[KERNEL|12|05|13][teaMSeven|V.4[2GHz|VC|BLINKBUTTONS|H2W|LINARO-o3|FULL-OTG] - One (M7) Original Android Development

teaMseven_kernel_SENSE
based on HTC Source 1.29.1540.3 Developer Edition​
HOWTO REPORT ERRORS -> THE RIGHT WAY
-) YOU need to provide me the following information, otherwise I´m not able to help:
-) On wich ROM you are
-) Wich Kernel and wich modules did you flash
-) ALWAYS provide a last_kmsg AND a logcat (you dont know how to do that ? Use google or search here in this forum, its posted nearly everywhere)
-) posts like "XYZ feature on ROM XYZ does not work" will be ignored (what should i do with that information ???)
CHANGELOG (old versions) & KERNEL FEATURES
Code:
[B]teaMseven_kernel_SENSE_vv3.7[/B]
- initial release
- Fixed audio routing issue with voice calls [phone's earpiece amplification fixed, htc left out a good chop from its released kernel sources]
- Added NTFS (read/write) support
- All in one installer - script by [user=1118681]@he_stheone64[/user] (thanks !)
- Added init.d support (thanks [user=3828647]@torxx[/user] !)
- teaMSeven version - cooperation of n3ocort3x and tbalden
- cleaned up synaptics_3k driver
- linaro optimized
- adding performance installer with 192mhz underclock (thanks pingpong)
- CIFS enabled
- added Votlage Control
- Enabled system write
- Disabled perf lock
[B]teaMseven_kernel_SENSE_v3.7.1[/B]
-added XZ compression
-fixed Voltage Control
-fixed sticking of frequencies
-linaro -o3 optimizations (before it was -o2)
-enabled interactive governor
-updated interactive governor to MAKO baseline and CAF updates (thx kozmikkick)
-updated ondemand governor to CAF baseline (thx kozmikkick)
-added wheatley governor
-added SIO I/O Sched
-added FIOPS I/O SCHED
[B]teaMseven_kernel_SENSE_v3.8[/B]
- added Sweep2Wake to variants
- slighty stronger vibration for Wake and Sleep events (so you will really notice accidental wakes)
- tweak deadline io scheduler for more performance
- added fsync on/off support (on by default, check sysfs)
- added ROW I/O scheduler
- added BFQ v6 scheduler
- added USB fast charge option (off by default, check sysfs)
- added smartmax governor (thanks MaxWen!)
[B]teaMseven_kernel_SENSE_v3.9.2[/B]
- fixed longtap Logo sleep for S2W and H2W modes
- added Blinking Buttons notification feature (idea and first implementation by [email protected])
- added 324 MHz freq and removed unused 192 MHz
- more freqs below 378 MHz will follow, still ironing out some bugs
- fastcharge retested (trickstermod works)
- added new way to register longtap Logo2Wake / Logo2Sleep - you can leave your finger on the Logo now, and it will wake/sleep on long tap. More convenient and intuitive.
[B]teaMseven_kernel_SENSE_V.4[/B]
-updated Aroma installer with changelogs and version number
-added lowfreqs (135MHz, 162MHZ, 216MHz, 270MHz)
-added highfreqs (1836MHz, 1890MHz, 1944MHz, 1980MHz)
-added new thermal implementation
-fix laggy boot for PVS_2 Devices (and below)
-disabled PNP manager (fixes freq sticking)
Variants
HOME2Wake and HTCLogo2Sleep:
- What is HOME2Wake -> It's a bit similar to Sweep2Wake, but instead of swiping through the capacitive buttons, you have to push the Home button instead, to wake the device from sleep. Then press HTC logo to switch screen off. At times it takes 2 consecutive presses when the phone is in deepsleep. Still testing this stuff.
VIDEO:
HOME2Wake and HTCLogoMenu:
HOME -> wakes phone
HTC Logo -> Menu button mapping
HTCLogo long tap -> screen off
VIDEO:
BLINK BUTTONS
VIDEO:
SENSE DOWNLOAD LINKS
PERFORMANCE EDITION V.4
BENCHMARKS
V3.8, no GPU and NO CPU OC YET
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Github
Link
Installation
0. go into Recovery
0.1 DO A NANDROID backup if you didnt already -- if anything goes cheesy, restore your backup
1. flash All-In-One installer zip (aroma menus will ask for options)
2. reboot
Configuration of HOME2WAKE/HTCLogo behavior
You can select the Variant you want in the Aroma installer, and also select a mod to Disable on-screen three-dot menu button (useful if you use HTCLogo2Menu configuration)
Possible variants you can select in installer (recovery):
- Stock (no wake, no menu, no sleep button)
- Home2Wake + HTCLogo2Menu and long tap HTCLogo2Sleep
- Home2Wake + HTCLogo2Sleep with long tap
- Home2Wake + HTCLogo2Sleep with short tap
- HTCLogo2Menu
- Home2Wake
- HTCLogo2Wake + HTCLogo2Sleep with long tap
- HTCLogo2Wake + HTCLogo2Sleep with short tap
- HTCLogo2Wake + HTCLogo2Menu and long tap HTCLogo2Sleep
- Sweep2Wake + HTCLogo2Sleep with long tap
- Sweep2Wake + HTCLogo2Sleep with short tap
- Sweep2Wake + HTCLogo2Menu (will give you long tap HTCLogo2Sleep)
About development of this kernel:
This is the exact copy of tbalden´s kernel from his original thread, with all his h2w and htc logo stuff integrated + OC / UV / LINARO /GPU / SCHEDS / GOVERNORS / ETC...
In the future i will add stuff and keep in sync with tbalden. I´m more then proud to work with such an aweseome dev together. I dont have the device yet, so its really improtant to provide me logs, kmsg, etc if u run into trouble. But also when i get the device, its important to provide me such stuff. I will do my best to get the most out of our HTC ONE´s
Disclaimer
-) I am not responsible for bricked devices
-) you do this on your own will
-) If you flash this, your warranty will be void
CREDITS
@pinpong for letting me know for what the hex values are thx

---

Stable Edition for Sense with Android 4.1.2​
This part contains the non-OC/UV version, compiled with standard GCC 4.6
This edition is for the users who only want the usability features and no speed,voltage or other cpu gpu related changes. It's safe to install it for the average non tweaker users.
- Compiled from HTCDev source
- Fixed audio routing issue with voice calls [phone's earpiece amplification fixed, htc left out a good chop from its released kernel sources]
- Adds support for more USB OTG devices than official HTC kernel - (pls test if you think your DSL etc and report - only works if your phone's charged above 30%!) - PS3 controller wont work, htc's bluetooth stack is a no-go
- Added CIFS (windows share filesystem mount support, use CIFS manager)
- Added NTFS (read/write) support
- All in one installer - script by @he_stheone64 (thanks !)
- Added init.d support (thanks @torxx !)
- H2W/L2W/L2M/S2W
- blinking buttons (button light notification) - be aware that only blinks on notification if phone's not charging, and when screen is not on
- Based on latest kernel source: 1.29.1540.3 Developer Edition
- Tested on 1.28.401.7 (please report your Build number if differs), international One (m7, from UK)
Known issues:
- None
- Aroma installer sometimes exits in the setup process, try again till success, progress slowly between pages, count to 3 before pressing Next
KNOWN TO WORK ON:
- 1.28 International edition based ROMs, and 1.29 (1.29.1540.3) developer edition based ROMs, updates up to 1.29.401.5, 1.29.xxx.13
!Doesnt work on Sprint HTC One variant, as it's CDMA, not GSM!
STABLE EDITION SENSE DOWNLOAD
4.0.0 Stable All-In-One installer zip (flash from recovery) - kernel and modules and keylayout and working camera firmware
teaMseven-sense-kernel-v4.0.0-stable-full_installer.zip: http://d-h.st/br9
Use CWM or another AROMA compatible recovery. You can select all stuff from Menus, no need for additional flashing. If you get stuck, or exits to Recovery menu, try again. Should work! (Aroma is sometimes a bit flaky, but it works, preferably press Next buttons in installer a bit slower, that way it's more stable)
Changelog
Version 4.0.0-stable (.16 base) - June-4-2013
Version 3.9.2-stable (codename: 'the next big thing') - May-4-2013
- Added BlinkingButtons feature - architectural idea and first implementation by tbalden
Version 3.9.1-stable - May-3-2013
- fixes Long tap sleep for S2W and H2W modes
Version 3.9-stable - May-3-2013
- added new way to register longtap Logo2Wake / Logo2Sleep - you can leave your finger on the Logo now, and it will wake/sleep on long tap. More convenient and intuitive for me. Hope you'll like it!
- removed 192Mhz step
Version 3.8-stable - May-1-2013
- added Sweep2Wake to variants
- slighty stronger vibration for Wake and Sleep events (so you will really notice accidental wakes)
- xz compression
- added 192Mhz step (set it in one of the usual system tuner apps, stable enough,so i added it to Stable Edition)
- fixed frequencies to stick - (thx showp-1984)
Older versions:
teaMseven-sense-kernel-v3.9.2-stable-full_installer.zip: http://d-h.st/MwG
teaMseven-sense-kernel-v3.9.1-stable-full_installer.zip: http://d-h.st/jU5
teaMseven-sense-kernel-v3.9-stable-full_installer.zip: http://d-h.st/WSv
teaMseven-sense-kernel-v3.8-stable-full_installer.zip: http://d-h.st/xvQ
teaMseven-sense-kernel-v3.7-full_installer.zip: http://d-h.st/f0t
tbaldens-sense-kernel-v3.6-full_installer.zip: http://d-h.st/uSB
tbaldens-sense-kernel-v3.5-full_installer.zip: http://d-h.st/WQy
tbaldens-sense-kernel-v3.4-full_installer.zip: http://d-h.st/FHA
Configuration variants, additional flashables (using init.d): http://forum.xda-developers.com/showpost.php?p=40672557&postcount=211
tbaldens-sense-kernel-v3.2-full_installer.zip: http://d-h.st/3FV
tbaldens-sense-kernel-v3-full_installer.zip: http://d-h.st/S35
Unified boot.img with switches (2.0): http://forum.xda-developers.com/showpost.php?p=40631815&postcount=133
Camera Flashable fix for v3.0 + ROM versions 1.29.xxx.12 and 1.29.xxx.13 here: http://forum.xda-developers.com/attachment.php?attachmentid=1908030&d=1366810966 - you NEED this flashed from recovery, if you're on a rom based on those versions, so camera will work
http://d-h.st/SIE - Base version 1.0 (not with HOME2Wake)
http://d-h.st/4ZM - HOME2Wake & HTCLogo2Sleep version 1.1, test version, might need two taps when it deepsleeps, Push HTC logo for screen off
http://d-h.st/JkK - HOME2Wake & HTCLogoMenu version 1.1 (if you want HTC Logo as Menu button)
modules installer 1.1 (flashable from recovery), only for 2.0 version and below, for Wifi and kernel modules + HTCLogoMenu button, not needed for 3.0+ http://d-h.st/7Iq
INSTALLATION
0. go into Recovery
0.1 DO A NANDROID backup if you didnt already -- if anything goes cheesy, restore your backup
1. flash All-In-One installer zip (aroma menus will ask for options)
2. reboot
CONFIGURATION OF HOME2WAKE/HTCLogo behavior
You can select the Variant you want in the Aroma installer, and also select a mod to Disable on-screen three-dot menu button (useful if you use HTCLogo2Menu configuration)
Possible variants you can select in installer (recovery):
- Stock (no wake, no menu, no sleep button)
- Home2Wake + HTCLogo2Menu (will give you long tap HTCLogo2Sleep)
- Home2Wake + HTCLogo2Sleep with long tap
- Home2Wake + HTCLogo2Sleep with short tap
- HTCLogo2Menu
- Home2Wake
- HTCLogo2Wake + HTCLogo2Sleep with long tap
- HTCLogo2Wake + HTCLogo2Sleep with short tap
- HTCLogo2Wake + HTCLogo2Menu (will give you long tap HTCLogo2Sleep)
- Sweep2Wake
- Sweep2Wake + HTCLogo2Sleep with long tap
- Sweep2Wake + HTCLogo2Sleep with short tap
- Sweep2Wake + HTCLogo2Menu (will give you long tap HTCLogo2Sleep)
Source
https://github.com/TeaMSeven/android_kernel_htc_m7-sense - master and performance branch
Additional resources
Cifs manager: https://play.google.com/store/apps/details?id=ws.plattner.cifsmanager&hl=en

---

and another one for me

---

U guys got me teamSeven't...
one'ed using Graptar's Hammer.... by the sons of Waran

---

testing

---

I will try and report
Gesendet von meinem HTC One mit Tapatalk 2

---

biohaufen said:
I will try and report
Gesendet von meinem HTC One mit Tapatalk 2
Click to expand...
Click to collapse
I thought u quited testing ?? good u are back :victory:

---

Up and running
UV works
192 MHz works
Set max clock reset after screen off
HTC powersaver no clock change
...
Thanks mates
one'ed using Graptar's Hammer.... by the sons of Waran

---

Just flashed aroma went well no crashing will test any ideas for a good voltage or just leave at 900 any advice would be good thanks

---

Yes I were back to stock for a few days. But after a while I were bored :/
Gesendet von meinem HTC One mit Tapatalk 2

---

Good to see you two together

---

Great to see you work together. Hopefully I can test your little baby soon
Sent with a JellyBlack HTC One X

---

I think that OC doesn't work. (max clock is still 1.72 GHz). Logo for menu does work really good, will test UV later...
Gesendet von meinem HTC One mit Tapatalk 2

---

biohaufen said:
I think that OC doesn't work. (max clock is still 1.72 GHz). Logo for menu does work really good, will test UV later...
Gesendet von meinem HTC One mit Tapatalk 2
Click to expand...
Click to collapse
i dont think theres overclocking yet, or underclocking. Would like to see underclocking though.
Home to wake and logo to sleep works.
Trying to get u.ndervolting to work though. fauxclock vc doesnt work, worked with flar's kernel. VC doesnt work atm.

---

VC is working, but changing CPU clock isn't. (I think it would be better to set CPU clock etc. in Aroma, because the apps doesn't work well atm)
Kernel seems to be really fast
Gesendet von meinem HTC One mit Tapatalk 2

---

deagleone said:
Up and running
UV works
192 MHz works
Set max clock reset after screen off
HTC powersaver no clock change
...
Thanks mates
one'ed using Graptar's Hammer.... by the sons of Waran
Click to expand...
Click to collapse
yeah... I have to look into that tomorrow... thanks for reporting !

---

jaythenut said:
Just flashed aroma went well no crashing will test any ideas for a good voltage or just leave at 900 any advice would be good thanks
Click to expand...
Click to collapse
I too would like to see others' UV settings. As a start, I just used trickster to set a -50mV UV across the board. It seems to be stable. Made it through various benchmarks.
Edit: ended up taking an additional 25mV off the top two frequencies. Still running great.
Sent from my HTC One using Tapatalk 2

---

expertzero1 said:
i dont think theres overclocking yet, or underclocking. Would like to see underclocking though.
Home to wake and logo to sleep works.
Trying to get u.ndervolting to work though. fauxclock vc doesnt work, worked with flar's kernel. VC doesnt work atm.
Click to expand...
Click to collapse
i dont know much about all this still learning but i think underclocking is working set mine to 192m

---

jaythenut said:
i dont know much about all this still learning but i think underclocking is working set mine to 192m
Click to expand...
Click to collapse
Yep 192mhz is available in the performance edition.
Sent from my HTC One using Tapatalk 2

---

tbalden said:
Yep 192mhz is available in the performance edition.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Does OC work or it resets itself?
Sent from my HTC One using xda premium