Related
Okay so I am stuck on the recovery screen. I have rebooted several times and I have ended up in the same place. I also chose wipe data/factory reset and wipe cache partition. Some one help
ya know, some steps of what you have done before hand will probably help, what rom did you have, what have you done etc etc,
So either you have sticky buttons or your gonna need to re-flash a rom, but as we dont know wether you mean recovery or cwm recovery this post is about as much help as a chocolate fire-guard in all honesty,
If you are on CWM download a connect your phone up via mounts and storage put the rom on your phone and install it via zip,
if your stock by the sounds of it something went bad...... try grabbing a rom from samfirmware and flash it via odin.
usually happens if you format system partition, if you dont have a hardware issue simply flash stock ROM using odin
I already flash stock rom but im still stuck at the android system recovery e3
Download mode and flash a stock rom . Boot it to run and let it set up .
jje
Is Kernel_I9100DXKL3.tar.md5 a stock rom sorry im noob
No its a KERNEL .
jje
Example of stock rom? GT-I9100_DXKL3_original??? sorry i need you help
If you are on CWM download a connect your phone up via mounts and storage put the rom on your phone and install it via zip,
This option is there in CWM but we cant mount it, I tried many times...
So it is always a good idea to keep your running custom ROM zip file on your SDcard undeleted, to flash on the emergency even while you are on the go...
yesturday only my son fingured my phone and got non stop FC...just flashed ROM again but bootloop, flashed again after Factory Reset...worked.
---------- Post added at 02:39 PM ---------- Previous post was at 02:32 PM ----------
min469 said:
Example of stock rom? GT-I9100_DXKL3_original??? sorry i need you help
Click to expand...
Click to collapse
jsut read the complete guide in the link in my signature "All Stock Roms & Guide How to use ODIN"
and download any then see how it looks like....
http://forum.xda-developers.com/showthread.php?t=1075278
i say you read first as you have zero knowledge.
inshort download stock firmware, flash using odin.
Im still stuck on CWM even after stock roming it.
min469 said:
Im still stuck on CWM even after stock roming it.
Click to expand...
Click to collapse
what do you mean by stock roming, and waht did you do?
I flash stock rom on my phone but still stuck on cwm, i not really sure what i did to my phone before the problem
min469 said:
I flash stock rom on my phone but still stuck on cwm, i not really sure what i did to my phone before the problem
Click to expand...
Click to collapse
which CWM???, once you successfully flash a stock rom from ODIN, then you will get only stock recovery...what happens after flashing automatically reboot to Recovery?????
Yup i got the Android system recovery e3 now, now im stuck there
more information you give more you will get help,
we cant help with least information,
Try to flash cwm or siyah in recovery. Then flash some rom and see if that helps
Sent from my GT-I9100 using XDA
I flash cwm and flash some rom but still stuck on the cwm )):
Can u upload a pic of which recovery mode your on? Your best bet is go to samfirmware download a rom for your country or what ever you want put phone in download mode, install kies on your open task manager make sure kies isnt running grab odin and flash the stock rom,
Sent from my GT-I9100 using Tapatalk 2
I am in the same situation, stuck on the CWM Android system recovery screen. My Kernel is fine, I entered it not realizing I couldn't get out because my home button hasn't worked in over a year. I've tried resetting with the power button, and the power button + down key, but it always comes back to this screen. All I need to do is select the "reboot system now" button but without a Home Key I can't select it. Any way around this?
OK so Im on AOKP milestone 6 with the devil kernel and i went in to recovery to wipe cache and dalvik cache and when i pressed reboot system it goes back to recovery!!!! please help as I really don't want to reflash everything!!! Thanks.
I had this same problem until I flashed TWRP. When I rebooted, it instead loaded the OS, but it still had Devil Recovery. WTF?
Have you tried re-flashing the rom without wiping data?
Sent from my SCH-I500 using xda premium
I can't flash anything because i can't put anything on the sd card because i cant get out of recovery!
ThePlasticBling said:
I can't flash anything because i can't put anything on the sd card because i cant get out of recovery!
Click to expand...
Click to collapse
i have the same problem i cant get out of recovery, cause the rom i flashed is all screwed up
android_noob01 said:
i have the same problem i cant get out of recovery, cause the rom i flashed is all screwed up
Click to expand...
Click to collapse
Try flashing CWM recovery again using Heimdall or Odin. Once it boots into recovery, flash TWRP or another recovery of your choice, then reboot and hopefully you will see your boot animation. That's what I did to get AOKP build 40 to boot again (though strangely enough, it's stuck with Devil recovery even after flashing TWRP). Hope this helps you guys out. And be sure to make backups!
UndeadSquirrel said:
Try flashing CWM recovery again using Heimdall or Odin. Once it boots into recovery, flash TWRP or another recovery of your choice, then reboot and hopefully you will see your boot animation. That's what I did to get AOKP build 40 to boot again (though strangely enough, it's stuck with Devil recovery even after flashing TWRP). Hope this helps you guys out. And be sure to make backups!
Click to expand...
Click to collapse
Again, how can i put twrp on my sd card if i'm stuck in recovery? Is there a link for an odin version of twrp
You should be able to mount your SD card in recovery anyway. If not, take it out and insert it into an adapter to plug into your computer. I don't know if there's an Odin version of TWRP, I flashed it in CWM recovery.
I would read droid styles guide first if you have not yet as it has all the answers you will need. You just need to read through it and following the directions.
Sent from my SCH-R530U
how do i mount my sd card and open it on my pc in recovery?
If you're using CWM, it's under Advanced or Mounts and Storage. Plug in the USB cable like you normally would.
UndeadSquirrel said:
If you're using CWM, it's under Advanced or Mounts and Storage. Plug in the USB cable like you normally would.
Click to expand...
Click to collapse
I try to install twrp but it says installation aborted. I'm really starting to get sick of this phone and its stability issues.
You got the zip, right? It's in the Fascinate development section of the forums.
There is nothing wrong with the phone. I don't understand why you can't just Odin back to stock and start over. With the amount of time you have been stuck in recovery you could have fixed it by now. It you could follow droid styles guide to get out of the recovery loop without going back to stock. Something tells me you really just want a new phone...am I close???
Sent from my SCH-R530U
shelby04861 said:
There is nothing wrong with the phone. I don't understand why you can't just Odin back to stock and start over. With the amount of time you have been stuck in recovery you could have fixed it by now. It you could follow droid styles guide to get out of the recovery loop without going back to stock. Something tells me you really just want a new phone...am I close???
Sent from my SCH-R530U
Click to expand...
Click to collapse
Sent from my SCH-R530U
Don't you belong in a different section?
Anyway, sorry for getting snippy, I was just really tired and frustrated. I did use the .zip from the forums.
If you've already tried Heimdall-flashing CWM again, and that didn't work, then I suggest you Odin back to stock as shelby suggested. If you haven't made a nandroid already, do so, then revert back to stock and start from scratch. You can try restoring your nandroid once you're no longer stuck in recovery.
ThePlasticBling said:
Sent from my SCH-R530U
Don't you belong in a different section?
Anyway, sorry for getting snippy, I was just really tired and frustrated. I did use the .zip from the forums.
Click to expand...
Click to collapse
I have a mez and I just got the sgs3 a little while ago. You need to check out section 8 or 9 I think of the guide. It tells you exactly how to get out of your situation.
Sent from my SCH-I500 using Tapatalk 2
There's also a topic about the "three-finger recovery boot loop" fix. You could try that.
Hi not allowed to post to developer area, so hope I can get help here. Thought I did everything right, sbf to stock 2.3.4, rooted, used clockworkmod recovery to back up, downloaded cm10, gapps, wiped,everything went to unzip rom and got a sd card error (system 7) had to sbf back to 2.3.4 again and redo everything, formatted sd card with phone, rerooted, downloaded tried again, same error. What did I do wrong?? I thought it would be pretty bulletproof. Used directions and a couple of youtube videos to help.
Kind of afraid to try again because its alot of work to get back. Is the problem with my sd card?, my phone, the downloads?? really want jellybean on my x2 hated the fact we didnt get upgraded to ICS
Any help would be greatly appreciated
don't unzip it, install zips in cwm recovery
see vid https://www.youtube.com/watch?v=zxPvEbdrfKs&feature=youtube_gdata_player
more here http://forum.xda-developers.com/showthread.php?t=1759431
How to install xm10 alpha 2 jelly bean
https://www.youtube.com/watch?v=Itpk...e_gdata_player
Also don't use CWM... use our custom BSR and the CM7 patched BSR when on CM10.
GoClifGo05 said:
Also don't use CWM... use our custom BSR and the CM7 patched BSR when on CM10.
Click to expand...
Click to collapse
good point, but he didn't wipe data and cache in cwm, so it was dx2 bsr or android recovery
edit: so dberryann how did you get to recovery?
sd_shadow said:
good point, but he didn't wipe data and cache in cwm, so it was dx2 bsr or android recovery
edit: so dberryann how did you get to recovery?
Click to expand...
Click to collapse
didnt make it to recovery either time. because I wiped, couldnt get to recovery, stuck on motorola icon, so I sbf'ed back to 2.3.4 and reloaded all my stuff. My two attempts didnt go well. I thought the problem was in the sd card, so I erased it. Should I have formatted it to FAT 32 with Windows 7? didnt
sd_shadow said:
don't unzip it, install zips in cwm recovery
see vid https://www.youtube.com/watch?v=zxPvEbdrfKs&feature=youtube_gdata_player
more here http://forum.xda-developers.com/showthread.php?t=1759431
How to install xm10 alpha 2 jelly bean
https://www.youtube.com/watch?v=Itpk...e_gdata_player
Click to expand...
Click to collapse
Didn't unzip, wrote that wrong, used cwm recovery to install the zip from sd card, then got the error sorry for the confusion
dberryann said:
Didn't unzip, wrote that wrong, used cwm recovery to install the zip from sd card, then got the error sorry for the confusion
Click to expand...
Click to collapse
the point was, that you couldn't have used cwm, because it doesn't work with dx2
we have bsr/system recovery, which looks and works like cwm
the question was how you got to where you wipe data
was it through system recovery app and wall charger or
android recovery through rom manager or boot options
---------- Post added at 10:21 PM ---------- Previous post was at 10:18 PM ----------
in bsr did you select install zip from sdcard? not install update
---------- Post added at 10:26 PM ---------- Previous post was at 10:21 PM ----------
pretty sure a status 7 error, is a apply update error
sd_shadow said:
the point was, that you couldn't have used cwm, because it doesn't work with dx2
we have bsr/system recovery, which looks and works like cwm
the question was how you got to where you wipe data
was it through system recovery app and wall charger or
android recovery through rom manager or boot options
---------- Post added at 10:21 PM ---------- Previous post was at 10:18 PM ----------
in bsr did you select install zip from sdcard? not install update
---------- Post added at 10:26 PM ---------- Previous post was at 10:21 PM ----------
pretty sure a status 7 error, is a apply update error
Click to expand...
Click to collapse
the apk file I used for recovery was: MOTODX2_Bootstrap_signed.apk. is that the one I was supposed to use? Should I be using the patched version? I am on rooted stock 2.3.4 Yes, I selected install zip from sdcard.
not really an answer to my question, how you got to recovery
but yes that's the correct one
the zip may be corrupt, redownload and/or compare md5 checksums
---------- Post added at 10:56 PM ---------- Previous post was at 10:46 PM ----------
md5 checker http://download.cnet.com/md5-checker/3000-2092_4-10410639.html
---------- Post added at 11:06 PM ---------- Previous post was at 10:56 PM ----------
cm10 alpha 2 MD5 Sum: 357688cee005e557de4f1e1f1b81d721
dberryann said:
the apk file I used for recovery was: MOTODX2_Bootstrap_signed.apk. is that the one I was supposed to use? Should I be using the patched version? I am on rooted stock 2.3.4 Yes, I selected install zip from sdcard.
Click to expand...
Click to collapse
tried again with a new sd card... downloaded zip file again, re backed up, checked the md5 got a match, went into recovery with the charger cable, wiped everything, installed zip from sd and got the same error message:
set_perm: some changes failed E:error in /sdcard/cm-10-20121007-unofficial-daytona.zip (Status 7) installation aborted
any ideas?
I don't understand why you are having problems.... from stock 2.3.4 boot into BSR... install CM10, install GApps, then wipe data and cache and reboot......
Just to clarify the bsr should be downloaded.. placed on the root of your SD card, install via a file manager like root explorer or anything similar... you should then have an app called system recovery. Open it and press install recovery, plug into a wall charger and press recovery mode...
Sent from my MB870 using xda premium
If on stock rooted 2.3.4 follow this:
1. Download and install moto dx2 bsr
2. Click on system recovery in app drawer. It should be a grey background with dark grey droid.
3. Click install recovery. Should be first of 3. Select OK when notification says successfuly installed.
4. Plug in charger.
5. Select recovery mode.
6. Phone should power down and then boot into recovery.
7. Use volume controls to scroll down and select "backup and restore" with power button. Then select backup next, then select external.
8.When backup is finished. Wipe cache, dalvik cache and wipe data.
9. Chose install zip from SD card. Then chose install from external ,if that is where you have it.
10. Chose ROM and let install. After installed scroll down to " Go Back" and select.
11. Repeat step 9 and chose gapps package. Let install. After installed scroll down to "Go Back".
12. Select reboot system now.....Enjoy..
NEVER SELECT REBOOT RECOVERY....
Thought you were to wipe data and cache after installing the ROM anand GApps. That's how I've always done it.
Sent from my JB'd X2
I have always wipe before install. Wiping before so you have clean slate when you flash. I don't think it really matters
Sent from my MB870 using xda premium
with a moto phone, it's not a bad idea to wipe before and after
Sent from my MB870 using xda premium
dberryann said:
didnt make it to recovery either time. because I wiped, couldnt get to recovery, stuck on motorola icon, so I sbf'ed back to 2.3.4 and reloaded all my stuff. My two attempts didnt go well. I thought the problem was in the sd card, so I erased it. Should I have formatted it to FAT 32 with Windows 7? didnt
Click to expand...
Click to collapse
You should try the flashable x2 recovery. Leave both on your sd card
Here's are the downloads, the re recovery zips are the flashable bsrs.
http://db.tt/wV38HpHu
Sent from my MB870 using Xparent SkyBlue Tapatalk 2
styleKIMCHEE said:
You should try the flashable x2 recovery. Leave both on your sd card
Here's are the downloads, the re recovery zips are the flashable bsrs.
http://db.tt/wV38HpHu
Sent from my MB870 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Finally got it!! Couldnt play for a few days... Decided to sbf and go from scratch, reroot, backup and install. Went really well thanks for all the help from you guys.
Runs like a charm. Hard to believe that Motorola and Verizon couldnt do the same thing...
dberryann said:
Finally got it!! Couldnt play for a few days... Decided to sbf and go from scratch, reroot, backup and install. Went really well thanks for all the help from you guys.
Runs like a charm. Hard to believe that Motorola and Verizon couldnt do the same thing...
Click to expand...
Click to collapse
It's simple. In your last sentence "couldn't" should simply be replaced with won't. Not worth it to them, buy new stuff... that's their philosophy.
OK, so I successfully S-Off'd this phone using DirtyRacun. I backed up the stock functioning ROM, then went to flash Viperlte 2.2.0. Went through all the Aroma installer options, then went to flash. It breezed through the install process, leaving the phone without any operating system on it (Recovery didn't actually flash anything). Tried both CWM and TWRP, and same results each time.
So, I decided to simply try flashing the boot.img in the downloads for Viperlte 2.2.0 via fastboot, and after doing that, the phone still won't boot, and now whenenver I try to reboot into recovery, recovery flashes for a second, and then screen goes blank and boot loops.
Tried reflashing the stock boot.img and reflashed recoveries, same results each time. I'm at a loss. I don't understand what got messed up by fastboot flashing the boot img.
Any help is greatly appreciated!
Boostjunky said:
OK, so I successfully S-Off'd this phone using DirtyRacun. I backed up the stock functioning ROM, then went to flash Viperlte 2.2.0. Went through all the Aroma installer options, then went to flash. It breezed through the install process, leaving the phone without any operating system on it (Recovery didn't actually flash anything). Tried both CWM and TWRP, and same results each time.
So, I decided to simply try flashing the boot.img in the downloads for Viperlte 2.2.0 via fastboot, and after doing that, the phone still won't boot, and now whenenver I try to reboot into recovery, recovery flashes for a second, and then screen goes blank and boot loops.
Tried reflashing the stock boot.img and reflashed recoveries, same results each time. I'm at a loss. I don't understand what got messed up by fastboot flashing the boot img.
Any help is greatly appreciated!
Click to expand...
Click to collapse
how did you install recovery, the first time you must use adb and flash the recovery.img.
command is: fastboot flash recovery(what ever here).img example: fastboot flash recovery recovery-clockwork-touch-6.0.2.9-fireball.img
Ok, have the phone booting again (flashed ruu, then reflashed the dirtyracun hboot). Question still remains, why did I start bootlooping recovery after flashing the boot.img? And why wouldn't the Rom actually flash in recovery?
Again, any insight is appreciated.
Boostjunky said:
Ok, have the phone booting again (flashed ruu, then reflashed the dirtyracun hboot). Question still remains, why did I start bootlooping recovery after flashing the boot.img? And why wouldn't the Rom actually flash in recovery?
Again, any insight is appreciated.
Click to expand...
Click to collapse
flash the rom then the boot img then boot.
Aldo101t said:
how did you install recovery, the first time you must use adb and flash the recovery.img.
command is: fastboot flash recovery(what ever here).img example: fastboot flash recovery recovery-clockwork-touch-6.0.2.9-fireball.img
Click to expand...
Click to collapse
Yeah, did that. I was in recovery (TWRP) when I tried flashing Viperlte, but it never flashed the Rom after selecting all the options in Aroma. It stated that it did, but there's no way it did. It took less than a second to go from "installing" to "complete".
So, something is funky there.
Boostjunky said:
Yeah, did that. I was in recovery (TWRP) when I tried flashing Viperlte, but it never flashed the Rom after selecting all the options in Aroma. It stated that it did, but there's no way it did. It took less than a second to go from "installing" to "complete".
So, something is funky there.
Click to expand...
Click to collapse
what version of twrp are you using
---------- Post added at 08:47 PM ---------- Previous post was at 08:45 PM ----------
for what it's worth some of the guys had problems, and went back to 2.3.3 and solved the problem, I've never had a problem and i'm running 2.4.4
also you must wipe cache,dalvic, data/factory reset,system
Aldo101t said:
what version of twrp are you using
---------- Post added at 08:47 PM ---------- Previous post was at 08:45 PM ----------
for what it's worth some of the guys had problems, and went back to 2.3.3 and solved the problem, I've never had a problem and i'm running 2.4.4
Click to expand...
Click to collapse
I was on the latest release of TWRP (2.4.4.0). I have a recovery log from when it wouldn't flash the ROM. I'll spare the unnecessary strings, and just post the error itself:
error: file_write: write: I/O error
Installer Error (Status 1)
Edit: Just to add, I just successfully flashed SuperSU on the stock ROM using the same TWRP version (2.4.4.0).
Boostjunky said:
I was on the latest release of TWRP (2.4.4.0). I have a recovery log from when it wouldn't flash the ROM. I'll spare the unnecessary strings, and just post the error itself:
error: file_write: write: I/O error
Installer Error (Status 1)
Edit: Just to add, I just successfully flashed SuperSU on the stock ROM using the same TWRP version (2.4.4.0).
Click to expand...
Click to collapse
well, I don't know for sure i'd try 2.3.3 and see what happens
Aldo101t said:
well, I don't know for sure i'd try 2.3.3 and see what happens
Click to expand...
Click to collapse
I appreciate the suggestions. I'll give a few things a try.
Looks like it was the recovery, afterall. Flashed 2.3.3.0, and the ROM is currently flashing as we speak.
Thanks again!
Boostjunky said:
Looks like it was the recovery, afterall. Flashed 2.3.3.0, and it's currently flashing as we speak.
Thanks again!
Click to expand...
Click to collapse
anytime
Aldo101t said:
what version of twrp are you using
---------- Post added at 08:47 PM ---------- Previous post was at 08:45 PM ----------
for what it's worth some of the guys had problems, and went back to 2.3.3 and solved the problem, I've never had a problem and i'm running 2.4.4
also you must wipe cache,dalvic, data/factory reset,system
Click to expand...
Click to collapse
Hmmm, what's going on here? Aldo101t, do aroma installers work for you on 2.4.4.0? I wonder if its a simple reboot after flashing recovery problem. I need a way to reproduce this.
Sent from my Incredible 4G LTE using Tapatalk 2
mdmower said:
Hmmm, what's going on here? Aldo101t, do aroma installers work for you on 2.4.4.0? I wonder if its a simple reboot after flashing recovery problem. I need a way to reproduce this.
Sent from my Incredible 4G LTE using Tapatalk 2
Click to expand...
Click to collapse
I confirm aroma not working on 2.4.4.0 at least on my end.
http://img716.imageshack.us/img716/3192/1362812254888.png
mdmower said:
Hmmm, what's going on here? Aldo101t, do aroma installers work for you on 2.4.4.0? I wonder if its a simple reboot after flashing recovery problem. I need a way to reproduce this.
Sent from my Incredible 4G LTE using Tapatalk 2
Click to expand...
Click to collapse
well, i'm not sure. when i tried to flash viper 2.2 i had a problem, but i can't remember what i did now. i used the same recovery, got it installed, i think i restored a stock rom then reflashed viper and it worked, but i'm not sure.
it's been awhile since i've tried to flasn with aroma, so
i just tried flashing viper 2.2, DID NOT WORK, so i miss spoke.sorry
I have also had problems with aroma on several builds of twrp and several builds of cwm. I'm currently on cwm touch and if it fails to install (goes from 7% to done in a few seconds) just try it again till it flashes. Also seems to help me if zips are on the ext SD card. Not sure what's up with this but that's how I got it to work. Seems to be an aroma thing. Regular zips have no problems flashing.
Sent from my Incredible 4G LTE using xda premium
I'm going to tl;dr this but, I unlocked my bootloader, installed 4EXT, forgot to root my phone and tried flashing a rom.
It didn't work, it was stuck on the boot screen.
I thought clicking the factory reset button would flash the stock rom and make it as if it was new but nope, it stopped internal storage from mounting so now I can't flash anything and I'm stuck with a rom that won't actually get past the boot screen. Before you ask, yes I am a noob. Please help?
Unoriginal_Name said:
I'm going to tl;dr this but, I unlocked my bootloader, installed 4EXT, forgot to root my phone and tried flashing a rom.
It didn't work, it was stuck on the boot screen.
I thought clicking the factory reset button would flash the stock rom and make it as if it was new but nope, it stopped internal storage from mounting so now I can't flash anything and I'm stuck with a rom that won't actually get past the boot screen. Before you ask, yes I am a noob. Please help?
Click to expand...
Click to collapse
follow the 2nd post of this thread for stock flashing,here is the link...
http://forum.xda-developers.com/showthread.php?t=2229807
---------- Post added at 12:28 PM ---------- Previous post was at 12:20 PM ----------
Unoriginal_Name said:
I'm going to tl;dr this but, I unlocked my bootloader, installed 4EXT, forgot to root my phone and tried flashing a rom.
It didn't work, it was stuck on the boot screen.
I thought clicking the factory reset button would flash the stock rom and make it as if it was new but nope, it stopped internal storage from mounting so now I can't flash anything and I'm stuck with a rom that won't actually get past the boot screen. Before you ask, yes I am a noob. Please help?
Click to expand...
Click to collapse
and please,do your own research before flashing anything on your device... read the Q&A threads,posts,there are hundreds of them...
quick help for your reading, here
http://forum.xda-developers.com/showthread.php?t=1679486