Hello there!
I am writing to tell about my problem, namely when I plug in an otg host cable with a pendrive the system says that it takes to much electric energy... I have never had this problem with ICS. Could someone explain me what is wrong or how to shoot the problem? I would be graceful.
Thanks in advance!
Sent from my LT22i using xda app-developers app
+1
Stock and locked xGO beans.
Related
I am sorry to start a new a thread but for more than 2 hours trying to do this and no luck.
I have an X10a that for some reason is stuck on the Sony Ericsson logo anyway i have been trying to flash it using x10 flash tool but every time i get to where it says press back button and connect usb it just wont work it does not recognize its connected i have Win7 64 BIT. PLEASE HELP
Please help
Try taking the battery out hold back button plug in cable then put battery back in
Sent from my X10i using XDA Premium App
Tried no luck
There is an option under help i think that is called check driver or similar. Only if every driver is installed it works. If not make sure that you installed the driver from the driver dir. Also unpack the three archives, cause there are the hsusb driver.
Next time use the right section!
Sent from my X10 using xda premium
punkkeks said:
There is an option under help i think that is called check driver or similar. Only if every driver is installed it works. If not make sure that you installed the driver from the driver sir. Also unpack the three archives cause there are the hsusb driver.
Next time use the right section!
Sent from my X10 using xda premium
Click to expand...
Click to collapse
Where i cant and dont know where the help option?
OH I SEE CLICKED ON IT NOTHING HAPPENED
Then search it! There is an option in flashtool that will check your drivers. I wont make everything for you. If you don't know what you are doing, leave it!
Make a screenshot
Sent from my X10 using xda premium
punkkeks said:
Then search it! There is an option in flashtool that will check your drivers. I wont make everything for you. If you don't know what you are doing, leave it!
Make a screenshot
Sent from my X10 using xda premium
Click to expand...
Click to collapse
I did nothing happened i use to know how to do this and did it so much times before but after my COMA things haven't been easy.
Thank u for the advice i am not asking you to do everything for me
Alright. You plug in your device in flash mode and then click check drivers quick before the mode ends. Three lines should appear.
Also you have to check under your device manager if there are 3 semc devices. Make screenies and then we will se
Sent from my X10 using xda premium
punkkeks said:
Alright. You plug in your device in flash mode and then click check drivers quick before the mode ends. Three lines should appear.
Also you have to check under your device manager if there are 3 semc devices. Make screenies and then we will se
Sent from my X10 using xda premium
Click to expand...
Click to collapse
Thank you Sir but under device manager i dont have of the semc devices
I'm not a sir I'm just a guy from Germany. If you plug in your device, do you hear the plug sound from windows?
Sent from my X10 using xda premium
punkkeks said:
I'm not a sir I'm just a guy from Germany. If you plug in your device, do you hear the plug sound from windows?
Sent from my X10 using xda premium
Click to expand...
Click to collapse
No i dont i believe the issue is a USB driver
Bad. Try another USB port and if windows asks use the driver from the archives
Sent from my X10 using xda premium
punkkeks said:
Bad. Try another USB port and if windows asks use the driver from the archives
Sent from my X10 using xda premium
Click to expand...
Click to collapse
I did i even tried another PC
Use another USB cable and make sure that your USB port from your device is alright
Sent from my X10 using xda premium
punkkeks said:
Use another USB cable and make sure that your USB port from your device is alright
Sent from my X10 using xda premium
Click to expand...
Click to collapse
OK thanks.
Thank you very much man i appreciate it its flashing now all i had to do is change the usb cable
That's Murphy's law have fun
Sent from my X10 using xda premium
friends someone could help me with this? qe is my XS connects to the charger and the charging time is way too slow and ... to load and use it while going in reverse, only load if I do not use.
XS STOCK ICS .45
Sent from my LT26i using xda premium
Thread moved to the Q & A section, post in the relevant section next time.
danytrial said:
friends someone could help me with this? qe is my XS connects to the charger and the charging time is way too slow and ... to load and use it while going in reverse, only load if I do not use.
XS STOCK ICS .45
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
are you using your stock charger? Do you have some heavy apps running in background?
Turn off the phone and charge it, if it charges normal then it's a software problem.
Check for any new installed apps, make sure ur data and GPS are off and try again.
Sent from my Xperia S using XDA app.
Hey guys, I've got a problem where my phone isn't recognized by my computer when I connect it. It was working just fine a while ago and I didn't modify anything except copy over a few files the last time I connected it into the computer.
I'm on CM9 if that helps with anything, and I don't know what else to say but if you need more information I'll be more than happy to provide it for you.
Thanks
Try changing version specific modem.... Look for cell... Ty
Sent from my GT-I9100 using xda premium
Their are more then 1 reasons for your problem:-
Try to clean your gs2 USB port.
Try to insert cable in different PC USB port.
Try with a different USB cable.
and last thing if all upper things not work then change your rom with full wipe
Sent from my GT-I9100 using Tapatalk 2
Did you reinstall the drivers on the PC . As I had this issue driver reinstall also check antivirus isn't disabling driver install / auto run
Sent from my GT-I9100 using xda app-developers app
Nishu_gamer said:
Their are more then 1 reasons for your problem:-
Try to clean your gs2 USB port.
Try to insert cable in different PC USB port.
Try with a different USB cable.
and last thing if all upper things not work then change your rom with full wipe
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
How can i clean my gs2 usb port ?
I hane no problem with usb cable. I.m using it at a lot of other devices... And no problems.
Sent from my GT-I9100 using XDA Premium HD app
Hey lads mI'm trying to root my archos 97 carbon using the archtab.com website... I dont know how to flash I read instructions but its confusing... I put my paperclip in reset hole and pressed on home button but nothing happened and my tab is off when I'm doing it because it says to... Plz help me
found out thats its the same as recovery mode... i pressed the volume+ button and power button at the same time but nothing happened plz help...
From what I read at arctablet.com,
Only insert the paperclip in the reset pinhole and press the home button.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
From what I read at arctablet.com,
Only insert the paperclip in the reset pinhole and press the home button.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
i tried tht and nothing happened
bublz654 said:
i tried tht and nothing happened
Click to expand...
Click to collapse
Try to do that + plug the USB cable.
Did you read at this website : http://www.arctablet.com/blog/featured/flashing-arnova-g2-rockchip-2918-rockchip-flashing-tool/
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
i did read that at the website but didnt know when to plug the usb cable... just did it nope nothing
bublz654 said:
i did read that at the website but didnt know when to plug the usb cable... just did it nope nothing
Click to expand...
Click to collapse
It looks like didn't work . . But, you should read the comments from the link above.
And watch the video http://www.arctablet.com/blog/featu...firmware-root-2gb-space-apps-arnova-9-g3-too/
(Since Arnova 9 G3 had the same method with the Archos 97 Carbon).
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
do i have to have the device on or off ?
bublz654 said:
do i have to have the device on or off ?
Click to expand...
Click to collapse
Read it on "Flashing your Arnova G2, Arnova G3, Rockchip RK29xx/RK30xx based tablet with Rockchip flashing tool"
Number 1 : Shutdown the tablet, you may want to wait for a few seconds to make sure it does not restart
Then do the above reply from insert a paperclip in the Reset pinhole of the tablet and press the Home button + plug the USB cable.
Wait for it to detect on the computer (make sure you installed the driver).
And then read carefully & watch the video.
Hope it helps you
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
Read it on "Flashing your Arnova G2, Arnova G3, Rockchip RK29xx/RK30xx based tablet with Rockchip flashing tool"
Number 1 : Shutdown the tablet, you may want to wait for a few seconds to make sure it does not restart
Then do the above reply from insert a paperclip in the Reset pinhole of the tablet and press the Home button + plug the USB cable.
Wait for it to detect on the computer (make sure you installed the driver).
And then read carefully & watch the video.
Hope it helps you
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
I just dunno how can i do it i tried everything but nope
Sent from my LG-E400 using xda app-developers app
The steps were very clear, though.
I've done my best to help.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
The steps were very clear, though.
I've done my best to help.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
I know they are very clear but i just can't seem to manage it
Sent from my LG-E400 using xda app-developers app
As you can see in the comments, they seem to manage it.
But here's a thing that you must first read carefully, try to understand it, then try that step by step.
If you seem can't to manage it, maybe a friend near you can help. So it will be easier to do.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
As you can see in the comments, they seem to manage it.
But here's a thing that you must first read carefully, try to understand it, then try that step by step.
If you seem can't to manage it, maybe a friend near you can help. So it will be easier to do.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
Ill find someone
Sent from my LG-E400 using xda app-developers app
I fail because my win 10 lap doesn't find the RK29 drivers....is there any possibility to manage it that it will run on my computer? are there any driver available?
Hey guys,
a week ago i've noticed that my power button is a bit too sensitive, now i'm just touching it like the homescreen and the display turns off. Sometimes it stays pushed and reboot for several times, can somebody help me? Please don't give the answer: "Send it to Samsung" or something else, i haven't got guarantee anymore, so i want to fix it myself.:good:
Then you need to dismantle the phone see the SGS3 tear-down via Google .
jje
What for?
Sent from my GT-I9300 using xda app-developers app
dannyphantom97 said:
What for?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
To dismantle the phone and fix the power button? Obviously it is some kind of hardware challenge and not software, hence open up the phone is needed I guess.
dannyphantom97 said:
What for?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Simple you said ....? Please don't give the answer: "Send it to Samsung" or something else
That leaves you to fix it