I have used the tutorial for rooting my phone, it goes through the first stage on pda flashing an insecure rom, phone reboots and i have the yellow triangle, then the phone just locks on black screen, tried running the easy root software, it connects to the phone then stops.
I can enter recovery mode and tried a different kernal but still same problem, Thanks in advance for any help.
Jaycee
jayceemcg said:
I have used the tutorial for rooting my phone, it goes through the first stage on pda flashing an insecure rom, phone reboots and i have the yellow triangle, then the phone just locks on black screen, tried running the easy root software, it connects to the phone then stops.
I can enter recovery mode and tried a different kernal but still same problem, Thanks in advance for any help.
Jaycee
Click to expand...
Click to collapse
reflash stock via odin (get firmware at sammobile.com)
and... dont try to root it again, for sure u screwed up cuz u didnt read enough, i dunno
C4SCA said:
reflash stock via odin (get firmware at sammobile.com)
and... dont try to root it again, for sure u screwed up cuz u didnt read enough, i dunno
Click to expand...
Click to collapse
Couldnt see a flash file for uk s2 on there, but thanks for the info
jayceemcg said:
Couldnt see a flash file for uk s2 on there, but thanks for the info
Click to expand...
Click to collapse
there u go, jellybean; http://www.hotfile.com/dl/200899346/20a7989/I9100XWLSN_I9100OXXLS8_NEE.zip.html
thanks for the link, being a newbie do i use odin and just select pda again ?
jayceemcg said:
thanks for the link, being a newbie do i use odin and just select pda again ?
Click to expand...
Click to collapse
download, unzip the downloaded file until u get a tar.md5 file
got o recovery and wipe data/factory reset (and format system, preload, data and cache if on a custom recovery, check under mount and storage)
reboot to download mode, plug your phone
open odin, click pda, select the tar.md5 file, hit start and wait.
if the phone does boot after flashing, wait a minute, reboot to recovery, wipe data/factory reset and reboot (even if the device boots at first time, i advise u to do this wipe anyway)
back working again, couldnt get into the recovery mode, tried the up volume home and power, also searched and tried the up down power also, all i want to do is unlock my phone lol
jayceemcg said:
back working again, couldnt get into the recovery mode, tried the up volume home and power, also searched and tried the up down power also, all i want to do is unlock my phone lol
Click to expand...
Click to collapse
But now is the phone fixed or not?
Or are u still stuck trying to get into recovery mode?
Remove battery, and press vol up, home, and power. Release the power when samsung galaxy s2 appears but keep holding vol up and home
Sent from my Nexus 7 using xda app-developers app
phone is working, but want it unlocking....cannot access recovery mode, tried Remove battery, and press vol up, home, and power. Release the power when samsung galaxy s2 appears but keep holding vol up and home.
phone it's working fine and you can't get into recovery mode?
Keep trying that combo, do it while the device is off, press it till you get there.
And why the hell do you want to get into recovery in order to unlock the phone?
Sent from the little guy
the guy above recommended i go to recovery and delete all data, so thats what i was trying to do, he also helped get my phone back working, is it possible to unlock without rooting ?
Yes, by getting the unlock code from your carrier.
I suggest you read a couple of threads before you attempt rooting it.
Sent from the little guy
i bought the phone on my carrier from ebay, i have now changed carrier but like the phone.
Root it is.
Did you get into recovery yet?
Sent from the little guy
cant get into recovery mode, struggling now.. think i will just get rid and get a different phone.... been at it for hours with no joy.... thanks for all the help guys
http://forum.xda-developers.com/showthread.php?t=2219755
Follow that tutorial
AndroidPlant
An everyday user.
Related
hi guys... im gonna kill my self.. i tried wveruthing and my phone doest work.. one day my phone turn off and when i tried to turn on didnt start properly. Only show me samsung galaxy s2 then siyahkernel and thast all. it is very strange. So i tried to put in recovery mode but i cant. only in download mode but only when i connect the phone with the computer. Then i install many rom(stock, custom) succesfully but the phone is still the same like i never install any rom. So i went to SAT but i live in argentina and they couldnt help me... thats kind of funny.. they must repair the phone because is SAT .. but they didnt. so.. i dont know waht to do. should i try a jig ? i read somewhere that it could be that sd internal is broken? i hope u can help me
We need a lot more info. What did you flash, how did you flash it. Where did you get the firmware. I ask the last question because according to your profile, you just created this account today. Which tells me you got the firmware elsewhere.
Sent from my SGH-I777 using xda premium
lok1to said:
hi guys... im gonna kill my self.. i tried wveruthing and my phone doest work.. one day my phone turn off and when i tried to turn on didnt start properly. Only show me samsung galaxy s2 then siyahkernel and thast all. it is very strange. So i tried to put in recovery mode but i cant. only in download mode but only when i connect the phone with the computer. Then i install many rom(stock, custom) succesfully but the phone is still the same like i never install any rom. So i went to SAT but i live in argentina and they couldnt help me... thats kind of funny.. they must repair the phone because is SAT .. but they didnt. so.. i dont know waht to do. should i try a jig ? i read somewhere that it could be that sd internal is broken? i hope u can help me
Click to expand...
Click to collapse
How did you try to enter the Recovery mode?
What key combination?
well.. i download a stock rom in a post of this forum.. then i flash with odin.. pda and then i tried with pda and pit but nothing.. its like i didnt install it.
Recovery mode --> volume up + volume down + power button. when show me samsung galaxy i keep holding and in the second boot stay in that screen of samsung and when i connect in pc the second boot the screen is black and the touch key flick
lok1to said:
well.. i download a stock rom in a post of this forum.. then i flash with odin.. pda and then i tried with pda and pit but nothing.. its like i didnt install it.
Recovery mode --> volume up + volume down + power button. when show me samsung galaxy i keep holding and in the second boot stay in that screen of samsung and when i connect in pc the second boot the screen is black and the touch key flick
Click to expand...
Click to collapse
To boot into recovery you want to release the buttons by the second Samsung logo pop-up. And don't plug into computer. That's for download mode.
Regardless, I don't see recovery being much help to you if Odin is not working for you.
Is odin showing that its successfully flashing your phone? After flashing back to stock with Odin, is the siyah logo at least gone?
lok1to said:
hi guys... im gonna kill my self.. i tried wveruthing and my phone doest work.. one day my phone turn off and when i tried to turn on didnt start properly. Only show me samsung galaxy s2 then siyahkernel and thast all. it is very strange. So i tried to put in recovery mode but i cant. only in download mode but only when i connect the phone with the computer. Then i install many rom(stock, custom) succesfully but the phone is still the same like i never install any rom. So i went to SAT but i live in argentina and they couldnt help me... thats kind of funny.. they must repair the phone because is SAT .. but they didnt. so.. i dont know waht to do. should i try a jig ? i read somewhere that it could be that sd internal is broken? i hope u can help me
Click to expand...
Click to collapse
lok1to said:
well.. i download a stock rom in a post of this forum.. then i flash with odin.. pda and then i tried with pda and pit but nothing.. its like i didnt install it.
Recovery mode --> volume up + volume down + power button. when show me samsung galaxy i keep holding and in the second boot stay in that screen of samsung and when i connect in pc the second boot the screen is black and the touch key flick
Click to expand...
Click to collapse
Yes, but you need to describe everything you did and everything that happened to make you want to flash back to stock. Without knowing what caused the problem in the first place, we can't help you very much. You say you installed many roms (stock, custom). Your phone probably did not fail randomly. There is probably some event or circumstance you can think of, or change you made, just before it failed. Please be specific.
lok1to said:
well.. i download a stock rom in a post of this forum.. then i flash with odin.. pda and then i tried with pda and pit but nothing.. its like i didnt install it.
Recovery mode --> volume up + volume down + power button. when show me samsung galaxy i keep holding and in the second boot stay in that screen of samsung and when i connect in pc the second boot the screen is black and the touch key flick
Click to expand...
Click to collapse
Hold the Vol+/- & PWR button at the same time, when seeing first boot, keep holding all 3, when past 2nd boot screen, release all 3.
There's no PC involved.
welll the phone was perfectly when one day pum ! turn off and then i cant boot normally. So i try to put in recovery mode and i hold volume upvolume down+power and in the second boot when i see the samsung logo i release and nothing happend. and i see only the samsung galax logo bla bla.. when i turn on the phone normally i can see the samsung logo then de siyah kernel and stack there. if i wait some minutes its restart and do it again. I try to install with odin some stock rom and pass perfectly but the phone still show me the same. its like i didnt change anything. ahhhhhhhhhhhhhh i dont know if u understand me jajjaaj my english is not very good lol im gonna cry
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Chaos Residue said:
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Click to expand...
Click to collapse
Don't worry..i have done worse things with my phone and yet to brick it..
Fist thing to go into recovery you hold vol up + power + home and not vol down..
Second thing what you will have to do is after the Odin flash..press and hold vol up+power+home..you will boot into the stock recovery..from here do a factory reset but mind you all the data on your internal sdcard will be lost when you do this..now reboot your phone..your phone will boot up properly now..assuming that you have flashed the firmware properly in Odin..
Chaos Residue said:
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Click to expand...
Click to collapse
As zoot1 replied to you for download mode press vol down+home+power for a few seconds......for recovery vol up+home+power.........
And make very sure the kernel you flash is compatible with your phone and firmware!!!!!!!!!!!! The rest zoot1 explained in his reply
Good luck
Sorta Bricked
Anyone have an idea what I've done.... Black screen with blue light. I can get to the recovery menu, clockwork is installed, but I can't flash a rom. The only way to get the phone to stay off is by removing the battery.
This is a Cspire L710. I've attempted to flash a Cspire_nandroid_stock zip, the phone will find it but can't open it. I missed a step somewhere I guess. I had it in download mode but made the mistake of trying the factory reset-which changed that.
I've also tried a couple of other roms with the same results.
db1117 said:
Anyone have an idea what I've done.... Black screen with blue light. I can get to the recovery menu, clockwork is installed, but I can't flash a rom. The only way to get the phone to stay off is by removing the battery.
This is a Cspire L710. I've attempted to flash a Cspire_nandroid_stock zip, the phone will find it but can't open it. I missed a step somewhere I guess. I had it in download mode but made the mistake of trying the factory reset-which changed that.
I've also tried a couple of other roms with the same results.
Click to expand...
Click to collapse
go to download mode and flash a stock rom via odin
Cant's get to Download mode
Unless there is a way to get to download mode through the recovery menu, download mode is not an option.
db1117 said:
Unless there is a way to get to download mode through the recovery menu, download mode is not an option.
Click to expand...
Click to collapse
Well i suggest u send it with its warranty or u could check out my sig and build ur own usb jig
Sent from my GT-I9300 using xda premium
You might be able to get to download mode via a usb jig.
Hey,
I have a Samsung galaxy s3 GT-i9300 that wont boot up (it only shows the samsung logo).
Ive rebooted, removed the battery but no success. The only thing that works is download mode. It is still stock (not rooted).
I know theres some similar threads already however theyre rooted with custom roms. Any suggestions? What can I do?
Nath
ronin201085 said:
Hey,
I have a Samsung galaxy s3 GT-i9300 that wont boot up (it only shows the samsung logo).
Ive rebooted, removed the battery but no success. The only thing that works is download mode. It is still stock (not rooted).
I know theres some similar threads already however theyre rooted with custom roms. Any suggestions? What can I do?
Nath
Click to expand...
Click to collapse
You could try reflashing your firmware via Odin, you can download it from Sammobile quite easily
NewAussiefromCanada said:
You could try reflashing your firmware via Odin, you can download it from Sammobile quite easily
Click to expand...
Click to collapse
The only things stopping me is that the handset is still completely stock and under warranty. I dont want to try it and risk losing that warranty...
Try go into recovery and factory reset
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Try go into recovery and factory reset
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How can I get in to recovery? Power+VolDown+Home only put me in download mode with no other options.
Hi recovery is different. Power+home+vol up
Sent from my GT-I9300 using xda premium
madcable said:
Hi recovery is different. Power+home+vol up
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks, tried it, failed.
I turned teh phone off, held power+home+vol up until I saw the logo and then it didnt go any further.
ronin201085 said:
The only things stopping me is that the handset is still completely stock and under warranty. I dont want to try it and risk losing that warranty...
Click to expand...
Click to collapse
If you flash a official release from sammobile it should not increase your binary count, thus leaving your warranty intact. It is when you root or flash a custom Rom your binary will increase.
Worst case you need to use triangleaway if counter increases
Sent from my Jelly Omega SIII using XDA App
If anyone's interested, I had to return the phone under warranty where they replaced the main PBA.
The combination to get to recovery is this (for future reference)
Vol-up + home + power button. Once galaxy s 3 logo pops up quickly let go of the power button and hold in again then let all three go once in recovery.
Sent from my GT-I9300 using xda premium
please help meeeee
i did every thing..wipe my data ,factory rest it,wipe every thing but still my s3 is stuck on boot logo...i rooted it then i opend chainfire3d and updaate it ..after that all this happend..and i am also noob
jehanzaib1 said:
i did every thing..wipe my data ,factory rest it,wipe every thing but still my s3 is stuck on boot logo...i rooted it then i opend chainfire3d and updaate it ..after that all this happend..and i am also noob
Click to expand...
Click to collapse
I had a problem once where my phone wouldn't get past the Samsung boot logo all I did was remove the external SD card tried again and it worked! Try it?
Sent from my GT-I9300 using xda premium
jehanzaib1 said:
i did every thing..wipe my data ,factory rest it,wipe every thing but still my s3 is stuck on boot logo...i rooted it then i opend chainfire3d and updaate it ..after that all this happend..and i am also noob
Click to expand...
Click to collapse
It's forbidden here to spoon feed people but I think I'll help you since I've experienced that myself.
Check your inbox for my PM.
Help wanted also.
EtienneBordeaux said:
It's forbidden here to spoon feed people but I think I'll help you since I've experienced that myself.
Check your inbox for my PM.
Click to expand...
Click to collapse
PM me also?
You guy´s soft bricked your phones thats why u dont get any where re-flashing, but heres something worth trying without risking anything!!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
JUST GET YOUR SAMMY STOCK ROM FIRST FROM THEIR SITE
Use this Odin version >android.gs/download-odin-1-85/.
Above the country code and you can know the three-letter code which applies to your country. Now look for the date of release and select an appropriate update release for your phone.
Step-4 Rebooting
Reboot by holding Home, Volume Down and Power buttons. Remember you need to hold the Volume Down button and not the Volume Up button as in the first step. You will get into the download mode. So, you phone is now ready to get the firmware via USB.
The phone will flash a warning about the dangers involved. You should not worry as you are putting the firmware back on the phone.
On the computer, now unzip the Samsung firmware folder you downloaded from the official website. Now extract the .md5 file.
Now open Odin, select.md5 file in the 'PDA' section of Odin.
Make sure that Auto Reboot and F. Reset Time is ticked.
Connect your Galaxy S3 to your computer via the USB lead. Odin will automatically detect the phone and a pop-up message will show. Now start the process of transferring the file.
Step-5
Wait for the file to download. Odin will show 'PASS!' in the box once the transfer is successful. And the phone will then, reboot.
If it hangs on the Samsung logo, don't worry reboot into the recovery mode by holding down Home, Volume Up and Power buttons. Wipe the data/factory reset and reboot.
This will in all chances bring your phone to a functioning mode. Sign in and start working.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The extent of you phone being bricked may vary, but the symptoms are often the same -- a reboot loop, switching itself off after the Samsung logo or never getting into the operating system. As long as you can get into the recovery mode, there is hope to recover the Samsung Galaxy S3,
no success
Hi guys,
your solutions are great but in my case it didnt help at all.
My phone still stucks at logo. Only download mode is possible, but odin wanted a pit file always when i tried to download the sammy firmware rom. After all i even downloaded the pit file GT-I9300_mx_20120329.pit. But even with the pitfile and Re-Partitioning it didnt function at all.
My SGS3 T-Mobile can not start at all.
PLEASE HELP ME, i am helpless.
with best regards
ghostworm
spoonymoon said:
You guy´s soft bricked your phones thats why u dont get any where re-flashing, but heres something worth trying without risking anything!!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
JUST GET YOUR SAMMY STOCK ROM FIRST FROM THEIR SITE
Use this Odin version >android.gs/download-odin-1-85/.
Above the country code and you can know the three-letter code which applies to your country. Now look for the date of release and select an appropriate update release for your phone.
Step-4 Rebooting
Reboot by holding Home, Volume Down and Power buttons. Remember you need to hold the Volume Down button and not the Volume Up button as in the first step. You will get into the download mode. So, you phone is now ready to get the firmware via USB.
The phone will flash a warning about the dangers involved. You should not worry as you are putting the firmware back on the phone.
On the computer, now unzip the Samsung firmware folder you downloaded from the official website. Now extract the .md5 file.
Now open Odin, select.md5 file in the 'PDA' section of Odin.
Make sure that Auto Reboot and F. Reset Time is ticked.
Connect your Galaxy S3 to your computer via the USB lead. Odin will automatically detect the phone and a pop-up message will show. Now start the process of transferring the file.
Step-5
Wait for the file to download. Odin will show 'PASS!' in the box once the transfer is successful. And the phone will then, reboot.
If it hangs on the Samsung logo, don't worry reboot into the recovery mode by holding down Home, Volume Up and Power buttons. Wipe the data/factory reset and reboot.
This will in all chances bring your phone to a functioning mode. Sign in and start working.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The extent of you phone being bricked may vary, but the symptoms are often the same -- a reboot loop, switching itself off after the Samsung logo or never getting into the operating system. As long as you can get into the recovery mode, there is hope to recover the Samsung Galaxy S3,
Click to expand...
Click to collapse
ghostworm said:
Hi guys,
your solutions are great but in my case it didnt help at all.
My phone still stucks at logo. Only download mode is possible, but odin wanted a pit file always when i tried to download the sammy firmware rom. After all i even downloaded the pit file GT-I9300_mx_20120329.pit. But even with the pitfile and Re-Partitioning it didnt function at all.
My SGS3 T-Mobile can not start at all.
PLEASE HELP ME, i am helpless.
with best regards
ghostworm
Click to expand...
Click to collapse
___________________________________________________________________________
If you using Jelly bean then Chainfire 3D not compatible you will need to wipe and reflash
bunglebp said:
___________________________________________________________________________
If you using Jelly bean then Chainfire 3D not compatible you will need to wipe and reflash
Click to expand...
Click to collapse
i am not able to get into the wipe mode of the phone with 3 finger button mode, only download mode is available.
is there a special procedure how to wipe and reflash with odin or any software?
If there is a tutorial link it would be great to send it to me.
Many thanks in advance.
ghostworm
ghostworm said:
i am not able to get into the wipe mode of the phone with 3 finger button mode, only download mode is available.
is there a special procedure how to wipe and reflash with odin or any software?
If there is a tutorial link it would be great to send it to me.
Many thanks in advance.
ghostworm
Click to expand...
Click to collapse
_________________________________________________________________
This is worth a try - ROM Flash using ODIN and Download Mode: http://forum.xda-developers.com/showthread.php?t=1835931
bunglebp said:
_________________________________________________________________
This is worth a try - ROM Flash using ODIN and Download Mode: http://forum.xda-developers.com/showthread.php?t=1835931
Click to expand...
Click to collapse
i will try it out. First i have to download 859MB !!!
I will tell you if it was successfull.
Thank you very much
hi, im new here, the problem i have is this: i have a galaxy s2 i777, i had the issue that whenever i restarted my phone it would go into recovery mode, that was after i tried to put cyanogenmod 10 in it, before that, my power button stopped working after trying to root with framaroot and choosing supersu and restarted, so i had to flash because i couldnt choose an option on recovery mode with my power button not working and i did, and flashed to 4.1.2, then i tried to root again with framaroot but this time superuser, and when i restarted the phone it got stuck on samsung, so i tried to flash it again but now im getting stuck on factoryfs.img with odin, ive tried with 3 different roms, ICS 4.0.3, 4.0.4 and JellyBean 4.1.2, but always the same, also, when i restart now i get the message "firmware upgrade encountered an issue. please select recovery mode on kies".
havent found any solution in no forum wich is why im postin this here, its an emergency, im without a phone right now because of this!!
i hope you can help me!! Thanks.
US variants have their own fora, your thread belongs here. I've asked mods to move it for you, sit tight until they do.
MistahBungle said:
US variants have their own fora, your thread belongs here. I've asked mods to move it for you, sit tight until they do.
Click to expand...
Click to collapse
ohh, sorry i was looking for this model before posting but only saw i9100, thanks anyways.
juanf9224 said:
hi, im new here, the problem i have is this: i have a galaxy s2 i777, i had the issue that whenever i restarted my phone it would go into recovery mode, that was after i tried to put cyanogenmod 10 in it, before that, my power button stopped working after trying to root with framaroot and choosing supersu and restarted, so i had to flash because i couldnt choose an option on recovery mode with my power button not working and i did, and flashed to 4.1.2, then i tried to root again with framaroot but this time superuser, and when i restarted the phone it got stuck on samsung, so i tried to flash it again but now im getting stuck on factoryfs.img with odin, ive tried with 3 different roms, ICS 4.0.3, 4.0.4 and JellyBean 4.1.2, but always the same, also, when i restart now i get the message "firmware upgrade encountered an issue. please select recovery mode on kies".
havent found any solution in no forum wich is why im postin this here, its an emergency, im without a phone right now because of this!!
i hope you can help me!! Thanks.
Click to expand...
Click to collapse
You need to perform a wipe data/factory reset from within recovery. Since you have a bad power button, and cannot select that in stock recovery, you either need to get a touch recovery onto the phone, or you need to get the power button replaced. I'm not aware of a touch recovery that is in tar format that you can flash with Odin, but maybe someone else knows. Also, the recovery will need to match the system so that the phone will boot. Since you have flashed stock 4.1.2 but subsequent attempts to flash did not complete, you probably still have stock 4.1.2 on the phone. If so, that would require AJK v4.9 NoSwap, but again, I'm not aware of a tar version of that kernel.
Sorry I can't be of more help.
With regard to your other thread, there is a UCKH7 pit file in the Download Repository, but no one has posted a pit from UCMD8. I would expect that they are the same, though, since these phones never get repartitioned when upgraded. However, I doubt that will help your situation. What you need to do is perform a wipe data/factory reset.
creepyncrawly said:
You need to perform a wipe data/factory reset from within recovery. Since you have a bad power button, and cannot select that in stock recovery, you either need to get a touch recovery onto the phone, or you need to get the power button replaced. I'm not aware of a touch recovery that is in tar format that you can flash with Odin, but maybe someone else knows. Also, the recovery will need to match the system so that the phone will boot. Since you have flashed stock 4.1.2 but subsequent attempts to flash did not complete, you probably still have stock 4.1.2 on the phone. If so, that would require AJK v4.9 NoSwap, but again, I'm not aware of a tar version of that kernel.
Sorry I can't be of more help.
With regard to your other thread, there is a UCKH7 pit file in the Download Repository, but no one has posted a pit from UCMD8. I would expect that they are the same, though, since these phones never get repartitioned when upgraded. However, I doubt that will help your situation. What you need to do is perform a wipe data/factory reset.
Click to expand...
Click to collapse
hey, thanx for your answer, i finally flahed it with odin to 4.1.2 but it wont recognize the sim card, also, the phone wont boot when i put the battery on, maybe the function got damaged by restarting so much using the battery, and with the power button not working, how will i power it on,! lol a problem after another x_X
juanf9224 said:
hey, thanx for your answer, i finally flahed it with odin to 4.1.2 but it wont recognize the sim card, also, the phone wont boot when i put the battery on, maybe the function got damaged by restarting so much using the battery, and with the power button not working, how will i power it on,! lol a problem after another x_X
Click to expand...
Click to collapse
If you can solder and are handy at such things, you can get the replacement button for about $10 or $15. Or you can send it out to a repair service for usually about $40 to $50.
While you have a faulty power button:
To turn the phone on, hold down vol+ and vol- and plug in the usb cable, as if you were starting download mode. When you get to the warning screen, remove the cable and press the vol- button to cancel. The phone will boot into system.
There are multiple apps in the play store that turn the screen on and off. A good one is Gravity Screen - On/Off.
creepyncrawly said:
If you can solder and are handy at such things, you can get the replacement button for about $10 or $15. Or you can send it out to a repair service for usually about $40 to $50.
While you have a faulty power button:
To turn the phone on, hold down vol+ and vol- and plug in the usb cable, as if you were starting download mode. When you get to the warning screen, remove the cable and press the vol- button to cancel. The phone will boot into system.
There are multiple apps in the play store that turn the screen on and off. A good one is Gravity Screen - On/Off.
Click to expand...
Click to collapse
ill try with that app, thanks! and about the sim, i checked and i have no imei now nor baseband, theyre both unknown, any idea about it? how can i recover it?
Hi guys.
Last night i was trying to help a mate root and flash a rom on his 7500, and for some reason booting into recovery/download mode seems impossible.
Tried every button combo, unless it's not the power button alone nothing happens.
Tried using adb to reboot into recovery and the bootloader, but all it did was turn the device off.
Has anyone ever encountered something like this?
psychuil said:
Hi guys.
Last night i was trying to help a mate root and flash a rom on his 7500, and for some reason booting into recovery/download mode seems impossible.
Tried every button combo, unless it's not the power button alone nothing happens.
Tried using adb to reboot into recovery and the bootloader, but all it did was turn the device off.
Has anyone ever encountered something like this?
Click to expand...
Click to collapse
i would just odin a new recovery on it. That way u know u have a working recovery to boot to. Dont forget to check the md5 of the recovery zip before u flash it.
Could you point me to an odin guide? This would be the first time i play around with a samsung device.
Plus all the ones i managed to find with my google-fu seem to have the required files missing, due to their age
psychuil said:
Could you point me to an odin guide? This would be the first time i play around with a samsung device.
Plus all the ones i managed to find with my google-fu seem to have the required files missing, due to their age
Click to expand...
Click to collapse
Here is a Link to my Q&A thread. It has odin and an older cwm recovery tar that will work for the 7500...even though i say in the thread,7510 only.
Just use the odin in the zip and the recovery..not sure if the root zip will work. After u have the recovery on and boot the tab up. Go get new verion of twrp recovery for the 7500 and flash via recovery. When you reboot,it will ask to install root. Go ahead and let it.
Wait, but how am i to use odin if i can't reach download mode?
psychuil said:
Wait, but how am i to use odin if i can't reach download mode?
Click to expand...
Click to collapse
sorry..i mis read that. i thought u had download mode.
are u holding power button and volume down until the samsung logo appears. sometimes i have to keep holding it until the bootloader screen pops up..other times i have to release the power button. not sure why.
Check out my first post again.
psychuil said:
Check out my first post again.
Click to expand...
Click to collapse
Try running the battery all the way dead and leave it for a day or two..then charge it all the way up and try again.