I've bought this Coolpad 7295 phone for less than three days from China.
It seems that I couldn't flash my phone back to the state where I could get the service for calling the first day.
After the second rom flashing with my flash tool. I kind of formated the Yl-parames and NVRAM section of the phone.
I don't know these two mean! Could someone explain how they work? Are they related to the hardware or the motherboard of the phone?
After the wrong formatting action, my phone could not make any calls. (But everything works, and network works also. And later I flashed many roms, all of them work, just no signal)
So the third picture shows that this device has a different partition compared to the most smartphones in the hardware called "YL-parames".
My friend who is good at making custom roms in Taiwan said I might accidentally screw up with the hardware partition.
I just want to know with this problem appearing, is there any other way that I could get my signal back?
I've tried several methods like rewriting IMEIs, reinstalling the official roms, but none of them work.
Or should I just send it back to the dealer to get it fixed? (I'm doing it right now...)
Just want to know in case the phone is back, how should I operate this flashing tool because I'm really a tech-savy
1) The first picture represents what i chose for the outcome of no signals later on.
2) The next one is its interface
3) The next one is the official flashing tool, but I still can not flash the CPB provided by the official since my hardware seems to be broken.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would really like somebody to develop the custom rom in the English version for this device, this device is pretty good!
Or is there anybody using this phone as well? It's nice to have someone to exchange info with!!
Related
Hi guys,
i have 2 phones , both are x10. and both have problems :crying:
My 1st x10 have this problem today,
sim signal full bars then suddenly drops everything going to "no service" then after a while, it comes back... whenever im in a location that has weak signal... the phone never gets any signal...
Plus., the phone also warms up more that normal.
i have experience opening up this phone and explored every possible signs of grounding but looks like there is none, i have 2 extra batteries for the phone and it rules out that its not the batteries at fault.
btw, i have also tried reflashing to stock global tft > 3.0.1.G.0.75 Global ggl generic 1232-9897 from THeLogiC ' s stock rom collection ( http://forum.xda-developers.com/showthread.php?t=1749426) > still the same effect on the phone.
My 2nd x10 has no gsm signal plain and simple, even inserting numerous sims to test. its already openline., It says "please insert sim card and restart your phone" every time you turn it on.
heres a pic from s1tool , tried restore also but nada. >
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
x10i Android 2.3.3 generic stock rom atm.
before they had xrecovery .3 and both had DiXperia Extraordinary Roms.
Hope someone can help me cuz this already drove me mad.
come on guys, at least answer me . . .
this is related to the radio being lost because i attempted to unlock the bootloader to a docomo phone with locked bootloader. thats my thought to the one x10. but the other one, i think its HW problem with the signal not being stable and all...
if someone could just point me in the right direction so at least i can fix one phone, that will make me very happy.
please anybody help me i need the firmware files for a hard bricked iphone 5s clone with MT6571 chipset.
unfortunately i got the phone in such a condition that it was not booting up but i could still open the factory mode and from there i found that the chipset is MT6571 but could not get much info. as the factory mode was in chinees language. I got a snap of the factory mode and here's the dropbox link of snap:
https://www.dropbox.com/s/hm5b8zdup9emuf3/IMG_5s-Clone.jpg?dl=0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please help me with the flash files..
thank you
plz help me if anybody can
plz give me a link to the above mentioned flash files
sujeet27yadav said:
plz help me if anybody can
plz give me a link to the above mentioned flash files
Click to expand...
Click to collapse
If you have not had any replies, then I'm afraid its for several reasons.
You can't get "flash" files for mediatek chips set phones, they simply do not exist anywhere.
You can only "flash" something on a device that has the architecture to allow flashing (ie a Qualcomm) I'm pretty sure you need to build your own twrp/clockwork mod recovery yourself for your pacific device.
Mediatek chipset devices are notoriously difficult to mod in anyway, and always the easiest to brick.
I'm no expert but you really need to have someone explain this to you, your phone is bricked and there is no way to recover it.
Its the very reason after having two of these very cheap Chinese clone phones that both went wrong after only a few months I will never purchase such a device again, even after one came to me pre rooted and with CWM installed, that did not stop it going horribly wrong after 6 weeks usage.
My only advice to you is to google the make/brand along with the model number firmware(for example this is how I did it)
Example-Epade S90 (NEO N002) 4.5 firmware
But its doubtful you would be able to flash anything as you won't have any working recovery, and most of the website for these firmwares will be in Chinese.
This is my own experience, not something I have read, someone with a lot more knowledge than me needs to explain this to you in a way you may understand more than I can explain.
Sent from my XT1524 using XDA-Developers mobile app
Hi there,
I'd really be grateful for any help anyone can give. Yesterday, my Honor 7C got stuck in a boot loop, restarting at the blue Honor screen continually until the battery runs out. It's impossible to boot it into recovery mode using any combination of key presses. It just keeps restarting.
Can someone please help? I don't really mind losing the phone, but ideally I would like to save some of the data on it, as it had been a while since I backed up.
I understand that the way to do this might be to flash the stock ROM, root the phone and then run a data recovery program like EaseUs. Is this correct?
Also, I have tried to flash the stock ROM but really have no idea how to do it. I got half way through using SP Flash Tool before I realised that the Honor 7C is not a Mediatek phone.
Also, I can't find the stock ROM (LND-L29) anywhere except on pretty dodgy looking websites. Is there a reliable source for stock ROMs anywhere?
Any help would be really gratefully received. Thanks!
B7C
@Bricky7C
Your Honor 7C has a Qualcomm chip-set hence you might use free-of-charge QPST ( read: Qualcomm Product Support Tool ) to re-flash device's Stock ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Turns out my bootloop was caused by a hardware problem after all - ripping open the side of the phone solved it.
However, for anyone who stumbles across this thread with a similar problem, jwoegerbauer's suggestion of QPST was very helpful, but the tool on the site would not install for me on Windows 10. I kept getting an "installation was interrupted error". However, I found a working version of the tool at:
androidmtk dot com fslash download-qpst-flash-tool
[I'm a new user so XDA won't allow me to post a URL]
I scanned for viruses and the installation didn't cause me any issue, though I never ended up having to use it in the end.
So I have this phone Xiaomi Redmi 10X, and I wanted to put Pixel Experience 11.0 in it, after seeing this thread on GitHub.
To my surprise, following steps on that link was not that easy!
I flashed MIUI 22.1.19 manually (not in the correct way), and I ended up with a hard bricked phone.
Yesterday, while Googling about that, I managed to run into a tool called MTKClient v2.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and it solved my problem, by flashing original firmware and got it correctly working with the default MIUI 13 system.
BUT, that wasnt enough for me, because I still wanted to put Pixel Experience in it since I like it so much and think it is so sexy!!! So I, without knowing what I was doing, erased all the partitions in my phone with that tool.
Now, I cant get it to connect to that tool to work or connect with my device. On the cmd behind though, I do get some hope after seeing that device is still recognized in some way, but that's all there is to it, it doesnt go further, only "Phone detected: Reading model info".
I've tried to wait and keep both volume buttons pressed at the same time, but to no avail.
Since this, I've tried several tools but none is working to reset my partition table to original state, since I think that's my problem.
Any idea how to fix it?
Jjflick said:
Did you try cross-patching it with a razor cable?
Click to expand...
Click to collapse
No. What is that?
Jjflick said:
Did you try cross-patching it with a razor cable?
Click to expand...
Click to collapse
Even if it connects, it shows no partitions to write over.
What it needs, is to first restore the erased partitions, I think, and then writing (flashing) the firmware into it.
Ok, so i got this random Huawei P20Lite right?
Back isnt pealed off, works fine, no damages.
BUT WAIT... About Works Fine... It Wont really boot up into The OS!!!
Somethimes shows this really weired Image when pluged in and charging the phone, or randomly:
A green Screen with a Red Square on Top and a Blue one Down.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not My Picture
It will then boot up and greed you with A:
Again, not my Picture.
Acording to Huawei, You have to Use HiSuite to recover it.
1. Put the Phone into Fast Boot. AND conect to PC
2. Open HiSuite on Your PC and click on Recovery mode or whatever its called.
3. i donk know i forgot.
anyways, i get this nice little message
(In translated, this means That: Your Device doesnt support System Recovery.
Bro wth
Anyways, our phone story doesnt end there...
I tried doing it without the Computer.
using eRecovery!!! not surprising i know...
Still, it was stuck on booting animation trying to enter eRecovery.
According to Huawei, "this message is displayed when a system file is replaced or modified, or the system is manually updated to an unofficial version". They were responding to another user with the same issue as mine.
I think that this is the Issue. Still, the instructions to fix it, dont work. (as tested above.)
Tutorials show the eRecovery method without the PC.
Here are some info i found:
Another Guy having the same issue:
i forgot the link but someone else on XDA Had the same issue.
please help!!!
hello sir did you have any luck resolving this issue (I've purity much looked every were but I had no chance)