I'm running stock JB with siyah kernel on my SGS3 GT-I9300. I wanted to try out a rom from CyanogenMod but when I was flashing it through CWM, my phone froze!! Now, it's not powering on. It's not going to download mode or recovery mode. I'm scared now. I flashed the right file, I know that. But somehow, it didn't work. Any ideas?
Also, I wanna know, that if I take it to Samsung Care, will they be able to make out that my phone was rooted before? Because device status was modified & flash counter was around 12 before I hard-bricked (atleast that's what I think) my phone.
Please help me out.
P.S. I'm new here. So, move my thread to any category which you think is suitable for it. I thought it should be in this category, so I posted here.
saurabh_goyal93 said:
I'm running stock JB with siyah kernel on my SGS3 GT-I9300. I wanted to try out a rom from CyanogenMod but when I was flashing it through CWM, my phone froze!! Now, it's not powering on. It's not going to download mode or recovery mode. I'm scared now. I flashed the right file, I know that. But somehow, it didn't work. Any ideas?
Also, I wanna know, that if I take it to Samsung Care, will they be able to make out that my phone was rooted before? Because device status was modified & flash counter was around 12 before I hard-bricked (atleast that's what I think) my phone.
Please help me out.
P.S. I'm new here. So, move my thread to any category which you think is suitable for it. I thought it should be in this category, so I posted here.
Click to expand...
Click to collapse
That`s weird, did it just froze during the flashing? I can`t imagine how that could hardbrick your phone since Cyanogenmod doesn`t touch the bootloader. At least download mode should work. BTW what version of Siyah Kernel did you use?
Yeah if you can`t even access download mode then there is probably nothing you can do. You can try a USB Jig but if that`s not working too then take it to a Samsung Service Center and play dumb. Say the phone just wouldn`t come on. And if they can`t access download mode then I highly doubt that they can see if your phone is rooted.
Thanks a lot
Scarface1991 said:
That`s weird, did it just froze during the flashing? I can`t imagine how that could hardbrick your phone since Cyanogenmod doesn`t touch the bootloader. At least download mode should work. BTW what version of Siyah Kernel did you use?
Yeah if you can`t even access download mode then there is probably nothing you can do. You can try a USB Jig but if that`s not working too then take it to a Samsung Service Center and play dumb. Say the phone just wouldn`t come on. And if they can`t access download mode then I highly doubt that they can see if your phone is rooted.
Click to expand...
Click to collapse
Thanks a lot for your answer. I'm an experienced flasher and I flash roms on daily basis that's why I'm also very shocked at this.
I have a USB jig from the days when I used to have Samsung Galaxy S2, but it's not working with my S3.
Anyways,I'll take my phone to Samsung Care only I guess. :crying:
P.S. Even after changing the motherboard or something, they won't know? Cuz otherwise I'm out 40000 rupees!! (I live in India)
EDIT: I was using Siyah kernel v1.8.9.
If Samsung get it to boot then its no warranty but probable that they will put it down to SDS and just change the motherboard .
jje
saurabh_goyal93 said:
Thanks a lot for your answer. I'm an experienced flasher and I flash roms on daily basis that's why I'm also very shocked at this.
I have a USB jig from the days when I used to have Samsung Galaxy S2, but it's not working with my S3.
Anyways,I'll take my phone to Samsung Care only I guess. :crying:
P.S. Even after changing the motherboard or something, they won't know? Cuz otherwise I'm out 40000 rupees!! (I live in India)
EDIT: I was using Siyah kernel v1.8.9.
Click to expand...
Click to collapse
Ok that`s really weird. I suppose it`s just some hardware failure then. Of course that it happened while you flashed a ROM is very unfortunate.
If they change the whole mainboard then all information that was on the old mainboard will be gone. There is no way after they change the mainboard that they will see if you were rooted or not.
Related
heya all!
i just got my GT-I9100 today; it was bought from A1 (part of vodafone) austria, but it does not have a simlock, they usually "lag behind" with those and business customers seem to be able to get some of the first models that do not have any lock yet.
but thats not the issue; i fiddled around with a few things, namely: root it with that superoneclick thingie, install rom manager, (unsuccessfully) try to flash clockworkmod recovery with it, ..
and then i realized that it does not actually replace the "android system recovery 3e" at all, for some reason. actually i seemed to have both the 2e and the 3e version available SOMEwhere, when i did an "adb reboot recovery" i got into the 3e version, with some key combo i managed to get into 2e (i think it was vol-down + power)
in any case, after searching forums for a while i found info that people have been installing "darky's 9.2 resurrection" in this case because it kind of completely wipes everything and gives a clean base to start with.
so i tried that, and i think it was a bad idea to actually re-partition with odin with the included PIT file. in any case, the flashing process completely halted right after it started; after many minutes i unplugged the phone, odin immediately gave me a red FAIL label, and since the phone didn't react anymore i power cycled it via its battery. i guess that was the second mistake
now i'm stuck in a state of complete darkness. the appearently common issue of "black screen after logo" is something different, i don't get ANY reaction from the phone WHATSOEVER. regardless of what keys i press in what combinations etc, it acts as if the battery was completely empty (which it definitely is not). USB does not do anything either.
i also noticed that the phone got unusually warm in the area of the camera, not like HOT, but warmer than i was able to get it by just toying around with it the hour before. i mean, if i try to turn it on and stuff, so it looks to me as if it is doing something, but it cannot even initialize the display or usb.
i ordered some components and will try this method http://forum.xda-developers.com/showthread.php?t=819551 even tho it explicitly states that it won't help against all-blackness, just in case.
anyone got any ideas of what i could still do? or is trying to get a replacement from the carrier my only option?
just for additional info, i also have 2 HTC desires, and never managed to brick them to death, i have some clues about adb and the sdk in general, i'm not completely clueless when it comes to android, but since i don't even get any kind of touchable interface (usb wise) i'm out of ideas...
thanks & regards
hi mate darkys rom is for the samsung galaxy s not the gaxy s 2 and clockwork mod wont work either
andypull15 said:
hi mate darkys rom is for the samsung galaxy s not the gaxy s 2 and clockwork mod wont work either
Click to expand...
Click to collapse
hmn i kind of wasn't sure about darkys rom after my attempts anymore
in the beginning i thought the galaxy s2 was actually called i9000, until i opened it once again and say that it states 9100
but in any case - is there anything i can do, software wise?
anyone got any ideas of what i could still do? or is trying to get a replacement from the carrier my only option?
Fake /wrong rom they may reject it under warranty .
http://forum.xda-developers.com/showthread.php?t=1075278
Try flash a stock rom .
jje
JJEgan said:
anyone got any ideas of what i could still do? or is trying to get a replacement from the carrier my only option?
Fake /wrong rom they may reject it under warranty .
http://forum.xda-developers.com/showthread.php?t=1075278
Try flash a stock rom .
jje
Click to expand...
Click to collapse
well thats the problem, i can't flash anything. i have no way of going into download mode, or any other mode, its just "dead".
Try to use the "magical cable", i think this cable work also on SG2 and not only the SG1 ... There is a lot sellers on ebay.
Sorry did i not mention the download mode recovery jig .
If it boots via the recovery jig to download mode you may be able to fix or at least fix enough to claim warranty .
jje
yep i guess i will get the components on monday (and i need to borrow a soldering iron
i already got info from the carrier that they will replace it, i just hope they won't look at it too much
can tyou tell us if tyou succeded ? I'm in the exact same situation.
makrook said:
can tyou tell us if tyou succeded ? I'm in the exact same situation.
Click to expand...
Click to collapse
heys, i got a replacement from the carrier for free, and i'm not gonna brick it just to retest *g*
i ordered components for the usb rig and they already arrived, but i have not yet found time to test it, partly because i don't really need it - this time i did not make the mistake of flashing a wrong partition table......
regards
additional info: i'm on cognition S2 now. before i went there, i flashed 3-part stock 2.3.4 firmware, and this time, it was the right PIT file *g* so everything worked like a charm.
So I had previously rooted my SGSII, and decided to try installing CM7 on it. I used CWM Recovery and ran it off the SD card, and everything appeared to work fine. I think I had a bad/not fully functioning CWM or something, as it didn't list an option to backup anything (I'm guessing because I flashed the stock kernel after rooting?) Anyway, it will no longer boot. I can access download mode, but Odin fails everytime I try to flash anything back on there. When I try to boot my phone, I just get a "Firmware upgrade encountered an issue" error.
EDIT: I just tried again as I was writing this, after rebooting, reinstalling my drivers and rebooting my computer. I was able to get the Firmware to flash properly in Odin. Now I have my phone booting and getting stuck on the "Samsung Galaxy SII GT-I9100 splash screen... Doesn't seem to go any further than that though, unfortunately.
Any ideas what I can do? Is it possible that I need re-flash a bootloader or something ??
Any help would be supremely appreciated!
So I was just trying to re-install the Kernel, using the CF unsecured kernel, and it failed, but when I try to go into recovery mode, it looks as though it managed to install CWM Recovery. I have no idea what to do from here, and am sort of afraid to do anything for fear or bricking the phone completely...
I'm hoping someone out there knows how to fix this, I feel like such a tool
As long as you can get into download-mode, your phone isn't bricked.
If you switch from or to a TouchWiz-based ROM, you have to do a full-wipe in the recovery.
Sent from my GT-I9100 using XDA App
Go back to stock first via download mode via odin
Nah you're good. Similar thing happened to me at my first flashing attempt. Get your stock firmware from Intratech's thread, put the phone into download mode & flash the firmware via Odin.
Then maybe have another go at rooting the phone with the matching CFRoot kernel.
Porkchops said:
So I was just trying to re-install the Kernel, using the CF unsecured kernel, and it failed, but when I try to go into recovery mode, it looks as though it managed to install CWM Recovery. I have no idea what to do from here, and am sort of afraid to do anything for fear or bricking the phone completely...
I'm hoping someone out there knows how to fix this, I feel like such a tool
Click to expand...
Click to collapse
yes, if you can still go in download mode it's no so difficult..this "small brick" it's on of "Android things to do" once in your SGS2 life
Hi guys. I'm in a worst situation. As my phone after a failed ODIN downgrade from Android 2.3.6 to one stock kernel is completelly dead - it doesn't boot anymore - not even managed to put it back into download mode or revert to fact defaults (no keys, no lights not even battery charging displayed when pluged in) - tryed the USB jig also. Nothing worked.
The question is: Will Samsung manage to repair and how much will it cost - an average ammount offcourse. Because I guess it's out of the question to be considered a warranty issue. I guess it will be visible somebody have done smth to the ROM by a software approach....
This is the short story because I would bore you to discuss all the things I have been through - it was only my faoult out of stupidity
HELP!
I don't see why Samsung wouldn't fix it ? As to how much they'll charge you, I think you'll find that will vary from country to country (labour costs being variable, etc). No, I don't think you'll be able to have it repaired under warranty.
You might want to look at having it JTAG repaired by someone other than Samsung. This will possibly be cheaper than having Samsung repair it. Do a search on here/Google.
alexdonc said:
The question is: Will Samsung manage to repair and how much will it cost - an average ammount offcourse. Because I guess it's out of the question to be considered a warranty issue. I guess it will be visible somebody have done smth to the ROM by a software approach....
HELP!
Click to expand...
Click to collapse
Thank you very much. I have searched alot to actually understand - unfortunatelly for me it will cost... I saw on youtube a JTAG in action right now (cannot post the link yet). I understand now it is the only way. I'll keep you posted guys. Tomorrow I'll go to service.
I'm sorry it's going to cost Alex. A difficult thing to happen, I know
Here's a link for a JTAG repairer in the US who is also a member here, tho I see you've already found one. I'm sure doing it this way will be cheaper/probably faster than having Samsung do the repair as well.
alexdonc said:
Thank you very much. I have searched alot to actually understand - unfortunatelly for me it will cost... I saw on youtube a JTAG in action right now (cannot post the link yet). I understand now it is the only way. I'll keep you posted guys. Tomorrow I'll go to service.
Click to expand...
Click to collapse
Thax. Funny thing is that this is exactly the thing I found - the same mobiletechvideos in US Now I allready have an ideea of how much should cost that. Hopefully I'll find a local GSM repair shop with the posibilitty to unbrick it cheep - or at least not much than 50USD - in local currency ofcource.
I'm still thinking if it is possible to use an ATMEL copy process - like in the old times for EEPROMS - I have done that in the past. In theory it might work but I will never do it - alredy scared about what happened to my beloved droid.
Thx again Mistah and have a gr8 day and a wonderfull new 2012!
Yeah I've seen a report or two on here from people who have used his service & have been happy. Must admit I found his page when thought I'd bricked my phone after my first flash attempt messed up. Yeah you might be able to get it done cheaper somewhere local, and that will mean less time without the phone for you without the phone in mail from you to the US & back again.
Let us know how you get on, your experience will be a good guide for people in future who have the same problems as you.
No probs man, happy to give you the little help I did. You too Alex Hope you have a great year & you get your phone back & working soon
alexdonc said:
Thax. Funny thing is that this is exactly the thing I found - the same mobiletechvideos in US Now I allready have an ideea of how much should cost that. Hopefully I'll find a local GSM repair shop with the posibilitty to unbrick it cheep - or at least not much than 50USD - in local currency ofcource.
I'm still thinking if it is possible to use an ATMEL copy process - like in the old times for EEPROMS - I have done that in the past. In theory it might work but I will never do it - alredy scared about what happened to my beloved droid.
Thx again Mistah and have a gr8 day and a wonderfull new 2012!
Click to expand...
Click to collapse
Hello again. Solved right now. The service didn't charged me at all - I was kind of lucky after all. Unfortunately there are still some issues I have from the start. I'll keep on digging - software related.
hi
I need help with my new Samsung galaxy Sii GT-i9100. the phone comes with a stock android gingerbread os. I was looking to upgrade to jellybean but Samsung kies keep failing to complete this due to an unknown error. I then began looking into a supernexus rom as a friend recommended it. after a day of fiddling and searching on the internet for a way to do this. I found a different forum that someone had the same problem with the same kernel as i have. the answer was to install a cm-root kernel. After booting into download mode i installed this kernel and then my phone diden't restart. it has continued to show no other sign of life even after charing.
please help
Kelvin:crying:
kelvin.m said:
hi
I need help with my new Samsung galaxy Sii GT-i9100. the phone comes with a stock android gingerbread os. I was looking to upgrade to jellybean but Samsung kies keep failing to complete this due to an unknown error. I then began looking into a supernexus rom as a friend recommended it. after a day of fiddling and searching on the internet for a way to do this. I found a different forum that someone had the same problem with the same kernel as i have. the answer was to install a cm-root kernel. After booting into download mode i installed this kernel and then my phone diden't restart. it has continued to show no other sign of life even after charing.
please help
Kelvin:crying:
Click to expand...
Click to collapse
First of all: next time use a proper title for a new thread, because this one isn't quite 'usefull'..
Now, you say your phone doesn't show a sign of life. Do you mean it wont boot? Or can you enter Download mode? If so, try to reflash the kernel, and make sure it's the right one. You could also flash official firmware via Odin, if you want to.
Sent from the Matrix
Donnie Sins said:
First of all: next time use a proper title for a new thread, because this one isn't quite 'usefull'..
Now, you say your phone doesn't show a sign of life. Do you mean it wont boot? Or can you enter Download mode? If so, try to reflash the kernel, and make sure it's the right one. You could also flash official firmware via Odin, if you want to.
Sent from the Matrix
Click to expand...
Click to collapse
sorry about the title i was panicking my new phone is not working.
the phone does not respond to any thing i tried charging it to see if the battery was dead but the phone just got hot. i can't get to download mode and just plugging the phone in and trying to re-flash the old kernel with Odin just says awaiting connection.
is the kernel bricked????????????????
kelvin.m said:
sorry about the title i was panicking my new phone is not working.
the phone does not respond to any thing i tried charging it to see if the battery was dead but the phone just got hot. i can't get to download mode and just plugging the phone in and trying to re-flash the old kernel with Odin just says awaiting connection.
is the kernel bricked????????????????
Click to expand...
Click to collapse
Sorry, I'm not an expert at this point. Search for threads about hard bricks, and possible solutions (or anyone else has to have a better answer). Good luck anyway.
Sent from the Matrix
First off, chill out.
Then read this and try some of the possible fixes.
If nothing works, come back and we'll tell you what to do so you can get a new phone claiming warranty.
gastonw said:
First off, chill out.
Then read this and try some of the possible fixes.
If nothing works, come back and we'll tell you what to do so you can get a new phone claiming warranty.
Click to expand...
Click to collapse
my phone will not enter recovery mode or download mode. it will not turn on at all.
If you've completely bricked your phone. ..
Take your Battery out of the phone and charge with external charger. ..
After that use a USB Jig(should get on ebay, isn't much expensive) to boot your phone into download mode and Flash the stock Rom using Odin...
If this doesn't work then going to the official Samsung store should be your move..
Press thanx if I helped...
Sent from my GT-I9100 using xda app-developers app
Hi there,
A few days ago, I noticed my i9100 (international s2) was barely charing anymore. It would take ages (hours, literally!) to charge to 20 percent while off, and when on, it would even drain slowly while being charged. I switched to another charger and I had the same problem.
I decided to downgrade to official firmware (was on cm10.1 before), but noticed my computer wouldn't recognise my phone anymore. It wasn't a driver issue, because my ubuntu, my netbook and my tablet wouldn't see it either. In fact, there wouldn't even be a USB-debugging icon on my phone. Windows does, however, make the connected sound and my phone does charge.
I reinstalled stock firmware via CWM, but still nothing. So I'm sort of afraid this is a hardware issue. I'm looking to sell this phone within a month (I've bought a Nexus 4!) but I want it to be in working order.
Do I need to contact Samsung, or is there anything else I could do myself?
Thanks in advance.
edit > Additional info: Windows tells me my device has malfunctioned.
Replace USB flex in phone. If it's still under warranty, reset the flash counter & send it in. If there's no warranty, you can do it yourself. You can buy the parts cheaply online (Google search) & do it yourself, there are threads on here & a Google search should yield the info you need to change it. If you're not confident enough to do it yourself, buy the parts online & pay a local mobile shop to do it.
Duveaux said:
Hi there,
A few days ago, I noticed my i9100 (international s2) was barely charing anymore. It would take ages (hours, literally!) to charge to 20 percent while off, and when on, it would even drain slowly while being charged. I switched to another charger and I had the same problem.
I decided to downgrade to official firmware (was on cm10.1 before), but noticed my computer wouldn't recognise my phone anymore. It wasn't a driver issue, because my ubuntu, my netbook and my tablet wouldn't see it either. In fact, there wouldn't even be a USB-debugging icon on my phone. Windows does, however, make the connected sound and my phone does charge.
I reinstalled stock firmware via CWM, but still nothing. So I'm sort of afraid this is a hardware issue. I'm looking to sell this phone within a month (I've bought a Nexus 4!) but I want it to be in working order.
Do I need to contact Samsung, or is there anything else I could do myself?
Thanks in advance.
edit > Additional info: Windows tells me my device has malfunctioned.
Click to expand...
Click to collapse
I have the same problem , and I thing it's battery problem, my Micro USB entry is working with everthing.I suggest to buy another battery , like I did.
MistahBungle said:
Replace USB flex in phone. If it's still under warranty, reset the flash counter & send it in. If there's no warranty, you can do it yourself. You can buy the parts cheaply online (Google search) & do it yourself, there are threads on here & a Google search should yield the info you need to change it. If you're not confident enough to do it yourself, buy the parts online & pay a local mobile shop to do it.
Click to expand...
Click to collapse
I'm still under warranty, so that shouldn't be a problem. I just wanted to confirm it was a hardware problem.
I'll try to reset the counter, then call Samsung. Thanks!
@lasic, Thanks, but since there also is a USB connectivity problem, I don't think a new battery will fix that.
Edit -> However, I've encountered a new problem. Because I've flash a CWM flashable ZIP, even my current ROM knows it's been tampered with. I can't use ODIN to flash an original factory image from sammobile.
Sounds a lot like it given what you described. Make sure you backup before you send it in, 'authorised repairers' are notorious for wiping phones/flashing new stock firmware regardless of what's wrong with the phone
Re: the 'new' problem, what happens when you try to flash a stock rom with Odin ?
MistahBungle said:
Sounds a lot like it given what you described. Make sure you backup before you send it in, 'authorised repairers' are notorious for wiping phones/flashing new stock firmware regardless of what's wrong with the phone
Re: the 'new' problem, what happens when you try to flash a stock rom with Odin ?
Click to expand...
Click to collapse
Yeah I'm prepared for factory resets I'll make sure to back-up all my photos and carbon backups as well
When I try to connect my phone to Odin, it just doesn't see it, so it's the same problem. I don't think I can use USB to flash a stock rom anymore Right now, I've flashed a stock rom using CWM, rooted it, used TriangleAway and will probably unroot it after. But Samsung would be able to see the traces (such as wrong recovery, maybe more.
Ahhh OK. Perhaps flash a stock rom with Mobile Odin ? Also, there used to be CWM flashable stock roms somewhere in the General section. Or...Perhaps if there's an stock Kies/OTA update available, if you use that it should unroot your phone/give you stock recovery back.
MistahBungle said:
Ahhh OK. Perhaps flash a stock rom with Mobile Odin ? Also, there used to be CWM flashable stock roms somewhere in the General section. Or...Perhaps if there's an stock Kies/OTA update available, if you use that it should unroot your phone/give you stock recovery back.
Click to expand...
Click to collapse
I will try that. Thanks for your input! :good:
No probs. Good luck
MistahBungle said:
Ahhh OK. Perhaps flash a stock rom with Mobile Odin ? Also, there used to be CWM flashable stock roms somewhere in the General section. Or...Perhaps if there's an stock Kies/OTA update available, if you use that it should unroot your phone/give you stock recovery back.
Click to expand...
Click to collapse
Mobile Odin did the trick and my phone is up for repairs. Should be no trace left. Thanks!
Good to hear. You're welcome
Duveaux said:
Mobile Odin did the trick and my phone is up for repairs. Should be no trace left. Thanks!
Click to expand...
Click to collapse
Please add [SOLVED] to the title of ur post then.
"To err is human, to forgive is divine"
Sent from my SGS II
Hey guys !
Well...
Yesterday, I decided to flash a new ROM on my aunt's SII...
It wasn't the first time I did this : my own phones have all been flashed, I know how it works !
But... I got a problem ! While I was wiping the data/cache, the phone got stuck on this step. Then, shut down. And now, it doesn't boot anymore. Screen stays black. I did everything I found on the web : tried to boot on recovery and on download mode, tried to press the buttons to get into these modes and inserting the battery while pressing, tried to connect it on USB (not even detected)...
After some researches, I found out that it was a eMMC problem...
Anyway, in a nutshell, my phone is hard bricked. What can I do ?
Thanks.
rohecla said:
Hey guys !
Well...
Yesterday, I decided to flash a new ROM on my aunt's SII...
It wasn't the first time I did this : my own phones have all been flashed, I know how it works !
But... I got a problem ! While I was wiping the data/cache, the phone got stuck on this step. Then, shut down. And now, it doesn't boot anymore. Screen stays black. I did everything I found on the web : tried to boot on recovery and on download mode, tried to press the buttons to get into these modes and inserting the battery while pressing, tried to connect it on USB (not even detected)...
After some researches, I found out that it was a eMMC problem...
Anyway, in a nutshell, my phone is hard bricked. What can I do ?
Thanks.
Click to expand...
Click to collapse
what stock firmware version was the Phone when u did the wipe from recovery (if it was on ICS 4.0.4 then ur phone will be bricked because of the kernel of ICS4.0.4 being plagued with the 'EMMMC' brick bug and only a JTAG or a MB replacement is the solution for it) .
JTAG won't work; motherboard replacement or bin.
I think it was 4.0.4...
Motherboard replacement is the only thing I can do ?
Mate.... Samsung KNOWS this is a problem.......I'd try for warranty repair/replacement.....if the phone is less than two years old, you have a good chance......
Just remember to 'act dumb' at the service center..... Tell them you were trying to use kies to update from ICS and the phone died...... If it is the emmc brickbug, there's NO WAY they can check what os was on ur phone or whether you'd rooted or modified it in any way.....right now it's an unrecoverable (expensive) paperweight........
This might be my S2, or it might be my W...but it's definitely CM
Yeah, I saw this is a quite common problem... But often, it's just a soft brick. In my case, it's a hard brick...
And warranty expired two months ago...
Well, it's unlikely to succeed, but you could try emailing Samsung explaining your situation regarding expired warranty and going on to explain that updating with kies is a 'normal' procedure and that it's that 'normal' Samsung provided procedure plus the 'unstable' OS version (having read on the internet about 4.0.4 brickbug) that have killed a phone that would otherwise be working today. Stress the point that the ICS firmware AND kies were both supplied by Samsung for official (end user) use on Samsung devices......see what they say.....can't hurt right?
This might be my S2, or it might be my W...but it's definitely CM
Yeah, they're going to honour an expired warranty. That happens all the time
Mb....I *did* say right at the start that it probably wouldn't work..... But what has he got to lose?
Lol.....they *might* be suffering from an excess of Xmas and new year goodwill.......
This might be my S2, or it might be my W...but it's definitely CM
I have twice super bricked my two SGS-2s.... EMMC bug is one hell of a pain in ass. You have to let go some SD card space, but u can revive you phone using the URL in my signature. I revived both my phones losing about a GB space in one and a couple GBs in other. Good Luck
alvinasnow said:
but u can revive you phone using the URL in my signature
Click to expand...
Click to collapse
People have said he needs a new motherboard.Do you know something they dont?.
S4 victim
The problem is that I can't flash anything ! The phone simply doesn't turn on ! No recovery mode, no download mode, nothing ! It doesn't even charge !
Yes try this link from alvinasnow
http://forum.xda-developers.com/showthread.php?t=1667886
So far as I know if you only connect your phone normally if it os charging then it already has some kind of connection with the pc I believe its adb.
But since you dont have warranty you can give it a shot to save money so just give it a try and read carefully. I was surprised when I got this phone, that samsung would make a big mistake like that its a just shame.
Edit: i dont know or you need jtag or riff and I will not test it cause I dont have a superbrick phone with mmc cap erase.
But just open device manager on the pc and connect the phone and see if there is a new device connected.
In my opinion my previous phone has one of the best options to make it unbrickable
It was nvflash but it sucked.nvidia wouldnt release sources.
Gooodluck with your phone
Sent from my GT-I9100 using Tapatalk
Which part of this phone needs a motherboard replacement are you lot having trouble comprehending ?
OK...For all the slow kids who keep posting to this thread (including the OP); this phone needs a new motherboard. No threads promising magical fixes are going to work, there is no other way to fix this.
Is this clear now or do I have to make another post in bolded caps to make it really clear ?
There is a SLIGHT chance that if a JTAG recovery house can boot a kernel via JTAG (I do not know if RIFFBox can do this or not), they can use the solution that the Kindle Fire community used. (This was a recent discovery 2-3 months ago)
The problem is, I have attempted to provide information on this solution to these JTAG houses with no response. I don't know if they can boot a modified kernel via JTAG or not.
Currently:
All Exynos4 devices that are Superbricked are unrecoverable, as Samsung refuses to provide any way to boot these from USB, and anyone who could develop a solution hasn't responded (since most dead devices are long gone at this point...)
All Qualcomm-based Samsungs that are Superbricked are hosed too
Kindle Fires that are Superbricked are recoverable as of 2-3 months ago thanks to some discoveries by Oranav that were used by Hashcode to develop a recovery solution. This solution can't be used on Samsung Exynos4 devices as it depends on the ability to boot the device from USB.
And folks...... @Entropy512 needs to be listened to.......he is the dev who has done the most research into this issue and (somebody cmiiw) was the one who discovered the "emmc cap erase" command was the culprit. I think he also wrote the original (much copied) 'got brickbug' app which tells you if your phone is affected or not. If what he says doesn't work, then as @MistahBungle says, the ONLY OTHER OPTION is a new motherboard........
This might be my S2, or it might be my W...but it's definitely CM
Well...
I think I'm just going to call the insurance, and see what they can do ! Even if my warranty is now void, they may replace the phone !
Thank you all !