Hey lads mI'm trying to root my archos 97 carbon using the archtab.com website... I dont know how to flash I read instructions but its confusing... I put my paperclip in reset hole and pressed on home button but nothing happened and my tab is off when I'm doing it because it says to... Plz help me
found out thats its the same as recovery mode... i pressed the volume+ button and power button at the same time but nothing happened plz help...
From what I read at arctablet.com,
Only insert the paperclip in the reset pinhole and press the home button.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
From what I read at arctablet.com,
Only insert the paperclip in the reset pinhole and press the home button.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
i tried tht and nothing happened
bublz654 said:
i tried tht and nothing happened
Click to expand...
Click to collapse
Try to do that + plug the USB cable.
Did you read at this website : http://www.arctablet.com/blog/featured/flashing-arnova-g2-rockchip-2918-rockchip-flashing-tool/
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
i did read that at the website but didnt know when to plug the usb cable... just did it nope nothing
bublz654 said:
i did read that at the website but didnt know when to plug the usb cable... just did it nope nothing
Click to expand...
Click to collapse
It looks like didn't work . . But, you should read the comments from the link above.
And watch the video http://www.arctablet.com/blog/featu...firmware-root-2gb-space-apps-arnova-9-g3-too/
(Since Arnova 9 G3 had the same method with the Archos 97 Carbon).
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
do i have to have the device on or off ?
bublz654 said:
do i have to have the device on or off ?
Click to expand...
Click to collapse
Read it on "Flashing your Arnova G2, Arnova G3, Rockchip RK29xx/RK30xx based tablet with Rockchip flashing tool"
Number 1 : Shutdown the tablet, you may want to wait for a few seconds to make sure it does not restart
Then do the above reply from insert a paperclip in the Reset pinhole of the tablet and press the Home button + plug the USB cable.
Wait for it to detect on the computer (make sure you installed the driver).
And then read carefully & watch the video.
Hope it helps you
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
Read it on "Flashing your Arnova G2, Arnova G3, Rockchip RK29xx/RK30xx based tablet with Rockchip flashing tool"
Number 1 : Shutdown the tablet, you may want to wait for a few seconds to make sure it does not restart
Then do the above reply from insert a paperclip in the Reset pinhole of the tablet and press the Home button + plug the USB cable.
Wait for it to detect on the computer (make sure you installed the driver).
And then read carefully & watch the video.
Hope it helps you
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
I just dunno how can i do it i tried everything but nope
Sent from my LG-E400 using xda app-developers app
The steps were very clear, though.
I've done my best to help.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
The steps were very clear, though.
I've done my best to help.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
I know they are very clear but i just can't seem to manage it
Sent from my LG-E400 using xda app-developers app
As you can see in the comments, they seem to manage it.
But here's a thing that you must first read carefully, try to understand it, then try that step by step.
If you seem can't to manage it, maybe a friend near you can help. So it will be easier to do.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
As you can see in the comments, they seem to manage it.
But here's a thing that you must first read carefully, try to understand it, then try that step by step.
If you seem can't to manage it, maybe a friend near you can help. So it will be easier to do.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
Ill find someone
Sent from my LG-E400 using xda app-developers app
I fail because my win 10 lap doesn't find the RK29 drivers....is there any possibility to manage it that it will run on my computer? are there any driver available?
Related
Ok hey xda! 4 a long time this vibrant been sittin at my crib. Power button gone...right down to the motherboard if ya tore 1 down u comprehend...anyway plug in this lg wall charger...instead of offline battery widget it actually boots my phone upon plugin...so I root it...z4root 1.3...rom manager...clockworkmod manual flash...bam just like that everytime phone boots it loads recovery menu and I got no ok button...is there anyway to just get a normal boot...I still have vol up and vol down...and if I understood the sdk solution I could do it. My ?...can anybody help a lil?
If I know right the home or back to utton is a ok select in clock work recovery.
motiv8d365 said:
Ok hey xda! 4 a long time this vibrant been sittin at my crib. Power button gone...right down to the motherboard if ya tore 1 down u comprehend...anyway plug in this lg wall charger...instead of offline battery widget it actually boots my phone upon plugin...so I root it...z4root 1.3...rom manager...clockworkmod manual flash...bam just like that everytime phone boots it loads recovery menu and I got no ok button...is there anyway to just get a normal boot...I still have vol up and vol down...and if I understood the sdk solution I could do it. My ?...can anybody help a lil?
Click to expand...
Click to collapse
Ok hey hood rat! 4 a long time thiz poast hazent mayke senze 2 me. U no I b sitn n muh krib trien 2 make senze ov ur post and jus kant. Lyk 4 egzampuhl, wut duz an lg wall chargur have 2 do with ur vibrant?
Hope I helped!!
djquick said:
Ok hey hood rat! 4 a long time thiz poast hazent mayke senze 2 me. U no I b sitn n muh krib trien 2 make senze ov ur post and jus kant. Lyk 4 egzampuhl, wut duz an lg wall chargur have 2 do with ur vibrant?
Hope I helped!!
Click to expand...
Click to collapse
Was that really called for?
Sent from my SGH-T959 using XDA Premium App
I don't think so. The okay is the power button..... At least on the Vibrant. On other phones it's the okay or enter button on the keyboard but never the home or back buttons. As a matter of fact the back button does what it's supposed to. Just my 2 cents.
xriderx66 said:
If I know right the home or back to utton is a ok select in clock work recovery.
Click to expand...
Click to collapse
The OP might be screwed at this point. Unless you can remap the keys in recovery?
Sent from my HTC Vision using XDA App
ChoctawT said:
Was that really called for?
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
Not really but very funny.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Bottom two are forward and back the power is selection
enoch861 said:
I don't think so. The okay is the power button..... At least on the Vibrant. On other phones it's the okay or enter button on the keyboard but never the home or back buttons. As a matter of fact the back button does what it's supposed to. Just my 2 cents.
The OP might be screwed at this point. Unless you can remap the keys in recovery?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Dude, did you not read his entire post or do you just not understand ebonics?
HIS POWER BUTTON IS GONE!!! If you have ever flashed a rom before with clockworkmod, you would know that the "Power" button is the Ok button, which he doesn't have anymore.
motiv8d365 said:
Ok ...is there anyway to just get a normal boot...I still have vol up and vol down...and if I understood the sdk solution I could do it.
Click to expand...
Click to collapse
Have you done anything to the file systems? Do you think it will still boot with just a hard reset? You can reset if its been rooted with adb. Do you have the sdk installed on your computer? If not, install the android sdk from the code.google site, and find an adb tutorial on this forum with the search tool..
Sent from my SPH-D700 using XDA Premium App
I can 100% fix this for you. I have a few extra buttons in stock. If you send me the phone, I can solder you on a brand new one. You are not screwed...
Just PM me if you are interested....
I am sorry to start a new a thread but for more than 2 hours trying to do this and no luck.
I have an X10a that for some reason is stuck on the Sony Ericsson logo anyway i have been trying to flash it using x10 flash tool but every time i get to where it says press back button and connect usb it just wont work it does not recognize its connected i have Win7 64 BIT. PLEASE HELP
Please help
Try taking the battery out hold back button plug in cable then put battery back in
Sent from my X10i using XDA Premium App
Tried no luck
There is an option under help i think that is called check driver or similar. Only if every driver is installed it works. If not make sure that you installed the driver from the driver dir. Also unpack the three archives, cause there are the hsusb driver.
Next time use the right section!
Sent from my X10 using xda premium
punkkeks said:
There is an option under help i think that is called check driver or similar. Only if every driver is installed it works. If not make sure that you installed the driver from the driver sir. Also unpack the three archives cause there are the hsusb driver.
Next time use the right section!
Sent from my X10 using xda premium
Click to expand...
Click to collapse
Where i cant and dont know where the help option?
OH I SEE CLICKED ON IT NOTHING HAPPENED
Then search it! There is an option in flashtool that will check your drivers. I wont make everything for you. If you don't know what you are doing, leave it!
Make a screenshot
Sent from my X10 using xda premium
punkkeks said:
Then search it! There is an option in flashtool that will check your drivers. I wont make everything for you. If you don't know what you are doing, leave it!
Make a screenshot
Sent from my X10 using xda premium
Click to expand...
Click to collapse
I did nothing happened i use to know how to do this and did it so much times before but after my COMA things haven't been easy.
Thank u for the advice i am not asking you to do everything for me
Alright. You plug in your device in flash mode and then click check drivers quick before the mode ends. Three lines should appear.
Also you have to check under your device manager if there are 3 semc devices. Make screenies and then we will se
Sent from my X10 using xda premium
punkkeks said:
Alright. You plug in your device in flash mode and then click check drivers quick before the mode ends. Three lines should appear.
Also you have to check under your device manager if there are 3 semc devices. Make screenies and then we will se
Sent from my X10 using xda premium
Click to expand...
Click to collapse
Thank you Sir but under device manager i dont have of the semc devices
I'm not a sir I'm just a guy from Germany. If you plug in your device, do you hear the plug sound from windows?
Sent from my X10 using xda premium
punkkeks said:
I'm not a sir I'm just a guy from Germany. If you plug in your device, do you hear the plug sound from windows?
Sent from my X10 using xda premium
Click to expand...
Click to collapse
No i dont i believe the issue is a USB driver
Bad. Try another USB port and if windows asks use the driver from the archives
Sent from my X10 using xda premium
punkkeks said:
Bad. Try another USB port and if windows asks use the driver from the archives
Sent from my X10 using xda premium
Click to expand...
Click to collapse
I did i even tried another PC
Use another USB cable and make sure that your USB port from your device is alright
Sent from my X10 using xda premium
punkkeks said:
Use another USB cable and make sure that your USB port from your device is alright
Sent from my X10 using xda premium
Click to expand...
Click to collapse
OK thanks.
Thank you very much man i appreciate it its flashing now all i had to do is change the usb cable
That's Murphy's law have fun
Sent from my X10 using xda premium
Hi,
Is there any video on internet where i can learn about how to change Galaxy S2 home button flex? Home button doesnt work and i cant root it without it.
bump! anyone know something about how to replace home button!?
Don't know how to fix the home button but use a usb jig to access download mode and root via odin.
Sent from my GT-I9100 using xda premium
igna200 said:
bump! anyone know something about how to replace home button!?
Click to expand...
Click to collapse
Theres a link in a thread I made about a motherboard.It shows a guy changing screen and also buttons/flexs....
Sent from my GT-I9100 using xda premium
theunderling said:
Theres a link in a thread I made about a motherboard.It shows a guy changing screen and also buttons/flexs....
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
give us the link please
thanks
NOMIOMI said:
give us the link please
thanks
Click to expand...
Click to collapse
Check the Video link below for the same
http://www.youtube.com/watch?v=65pvAINg2ME&feature=bf_next&list=HL1340367484
Can anyone please tell me how to start our Xperia s in safe mode?? I searched Google and it says while booting, press the Sony logo but doesn't work!!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
I don't think there is such a feature.
Harsh7689 said:
Can anyone please tell me how to start our Xperia s in safe mode?? I searched Google and it says while booting, press the Sony logo but doesn't work!!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
i have tried it on Sola hope it works for your S too..
when the phone boots let go Sony logo and when you come to the Xperia splashscreen and the phone vibrates once just after that touch the menu button continuously till you boot in safe mode by that i mean the right hand side feather touch button !!!
K900 said:
I don't think there is such a feature.
Click to expand...
Click to collapse
There is a feature bro
K900 said:
I don't think there is such a feature.
Click to expand...
Click to collapse
Yup there is, I read that in the battery thread for Xperia s in which doomlord had written that start the phone in safe mode and if the battery drain is still there, its due to a bug in android and if not it's due to an app!!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
whats the point of safe mode?
Sent with my Sony Xperia S using a little bit of KA magic.
i reboot in safe mode successfully but what its for?
mharckk said:
i reboot in safe mode successfully but what its for?
Click to expand...
Click to collapse
As I said before just to check if the app is causing wakelocks or system itself!!!
Between how did you manage to boot in safe mod on Xperia S LT26i ??
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Hi all...I have 1problem with my screen..after stand by I can't open the screen..and I press the top of button alot of time. It out...why ?? Everybody help me please ...thanks.
Sent from my ST18i using xda app-developers app
lyhengboy said:
Hi all...I have 1problem with my screen..after stand by I can't open the screen..and I press the top of button alot of time. It out...why ?? Everybody help me please ...thanks.
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
Hi
It is a bit hard to work out what is wrong - you need to explain a little more. What do you mean "It out...why ?"
Maybe someone could help then.
:fingers-crossed:
It mean I can use it normal ..but after Stanby I press home button it becomes dark ( but have light ). And I press power button several time .. it become normal. Why ??? Help me...
Sent from my ST18i using xda app-developers app
lyhengboy said:
It mean I can use it normal ..but after Stanby I press home button it becomes dark ( but have light ). And I press power button several time .. it become normal. Why ??? Help me...
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
It's been a while since I fixed mobiles but it sounds like a hardware issue. (I have heard this can be the LCD but it sounds more like the motherboard.)
Have you updated the phone recently or put on new apps?
Before trying to fix it - try uninstalling any new apps, a factory reset or if you recently updated the phone, try downgrading it.
Hope this helps until someone gives you a definite answer.
jordan0001 said:
It's been a while since I fixed mobiles but it sounds like a hardware issue. (I have heard this can be the LCD but it sounds more like the motherboard.)
Have you updated the phone recently or put on new apps?
Before trying to fix it - try uninstalling any new apps, a factory reset or if you recently updated the phone, try downgrading it.
Hope this helps until someone gives you a definite answer.
Click to expand...
Click to collapse
did u use any cpu controller or something..?
looks like your cpu got busy that moment. Just do the hardway with unplug the battery.
Unless it happened many times, you'd better do like what jordan0001's suggest, factory reset or upgrade or downgrade
Thanks...maybe I'll should try...to upgrade it...:thumbup:
Sent from my X8 using xda premium