[SOLVED!] Any way to bypass HTC setup screen? Stuck on HTC logo all white. - HTC One X+

Hello everyone!
I'm having some trouble right now, My phone was updated with the AT&T update because my phone prompted me about the update. I updated my phone and successfully updated the phone. I installed all of my backup apps from Titanium back, but when I restarted my phone after the apps were installed my phone booted up but said that NFC stopped working dailer stopped working,basically everything was not working - i couldnt even do anything with the phone. What I did was I tried doing a factory reset via TWRP but it didn't work. I also cleared the Dalvik and Cache but didnt work either.
I locked my bootloader and thought I would flash the RUU for my device. everything went fine untill the RUU displayed an "unknown bootloader version". I tried downloading the RUU again but it didnt seem to work.
I installed Elegancia through ADB install went through perfectly untill I reboot into the phone the HTC screen with the white background does not go anywhere. I occasionally get a pop up that says "stopped responding would you like to stop the program". I downloaded the Mongoose custom rom for my phone, again install went fine no problems. but once again when I boot into the phone I still get stuck on the HTC white background. This time the phone has a black screen with the status bar with the icons of the battery time and an x on the signal icon then the phone restarts.
What is going on with my phone? How can I reinstall an OS and get my phone working again?
any help would be greatly appreciated!

Since you have done the update, you will have to flash the ROM of this thread, everything you need to know is in this post.

Lucky Thirteen said:
Since you have done the update, you will have to flash the ROM of this thread, everything you need to know is in this post.
Click to expand...
Click to collapse
Thank you so much it worked perfectly!!
Any reason why the other ROMS didn't work?

Glad it work!
Please edit your OP title and write : [Solved] Any way to bypass HTC setup screen? Stuck on HTC logo all white.

Related

[Q] Partian problem?

I have been trying to add a rom to my lg optimus-t for pretty much the whole afternoon. I rooted it fine but when I tried to install AmunRa to make a recovery but that failed that was ok though since the ROM I ended up choosing asked for a different recovery system. The ROM I chose to use ciaox's openoptimus build
So I installed ROM Manager and did a recovery with clockwork mod, everything seemed fine until I loaded the clockworkMod and got E: bad boot message "recovery" I decided to continue anyways and followed the steps and when I finished part one it actually booted up, but I was unable to see any icons. All I was able to see was the lock screen and the network manager bar at the top.
There is a second part so I thought maybe if I went through all of the steps it would fix itself. It was all going great until I got to phase 2 #16 because it just wouldn't do it and the error message I got was "you cannot program the qcsbl header without the partition". in my infinite wisdom (dun dun dun) I decided to re-install everything, went to the recovery file and nothing happened, said it didn't exist. I had the rom so I decided to wipe the phone again and re-install it, now it doesn't even load and I realized I should have stopped to re-install somethings in the beginning.
Thankfully the clockworkMod recovery still boots and I have all functionality there(Well except for the recovery), so is there anyway for me to get 2.2 and install that into my phone to start all over again? A quick answer would be awesome, sorry for the novel, TIA.
Edit: got the rom up and running again, but I am back at the :"The Application settings (process com.android.settings) has stopped unexpectedly. Please try again" stage where I get the full unlock screen and the top bar that work, the emergency dialer still works as well. I tried doing phase2 again and following the instructions, but the phone goes into emergency mode and shuts off. At this point I'm thinking of trying another more simple ROM where I dont have to change the basebands, does that sound like a good idea?

[Q] In a huge pickle

I accidentally factory restored my phone this morning. But that is not the pickle. At the end of the initial account setup, the phone force closes the setup. And after that I don't see anything on the screen except for the notification bar. I can work with the notification bar that is switch on/off GPS, data, etc. But rest of the screen is black. Since the screen is black, Cant access any setting and toggle USB debugging to use KDZ. Can get calls and use the settings that come up there. But I guess that's about it. I think this is happening cause the option to setup Google account don't come up during initial setup. What can I do? Any ideas other than going to the service center?
did you had a custom rom installed
samrox144 said:
did you had a custom rom installed
Click to expand...
Click to collapse
No it was factory restored. Stock ROM. NO recovery.
try hard reset again and wait till it boots
ccdreadcc said:
try hard reset again and wait till it boots
Click to expand...
Click to collapse
Tried it all many times. there seems to be some bug in the new update, or something.
try this to install custom recovery : http://forum.xda-developers.com/showthread.php?t=1318750
If you wer on 2.3.3 previously follow
to install 2.3.3. stockrom follow : http://forum.xda-developers.com/showthread.php?t=1309744
Well thanx every one. I used KDZ and flashed the froyo rom. Its working now. Thanx again.

Nokia reboot problem when trying to update

Hello!
I have a strange problem with my phone it wont update to latset firmware without get in some kind of boot loop.
The phone was runing the lastest firmware 1232.5962.1314.0017 before the problems started, it all started when some systems apps like camera, settnings, messeging. etc, stop working. All that showed up when entering the apps was a black screen say something like "reconnecting" and then it jumped back to home screen.
So I restarted the phone but then went in som kind of reboot loop where it wouldent go past the nokia logo. I tried everything soft reset, hard reset. The last thing I tried was to reflash the phone, I tried diffrent ROMs and it finaly worked with the ROM 059Q5C6 RM-821 GLOBAL BLACK SWAP.
The phone is runing now and almost all functions work exept camera and automatic brightness (all that I discoverd so far).
Its currently running the 1231.5951.1249.1004 firmware.
But like I said now when I try the update the phone it goes to the same boot loop state.
What should i try next?
Is the thread in the right place?
Strepsil said:
Hello!
I have a strange problem with my phone it wont update to latset firmware without get in some kind of boot loop.
The phone was runing the lastest firmware 1232.5962.1314.0017 before the problems started, it all started when some systems apps like camera, settnings, messeging. etc, stop working. All that showed up when entering the apps was a black screen say something like "reconnecting" and then it jumped back to home screen.
So I restarted the phone but then went in som kind of reboot loop where it wouldent go past the nokia logo. I tried everything soft reset, hard reset. The last thing I tried was to reflash the phone, I tried diffrent ROMs and it finaly worked with the ROM 059Q5C6 RM-821 GLOBAL BLACK SWAP.
The phone is runing now and almost all functions work exept camera and automatic brightness (all that I discoverd so far).
Its currently running the 1231.5951.1249.1004 firmware.
But like I said now when I try the update the phone it goes to the same boot loop state.
What should i try next?
Is the thread in the right place?
Click to expand...
Click to collapse
Same thing happens to my phone!! Did not think that it could be the latest firmware (1308 for me) could have caused it since I don't think there are a lot of us affected by it and my phone has been running fine for months after the update! I've restored 5 times, by the time I thought to flash it, it wouldn't charge anymore.... I'd sent mine for repair now... Have you fixed yours?

HTC One SV for BOOST missing camera:'(

Hello. I decided to start a new thread. I have a Moonshine s-off phone. Recently I reset the phone put stock recovery on it and ran the newest RUU. It worked I got the new software[emoji3] . Then I unlocked the phone using the HTCDev method and my old unlock key, everything worked, when I went into BOOTLOADER phone said TAMPERED UNLOCKED S-OFF.
The only thing missing is my camera. Sometimes it turns on, but very rarely ( maybe 1/200 tries ). It tells me Unable To Start The Camera.
I think it's a software glitch, as with previous version of Android I had no issues. Also with the new OS the flash is BUSY sometimes. When I want to use a flashlight phone tells me PHONE SCREEN WILL BE USED FOR ILLUMINATION SINCE THE FLASH IS IN USE BY OTHER APP. There is no other app running...
I tried flashing TWRP but fastboot just hangs, I left it on for 3 hours and it never finished. I tried using the SD IMG method. It goes thru, tells me to reboot. When I do I'm on the same stock recovery...
I have backups of my phone. But they are all done with TWRP and I can't install it. I tried CWM as well, same result, timeout.
I might try running a lower version RUU and see if that fixes all...
[emoji27] [emoji23] [emoji24]
I have found a temp solution. If I disable my Phone Data and Location for a few minutes, then enable just the Phone Data camera will start. I don't know the time you need to wait... 2-5 minutes. I tried just putting the phone in Airplane mode but that did not make my camera. App start...
My Flash started working again. I have updated all my Apps, maybe that helped...

Galaxy s7 (G930A) At&T Root problem

Hi, I rooted my galaxy s7 from att using this method, https://www.youtube.com/watch?v=GNInTlCpv8E
It worked perfectly and I had my new rooted phone! So a couple of days after the root one of my apps stop working and I cannot get it to start working, it was a pushup workout app, so I restart my phone and it gets into a boot loop stuck on the at&t logo. I was very sad as I did not back anything up so I wiped my phone using the recovery boot and signed in and re-flashed the root rom through odin and re-installed supersu and it worked perfectly again. The next day I have the same problem but this time with snapchat and instagram so I knew what was going to happen and I restarted and it did the same thing. This time when I went into recovery boot I noticed "dm-verity verification failed" in red at the bottom. As of now I am just going to do what I did last time and wipe and re-flash as I made a backup this time and just restore my phone and hope it doesn't happen again. If someone could please explain why this is happening and maybe help me fix it I would be so happy thank you!
UPDATE 7/26/16: I re flashed the ap root file with odin without doing a factory reset and it is still stuck in a boot loop, meaning I have to do a factory reset to get it out.
Mine is doing same thing. I used chain fires root. Everything went perfect. Then couple days later apps started saying they had stopped and phone started freezing. Every app I tired to open would say they had stopped. Then it constantly kept saying Google play services had stopped. I tried to reboot and stuck into bootloop everytime. Rooted again same thing happened again. U ever find a fix or anyone no how to fix this

Categories

Resources