Hi I just updated my htc evo 4g 3d from Sprint to 2.95 via ota and after that i cannot use wifi at all it just says error. please Help!!!!
b0235g10d said:
Hi I just updated my htc evo 4g 3d from Sprint to 2.95 via ota and after that i cannot use wifi at all it just says error. please Help!!!!
Click to expand...
Click to collapse
You probably took the update and tried to install it with a custom recovery installed. If so, it appears that will result in a partially installed update with the ROM updated and the kernel not being flashed, which causes WiFi errors.
If that's your situation the best thing to do is flash a stock rooted ROM if that is what you were using prior to taking the OTA.
ramjet73
ramjet73 said:
You probably took the update and tried to install it with a custom recovery installed. If so, it appears that will result in a partially installed update with the ROM updated and the kernel not being flashed, which causes WiFi errors.
If that's your situation the best thing to do is flash a stock rooted ROM if that is what you were using prior to taking the OTA.
ramjet73
Click to expand...
Click to collapse
Can you please give me the official ics 2.89 rom or find it please?
b0235g10d said:
Can you please give me the official ics 2.89 rom or find it please?
Click to expand...
Click to collapse
You can find a rooted version in this post.
ramjet73
ramjet73 said:
You can find a rooted version in this post.
ramjet73
Click to expand...
Click to collapse
I found this thread because I'm in a similar situation. I tried downloading from the quoted link and using 4eXT recovery to load the zip file from sd card and it says "installation aborted".
Any ideas on what to try next? My eventual goal is to get back to 100% showroom stock non-rooted, locked booloader, so that the phone will accept OTA updates fully. Modding/ROMing is a drug I experimented with, and am now ready to go back to the straight and narrow. I'd prefer the phone not have any scars whatsoever from my old habits.
Additional background:
Started with ICS OTA. Used HTC unlock to unlock bootloader. Coworker installed rom toolbox, superSU and 4eXT recovery (not sure what order) to get SOS rom up and running. Never did go for S-OFF.
Decided I wanted to return to 100% Sprint factory stock. Coworker promptly moved across country, leaving me to figure this out. Tried using several ROMs from XDA and elsewhere, and eventually ended up with a rooted almost stock ROM, but had to flash my own radios via 4eXT, as wifi and 4G weren't working from the rom. Flashing my own radios via 4eXT, got to 2.89 with then current radios.
While sitting in my hotel travelling abroad with no international data plan and super slow hotel wifi, I foolishly downloaded OTA this morning, promptly killing my phone's wifi. Phone is still rooted with 4eXT, superSU, installed on it if that helps.
ramjet73 said:
You can find a rooted version in this post.
ramjet73
Click to expand...
Click to collapse
I just did this yesterday (Thanks to ramjet for pointing it out). Backup first. It dose a factory reset. You also need to install the blue tooth fix from this post after flashing the ROM http://forum.xda-developers.com/showpost.php?p=29707708&postcount=303
fixed thanks
Hi to all
I just fixed my phone thanks to Mr ramjet and I used the last one because I completely formatted my phone and only had 4ext it takes while to load the first time but be patient and it will work
How about S-Off phones?
Hello... so my fiance' has a Virgin Mobile Evo 3D. I downloaded the update from them and tried to install it through the custom recovery. It did what Ramjet said by updating the ROM and not the Kernel. I now have no wifi,it says wifi error when trying to turn it on. Since then, I have made sure the stock ROM was rooted, and have also HTCDev unlocked the device as well as S-Off with the Junobear wire trick and Linux. Now that I'm S-Off, is it ok to use an RUU to downgrade everything? Just wondering before I go any further and brick the device or screw up something I shouldn't. I figure it's better to ask questions first before doing it lol! Any help is greatly appreciated from anybody! I have my specs listed here for you all:
HTC Evo 3D 4G Virgin Mobile
Mods: Rooted,HTCDev Unlocked, S-Off
JuopunutBear
Shooter XC SHIP S-OFF RL
HBOOT: 1.57.5757
Radio: 1.09.00.0706
Android Version 4.0.3
Sense Version 3.6
Software number 2.95.652.5 710RD
Kernel Version: 3.0.16-g4211684
[email protected] #1
SMP PREEMPT
Baseband Version:1.09.00.0706
Build Number: 2.95.652.5 CL560640 release-keys
EDIT: Problem has been fixed and I will post a new thread on how to fix the problem soon.
PS4AndroidHacker said:
EDIT: Problem has been fixed and I will post a new thread on how to fix the problem soon.
Click to expand...
Click to collapse
Was this new thread ever made because I am a Virgin Mobile user too just like the above user and ever since last update my wireless has stated error.
If ur phone's bootloader is unlocked, relock your phone by using the fastboot command "fastboot oem lock". Then just download the 2.89 RUU.exe. (i know ur on 2.95 but i have not seen the 2.95 ruu floating around hgere yet) Run it on a windows PC and follow the prompts and it should flash correctly on your phone (caution, it will erase everything on your phone). Once its flashed, the phone will reboot (sometimes more than once) just let it do its thing
Once the phone has flashed correctly, do a software update and it will update to 2.95
Worked for me when i had to go back to stock in order to return it for warranty when the digitizer went out
EDIT:
Here is the link to the 2.95 OTA http://d-h.st/vUe
Download to your PC, then unzip it, and run it after you have relocked your phone
Should you need them, here is the list of HBOOTS (thanks to ramjet73) http://forum.xda-developers.com/showthread.php?p=29844945#post29844945
sixty9fordkiller said:
If ur phone's bootloader is unlocked, relock your phone by using the fastboot command "fastboot oem lock". Then just download the 2.89 RUU.exe. (i know ur on 2.95 but i have not seen the 2.95 ruu floating around hgere yet) Run it on a windows PC and follow the prompts and it should flash correctly on your phone (caution, it will erase everything on your phone). Once its flashed, the phone will reboot (sometimes more than once) just let it do its thing
Once the phone has flashed correctly, do a software update and it will update to 2.95
Worked for me when i had to go back to stock in order to return it for warranty when the digitizer went out
EDIT:
Here is the link to the 2.95 OTA http://d-h.st/vUe
Download to your PC, then unzip it, and run it after you have relocked your phone
Should you need them, here is the list of HBOOTS (thanks to ramjet73) http://forum.xda-developers.com/showthread.php?p=29844945#post29844945
Click to expand...
Click to collapse
This sounds hopeful, I did try to install this before with no luck, it gave me a 131 custom id error. I did it relocked and I am currently 2.95.652.5, and S-ON.
any suggestions?
Thanks
Related
I have a rooted and S-on Evo. The RUU keeps failing, even after I unrooted via the Superuser app.
Keep getting “ERROR [155]: UNKNOWN ERROR” and then it says it can not update the phone.
And then “Please get the correct ROM update utility and try again.”
I am definitely using the correct RUU version. 1.22.651.3.
Also I have tried two different computers and two different USB cables.
Does anyone know how to get this thing working?
if you updated to the latest OTA update; that usually updates your radios and your Hboot which means the old RUU won't work because it has an OLDER HBoot and radios. Your gonna have to wait till the new OTA becomes available as an RUU to be able to go back to stock.
if you didn't take the OTA 2.13 and you are still on 1.22 then try putting your phone on Fastboot and try it that way.
Edit: Ok so it looks like the latest RUU has been uploaded. Look here http://www.filefactory.com/f/b6eb73c80cc97030/
Thanks, I will try fastboot.
However, as I said in the OP, I am on the same version (1.22.651.3) as the RUU I am using...
ronnienyc said:
I have a rooted and S-on Evo. The RUU keeps failing, even after I unrooted via the Superuser app.
Keep getting “ERROR [155]: UNKNOWN ERROR” and then it says it can not update the phone.
And then “Please get the correct ROM update utility and try again.”
I am definitely using the correct RUU version. 1.22.651.3.
Also I have tried two different computers and two different USB cables.
Does anyone know how to get this thing working?
Click to expand...
Click to collapse
I ran into the same error 155 issue.
I found the solution and it's quite simple. In the instructions to unroot, they forget to mention that you MUST relock your bootloader (instructions below). Once you relock it, then you can run the RUU for 1.22.651.3.....after that, take the stock OTA update.
http://www.theandroidsoul.com/how-to-re-lock-htc-one-x-bootloader/
It helps to have HTC Sync installed too
Sent from my EVO using Tapatalk 2
Is there another site with the new ruu?
Sent from my EVO using Tapatalk 2
running "fastboot oem lock" yields "waiting for device," and this stays on the screen forever. It doesn't work...
OK, finally got it to lock. Now, trying to see if I can get that RUU to work...it seems to be working. I think the issue was that I was not properly in fastboot mode.
So my plan is this:
RUU
OTA (to get the latest kernel and such)
Root/Unlock
MeanROM
Hypeo said:
It helps to have HTC Sync installed too
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Correct - this is an important step too. HTC Sync must be fully installed, drivers and all.
---------- Post added at 11:04 PM ---------- Previous post was at 11:01 PM ----------
ronnienyc said:
OK, finally got it to lock. Now, trying to see if I can get that RUU to work...it seems to be working. I think the issue was that I was not properly in fastboot mode.
So my plan is this:
RUU
OTA (to get the latest kernel and such)
Root/Unlock
MeanROM
Click to expand...
Click to collapse
Congrats!
That's my plan, except I'm keeping the stock ROM. If you find a way to Root, let me know - I tried RegawMOD, but I could not get it to work
ronnienyc said:
OK, finally got it to lock. Now, trying to see if I can get that RUU to work...it seems to be working. I think the issue was that I was not properly in fastboot mode.
So my plan is this:
RUU
OTA (to get the latest kernel and such)
Root/Unlock
MeanROM
Click to expand...
Click to collapse
I would highly suggest NOT taking the OTA...
The reason they now have a new h-boot is because there was a vulnerability in the old one.
Simply flash a new ROM based on the lastest OTA.
ronnienyc said:
OK, finally got it to lock. Now, trying to see if I can get that RUU to work...it seems to be working. I think the issue was that I was not properly in fastboot mode.
So my plan is this:
RUU
OTA (to get the latest kernel and such)
Root/Unlock
MeanROM
Click to expand...
Click to collapse
I would highly suggest NOT taking the OTA...
The reason they now have a new h-boot is because there was a vulnerability in the old one.
Simply flash a new ROM based on the lastest OTA.
Rxpert said:
I would highly suggest NOT taking the OTA...
The reason they now have a new h-boot is because there was a vulnerability in the old one.
Simply flash a new ROM based on the lastest OTA.
Click to expand...
Click to collapse
I suggest no OTA as well!
Rxpert said:
I would highly suggest NOT taking the OTA...
The reason they now have a new h-boot is because there was a vulnerability in the old one.
Simply flash a new ROM based on the lastest OTA.
Click to expand...
Click to collapse
That's not always true, and almost all new major releases come with a new hboot. In fact I can't remember any updates on my 0g evo, evo 3d, and evo LTE, that didn't come with a new hboot. The fact of the matter is, people that are s-on and hboot 1.15 won't be able to upgrade their radios and firmware unless they take the ota or run the ruu. This update makes the phone fly and is worth it.
On the other post, regaw mod does work with unlocking and installing twrp, you will have to install a rooted rom afterwards though because regaw mod fails at the rooting step.
Sent from my icrap 2 using Tapatalk HD
cruise350 said:
The fact of the matter is, people that are s-on and hboot 1.15 won't be able to upgrade their radios and firmware unless they take the ota or run the ruu. This update makes the phone fly and is worth it.
On the other post, regaw mod does work with unlocking and installing twrp, you will have to install a rooted rom afterwards though because regaw mod fails at the rooting step.
Sent from my icrap 2 using Tapatalk HD
Click to expand...
Click to collapse
Sweet this is actually the point where I'm at. HTC Dev unlocked, s-on, hboot 1.15 and rocking twrp. I've been trying to parse through all of the numerous posts on a method to go ahead and install the ota updates. I actually believe I'm 2 down as I haven't updated ever and I got the phone @ launch. I recall reading somewhere that just going back to the stock recovery is a viable option if I want to go w/ the ota updates. I don't really have any interest in different ROMs (I scratch that itch w/ my evo 3d).
tl;dr Whats the least painful way to install the OTA updates post HTC Dev unlock, s-on, twrp recovery, and hboot 1.15?
First I must say that I have already fixed the problem. I flashed and RUU using step 8 and up on the DirtyRacun method and my phone us back to normal.
I'm S-off
HBOOT 1.15.2222
Originally had Venom 2.0.1 installed (error: i have 3.0.1)
Flashed Using TWRP 2.4.1.0
I did a full wipe before flashing. While I was flashing MeanBean 2.02 I think it just restarted without warning. When I tried going into TWRP again it wouldn't load, it would show the boot screen for a split second then reboot into bootloops. I tried fastboot flashing other version of TWRP but that didn't do anything.
From here I relocked and flashed my RUU accordingly with the DirtyRacun process. After unlocking my bootloader and flashing TWRP 2.3.1.0 I restored my old backup of Venom and I'm back to normal.
I checked the MD5 sums of the MeanBean ROM and they matched.
What the heck happen during the install?
Flash new radios now my phone is bricked and get teh DLOAD drivers on windows.
I'm gonna take a guess and say you flashed the latest firmware 3.16 without flashing the previous firmware update 3.15.
There is no radio only zip available from the latest OTA update for this very reason.
If this is the case your phone is unrecoverable . back to sprint
Sent from my EVO using xda premium
Shad Stang said:
First I must say that I have already fixed the problem. I flashed and RUU using step 8 and up on the DirtyRacun method and my phone us back to normal.
I'm S-off
HBOOT 1.15.2222
Originally had Venom 2.0.1 installed
Flashed Using TWRP 2.4.1.0
I did a full wipe before flashing. While I was flashing MeanBean 2.02 I think it just restarted without warning. When I tried going into TWRP again it wouldn't load, it would show the boot screen for a split second then reboot into bootloops. I tried fastboot flashing other version of TWRP but that didn't do anything.
From here I relocked and flashed my RUU accordingly with the DirtyRacun process. After unlocking my bootloader and flashing TWRP 2.3.1.0 I restored my old backup of Venom and I'm back to normal.
I checked the MD5 sums of the MeanBean ROM and they matched.
What the heck happen during the install?
Click to expand...
Click to collapse
u must have did something u wasnt suupposed to do cause meanbean would not hurt your phone in anyway bro
I second this, I am having issues as well.
Let this be a warning for others that may follow in your footsteps. You need to make sure you know what you are doing before you start flashing firmware. Firmware is meant to be upgraded one step at a time, not jumping from an old firmware to the latest, this will brick you phone in most cases. Please make sure you have verified your current firmware that you are on and upgrade to the next highest in sequence until you finally reach the newest. Also, the radio is just a part of the firmware, so if you did not upgrade the full firmware in the past then you need to go back and install the full firmware that you were on and then upgrade to each subsequent one. If you are s-on the only way to do this is to relock and take the OTA. For those that are s-off visit Captain Throwbacks thread in the development section and start reading and learning. You may find a solution in it.
Cruise was right, i thought i had the radio that came with 3.15 but i really had the radio that came with 1.22 XD.
Need to Update...not sure how!
cruise350 said:
Let this be a warning for others that may follow in your footsteps. You need to make sure you know what you are doing before you start flashing firmware. Firmware is meant to be upgraded one step at a time, not jumping from an old firmware to the latest, this will brick you phone in most cases. Please make sure you have verified your current firmware that you are on and upgrade to the next highest in sequence until you finally reach the newest. Also, the radio is just a part of the firmware, so if you did not upgrade the full firmware in the past then you need to go back and install the full firmware that you were on and then upgrade to each subsequent one. If you are s-on the only way to do this is to relock and take the OTA. For those that are s-off visit Captain Throwbacks thread in the development section and start reading and learning. You may find a solution in it.
Click to expand...
Click to collapse
(1) How do I know if I'm s-off or on?
(2) I keep getting an OTA update notification. Do I take this update? If so, once it downloads then what?
-Running MeanBean_1.7 (I know sooo...far behind. That's why I want to update)
-Android 4.1.1
-PRL 25012
-Kernel: [email protected] #1 SMP PREEMPT
BaseB - 1.12.11.1119
Build - 3.15.651.16 CL124461 release-keys
I just need a step by step process on how to update this thing. Video, tutorial. etc.
Thanks in advance!
KEMODREAMS said:
(1) How do I know if I'm s-off or on?
(2) I keep getting an OTA update notification. Do I take this update? If so, once it downloads then what?
-Running MeanBean_1.7 (I know sooo...far behind. That's why I want to update)
-Android 4.1.1
-PRL 25012
-Kernel: [email protected] #1 SMP PREEMPT
BaseB - 1.12.11.1119
Build - 3.15.651.16 CL124461 release-keys
I just need a step by step process on how to update this thing. Video, tutorial. etc.
Thanks in advance!
Click to expand...
Click to collapse
Unless you bought your phone used, you should know whether you are s-on or s-off since it is an involved process to get your phone s-off. What ota notices are you getting? Are they from the ota updater built in to MeanBean, or is it the HTC update?
If its the MeanBean update you can let it update and it should work just fine. Your firmware will not be up to date, but MeanBean will still work. If its HTC then don't take the update.
If you are s-off you can update you firmware with the file provided in the first post of the MeanBean thread.
If you are s-on, the only way to update your firmware is returning to stock, locking your bootloader, and taking the HTC ota update.
Sent from my icrap 2 using Tapatalk HD
cruise350 said:
Unless you bought your phone used, you should know whether you are s-on or s-off since it is an involved process to get your phone s-off. What ota notices are you getting? Are they from the ota updater built in to MeanBean, or is it the HTC update?
If its the MeanBean update you can let it update and it should work just fine. Your firmware will not be up to date, but MeanBean will still work. If its HTC then don't take the update.
If you are s-off you can update you firmware with the file provided in the first post of the MeanBean thread.
If you are s-on, the only way to update your firmware is returning to stock, locking your bootloader, and taking the HTC ota update.
Sent from my icrap 2 using Tapatalk HD
Click to expand...
Click to collapse
+1 if you boot into boot loader you will see whether you are s-off or not.
Sent from my Nexus 7 using xda app-developers app
Need to Update...not sure how!
ronniemayo said:
+1 if you boot into boot loader you will see whether you are s-off or not.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Ok so I did that and it says I'm s-on. Now what? Do I take the OTA update that says "This will update your ROM (MeanBean) to version MeanBean_3.06"? If so, once it's downloaded what do I do? Restart into bootloader? Also my Titanium backup is saying that it "could not acquire root privileges" What does that mean? Thanks for your help.
If you want to update meanbean then backup and flash the latest meanbean. If yours breaks like mine did, flash an ruu and dont be an idiot like me. im guessing it s a rare occurrence that mine broke the recovery
If your goal is to flash new radios then you have two options:
Two methods:
Get your adventure face on and follow the DirtyRacun S-Off process step by step (It worked for me on windows 7 x64 but its easy to use a ubuntu livecd)
Once you are s-off you can flash radios. DO NOT JUMP VERSIONS... EVER use the baseband version as reference in about phone and flash each version up until you are at the latest
OR
staying s-on and leaving yourself less prone to brick hell
recovery nandroid backup: system, data, boot
flash ruu
ota update
reroot
restore backup.
i dont know how to root from the latest version so idk if this is a good procedure. make sure you can root with the latest version
But really if you have a choice, ditch the evo and get the s3. you can firmware jump all you want, but the downside is that the s3 has sh*t roms. I miss venom and stock with goodies :crying:
Shad Stang said:
If you want to update meanbean then backup and flash the latest meanbean. If yours breaks like mine did, flash an ruu and dont be an idiot like me. im guessing it s a rare occurrence that mine broke the recovery
If your goal is to flash new radios then you have two options:
Two methods:
Get your adventure face on and follow the DirtyRacun S-Off process step by step (It worked for me on windows 7 x64 but its easy to use a ubuntu livecd)
Once you are s-off you can flash radios. DO NOT JUMP VERSIONS... EVER use the baseband version as reference in about phone and flash each version up until you are at the latest
OR
staying s-on and leaving yourself less prone to brick hell
recovery nandroid backup: system, data, boot
flash ruu
ota update
reroot
restore backup.
i dont know how to root from the latest version so idk if this is a good procedure. make sure you can root with the latest version
But really if you have a choice, ditch the evo and get the s3. you can firmware jump all you want, but the downside is that the s3 has sh*t roms. I miss venom and stock with goodies :crying:
Click to expand...
Click to collapse
You should read Captain _Throwback's firmware thread
You can root the latest OTA just click the link in my sig
Sent from my PoS MoPho
This is going to be a short and simple guide for S-OFF users that want to update to the current RUU level or refresh their phone because they are having issues like being unable to boot certain ROM's. You will not lose S-OFF by flashing the RUU.
1. Do a nandroid backup of your current ROM if you want to restore it later.
2. Download the current version of the RUU for your phone in exe or zip format from this page.
3. Run the exe version of the RUU in Windows or the zip version as a PG86IMG.zip file through the bootloader. If using the bootloader method make sure the file is named exactly "PG86IMG.zip" and placed in the root of your SD card before starting the bootloader.
There is no need to unlock the bootloader before running it if you are S-OFF and there is troubleshooting information in this post if you have problems. It may be necessary to run the RUU twice if you have a custom bootloader installed when it is run the first time. If the utility hangs after flashing the bootloader from Windows just cancel it and restart.
I recommend downloading and installing the OTA(s) immediately after flashing the RUU to get the most current firmware while still 100% stock, but the OTA firmware update(s) can be downloaded as a separate PG86IMG.zip file if you forget or can't do that for some reason.
4. Flash a custom hboot using the instructions in this post. My recommendation for a good general purpose hboot is the JBear GB 1.50.5050 version unless you are running an ICS Sense ROM like stock or Cool ICS that requires an ICS bootloader (1.57.xxxx or 1.58.xxxx).
5. Connect your phone to a PC and start the bootloader in "fastboot USB " mode, then issue the following command to flash your favorite recovery:
fastboot flash recovery recovery.img (where "recovery.img" is the name of the recovery file in your ADB/fastboot directory)
6. Boot into recovery and restore a nandroid or flash another custom ROM. You may have to wipe cache+dalvik and restart recovery if you get any error messages from the recovery program.
That's it. You're now updated or re-synced with the current firmware, the hboot that meets your requirements and your favorite recovery.
Here are some additional links that might be helpful:
4EXT Recovery OP for the Evo 3D CDMA thread with a direct link to recovery.img in the download section (not the most current version)
Current TeamWin (TWRP2) touch recovery for the CDMA Evo 3d.
Virgin Mobile OTA firmware only in PG86IMG.zip format.
Sprint OTA firmware only in PG86IMG.zip format.
ramjet73
Thanks for this.
Question,the RUU links...
Am I looking for the link with the radio he has currently on his phone?
0.97.10.0530?
3volution said:
Thanks for this.
Question,the RUU links...
Am I looking for the link with the radio he has currently on his phone?
0.97.10.0530?
Click to expand...
Click to collapse
No. That's an older GB level and the most current RUU for the Evo 3D is the 2.89.651.2 ICS version. That's the one I recommend.
Since he is S-OFF already it's easy to revert to a GB RUU if neccessary.
ramjet73
I better not mess with it,lol
This isn't anything like flashing new ROM's on my phone.
Thanks though.
3volution said:
I better not mess with it,lol
This isn't anything like flashing new ROM's on my phone.
Thanks though.
Click to expand...
Click to collapse
You're welcome.
It's not really that difficult if you are familiar with rooting and flashing HTC devices but I can understand how it might be for users coming from other brands. Samsung in particular is definitely less complicated.
ramjet73
Thanks!
Thanks for this great post ramjet. Really a great concise How-to.
Nevermind, fixed.
ramjet73 said:
No. That's an older GB level and the most current RUU for the Evo 3D is the 2.89.651.2 ICS version. That's the one I recommend.
Since he is S-OFF already it's easy to revert to a GB RUU if neccessary.
ramjet73
Click to expand...
Click to collapse
I flashed the above RUU .exe and I'll get to 10%, then my phone reboots (RUU program says "attaining bootloader" or something) and go into a bootloop. Is there a specific hboot necessary to run this. I am on 1.04.200 and s-off, 1.09.00.706
I also tried updating via the bootloader method as well..... runs well....updates like four of the ten check offs and then bootloops as well.
Edit: turns out I was flashing the wrong version, oops
Hedied4me said:
I flashed the above RUU .exe and I'll get to 10%, then my phone reboots (RUU program says "attaining bootloader" or something) and go into a bootloop. Is there a specific hboot necessary to run this. I am on 1.04.200 and s-off, 1.09.00.706
Click to expand...
Click to collapse
From experience I've discovered that the RUU.exe utility will sometimes stop after flashing the stock bootloader if it is run with a custom hboot installed, which is why I put this comment in the OP:
If the utility hangs after flashing the bootloader from Windows just cancel it and restart.
Click to expand...
Click to collapse
I've had no problem completing the RUU.exe flash if I just cancel the utility in the Windows task manager and restart it.
Others have reported that re-flashing the RUU.zip file through the bootloader also works if the original flash is incomplete.
Also, make sure that you downgrade your hboot after flashing the RUU since the stock hboot won't boot GB or AOSP based ROM's.
ramjet73
Ok one more stupid question, after successfully flashing the correct RUU my phone boots into the stock virgin mobile. How do I get into bootloader (to flash OTA update and hboot) from here since holding power and volume down button from off no longer work.
Sent from my HTCEVOV4G using Tapatalk 2
Hedied4me said:
Ok one more stupid question, after successfully flashing the correct RUU my phone boots into the stock virgin mobile. How do I get into bootloader (to flash OTA update and hboot) from here since holding power and volume down button from off no longer work.
Click to expand...
Click to collapse
Try removing/replacing the battery and then use the Power+VolumeDown buttons together to enter the bootloader.
The stock ROM has the "fast boot" option turned on in the power settings by default and that will interfere if you try to enter the bootloader after powering down from the stock ROM.
ramjet73
Thank you very much for your patience and help Ramjet. Everything went well.
Sent from my Evo V 4G using Tapatalk 2
Please excuse me this might have been asked before.
I'm currently S-Off H-boot 1.40 but still on gingerbread firmware(2.17 radio 0.97.10.0530). also flashed to Boost Mobile. My question is if I run RUU to newest build will I lose boost mobile flash?
El Queson said:
Please excuse me this might have been asked before.
I'm currently S-Off H-boot 1.40 but still on gingerbread firmware(2.17 radio 0.97.10.0530). also flashed to Boost Mobile. My question is if I run RUU to newest build will I lose boost mobile flash?
Click to expand...
Click to collapse
I honestly don't know.
There is a post by a cricket user in my rooting and S-OFF guide that says the customization is not lost for that carrier but I've never used Boost and can't speak to that.
Perhaps another Boost user on these forums has experience with flashing the RUU.
ramjet73
++sorry++
Using the bootloader procedure is, by far, the easiest way of doing the RUU process that I've encountered. From custom ROM, to stock, back to a custom ROM in less than 45 minutes.
ramjet, thank you for your contributions to our platform.
so my wife is hboot 1.40, radio version 0.97.... running a GB ROM. I need to update her EVERYTHING(you pointed me here) and get her on NegaLite BluROM. I believe I will need to update her hboot as well. At what point in this process should that be done? Do I need to be worried that her current ROM is incompatible with either the new RUU or the new bootloader? And if it is, then I just work through it all in recovery?
Very useful thread, and thank you very much, by the way.
GAPO said:
so my wife is hboot 1.40, radio version 0.97.... running a GB ROM. I need to update her EVERYTHING(you pointed me here) and get her on NegaLite BluROM. I believe I will need to update her hboot as well. At what point in this process should that be done? Do I need to be worried that her current ROM is incompatible with either the new RUU or the new bootloader? And if it is, then I just work through it all in recovery?
Very useful thread, and thank you very much, by the way.
Click to expand...
Click to collapse
Is her phone S-OFF? If so, there is a link in the OP to a post that covers updating the hboot. If not, the only way to update the hboot is to flash a more current RUU.
ramjet73
ramjet73 said:
Is her phone S-OFF? If so, there is a link in the OP to a post that covers updating the hboot. If not, the only way to update the hboot is to flash a more current RUU.
ramjet73
Click to expand...
Click to collapse
Yes she is S-off. She also already has 4ext recovery installed.
Does this negate my need to flash recovery in the downloader?
Since she is S-off, this should be pretty easy.
I will still need to access the bootloader via Windows cmd, yes? Or can I accomplish all of this using only the handset?
Sent from my PG86100 using xda premium
---------- Post added at 07:07 PM ---------- Previous post was at 06:52 PM ----------
Her hboot is:
SHOOTER XC SHIP S-OFF RL
HBOOT-1.40.0000
RADIO-0.97.10.0530
eMMC-boot
Jun 8 2011, 17:20:22
Is this a custom hboot, or stock? I ask because of the caution on the OP regarding custom bootloaders. And I am not sure because I changed her bootloader a week or so ago and had to change it back.
Sent from my PG86100 using xda premium
GAPO said:
Is this a custom hboot, or stock? I ask because of the caution on the OP regarding custom bootloaders. And I am not sure because I changed her bootloader a week or so ago and had to change it back.
Click to expand...
Click to collapse
That's a stock hboot so you should be fine. You can still update using the RUU if a custom hboot is installed, but it might take a restart to complete after the stock hboot is installed.
ramjet73
Hi guys.
I was trying to do one of two things. Either get to stock ICS with the RUU or get to an older stock version so that my phone would update itself.
I ran the ICS RUU and ran into an issue. Im on Hboot 2.28 Radio 2.23.10.0123r/2.23.10.0124r
I am S-On and relocked to get run the RUU.
I got an error as it said the Hboot version is older. Now I am stuck on the Bootloader with TAMPERED, RELOCKED, and Security Warning.
I should have known that I potentially had a leaked Hboot version but it was so long ago I forgot.
What can I do? Iv been googling and searching threads without much luck. Do I have to S-off? Can I S-off from this position? The other issue I keep running into is dead file links.
brownsfan said:
Hi guys.
I was trying to do one of two things. Either get to stock ICS with the RUU or get to an older stock version so that my phone would update itself.
I ran the ICS RUU and ran into an issue. Im on Hboot 2.28 Radio 2.23.10.0123r/2.23.10.0124r
I am S-On and relocked to get run the RUU.
I got an error as it said the Hboot version is older. Now I am stuck on the Bootloader with TAMPERED, RELOCKED, and Security Warning.
I should have known that I potentially had a leaked Hboot version but it was so long ago I forgot.
What can I do? Iv been googling and searching threads without much luck. Do I have to S-off? Can I S-off from this position? The other issue I keep running into is dead file links.
Click to expand...
Click to collapse
So I think I found out what I did. 2.28 is the Global version. I must of rooted that version and flashed roms. I wanted to unroot and get back to stock software version.
Where should I go from here? Is there an RUU for the ICS Global? I can not seem to find one.
Have you tried unlocking the bootloader again?
Edit: I searched for a long time (a few days ago) but couldn't find any information on S-Off, not going back to stock for people on the latest OTA. I'm not the best person to give advice, but if you're on the current OTA, I don't think you can use the RUU.exe.
Also, you can't downgrade if you're S-On - only upgrade..
Sent from my ADR6425LVW using xda app-developers app
Thingula said:
Have you tried unlocking the bootloader again?
Edit: I searched for a long time (a few days ago) but couldn't find any information on S-Off, not going back to stock for people on the latest OTA. I'm not the best person to give advice, but if you're on the current OTA, I don't think you can use the RUU.exe.
Also, you can't downgrade if you're S-On - only upgrade..
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Yes I can unlock again and that does get me unstock from the boot screen but still cant get where I want. Hmm.
I wonder if you can fastboot-flash the older kernels, using a computer, then flash the old stock ROM, lock the bootloader, then run an RUU.. Can anyone confirm this? Sounds too simple to work on an HTC phone.
Edit: No, of course that doesn't work. Sorry, I can't really offer any more help.. I'll have to just hope that someone more knowledgeable can take over.
Sent from my ADR6425LVW using xda app-developers app
Be prepared, I get rather long winded.
If you were on the most current 4.05.605.14 with S-on which based on what you list as the radios and hboot is what it appears you were on, then you are in a difficult spot. The really bad news is the only RUU you would be able to use is the 4.05.605.14 and no one has admitted to being able to get ahold of. The most current one available is 3.14.605.12 but that is useless to you. You would have to S-off to go back to stock but would have to have a working rom to do it. It's not impossible but it aint easy. I just had to do it about a month ago when I was trying to S-off my replacement Rezound. It came with the most current stock ROM and I didn't bother reading up on the current ControlBear method. In the past, you had to have a rooted rom in order to S-off. So of course, I unlocked the bootloader, flashed AmonRa 3.15 and then used superuser to root it and then went about trying to S-off. I couldn't find my previous windows based versions of ControlBear so I went about making a live cd ubunto disk and trying to S-off. It wouldn't work. Then I read the unlimited.io site instructions and found that the current version needs the unrooted stock rom to succeed. I really never paid attention to unrooting before because if I had to do it, I could always just run the factory wipe and root would be gone but not this time. It kept showing that I was rooted. So I tried wiping data, cache, dalvik cache, and after that didn't work, I wiped the system. Very bad move on my part. Now I couldn't get past the bootloader. I thought I was done for because I knew with S-on, there was no going back and the global rom RUU was still not available.
After trying all kinds of things I ended up
1. downloading the 4.05.605.14 stock rooted rom listed HERE (Thanks MicroMod777) in the Rezound Development section.
2. Then downloaded the current firmware.zip from HERE (Thanks Flyhalf205) and then extracted the recovery.img along with the hboot .nb0 file from it.
3. I then created 2 separate custom ph98img.zip for each so I could always reinstall the stock hboot and the stock recovery.img.
4. I extracted the boot.img from the rooted rom and flashed that first. I don't remember if I did it via adb in fastboot usb or with another ph98img.zip and then
5. I made sure that my bootloader was unlocked and then installed AmonRa as the recovery
6. Then used AmonRa to flash the stock rooted zip file. I then wiped the cache 3 times and the dalkvik cache 3 times.
I let the phone reboot and I was back to a working phone.!!! Then I found out that it was rooted with SuperSu which gives you the option of doing a full permanent unroot which I did. I then put that ph98img that I had made that had the stock recovery.img on it and flashed that in the bootloader. After rebooting I now had a fully stock phone and proceeded to do the S-off. I left the bootloader unlocked as directed by the unlimited.io site. I had limited experience with ubunto but found THIS PAGE that helped walk me through it. I followed it exactly and ended up with an S-off phone. One thing that wasn't clear to me was how to open a terminal in ubunto but I figured that out after trial and error. IIRC, I clicked on the home tab on the left and then in the search box, typed terminal. The first icon that was shown was a terminal emulator and I used that for the commands.
Now I still wasn't finished. I ended up relocking the bootloader but didn't like the relocked and tampered flags that were showing. So I ended up running the most recent RUU (3.14.605.12 found HERE and I now had a ***LOCKED*** bootloader and then let the phone reboot. After it rebooted, I hit the home key and bypassed the setup. I then got into settings and then into software update and let it update. It did a small update and then had to repeat the reboot, bypass setup, and software update. This time it did the global update. I let it reboot but this time, I ran the setup. Once I was up and running, I again went into bootloader and reinstalled AmonRa and used the 3.16 version and made sure to do a nandroid before doing anything further. After that, I got ahold of SuperSu 1.51 and flashed that in the AmonRa recovery. I now had a ***LOCKED*** stock rooted Rezound and several nandroid backups of both fully stock and rooted. Which turned out to be a great idea because not even 3 weeks later after this, the phone started malfunctioning (power button) and a problem with the camera so it got replaced and I had to put it back fully stock. I was already setup for this. I unrooted, put the stock recovery back on, and made it S-on. When the replacement came, I immediately unlocked it, did the S-off (only took one try), relocked, ruu'd back to 3.14.605.12, updated to global rom, flashed AmonRa, and restored with my most recent rooted nandroid. and I am back up and running a whole lot sooner...
I hope this helps.
Very much so! Thank you. If I could hit the thanks button 10x I would.
Im sure im not the only only to have the Hboot 2.28 issue.
hey man you still around ? i need some help with a situation like this
dust906 said:
hey man you still around ? i need some help with a situation like this
Click to expand...
Click to collapse
I replied to you in your thread.
S-On Locked stock !
mikeyk101 said:
Be prepared, I get rather long winded.
If you were on the most current 4.05.605.14 with S-on which based on what you list as the radios and hboot is what it appears you were on, then you are in a difficult spot. The really bad news is the only RUU you would be able to use is the 4.05.605.14 and no one has admitted to being able to get ahold of. The most current one available is 3.14.605.12 but that is useless to you. You would have to S-off to go back to stock but would have to have a working rom to do it. It's not impossible but it aint easy. I just had to do it about a month ago when I was trying to S-off my replacement Rezound. It came with the most current stock ROM and I didn't bother reading up on the current ControlBear method. In the past, you had to have a rooted rom in order to S-off. So of course, I unlocked the bootloader, flashed AmonRa 3.15 and then used superuser to root it and then went about trying to S-off. I couldn't find my previous windows based versions of ControlBear so I went about making a live cd ubunto disk and trying to S-off. It wouldn't work. Then I read the unlimited.io site instructions and found that the current version needs the unrooted stock rom to succeed. I really never paid attention to unrooting before because if I had to do it, I could always just run the factory wipe and root would be gone but not this time. It kept showing that I was rooted. So I tried wiping data, cache, dalvik cache, and after that didn't work, I wiped the system. Very bad move on my part. Now I couldn't get past the bootloader. I thought I was done for because I knew with S-on, there was no going back and the global rom RUU was still not available.
After trying all kinds of things I ended up
1. downloading the 4.05.605.14 stock rooted rom listed HERE (Thanks MicroMod777) in the Rezound Development section.
2. Then downloaded the current firmware.zip from HERE (Thanks Flyhalf205) and then extracted the recovery.img along with the hboot .nb0 file from it.
3. I then created 2 separate custom ph98img.zip for each so I could always reinstall the stock hboot and the stock recovery.img.
4. I extracted the boot.img from the rooted rom and flashed that first. I don't remember if I did it via adb in fastboot usb or with another ph98img.zip and then
5. I made sure that my bootloader was unlocked and then installed AmonRa as the recovery
6. Then used AmonRa to flash the stock rooted zip file. I then wiped the cache 3 times and the dalkvik cache 3 times.
I let the phone reboot and I was back to a working phone.!!! Then I found out that it was rooted with SuperSu which gives you the option of doing a full permanent unroot which I did. I then put that ph98img that I had made that had the stock recovery.img on it and flashed that in the bootloader. After rebooting I now had a fully stock phone and proceeded to do the S-off. I left the bootloader unlocked as directed by the unlimited.io site. I had limited experience with ubunto but found THIS PAGE that helped walk me through it. I followed it exactly and ended up with an S-off phone. One thing that wasn't clear to me was how to open a terminal in ubunto but I figured that out after trial and error. IIRC, I clicked on the home tab on the left and then in the search box, typed terminal. The first icon that was shown was a terminal emulator and I used that for the commands.
Now I still wasn't finished. I ended up relocking the bootloader but didn't like the relocked and tampered flags that were showing. So I ended up running the most recent RUU (3.14.605.12 found HERE and I now had a ***LOCKED*** bootloader and then let the phone reboot. After it rebooted, I hit the home key and bypassed the setup. I then got into settings and then into software update and let it update. It did a small update and then had to repeat the reboot, bypass setup, and software update. This time it did the global update. I let it reboot but this time, I ran the setup. Once I was up and running, I again went into bootloader and reinstalled AmonRa and used the 3.16 version and made sure to do a nandroid before doing anything further. After that, I got ahold of SuperSu 1.51 and flashed that in the AmonRa recovery. I now had a ***LOCKED*** stock rooted Rezound and several nandroid backups of both fully stock and rooted. Which turned out to be a great idea because not even 3 weeks later after this, the phone started malfunctioning (power button) and a problem with the camera so it got replaced and I had to put it back fully stock. I was already setup for this. I unrooted, put the stock recovery back on, and made it S-on. When the replacement came, I immediately unlocked it, did the S-off (only took one try), relocked, ruu'd back to 3.14.605.12, updated to global rom, flashed AmonRa, and restored with my most recent rooted nandroid. and I am back up and running a whole lot sooner...
I hope this helps.
Click to expand...
Click to collapse
This guide was FREAKING AWESOME. It led me to finally after 2 years go S-Off (wire trick) to do RUU, etc. Have to return phone and have already got replacement. Crossed my fingers and everything looks stock stock stock !
Ok I unlocked my loader, then i think what happend was clockwerk installed its self to the boot partition so i was stuck in a loop. I used One_M8_All-In-One_Kit_v to flash a new recovery lower version at that and now i do have a bootable recovery. Problem is now i didn't backup like a dumb arse my working OS and flashed a bad one or maybe the radio or some crap needed to be done first since it was going from 4.4.2 to 5+. In short all i have is recovery and sideload and every rom i download fails to sideload on the phone side and says sucessful on the pc cmd window. Need help with this please
Darthdiddy said:
Ok I unlocked my loader, then i think what happend was clockwerk installed its self to the boot partition so i was stuck in a loop. I used One_M8_All-In-One_Kit_v to flash a new recovery lower version at that and now i do have a bootable recovery. Problem is now i didn't backup like a dumb arse my working OS and flashed a bad one or maybe the radio or some crap needed to be done first since it was going from 4.4.2 to 5+. In short all i have is recovery and sideload and every rom i download fails to sideload on the phone side and says sucessful on the pc cmd window. Need help with this please
Click to expand...
Click to collapse
Wipe data, cache, dalvik, put the appropriate ROM for your carrier/build on SD card or root of internal storage and flash. All else fails run an RUU, bring you back to 100% stock then you can properly reinstall the custom recovery of your choice.
CavyS said:
Wipe data, cache, dalvik, put the appropriate ROM for your carrier/build on SD card or root of internal storage and flash. All else fails run an RUU, bring you back to 100% stock then you can properly reinstall the custom recovery of your choice.
Click to expand...
Click to collapse
I do the proper wipe before flashing my new rom, i'm under the AT&T HTC One M8 section i believe my phone was only @ 4.4.2 before this and here is the bootloader info is :
***Tampered***
***Unlocked***
M8_UL_CA_ PVT SHIP S-On
HBOOT-3.16.0.0000
RADIO-1.16.21331931.LA11G
OpenDSP-v38.2.2-00542-M8974.0311
OS-
eMMC-boot 2048MB
Apr 18 2014,16:06:33.22985
Tried cm-12-20150131-NIGHTLY-m8 it fails to flash and its on the sd and internal. SkyDragon M8 Sense Rom installs but doesn't boot (tried 2 versions of this rom 700mb and a 1.6gb), believe i tried a couple other roms in my phones section there's only like 9 of them there. I have the stock RUU but fails to detect the phone and fails i think it's meant to sense a turned on functional phone i don't see any kind of recovery method with the stock ruu. All i want is a rom to work with Straight talk the stock os even being unlocked and rooted with su still shoved the default APN down my throat(I even paid 2.99$ for the SQLlite and deleted all other APNs still won't let me check off a APN profile i created as default) making my signal on ST flakey and couldn't get mms to work just picture txting wasn't working. So i went full on like my old HTC One X but dived head first too fast didn't backup my old OS and didn't know firewater was gone till i was at that step of the procedure and it was too late Oh and using TWRP 2.7.1.0 it's the highest i can use before it won't boot.
Darthdiddy said:
I do the proper wipe before flashing my new rom, i'm under the AT&T HTC One M8 section i believe my phone was only @ 4.4.2 before this and here is the bootloader info is :
***Tampered***
***Unlocked***
M8_UL_CA_ PVT SHIP S-On
HBOOT-3.16.0.0000
RADIO-1.16.21331931.LA11G
OpenDSP-v38.2.2-00542-M8974.0311
OS-
eMMC-boot 2048MB
Apr 18 2014,16:06:33.22985
Tried cm-12-20150131-NIGHTLY-m8 it fails to flash and its on the sd and internal. SkyDragon M8 Sense Rom installs but doesn't boot (tried 2 versions of this rom 700mb and a 1.6gb), believe i tried a couple other roms in my phones section there's only like 9 of them there. I have the stock RUU but fails to detect the phone and fails i think it's meant to sense a turned on functional phone i don't see any kind of recovery method with the stock ruu. All i want is a rom to work with Straight talk the stock os even being unlocked and rooted with su still shoved the default APN down my throat(I even paid 2.99$ for the SQLlite and deleted all other APNs still won't let me check off a APN profile i created as default) making my signal on ST flakey and couldn't get mms to work just picture txting wasn't working. So i went full on like my old HTC One X but dived head first too fast didn't backup my old OS and didn't know firewater was gone till i was at that step of the procedure and it was too late Oh and using TWRP 2.7.1.0 it's the highest i can use before it won't boot.
Click to expand...
Click to collapse
Boot into fastboot, check device manager (if youre on windows) for any unknown drivers and install them if you can. Then run the RUU I posted here http://forum.xda-developers.com/att-htc-one-m8/help/100-stock-4-4-4-ruu-t3017594 which would update you to 4.4.4.
CavyS said:
Boot into fastboot, check device manager (if youre on windows) for any unknown drivers and install them if you can. Then run the RUU I posted here http://forum.xda-developers.com/att-htc-one-m8/help/100-stock-4-4-4-ruu-t3017594 which would update you to 4.4.4.
Click to expand...
Click to collapse
Ok TY i'll try that soon as it downloads, i did finally get RUU_M8_UL_K44_SENSE60_ATT_SECURITY_Cingular_US_1.58.502.1_Radio_1.16.21331931.LA11G_20.31A.4145.02L_release_368350_signed_2
To see the phone and no progress bar shows up on the phone and the program errors out, i even did a full system wipe before i tried it again still to no avail.
CavyS said:
Boot into fastboot, check device manager (if youre on windows) for any unknown drivers and install them if you can. Then run the RUU I posted here http://forum.xda-developers.com/att-htc-one-m8/help/100-stock-4-4-4-ruu-t3017594 which would update you to 4.4.4.
Click to expand...
Click to collapse
Ok tried that stock ruu and it failed i did finally get the phone running on a badseed rom based on 4.4.2 all seems to be working now except i can't send pictures in texts but regular text, calls, and internet work seems to be a common problem with straight talk. So new problem probably a thread somewhere on here about it i'll take a look, thank you for the help
Darthdiddy said:
Ok tried that stock ruu and it failed i did finally get the phone running on a badseed rom based on 4.4.2 all seems to be working now except i can't send pictures in texts but regular text, calls, and internet work seems to be a common problem with straight talk. So new problem probably a thread somewhere on here about it i'll take a look, thank you for the help
Click to expand...
Click to collapse
You'll have to setup your APN and mms message size settings for straight talk, that should fix the text messaging problems.
CavyS said:
You'll have to setup your APN and mms message size settings for straight talk, that should fix the text messaging problems.
Click to expand...
Click to collapse
No matter what message app i try i can't send pictures or large txts my mms is borked and to make matters worse when i installed this rom i must of removed the stock HTC messaging app so i can't find any settings to set the mms size limits. I'd like to figure out how to put the stock messaging app back on the phone without redoing the whole OS
Using Handcent and hangouts and i see no size limit options within the apps or anywhere in the phone settings. Looked up my phone specifically and where the option/s is supposed to be the said section of options is not even there.
If you've got a stock rom downloaded to your computer or sd card you can unzip it and look in system app folder and find the htc messaging apks. Then just install them as system apps and fix permissions.
Sent from my HTC One_M8 using XDA Free mobile app
Before i try and fix my obvious other problems does anyone know how to fix a bad flash of TWRP? I'm used to just adb command line flashing it and never had a issue before on my HTC One X, but seems it a was bad idea and it landed on boot partition and is causing glitches. is there a stock boot i can flash or what do i need?
Darthdiddy said:
but seems it a was bad idea and it landed on boot partition and is causing glitches.?
Click to expand...
Click to collapse
Why do you think that partition, in particular? If you are talking about boot.img, that gets re-flashed any time your flash a ROM.
Try fastboot erase cache, and flash recovery by fastboot. If Clockwork doesn't work, try TWRP.
If you indeed have some corrupted partition(s), your best bet is to RUU. You are non-specific about what error codes, so its hard to help you troubleshoot why the RUU failed. Try a more updated RUU, such as 2.23.
redpoint73 said:
Why do you think that partition, in particular? If you are talking about boot.img, that gets re-flashed any time your flash a ROM.
Try fastboot erase cache, and flash recovery by fastboot. If Clockwork doesn't work, try TWRP.
If you indeed have some corrupted partition(s), your best bet is to RUU. You are non-specific about what error codes, so its hard to help you troubleshoot why the RUU failed. Try a more updated RUU, such as 2.23.
Click to expand...
Click to collapse
Error 155 Unknown Error it says, do i need to relock the bootloader? I could never find a way to S-Off the device so idk if its that or corrupted partition like you said but all my services on my phone crash constantly. But that's better then aokp_task650_m8_kitkat_5.13.2014 that one won't even make it through setup the services crash so often the badseed rom is the only other rom i found that is actually usable. Oh my RUU is 2.0.16 how can i find the newest one for my HTC One M8?
Darthdiddy said:
Error 155 Unknown Error it says, do i need to relock the bootloader?
Oh my RUU is 2.0.16 how can i find the newest one for my HTC One M8?
Click to expand...
Click to collapse
You always need to relock the bootloader to run RUU with s-on. No exceptions.
Hopefully this will clear up your RUU problem, although the RUU number you just supplied above doesn't make any sense (doesn't correspond to any RUU for this device) Where did you find it, and its not what you referenced in Post #5 above.
CavyS already supplied a link for the "latest" AT&T RUU in Post #4 above. Although be aware, that if you are successful in running the latest RUU, it will render sunshine unable to achieve s-off. I suggest RUU to 1.58 or 2.23 (if you want s-off), as those should still be supported by sunshine.
Darthdiddy said:
I could never find a way to S-Off the device
Click to expand...
Click to collapse
Did you try sunshine? Its the only way to s-off at this time.
redpoint73 said:
You always need to relock the bootloader to run RUU with s-on. No exceptions.
Hopefully this will clear up your RUU problem, although the RUU number you just supplied above doesn't make any sense (doesn't correspond to any RUU for this device) Where did you find it, and its not what you referenced in Post #5 above.
CavyS already supplied a link for the "latest" AT&T RUU in Post #4 above. Although be aware, that if you are successful in running the latest RUU, it will render sunshine unable to achieve s-off. I suggest RUU to 1.58 or 2.23 (if you want s-off), as those should still be supported by sunshine.
Did you try sunshine? Its the only way to s-off at this time.
Click to expand...
Click to collapse
Relocked and flashed the ruu utility version said 2.0.16.2014 and is KK 4.4, idk about sunshine as to reading about people with my phone and it not working so for a 25$ leap of faith not sure what to do about that. My phone is running perfect now in a locked down carrier branded and bloatware way lol. Thanks guys, anyway i can tell if sunshine will work on my phone?
Darthdiddy said:
Relocked and flashed the ruu utility version said 2.0.16.2014 and is KK 4.4
Click to expand...
Click to collapse
I think that is the version of the actual installer software (.exe) not the ROM version it will install on your phone. Kitkat for AT&T would be either 1.58 or 2.23. That number will be in the actual file name of the RUU, so just look there (actually a much longer string of numbers starting with 1.58 or 2.23, but I've abbreviated them for convenience).
Darthdiddy said:
idk about sunshine as to reading about people with my phone and it not working so for a 25$ leap of faith not sure what to do about that. My phone is running perfect now in a locked down carrier branded and bloatware way lol. Thanks guys, anyway i can tell if sunshine will work on my phone?
Click to expand...
Click to collapse
You install the sunshine APK, run it, and sunshine will tell you whether it can s-off the phone or not. You won't be charged unless it can successfully s-off the phone. I haven't heard of any folks here that got charged, and sunshine couldn't s-off the device.
redpoint73 said:
I think that is the version of the actual installer software (.exe) not the ROM version it will install on your phone. Kitkat for AT&T would be either 1.58 or 2.23. That number will be in the actual file name of the RUU, so just look there (actually a much longer string of numbers starting with 1.58 or 2.23, but I've abbreviated them for convenience).
You install the sunshine APK, run it, and sunshine will tell you whether it can s-off the phone or not. You won't be charged unless it can successfully s-off the phone. I haven't heard of any folks here that got charged, and sunshine couldn't s-off the device.
Click to expand...
Click to collapse
Wow thanks for the info! Before i try this can after S-OFF/rooting/SU can i install the unlocked/developer ruu from HTC and get HTC OTA and get away from this bloated carrier branded crap? So much in the forums and i can't find a answer to this question anywhere.