[SIZE=+3]This thread has been created strictly for
Questions & Troubleshooting[/SIZE]
[SIZE=+2]Specific to[/SIZE]
[SIZE=+2]This thread has been created for people to share issues, question and help
while using this version of RageLTE[/SIZE]
RageLTE
PLEASE make sure to thank developer for the dedication to this ROM
Please do not clutter the Development thread with non development-related chatter
Q: How do I set up the V6 Supercharger script?
A: Thanks to drlzanej's Tutorial... I'll attach the files when he PM's them to me
V6Supercharger Tutorial;
Ok guys, Ive done some more testing as far as SuperCharger goes and this is what I'm coming up with. This is just to help you folks out with any issues you may be having, I really like this rom and as far as zepplins mods they speak for themselves if applied properly.
Run SuperCharger script and pay attention to whats going on on the screen. Theres a lot of useful info there, so read along as it runs. any quarys you may have as far as what the script is or what certain mods do you can find the info HERE
After you run the script, Its my recomendation to run"superclean and reboot" (choice 32) as your last option, thats just my opinion.
If you want to patch in the services.jar the one I'm using is attched(or you can get it from zepplins thread found HERE
open terminal emulator an do:
type: su, enter. Leave terminal running.
Copy the new services.jar into your /system/framework folder
Go back to terminal and type: cd /system/framework, enter, chown 0.0 services.jar, enter, chmod 644 services.jar, enter
Reboot. This will take awhile since it will optimize apps the first time.
After reboot, go back to terminal and run the V6SuperCharger script again
and choose to re-supercharge, you will notice that it now says 100% Super Charged....Which I promise it will be. after the script is finished running choose option 32 again, (superclean and reboot). and your done. I know I know it takes a little time but believe me its worth it, Trust me.
If you choose to run a custom Kernel,(which I don't recommend, but, Your choice I don't care) My recommendation would be thicklizards "ArcReactor" works pretty well with this rom. I mentioned in an earlier post some glitchyness but after installing services.jar and running SuperCharger that was gone.
*** AFTER YOU INSTALL YOUR CUSTOM KERNEL, YOU NEED TO RUN SUPERCHARGER AGAIN***, it says it at the beginning of the supercharger script. Just do the re-supercharge thing and your good to go.
Again the services.jar I got from zepplins thread is attached, Just follow the instructions here and your golden. Please don't forget to Thank "zepplinrocks" for the V6SuperCharger AND the modified services script.
Q: I just flashed this ROM, Why do I have no Status Bar?
A: You probably downloaded an older release, re-download the latest 4\25\13 release and you should be good. Remember as always with anything you flash, to check your md5.
Q: This ROM was running really smooth for a day or two and it seems to be getting a little laggy.What do I do to remedy this?
A: Its recommended you run the zepplinrocks V6SuperCharger script through Terminal emulator or Script Manager after you flash to avoid or eliminate this, It will also improve performance and battery life. (***See the V6SuperCharger tutorial above***)
Q: Can I run a custom kernel with this ROM?
A: Its not really necessary to run a custom kernel as the kernel that's baked in performs extremely well, But if you wish to yes you can run any sense based custom kernel. drlzanej has tested thicklizard's Arc Reactor kernel and flar2's Bulletproof Kernel and the both seem to play well with this ROM. ***The S2W(sweep to wake) may cause glitches. To eliminate this issue disable S2W with Kernel Tuner. As always, Any other software you may use with this ROM please hit the Devs Thank you button.
Ill try to help you out here as much as i can bud. Thanks man
*Information IS the most dangerous weapon of all*
drlzanej said:
Ill try to help you out here as much as i can bud. Thanks man
*Information IS the most dangerous weapon of all*
Click to expand...
Click to collapse
Thanks brother
I also noticed that the video graphics in Chess Online still crash like the other ROMs.
... and it's already rolling.
Very nice mate:good:
TonyStark said:
... and it's already rolling.
Very nice mate:good:
Click to expand...
Click to collapse
TY sir
Bigdaddy619, check your pm. ,,,,,,
drlzanej said:
Bigdaddy619, check your pm. ,,,,,,
Click to expand...
Click to collapse
Thanks bro I'll post it when I get home from work
Sent from my HTCONE using xda app-developers app
Cool, pm ke and ill send you the services.jar that go with it to post as well
*Information IS the most dangerous weapon of all*
drlzanej said:
Cool, pm ke and ill send you the services.jar that go with it to post as well
*Information IS the most dangerous weapon of all*
Click to expand...
Click to collapse
Will do :beer:
Sent from my HTCONE using xda app-developers app
Anyone know how to make a system app a user app? Want to make Google play services and play store Greenify-able. Thanks in advance!
Sent from my EVO using xda app-developers app
polar2792 said:
Anyone know how to make a system app a user app? Want to make Google play services and play store Greenify-able. Thanks in advance!
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
I think Titanium Backup may have a feature to convert apps to system apps
Sent you the file and sommore Q&A bud. Have a good one man
Polar2792, if by 'greenify' you mean make the app not launch on boot, ROM toolbox has that feature. Works for user apps and system apps and is very configurable.
Sent from my EVO using xda premium
Been a little activity in the Rage thread so I figured id bump this so people rememberd it was here. Also, zepplins back to work so folks may want to stop by his thread in Original Developement for som more insight. Later,,,:cool,,,
*Information IS the most dangerous weapon of all*
New version of RAGE Rom is out "RAGE-V2, Get it here until utkaar updates th OP. Thanks
md5: https://dl.dropboxusercontent.com/u/32014903/Rage-V2-repaired-md5.txt
RageV2 Rom: https://dl.dropboxusercontent.com/u/32014903/RageLTE-jewel-v2_20130608-repaired.zip
No luck in copying the services.jar..when i copy it on my system/framework folder my phone reboot and stuck to bootanimation..can anyone help me pls..
ronald027 said:
No luck in copying the services.jar..when i copy it on my system/framework folder my phone reboot and stuck to bootanimation..can anyone help me pls..
Click to expand...
Click to collapse
If you're on Ver2 of Rage the services.jar Zep has posted in his thread may not work for you. The one he posted is from an earlier version of Rage so that might be the issue. If you're hell bent and determined you could download Zep's Automagic patcher and patch the services.jar yourself. It'll do most all the work for you and really isn't that difficult to do.
I'm S-On and just tried flashing 1.0.2. I followed the install instructions and flashed it twice. On the second time I flashed it, I didn't receive the "LOOK" message, so I assume that it went through correctly (TWRP said 'Successful'). I wiped the cache and rebooted. But, now I just hang at the HTC loading screen. Any thoughts?
Related
Sorry for posting this here but I am a junior members and I can't post in dev. I already flashed speedy, how do I flash road runner? Do I need to delete all speedy files first or just flash over top?
Id also like to know
Sent from my DROID X2
neckbonest said:
Sorry for posting this here but I am a junior members and I can't post in dev. I already flashed speedy, how do I flash road runner? Do I need to delete all speedy files first or just flash over top?
Click to expand...
Click to collapse
1. Go here and download 0vermind's init.d re-hack
2. Flash the init.d re-hack in BSR (Bootstrap Recovery)
3. Flash Speedy v2 (Road Runner)
4. Reboot twice
To make sure the scripts are working go to /data and check for "ZipAlign log" if you see it, the scripts are working.
Don't be sorry. This section is for general which includes Q&A
Does anyone know if these scripts will work with the atrix ports?
I am a noob and didn't want to start a new thread that would clutter up so this seemed like the best place to ask.
They should work on atrix port but in theory you don't need to flash the init.d hack its already built into atrix port.
rkuhldude77 said:
Does anyone know if these scripts will work with the atrix ports?
I am a noob and didn't want to start a new thread that would clutter up so this seemed like the best place to ask.
Click to expand...
Click to collapse
Yes the scripts are working GREAT with the Atrix port
I install this morning and my phone is working outstanding
7 hours and my phone is still at 80%
the min CPU freq is set @ 250 up from 216
another question...so now that naven updated his scripts do i even need this? Or would it be smart to install this over navens latest release?
rkuhldude77 said:
another question...so now that naven updated his scripts do i even need this? Or would it be smart to install this over navens latest release?
Click to expand...
Click to collapse
It depends which scripts u prefer. They are different in some ways...and u may need to delete parts of conflicting scripts or entire script itself. I saw some people had problems when trying to do that. Just make ur nandroid before trying to be safe.
U could just push the scripts into init.d folder u want to use and fix permission/owners.
So the scripts from these two guys are named differently, does navens have the script that helps battery or can I just add that specific one from overmind into navens zip file?
If so what is the name of the script?
Sorry again I am a noob and am just trying to figure this stuff out
I wanted to say thanks for your interesting work on RoadRunner. I've flashed it, along with the hack, and it wasen't loading as I wasen't seeing Zipalign. log. but realized maybe I should reload busyox, hch I did. Then upon reflashing roadrunner, the zipalign.log appeared. Al started speeding up after this as well as increasing battery life. So thanks again
Steve
v1.8 was a major update.
Please redownload all files and delete old ones.
This is a script I made for myself to put all popular scripts and Patchers in one FILE!!!
I will add scripts on request! This is a Windows/PC batch script using command prompt. This was created on Windows 7 but will work in Windows XP or higher.
Included scripts of November 5:ADB/Fastboot setup for first time users, ADB and Fastboot for already installed users, FTP server for online file storage, ADB and MR. Navigator updater included in options,
Well I decided to share this with you guys.
Please message me if you would like to be a greater!
BUGS: None! well...you tell me
1.8 out..
Working on:
YOU TELL ME]I'm looking to contact a good range of known devs for permission to implement there script or patcher into my AIO (all in one) script.
Support for all devices will be added after fixing some compatibility issues on a good range of devices...... But works perfectly with MT4G tho , a auto installation of ADB wireless if your lazy like me. ACpatcher, ICS status bar layout patcher, and new scripting codes!;
I would respect constructive feedback/criticism because I'm a young mind looking into developing...and such!
Expect v1.9 to come November 10th (Thursday) with BUGFIXES
l]
Download Mr navigator with v1.8 and all needed setup files here (Must have to run)- http://www.mediafire.com/?xy4cl7655m3xu03
If you just want to download v1.8 update because your coming from an older version, here-- Major update (re download all files)
(You need actual Mr navigator to run, but if u just wish to update mr navigator you can just download this then look at my how to update guide below MAJOR UPDATE REDOWNLOAD ALL FILES
How to update: Mr navigator v1.9 will be named "update.bat"
Don't open it just move it to the same folder as Mr navigator.bat Then open Mr. navigator and go to options/updater. Then it will detect the update and ask if you want to apply it
Which scripts are you speaking of exactly?
Sent from my Xoom using xda premium
Jaytex24 said:
Which scripts are you speaking of exactly?
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
maybe splash script flasher by trueblue_Drew, adb easy installation (WIP) by me, revolutionary auto root, ics status bar layouts fix for cm7, and any other requests
cool
I was stuck on a problem but I figured it out so i coughed out 1.5 a day early!! All I need are TESTERS!!!! plz....lol
Jaytex24 said:
Which scripts are you speaking of exactly?
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
Yea I don't understand what these are supposed to do...?
xmc wildchild22 said:
This is a script I made for myself to put all popular scripts in one FILE!!!
I will add scripts on request!
Well I decided to share this with you guys.
Please message me if you would like to be a tester!
BUGS: None! well...you tell me
1.5 out..(MAJOR PROBLEM FIXED)
Working on:
I'm looking to contact TrueBlue_Drew for his permission to implement his script into mine.
Support for all devices will be added after fixing some compatibility issues on a good range of devices......
works fine with MT4G tho
I would respect constructive feedback/criticism because I'm a young mind looking into developing...and such!
download 1.5 here...
(EXPECT NIGHTLIES UNTIL A WEEK AFTER STABLE RELEASE)
http://www.mediafire.com/?xy4cl7655m3xu03
Click to expand...
Click to collapse
it would be nice to know exactly what your scripts are suposed to do to our phones... no details makes ppl not want to flash things... just sayin...
irrelephant said:
it would be nice to know exactly what your scripts are suposed to do to our phones... no details makes ppl not want to flash things... just sayin...
Click to expand...
Click to collapse
True, sorry this is one of my first threads
Advice:
Search "Scripts" here on XDA and youll find lots of results. The most popular ones that I kow of so far are the V6, Darktremor, and Juwe(?) Ram Scripts. A good starting point would be to start an official "Scripts" thread and provide links to each popular script devs forum thread. Ask the devs permission if you can link direct download links to their script so you can track which ones are more popular with users and then collaborate with the devs themselves on making a batch script .zip file that contains multiple scripts for different functions (RAM mods, partitioning mods, etc). Script manager is a useful app, but I would rather all scripts be flashable through cwm. If you really push yourself on this project I really think you could gain a good following among fellow XDA users. Good luck
although I would prefer using windows batch scripts because then I could use adb help and I'm familiar with most commands. I still have alot to Learn about making update.zip which can be flagged in recovery...so for know, I'll stick with what I already know. but I might look in to what you suggested and I've already started private message some people. :-]
1.6
here you go (v1.6)
I decided that since enough people asked about it, then it probably deserves it's own thread. This thread contains information on how to set up the V6 super charger script on the galaxy note.
**PLEASE FOLLOW ALL INSTRUCTIONS TO ENSURE SUCCESSFUL INSTALLATION/OPERATION OF SCRIPT**
CREDITS:
**ZeppelinRox** Creator of V6 and many great scripts!
WHAT YOU WILL NEED:
A. Rooted phone (duh)
B. Busybox 1.81.1 DOWNLOAD Via GOOGLE PLAY app - **BUSYBOX INSTALLER** https://play.google.com/store/apps/d...N0YWxsZXIiXQ.. (Thanks Capite for the link)
C. (optional) Root Explorer (to mount /system to r/w) can use script manager too
D. V6 supercharger PDF file... which is linked below
*****ICE CREAM SANDWICH USERS**** don't forget to first supercharge your SERVICES.JAR via website....http://android.mimic.ca**********
Flash in Clockwork...... Cache Wipe X2 - Wipe Dalvik - Flash Zip.
Installation Instructions:
Please follow ZEPPELINROX thread here: http://forum.xda-developers.com/showthread.php?t=991276 -
Per his request, i will not create installation instructions...... But if you have questions i will try to help you out since i have used it forever.
________________________ zOOm zOOm _______________________________________
*
*
*
*
SCRIPTS
MOST SCRIPTS CAN BE FOUND HERE: http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Hey just a quick heads up...zeppelin is very clear in his thread that he does not want those files posted up in other threads and to link back to his thread. Did you talk to him about creating this thread?
Sent from my SAMSUNG-SGH-I717 using XDA App
00mred00 said:
Hey just a quick heads up...zeppelin is very clear in his thread that he does not want those files posted up in other threads and to link back to his thread. Did you talk to him about creating this thread?
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
hmm... no i didn't read up .. i'll check it out and delete if that's the case. i been helping a lot of ppl install because they cannot - def. not taking credit for his work.
edit: he says not to duplicate his install instructions, but he is okay with sharing. so i guess i'll just share and help with questions.
Its not so much that but by going to the original thread it ensures the user gets the most up to date script. The how to is an excellent idea but some of your steps conflict his steps
Another note....#5 suggests we get a paid app via warez....that I know is against the rules you might remove that
BigBison420 said:
hmm... no i didn't read up .. i'll check it out and delete if that's the case. i been helping a lot of ppl install because they cannot - def. not taking credit for his work.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using XDA App
well, i believe it's a free app... or maybe i meant "file explorer" i forget. but my market is jacked up because of a ROM issue. (can't access market)
00mred00 said:
Its not so much that but by going to the original thread it ensures the user gets the most up to date script. The how to is an excellent idea but some of your steps conflict his steps
Another note....#5 suggests we get a paid app via warez....that I know is against the rules you might remove that
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
Hi,
Since RC7 does not work.
What version should be used?
V6_SuperCharger_for_Android-Update9_RC6.9.sh.pdf ?
Thanks
Is anyone else really confused about the options in the script and what each one brings? I'm sitting looking at a menu, unsure what to pick :/
BigBison420 said:
ATTACHMENTS - updates/scripts FROM **ZeppelinRox**
**removed attachement update9_RC7 because it was not working on my Gnote**
MOST SCRIPTS CAN BE FOUND HERE: http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Click to expand...
Click to collapse
What's wrong with RC7? I installed it successfully on my phone, and it runs. Can't tell much of a difference though.
Is there something specific installation error that you are running into, or do you have a way to check if the script is running correctly? If I try to run /data/99Supercharger.sh again, it tells me the my phone is already supercharged and to verify that "Ran_Supercharger" exists in /data, which it does.
After installing Balance 3, I see no difference in the Go Launcher. LauncherPro is better than ever, and my battery life is now really good.
So... it sort of worked.
re
hey guys,
well i'm just trying to help galaxy note users out (apparently a lot of you are new to this scripting thing).
what personally works for me i recommend. That would be option 13 (bulletproof launcher) and also 768+hp settings.
keilbaca said:
After installing Balance 3, I see no difference in the Go Launcher. LauncherPro is better than ever, and my battery life is now really good.
So... it sort of worked.
Click to expand...
Click to collapse
I use go launcher and the new 2.85 Beta is available. There is a noticable increase in optimization. Lag has lessened a bit. and i'm running SauROM with Da_G's OC kernel.
BigBison420 said:
I use go launcher and the new 2.85 Beta is available. There is a noticable increase in optimization. Lag has lessened a bit. and i'm running SauROM with Da_G's OC kernel.
Click to expand...
Click to collapse
I got the latest script to run on my Note, on stock.
I seen no difference at all.
I'm throwing SauROM on it tonight, because I am having other issues too that the rom should fix, I hope. Citrix wants to auto delete the first thing it sees in Active Directory. I don't think my work would appreciate me if I deleted the entire Servers column in AD.
I would love to install this. But.your instructions differ greatly..you suggest a busting install along withal file explorer install.. He suggests script manager.
And there is some question as to which pdt we should be using.
I have a seperate thread with his install instructions linked. I referenced file explorer because i didn't realize u could mount rw. If your THAT confused u should probably not install it.
Sent from my SAMSUNG-SGH-I717 using XDA
In not confused. To the contrary, i understand almost wholly. But what isnt clear, is whether his instructions are sufficient or that they work with out note.
Its not clear which version of the script we need...or which set of instructions we should use.
Listing a set of instructions in a note specific forum (ones that differ from those elsewhere) implies that the others wont work on our device....or that something could be easier or go wrong.
Thank you for pointig the supercharger mod out. I was unaware of it. With that said, id still like to install it.
Which PDF do we use?
Jamesyboy said:
In not confused. To the contrary, i understand almost wholly. But what isnt clear, is whether his instructions are sufficient or that they work with out note.
Its not clear which version of the script we need...or which set of instructions we should use.
Listing a set of instructions in a note specific forum (ones that differ from those elsewhere) implies that the others wont work on our device....or that something could be easier or go wrong.
Thank you for pointig the supercharger mod out. I was unaware of it. With that said, id still like to install it.
Which PDF do we use?
Click to expand...
Click to collapse
i got u completely - i just listed my walkthrough because some people truly need step by step instructions lol. but the DEV's instructions are plenty IMO
my thread was designed to link instuctions for setup and also discuss which scripts are working for the Gnote (case and point, my experience with update 9RC7 which isn't working for me, but does for another user). for me update 9rc6 works fine.... i would try RC7 too - lot of nice features
keilbaca said:
After installing Balance 3, I see no difference in the Go Launcher. LauncherPro is better than ever, and my battery life is now really good.
So... it sort of worked.
Click to expand...
Click to collapse
IN GoLauncher ---> make sure you set icons to "Default Size" because using LARGE or CUSTOM is one of the main Culprits to lag.... also get the 2.85 version
I have no lag.
Anyone tried this on the ICS leak builds?
Super charger us the best mod to improve speeded etc. however this is my second phone that after super charging my phone doesn't shut down all the way. If i power off then plug it in., it reboots. Also wifi constantly looses data connection. Both issues are related to one of the supercharger tweaks just not sure which one is causing it. Maybe home bullet proof.
Sent from my SAMSUNG-SGH-I717 using xda premium
First, thanks to tommytomatoe for creating the awesome dexo script! I have only automated the process. For more info on the dexo script check TT's thread here.
Also, thanks to volk9029 for all the ROM testing, he tested a majority of the ROMs.
In theory, this script will re-odex any completely deodexed ROM, BUT it depends on the modifications the dev has done to their ROM. ie..if framework.jar is missing "preloaded-classes", the script will abort. preloaded-classes is needed for odex ROMs to boot.
Each of the ROMs listed below as "incompatible" have "preloaded-classes" missing from /system/framework/framework.jar. Each of these ROMs would be compatible if framework.jar is modded correctly. For more info see post # 8
Requirements:
-You need to have the HTC usb drivers installed. If you have HTC Sync installed, you're good to go.
-You need to have usb debugging enabled on your phone. Settings, Dev options, usb debugging.
-I recommend doing a backup before running this script (just in case)
Install:
-Extract zip to pc
-Phone must be booted
-connect phone to pc
-run "Odex my ROM.bat"
The script only takes a few minutes, your phone will appear frozen during the process. When the script is done, your phone will reboot.
DOWNLOAD
Compatible ROMs:
-OMJ's
-Superjelly
-meanbean 3.01
-Viper's ROM 3.10
-Hatka LTE ROM
-Digital Bath ROM
-Micromax A75
-Red Line ROM by billbowers
Incompatible ROMs:
-Flex's Stock w/ Goodies
-Tranquility ROM
-Timberwolf671 ROM
These are the only ROMs tested, if you use this script on another ROM, please post your results & I'll update the list.
reserved
Thanks for sharing man!!!!!
Sent from my EVO using xda premium
Awesome job. Thank you.
Sent from my lair.
Thanks so much for this. I just odexed the new HatkaLTE ROM and it's running great! I had read TT's thread but was a little intimidated by it. Great job automating this!
This works perfect! Thanks
This its awesome. Great idea. I knew tommy had made the script, and now you have automated it. Nice work from both of you. Thanks. Any reversal method being designed yet? I suppose do a nandroid before using the script would be best.
Sent from my EVO using xda app-developers app
some good info from TT about the preloaded-classes issue...
tommytomatoe said:
Good stuff To bring a little more clarification as to why those rams are in the incompatible list.
"Preloaded-classes gets accidentally compiled into classes.dex by sloppy devs
Framework.jar should only be modified using baksmali and smali, never apktool or any other tool.
The bad framework.jar, its classes.dex contains the code and instructions for preloaded-classes already. So when you odex, framework.odex contains preloaded-classes and classes.dex codes - which causes the system not to boot. Odex files should only contain classes.dex code.
How to resolve? Take a fresh framework.jar and baksmali it. Edit it. Then smali. This will ensure preloaded-classes were untouched, as baksmali is smart enough to leave it alone.
Another alternative is to pull classes.dex from fresh framework.jar and baksmali it. Smali when finished and insert back into jar file.
Then, when you odex, framework.jar will contain only preloaded-classes and framework.odex is the optimized classes.dex. "
Of course, autogeeks suggestion works but that is not ideal for the obvious reasons. Mods done to framework.jar would no longer be available, all dependencies on those mods would of course be broken.
...then again, I haven't touched android in a long long time. What do I know
Click to expand...
Click to collapse
Thanks bro.
TT is the man too.
Just executed this script. Flawless. Thank you
Sent from my EVO using xda app-developers app
Thanks for this Script i made my ROM Odexed but few of my app are not working properly may be the problem of the app as there are only few apps like Root Browser opening but not working properly giving forceclose after few clicks when i try to open system it just doesnt open and when i close the app and again try to open system it opens and when i click on app it gives forceclose, Zeam Launcher not showing dock but other then this all are working fine so thanks for the script will try to change the apps which are not working and then check if i still get the problem i think i wont and now i think that i can release my first custom ROM as i was waiting for this Odex script so that i can release the first ROM of mine in Odex version although its a ROM from another developer but i moded it and made compatible with my device thats MICROMAX A75 so will test it fully and once confirmed everything working perfectly then will release it so just wanted to know if i can release the ROM with Odexed version made by your script i will add proper credits in the credit section if you permit me to go ahead. will be waiting for your permission. Once again thanks for your script yaar its just awesome.
shahabazas said:
Thanks for this Script i made my ROM Odexed but few of my app are not working properly may be the problem of the app as there are only few apps like Root Browser opening but not working properly giving forceclose after few clicks when i try to open system it just doesnt open and when i close the app and again try to open system it opens and when i click on app it gives forceclose, Zeam Launcher not showing dock but other then this all are working fine so thanks for the script will try to change the apps which are not working and then check if i still get the problem i think i wont and now i think that i can release my first custom ROM as i was waiting for this Odex script so that i can release the first ROM of mine in Odex version although its a ROM from another developer but i moded it and made compatible with my device thats MICROMAX A75 so will test it fully and once confirmed everything working perfectly then will release it so just wanted to know if i can release the ROM with Odexed version made by your script i will add proper credits in the credit section if you permit me to go ahead. will be waiting for your permission. Once again thanks for your script yaar its just awesome.
Click to expand...
Click to collapse
no permission needed, anyone is free is use this script for whatever.....
"Odex any ROM"
"List of incompatible ROMs:"
Lol ^ made me laugh
Hey u can add Micromax A75 in the compatible list as i have tried this script on it and its working totally fine no problem at all.
Thanks for this amazing script yaar i was looking for it since past 6months.
shahabazas said:
Hey u can add Micromax A75 in the compatible list as i have tried this script on it and its working totally fine no problem at all.
Thanks for this amazing script yaar i was looking for it since past 6months.
Click to expand...
Click to collapse
Whats wrong with using titanium backup to odex?
youdug said:
Whats wrong with using titanium backup to odex?
Click to expand...
Click to collapse
As titanium backup doesnt odex the framework folder it only odex the apps folder.
shahabazas said:
As titanium backup doesnt odex the framework folder it only odex the apps folder.
Click to expand...
Click to collapse
Did not know that. Never checked. +1 to you sir.
Does this work on aosp rom? I see the list of compatible and incompatible ROMs. Just didn't see if it says sense only. Thanks
I would actually assume not. But i had to ask to see if ianyone has tried
Sent from my Nexus 7 using xda app-developers app
treIII said:
Does this work on aosp rom? I see the list of compatible and incompatible ROMs. Just didn't see if it says sense only. Thanks
I would actually assume not. But i had to ask to see if ianyone has tried
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure.....all the script does is odex all the deodexed apks in /system/app & /system/framework, and this script is not specific to HTC....you could be the guinea pig
do a full backup & give it a try! worst case u restore your backup
O.M.J said:
I'm not sure.....all the script does is odex all the deodexed apks in /system/app & /system/framework, and this script is not specific to HTC....you could be the guinea pig
do a full backup & give it a try! worst case u restore your backup
Click to expand...
Click to collapse
Right now. Report back in a few
Sent from my Nexus 7 using xda app-developers app
---------- Post added at 10:08 AM ---------- Previous post was at 09:49 AM ----------
treIII said:
Right now. Report back in a few
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I tried. USB debugging enabled. Computer noticed phone immediately and HTC sync popped up so that didnt seem to be the problem. When i tried the odex my rom bat script and it says press any key to continue nothing happened other than the cursor in the command prompt dropping down a line.
Sent from my Nexus 7 using xda app-developers app
---------- Post added at 10:13 AM ---------- Previous post was at 10:08 AM ----------
I just used titanium backup to odex system apps. It had no problem doing that. I know that doesn't involve framework though. If you have any suggestions on anything i might try to get the script to work let me know
Sent from my Nexus 7 using xda app-developers app
======================================================================
[WHAT'S NEW?] FINAL 4.2.2 build feature notes...
10.1.5 comes with HALO.
10.1.6 comes without HALO.
======================================================================
[DOWNLOAD]
CM10.1.5 http://jenkins.androidarmv6.org/job/android/575/ (I don't own a copy of 10.1.5 since I had no need of HALO,
if anyone has a copy - contact me)
CM10.1.6 DOWNLOAD
Note: Google apps are NOT included - download from HERE THESE or use this MIRROR.
======================================================================
[Known bugs]
#1.Can't check Auto-Brightness in Settings->Display->Brightness?
==>>Pull down the Quick Settings Panel on Status Bar, choose Brightness and check Auto-Brightness from there.
#2. Wifi teather not working? [Fixed since CM 10.1.3]
==>>Search "wifi teather" on Play Store, users reported that "Wifi Teather Root" works. If anyone deers to confirm ill update this.
#3. Wifi don't reconnect after deep sleep (or 10min of inactivity)? [Fixed after July builds]
==>>A xda member, @soulreaver1 was frustrated of the same issue, so made an app that fixes it, visit it HERE where you will find the playstore link. It takes only a few seconds to thank him !
#4. BOOTLOOP after flashing SD-Ext script?
===>>Your SD-Card is not partitioned like it's supposed to caused by unknown bugs likely by Clockwork Recovery and u need to repartition it your SD-Card...So far I can only recommend Amon Ra, since I did it trough it and got the SD-EXT Tweaks working.
[Tips & TRICKS]:
==>>There are so many scripts on xda to boost your performance, wondering which to choose?
#Well It's best for you to try them all and see which one suits you best but if you wish to save some time click HERE , I personally use "Operation Killjoy" myself.
(CrossBreeder is another tweak, mentioned since it's compatible with Killjoy,
If you wish to combine it I suggest you to flash one at a time, boot your device after first flash and let it stabilize about a minute or 2, then flash CrossBreeder).
Flashing both at the same time caused great delay and system misbehaving, whats it gonna be it's up to you.
Others scripts I tried are Adrenaline Engine and Pure Performance and Fly-On(I believe was the name).
Know a better one then all above? Feel free to share it with us.
Credits on Operation Killjoy script goes to @Exit_Only.
==>>Flashed but no gapps?
#Since you're flashing experimental build, use THESE 4.2.2 Gapps or this MIRROR
Thanks to @rr0yy!
==>>Developer and Performance options missing??
#Enable performance and developer options with x7 times clicking on Settings->About->Build Date.
==>>Looking for data2ext solution?
#Here's the Thread link and...
==>>The Tutorial !
(Note: A partitioned SD card is required, otherwise skip this and partition it first.)
#1.After done with flashing ROM, flash the sd-to-ext* script.
#2.You must boot phone at least once before you can flash the second script. So, boot ROM and after 2 min are passed and system stabilized, reboot in recovery.
#3.Now flash the second to-sd-to-ext* script.(it should take about 2min to complete.)
#4.PROFIT! You got extra internal space! Get downloading cool new apps
(Oh, wait, If you get any error or stuck on "mounting sd-ext" or "unmounting sd-ext" do this:
Go into Mounts and Storage and try to mount /sd-ext. If you get Error Mounting then your SD Card is not partitioned well and I recommend you to flash Amon Ra Recovery and partition your SD Card from there. I had the same issue because of Clockwork buggs as already mentioned )
You just had to do it, huh?
Sent from my LG-P500 using xda premium
you macedonian nut
isn't the general thread and the other thread on the original works enough? D:
Sent from my LG-P500 using xda app-developers app
Left4DeadMW said:
A link from Jenkins Builds since many users of our O1_p500 didn't know about it and I personally can't find it here in the " LG Optimus One, P500, V"...
==> http://jenkins.androidarmv6.org/ <==
(latest p500 build for lazy ppl -> http://jenkins.androidarmv6.org/job/android-experimental/10/ )
(i did NOT developed this, although those are jenkins original developed builds,I do believe that someone should've made a thread for it here on xda, some of us p500 users use it daily and we can exchange some info's about it or simple help each other out...If YOU moderator look at this as something "wrong" simple transfer in "General" or Delete it.)
Cheers..
Click to expand...
Click to collapse
Where is the Developer Settings in this rom?
I couldn't seem to find it anywhere. Some help please
Thanks
settings>about phone>tap build number 8 times and the settings will appear (it will tell you "you are now a developer", just hit back and the development options will be there along with the performance settings)
Sent from my LG-P500 using xda app-developers app
LeftForDeadMW ... this is repatative bro ... but as u have already made the thread utilization will be best if you can put up latest jenkins build changelogs ..
/\ |\| /\ |< |\| | |\|
pls hit thanks to show gratitude fr help
:: peace
Sent from Legendary Pandoras Box unlocked with my Rooted LG P500 Optimus One ...
I put it in "Original Development" since it's original and it's most likely for people to find it here then in General trough..
I wanted first to see you people will show some interest in this then put some detailed information about it...
(Or if you disagree with my opinion PM Moderator and you will save me some time )
Will do the "thread makeup" when i get back home. :good:
Sent from my LG-P500 using xda premium
dnle71 said:
You just had to do it, huh?
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yes :evilsmile:
Sent from my LG-P500 using xda premium
729 mhz- 320mhz smartass
Great smoothness....no lag ...no hang..
I am running April's build
Sent from my LG-P500 using xda premium
The latest build is named RC1..! really good for daily use...
Yeah I feel this thread was needed..
aravindsagar said:
The latest build is named RC1..! really good for daily use...
Yeah I feel this thread was needed..
Click to expand...
Click to collapse
How is battery with 3g, Wi-Fi usage?
Depends fairly on usage, freqencies, apps, traffic and so on
Sent from my GT-P1000 using xda app-developers app
nomancoolboy said:
729 mhz- 320mhz smartass
Great smoothness....no lag ...no hang..
I am running April's build
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
I checked everything for changed since April's build till now...
Noting found -_-
All i can post for now is cm10-cm10.1 changelog since I found it in "about"
If someone could provide me with some clues where can i find it then great, till then [empty].
renzetti.s said:
How is battery with 3g, Wi-Fi usage?
Click to expand...
Click to collapse
Bad..very bad...
I don't know exactly for 3G but i can confirm that battery drain with on Wifi is huge...about -10% for like 10-15min on Wifi..
(played with my bro yesterday: wifi+game = from 20%->4% in 6-7min -_- )
Otherwise you get about 10hours battery with using phone not so much...
(-30% of time into Airplane mode)
(-No 3G, Wifi, Bluetooth..)
(-Greenify used to make sure no app runs in background.)
Playing games often turns your phone to "hand heater" and wastes your battery so quicky..(i reboot and remove the battery about 2min to cool off..)
If there is anything that should be fixed next, it's battery drain for sure..
Int2Ext/Data2ext
Anyone got some kind of INT2EXT or Data2Ext Script to work on this?
No more builds after 06052013?
Left4DeadMW said:
Anyone got some kind of INT2EXT or Data2Ext Script to work on this?
Click to expand...
Click to collapse
@Left4DeadMW - Link2sd is working fine.
But suddenly Jenkins stops building from yesterday.The last build dated 06052013 but since then it stops.Anybody knows whats d matter?
sumansur2008 said:
@Left4DeadMW - Link2sd is working fine.
But suddenly Jenkins stops building from yesterday.The last build dated 06052013 but since then it stops.Anybody knows whats d matter?
Click to expand...
Click to collapse
The builds are executed with the help of a timer.
Next executions
Timer-Weekly 11/05/2013 02:08
so, the next build will be executed tomorrow.
Left4DeadMW said:
Anyone got some kind of INT2EXT or Data2Ext Script to work on this?
Click to expand...
Click to collapse
I managed to get INT2EXT working with the latest RC1, it was simply a matter of trimming the ROM to give you more free space in your system partition. You may also need to mount /system in your recovery before flashing the script in order to get it to work.
----------
Sent from the moon.
And about jenkins changelog?
Did anyone found something specifically rather then "changes.txt" on build website?
Sent from my LG-P500 using xda premium