3.x Kernel Release Thread
As usual, it's all at your own risks incl. eventual bugs, etc. Please wipe before flashing.
3.0.8-nAa-03 @a3f2ebe1e2 (may 04)
http://d-h.st/FtA
CM10 only - WiFi not packed
3.0.8-nAa-02+ @ba89a11b98 (apr 27)
http://d-h.st/peH
Apparently this works only on CM10, NOT CM9 and NOT CM10.1 (it uses nAa's ramdisk)
Nice bro .. i will test it Now wirh CM10.1 Mike build
Edit: nAa logo flicker and then black screen and stuck on it .. i'm on Mike build 24/4/2013 .. recovery working good
mido_fedo said:
Edit: nAa logo flicker and then black screen and stuck on it .. i'm on Mike build 24/4/2013 .. recovery working good
Click to expand...
Click to collapse
Thanks for the report so it's not the ROM... I really need to figure what's causing this since I'm just using the mainline tree right now... thank you!
It boots fine on cm10 but Wifi doesn't work do you have modules.
adridu59 is it work ot CM9?Do you try the kernel and where is the download link?
Spellbound_91 said:
adridu59 is it work ot CM9?Do you try the kernel and where is the download link?
Click to expand...
Click to collapse
Link back online.
So... for some of you it works and others get black screen like me... that's weird. Got black screen on CM9.1 personally.
EDIT: wifi firmware is here
http://forum.xda-developers.com/showpost.php?p=40581766&postcount=2
but it should be in the ramdisk (nAa's)...
adridu59 said:
Link back online.
So... for some of you it works and others get black screen like me... that's weird. Got black screen on CM9.1 personally.
Click to expand...
Click to collapse
OK,now I'll flash CM9 and report to you!
adridu59 said:
Link back online.
So... for some of you it works and others get black screen like me... that's weird. Got black screen on CM9.1 personally.
EDIT: wifi firmware is here
http://forum.xda-developers.com/showpost.php?p=40581766&postcount=2
but it should be in the ramdisk (nAa's)...
Click to expand...
Click to collapse
i think it's same problem happedn with kernel for hadia on nAa thread
working on CM10 but not working on CM10.1
is this kernel works in wt19i ( sony live with walkman ) ?
[FONT="Arial ="5"]
• Sony Live with Walkman
mido_fedo said:
i think it's same problem happedn with kernel for hadia on nAa thread
working on CM10 but not working on CM10.1
Click to expand...
Click to collapse
Wird but Mike includes nAa's kernel in his builds doesn't he?
airjyp said:
is this kernel works in wt19i ( sony live with walkman ) ?
[FONT="Arial ="5"]
• Sony Live with Walkman
Click to expand...
Click to collapse
I don't think so, it's compiled for hallon (MT15i), should work on MT11i too
adridu59 said:
Link back online.
So... for some of you it works and others get black screen like me... that's weird. Got black screen on CM9.1 personally.
EDIT: wifi firmware is here
http://forum.xda-developers.com/showpost.php?p=40581766&postcount=2
but it should be in the ramdisk (nAa's)...
Click to expand...
Click to collapse
NAa's ramdisc is for cm10 for cm9 and cm10.1 you who'd need appropriate ramdisc
adridu59 said:
Wird but Mike includes nAa's kernel in his builds doesn't he?
I don't think so, it's compiled for hallon (MT15i), should work on MT11i too
Click to expand...
Click to collapse
yes Mike includes nAa's kernel in his builds but kernel include in last build (24/4) he upload it not work and then he upload new kernel (Test 2) and this test working now and i think Mike edit something on kernel to work on CM10.1
adridu59 said:
Wird but Mike includes nAa's kernel in his builds doesn't he?
I don't think so, it's compiled for hallon (MT15i), should work on MT11i too
Click to expand...
Click to collapse
ok thanks i will try it
[FONT="Arial ="5"]
• Sony Live with Walkman
Tenacius D said:
NAa's ramdisc is for cm10 for cm9 and cm10.1 you who'd need appropriate ramdisc
Click to expand...
Click to collapse
mido_fedo said:
yes Mike includes nAa's kernel in his builds but kernel include in last build (24/4) he upload it not work and then he upload new kernel (Test 2) and this test working now and i think Mike edit something on kernel to work on CM10.1
Click to expand...
Click to collapse
Thanks guys. I don't have much time these days but I'll look into it later
My XN (Hallon) booted into system on CM10 (4.1.2) fxp 216
Spellbound_91 said:
My XN (Hallon) booted into system on CM10 (4.1.2) fxp 216
Click to expand...
Click to collapse
So that confirms what Tenacius said...
It looks like nAa uses different ramdisks for different Android versions:
https://github.com/adridu59/ramdisk-3.0.x-nAa/commit/4833ba657b924caed9aff7af1389612c3ffca191
See archive files 4.0 4.1 4.2
hi please make this kernel for neo L users
Video recording, BT and fm radio works? where are wifi modules?
Now, I test:
Video recording - fron an back cameras - Work
BT - I just terned on and it work
Front and back cameras-work
FM radio - when I turned on my phone stuck and FM FC
The sound from Speaker is low.
Related
Before you post Noob questions like
-How to root
-Can i flash this on locked bootloader
and stuff
Head over HERE
[TUT][NEO V ] Flashing, Rooting, ADB drivers, ClockWork-Mod Installation
After you Root, Install CWM,and unlock your bootloader, only then will you be able to use these ROMS or Kernels
Kernels LIST
1)Inteks Kernel Clean OC V15
This kernels can be flashed on firmware 4.0.2.A.0.42 afaik
I tried this on .238 and it did work for me though
This Kernel enables you to Overclock your device to a maximum of 1.8Ghz
Overclocking to the maximum *WILL* fry your device
You have been warned
Download from HERE
LINK
Credits go to : Inteks
Do thank him in the above thread
Click to expand...
Click to collapse
Click to expand...
Click to collapse
ROMS
1) MIUI
A)MIUI 1.12.16 Rom For SE Xperia Neo
Download LINKS
ROM
KERNEL
The above Kernel cann be overclocked - 122Mhz-1600Mhz
Once you have flashed the Kernel and installed the ROM
Please use THIS camera Fix t
o fix your Neo V's broken Camera
I have myself tested the Above ROM and Kernel on my Neo V and it works fine
ORIGINAL THREAD
B) MIUI 1.12.9 -ripped Desire HD
Download LINKS
ROM
KERNEL
The above kernel is NON OVERCLOCKABLE !
ORIGINAL THREAD
Thanks to taaviu for his hard work on the above mentioned ROMS
And JasonStein for his provided Kernels
Click to expand...
Click to collapse
Click to expand...
Click to collapse
2) Ice Cream Sandwich ALPHA ROM
This ROM and Kernel comes from the guys at HTCMania
Original HTCMania Link
Download LINKS
ROM V0.4
Kernel
ORIGINAL THREAD XDA
ORIGINAL THREAD HTCMANIA
Credits:
Marc0sgb
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I do NOT take credits for any of the above mentioned ROMS or Kernels
I have only compiled them in one thread for easy reference
For more MODS AND ROMS CHECK OUT Vimjams thread over here
[#1][neo v] all in one thread
Hi you can add this kernel, please?
[email protected] OC 1.6 ghz
Original link
Code:
http://forum.xda-developers.com/showthread.php?t=1385471
Dowload link
Code:
http://www.mediafire.com/?aju9dxqzdd7uetb
I can also confirm, that DooMKerneL for Neo is working on my Neo V, stable at 2GHz
I also tried NEO SE.TWEAKED V7, and CyanogenMod7 for Neo, both are 100% working except for the camera. I got camera partialy working on CM7 with MIUI fix (front camera is working in 100%, rear camera only takes upside-down pictures, but it can't record videos) . Here I'e posted, how to flash CM7 on Neo V -> http://forum.xda-developers.com/showpost.php?p=20311081&postcount=185
You can add this info to the first post, so other people could enjoy other ROMs than MIUI
thedr0idboy said:
Hi you can add this kernel, please?
2.6.39-[email protected] OC 1.6 ghz
Original link
Code:
http://forum.xda-developers.com/showthread.php?t=1385471
Dowload link
Code:
http://www.mediafire.com/?aju9dxqzdd7uetb
Click to expand...
Click to collapse
Oh nice I shall add that too
It works on stock and MIUI ?
Wicia said:
I can also confirm, that DooMKerneL for Neo is working on my Neo V, stable at 2GHz
I also tried NEO SE.TWEAKED V7, and CyanogenMod7 for Neo, both are 100% working except for the camera. I got camera partialy working on CM7 with MIUI fix (front camera is working in 100%, rear camera only takes upside-down pictures, but it can't record videos) . Here I'e posted, how to flash CM7 on Neo V -> http://forum.xda-developers.com/showpost.php?p=20311081&postcount=185
You can add this info to the first post, so other people could enjoy other ROMs than MIUI
Click to expand...
Click to collapse
Nice I shall add all of the above
Am a little busy atm ~Christmas eve ~ yay
Will add soon
And feel free to give suggestions
Wicia I contacted to FXP and seems that have not problems to modify this version for our device.
The build.pro is original of SEandroid repo? because in that case, on instalation proccess there was a problem that should be fixed.
I have fixed this error, and now all it,s ok. It,s recommended to change MT15 for MT11.
Also, camera files included in the patch have been replaced for works fine.
Download Link
Code:
http://sourceforge.net/projects/seandroid/files/xperianeov/Roms/BOOTLOADERUNLOCK/GINGERBREAD/CYANOGENMOD/SECM7.zip/download
Only need install this from recovery
Qwerty123 \m/
[email protected] OC 1.6 ghz onli work in miuis roms
Only video recording with rear camera isn't working on my Neo V, but everything else is OK
OK i will give it a try ....
By the way great news ......... to hack Neo v MT11i using unlocked loader
i used the first rom and kernel in the list ! works fine ! but can anyone tell me how to use the camera fix ?
pratheek.reddy said:
i used the first rom and kernel in the list ! works fine ! but can anyone tell me how to use the camera fix ?
Click to expand...
Click to collapse
Flash via recovery like you flashed rom
Sent from my MT15i
Hi, this is my first contribution to the great Custom Rom.
This is the solution to slow accelerometer CM9 and other rom.
Flash should only the attachment
Restart the device.
And ready have the full working accelerometer for games and all.
TESTED IN XPERIA MINI PRO, REPORT ANY FAILURE, to fix it. :angel:
Fix_Acelerometer_MiniPro_Link
Fix_Acelerometer_LWW_Link
Fix_Acelerometer_Active_Link
Fix_Acelerometer_Mini_Link
Special thanks to Kamarush.
Reserved
Reserved
cool thanks, works 100%.
Anybody tested on ics wt19i?
Gesendet von meinem WT19i mit Tapatalk 2
motorazrv3 said:
Anybody tested on ics wt19i?
Gesendet von meinem WT19i mit Tapatalk 2
Click to expand...
Click to collapse
test and report, contribute to this post.
404 when trying to download it.
Czarnodziej said:
404 when trying to download it.
Click to expand...
Click to collapse
link fixed.
So, you readed my post in Eternity thread...
Hello
Have you compiled it yourself?
Of are they the original files from 4.1.B.0.431?
As far as I can see, it is only the files in the lib dir that differ from what is in CM9 FXP.
hnl_dk said:
Hello
Have you compiled it yourself?
Of are they the original files from 4.1.B.0.431?
As far as I can see, it is only the files in the lib dir that differ from what is in CM9 FXP.
Click to expand...
Click to collapse
if correct. so do not understand why the FXP not resolved. est is due to kamarush
kamarush said:
So, you readed my post in Eternity thread...
Click to expand...
Click to collapse
yes but I wanted to create a flash because no one came the idea, greetings :good:
ronaldvalles said:
if correct. so do not understand why the FXP not resolved. est is due to kamarush
Click to expand...
Click to collapse
But have you compiled the files yourself or is it from 4.1.B.0.431 (or another Sony ICS build)?
I am asking because I would like to know.
Sony has provided the sourcecode for the sensors, but so far it looks like they are not as stable as the builds that Sony is using themselves.
So it would be nice to know if you are using your own builds or are using the files from 4.1.B.0.431 (or another Sony ICS build).
hnl_dk said:
But have you compiled the files yourself or is it from 4.1.B.0.431 (or another Sony ICS build)?
I am asking because I would like to know.
Sony has provided the sourcecode for the sensors, but so far it looks like they are not as stable as the builds that Sony is using themselves.
So it would be nice to know if you are using your own builds or are using the files from 4.1.B.0.431 (or another Sony ICS build).
Click to expand...
Click to collapse
Since Sony released the official ICS, the solution to the accelerometer had existed, but as I said thank kamarush, caused me to create a zip with the solution, and works 100%.
ronaldvalles said:
Since Sony released the official ICS, the solution to the accelerometer had existed, but as I said thank kamarush, caused me to create a zip with the solution, and works 100%.
Click to expand...
Click to collapse
Okay, so you have copied the files form an official Sony ICS build.
Again, what release is it from, is it from 4.1.B.0.431?
fix not work My LWW Crash Sensor Settings
Orochixxx said:
fix not work My LWW Crash Sensor Settings
Click to expand...
Click to collapse
try this and report
http://www.mediafire.com/?8us54pgqoa97eat
ronaldvalles said:
try this and report
http://www.mediafire.com/?8us54pgqoa97eat
Click to expand...
Click to collapse
Thanks Work For My LWW
Xperia Mini - 50 fps in Accelerometer Monitor on FXP 127 with fix.
4fps w/o fix.
Guess its working pretty well now, good job
instead of using prebuilt libs from sony roms you can always look for an fix in DASH
br
J
Works on ics miui. Thanks.
Sent from my Nokia 3310
First of all this is a Work In Progress thread, ONLY for devs discuss.
Only just for experienced users, and devs! So no spam please!
'Complete' build from AOSP sources, with community and our own fixes.
Current progress:
- Booting
- 2D/3D working
- Audio
- Touchscreen
- Lights
- Bluetooth
- Gps
- Hw Keyboard
- Accelerometer
- SDCard Mount
Not working:
- Gsm
- Wifi
- etc /WIP/
Kernel:
Download Only for Mini Pro , but if you take this ramdisk, for your device's zImage, it should be work too.
Rom:
Download Only for Mini Pro, so if you want to do on other phone, replace the files, first.
So, be the part of the porting, if you feel enough knowledge of this. Everyone who join, will get credits; So this will be the first huge team work, of the Xperia Mdpi devs
reserved
it looks that i have to unlock my bootloader
Awesome.
.
All the best.
Do not mark this as spam. Okay?
Sent from my SK17i using xda appdevelopers app
so we all will see JB 4.1 for mini too...
great work KAMARUSH keep up the good work....
cheerssssssssss.............
Kernel and Rom are online, so let's start this
kamarush said:
Kernel and Rom are online, so let's start this
Click to expand...
Click to collapse
So i just need to replace the files from /dev/lww in MiniCMSandwich 4 with this rom?
And i can't repack boot images, not on linux and not on windows: "Android magic not found in boot.img. Giving up"
Thank you for all of your hard work
I'd love to help you porting JB
Sent from my XperiaMiniPro running Cyanogenmod 9. Thanks FreeXperiaProject, you made my Xperia™ free
yeah great bro
Ok, I have included your ramdisk in your ICS kernel for LWW, it boots. Now I try to port your zip
pikpok said:
Ok, I have included your ramdisk in your ICS kernel for LWW, it boots. Now I try to port your zip
Click to expand...
Click to collapse
woh lww.. im waiting bro.
im try to lww device,..
pikpok said:
Ok, I have included your ramdisk in your ICS kernel for LWW, it boots. Now I try to port your zip
Click to expand...
Click to collapse
Please send me only the kernel
I can't repack it
xdevilium said:
Please send me only the kernel
I can't repack it
Click to expand...
Click to collapse
http://dl.dropbox.com/u/8422497/bootjelly.img
I replaced lib folder and tried to run, now my touchscreen isn't working now, I'm flashing stock ICS ftf, hope that helps...
@edit - It's working....
Kamarush can u give me kernel for lww pls
mv_style said:
Kamarush can u give me kernel for lww pls
Click to expand...
Click to collapse
You have kernel in my previous post...
deleted
pikpok said:
You have kernel in my previous post...
Click to expand...
Click to collapse
But u said it isnt booting.
Okay now im getting on it
it booted, but touchscreen does not work as pikpok pointed out..
i took the minicm lite zip and replaced all the files from the /dev/lww to the subsequent folders from the JB zip. touchscreen should work right?
gandhar said:
it booted, but touchscreen does not work as pikpok pointed out..
i took the minicm lite zip and replaced all the files from the /dev/lww to the subsequent folders from the JB zip. touchscreen should work right?
Click to expand...
Click to collapse
The touch is working but, it responds very-very-very late...
You can notice, when the phone booted up, and you touch the area where where the lockscreen unlock is.
This is what i'm talked about. Need to play a little with the gralloc, or with the libs from an aosp or aokp rom.
kamarush said:
The touch is working but, it responds very-very-very late...
You can notice, when the phone booted up, and you touch the area where where the lockscreen unlock is.
This is what i'm talked about. Need to play a little with the gralloc, or with the libs from an aosp or aokp rom.
Click to expand...
Click to collapse
New JB framework causes lags?
I'm sure most of you have seen Mjolnir on CM9. Well, I'm pleased to finally announce that I have a version for CM7!
I won't even bother trying to put what's working and what's not, instead, I'll just list what I've changed.
Added in numerous Governors
Added sio scheduler
Disabled ALS
So there you have it.
Mjolnir Gingerbread
Oh, before I forget. Once you flash the kernel, let your phone boot all the way. Check your cpu speed with SetCPU or whatever, and make sure it's actually scaling. If not, flash the kernel again. On my phone, it took two flashes for it to take all the way.
Here's my source: https://github.com/lightningdude/semc-kernel-msm7x30/tree/gingerbread
the first yaaay thanks keep going man !!
Good job bro, keep up the awesome work
Tnx dude! Works, and looks fine!
Update pls? camera is broken on FXP130
Can u make one for normal ginger bread
Sent from my Xoom using Tapatalk 2
AudioCreaper said:
Update pls? camera is broken on FXP130
Click to expand...
Click to collapse
This kernel was based off fxp130 with fxp sources..He can't update because there is no updating to be done to the kernel since fxp stopped work on cm7
agraceful said:
This kernel was based off fxp130 with fxp sources..He can't update because there is no updating to be done to the kernel since fxp stopped work on cm7
Click to expand...
Click to collapse
If its based of FXP130 shouldn't the camera be working? Or maybe FXP didn't update his kernel sources? bummer.
faisaldante said:
Can u make one for normal ginger bread
Sent from my Xoom using Tapatalk 2
Click to expand...
Click to collapse
Use DooMKerneL for normal gingerbread. DooMLoRD is a kernel god here, and I wouldn't dare try to make something better than him, since it wouldn't work anyway.
AudioCreaper said:
If its based of FXP130 shouldn't the camera be working? Or maybe FXP didn't update his kernel sources? bummer.
Click to expand...
Click to collapse
Is anyone else having camera problems? The memory is allocated correctly to the camera, so it might not actually be a kernel issue. Does it work on FXP kernel?
lightningdude said:
Use DooMKerneL for normal gingerbread. DooMLoRD is a kernel god here, and I wouldn't dare try to make something better than him, since it wouldn't work anyway.
Is anyone else having camera problems? The memory is allocated correctly to the camera, so it might not actually be a kernel issue. Does it work on FXP kernel?
Click to expand...
Click to collapse
Camera works with FXP kernel.
I did try logcatting it, one of the errors was that pmem_camera file was missing. It was when I was on your kernel, but it there when i'm on FXP kernel
A while ago i started porting the 3.0 kernel from the galaxy s plus (ariesve) to ray. Unfortunately I ran into some errors with the mogami board file. Havent had much time to to solve those, and probably wont have the coming weeks, so here is the source;
https://github.com/daeiron/semc_urushi_kernel_3.0
If you want you can download it and try to compile and solve those board errors.
Ported from this: https://github.com/ivendor/samsung-kernel-msm7x30
Use ´urushi_defconfig´ config to compile.
Again its in a VERY early stage, not bootable.
I believe most of the drivers are in there though (led, touchscreen, display, wifi etc)
Thanks for sharing this work, I hope that this will inspire other kernel developers such as the irii guys or maybe even FXP
Also good job with all of your work on the Ray.
Look I'm working with ExPeacer kamarush and adridu59 a while i think a half year on this kernel https://github.com/irii-soft now I'm working on 2.6.35 to get the clock and acpuclock source to worke and then to port to 3.0 and 3.4
bg
iriijo / irii-soft
iriijo said:
Look I'm working with kamarush and adridu59 a while i think a half year on this kernel https://github.com/irii-soft now I'm working on 2.6.35 to get the clock and acpuclock source to worke and then to port to 3.0 and 3.4
bg
iriijo / irii-soft
Click to expand...
Click to collapse
So your working on both .35 and 3.0? do you have .35 on github too?
thomas1991_12 said:
So your working on both .35 and 3.0? do you have .35 on github too?
Click to expand...
Click to collapse
Not yet soon no time to upload
well, PAC v18.0.0 alpha is JB 4.2, so probably running with a 3.x kernel? maybe you can get some ideas on how to solve the problem there?
i personally cannot be of help, sorry and thanks for your work!
XsheldorX said:
well, PAC v18.0.0 alpha is JB 4.2, so probably running with a 3.x kernel? maybe you can get some ideas on how to solve the problem there?
i personally cannot be of help, sorry and thanks for your work!
Click to expand...
Click to collapse
Everything you wrote here is incorrect, except for the part where you said that you cannot be of any help
The JB 4.2 version released by szl.kiev (author of PACman) is not called PAC v18.0.0 alpha, but is called JB 4.2 pre-alpha vXX or Urushi JB 4.2 SHIPWRECK EDITION.
As szl.kiev states: "Use any jb kernel (inside zip is an old PAC v18.0.0 kernel)" (Read not 3.x kernel)
All information is found at the PACman thread: http://forum.xda-developers.com/showthread.php?t=1803076
Welcome to XDA
iriijo said:
Look I'm working with ExPeacer kamarush and adridu59 a while i think a half year on this kernel https://github.com/irii-soft now I'm working on 2.6.35 to get the clock and acpuclock source to worke and then to port to 3.0 and 3.4
bg
iriijo / irii-soft
Click to expand...
Click to collapse
How procede the .35 porting? Did you do any progress?
At yet now because i have not match Time :/
Sent from my ST18i using xda app-developers app
Can you describe the process of porting a kernel?
An example of a certain driver or file would be extremely helpful.
Thanks in advance.