Australian DROID RAZR XT910 - Motorola Droid RAZR

I have an DROID RAZR XT910 GSM/CDMA with the following stock ICS: 673.94.328.XT910.Optus.en.AU, Version 4.0.4, Build 6.7.3-94_SPI-328 and while looking at all the mods and roms out there I'm not confident in flashing this device because the version numbers are different and I don't wanna brick my phone (at close to AUD$800 I think you can understand why) so need help with getting JB onto it (impatient here in OZ, last round from GB to ICS took 6 months from advertised to actually going OTA here). Phone is rooted, have Titanium Backup and SuperSU installed but:
1: don't know how to back up the whole stock in case of failure and need to reinstall
2: not sure that any ROMs are safe to use in my phone (differing stock numbers etc)
3: what other software needed to make this happen
Can anyone please help!?! (where's that old interrobang when you need it)

SimonTWolf said:
I have an DROID RAZR XT910 GSM/CDMA with the following stock ICS: 673.94.328.XT910.Optus.en.AU, Version 4.0.4, Build 6.7.3-94_SPI-328 and while looking at all the mods and roms out there I'm not confident in flashing this device because the version numbers are different and I don't wanna brick my phone (at close to AUD$800 I think you can understand why) so need help with getting JB onto it (impatient here in OZ, last round from GB to ICS took 6 months from advertised to actually going OTA here). Phone is rooted, have Titanium Backup and SuperSU installed but:
1: don't know how to back up the whole stock in case of failure and need to reinstall
2: not sure that any ROMs are safe to use in my phone (differing stock numbers etc)
3: what other software needed to make this happen
Can anyone please help!?! (where's that old interrobang when you need it)
Click to expand...
Click to collapse
Hi!
I'm an Aussie user but bought mine through Kogan (so it's a German phone). If you've already rooted the phone and have Stock ICS I'd recommend installing SS3.11 or BMM and running another JB ROM rather than try to flash stock.
There's heaps of threads with great ROMs on here and the Development thread:
http://forum.xda-developers.com/showthread.php?t=2162827
http://forum.xda-developers.com/showthread.php?t=2028020
Personally I use SS3.11 with CM10.1 as my daily and it's fine. I can also recommend AOKP4.22 which is now officially supported on XT910.
Benefit of this setup is that I can also boot back to stock whenever I want.
Cheers and happy flashing!
:victory:

Big UPS
philharmonick said:
Hi!
I'm an Aussie user but bought mine through Kogan (so it's a German phone). If you've already rooted the phone and have Stock ICS I'd recommend installing SS3.11 or BMM and running another JB ROM rather than try to flash stock.
There's heaps of threads with great ROMs on here and the Development thread:
http://forum.xda-developers.com/showthread.php?t=2162827
http://forum.xda-developers.com/showthread.php?t=2028020
Personally I use SS3.11 with CM10.1 as my daily and it's fine. I can also recommend AOKP4.22 which is now officially supported on XT910.
Benefit of this setup is that I can also boot back to stock whenever I want.
Cheers and happy flashing!
:victory:
Click to expand...
Click to collapse
many thanks, as I don't want to touch the stock at all I'm using this method (ss3 and aokp/cm10.1 tri-boot {keeping the stock I'll have three systems})

SimonTWolf said:
many thanks, as I don't want to touch the stock at all I'm using this method (ss3 and aokp/cm10.1 tri-boot {keeping the stock I'll have three systems})
Click to expand...
Click to collapse
This is a bit late to see this thread, but there is a thread for the retail.au 4.1.2 official. If you do a search of the forum with "retail" and "au" you'll find it. Stock rom that needs to flash a kernel first.
First be sure to root if you're still on ICS. There's a one-click root tool in the development section.
Requires BMM 0.3.4, from there you can install the recovery and reboot into it. It allows you to do a nandroid backup.

dabanhfreak said:
This is a bit late to see this thread, but there is a thread for the retail.au 4.1.2 official. If you do a search of the forum with "retail" and "au" you'll find it. Stock rom that needs to flash a kernel first.
First be sure to root if you're still on ICS. There's a one-click root tool in the development section.
Requires BMM 0.3.4, from there you can install the recovery and reboot into it. It allows you to do a nandroid backup.
Click to expand...
Click to collapse
thx mate, not impressed with AOKP or CM10 so hopefully the 4.1.2 official will keep me happy

Related

Safestrap question

Alright guys, while I patiently await the official ICS upgrade I have decided I wanted to play with some of the roms. I'm a little confused on the whole locked bootloader and stuff that the Razr has. I have the Razr Maxx and wanting to get some pointers on what to do. I want to try MIUI and another ICS build. Should I install Safestrap and then what should I do? I already have it rooted and on .181
Any help I appreciate it, I'm used to installing CWM and going that route but I haven't used a Moto Android in awhile.
collins521 said:
Alright guys, while I patiently await the official ICS upgrade I have decided I wanted to play with some of the roms. I'm a little confused on the whole locked bootloader and stuff that the Razr has. I have the Razr Maxx and wanting to get some pointers on what to do. I want to try MIUI and another ICS build. Should I install Safestrap and then what should I do? I already have it rooted and on .181
Any help I appreciate it, I'm used to installing CWM and going that route but I haven't used a Moto Android in awhile.
Click to expand...
Click to collapse
I would definitely install safestrap and get some ROMs' and tweaks going.
To install a ROM follow this guide: http://droidrazrroot.com/droid-razr-hacks/how-to-install-rom-on-rooted-droid-razr/
For ROMs' I would recommend Gummy and Eclipse. Eclipse for a more stock Gingerbread experience with better battery life and performance. Gummy for an ICS feel with lots of features.
Having a locked bootloader means that we can't flash custom kernels and radios until a bypass is found or Motorola unlocks them for us.
Hope I helped!
Leviathan26 said:
I would definitely install safestrap and get some ROMs' and tweaks going.
To install a ROM follow this guide: http://droidrazrroot.com/droid-razr-hacks/how-to-install-rom-on-rooted-droid-razr/
For ROMs' I would recommend Gummy and Eclipse. Eclipse for a more stock Gingerbread experience with better battery life and performance. Gummy for an ICS feel with lots of features.
Having a locked bootloader means that we can't flash custom kernels and radios until a bypass is found or Motorola unlocks them for us.
Hope I helped!
Click to expand...
Click to collapse
Ya I figured out the kernels and radios from the bootloader but I also wanted to make sure I don't fubar my upgrade path and be able to upgrade on official ICS when it drops. I know to stay away from some of the leaks from reading what people are saying on here and other forums.
Also if I have this safestrapped, flash a rom and then want to go back to stock the way I have it laid out I can just relock or whatever it is in recovery and it will boot into stock instead of the custom rom?
collins521 said:
Also if I have this safestrapped, flash a rom and then want to go back to stock the way I have it laid out I can just relock or whatever it is in recovery and it will boot into stock instead of the custom rom?
Click to expand...
Click to collapse
Yes, if you toggle safe system when your in the safe system/system you have the custom ROM installed on all your data from your original ROm will be restored. Ask questions if you're confused, nobody likes a data wiped phone.
Also, I know this is probably a redundant comment, but be SURE to make a nandroid backup of your stock rom, just so in case things go pear-shaped you can always reflash back to before the problem.
Be warned though that many of the ICS builds currently do have some bugs...
Most notable is the lack of hardware acceleration, which means no Flash or embedded videos until the official ICS is released...Not a hugely big deal for me, but some find this crucial.
I have been using J.Y.Daddy's port of CM9 for GSM and I love it. Very good looking rom, excellent features and intuitive organisation. Overall, 10/10. Definately would bang.
But yeah, nandroid backup is key. Just keep it on a USB stick nearby if you have little space on you SD.
Have a ball with custom roms man! It's what makes Android the best OS in my opinion.

JB Bootloader and other??'s

Hey all. Quick question for ya. I am going to flash one of the JB roms to my wifes galaxy tab 10.1 this weekend.
She is currently running task's honeycomb rom. She has been running that for a good 5 months now.
What order do I proceed to get her to JB??
Must I flash an ICS rom first then flash a JB rom??
Do I need to flash a JB bootloader or an ICS bootloader?? If so where can I find them. Been searching the forum with no luck.
Any other info would be greatly appreciated. Specifically the orders or anything I have overlooked.
Thanks in advance,
Nycorduroy
not mandatory to have an ICS step, you can directly go to JB.
you just need CWM, you probably already have it if you are running task's rom.
backup your app (titanium is a great tool in my opinion)
copy rom file to your tab
make a full wipe (+cache +davilk)
flash rom
reboot and enjoy
nycorduroy said:
Hey all. Quick question for ya. I am going to flash one of the JB roms to my wifes galaxy tab 10.1 this weekend.
She is currently running task's honeycomb rom. She has been running that for a good 5 months now.
What order do I proceed to get her to JB??
Must I flash an ICS rom first then flash a JB rom??
Do I need to flash a JB bootloader or an ICS bootloader?? If so where can I find them. Been searching the forum with no luck.
Any other info would be greatly appreciated. Specifically the orders or anything I have overlooked.
Thanks in advance,
Nycorduroy
Click to expand...
Click to collapse
This does not belong in the Development section. All questions need to be put into the Q&A section. Please do that from now on.
With that said, I am not sure about the bootloader but you probably need to update your version of CWM recovery, and you can find out about that as well as the bootloader stuff in the threads for CM10/JB. Pershoot's threads are probably a good place to look as well.
Edit: well someone got to it first, follow their instructions as well
nycorduroy said:
Must I flash an ICS rom first then flash a JB rom??
Click to expand...
Click to collapse
Yes, Pershoot stated in Android 4.1.1 - CyanogenMod 10 Preview thread that you need to have a US HC or ICS bootloader in order not to have charging SODs. If you have a US bootloader you should be fine if not flash a stock US HC or ICS rom via Odin before you flash CM10 (you'll loose all data on the tab). Alternatively there are flashable US bootloaders but I've never tried one. I can't put the links because search feature is is temporarily unavailable.
Finally, You could still get charging sods and some wifi problems etc. even if you came from a US bootloader. Pershoot says a small minority will face these issues no matter what. A hard reset fixes these issues temporarily. If you could wait a little bit more a new cm10 is on the way with 3.1 kernel which is supposed to work fully functional. But still, I think current CM10 is the best rom available right now.

How do i get back to original rom

hi guys,
i have a samsung galaxy s2 (GT-i9100 - NFC), which i got from orange end of 2011. I the in jan 2012 got help from this forum to root my phone and change the rom from the original to:-
Rom & Build No: VillianROM 3.0
And' ver: 2.3.5
Baseband: i9100XXki1
Kernel: 2.6.35.11-ninphetamine-2.0.5+ninpo @ titan #20
Although the phone works okay, i'm beginning to notice a lot of slowdowns and regular reboots, so i want to go back to whatever latest google android OS the S2 can handle (rooted). I've forgotten what to do and would be most grateful if someone could please help me with the following:-
1. Whats the best software/method to backup everything?
2. What is the latest rom (original, but should not have a provider's bloatware) i can use on the S2?
3. Once backed up, how do i change from VillianRom to the latest/best OS currently available?
4. How can i root the original rom?
Thanks once again
Check
www.galaxys2root.com
I think it ll help you and save you time
Sent from my GT-N7100 using Tapatalk 2
Thanks oxi - there are quite a few roms on there and i simply want the latest official one which i can root. From your experience which is currently the most popular rom?
wowandroid said:
Thanks oxi - there are quite a few roms on there and i simply want the latest official one which i can root. From your experience which is currently the most popular rom?
Click to expand...
Click to collapse
For official stock rom, check
www.sammobile.com
And search latest stock rom for your region.
If you like custom rom, then there are so many roms on xda. I like omega and alliance roms. Choice varies from person to person
Sent from my GT-N7100 using Tapatalk 2
wowandroid said:
1. Whats the best software/method to backup everything?
2. What is the latest rom (original, but should not have a provider's bloatware) i can use on the S2?
3. Once backed up, how do i change from VillianRom to the latest/best OS currently available?
4. How can i root the original rom?
Thanks once again
Click to expand...
Click to collapse
1. Depends. You can do a backup in CWM to image your device or you can use Titanium Backup Pro to just backup your apps/appdata and restore to new rom.
2. http://www.sammobile.com/firmware/ < Check your device/model here.
3. Well just so you're clear, There is no "best" its subjective. Also "latest" depends on what type of rom you want to flash like Sammy/AOSP/AOKP/CM/MIUI etc. To flash latest samsung do it via ODIN, to flash any other do it via CWM. All info you need is already on forum.
4. By flashing custom kernel via ODIN.
All your questions have already been answered countless times.
Thanks very much guys. I simply want a fast lean rom as some seem to be slow running.
Doesn't get better than this.
sendign the phone for warranty?
you will need to flash back the original rom and unroot your phone.
if they found your phone is rooted the warranty void, experience it before so be aware of this.
Let me thank you guys for advicing me. I am most grateful. I read your posts a bit late and in the meantime, I think i have bricked my phone as i've flashed Samsung's original FW (I9100PBVLP8_I9100PORALP8_ORA) from sammobile.com. I used Odin v3 and successfully flashed the phone, but it's simply stuck on the boot logo. I have even done the following:-
I've managed to wipe the cache partition, but the recovery menu has No advanced options. It says:-
ANDROID SYSTEM RECOVERY <3a>
reboot system now
apply update from ext' storage
wipe data/factory reset
wipe cache partition
apply update from cache
test redband fota[FS]
But i still cannot get it to boot. I have also tried to use an old nandroid.md5 backup i made, but odin reports the file as invalid.
I'm desperate guys, please could someone help me.
Download Mode and re flash.
Are you sure you are flashing the right ROM right? Check under the battery to see the Device Model.
If it's i9100, then make sure you are downloading a i9100 ROM.
Thanks very much for your advice gastonw - i have managed to fix the problem now by going into system recovery and doing a factory reset, so thank you.
Although everything seems to be working fine, i would have preferred a more newer 4.2 jelly bean rather than 4.0.3. Oh well beggars can't be choosers and all that, lol! I guess i'll have to re-root it again.
gastonw mate ur a star! I've installed the latest JB rom u posted earlier and i'm very happy with it.
Now before i damage it beyond repair, how do i root it safely?
wowandroid said:
gastonw mate ur a star! I've installed the latest JB rom u posted earlier and i'm very happy with it.
Now before i damage it beyond repair, how do i root it safely?
Click to expand...
Click to collapse
Hi You could try this method http://forum.xda-developers.com/showthread.php?t=1501719 its quite safe so ether should work or wont, if don't no harm done as it doesn't need a insecure kernel.
I'm quite new myself @ this so plz use caution when trying it out.
Peace
wowandroid said:
gastonw mate ur a star! I've installed the latest JB rom u posted earlier and i'm very happy with it.
Now before i damage it beyond repair, how do i root it safely?
Click to expand...
Click to collapse
Good to know man, enjoy it
About root, I've seen a couple of methods laying around the threads, I'm sure they're safe.
I still think that ExynosAbuse app is the fastest way to Root now (one-click).
Here's a vid. I never tried it tho.
Thanks very much for the links AnubuRe and Gastonw.
Gastonw mate, i have been playing with the rom you posted a link to. Don't get me wrong, it's great and very fast, but the downside is that it doesn't have a huge number of options to tweak etc. Now someone mentioned a rom called Neatrom, but i'm wondering what you can recommend? I don't want a bloated rom...i want a fast rom, but with some options to allow me more greater control over the phone.
Also, i know this is a bit off-topic, but can you recommend me a widget app, where i can quickly dial phone numbers i.e. by touching a person's photo?

[Q] what is my atrix 4g status?

Thank you for the answer for the old question.
I want to install http://forum.xda-developers.com/showthread.php?t=2167927 this.
I have epinter CM10.1 now.
What I need to do?
Do I need just enter the CWM and wiped everything and then flash the zip file?
or I need to do something more?
OLD:
I rooted my device with some quick root tool. (I don't remember where I found the guild).
I have unlocked my bootloader too. (I don't really remember but I think I made that with a guild from androidadvices. His title is :"How to Unlock Motorola Atrix 4G Mobile Phone")
My device is bought from ORANGE. (I think that I belong to Bell's group of ROMs. not AT&T).
I have flashed CM10 by epinter and then CM10.1 by epinter.
Now I want to give the phone to my little brother and I want to flash a ROM with all the webtop apps and blur apps.
I want a ROM with the minimum bugs. I prefer based of official 2.3.6 ROM
What ROM can you suggest me?
Do I need to do some changes with the phone before wipeing everything in the CWM and flashing ROMs ?
Thanks ahead.
This is based on 2.3.6 and is an updated version of a rom that many of us used for a long time as our daily driver.
http://forum.xda-developers.com/showthread.php?t=2167927
mizaro said:
I rooted my device with some quick root tool. (I don't remember where I found the guild).
I have unlocked my bootloader too. (I don't really remember but I think I made that with a guild from androidadvices. His title is :"How to Unlock Motorola Atrix 4G Mobile Phone")
My device is bought from ORANGE. (I think that I belong to Bell's group of ROMs. not AT&T).
I have flashed CM10 by epinter and then CM10.1 by epinter.
Now I want to give the phone to my little brother and I want to flash a ROM with all the webtop apps and blur apps.
I want a ROM with the minimum bugs. I prefer based of official 2.3.6 ROM
What ROM can you suggest me?
Do I need to do some changes with the phone before wipeing everything in the CWM and flashing ROMs ?
Thanks ahead.
Click to expand...
Click to collapse
Nottachtrix for sure will be the best option, there is another v2 version with a lot of things in the installer
coolloser said:
This is based on 2.3.6 and is an updated version of a rom that many of us used for a long time as our daily driver.
http://forum.xda-developers.com/showthread.php?t=2167927
Click to expand...
Click to collapse
joelorona said:
Nottachtrix for sure will be the best option, there is another v2 version with a lot of things in the installer
Click to expand...
Click to collapse
Wow, The answer is given very quickly and it very good. Thank you both
Do I need to do some changes with the phone before wipeing everything in the CWM and flashing ROMs ?

[Q] Samsung galaxy s2 firmware problem

Hi there,
I have the galaxy s2 from about a year ago, bought it form Dubai. Anyways till now I still didn't get the jelly beans update 4.1.2 and I'm stuck with the 4.0.3. I'm starting to face some problems with my device and I think this is because bugs in the 4.0.3, the device over heats while charging or when I have my wifi or 3G on. I downloaded the "AOKP MR1 Milestone 1 ROM for Galaxy S2 GT-i9100 (Exynos)" along with "Gapps" but didn't install them yet:
The only problem is that in order to install the new rom I have to flash my device and root it and I'm not really happy with that. Is there a safe way to get the jelly beans update 4.1.2 without rooting my device. I tried the over the air update but it said no updates found, I also tried kies and still no luck. What can I do to get the new update without having to erase everything on my device.
Also can I take a backup copy of my ROM in case I format "flash" my device for any reason. I want to take a complete backup of everything on my phone including the unrooted original firmware 4.0.3 that it came with so that even if I install any other rom I can flash it and get back with my original one, is this possible.
Please help, looking forward for your repiles
You didnt read at all did you :thumbdown:
andrewwright said:
You didnt read at all did you :thumbdown:
Click to expand...
Click to collapse
I'm actually very new to xda, I've been searching for about 4 days now and currently I'm reading other similar threats on xda. But I don't really know where or what to search for. All I want to do is update my phone without flashing it, also if it's possible to take a backup copy of my original firmware please reference me where to start. Didn't mean to bother or bug anyone here, it's just that I'm very new to this
No hard feelings
You need to root to bk up what you have now mate. 4.0.4 is the brick bug firmware not 4.0.3 . Do you want to root your phone.? Do you want to put a custom rom or Samsung rom on your phone?
Just go to sammobile.com firmware page.
--------------------------------
maybe iPhone is better for you
--------------------------------
andrewwright said:
You need to root to bk up what you have now mate. 4.0.4 is the brick bug firmware not 4.0.3 . Do you want to root your phone.? Do you want to put a custom rom or Samsung rom on your phone?
Click to expand...
Click to collapse
Thanks for your reply, how do I root my phone and after I root it what do I need to download to backup everything. I don't really prefer to have a custom rom on my device but I have no problem trying anything on at as long as I have a copy of the original firmware where I can restore it back.
theunderling said:
Just go to sammobile.com firmware page.
--------------------------------
maybe iPhone is better for you
--------------------------------
Click to expand...
Click to collapse
Thanks I'll check it out, what do I look for so I can make sure that it's compatible with my GT-I9100 device, or are they all compatible depending on which region I choose. Currently I'm in Egypt So whats the best firmware to download
Get whatever ROM you want.
Worst case, flash a new modem.
Sent from the little guy
Lsw is the new one. Uk base but as gastonw said it dont matter just download your modem you have now so you can restore it later "apriliam3 for them". To root get a dori ics kernel and flash that either with odin "tar" or in recovery "zip with sig" put on ext sd and update in stock recovery and that will give you root and cwm recovery when you have done that go back into recovery and do a nandroid bk up there. Get titanium back up in playstore and bk up your apps with. I link my contact's with google so they restore easily.
Just see chow to flash ROM's witch odin and choose ROM from Samsung development sub forum.
Thank you all for your replies,
I managed to root my device and advised by all of you, and I made backup using the cwm that was installed automatically after I successfully rooted it. In the backup folder that was created I noticed a file called "system.ext4.tar" is this the original android version that came with the phone because as I mentioned above I want to be on the safe side and have a backup of my original OS that came with the phone in case of anything went wrong then I can restore everything including the original current android version. Second step that I want to do is to flash my phone and install the jellybeans. I found two version version 4.1.2 which I know is compatible with the phone and version 4.2.2 but I'm not really sure if it's compatible or not. So what do you guys suggest I should install on my device
looking forward for your replies
Get ktool of play and bk up efs :thumbup: go with what you want 4.1.2 stock/custom or 4.2.2 custom. its up to you just make sure you flash right rom for your phone model
andrewwright said:
Get ktool of play and bk up efs :thumbup: go with what you want 4.1.2 stock/custom or 4.2.2 custom. its up to you just make sure you flash right rom for your phone model
Click to expand...
Click to collapse
Thanks for your reply could you guide me on how to flash with the right rom, still new to this
All the people that has helped, you thanked...none use guides :thumbup:
andrewwright said:
All the people that has helped, you thanked...none use guides :thumbup:
Click to expand...
Click to collapse
would you guide me on the right track i'll thank you as well
Dont want or need your thanks its polite to say thanks to some one who helps you. What do you want stock or custom. Dont ask me to pick.
andrewwright said:
Dont want or need your thanks its polite to say thanks to some one who helps you. What do you want stock or custom. Dont ask me to pick.
Click to expand...
Click to collapse
A special thanks goes to andrewwright I prefer stock but I don't have any problems trying custom since custom gives more features
If you would tell me how to do both I'll be more than happy. I think both are flashed in the same way but correct me if I'm wrong
For stock sammoblie.com.
For custom gooim playstore app. Have you rooted yet? Mr1 milestone is a good choice as is solid.
andrewwright said:
For stock sammoblie.com.
For custom gooim playstore app. Have you rooted yet? Mr1 milestone is a good choice as is solid.
Click to expand...
Click to collapse
Yes I've rooted my device, so which is the best, most solid custom version you mentioned milestone where do I download that from as well
Play store app called gooim donwload that. Has loads of Roms. Aokp jb milestone. Is stable. Solid

Categories

Resources