Hello, I created official base for LG L7 P700 on Sourceforge servers. They're giving us the best downloading transfers
I am not responsible if installing roms and following this guides your L7 brick, explode, burn etc.etc
SORRY FOR MY ENGLISH
SOURCEFORGE
1. FLASHING TOOL KDZ DOWNLOAD
2. USB DRIVERS FOR KDZ DOWNLOAD
3. CyanogenMOD 10
a) Gapps: DOWNLOAD
b) Kernel 1,3GHz v1.3.1by tudorsirb: DOWNLOAD
c) ROM(29-04-2013): DOWNLOAD
4. Rooted official firmwares
a) v10k: DOWNLOAD KDZ | DOWNLOAD FLASHABLE ZIP
b) v20a: DOWNLOAD
5. Unlocking bootloader + cwm for v10k DOWNLOAD
6. ClockWorkMod Recoveries
a) Touch: DOWNLOAD
b) Non-Touch: DOWNLOAD
7. Official firmwares
a) Ice Cream Sandwitch 4.0: DOWNLOAD
b) Jelly Bean 4.1: DOWNLOAD
Click to expand...
Click to collapse
How to...
...flash official firmware via KDZ?
Code:
1. Install KDZ drivers[URL="http://sourceforge.net/projects/lgl7mods/files/%5BP700%5D%20LG%20L7/USB%20Drivers/USB%20DRIVERS.zip/download"] [Download][/URL]
2. Download KDZ flashing tool [URL="http://sourceforge.net/projects/lgl7mods/files/%5BP700%5D%20LG%20L7/KDZ%20FlashTool/KDZ%20FlashTool.zip/download"][Download][/URL]
3. Run Windows Enabler.exe and double click on icon in SysTray to enable it (On)
4. Install msxml.msi
5. Run UpTestEX_mod2_marwin.exe
6. If you want to flash from system level you need to select DIAG mode.
If you want to flash from Emergency choose EMERGENCY.
7. Select 3GQCT
8. In "select KDZ file" choose official KDZ firmware
9. Click start upgrade
Screenshot: [url]http://img835.imageshack.us/img835/2846/23750981.png[/URL]
10. After flashing application may crash.
...flash rooted firmware via KDZ?
Code:
1. Install KDZ drivers[URL="http://sourceforge.net/projects/lgl7mods/files/%5BP700%5D%20LG%20L7/USB%20Drivers/USB%20DRIVERS.zip/download"] [Download][/URL]
2. Download KDZ flashing tool [URL="http://sourceforge.net/projects/lgl7mods/files/%5BP700%5D%20LG%20L7/KDZ%20FlashTool/KDZ%20FlashTool.zip/download"][Download][/URL]
3. Run Windows Enabler.exe and double click on icon in SysTray to enable it (On)
4. Install msxml.msi
5. Run KDZ_FW_UPD.exe
6. If you want to flash from system level you need to select DIAG mode.
If you want to flash from Emergency choose EMERGENCY.
7. Select 3GQCT
8. In "KDZ file" choose rooted KDZ firmware
9. Click Launch software firmware
Screenshot: [url]http://img825.imageshack.us/img825/1404/68119584.png[/URL]
10. After flashing application may crash.
...back to stock from CyanogenMOD?
Code:
I found the best way (tested) how to back from Cyanogen
1. Download this flashable official firmware [URL="http://sourceforge.net/projects/lgl7mods/files/%5BP700%5D%20LG%20L7/Rooted%20ROMs/v10k/v10k_ROOTED_CWM.zip/download"][Download][/URL], [URL="http://d-h.st/j3J"]WiFi Fix [/URL]
and [URL="http://d-h.st/XIl"]keyboard fix[/URL] and put it on sdcard
2. Go into recovery
3. Wipe data/factory reset | Wipe cache partition | Advanced > Wipe dalvik cache
4. Choose zip from sdcard > flash rom > flash wifi fix > flash keyboard fix
5. Reboot recovery
6. Now you can flash official Jelly Bean or ICS via KDZ
...change recovery for touch/non-touch?
Code:
1. Download from 1st post recovery and unzip.
2. Enable Debugging USB
3. Plug your phone to PC
4. Start flash_recovery.bat
5. Done. Reboot to recovery.
...change MAC on CM10?
Code:
All users have the same adress MAC on CyanogenMOD - 00-0A-F5-89-89-80
1. Install root explorer
2. Go to system\etc\firmware\wlan\
3. Click Mount R/W -> R/O
4. Hold your finger on WCN1314_qcom_cfg.ini and click Open in text editor.
5. Search 000AF5898980 and change it to your MAC for example 112233445566
6. Reboot phone. Your mac now is 11-22-33-44-55-66
great work bro ...
thanks alot
There is no need for WiFi Fix and Keyboard when flashing back to V10K from CyanogenMod 10 man
Wolf80 said:
There is no need for WiFi Fix and Keyboard when flashing back to V10K from CyanogenMod 10 man
Click to expand...
Click to collapse
this fixes are for Stock rooted rom. if you want to stay on it.
How to back from official Jelly Bean to ICS?
dami7bl said:
How to back from official Jelly Bean to ICS?
Click to expand...
Click to collapse
1st tutorial should working
Одг: [LG L7 P700][Sourceforge][Files Base][Tutorials|Official firmwares|CyanogenMOD 1
Anyone try this?
Sent from my LG-P700 using xda app-developers app
weather widget
you can get weather widget for the 20a version? when you try to download it does not appear in the download manager the official rom. Thank you.
i want to install CM10 ROM and i get this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What do I do?
david08 said:
i want to install CM10 ROM and i get this message:
What do I do?
Click to expand...
Click to collapse
try redownload file
---------- Post added at 12:20 PM ---------- Previous post was at 12:15 PM ----------
Is there way to root 20a_00
leoncropro said:
try redownload file
---------- Post added at 12:20 PM ---------- Previous post was at 12:15 PM ----------
Is there way to root 20a_00
Click to expand...
Click to collapse
Same......
david08 said:
Same......
Click to expand...
Click to collapse
Then update u cwm via cwm manager from google play
leoncropro said:
Then update u cwm via cwm manager from google play
Click to expand...
Click to collapse
yes
V6.0.2.8
but ist not helped, stil error
1.2 kernel
Well the overclock kernel work's just awesome ,with cm10 still minor bugs , and i hate that is no move to sd option but rocking alot better than stock firmware
leoncropro said:
try redownload file
---------- Post added at 12:20 PM ---------- Previous post was at 12:15 PM ----------
Is there way to root 20a_00
Click to expand...
Click to collapse
In the 1st post there is the rooted v20a with CWM it's the same as the just released official version.
Sent from my LG-P700 using xda app-developers app
It's work!!!!
thank you!
The problem was in the CWM so i install another version
(V5.0.2.7)
I used your method to get the V20A update on my P705G and the update went well but when I tried to flash back the stock V10E ics kdz, it keeps coming up errors wparam 100 and lparam 1002. I followed your directions exactly. Please help!
Solve it
leoncropro said:
try redownload file
---------- Post added at 12:20 PM ---------- Previous post was at 12:15 PM ----------
Is there way to root 20a_00
Click to expand...
Click to collapse
david08 said:
i want to install CM10 ROM and i get this message:
What do I do?
Click to expand...
Click to collapse
I had the same problem, there is another way to solve it... i dont think the problem was in CWM..
http://youtu.be/8sNt3ldGQL0?t=1m56s
what does DIAG means? because the only method that i tried before was by emergency mode..
Related
After a long time, I think this will helpful for any one to back to stock or install other rom cook request you have been reflash your phone by flashtool.
Ex: [New!][ROM][JB][.100] BeAnZ/Google™ BeAnZ Lite 2014/01/01
To install that rom you have been:
kinglauryl said:
Instructions:
1. Make sure you are running Xperia go ST27i JB firmware 6.2.A.1.100. (Go to settings>About phone, scroll down to the button of
screen and check build number to confirm) (If your phone is rooted with CWM installed and init.d enabled, proceed to instruction #4)
2. Download the JBeAnZKit.7z file and the ROM AromaBeAnZ2014.zip.
3. Extract JBeAnZKit.7z to your PC, inside the .7z file, you will find 2 folders. The folder "ERT17MOD" will be
use to root your phone, just follow instruction. After root program is installed, phone will reboot. Open app drawer on phone and look for
Uni-init. Run the program and press "Activate" to enable init.d.
4. The second folder "CWM5504" will be use to install Clockworkmod recovery (CWM).
JBeAnZKit7z is 4.84MB, link is http://www34.zippyshare.com/v/94189288/file.html
NOTE: Guide on rooting and installing CWM on Xgo https://sites.google.com/site/myxgos...clockworkmod-1 and for enabling init.d use this link
https://sites.google.com/site/myxgos...ildprop--initd
5. Download the file "AromaBeAnZLiteROM.zip" or "AromaGoogleBeAnZLiteROM.zip" to your SD Card or internal storage (not microSD)
6. Reboot to CWM
7. Select "install zip from SDCard"
8. Select "choose zip from SDCard" and select "AromaBeAnZLiteROM.zip" or "AromaGoogleBeAnZLiteROM.zip"
9. After flashing is finished, phone will reboot itself. (Dalvik will be wiped automatically)
10. After boot, do a factory reset (checked "Erase internal storage")
11. Enjoy!
Click to expand...
Click to collapse
But now with this you only begin from:
kinglauryl said:
Instructions:
1. Restore Nandroid Image
...
2. Download the file "AromaBeAnZLiteROM.zip" or "AromaGoogleBeAnZLiteROM.zip" to your SD Card or internal storage (not microSD)
3. Reboot to CWM
4. Select "install zip from SDCard"
5. Select "choose zip from SDCard" and select "AromaBeAnZLiteROM.zip" or "AromaGoogleBeAnZLiteROM.zip"
6. After flashing is finished, phone will reboot itself. (Dalvik will be wiped automatically)
7. Enjoy!
Click to expand...
Click to collapse
Save alot time to test more rom.
How make this:
Flash ST27i_6.2.A.1.100_1264_7472.tft by flashtool
Install Phantom kernel
Backup by Nandroid
How to Use:
Download this image
Extract file to any where and rename to "Stockwithphantom"
Copy or cut folder "Stockwithphantom" to SDCARD or EXTCARD \ clockworkmod \ backup
Reboot to CMW
Restore "Stockwithphantom"
Install orther rom or use stock if like.
Download:
My Host: http://caracantho.myDS.me:5000/fbsharing/XyRwzqvp
Dev-Host: Part 1 Part 2
Thanks to: @kinglauryl to make alot rom perfect. @Pwng3 for kernel @munjeni for CMW tourh. @netmaniack for TFT image
From this image you can install:
[ROM][JB][.100][New] JBeAnZ v2.2 (Dark and Light) 2013/08/31
[New] Google™ BeAnZ 2.0 (Xgo Google™ Edition) 2013-11-09 [ROM][JB][.100][LBL/UBL]
[New] BeAnZ 2014 (2013-12-02) [ROM][JB][.100][LBL/UBL]
[New!][ROM][JB][.100] BeAnZ/Google™ BeAnZ Lite 2014/01/01
And every rom request stock rom installed
Bug Fix:
Get Access to root after install.
Great
i´ll try it now.
Can you tell me something about the battery life? increase or decrease? better battery-performance balance?
Thank you very much !!!
Regards, Chris
dhchris said:
Great
i´ll try it now.
Can you tell me something about the battery life? increase or decrease? better battery-performance balance?
Thank you very much !!!
Regards, Chris
Click to expand...
Click to collapse
I don't MOD any thing this image. I make this is faster way for any one need reflash by flashtool
Ok, great,
i tried few times to flash the phantomkernel before installing the BeAnZ Lite Rom but it don´t work.
I thought maybe you can tell me about the battery life.
Now i try it again.
dhchris said:
Ok, great,
i tried few times to flash the phantomkernel before installing the BeAnZ Lite Rom but it don´t work.
I thought maybe you can tell me about the battery life.
Now i try it again.
Click to expand...
Click to collapse
I use this image to install BeAnZ 2014. Now I have BeAnZ 2014 with phantom kernel.
I use my GO after install in 2 day not changing. I read news, play some game, call and sms. smooth and comfortable.
sounds good, downloading... thank you
---------- Post added at 01:47 PM ---------- Previous post was at 12:47 PM ----------
getting a MD5 mismatch! Error while restore is starting...
Nice work!
Nice work googlesky, thanks for supporting my ROMs!
dhchris said:
sounds good, downloading... thank you
---------- Post added at 01:47 PM ---------- Previous post was at 12:47 PM ----------
getting a MD5 mismatch! Error while restore is starting...
Click to expand...
Click to collapse
Can you download again, plz? I was test some Xperia Go and It work. I will upload new link if you want!
Gửi từ ST27i của tôi bằng cách sử dụng Tapatalk
downloading... but takes some time, hoster is very slow, i´ll get back later, ± one hour
dhchris said:
sounds good, downloading... thank you
---------- Post added at 01:47 PM ---------- Previous post was at 12:47 PM ----------
getting a MD5 mismatch! Error while restore is starting...
Click to expand...
Click to collapse
If second download gives also MD5 mismatch error, try this.
Create a txt file with no text in it. Then change the extention of the file from .txt to .md5 and replace the old file with this one. The CWM will then pass the md5 check and continue with the restore process.
psylos said:
If second download gives also MD5 mismatch error, try this.
Create a txt file with no text in it. Then change the extention of the file from .txt to .md5 and replace the old file with this one. The CWM will then pass the md5 check and continue with the restore process.
Click to expand...
Click to collapse
........ Deleted by me .........
Edit:
I solved the mismatch problem.
Don't give the Backupfolder a space in his name.
Some CWM-Recoverys cannot handle this spaces.
I renamed the folder from "Stock with phantom" to "Stockwithphantom" and it works.
Now testing and report the result tomorrow.
Greetings,
Chris
If after install rom cook can't access root plz folow this tut to fix it:
Check your root by enter SuperSU if SuperSU ask to install plz folow step 2.
Reboot to CMW and flash SuperSU
Reboot to system and check your access root.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update new SuperSU v1.9.1 fix some apk not work on root
Dear googlesky,
Sorry for the stupid question.
did we need to unlock the bootloader to flash this.
i'm asking coz after i flash this my screen just black only but there is vibrate when i press the on off button
kris010976 said:
Dear googlesky,
Sorry for the stupid question.
did we need to unlock the bootloader to flash this.
i'm asking coz after i flash this my screen just black only but there is vibrate when i press the on off button
Click to expand...
Click to collapse
You need unlock the bootloader to flash this. Because Phantom kernel request that. Sorry for don't tell early. But I think every body known phantol kernel need Unlock bootloader.
phantom kernel version?
@googlesky, what was the version of phantom you used for your nandroid backup?
How make this:
Flash ST27i_6.2.A.1.100_1264_7472.tft by flashtool
Install Phantom kernel
Backup by Nandroid
Click to expand...
Click to collapse
Thanks!
Hi all,
I'm from Thailand.
I try to make flashable file for 4.4.2 kitkat kdz file for LG G2 ,It can use for LG G2 all model if you have kdz file.
I am testing with kdz file from http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW545195432109876543213/D80220A_00.kdz
( A6SFBK )
I reccommend 7zip for unzip/zip file.
Step by Step Guide
Before doing follower by instruction please read warning in red line before
1. Goto
http://forum.xda-developers.com/showthread.php?t=2600575
Download WindowsLGFirmwareExtract-ver.1.2.1.0 new version
2. Unzip WindowsLGFirmwareExtract-ver.1.2.1.0.zip and open WindowsLGFirmwareExtract.exe
3. At kdz/tot file select open and select 4.4.2 kdz that matching your G2 model (select all files extract)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Select extract kdz and waiting for success
5. At dz files select open and select .dz from step (4) (select all files extract)
6. Select extract dz and waiting for success
7. Select merge system-bin and waiting for success
8. Download
You must select one from 2 template
- KKROM_template.zip
https://mega.co.nz/#!kcVxSLaB!BJ4hHTF_3H8HR6EJTuak2hjiK1g1JosdKDfhcQ9Kr8g
(Stock firmware all partition include when you flash can not use custom recovery)
- KKROM_template_new.zip
https://mega.co.nz/#!BN1EFYRY!RJDpGwN4r3Q7q7lJmQil5RH_1s1lQWLHGZt21vY-Ffw
(New customize for still has custom recovery)
9. Unzip KKROM_template_new.zip/KKROM_template.zip
10. Copy system.img and all bin file as list below from WindowsLGFirmwareExtract-1.2.1.0-Release folder to KKROM_template_new/KKROM_template folder and use bat file in rename_droidth.zip rename all bin file
- KKROM_template_new.zip
KKROM_template_new folder must have
- KKROM_template.zip
KKROM_template folder must have
11. Zip all file in KKROM_template_new/KKROM_template. Now you get KKROM_template_new.zip/KKROM_template.zip ready to flash
12. Download
- Supersu from http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip (For all template)
- Patched Kernels and KitKat BaseBand from http://forum.xda-developers.com/showthread.php?t=2680948 (For KKROM_template_new)
Thank @Cloudyfa for work Patched Kernels and KitKat BaseBand
13. You must on 4.2.2 root+custom recovery (TWRP 2.6.3.3 or 2.7 That I am testing) .
Copy KKROM_template_new.zip/KKROM_template.zip to sdcard
Copy Patched Kernels,KitKat BaseBand to sdcard (For KKROM_template_new)
Copy UPDATE-SuperSU-v1.93.zip to sdcard to sdcard (For all template)
14. Reboot to recovery
15. Wipe
- Dalvik Cache
- System
- Data
- Cache
16 . Install
Warning :
When flash KKROM_template_new.zip finish.Do not Change or Flash Recovery on KK or JB (in case use backup/restore from Recovery or use Custom ROM)
if do not flash kdz before.Your G2 may be can not boot.
For KKROM_template_new
- KKROM_template_new.zip
- KitKat BaseBand
- Patched Kernels
- UPDATE-SuperSU-v1.93.zip
For KKROM_template
- KKROM_template.zip
- UPDATE-SuperSU-v1.93.zip
17 . Wipe cache/dalvik
18. Reboot
19. Enjoy
Guide for KKROM_template
Thank
@AndroidUser00110001
@Cloudyfa
@shriom_manerker
I have KK rooted. Thanks?
Do you still have a custom recovery after you class this?
**** Ripple said:
Do you still have a custom recovery after you class this?
Click to expand...
Click to collapse
์No.
OMG thank you very much
With this it's easier to make custom rom
Thanks awesome
is this for 16gb or 32gb or both?
Seem your file not yet finished uploading?
Both
Sent from my Nexus 7 using Tapatalk
kennytung said:
is this for 16gb or 32gb or both?
Seem your file not yet finished uploading?
Click to expand...
Click to collapse
Thank you. I edited link file.
hi..
thanks, this is exactly what i need.
one question though,
what about "cust.bin"?
someone said in other thread that it's needed to avoid bootloop.
farhanito said:
hi..
thanks, this is exactly what i need.
one question though,
what about "cust.bin"?
someone said in other thread that it's needed to avoid bootloop.
Click to expand...
Click to collapse
In this this:
http://forum.xda-developers.com/showthread.php?t=2665985
I got bootloop then I solve problem by add cust.bin in ROM.it's work for me.
Sent from my Nexus 7 using Tapatalk
somboons said:
In this this:
http://forum.xda-developers.com/showthread.php?t=2665985
I got bootloop then I solve problem by add cust.bin in ROM.it's work for me.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
so, you need to put cust.bin inside the zip, and add this line in updater-script
Code:
package_extract_file("cust.bin", "/dev/block/platform/msm_sdcc.1/by-name/cust");
am i right?
farhanito said:
so, you need to put cust.bin inside the zip, and add this line in updater-script
Code:
package_extract_file("cust.bin", "/dev/block/platform/msm_sdcc.1/by-name/cust");
am i right?
Click to expand...
Click to collapse
Yes.
Sent from my Nexus 7 using Tapatalk
farhanito said:
so, you need to put cust.bin inside the zip, and add this line in updater-script
Code:
package_extract_file("cust.bin", "/dev/block/platform/msm_sdcc.1/by-name/cust");
am i right?
Click to expand...
Click to collapse
Oh Thank,I will edit instruction .Wrong picture.
I'm already in KK
So i need to downgrade to JB first right?
Sent from my LG-D802 using xda app-developers app
GaYoung28 said:
I'm already in KK
So i need to downgrade to JB first right?
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
yes
@somboons thanks for the awesome tutorial just did it and its working just fine on my D802 cheers
This is awesome. It would be easier to flash back to stock this way then requiring a PC. Would this work for Verizon? I'd love a backup of the stock rom incase I'm t hours away from a PC and Verizon forces a bricking OTA update and leaves me completely lost and without a phone.
Sent from my VS980 4G using XDA Premium 4 mobile app
i got error lokiflyng and unsuportted aboot image file :\
help please
player911 said:
This is awesome. It would be easier to flash back to stock this way then requiring a PC. Would this work for Verizon? I'd love a backup of the stock rom incase I'm t hours away from a PC and Verizon forces a bricking OTA update and leaves me completely lost and without a phone.
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am not sure it's support Verizon but I think it should work too.
GaYoung28 said:
i got error lokiflyng and unsuportted aboot image file :\
help please
Click to expand...
Click to collapse
Can your G2 boot completely?
I did see this error on my device but At thread http://forum.xda-developers.com/showthread.php?t=2665985
@AndroidUser00110001 he told don't worry about error
If you get an error with flashing about loki then do not worry. ROM is ok and will boot. It just can't add loki to boot.img so it gives error but no big deal.
Click to expand...
Click to collapse
'm proud to present the first dual boot project for the Moto X ghost
This is currently fo testing and if it start working i will make this thread more cleaner and organized
About this Utility:
This mod can dual boot any no. of roms whether stocks or anything and is not so complex like Multirom with kexec patch.
How to test it :
ur device shoud be rooted to use
1. Download the latest snapshot release of Dual Boot Patcher from here and install it on your Moto x.
2. Install the apk
3. Open the apk go to ROMS and you will see your primary ROM, press the menu key and click “set kernel”.
Now you need to patch your CyanogenMod ROM and Gapps files to make them compatible with dual-booting.
In the Dual Boot Patcher app select “patch zip file” and choose “Ghost (Moto x)” from the drop down menu, now find the ROM in ur file explorer and press tap to begin patchingnow go to roms again and select pink button then add button then find ur patched file
it will be of name "romname_patched.zip"
after its loaded press tick icon
after that u will see 2 roms primary and secondary in roms section
where primary rom is wrotten press those 3 dots in right side of it and press set kernel
then the last step just press seconday rom
after then just reboot and u will in ur 2nd rom
test it and tell me if its working
Press thanks if i helped
Credits
especially @Chexialong for this utlity
more coming soon
I see it is in testing mod, i am gonna go home and give it a try
Thanks ....it can be stable as well as alpha
So plz teta and tell me
Anyone else interested in trying this
Well believe me this is better then multirom
Any particular requirements, other than root? For example, does the first ROM need to be stock, and secondary ROM must be CM/AOSP? Or can I have CM 12.1 first, stock second?
I'm currently running CM 12.1, but I can go back to my stock nandroid if I have to.
bobdamnit said:
Any particular requirements, other than root? For example, does the first ROM need to be stock, and secondary ROM must be CM/AOSP? Or can I have CM 12.1 first, stock second?
I'm currently running CM 12.1, but I can go back to my stock nandroid if I have to.
Click to expand...
Click to collapse
No need
Ur wish whether u want to keep first ROM cm or stock
Plz test it
So if there r problems I can get it fixed
If I would have the device I could have tested it myself first before posting
Thanks
@n8nn new dual boot for moto x
Cool. Downloading a new ROM to install as secondary now!
---------- Post added at 07:20 PM ---------- Previous post was at 06:59 PM ----------
Here it is installing Krypton 4.4.4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here it is finished installing:
Here it is as secondary:
Just a sec and I'll boot it and update this post with results.
Edit: no luck. I'm posting this on my iPad because my phone now only boots to recovery. Exactly what happened is as follows...
Select secondary ROM, reboot using normal hold power button, select reboot. Phone rebooted and displayed unlocked boot loader warning, screen went blank, unlocked bootloader warning came back, it went automatically into TWRP recovery.
Tried wiping Dalvik, caches, and rebooting. Same problem. Only boots to recovery. Now restoring my CM 12.1 nandroid.
i am using stock 5.1 as primary but when i select patch it shows failed to open archive for writing
Just tried it again. Same result.
Edit:
Be careful with this guys. After restoring my nandroid, I realized several oddities were happening. It definitely messes with partitions, and unless you are comfortable manually flashing your FXZ or using RSDlite, do NOT attempt this.
miju12 said:
i am using stock 5.1 as primary but when i select patch it shows failed to open archive for writing
Click to expand...
Click to collapse
Stock 5.1? This is for 2013 Moto X....
jonwgee said:
Stock 5.1? This is for 2013 Moto X....
Click to expand...
Click to collapse
yeah i know and i am using moto x 2013 build 222.21.7
Could it be because you're on 5.X, and you're trying to boot a 4.4.x? Have you tried the other way around, or both on the same version?
@Brawn_Sg
Got stuck in a bootloop had to use my back up I didn't patch play store for my secondary rom 5.0.2 that might be reason!!??
mac1996 said:
Got stuck in a bootloop had to use my back up I didn't patch play store for my secondary rom 5.0.2 that might be reason!!??
Click to expand...
Click to collapse
Looks like you're on Lollipop (or were) when you set kitkat as your primary, while running a separate ROM. That doesn't sound wise.
Or am I just looking at it wrong and you managed st swap OS's prior to having this issue?
someone managed to make the procedure successfully?
Snaipersky said:
Looks like you're on Lollipop (or were) when you set kitkat as your primary, while running a separate ROM. That doesn't sound wise.
Or am I just looking at it wrong and you managed st swap OS's prior to having this issue?
Click to expand...
Click to collapse
I have been using krypton ROM for almost a month .. I had the old cm12 5.0.2 in download folder , so I wanted to give it a try ..
It successfully patched both Roms with no issues after I selected secondary ROM and rebooted it got stuck on bootlogo
I did my 1 rom is epsilonproject-v3.1 set kernel
and than my 2º rom I modified Krypton-rom-Motox-v1.4.1-Unlocked
but when i select my 2 rom and restart, just enter in TWRP,
sorry my english
---------- Post added at 09:17 PM ---------- Previous post was at 08:38 PM ----------
what I need to choose in this option?
DangeloGH said:
I did my 1 rom is epsilonproject-v3.1 set kernel
and than my 2º rom I modified Krypton-rom-Motox-v1.4.1-Unlocked
but when i select my 2 rom and restart, just enter in TWRP,
sorry my english
---------- Post added at 09:17 PM ---------- Previous post was at 08:38 PM ----------
what I need to choose in this option?
Click to expand...
Click to collapse
Flash Krypton back on your phone and see if you are able to download anything at all. Or even update an app.
If not, be prepared to use RSDlite and use that to go back to stock.
bobdamnit said:
Flash Krypton back on your phone and see if you are able to download anything at all. Or even update an app.
If not, be prepared to use RSDlite and use that to go back to stock.
Click to expand...
Click to collapse
I just flash kernel and boot normaly...
but the dual boot doesnt work...
Hello,
Custom Recovery + Root
Wolfpapa said:
this is new: Nubia z9 全球首发中文TWRP recovery 以及root工具 时
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://bbs.nubia.cn/thread-501293-1-1.html
Download: http://pan.baidu.com/s/1ntoX6AX
Click to expand...
Click to collapse
Google Play
Wolfpapa said:
Works! Thanks!
BASIS: http://bbs.nubia.cn/thread-487610-1-1.html
1: ROOT :
http://bbs.nubia.cn/forum.php?mod=viewthread&tid=480787&extra=page=1&filter=typeid&typeid=379
2: Step by step BASIS
3: manually installed pack of gapps called : system\priv-app folder with rwxr-xr-x permissions.
4: Reboot
5: run Play Store (After it sets long to start: new reboot)
6: enjoy! ALL WORKS! (also contacts)
Click to expand...
Click to collapse
Custom ROM from Cuoco92
Cuoco92 said:
Here the 1.38
https://mega.nz/#!O4pHVZgB!Q4bqcygWox9GAZWfhiWviUX34OGnwXPfK7fXq5-RLd4
I've posted it on my Facebook site
https://m.facebook.com/cuoco92
Inviato dal mio NX505J utilizzando Tapatalk
Click to expand...
Click to collapse
Let me know what works for you. Just got mine today and have tried root genius and kingroot..no luck
Akuji52 said:
Hello,
i want to root the ZTE Nubia Z9 but nothing works. I tried Rootgenius, Kingoroot ...
Can someone help ?
Thank you
Click to expand...
Click to collapse
it worked today!
http://bbs.nubia.cn/thread-481008-1-1.html
Download:
http://pan.baidu.com/s/1c0k3O9E Password: mk24
Google apps:
http://www.coolapk.com/apk/org.coolapk.gmsinstaller?from=rss&version=1.0.0-beta4
UPDATE!
http://forum.xda-developers.com/showpost.php?p=61779046&postcount=86
Hi Wolfpapa,
thank you for your info.
I downloaded the files you write.
But now i can not read the chines letters. How did you make it, with the .exe file.
Can you please write it in english or german.
Thank you!
Grisu122122 said:
Hi Wolfpapa,
thank you for your info.
I downloaded the files you write.
But now i can not read the chines letters. How did you make it, with the .exe file.
Can you please write it in english or german.
Click to expand...
Click to collapse
the same as in (can it also work ...) :
http://forum.xda-developers.com/and...-nubia-z9-mini-one-click-root-custom-t3130631
Original " Z9和Z9MAX 是一个ROOT工具 " version:
It may be the exception to the non-English speaking TWRP VERSION...
Here is the solution to English translation:
http://forum.xda-developers.com/showthread.php?t=2373952
Unfortunately, I can test the next week. The phone will be next week delivery
please write about your experiences phone! Google apps ?
Thanks!
New FOTA UPDATE About SD!
Back up your data before moving to a new rom !
http://www.nubia.cn/service.php?sid=5
Download: Password : tira
http://pan.baidu.com/share/link?shareid=3545574096&uk=2436317143 (Jdownloader )
Update PDF manual:
http://pan.baidu.com/s/1c0wGeMc
first Steps!!!: UNROOT !!!
step Two: reading PDF :laugh:
i killed my stock recovery so i cant go to the recovery to update. It shows only a black screen.
Is there a way to flash the stock recovery or a custom recovery ?
I have root.
Thanks
Akuji52 said:
i killed my stock recovery so i cant go to the recovery to update. It shows only a black screen.
Is there a way to flash the stock recovery or a custom recovery ?
I have root.
Thanks
Click to expand...
Click to collapse
post #6 !!! - or.. :
1; download rom post #6
2; Unpacking with WinRAR or 7zip the stock recovery.img
3; fastboot mode ( enable USB Debugging mode )
4; Flashing recovery.img via adb
ok thanks, i will try it , when i am back from holiday
Wolfpapa said:
post #6 !!! - or.. :
1; download rom post #6
2; Unpacking with WinRAR or 7zip the stock recovery.img
3; fastboot mode ( enable USB Debugging mode )
4; Flashing recovery.img via adb
Click to expand...
Click to collapse
don't try this!!!!
i have flash the recovery.img file and now the phone doesn't start!!
i cant only start on boot to choise recovery or normal boot but don't work in all two options!!!
HELP ME!
NMarco said:
don't try this!!!!
i have flash the recovery.img file and now the phone doesn't start!!
i cant only start on boot to choise recovery or normal boot but don't work in all two options!!!
HELP ME!
Click to expand...
Click to collapse
How this happened?It describes the process?
why, how? etc.
I have used recovery.img into the upgrade file.
Flashed via adb and now the phone is hold on boot logo screen.
If I power on pressing vol - button I see screen to choose to boot in recovery or reboot system or power off.
All options doesn't work!
Do you have any ideas?
wow!!! Solved!
- I waited until the battery of my nubia z9 was completely to 0% .
- pressed vol down and connected to usb cable + charger (not pc!)
- wait 10 minutes for charge a little battery
- connect phone to pc and extracted recovery.img of the file zip upgrade
- via adb I have run this command: fastboot -i 0x19d2 flash recovery recovery.img
- selected reboot to recovery
- ALL OK! fortunately!!!
NMarco said:
wow!!! Solved!
- I waited until the battery of my nubia z9 was completely to 0% .
- pressed vol down and connected to usb cable + charger (not pc!)
- wait 10 minutes for charge a little battery
- connect phone to pc and extracted recovery.img of the file zip upgrade
- via adb I have run this command: fastboot -i 0x19d2 flash recovery recovery.img
- selected reboot to recovery
- ALL OK! fortunately!!!
Click to expand...
Click to collapse
cleverly solved! :good::good::good:
any ideas to install gapps without custom recovery?
ok! in this post I reply to me!!
I have manually installed pack of gapps called: gapps-lp-20141109-signed on system\priv-app folder with rwxr-xr-x permissions.
That's all!
All works but actually only contacts aren't not sync and I dont's see in sync page of my account.
How did you actually do it?? It's not clear to me, are you rooted? Otherwise how could you access "system\priv-app" folder?
Thanks...
Yes, device is rooted!
NMarco said:
Yes, device is rooted!
Click to expand...
Click to collapse
And can I ask the exact steps you took?
Thanks again...
---------- Post added at 09:45 PM ---------- Previous post was at 09:28 PM ----------
giacomofisico said:
And can I ask the exact steps you took?
Thanks again...
Click to expand...
Click to collapse
Getting specific, is it the boot.img that you find in the big .zip file that you have to boot up?
Something like:
adb reboot bootloader
fastboot -i 0x19d2 boot boot.img
...and then flash superSU (and possibly gapps)?
Hi All.
Got my device from Hong kong today, Live in Denmark so think i am the first user in Denmark of this device.
Man the screen are great
We are missing an forum for this device here on XDA, hope they create one for us soon, so we can setup guides on how to do this and that.
Ok could we create an process guide in this thread with links for updating, rooting and so on.
I really miss Google stuff on my device, Google Play, sync from google contacts, photos, calender and so on.
First i think i need to Root right?
When its done i need to install Google framework right?
Could soneone that has allready provide us with links, guides or mayby Youtube video on how to do it correct, i would kill myself if i Break the device on the first day.
Thanks peeps
I started a little Android Generic System Image installation Guide on my Github :
https://github.com/GBouerat/xiaomi_mi_pad_4
(work in progress)
https://github.com/GBouerat/xiaomi_mi_pad_4/tree/master/TWRP
Code:
fastboot oem device-infov
Is it really device-infov or is it typo.
P.Kosunen said:
https://github.com/GBouerat/xiaomi_mi_pad_4/tree/master/TWRP
Code:
fastboot oem device-infov
Is it really device-infov or is it typo.
Click to expand...
Click to collapse
It's a typo, thanks
Code:
fastboot oem device-info
Thank you very much, mate! Can we expect to see an official TWRP release as well as LineageOS 15.1?
PS: Does Android P GIS work well? Are there any known issues so far?
Please do include the build.prop tweaks mentioned here - those are quite necessary for the device to function as a tablet.
cRaZy-bisCuiT said:
PS: Does Android P GIS work well? Are there any known issues so far?
Click to expand...
Click to collapse
None of those P GSIs boot.
Anyone able to root using Magisk on v9.6.23 boot.img (http://en.miui.com/thread-3538488-1-1.html)? Magisk patched boot.img doesn't seems to boot for me and I have to revert to stock boot.img.
Edit: hah, never mind. I forgot to disable forceencrypt when i flashed the new stock kernel and it encrypted data. Had to wipe data and unencrypt to root again.
Magisk on GSI is incompatible with adb usb debug mode, no ?
GBouerat said:
Magisk on GSI is incompatible with adb usb debug mode, no ?
Click to expand...
Click to collapse
works fine for me
Hi
Could You please write with recovery version is this? There are 2 recovery versions as of 2018.7.13 and 2018.7.11 with description like bellow:
2018.7.13 update
1. Fix the problem of not recognizing the external memory card.
2. After brushing in twrp, the first time you enter twrp, it may restart once. This is normal. If you restart repeatedly, or you cannot decrypt the data, please give me feedback in time.
2018.7.11 update:
1. Update the attempt to repair the decrypted data, and expect whether the follow-up can reach the expected.
2. After brushing in twrp, the first time you enter twrp, it may restart once. This is normal. If you restart repeatedly, or you cannot decrypt the data, please give me feedback in time.
---------- Post added at 11:42 AM ---------- Previous post was at 11:12 AM ----------
I booted my pad with Your recovery and I can't see external SD card, so I expect that is the 2018.7.11 version. Am I right?
Hi again.
I found on another forum recovery that supports external sd-card. It's: recovery-TWRP-3.2.2-0713-MIPAD4-RuEn-Kirhe.img and it's working fine on my mi pad 4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bartekm01 said:
Hi again.
I found on another forum recovery that supports external sd-card. It's: recovery-TWRP-3.2.2-0713-MIPAD4-RuEn-Kirhe.img and it's working fine on my mi pad 4
Click to expand...
Click to collapse
Hallo
Where did you find this TWRP?
I found it on 4pda. Link to download
https://drive.google.com/file/d/1CaX9pkdBcOZFMlxwQdOC2TPeknQGJHNZ/view?usp=drivesdk
bartekm01 said:
I found it on 4pda. Link to download
https://drive.google.com/file/d/1CaX9pkdBcOZFMlxwQdOC2TPeknQGJHNZ/view?usp=drivesdk
Click to expand...
Click to collapse
Tanks!!
Encryption
bartekm01 said:
Hi
Could You please write with recovery version is this? There are 2 recovery versions as of 2018.7.13 and 2018.7.11 with description like bellow:
2018.7.13 update
1. Fix the problem of not recognizing the external memory card.
2. After brushing in twrp, the first time you enter twrp, it may restart once. This is normal. If you restart repeatedly, or you cannot decrypt the data, please give me feedback in time.
2018.7.11 update:
1. Update the attempt to repair the decrypted data, and expect whether the follow-up can reach the expected.
2. After brushing in twrp, the first time you enter twrp, it may restart once. This is normal. If you restart repeatedly, or you cannot decrypt the data, please give me feedback in time.
---------- Post added at 11:42 AM ---------- Previous post was at 11:12 AM ----------
I booted my pad with Your recovery and I can't see external SD card, so I expect that is the 2018.7.11 version. Am I right?
Click to expand...
Click to collapse
Hi,
Were you able to encrypt your Mi Pad after flashing the GSI?
jonklinger said:
Hi,
Were you able to encrypt your Mi Pad after flashing the GSI?
Click to expand...
Click to collapse
I didn't install gsi
Hi !
What's the difference between ab version and aonly version ?
EDIT: I flash today Android Pie GSI version.
After flashing GSI, you can found Open GAPPS unofficial here: https://builds.nezorfla.me/?dir=opengapps/pie/arm64
For no error 70, before flashing Open GAPPS, you must do that: Wipe -> Advanced Wipe -> Select System -> Repair or Change File System -> Resize File System -> Swipe to Resize
After, you can flash Open GAPPS, Magisk (for root) and Dm-Verity, and finally reboot
bartekm01 said:
I found it on 4pda. Link to download
https://drive.google.com/file/d/1CaX9pkdBcOZFMlxwQdOC2TPeknQGJHNZ/view?usp=drivesdk
Click to expand...
Click to collapse
Have you also flashed the misc file together with the TWRP? Or in this version there is no need?
snke said:
Have you also flashed the misc file together with the TWRP? Or in this version there is no need?
Click to expand...
Click to collapse
No only TWRP. I didn't flash misc - I think that misc changing region but I did not found any information about it.
---------- Post added at 04:56 AM ---------- Previous post was at 04:51 AM ----------
arkansis said:
Hi !
What's the difference between ab version and aonly version ?
EDIT: I flash today Android Pie GSI version.
After flashing GSI, you can found Open GAPPS unofficial here: https://builds.nezorfla.me/?dir=opengapps/pie/arm64
For no error 70, before flashing Open GAPPS, you must do that: Wipe -> Advanced Wipe -> Select System -> Repair or Change File System -> Resize File System -> Swipe to Resize
After, you can flash Open GAPPS, Magisk (for root) and Dm-Verity, and finally reboot
Click to expand...
Click to collapse
MiPad4 is only a partition. There is no b partition for seamless updates.
So far I didn't install any GSI but I've have installed China stable, developer and xiaomi.eu roms and I didn't have to resize system partitions. An ROMs are bigger maybe that's why You need to extend partitions but installation should end with error because of lack "b" partition
AICP 8.1 GSI works fine.
https://forum.xda-developers.com/project-treble/trebleenabled-device-development/8-1-0-t3839168
dzidexx said:
AICP 8.1 GSI works fine.
https://forum.xda-developers.com/project-treble/trebleenabled-device-development/8-1-0-t3839168
Click to expand...
Click to collapse
I'm agree, in my opinion It's the best GSI rom for MP4.