i have a LWW Unlocked bootloader
i want to flash a rom but im in a stock ICS .587 non-root stock kernel
All drivers are already installed (i think), when i open flashtool and connect my phone in fastboot mode (volume up) the blue led is turned on but it can't be recognized in the flashtool, in the log when i connect my device it says "device connected in flash mode"
help ! i need to flash a kernel
bump i need help
When I connect my LWW in fastboot mode, Flashtool on my home PC recognizes it as connected in flashmode. If I connect it in flashmode, it is recognized as flash mode, as it should, but again, fastboot is also recognized as flashmode. I tried to remove GGSEMC drivers, but no luck - when I connect phone in fastboot mode Windows recognizes it as S1 Boot Fastboot unknown device first, then suddenly it changes to SEMC Flash device and driver for flashmode is auto-installed.
What can I do? please help
try re-installing the sony driver. that should work.
Try reinstalling the drivers or install pc companion/sony update service, they should automatically install the drivers
done that already. but didn't work
Use 2.0USB ports, i was using USB3.0 ports and that was my problem.
1)download and reinstall drivers.
2) In settings->developer options-> enable Android USB debugging
Related
I cant connect my xperia mini to PC in any mode. windows displays 'device not recognized' error. though all my drivers including fastboot and ADB are set up perrfectly. Phone shows green and blue LED when connected in flashmode and fastboot mode but still nor recognized by windows. Device manager shows Error code: 43
please help.
Download flashtool, go to the installation folder -> drivers and install all drivers for all devices/modes. If this won't work install PC Companion or Sony Update Service, they should install the drivers automatically
Will Work!
mihahn said:
Download flashtool, go to the installation folder -> drivers and install all drivers for all devices/modes. If this won't work install PC Companion or Sony Update Service, they should install the drivers automatically
Click to expand...
Click to collapse
This method is VALID. Just install drivers from flash tool folder. It'll work! :laugh:
I already mentioned I had all drivers.
Turns out it was a USB cable problem. got a new USB. fixed.
Hello guys, I have another problem with this m4...
I cannot get into flashmode. Using Windows 7 with all drivers and using the original cable in a usb 2.0 When I connect the phone holding the button i see the green led lightning for a moment, then it turn off and again light up for a moment. After this, in pc I see "SOMC Flash Device" but the flashing not start with any version of FlashTool.
And then, with the stock rom (tried many versions) the phone sometimes freeze and reboot after 5-10 minutes.
How can I fix? I want to relock the bootloader and flash the original rom in tft format. But still no flashmode....
P.S. fastboot working fine.
I've been there also...
Flash this via fastboot-mode and then you should be able to connect via flashmode.
http://forum.xda-developers.com/m4-aqua/development/5-1-1-aosp-beta-team-t3193546
I don't know, is there another rom which can be install via fastbootmode...
Thanks, but not worked, still the same problem...
Reboot your PC. Sometimes it helps.
Still the problem.... Can be caused by unlocked bootloader?
No, I don't think so.
So you connect your phone on flashboot after when flashtool ask to do it?
Yes, but anytime I try to put device into flashmode, not work...
Ok, now the device freeze and reboot also in normal mode, without connect to pc. I tried to reconnect the battery and enter flashmode, but nothing work... Only fastboot, twrp and system with random reboots.....
What about flashmode driver do u install them
hello like the title said
i cant seem to enter flashmode. fastboot and recovery works fine tho
i was trying to install stock rom, xperia companion app and flashtool doesnt help
flashtool said something like usb debugging off, and 2011 devices bla bla (usb debugging IS NOT OFF its ON) tried 2 different version the 9.18 and 9.2
the green light did light up only like 1s then off then light up again then its gone for good
after that the phone connected to pc and recognized as somc flash device but not recognized by flashtool or xperia companion
first off all its not really a problem because i can still go to fastboot and recovery to flash ROM
but since i want to revert to stock rom (not modified,rooted or anything)
can someone guide me how to fix it? i tried 2 pc + a laptop, flashmode still not detected
Same problem
I'am with same a problema, u have a solution?
You have to wait for flashtool to ask you to connect your phone in flashmode and that is after you've loaded your firmware to flash
Your phone will only stay in flashmode (green led) whilst it is receiving data if it is not receiving data it will switch off after a few second's
Hello, trying to custom ROM my Z3CT. My bootloader should be unlockable (verified on sony webpage), but I am unable to connect tablet in fastboot mode. I have installed USB drivers via device manager, I have also downloaded platform tools. I turn on my device holding VOLUME UP+POWER and plug in USB cable. Device now shows in my PC devices as "S1 Service". It seems like there aren´t any drivers, so I tried to download USB drivers with android_winusb file. But it won´t update. When I run command "fastboot devices" nothing returns. How can I make my tablet talk to the PC? I am sure bootloader is unlockable.
Same situation here. Did you find any solutions?
pantelis20 said:
Same situation here. Did you find any solutions?
Click to expand...
Click to collapse
Same problem here too. I do get the blue LED light, but still no response.
I think you have got not all necessary drivers installed. One way to get them is installing Flashtool http://www.flashtool.net/
Boot Z3TC up and connect it via USB. Then start Flashtool. If ADB-connection is enabled in Z3TC developer settings, Flashtool will recognize your Z3TC.
Then start c:\flashtools\drivers\Flashtool-drivers.exe - this should have been downloaded meanwhile by flashtool. Before this, you should disconnect Z3TC.
Install all drivers Flashtool-drivers.exe will offer. You will need to disable UAC to do this. Driver will stay installed after reboot and enabled UAC again.
Then Z3TC will be recognized by fastboot.
tommes_d said:
I think you have got not all necessary drivers installed. One way to get them is installing Flashtool http://www.flashtool.net/
Boot Z3TC up and connect it via USB. Then start Flashtool. If ADB-connection is enabled in Z3TC developer settings, Flashtool will recognize your Z3TC.
Then start c:\flashtools\drivers\Flashtool-drivers.exe - this should have been downloaded meanwhile by flashtool. Before this, you should disconnect Z3TC.
Install all drivers Flashtool-drivers.exe will offer. You will need to disable UAC to do this. Driver will stay installed after reboot and enabled UAC again.
Then Z3TC will be recognized by fastboot.
Click to expand...
Click to collapse
Thanks for this step by step manual. I can follow the process for the first part. Volume down and start unlocking the bootloader, but then one needs to unplug the device and press volume up and from this point on nothing happens. Tried several times and sometimes after the red led the blue one lights up, but still the process doesn't continue. (Drivers are all installed)
Any suggestions?
Are you trying to unlock the bootloader with flashtool? Please describe what you are doing there...
I didn't turn on usb debugging on my infinix X559C and it's bricked. While trying to flash a new rom, my pc is not recognising my phone after download all the required drivers. I'm using sp flash tool.
What do i do?
usb debugging is useless on bricked phone anyway. you probably mixed up different modes. adb is not involved in rooting/flashing. you don't need usb debugging for fastboot.
SP Flash Tool neither uses adb nor fastboot mode, therefore these drivers aren't required.
when device connected in powered off state, preloader mode appears for only ~1 second - during this moment one must quickly pick up yellow triangle in windows device manager and manually assign VCOM preloader driver.
once preloader driver installed successfully, SP Flash tool will detect phone if you retain right order: 1) start flashing 2) connect phone
Beware: In any case never ever flash in "Format all + Download" mode!