[HOW-TO]Flash T-Mobile USA Radio In Recovery - T-Mobile HTC One (M7)

HOW TO Flash T-Mobile USA Radio (Needs More Work)
All credit goes to he_stheone64 and his thread located here: http://forum.xda-developers.com/showthread.php?t=2245615
Credit: The War Horse - for telling me the obvious, how to get the radio was listed in the thread above all along
I apologize that is my first stab at development and for any errors you may or may not run into. This is fully expected to work with he_stheone64 method above as the only thing I changed was the radio.img.
This thread taught me how to extract the T-mobile USA radio from my HTC One. Now its time for those in the community who really want to have T-mobile 3G speeds to test this out!
This is for you and you deserve it. As I promised with no more words....
This is how you can upgrade your RADIO without S-Off
1. Download Radio update.zip below and copy to your SD
2. Only an optional step for those, who want to have a Radio Firmware backup just in case
a) Connect your device via USB in recovery and open cmd in fastboot folder:
adb shell
dd if=/dev/block/mmcblk0p31 of=/sdcard/radio_firmware.img
You will now have current Radio on SD as radio_firmware.img
Expected output:
PHP Code:
PHP Code:
Code:
~ # dd if=/dev/block/mmcblk0p31 of=/sdcard/radio_firmware.img
dd if=/dev/block/mmcblk0p31 of=/sdcard/radio_firmware.img
153601+0 records in
153601+0 records out
78643712 bytes (75.0MB) copied, 11.826523 seconds, 5.4MB/s
3. Now just flash the Radio update.zip as usual in recovery, reboot your device and enjoy latest Radio
In case you want / need to restore your current Radio backup:
Either you adjust updater script to radio_recovery.img or just do it via adb in recovery:
dd if=/sdcard/radio_firmware.img of=/dev/block/mmcblk0p31
Download Radio from:
https://mega.co.nz/#!d9wz0QDA!DF1QoGnkPuDt3ttjpGz1xSqh9U0ZDUtEpPG15vA_61E
MD5: 7BACD1B72F53859A52A3EB6CB3FB5433

Not only would this be better placed in Q&A but there is a thread specifically about this in the dev sub.
http://forum.xda-developers.com/showthread.php?t=2245615
To answer your question though, you will need to get the T-mo radio to be able to flash it.

anit77 said:
Not only would this be better placed in Q&A but there is a thread specifically about this in the dev sub.
http://forum.xda-developers.com/showthread.php?t=2245615
To answer your question though, you will need to get the T-mo radio to be able to flash it.
Click to expand...
Click to collapse
Thanks! However, it was stated in this thread that we first need the T-mobile radios right? so Im asking.
If anyone has the t-mobile radios please offer it here for download. Then we can begin the progress on flashing it over to test on the dev editions. Thanks

Yes! Please help! Thanks in advance *^O^*

If you get the radio, could be used on the att htc one x plus?
I'm currently using the att one x+ on t-mobile.

garmig said:
If you get the radio, could be used on the att htc one x plus?
I'm currently using the att one x+ on t-mobile.
Click to expand...
Click to collapse
Pronably not
Sent from my SGH-T999 using xda app-developers app

EclipzeRemix said:
Pronably not
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
So, I have the t-mobile htc one in hand. However, just how do I go about getting the radios so I can share it with everyone here?
Can anyone please give me a step by step tutorial?
Thanks

Becool0130 said:
So, I have the t-mobile htc one in hand. However, just how do I go about getting the radios so I can share it with everyone here?
Can anyone please give me a step by step tutorial?
Thanks
Click to expand...
Click to collapse
Hi you can follow this thread to save the radio image.
http://forum.xda-developers.com/showthread.php?t=2245615

Becool0130 said:
Title says it. Need a T-Mobile radio dump to get T-Mobile frequencies working for you guys. Thanks so much.
I want to give the community - especially the ones with a developer edition or ATT - a way to flash Tmobile radios
Please post the download link here and we can all test it out and see if it works.
This can be done with S-On too! Please see this thread:
http://forum.xda-developers.com/showthread.php?p=40603094&highlight=t-mobile#post40603094
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Ok just dumped the radio from my phone. Hope it works out.
T-Mobile_Radio1.27.431.7

xdarkfirex said:
Ok just dumped the radio from my phone. Hope it works out.
T-Mobile_Radio1.27.431.7
Click to expand...
Click to collapse
Thanks so much! This thread has been updated and reflects how to flash the t-mobile radio via recovery.
Lets get on with it and let me know if it works out for you!! :good:

Thanks guys for making this possible.
I'm trying to backup the original radio but got the permission denied message.
Did i missed anything?
1. The phone was booted in recovery mode.
2. open CMD and go to phone's adb directory
3. typed the adb shell command and then see the rest command log
J:\adb>adb shell
adb server is out of date. killing...
* daemon started successfully *
[email protected]:/ $ dd if=/dev/block/mmcblk0p31 of=/sdcard/radio_firmware.img
dd if=/dev/block/mmcblk0p31 of=/sdcard/radio_firmware.img
/dev/block/mmcblk0p31: cannot open for read: Permission denied
1|[email protected]:/ $
My one is the developer version

Can anyone confirm that tmobile 1700 AWS is working on dev edition?

I'm on Tmo with a 32gb unlocked One, so I gave it a shot. I have a SGS2 as well so I know I get HSPA+ here and not Edge, which is what I'm getting now on my One.
I backed up the radio, unlocked the bootloader, flashed recovery, flashed supersu, flashed Tmo radio, did factory reset. No luck, still getting Edge on my One.
---------- Post added at 01:45 PM ---------- Previous post was at 01:40 PM ----------
sai0899 said:
Thanks guys for making this possible.
I'm trying to backup the original radio but got the permission denied message.
Did i missed anything?
1. The phone was booted in recovery mode.
2. open CMD and go to phone's adb directory
3. typed the adb shell command and then see the rest command log
J:\adb>adb shell
adb server is out of date. killing...
* daemon started successfully *
[email protected]:/ $ dd if=/dev/block/mmcblk0p31 of=/sdcard/radio_firmware.img
dd if=/dev/block/mmcblk0p31 of=/sdcard/radio_firmware.img
/dev/block/mmcblk0p31: cannot open for read: Permission denied
1|[email protected]:/ $
My one is the developer version
Click to expand...
Click to collapse
You might need to root it first. Then enter the command "su" and grant permissions before the "dd" command.

dksxmks said:
I'm on Tmo with a 32gb unlocked One, so I gave it a shot. I have a SGS2 as well so I know I get HSPA+ here and not Edge, which is what I'm getting now on my One.
I backed up the radio, unlocked the bootloader, flashed recovery, flashed supersu, flashed Tmo radio, did factory reset. No luck, still getting Edge on my One.
---------- Post added at 01:45 PM ---------- Previous post was at 01:40 PM ----------
You might need to root it first. Then enter the command "su" and grant permissions before the "dd" command.
Click to expand...
Click to collapse
I believe his phone is rooted already as he already has recovery. Your log you posted "adb server is out of date. killing..." IS CRUCIAL.
You need to launch adb and update it. How? In windows 7 just press start and type in "sdk manager". Everything is straight forward from there. Then try again

I have a tmobile with 1.27.531.7 Is this of any use to anyone?

Can I flash this radio on my unlocked AT&T HTC One? Using it on T-Mobile now but only get edge

dutchtrumpet said:
I have a tmobile with 1.27.531.7 Is this of any use to anyone?
Click to expand...
Click to collapse
As do I. I'm wondering what the difference is.
Sent from my HTC One using xda premium

jonathan3579 said:
As do I. I'm wondering what the difference is.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Your looking for the BASEBAND in settings not the software version running on the phone. Anyhow, please try it out and let me know how it goes. I believe it needs some more work -_-

Airo18 said:
Can I flash this radio on my unlocked AT&T HTC One? Using it on T-Mobile now but only get edge
Click to expand...
Click to collapse
This is what we're hoping but we need a brave soul to try it out. If it works, it means that we can buy the unlocked / developer editions and bring them to tmobile with full 3g/4g/lte!

advocat3 said:
This is what we're hoping but we need a brave soul to try it out. If it works, it means that we can buy the unlocked / developer editions and bring them to tmobile with full 3g/4g/lte!
Click to expand...
Click to collapse
If I flash this and all goes downhill, can I flash an RUU back to stock? Wouldn't mind testing

Related

[Req] Stock recovery image

I've corrupted my recovery image. I'd be very grateful to anyone who could take a minute to grab the image from their amaze.
Here's the step-by-step on how to do it:
1. Unzip zergRush from the attached zipfile. Place it on your PC
2. Push it to your phone using adb (adb push zergRush /data/local)
3. Adb shell to your phone (adb shell)
4. cd to /data/local (cd /data/local)
4. Run zergRush (./zergRush)
5. It will churn for a bit and then you should have temp root.
6. Adb shell back onto the phone. (adb shell)
7. From the # prompt run (dd if=/dev/block/mmcblk0p23 /sdcard/recovery.img)
8. post the recovery image somewhere I can access.
9. receive my gratitude
tia
-xdadevelopers-user
Here you go....
http://dl.dropbox.com/u/19769336/recovery.img
Thank you!
I feel much better now that I have a working recovery - though I'm not exactly sure why.
-xdadevelopers-user
other than fastboot how would you push it back to the device
Hboot
Sent from my HTC Sensation Z710e using xda premium
crackeyes said:
other than fastboot how would you push it back to the device
Click to expand...
Click to collapse
I guess in theory, if you have root, you could dd it back to the correct partition from the running android os.
Code:
#dd if=recovery.img of=/dev/block/mmcblk0p23
Though I haven't tried that. I just used fastboot.
-xdadevelopers-user
xdadevelopers-user said:
I guess in theory, if you have root, you could dd it back to the correct partition from the running android os.
Code:
#dd if=recovery.img of=/dev/block/mmcblk0p23
Though I haven't tried that. I just used fastboot.
-xdadevelopers-user
Click to expand...
Click to collapse
that worked but it is still f'ed up this phone is a brick LOL oh well lets see how i can fry it and get a new one
crackeyes said:
that worked but it is still f'ed up this phone is a brick LOL oh well lets see how i can fry it and get a new one
Click to expand...
Click to collapse
hey crack eyes could you test something for me?
Code:
dd if=(direcotry path to hboot.img Example: C:\Hboot.img) of=/dev/block/mmcblk0p12
could you trry that with this hboot.img
http://www.multiupload.com/D7HEFK9DH6
exract hboot.img first then place in c:\
xboarder56 said:
hey crack eyes could you test something for me?
Code:
dd if=(direcotry path to hboot.img Example: C:\Hboot.img) of=/dev/block/mmcblk0p12
could you trry that with this hboot.img
http://www.multiupload.com/D7HEFK9DH6
exract hboot.img first then place in c:\
Click to expand...
Click to collapse
That cannot work. The example you provide has the input file on the PC and the output file is a block device on the phone. The dd command, when run from a PC won't be able to see the output file since it doesn't exist on the PC. Or, if you run dd from the phone it won't be able to see the hboot.img because it's on the PC - not the phone.
For it to work you'd need to first get the hboot.img on the phone somewhere. If you have an sd card you could copy it to /sdcard or you could put it on /data/local.
Then the command would be something like:
dd if=/sdcard/hboot.img /dev/block/mmcblk0p12
And, of course for this to work you'd need an unlocked bootloader and a working device that has root. And, even then, I'd guess this would either not work or brick the device. But, if someone's willing to test it then, hey, who am I to say otherwise - go for it!
-xdadevelopers-user
cmenard said:
Here you go....
http://dl.dropbox.com/u/19769336/recovery.img
Click to expand...
Click to collapse
Can anyone verify if the recovery in the above link is the Stock Recovery for T-Mo Amaze? I'm on GB and want to get the ICS OTA update but Hasoon has removed the Stock Recovery from his AIO toolkit. Thanks!
ernieg92 said:
Can anyone verify if the recovery in the above link is the Stock Recovery for T-Mo Amaze? I'm on GB and want to get the ICS OTA update but Hasoon has removed the Stock Recovery from his AIO toolkit. Thanks!
Click to expand...
Click to collapse
You don't need a stock recovery, just repock boot loader and apply update
Sent from my HTC_Amaze_4G using Tapatalk 2
Just do what? Thanks
EclipzeRemix said:
You don't need a stock recovery, just repock boot loader and apply update
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
Wrong place to ask questions
Sent from my HTC_Amaze_4G using xda premium

[NOT WORKING(FOR NOW)][BOOTLOADER] SuperCID 11111111

DO NOT TRY, THIS WILL NOT WORK FOR NOW.
Hey guys, here's the manual for how to get SuperCID WITHOUT S-OFF.
NOTE: THIS IS NOT FOR BEGINNING USERS, YOU WILL CHANGE THE BOOTLOADER WHICH MIGHT BRICK YOUR DEVICE, BE CAREFUL
Thanks to vogonpoetlaureate for finding where the CID is, he's a great guy so go thank him!
Assuming you have ADB (Android Debugging Bridge) installed, open up your command prompt and type this:
Code:
su
dd if=/dev/block/mmcblk0p7 of=/sdcard/mmcblk0p7
Now you have it dumped on your SD-Card
Next, type "exit" and again, "exit".
Type
Code:
adb pull /sdcard/mmcblk0p7
BE SURE YOU KNOW WHAT SIZE IT IS BEFORE CONTINUING
Open the file with your HEX-Editor, assuming you have one downloaded. I personally use XVI32.
You will see your CID on the fourth line, in my case it's HTC__E11.
Change it to 11111111 and save the file as mmcblk0p7MOD. BE SURE IT'S THE EXACT SAME SIZE AS BEFORE.
When you're back in command prompt, type
Code:
adb push mmcblk0p7MOD /sdcard/mmcblk0p7MOD
Type
Code:
adb shell
su
dd if=/sdcard/mmcblk0p7MOD of=/dev/block/mmcblk0p7
Reboot to bootloader, (adb reboot-bootloader) and go into fastboot.
Type
Code:
fastboot oem readcid
It should read 11111111.
Thanks to grankin01 for the base thread: http://forum.xda-developers.com/showthread.php?p=26516911#post26516911
I AM NOT RESPONSIBLE FOR BRICKED DEVICES
It works with me, PLEASE, if it works with you reply here!
Just in case
Re: [BOOTLOADER] SuperCID 11111111
Thanks for the step-by-step Maarten. Very helpful.
Sent from my HTC Desire X using xda premium
Re: [BOOTLOADER] SuperCID 11111111
vogonpoetlaureate said:
Thanks for the step-by-step Maarten. Very helpful.
Sent from my HTC Desire X using xda premium
Click to expand...
Click to collapse
No problem
And thank you for pointing out the location of the CID, must have overlooked it.
Did it work for you?
Sent from my awesome fridge
Just to be sure, I need to be in "normal" system (not fastboot or hboot or recovery) to do this steps right?
I'm asking that because I'm facing this error:
[email protected]:/ # su
[email protected]:/ # dd if=/dev/block/mmcblk0p7 of=/sdcard/mmcblk0p7
dd if=/dev/block/mmcblk0p7 of=/sdcard/mmcblk0p7: cannot open for write: Read-only file system
I should say I have neXus last kernel and TWRP installed.
Thank you very much!!
Re: [BOOTLOADER] SuperCID 11111111
gbueno6 said:
Just to be sure, I need to be in "normal" system (not fastboot or hboot or recovery) to do this steps right?
I'm asking that because I'm facing this error:
[email protected]:/ # su
[email protected]:/ # dd if=/dev/block/mmcblk0p7 of=/sdcard/mmcblk0p7
dd if=/dev/block/mmcblk0p7 of=/sdcard/mmcblk0p7: cannot open for write: Read-only file system
I should say I have neXus last kernel and TWRP installed.
Thank you very much!!
Click to expand...
Click to collapse
Try using those commands in recovery, then it'll work.
Sent from my awesome fridge
MaartenXDA said:
Try using those commands in recovery, then it'll work.
Sent from my awesome fridge
Click to expand...
Click to collapse
I found out which was the mistake: I was in Hard Disk mode. In charge only mode it worked. Now I'll transfer the file again, reboot to bootloader and see if it worked!
By the way, did it work for you?
Thank you
Re: [BOOTLOADER] SuperCID 11111111
gbueno6 said:
I found out which was the mistake: I was in Hard Disk mode. In charge only mode it worked. Now I'll transfer the file again, reboot to bootloader and see if it worked!
By the way, did it work for you?
Thank you
Click to expand...
Click to collapse
Yep, worked for me.
But still, please report.
Sent from my awesome fridge
MaartenXDA said:
Yep, worked for me.
But still, please report.
Sent from my awesome fridge
Click to expand...
Click to collapse
Not for me! (
I'll try again later because I don't know what I'm doing wrong!
So, just in case... restoring old CID = changing value to old CID?
Great job, but I don't think I will need this thing. Nevertheless it's great job done, because AFAIK changing CID will help to get rid of sim lock by such operators as Verizon, Orange, Vodafone. Am I thinking the right way?
A huge thanks to all the devs who worked on this.
Re: [BOOTLOADER] SuperCID 11111111
MaartenXDA said:
Just in case
Click to expand...
Click to collapse
Doesn't that mean we can now achieve S-OFF.?
Sent from my HTC Desire X using xda premium
Great work! I have contacted the devs of facepalm to get us S-OFF. They were waiting for us to get superCID .
Klapo said:
So, just in case... restoring old CID = changing value to old CID?
Click to expand...
Click to collapse
Yes, keep a backup of the file handy so you can just restore it if you need to.
Please, to all the guys that have made it, can you tell me what kernel and recovery did you have installed?
Because I've tried it again, every single step, and I'm still with my carrier CID: ORANG309.
Thank you very much!
HT__044
Hello and thank you for the nice info...
I have tried several times on CID HTC__044 and still i'm on the same CID...
is there any comment or solution for this?
anyway thanks a lot...
Edit: Nah that shouldn't matter.
Thanks!
I see "ro" so that's why is not working. It seems strange considering I have flashed neXus V3 kernel which has System Protection Disabled but I've flashed it again and see if I see "rw" instead of "ro".
Thank you again!
EDIT: Tried again with a "fresh" flash of neXus kernel and no way to make it work. I'm getting kind of desperate
I have tried it with system protection off even and still the same...
What I need is just to flash back to the the factory firmware, My phone is Asian (Singapore) and I coudnt find the Asian RUU till now...
I cant flash the European version because of the CID...
I dont know what to do...

[Q] Vodafone UK 1.17 RUU Request

Hello all, I've been searching for the past 2 and a half days to no avail.
I'm after the Vodafone UK 1.17 RUU.exe file; I've fubar'd my phone and can't flash the stock rom to start again. I've managed to re-lock the bootloader, but I cannot ADB into the phone to transfer a rom etc so need to start back as stock and cannot for the life of me find the Vodafone UK 1.17 RUU.exe file.
Anyone offer any help?
:good:
adamtheluck said:
Hello all, I've been searching for the past 2 and a half days to no avail.
I'm after the Vodafone UK 1.17 RUU.exe file; I've fubar'd my phone and can't flash the stock rom to start again. I've managed to re-lock the bootloader, but I cannot ADB into the phone to transfer a rom etc so need to start back as stock and cannot for the life of me find the Vodafone UK 1.17 RUU.exe file.
Anyone offer any help?
:good:
Click to expand...
Click to collapse
Just to clarify, I was unable to ADB or access the phone before re-locking the bootloader so got it re-locked in preparation of running the RUU.
http://d-h.st/Sp2 tryy that and remember to post the end results
It does state 1.14, but I'll give it a go and let you know!
only one I could find mate.... hopefully it will work If you could let us know that would be useful to know just in case I get in a mess sometime in the future
It's given the error of incorrect bootloader (HBOOT I think it means). Updating my phone to 1.17 changed the bootloader to 1.40 so I need the 1.17 RUU. Really appreciate your help though, and from a fellow Nottingham citizen too!
I had already tried the 1.14 RUU and that hadn't worked. Just need to wait on someone to release the 1.17 or higher for my CID. I'm ok in the meantime as I've bought myself an Xperia Z, so the One x+ will be sold as soon as it's working
First off I know sounds daft but.... you did relock the bootloader? if not is there a file somewhere with the old hboot you could flash?
And more strangely I had a xperia z until I swapped it for the hox+ lol Would love to know why you like the xperia better?
EDIT - do you need stock recovery installed also???
EDIT EDIT - what about this file? http://androidfiles.org/ruu/securekey.php?file=ENRC2B/RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed.exe
Oh and lastly the other freaky thing was the guy I swapped my xperia with was called Adam lol only he was from derby
Yeah I re-locked the bootloader before trying the RUU; even tried it with an unlocked bootloader. The fact I can re-lock and unlock the bootloader gives me hope that the phone isn't completely unrepairable.
The link you've provided has a different CID number to what's installed so it probably won't work, but I'll try anything at this point so thank you again
I like the screen size (big hands) and I find it runs alot more smooth than my one x+. The only downside so far is the battery life, whilst it's not bad I do feel I could squeeze an extra hour or two out of the HOX+.
Re the swapping of the phones, funny how coincidences happen from time to time!
EDIT - I've got it as much stock I can without the RUU, and I think it is stock recovery as the RUU only fails as the HBOOT version being higher than the version that's trying to be installed - thus not completing the install. Also, I don't think we can downgrade the HBOOT until we get S-Off.
i know this going to sound silly but why did you need to return to stock anyway? Could you not sideload a rom onto it with twpr ? I've been testing sideloading on cwm but it dont seem to work :crying: http://forum.xda-developers.com/showthread.php?t=1995002
Its worth a try no?
My friends kid accidentally formatted the whole phone when playing with it. Don't ask lol
I tried side loading a Rom but couldn't get it to work, so tried everything before relocking the bootloader in hope there's an RUU released.
Sent from my Xperia Z White using xda premium
Can also push the rom to the phone with adb while in recovery mode using the 'adb push rom.zip /data/media/' command
Sent from my HTC One X+ using xda premium
Tried it mate, as I said in the OP I can't adb into the phone so can't push anything over
Sent from my Xperia Z White using xda premium
adamtheluck said:
Tried it mate, as I said in the OP I can't adb into the phone so can't push anything over
Sent from my Xperia Z White using xda premium
Click to expand...
Click to collapse
right Ive just done a bit of testing, I can confirm pushing files and side loading dont work with cmw but with the latest version of TWRP 2.4.4.0 everything works file
C:\sdk\platform-tools>adb devices
List of devices attached
FA2CPW101442 recovery
C:\sdk\platform-tools>adb push rom.zip /data/media/
1997 KB/s (17155367 bytes in 8.387s)
C:\sdk\platform-tools>
Click to expand...
Click to collapse
I didnt try sideloading but pushing a file would do the trick.
could you not downgrade your hboot with this? http://forum.xda-developers.com/showthread.php?t=1995685
Finally got the phone back from the dead!
Turns out I needed to reboot my laptop at each new command; i.e. adb command > reboot > adb command > reboot etc etc
Thanks for your help, if I find the 1.17 RUU I'll post it here
adamtheluck said:
Turns out I needed to reboot my laptop at each new command; i.e. adb command > reboot > adb command > reboot etc etc
Click to expand...
Click to collapse
Probably your SDK tool is incorrectly installed and / or the HTC's drivers. It's very simple to install have a look at this tutorial.
adamtheluck said:
Finally got the phone back from the dead!
Turns out I needed to reboot my laptop at each new command; i.e. adb command > reboot > adb command > reboot etc etc
Thanks for your help, if I find the 1.17 RUU I'll post it here
Click to expand...
Click to collapse
out of interest which recovery was you running ? also did you sideload or push the rom?
Oh and welcome back although you are sell it no?
---------- Post added at 04:44 PM ---------- Previous post was at 04:42 PM ----------
@Lucky Thirteen Good tutorial, promptly bookmarked for the next time I format my PC
ratcom said:
out of interest which recovery was you running ? also did you sideload or push the rom?
Oh and welcome back although you are sell it no?
Click to expand...
Click to collapse
I managed to push the rom to sdcard/twrp folder; which also answers the first question lol.
Just want to say again thanks for your help!
Selling it as I love the xperia, think I need a break from HTC and sense based roms for a while! Still like the hox+ but fancy keeping the Sony lol
Sent from my Xperia Z White using xda premium
adamtheluck said:
I managed to push the rom to sdcard/twrp folder; which also answers the first question lol.
Just want to say again thanks for your help!
Selling it as I love the xperia, think I need a break from HTC and sense based roms for a while! Still like the hox+ but fancy keeping the Sony lol
Sent from my Xperia Z White using xda premium
Click to expand...
Click to collapse
happy ending is all that counts my friend :victory:

[Tutorial] Make your T-Mobile HTC ONE a Developer Edition!!

Hey Everybody..
Here a little guide to how to make you T-Mobile HTC One a Developer Edition and receive OTA updates directly from HTC with no carries delays.
after downloading and unzip the revone.zip file do the following:
MAKE SURE YOUR ADB AND FASTBOOT ARE WORKING PROPERLY. AND UNINSTALL HTC SYNC MANAGER BEFORE DOING ANY OF THESE STEPS!!
ONLY DO THIS IF YOU ARE COMFORTABLE IN WHAT YOU DOING.
adb push revone /data/local/tmp
adb shell
cd /data/local/tmp
chmod 755 revone
./revone -P
exit
reboot your phone
adb shell
cd /data/local/tmp
./revone -s 0 -u
exit
adb reboot bootloader
your bootloader should now be S-OFF
to change CID do this:
fastboot oem writecid 11111111
fastboot reboot-bootloader
your bootloader screen should now show the new CID
you can now flash the Original RUU for the HTC One Developer Edition from http://www.htcdev.com/devcenter/downloads
i take no credit for this guide this is just a re-write from the real devs page. i wanted to make it easy for those looking in this section
Is this reversible? Also, do you get everything you get on the Tmo version except wifi calling and Tmo apps? Thanks.
I think links to the revone s-off thread would be more appropriate than just rewriting their instructions and posting their file here, don't you? Those devs deserve proper credit, and the real support for problems is going to be there....
Legaleye3000 said:
Is this reversible? Also, do you get everything you get on the Tmo version except wifi calling and Tmo apps? Thanks.
Click to expand...
Click to collapse
yes and yes
When HTC updates though wouldn't they also be updating the radio? If that's the case won't that affect our 1700 band or will we still keep it? All I care about is stock since I'm already over the whole flashing and rooting stuff. Wish HTC did a dev edition with tmobile bands.
Sent from my HTC One
Gja88 said:
When HTC updates though wouldn't they also be updating the radio? If that's the case won't that affect our 1700 band or will we still keep it? All I care about is stock since I'm already over the whole flashing and rooting stuff. Wish HTC did a dev edition with tmobile bands.
Sent from my HTC One
Click to expand...
Click to collapse
I'm running the Dev edition radio and still have 1700 band.
Gja88 said:
When HTC updates though wouldn't they also be updating the radio? If that's the case won't that affect our 1700 band or will we still keep it? All I care about is stock since I'm already over the whole flashing and rooting stuff. Wish HTC did a dev edition with tmobile bands.
Click to expand...
Click to collapse
That's extact what this guide does.. HTC one dev edition and with pentaband
Sent from my HTC One using xda app-developers app
just want to confirm, it should be this?
One
Brightstar US
USA
RUU
3.4.10
v4.1 984.7 MB
1.29.1540.16 Developer Edition
Gja88 said:
When HTC updates though wouldn't they also be updating the radio? If that's the case won't that affect our 1700 band or will we still keep it? All I care about is stock since I'm already over the whole flashing and rooting stuff. Wish HTC did a dev edition with tmobile bands.
Sent from my HTC One
Click to expand...
Click to collapse
Exactly.
Sent from my HTC One using Tapatalk 2
id10terrordfw said:
I'm running the Dev edition radio and still have 1700 band.
Click to expand...
Click to collapse
Again...
jay661972 said:
just want to confirm, it should be this?
One
Brightstar US
USA
RUU
3.4.10
v4.1 984.7 MB
1.29.1540.16 Developer Edition
Click to expand...
Click to collapse
yup.. i used that one .. everything works flawless.. no t-mobile bloatware
adb says: device not found. I installed everything. From android sdk to fastboot. Hasoon2000's all in one kit works, so it is not my USB connection. I really need to recover with a developer edition RUU. My HTC One is useless right now.
Oh well something strange happend. When I command: fastboot reboot-bootloader my HTC One reboot in to bootloader. It is not working on adb, but on fastboot commands.
YaviSGS said:
adb says: device not found. I installed everything. From android sdk to fastboot. Hasoon2000's all in one kit works, so it is not my USB connection. I really need to recover with a developer edition RUU. My HTC One is useless right now.
Oh well something strange happend. When I command: fastboot reboot-bootloader my HTC One reboot in to bootloader. It is not working on adb, but on fastboot commands.
Click to expand...
Click to collapse
boot your phone into the OS, then try the adb devices see if show up
YaviSGS said:
adb says: device not found. I installed everything. From android sdk to fastboot. Hasoon2000's all in one kit works, so it is not my USB connection. I really need to recover with a developer edition RUU. My HTC One is useless right now.
Oh well something strange happend. When I command: fastboot reboot-bootloader my HTC One reboot in to bootloader. It is not working on adb, but on fastboot commands.
Click to expand...
Click to collapse
i do have issue last night in doing the steps, decided to do it using android terminal and its flawless
---------- Post added at 02:36 PM ---------- Previous post was at 02:01 PM ----------
xitaxuta said:
yup.. i used that one .. everything works flawless.. no t-mobile bloatware
Click to expand...
Click to collapse
i run the RUU this morning but hang in Sending for more than 20 minutes thats why i remove unplug the usb
xitaxuta said:
boot your phone into the OS, then try the adb devices see if show up
Click to expand...
Click to collapse
I do not have OS. Everything on my phone is wiped. I only have a USB kabel, HTC One which is still unlocked. My only hope is S-OFF and then flash developer edition cause there is no T-Mobile RUU available
Edit: I think it works. I see a white screen with HTC logo and text at the bottom: "This is build is for development purposes only etc". So I commanded: adb reboot bootloader and it works. Bit still, when I command: adb devices, there is no device.
Is your phone with super-cid?
Sent from my HTC One using xda app-developers app
xitaxuta said:
Is your phone with super-cid?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I don't know what that means.
This is all I can say about my phone:
***TEMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
May 3 2013, 17:22:59:-1
This is what I got when I command:
C:\Android\adb push revone /data/local/tmp
failed to copy 'revone' to '/data/local/tmp' : No such file or directory
YaviSGS said:
I don't know what that means.
This is all I can say about my phone:
***TEMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
May 3 2013, 17:22:59:-1
Click to expand...
Click to collapse
Your phone is showing
S-ON
You need to s-off using the revone file.. and after that you need change it to super-cid.
Sent from my HTC One using xda app-developers app
xitaxuta said:
Your phone is showing
S-ON
You need to s-off using the revone file.. and after that you need change it to super-cid.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Yes I try to do that now. I putted the revone file in the map where my adb files are. There I opened cmd and typed this:
C:\Android\adb push revone /data/local/tmp
failed to copy 'revone' to '/data/local/tmp' : No such file or directory
I think its refers to my internal storage? Cause there are no files in my storage right now... Or is it something else?
I'm heading to work right now so won't be able to assist you until I get back home.. what rom are you using? Try to cd\android
adb push revone /data/local/tmp
Sent from my HTC One using xda app-developers app

[s-off]Firewater S-OFF for my Verizon HTC One Max w/ Hboot 2.49 !

HI Fellow XDA member.
I intially tried everything and failed. So I have decided to factory reset my Verizon HTC one MAX, and
redo the s-off. It finally worked!!!
Here are the exact steps.
Credit to MrT69 for his awesome collection of drivers.
Credit to the Firewater team for the awesome program.
Credit to all the XDA members for their contribution and anyone else I forget.
Here is my software version:
Android 4.4.2, Sense 5.5, Software version 2.16.605.2
HBoot 2.49.000
1. Factory reset your Verizon HTC One Max.
* Press and hold the VOLUME DOWN button, and then press and hold the POWER button.
* Wait for the screen with the three Android images to appear, and then release the POWER and VOLUME DOWN buttons.
* Press VOLUME DOWN to select FACTORY RESET, and then press the POWER button.
2. Go thru the basic setups. Setup Wifi which is require for Firewater to work. Make sure wifi is working.
3. Enable developer Options : Setting - About - Software - More - Tap on Build number 5 times.
* Checked - USB debugging
* unchecked - everything else
4. Goto Security.
* Check - Unkown sources
* Uncheck - Verify apps.
5. Goto Display
* Screen timeout - 1 hour.
6. Download and install Es Explorer ( or any file manager of your choice )
7. download drivers from here
http://forum.xda-developers.com/showthread.php?t=2765383
8. Install the driver in the freshly installed windows 7, x86, sp1.
9. Download Weaksauce from here. Copy into phone thru Windows Explorer
http://forum.xda-developers.com/showthread.php?t=2699091
10. Install using Es Explorer. Click I agree.
10a. Download Firewater from here
http://firewater-soff.com/instructions/
(CRITICAL - Download with Internet Explorer, WILL NOT WORK WITH ANY OTHER BROWSER.)
11. Now Run CMD.exe as Administrator in windows. Make sure adb.exe and firewater is in the same directory.
12. type the followings:
adb devices
*make to to watch the phone screen to give permission to the program.
* make sure you see the device number and device,
* if offline, that means you missed the screen to give permission to the program
adb reboot <–important!!!!
* after reboot, rerun WeakSauce and click I agree to make sure root is working.
adb wait-for-device push firewater /data/local/tmp
adb shell
su
chmod 755 /data/local/tmp/firewater
/data/local/tmp/firewater
13. Your Verizon HTC one Max is now S-OFF!!!
Discussion.
I didn't bother to run temproot because there is some script program.
If this works for you, please leave a reply. Thanks.
Mod edit: no need to quote the entire OP....
can you plz tell what to type after 12. ( type the followings
adb devices… its there..
waco2hot33 said:
adb devices… its there..
Click to expand...
Click to collapse
thanks
this have to type all togather plz help
adb wait-for-device push firewater /data/local/tmp
adb shell
su
chmod 755 /data/local/tmp/firewater
/data/local/tmp/firewater
---------- Post added at 10:49 PM ---------- Previous post was at 10:04 PM ----------
xda-developers1974 said:
Thanks its work now
Click to expand...
Click to collapse
S-OFF and unlocked now, but Fingerprint scan stop working anyone help Plz
xda-developers1974 said:
S-OFF and unlocked now, but Fingerprint scan stop working anyone help Plz
Click to expand...
Click to collapse
Is your boot loader unlocked
hi
xda-developers1974 said:
S-OFF and unlocked now, but Fingerprint scan stop working anyone help Plz
Click to expand...
Click to collapse
So u got this to work with the new sense 6 update or were u on something else
calculus said:
Download Firewater from here
http://firewater-soff.com/instructions/
(CRITICAL - Download with Internet Explorer, WILL NOT WORK WITH ANY OTHER BROWSER.
Click to expand...
Click to collapse
Not true
---------- Post added at 05:04 AM ---------- Previous post was at 05:04 AM ----------
cj28sc said:
So u got this to work with the new sense 6 update or were u on something else
Click to expand...
Click to collapse
He was on 5.5
thayl0 said:
Not true
---------- Post added at 05:04 AM ---------- Previous post was at 05:04 AM ----------
He was on 5.5
Click to expand...
Click to collapse
Yup.. he knows everything.
Man I really miss not being able to root this bad boy on OTA 6 sense my self… waiting patiently for a root method… !!
NO WAY!
Hey Fellas,
I just picked up a HTC One Max on VZW today.
**** LOCKED ****
T6WL PVT SHIP S-ON RH
HBOOT - 2.49.0000
RADIO - 1.36.60.0520
ON SENSE 6
Am I to understand that I am pretty much screwed on root right now?
rafaelvelasquez2 said:
Hey Fellas,
I just picked up a HTC One Max on VZW today.
**** LOCKED ****
T6WL PVT SHIP S-ON RH
HBOOT - 2.49.0000
RADIO - 1.36.60.0520
ON SENSE 6
Am I to understand that I am pretty much screwed on root right now?
Click to expand...
Click to collapse
Nope you are not. Check out Sunshine. It will take will unlock the bootloader and get you S off. You take care of the rest. I was completely stock on the sense 6 OTA when I found out about and used Sunshine. Sunshine does cost $25 to use, but for me, it was worth it.
Sounds promising. Thanks. I'm googling now.
Sent from my HTC6600LVW using XDA Free mobile app
thafrogggg said:
Nope you are not. Check out Sunshine. It will take will unlock the bootloader and get you S off. You take care of the rest. I was completely stock on the sense 6 OTA when I found out about and used Sunshine. Sunshine does cost $25 to use, but for me, it was worth it.
Click to expand...
Click to collapse
Thanks for the advice. I googled SunShine, paid my $25, ran the app and BOOM!!! Unlocked! S-Off! and Root. All I had to do was fastboot flash the unofficial verizon 2.8.0.0 twrp recovery (that confused me for a few hours as well, I was getting errors with the official), install supersu and update the binaries and that was it. I'm chillin on some cyanogenmod now and loving it.
rafaelvelasquez2 said:
Thanks for the advice. I googled SunShine, paid my $25, ran the app and BOOM!!! Unlocked! S-Off! and Root. All I had to do was fastboot flash the unofficial verizon 2.8.0.0 twrp recovery (that confused me for a few hours as well, I was getting errors with the official), install supersu and update the binaries and that was it. I'm chillin on some cyanogenmod now and loving it.
Click to expand...
Click to collapse
Glad it went easy for you. I have not put a custom rom on mine yet. I am considering it, but doing something stupid and borking a phone is not the same as borking a tablet. The tablet can sit until I can figure out what I did wrong. I cant do that with my main line of communications.
waco2hot33 said:
Man I really miss not being able to root this bad boy on OTA 6 sense my self… waiting patiently for a root method… !!
Click to expand...
Click to collapse
Sunshine might work. Google it. You could flash an older rom if your unlocked.
thayl0 said:
Sunshine might work. Google it. You could flash an older rom if your unlocked.
Click to expand...
Click to collapse
Yeah sunshine worked for me I finally broke down and paid for it ..I'm back in business !!!
rafaelvelasquez2 said:
Thanks for the advice. I googled SunShine, paid my $25, ran the app and BOOM!!! Unlocked! S-Off! and Root. All I had to do was fastboot flash the unofficial verizon 2.8.0.0 twrp recovery (that confused me for a few hours as well, I was getting errors with the official), install supersu and update the binaries and that was it. I'm chillin on some cyanogenmod now and loving it.
Click to expand...
Click to collapse
What does it mean to fastboot flash twrp? Im trying to install a custom rom on my verizon one max but idk how to install a custom recovery. My phone is still locked and i have the sunshine app (havent paid the $25 yet) how do i install the custom recovery?
Xx MOE said:
What does it mean to fastboot flash twrp? Im trying to install a custom rom on my verizon one max but idk how to install a custom recovery. My phone is still locked and i have the sunshine app (havent paid the $25 yet) how do i install the custom recovery?
Click to expand...
Click to collapse
You can't flash anything while you are S-ON, bootloader locked, and you can't unlock the bootloader or get S-OFF without Sunshine. Once you are bootloader unlocked and S-OFF, you flash a custom recovery like TWRP so you can gain root and you can (if you choose) flash a custom ROM or other modifications. For the Verizon One Max, Sunshine is the only alternative.
It sounds like you haven't yet looked at other threads here to learn the difference between booting to bootloader, booting to recovery or booting to system, or what S-ON/S-OFF means, or what adb and fastboot are for. You should know all of those things before you wade in and accidentally brick your One Max.
There aren't a lot of devs still working on the device, but there are lots of threads in this forum and elsewhere on xda that will tell you what you need to know. "Search" is your friend.
It sounds like you haven't yet looked at other threads here to learn the difference between booting to bootloader, booting to recovery or booting to system, or what S-ON/S-OFF means, or what adb and fastboot are for. You should know all of those things before you wade in and accidentally brick your One Max.
There aren't a lot of devs still working on the device, but there are lots of threads in this forum and elsewhere on xda that will tell you what you need to know. "Search" is your friend.[/QUOTE]
I have looked at other threads and understand s-off, boot loader on/off, and stuff. What I don't understand, is how to install the custom recovery. I've seen tutorials for how to install custom recovery on the HTC one m7 but none for the one max. I'm not sure if there's a difference. Most of the threads I've seen simply say that I need sunshine, which I have installed on my phone but I'm trying to gather all the information I need on how to install a custom Rom before pulling the trigger and forking out $25.

Categories

Resources