I'm a very methodical person, i like to know what I'm doing and that it's the right way to do it. When i flashed a new rom (or rom version) on my samsung vibrant i would do a full wipe (factory reset, clear chache, clear dalvik cache, format system, and format data) before flashing, then i would flash the rom, and then i would flash the rom on top of itself without doing a full wipe. This method worked for me for over 3 years and kept me from getting common bugs some people complained about. Is it fine if i do this with my m8? (i mainly want to know if it can cause problems).. What's your common flash routine?
Click to expand...
Click to collapse
What you've stated is fine. Although factory reset already wipes data, cache and Dalvik, so its a bit redundant.
I'm the opposite of methodical (at least in the way you describe). I like to get things done with as few steps as possible (while still doing it right). I've similarly been flashing ROMs on Android devices for 4 years (4 HTC devices and 2 Samsung). But I hardly ever wipe system (flashing a ROM does that by default) and never double flash, and I've never had any issues I would attribute to flashing methods.
Some folks will swear by wiping system for every ROM flash, but honestly while there is nothing wrong with it, I don't believe in it and almost never do it (unless sometimes where the ROM specifically says to do so in the instructions).
On the other hand, there is nothing wrong with redundancy, and if you like to be methodical and thorough I would say just keep doing what you have been doing.
Hi there,
i hope that i will get better answer here.
My question is that i have m8 cell htc, but the problem is i dont know how to check what software was intalled in it at beginnig, i installed at&t marshmallow but want to know weather it was of at&t of international and device does not have any icon on the back of the device. thanks
bilalkamal said:
Hi there,
i hope that i will get better answer here.
My question is that i have m8 cell htc, but the problem is i dont know how to check what software was intalled in it at beginnig, i installed at&t marshmallow but want to know weather it was of at&t of international and device does not have any icon on the back of the device. thanks
Click to expand...
Click to collapse
Do fastboot getvar all, and post the results (delete IMEI and serial number before posting) and if we look at that info, we can probably determine what version it is.

Categories

Resources